Using IP Addressing in
the Network Design
Designing and Supporting Computer Networks – Chapter 6
ITE I Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
1
Objectives

Describe the use of a hierarchical routing and
addressing scheme

Create the IP address and naming scheme to support
growth and efficient routing protocol operation

Describe IPv6 implementations and IPv6 to IPv4
interactions

Implement IPv6 on a Cisco device
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
2
Describe the Use of a Hierarchical
Routing and Addressing Scheme
Functions of a hierarchical addressing scheme:
 Prevent duplication of addresses
 Control access, monitor security and performance
 Support modular design and scalability
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
3
Describe the Use of a Hierarchical
Routing and Addressing Scheme
 Poorly-planned IP addressing can result in
discontiguous subnets
 Routing protocols may display more than one summary
route to discontiguous subnets
 Manual configuration of routing protocols may be
required
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
4
Describe the Use of a Hierarchical
Routing and Addressing Scheme
 VLSM provides more efficient use of IP address space
 VLSM enables routers to summarize routes on
classless boundaries
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
5
Describe the Use of a Hierarchical
Routing and Addressing Scheme
 CIDR ignores classful boundaries
 CIDR enables supernets: VLSMs with shorter prefix
lengths than the defaults
 Summarization produces leaner routing tables
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
6
Create the IP Address and Naming
Scheme
 Plan the entire
addressing scheme in
advance
 Allow for significant
growth
 Support the physical
layout, routing, and
security
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
7
Create the IP Address and Naming
Scheme
 Define the addressing blocks scheme to support
summarization
 Document locations, VLAN or network type, and
number of hosts and networks
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
8
Create the IP Address and Naming
Scheme
 Select the
appropriate routing
protocol to use in the
network
 Support classless
routing and VLSM
 Small and infrequent
updates to reduce
traffic
 Fast convergence
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
9
Create the IP Address and Naming
Scheme
Factors in designing the routing strategy:
 Load balancing
 Authentication
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
10
Create the IP Address and Naming
Scheme
 Determine when and how to summarize address space
for efficient routing
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
11
Create the IP Address and Naming
Scheme
 Design an address scheme for an internetwork and
assign ranges for hosts, network devices, and the
router interface
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
12
Create the IP Address and Naming
Scheme
 Determine an appropriate naming scheme
 Use codes and avoid names that easily identify
protected resources
 Maintain consistency
 Document the names
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
13
Describe IPv6 Implementations and IPv6
to IPv4 Interactions
Enhancements available with IPv6:
 Mobility and security
 Simpler header
 Address formatting
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
14
Describe IPv6 Implementations and IPv6
to IPv4 Interactions
Common transition
methods from IPv4 to
IPv6:
 Dual stack
 Tunneling
 Proxying and
translation
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
15
Describe IPv6 Implementations and IPv6
to IPv4 Interactions
How to configure IPv6 on a Cisco device:
 Activate IPv6 forwarding
 Configure interfaces
 Configure name resolution
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
16
Describe IPv6 Implementations and IPv6
to IPv4 Interactions
RIPng for IPv6:
 The tag parameter in
interface configuration
mode
 The ipv6 rip name enable
command on directlyconnected routers
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
17
Summary
 Allocation of IP addresses must be planned and
documented.
 A properly-designed hierarchical IP addressing scheme
makes it easier to perform route summarization.
 A complex hierarchy of variable-sized networks can be
summarized at various points using a prefix address.
 The choice of routing protocol must support the VLSM
and summarization strategy.
 A good network naming scheme makes the network
easier to manage and easier to navigate.
 IPv6 addresses are written as a series of eight 16-bit
hexadecimal digits separated by colons.
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
18
ITE 1 Chapter 6
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Public
19