DVD MINI COMBO
USER MANUAL
-1-
IMPORTANT SAFETY INSTRUCTION

Please read carefully before use. Please reserve for future reference.

Please do not use the unit near water
Caution: Please do not open the unit to avoid fire hazard or
electric shock. The corresponding repairs should be done
by professional person,
This mark warns the user that there is High Voltage, Please
prevent from electric shock.
This mark warns the user that there are some important
instructions for Operation and Maintaining attached to the
unit.
1. This unit is a CLASS 1 Laser product and employs a
laser inside the cabinet.
2. To prevent the laser from being exposed, do not
remove the cover. Refer servicing to qualified person.

Protection of Power Cord
1.
Hold the plug steady when you plug the power cord.
2.
Do not put the AC power cord near any heat source.
3.
Do not place any heavy objects on the AC power cord.
4.
This unit is CLASS 1 laser product.
5.
This product contains a low power laser device. In order to keep safety, please do not
open the unit to expose the inside parts. Only use authorized personal for repair.
Placement and maintenance
1. Do not cover the unit, always keep the unit with proper ventilation.
2. Do not use the unit near a heat source.
3. Please put the unit on the horizontal surface. Please do not put any heavy object on the unit.
4. When the unit pauses, please set it to the standby state. If you do not want to use the unit for
2
a long time, please disconnect the power cord from the AC power socket, and take out the
battery.
5. Do not put your fingers or other objects into the unit.
6. Under the following circumstances, there will be condensed dew on the Lens:
1). When the heat source equipment was just activated.
2). In a very damp room or a room with vapor.
3). When the unit is just moved from a colder place to a hotter place.
7. Pull the plug out of the socket before cleaning the unit. Use a piece of wet cloth for cleaning.
Do not use detergents or sprays.
8.
Use only authorized repair shop for all repairs
TABLES OF CONTENT
Important Safety Instruction …………………….………...........................................2
Placement and Maintain for the unit…………………………………………......…….3
Tables of Contents………………..………………....................................................4
Main Characteristics…………………………………………….................................5
Packing Content……………………………………..……..........................................5
Operation and Maintenance of DVD Discs…………………………………………..6
Operation interface …………………………………………….………………......... 7-8
Remote Control………………………………………………...................................9-14
Basic operation………………………………………………….…………..............14-16
Function operation……………………………………………………….……...…..17-22
USB/MP3/JPEG playing………………………………………………....................22-23
System Settings………………………………………………………………………24-30
CD Ripping function…………………………………………………………………..30-31
Technical specifications…………………………………………………………..……..32
Useful Tips…………………………………………………………………………………33
Troubleshooting…….…………………………………………………………................34
3
Main Characteristics

Compatible with DVD, SVCD, VCD, CD,DTS CD-R/RW, Kodak Picture CD, MP3,
MP4，DIVX and other multi-media format discs etc.

USB2.0 Slot. The unit can read information from USB drive.

1pc microphone jack and 1pc earphone jack.

AUX input.

Digital AM/FM function.

IPOD Docking Station.

CD ripping function. copy MP3, MP4 and JPEG file from CD disc to USB driver.

Support Multi-Language and Multi-Subtitle.

DVD disc, supports multi-angle, stage near view, side and full view.

Video Output

PAL, NTSC and AUTO TV system.

Parental Lock function.

Support multi-language; prompt for operation.

