CCNA3 Skills Test
2014FL due by 8pm, Wednesday, October 15th , 2014 (last harmonized cisco final exam
day)
As lead network engineer for your local corporate site, you have been assigned the CIDR
address of 198.7.6.128/25 from the home office CCIE administrator. Your location has
two Ethernet LANs connected with a private metropolitan Ethernet (“GigaMAN” type)
circuit. Use the gray Ethernet crossover cable between two Cisco 1841 routers’
FastEthernet 0/0 interfaces to simulate the MAN circuit. Using VLSM, assign a /30
address space to the MAN link, a /28 address space to the first LAN, and a /26 address
space to the second LAN. Assign ports 1-12 of the first 2960 switch to the first LAN
using VLAN 111 and ports 13-24 of the second switch to the second LAN using VLAN
222. Use any static or classless dynamic routing protocol.
Project deliverables include a subnet chart for each VLSM subnet showing network
address, range of usable host addresses, and broadcast address; a labeled logical
schematic showing all router and switch connections with all networks indicated with
CIDR notation (i.e., 198.7.6.xx/yy), and the square-style chart showing total used and
available subnets from the entire /25 space.
Connect two workstations in the lab topology and test end-to-end connectivity with ping.
Grading rubric:
Subnet charts
Schematic
Address utilization square chart
VLAN creation and port assignments
Properly configured routing protocol
End-to-end connectivity with PING
15%
10%
10%
15%
25%
25%
====
100%
(10% extra credit – add IPv6 addressing and dual-stack routing. Use the
2001:DB8:ACAD prefix.) Work singly or in groups; groups may produce a single set of
deliverables.