Full Function Remote Control.
Packing Content
Remote Control
1pc
AV Cable
1pc
User Manual
1pc
Warranty Card
1pc
4
Antenna
1pc
Pink panel for speaker
1set
White panel for speaker
1set
Operation and Maintenance of DVD Discs
◇ Take out the disc by holding the brim of the discs as below, please try to not touch the
shinning side of the disc (Data Storage Side)
◇Don’t attach any labels on the side of the disc. Do not scratch the surface of the disc.
◇When the disc is being played, the rotate speed will be very high. Please do not use any
damaged, scratched, cracked or bent discs to avoid causing unit damaged.
◇Fingerprints or Dirt on a disc will impair the reflective light of the disc and will affect the
signal’s quality directly. The poorer the signal’s quality is, the poorer the playing effect is.
Please use the soft cloth to wipe the disc from the disc center towards the outside direction.
If the disc is very dirty, please use a wet soft cloth to wipe it firstly, and then use the dry soft
cloth to wipe it again. Please do not use detergents, benzene, thinner, antistatic liquid or other
solvents. Otherwise it will damage the surface of the disc.
◇Put the discs into the original boxes where they are so as not to bend them. Do not put the
discs at the place of high temperature, high humidity or direct sunshine, because the bad
environment will also make the discs damaged.
5
OPERATION INTERFACE
FRONT PANEL
1. POWER:
Press this key to turn on or turn off the power for the unit.
2. OPEN/CLOSE: Press this key to open or close the disc tray.
3. NEXT: Press this key to choose next song or file.
4. PREV: Press this key to choose last song or file.
5. DVD/AUX/RADIO: Use this key to switch among DVD/AUX/USB status.
6. FM/AM/USB: Use this key to switch among FM/AM/USB
7. VOLUME+/-:
Rotate this button, “Volume+” will increase the volume, “Volume-“will decrease the volume.
8. STOP: Use this key to stop DVD playback
9. PLAY/PAUSE:
Use this key to start or pause DVD playback. When you press this button during playback, the
unit enters Pause mode.
10. MICROPHONE JACK:
Connect a microphone mini plug here.
11. EARPHONE JACK:
6
Connect a headphone mini plug here.
9.
USB: Connect a USB Driver here.
REAR PANEL
1. Cb/Pb;
2. Cr/Pr;
5. Y：
These jacks output component video and can be connected to the component video input on a
TV or projector.
3. Video：
This RCA connector can be used to connect a TV or projector with a composite video input.
4. (FM/AM) Radio Antenna：
The FM jack is for connecting an FM antenna. The AM push terminals are for connecting an AM
antenna.
6. Left sound channel input;
7. Right sound channel input：
These terminals are for connecting audio output of external devices such as TV or DVD etc.
8. L/R AUX IN：
These jacks are used for connecting with auxiliary audio equipments.
9. Coaxial: This jack is for coaxial audio connection
10. S-Video：
This connector can be used to connect a TV or projector with an S Video input.
11. Optical：
This optical digital terminal can be used for connecting any game machine or satellite tuner
equipped with digital output terminals.
7
12. L/R Speaker output：These terminals are for connecting speakers.
REMOTE CONTROL
◇Method for installing the batteries of the remote control
1.
Turn to the back side of the remote control and remove the small cover;
2.
Install two AAA batteries properly;
3.
Fit on the small cover.
Note：
1.
Do not mix use the battery with different brand and type for the remote control. Do not use
the new and old batteries together.
2.
When the remote control’s function is not strong or the control range becomes smaller,
please change both AAA batteries.
3.
If the unit will not be used for a long time, take out the batteries from the remote.
4.
Do not disassemble the remote control.
REMOTE CONTROL DIAGRAM
8
1．POWER
2．GO TO
3．LANGUAGE
4．ANGLE
5．SUBTITLE/ RIPP
6．PROG
7．SETUP
8．OSD
9． N/P
10．REV
11．STOP
12．FWD
13．AUDIO
14．BASS/TREBLE
15．A-B
16．REPEAT
17．FM/AM
18．MIC
19．OPEN/ CLOSE
20．NUMBER SELECTION KEY
21．DVD/ USB
22．VIDEO
23．PBC
31．MUTE
24．3D
25．ENTER
26．DVD/AUX/RADIO
27．PLAY/ PAUSE
28．PREV
29．NEXT
30．VOL+ / -
33．SEARCH
32．ZOOM
34．RETURN
FUNCTION INSTRUCTION FOR REMOTE CONTROL
9
1．POWER:
Press this key to turn on or turn off the power of the unit.
2．GOTO:
Press this key to select time
3．LANGUAGE:
Select the language wanted when playing DVD discs that have more than two languages.
4．ANGLE:
This key is used for the discs with angle specially. Press this key, you can select the proper
viewing angle.
5．SUBTITLE/ RIPP:
When playing the DVD or SVCD disc with multi-subtitle, press this key to choose the required
subtitle.
Pressing this key while a CD or is played and the USB drive is inserted will copy the file from the
disc to the USB. (Support the file format: MP3/MP4/JPEG/WMA)
6．PROG:
During CD playback, press stop, and then press PROG will show the following menu on TV:
Input the numbers of the program No.1-16, select the “PLAY” option by using the direction keys,
press ENTER key to play the tracks in new programmed sequence. Selecting “CLEAR” option
and pressing ENTER key will clear all of the numbers you have inputted.
While playing MP3, press STOP and then press PROG key, the menu will show as below on TV:
Input the title numbers and chapter numbers in the desired order, and then select “PLAY” option,
select ENTER key to confirm, it will play the songs selected only.
If you select “CLEAR” option, and then press ENTER key. It will clear all of the numbers you
have inputted.
10
7．SETUP:
Press this key to enter into SETUP menu.
8．OSD:
Press this key to enter into the OSD menu.
9． N/P:
Press this key to choose the TV system, such as PAL, NTSC and AUTO.
10．REV:
Press this key to enter into the fast backward status, press it repeatedly, it will show：
2X: The program will be played at 2 times the normal speed.
4X: The program will be played at 4 times the normal speed.
8X: The program will be played at 8 times the normal speed.
16X: The program will be played at 16 times the normal speed.
32X: The program will be played at 32 times the normal speed.
11．STOP:
Press this key to stop the playback.
12．FWD:
Press this key to enter into the fast forward status, press it repeatedly, it will show：
2X: The program will be played at 2 times the normal speed.
4X: The program will be played at 4 times the normal speed.
8X: The program will be played at 8 times the normal speed.
16X: The program will be played at 16 times the normal speed.
32X: The program will be played at 32 times the normal speed.
13．AUDIO:
When playing SVCD/VCD/CD/MP3 disc, you can press this key to select the Sound Channel.
For CD and MP3 disc, press this key continuously, you can switch among “Stereo”, “MONO L”
or “MONO R”.
14．BASS/TREBLE:
Press this key and Vol+/- key, you can adjust the BASS/Treble .
15．A-B:
Press this key first to set location A: REPEAT A-, press it again to set location B, and then it will
play the section A-B repeatedly. Press A-B the third time, it will cancel the repeat and return to
the morel playback.
16．REPEAT:
Press this key to play the chosen Subject/Chapter (DVD disc) or Single song/Full Disc (VCD
Disc) repeatedly.
For DVD Disc, press REPEAT button once, it will show as follows on the TV screen in cycle:
11
REP: [OFF]
REP: [CHAPTER]
REP: [TITLE]
REP: [REP ALL]
For SVCD/VCD/CD Disc, press REPEAT button once, it will show as follows on the TV screen in
cycle:
REP: [OFF]
REP: [REP 1]
REP: [REP ALL]
17．FM/AM:
Use this key to switch between FM/AM.
18．MIC:
Press this key to enter into MIC mode.
19．OPEN/ CLOSE:
Open or Close the disc tray.
20．NUMBER SELECTION KEY:
It includes 0-9 number keys and 10+ key. You can press them to select the file which you want
directly.
21．DVD/ USB:
Press this key to select which device DVD or USB will play. Once selected press ENTER to
confirm you selection.
22．VIDEO:
Press this key to select different video output mode (YUV, P-SCAN or S-Video)
23．PBC:
When playing the disc with PBC function, When PBC is ON, the PBC menu frame will show on
the TV screen. (There may be some difference because of disc’s difference). Press the PREV or
NEXT key to turn pages until you select the desired menu. , Press the number keys to select.
When the PBC is OFF, you can not use the menu frame to select the file. And the disc will be
played orderly. You can select the file by pressing PREV or LAST keys. Or you can press the
number keys to select the file directly.
24．3D:
Press this key to enter into 3D mode.
25．ENTER:
Press this key to confirm the chosen option.
26．DVD/AUX/RADIO:
Press this key to switch among DVD/AUX/RADIO status.
27．PLAY/ PAUSE:
Press this key to make the music play or pause.
28．PREV:
Press this key to select the last file or channel.
29．Next:
12
Press this key to select the next file or channel.
30．VOL+ / -:
Press this key to increase or decrease the volume.
31．MUTE:
Press it will make sound off; press it again will make sound on.
32．ZOOM:
Under the playing state, press this key continuously, it can realize to zoom in or out the image
size x2; x3; x4; x1/2; x1/3 and 1/4 etc.
33．SEARCH:
Under the AM/FM mode, press this key, it will search the AM/FM Channel automatically.
34．RETURN:
When playing some section of DVD disc, press this key, it will return to the main menu. When
playing VCD disc, press this key, it will return to the Start Playing State.
BASIC OPERATION
I. POWER ON
Press the "power" key to open the local power supply, TV screen displays "Reading disc". If
there is no disc in the machine, it displays "no disc".
II. PLACE DISC
Click "Close /Open" key to open bin gate, the machine displays "Open" on the TV screen; Place
the disc into the machine, and click the "Close /Open" key to close the bin gate, the machine
displays "Close " on the TV screen, the machine read the disc information, after read completely,
it will enter into the automatic playing status
(Note: When playing some discs, after reading out the disc type, it will be needed to click play
or select
key , and then the machine will start playing).
III. PLAYING
1. Menu playing
According to the content in the discs data area, the machine display menu supply play/pause
key for uses to select to shift the status between playing and pausing.
13
1. Menu playing [Suitable for DVD, SVCD, VCD2.0 discs]
1). Click "PBC /Title" key
1.1 If for DVD discs, it will display the title of DVD discs on the TV screen;
1.2 If for SVCD, VCD2.0 Discs, it will display the SVCD, VCD2.0 disc's menu screen (PBC
enable) on the TV;
Note: Right now, after pressing this key, it displays the current PBC status. When playing
SVCD, VCD2.0 discs, the machine initial PBC status is disabling.
For DVD discs, click this key to return to the title playing.
2). Press Confirm or Play / Pause key can start playing from the cursor location.
3). Return menu during playing process: if as the DVD disc, please press the "Menu" button,
to return to the menu screen; if as super VCD, VCD2.0 disc, menu playing:
[Enable], press RETURN key, to return to the menu screen.
4). Stop playing
4.1. At the first time press the "Stop" key, the machine enters into the quasi-stop playing, it will
display
on the OSD, press stop key again, the machine enter into stop status.
4.2. When the machine enters into the quasi-stop playing status, press the "Play / Pause" key
can continue playing from the quasi-stop point;
4.3. When the machine enters stop playing status, press the "Play" key to play orderly.

In order to protect the disc, if you want to remove the disc, please firstly press the "Stop"
key and then press "Close/Open" key to open bin gate, remove the disc, and then close
the bin gate.

If long-term non-use, please unplug the power cable.
2. Title playing (DVD disc)
1). Press "Title" key, the title content will appear in the television screen.
2). Press the direction keys to move the cursor, select your required playing title, or select the
title directly by number keys.
3). The machine will play from the first chapter of the selected title.
3. Sequence playing
1). If for SVCD, VCD discs, in the "PBC on" status, then press the "PBC" key, shift to "PBC
off" status can play orderly, and then press the "PBC" key, you can shift back to "PBC on" status.
2). In addition to SVCD, VCD discs, in the stop status, directly press the "Play / Pause" key,
you can realize ordinal playing feature, which is valid for the all suited playing disc.
4. Program playing
14
Under stopping state, using program playing function, you can designate any 16 songs in the
disc to ordinal play orderly.

The interface display as:
DVD discs:
Super VCD, VCD, CD, CD-G, HD-CD discs:

According to the cursor tips to input number, and press "Play" key to program playing; or
move the cursor to the "Play" expression point, and then press the "Confirm" key, players
can also program to realize.

At most program up to 16 titles, chapters or tracks.

According to the direction icon indication in the menu, press the direction keys to move the
cursor to the desired input number place.

Press "Play" key after the program playback, and press "prog" key can show the sequence
and content of program playing, and cancel program playing; may also press stop, and then
press play key to play in order.
Notice:

If you want to clear all programmed numbers, you can move the cursor to the "clear" for
"confirmed."

If you want to modify the playing sequence, you can press the direction keys to move the
cursor to the required modified project to input the requested numbers directly.
FUNCTION OPERATION
1. Select song directly
1) For DVD discs, in the menu page and the title page, you can select the song directly; when
playing, you can select the title directly.
2) For SVCD/VCD discs, in ordinal playing status, you can select directly (during programming
15
and in the “PBC on” status, you can not select the song directly, please press “Previous song/
Next song” to select).
3) For CD, HD-CD disc, the disc can be carried out directly in accordance with the number keys
to select the song.
4). For WMA, MP3/JPEG discs, the disc can select all of the included songs under the current
directory by the number keys directly.
NOTE: To designate1-9 songs, press the corresponding number keys (1,9) directly; to designate
10 or more than 10 songs, use 10 + keys, such as: 10, press 10 + and 0 keys.
If the input song does not exist, the key is invalid.
2. Previous / Next song
1) Press “Next song” key, jump backward one title / chapter / track for playing;
2) Press “Previous song” key, jump forward one title / chapter / track for playing;
2.1 If for SVCD, VCD discs and in the "PBC off" status, if the current playing song is the last
song and press the "Next song" will in the stop status; if the current playing song is the first song,
press the "Previous song" will in the stop status; if the current status is stop, it would be invalid.
2.2 If for the DVD disc, the disc will appear different performance in accordance with its structure.
3. Fast Forward, Fast Backward
When playing, you can use fast forward and fast backward functions.
1) This machine provides five fast forward speeds. Press fast forward key can select the
different fast forward speed, according to press times, circle as the following ways:
1.1 If for DVD discs, if fast forward to the next title / chapter / the beginning, play from the
beginning location; if for SVCD, VCD discs, in the “PBC on” status, if fast forward to the initial
position of next song, play from the beginning location.
1.2 During fast-forward, press the “Play / Pause” key to resume normal speed.
1.3 During playing CD, HD-CD, MP3, WMA fast-forward speed*2, there is voice output;
2) This machine provides five fast backward speeds. Press the “Fast backward” key can select
the fast backward speed, according to press times, circle as the following ways:
2.1 If for DVD discs, if fast backward to the next title / chapter / the beginning, play from the
beginning location; if for SVCD, VCD discs, in the ”PBC on” status, if fast backward to the initial
position of next song, play from the beginning location.
2.2 During fast-backward, press the “Play ” key to resume normal speed.
2.3 During playing CD, HD-CD, MP3, WMA fast-forward speed * 2, there is voice output;
16
4. Slow playing
While playing dynamic images, you can use slow playing function.
The machine provides four slow playing speeds, press the "Slow playing" key to play slowly, can
select the slow playing speed, according to press times, and circle as the following ways:
5. Single-step
When playing VCD, SVCD, DVD, HD-CD, WMA, MP3/JPEGD discs, press the "single step" key,
and then the image suspended. Under this status, press each key once to go forward a frame;
press the "Play / Pause" key to resume normal playing status.
6. Repeat
At first time press it to display the current repeat playing mode.
1) For SVCD, VCD discs, in ordinal playing status, it can play; the machine provides two repeat
modes, press the “Repeat” key on the model to be selected, according to press times, and circle
as the following ways:
2) For DVD discs, it can set repeat playing mode.
The machine provides three repeat modes, press repeat key on the model to be selected.
According to press times, and circle as the following ways:
3) For CD, HD-CD, WMA, MP3/JPEG discs, in the playing status, it can repeat playing. It
provides three repeat modes, press the “Repeat” key on the model to be selected, according to
press times, and circle as the following ways:
“Single song playing --- Single song repeat --- Directory repeat---- Directory playing”
7. Screen display
This machine provides the status display, press "Display" key can display the current playing title,
chapter, time and other auxiliary information on the screen by pull-down menu.
1) If it is DVD disc (divided into five pages menu)
1.1 Press the " Screen display " key to display the first page "playing time, title*/* (current
playing title / total title) chapters */ *(current playing chapter / total sections), **: **: ** ";
1.2 Press the " Screen display " key to display the second page "the title remaining time, title */*
(current playing title / total title) chapters */* (current playing chapter / total sections), **: **: ** ";
1.3 Press the " Screen display " key to display the third page "chapter time, title */* (current
17
playing title / total title) chapters */* (current playing chapter / total sections), **: **: ** ";
1.4 Press the " Screen display " key to display the 4th page "the chapter remaining time, title */*
(current playing title / total title) chapters */* (current playing chapter / total sections), **: **: ** ";
1.5 Press the " Screen display " key to display the 5th page as "Display off".
2) if for SVCD, VCD discs,
2.1 Press the "Screen display" key at the first time, display: song time, song / (current playing
song / total songs)
2.2 Press the "Screen display" key at the second time, display: single song remaining time, song
/ (current playing song / total songs)
2.3 t Press the "Screen display" key at the third time, display: full-disc time, song / (current
playing song / total songs)
2.4 Press the "Screen display" key at the 4th time, display: full-disc remaining time, song /
(current playing song / total songs)
2.5 Press the "Screen display" key at the 5th time, display: display off.
3) If for CD, HD-CD, WMA, MP3/JPEG discs
3.1 By pressing the "Screen display" key, display: the first page "playing time, the total song
playing time, song */* (current playing song / total songs), playing status;
3.2 By pressing the "Screen display" key, display: the first page "playing time, the song total
playing time, playing status, song / (current playing song / total songs), the size of the playing
volume.
8. Language Freedom [Suitable for DVD]
At the first time, press it to display the current used channel mode.
1) Press the key to realize sound channel conversion function (need disc support);
2) Press it once the “Language” key can switch a sound channel, it display on the television
screen as: left single voice---- right single voice----- mixed voice ---- stereo sound.
9. Confirm Key
After setting the menu, you need to press this key to take the setting effect.
10. Subtitle [suitable for discs with support of this function]
1) After the first time pressing it, it displays the current used subtitles language mode;
2) For the record multi language subtitles DVD or Super VCD discs, when playing you can select
the required language subtitles in accordance with this key;
3) Every time press the subtitle key to switch the voice language, TV screen displays the
selected subtitle language code, such as: subtitle icon: [1 English] or [Close] (languages
depending on the type of disc, this machine supports eight kinds of subtitle language,
18
respectively for: English, Chinese, Japanese, French, Spanish, Korean, Russian, Thai)
11. Angle [suitable for DVD with supports for this function]
1) After the first time pressing it, then it displays the current playing angle;
2) For the record multi lens angle DVD discs, when playing you can select the required lens
angle in accordance with this key;
3) Every time press the angle key to switch the angle scene, TV screen displays the selected
lens angle code, such as: angle icon: [] (namely the current angle / optional angle total number)
or [No] (there is or not optional angle and total number to this disc, if the disc without the optional
angle information, the TV screen displays “You have pressed the wrong key”)
12. Mute
1) After pressing the remote control’s mute key, the audio output turn off, the TV screen displays
“Mute” and then press this key to select the “Volume +”, “volume -” can cancel mute status,
enable the audio output.
2) When mute, there is no sound output in the microphone;
3) If there is no sound, please try to press the mute key.
12. Zoom In
1) Press the remote control’s zoom in key can enlarge the images, the machine provides three
zoom mode, press the "Zoom in" key can be followed by the cycle options:
2) When playing the disc menu, this key is invalid;
3) When
, you can use the direction key to move the scene, according to
requirement, you can enjoy the various parts of the enlarge scene.
14. Section repeat
1) When normal playing or fast-forward, fast backward, at the beginning point which you want to
repeat playing (A point) to press "Section repeat" key, TV screen displays: A
2) When normal playing or fast-forward, fast backward, at the ending point which you want to
repeat playing (B point) to press "Section repeat" key, TV screen displays: Ab
3) Press the "Section repeat" key at the three times, the TV screen displays: None.
Note: For VCD, CD discs, it can only designate section in the song, if change song, the "Section
repeat" function will be cancelled automatically;
For DVD discs, it can only designate section in the title / chapter.
19
15. Volume control
Increase the volume: press the "Volume +" key; reduce the volume: press the "Volume -" key.
16. Select time
Pressing select time key, the machine screen displays as follows:
1, 1) Move the cursor the corresponding content item, and then press confirm key to enter the
option with the number keys can select song in the current interface, select the all disc playing
beginning time, and the songs playing time.
2) Enter the repeat playing option to select song repeat, all repeat
2, Press "Down" key to enter the next page time display item.
17. BASS / TREBLE
Use BASS / TRE key on the remote control to adjust the Treble/Bass .
18. AUX
Connect your auxiliary device to the Aux connector. Switch to Aux with your remote
control or with the FUNCTION key.
19. IPOD Docking Station
Switch to the AUX state by pressing the “DVD/AUX/RADIO” key on the remote control or on the
front panel of the unit. Position the iPod player onto the IPOD Docking station, and setup the
IPOD player to the PLAY state. Adjust the volume to the desired level.
USB/MP3/JPEG PLAYING
Loading the MP3/JPEG disc, the DVD will search all stored MP3/JPEG directory automatically,
after finishing searching, it will be given preferential access to the MP3's first directory (for mixed
files disc, if it is single document type disc, then enter into the first directory) automatically and
play the first song in the directory (the cursor stops at the "01" position). On the screen, it
displays as follows:
Through the direction key to move, and enter the directory area to select the required directory
to play, at the same time play the first song in the directory; through the direction key to move,
you can enter the file area to select the required file to play.
20
1.
Current playing time
2.
Total playing time
3.
Volume size
4.
Playing status
5.
Current playing song / Current total songs
6.
Express the current playing JPEG image files
7.
Express the current playing MP3 image files
Note:
1) Press move left, move right direction key can shift the cursor among the directory area,
file area and function switch area;
2) The cursor in the directory area and the file area as the above diagram, in the function
switch area , it is orange rectangular box;
3) The cursor in function switch area can move by left move, right move direction key,
and select key to confirm it;
4) For WMA, MP3, JPEG mixed discs, when playing JPEG files, press the left move key,
the screen will return to JPEG menu directory;
5) Press the number keys to directly select the directory files, for example: play the 15 th
song in the current directory, firstly press the "10 +" key once, and then press "5" key,
and start playing from 15th song ( there is no image in MP3 discs, only digital audio
music output)
6) During playing JPEG image CD-ROM, in accordance with programming key to select
picture switch display effect, there are 16 kinds of switch display effect; According to
press times, and circle as the following ways:
Display the picture from top to bottom --- Display the picture from bottom to top -Display picture from left to right ----- ----- Display the picture from right to left -----From left upper
to lower right – From right upper to lower left --- From lower left to lower right ----- From lower
right to left upper-----From middle to top/bottom unfold---- From top/bottom to middle shut ---Random playing (display)--without switching effect.
21
7).When playing picture or pausing, you can through up/down/left/right key to switch
picture display angle.
▲ (Move up key): upper and lower turnover
▼ (Move down key) the level turnover
(Move left key) Rotate left 90 degrees
(Move right key) Rotate right 90 degrees
SYSTEM SETTINGS
Press "SETUP” key on the remote control, and then you can begin the initial setting. Select
related SETUP page with directional buttons. The selected item will be highlighted.
MENU FIELD:
It includes the following settings.
System settings
Video settings
Language settings
Speaker settings
Audio settings
Dolby digital high settings
VARIOUS SETTINGS ILLUSTRATION
I. SYSTEM SETUP
Press SETUP and select SYSTEM SETUP page.
TV SYSTEM:
You can choose the TV system as you like by press UP/DOWN keys. There are several TV
systems for your choice: NTSC, PAL and AUTO.
22
SCREEN SAVER:
You can choose Screen Saver ON/OFF by press UP/DOWN keys and Right key.
ON: When enabled, if the unit is idle (e.g. in stop/pause state and are waiting for the user to
input disc for about 60 seconds), it will appear a screen saver to protect the screen.
OFF: Cancel the screensaver.
VIDEO:
Video component: When the player use Y, Cb, Cr video Cable to connect TV, can select this
item;
S-VIDEO: When the player with S-Video or composite video output to connect TV, can select
this item;
P-SCAN YPBPR: when the player use Y, Pb, Pr TV video line to connect TV, switch TV to
progressive scan, can select this item;
Note: When using this machine complex video output, the two items can be arbitrary choice; TV
has progressive scanning function, it can select P-SCAN or INTERLACE-YUV
23
TV TYPE:
16:9 (Wide-screen): When the local machine connects with wide-screen TV, can select this item;
4:3 LB (Mail): For the average-size TV, please select this item. When playing the wide-screen
image, the black slide jamb can appear on the top and bottom of the TV.
4:3 PS (Panorama scan): Suitable for the general size TV, when playing the wide-screen images,
the left and right edge of the image will be removed and show the entire screen image.
Note: Disc recording and playback screen ratio, and some discs may not be in accordance with
the screen size which you choose to play; For the disc which only record 4:3 mode, no matter
what the screen image ratio is set to which kind, but the proportion ratio is only 4:3; the screen
image ratio choice, should be in confirm with the actual TV screen ratio.
PASSWORD:
The initial setting as "Password lock" state, at this time can not set the "level", you need to press
the number keys to input this machine initial password: 0000, and then press the select key to
recognize; if you want to modify the password, need to enter the old password, then enter the
new password (valid password as four-bit number).
RATING:
When playing the disc with lock function, it can be divided in accordance with the level of the
disc and your actual requirement, select the appropriate age-control level. Age control level is
divided into eight kinds, as the following icons:
24
Note: Only in the password unlock state, using the direction keys to select the level; and only in
password lock state, the level restriction is effect.
DEFAULT:
Select this item can restore the DVD initial settings.
II. LANGUAGE SETUP
OSD Language
Enter into the OSD language, press the direction keys to select your desired " OSD language",
and then press the "enter" button to confirm.
AUDIO LANG:
25
Enter into the audio language settings, press the direction keys to select your desired "Audio
Language" item, and then press "ENTER" key to confirm; in this option this machine supports
eight models, the selected items including: Chinese, English. French, Spanish, Portuguese,
Japanese, German.
SUBTITLE LANG:
Enter into the subtitle language settings, press the direction keys to select your desired "Subtitle
Language" item, and then press "ENTER" key to confirm; in this option this machine supports
eight models, the selected items including: Chinese, English. French, Spanish, Portuguese,
Japanese, German and so on.
MENU LANG:
To enter the menu language setting, press the direction keys to select your desired "Menu
Language" item. And then press "confirm" key to confirm; the machine supports eight model, the
selected items including: Chinese, English, French, Spanish, Portuguese, Japanese, German
and Latin. "
26
III. VIDEO SETUP
1) BRIGHTNESS
Press the direction keys (
) to move slide block, can set video output brightness.
2) CONTRAST
Press the direction keys (
) to move slide block, can set video output contrast.
3) SATURATION
Press the direction keys (
) to move slide block, can set video output Saturation.
IV. AUDIO SETUP
SPDIF off: coaxial or fiber output ports no signal output.
27
SPDIF source: When the DVD connects with the power amplifier through the coaxial or fiber
interface, please select this option; when playing using Dolby Digital, DTS, MPEG recording
systems, the machine coaxial or fiber output port to the corresponding digital (source format)
signal; at this time the connected power amplifier must have the Dolby Digital, DTS, MPEG
decoding functions.
SPDIF / PCM: When the DVD connects with the two-channel digital stereo amplifier, please
select this option: When playing discs with Dolby Digital, and recorded by MPEG recording
systems, coaxial or fiber output ports will be modulated into two-channel PCM form to output.
V. DIGITAL SETUP
OP MODE:
Line out: The input signals are linear compressed and the volume is lower. It is better to choose
it at night.
RF REMOD: The volume is higher and adapt to daytime use.
DYNAMIC RANGE:
When select compress mode as “Line output”, select this item to adjust contrast to get different
signal compress effect.
Select “FULL” item to minimum the audio signal peak value;
Select “OFF” item to maximum.
28
DUAL MONO:
The item for setting output ways of the audio output L, R line signal; which includes four modes:
STEREO, MONO L, MONO R and MIX MONO.
CD RIPPING FUNCTION
When playing CD, insert sufficient capacity MP3, and then press “SUBTITLE/ RIPP” key on the
remote control, and then enter into (RIP CD-UNKNUWN ALBUM) download interface. At this
time move the cursor to
, operate as following steps:
1. Press the right direction key (
) to move the cursor to
and press the
"ENTER" key, select multiples of 1X or 2X. And then press the right direction key, move the
cursor to
, and then press ENTER key to confirm, select (128KBPSA or 160
KBPSA or 192KBPSA or 320 KBPS) download speed (flow);
And then press DOWN direction key, move the cursor to
,
press "ENTER" key to select whether or not to create ID3 format, "
convert, "
" express conversion, (recovery status as
" express no need to
), but generally do not need to be
selected, keep the recovery status, and then press the left direction key, move the cursor to
.
2. Press the down direction key, the cursor move to
, and then press right
direction key, then press the "ENTER" key, at this time all the documents have not been
selected, the user can use up and down direction keys move the cursor to the desired download
song and then press the "Confirm" key to confirm. if press the third song and then press "
29
ENTER ", select the left after selection, press left direction key, the cursor back to
and then press " ENTER" key to download. Until the machine download is
complete, appear red OK signs, at this time it prompts: please press the " ENTER" key to
confirm. Move the cursor back to
The third step: Press down direction key, move the cursor to
; and then press the "
ENTER" key to start up the machine back to the starting screen for normal playback, at this time
press the stop key to shutdown, and then after removing the MP3 player, make the other playing.
The fourth step: After downloading the MP3, the programs playing mode is still the music playing
mode.
NOTE:
1. Do not insert USB when playing, if need to add the disc, the player should in the stop status, if
need to insert MP3 (MP3 should in the enable position), otherwise affect the playing or the
impact close/open bin.
2. After connecting MP3, firstly press the play key, and then press the "Subtitles" key to make
download settings.
3. During record downloading, it is essential to ensure that the playing song is normal, if the disc
is bad that may cause bad download or bad death.
4. When the disoperation cause machine system is out of control (such as can not operate or
image bad). Please shutdown (5 seconds) for resetting the normal system using. Remark： It
can only copy the file one by one
TECHNICAL SPECIFICATIONS
Product type
DVD laser player
System
PAL/NTSC/AUTO
Compatible disc type
DVD 、 SVCD 、 VCD 、 DVCD 、 CD 、 MP3 、
CD-R、DVD-R/RW、OKO
Video output level
1.0Vp-p0.2Vp-p(75)
The level of clarity /AV output
≥450 lines （TV lines）
Audio output level
1.0-2.2V
Audio signal to noise ratio
≥80dB（A weighted）
Digital audio output
coaxial , fiber
30
Power voltage
～100-240V、50-60HZ
Maximum power consumption
80W
The instructions are only for reference, the company will reserve the right to
modify specifications without any prior notification.
LAST MEMORY FUNCTION:
The last memory function means when the unit is playing disc, turn the unit off to take a break,
and then turn it on, it will continue the playing from where you left off!
The default setting of last memory function for this unit is “ON”. If you wanted to change it into
“OFF” status, please do as follows:
1. Make the unit POWER ON, and then connect the unit with TV, and make the machine
under the stop status.
2: Press ”SETUP” key on the remote control firstly, it will appear the setting interface, and
then please press the Right direction key to choose the ”General Setup Page”  ”Last Memory
Playing”  ”OFF”, and then press the ”ENTER” key to confirm, it will exit from the last memory
function.
USEFUL TIPS
● In order to extend the local machine life, the switch time between machines turn
on and off must be more than 30 seconds.
● Turn off the power after using.
● The use of power should correspond with the mark voltage values, otherwise it
will not play.
● For some of the discs, using some of the features of this machine, it can not be
achieved.
● If appear contingent dead halt, please restart the machine.
● This machine can not play part CVD format super VCD discs.
31
TROUBLESHOOTING
Before contact with the repair person, you should check the problem reason follow
the instructions.
Phenomenon Reasons
Countermeasures
1.Audio line is not properly connected
No sound
2.Please clean and handle disc
2.Disc deformed or dirty
3.Please press mute button again to
3.The machine n a mute status
No image
1.Please correctly connect the audio line
cancel mute
1.Signal is not properly connected
1.Reliable connect signal
2.TV is not adjust to the correct location
2.Adjust the AV/TV status
1.Disc was bad produced ,deformation
1.Clean the disc and deal with the disc
or dirty
2.Put in disc again, label upwards
No read disc
2.Disc is not properly placed
3.Open the power switch, remove disc,
3.Optical header dew
and then hold about 1 hour
32
1. Remote control is not point at the
Remote
control failure
receiving window
1.Use the remote control properly
2. The remote control distance is too
2.The same time to replace battery
long.
3.Remote control battery voltage less
1. Disk itself suppressed badness
Instant
function failure
automatically
return to normal
2. Mis-operation other key
3. External leakage electrostatic of the
2.Operate once again
3.Turn off 1-2 minutes，turn on again
machine
Image scroll
1.Wait 5-10 seconds will
1.TV format settings are not suitable for
disc
33
1.Adjust TV system