1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
Conference Programme
Day 1: 13 November 2013 (Wednesday)
Time
8.30 am - 9.30 am
Programme
Venue
Conference Registration
Foyer 2
Opening Ceremony
Arrival of participant
Arrival of VIP
Speech by Chairman
Speech by Dean of Faculty of Engineering
Conference officiation
Ballroom 1
9.00 am -9.30 am
9.30 am - 9.40 am
9.40 am-9.50 am
9.50 am-10.00 am
10.00 am-10.05 am
10.05 am – 10.25 am
Morning Tea Break
Foyer 1
10.25 am -10.55 am
Plenary Speaker 1
Prof. Dr. Issam Doghri
Université Catholique de Louvain (UCL), Belgium
Topic: Modeling and Simulation in Materials Science and
Engineering
Chair: Assoc. Prof. Dr. Ibrahim Henk Matselaar
Ballroom 1
10.55 am – 11.25 am
Plenary Speaker 2
Prof. Ahmad Fauzi Ismail
Universiti Technology Malaysia (UTM), Malaysia
Topic: Membrane Technology
Chair: Assoc. Prof. Dr. Rafie
Ballroom 1
11.25 am – 11.55 am
Plenary Speaker 3
Prof. Robert Kao
National Taiwan University (NTU), Taiwan
Topic: Electronic Materials
Chairman: Prof. Haseeb
Ballroom 1
11.55 am – 12.25 pm
Plenary Speaker 4
Dr. Nor Azmi Alias
Collaborative Research in Engineering Science and
Technology Center (CREST)
Chairman: Assoc. Prof. Dr. Tan Chou Yong
Ballroom 1
12.25 pm – 1.30 pm
Lunch
Coffee House
Session 1A
Topic : Bio-materials 1
Chair: Dr. Mohammad Abul Fazal
Ballroom 2
Session 2A
Topic : Concrete and Structural Materials 1
Chair: Dr. Noor Asmawati Md Zabidi
Ballroom 3
Session 3A
Topic : Ceramics 1
Chair: Dr. Siti Raihan
Merpati Room
1.30pm – 3.20pm
(Parallel session)
Enggang Room
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 1
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
Session 4A 1
Topic : Material Modeling and Simulations
Chair: Dr. Yang Ming Lu
Session 5A
Topic : Environmentally sustainable Materials and
Processing 1
Chair: Dr. Wong Yew Hoong
Merak Room
3.20pm – 3.40pm
Afternoon Tea Break
Foyer
3.40 pm – 4.10 pm
Poster session 1
Foyer
Session 1B
Topic: Bio-materials 2
Chair: Dr. Addanki Sambasiva Rao
Ballroom 2
Session 2B
Topic : Catalytic Materials 1
Chair: Dr. Teo D.C.L
Ballroom 3
Session 3B
Topic : Ceramics 2
Chair: Assoc. Prof. Dr. Ku Zilati Ku Shaari
Merpati Room
Session 4B
Topic : Environmentally sustainable Materials and
Processing 2
Chair: Dr. Zurhana Mat Husin
Enggang Room
Session 5B
Topic : Nanotechnology 1
Chair: Dr. Nor Ishida Zainal Abidin
Merak Room
4.10pm – 5.20pm
(Parallel session)
7.30pm - 7.45 pm
7.45 pm – 8.00 pm
8.00 pm – 10.00 pm
Dinner
Guest arrival
Speech by Chairman
Dinner and dinner show
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Ballroom 1
Page 2
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
Day 2: 14 November 2013 (Thursday)
Time
9am – 10.30am
Programme
Session 1C
Topic : Polymers 1
Chair: Prof Yoshiharu Kimura
Venue
Ballroom 1
Session 2C
Topic : Metals and Alloys 1
Chair: Dr. Shek Poi Ngian
Ballroom 2
Session 3C
Topic : Composites 1
Chair: Dr. Ching Yern Chee
Merpati Room
Session 4C
Topic : Nanotechnology 2
Chair: Dr. Monon Mahboob
Enggang Room
Session 5C
Topic : Materials for Renewable and Energy
Conversion 1
Chair: Dr. Roslina Ahmad
Merak Room
10.30 am – 10.50 am
Morning Tea Break
Foyer
10.50 am – 11.20 am
Poster session 2
Foyer
Session 1D
Topic : Polymers 2
Chair: Prof. Hideki Yamane
Ballroom 2
Session 2D
Topic: Metals and Alloys 2
Chair: Prof. Dr. rer. nat. Usman Sudjadi
Ballroom 3
Session 3D
Topic: Composites 2
Chair: Assoc. Prof. Dr. Ibrahim Henk Matselaar
Merpati Room
Session 4D
Topic : Nanotechnology 3
Chair: Dr. Marneni Narahari
Enggang Room
Session 5D
Topic: Electronic and Electronic Packaging 1
Chair: Dr. Huseyin Kizil
Merak Room
1.00 pm – 2.00 pm
Lunch
Coffee House
2.00 pm – 3.00 pm
Session 2E
Topic : Material for Energy Storage 1
Chair: Dr. Hendrik Lintang
Ballroom 3
(Parallel session)
11.20 am – 1.00 pm
(Parallel session)
(Parallel session)
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 3
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
3.00 pm - 3.05 pm
3.05 pm – 4.05 pm
(Parallel session)
4.05 pm - 4.25pm
4.25 pm – 5.25 pm
(Parallel session)
Session 3E
Topic: Coating and Surface Engineering 1
Chair: Dr. Rajashekhar Pendyla
Merpati Room
Session 4E
Topic: Polymers 3
Chair: Prof. Dr. Levent Trabzon
Enggang Room
Session 5E
Topic: Metal and alloys 3
Chair: Prof Ikuo Ihara
Merak Room
5 Minutes Break
Foyer
Session 1F
Topic : Polymers 4
Chair: Dr. Andri Andriyana
Ballroom 2
Session 2F
Topic: Metal and Alloys 4
Chair: Dr. Long Bui Duc
Ballroom 3
Session 3F
Topic: Composites 3
Chair: Dr. Mervin Herbert
Merpati Room
Session 4F
Topic: Nanotechnology 4
Chair: Dr. Mohamad Abul Fazal
Enggang Room
Session 5F
Topic : Electronic and Electronic Packaging 2
Chair: Dr. David Mc Phail
Merak Room
Afternoon Tea Break
Foyer
Session 1F (cont.)
Topic : Polymers 4
Chair: Dr. Andri Andriyana
Ballroom 2
Session 2F (cont.)
Topic: Metal and Alloys 4
Chair: Dr. Long Bui Duc
Ballroom 3
Session 3F (cont.)
Topic: Composites 3
Chair: Dr. Mervin Herbert
Merpati Room
Session 4F (cont.)
Topic: Nanotechnology 4
Chair: Dr. Mohamad Abul Fazal
Enggang Room
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 4
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
Session 5F (cont.)
Topic : Electronic and Electronic Packaging 2
Chair: Dr. David Mc Phail
5.25 pm – 5.35 pm
5.35 pm – 5.50 pm
Closing ceremony
Speech by Chairman
Closing
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Merak Room
Ballroom 2 &
Ballroom 3
Page 5
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
List of oral presentations
Biomaterials
Session 1A 1.30pm – 3.20pm
1.30pm
1.45pm
2.00pm
2.15pm
2.30pm
ICoSEM 170 Fabrication of Stainless Steel 316L-HA Composite via Powder Injection
Molding (PIM) - Mohd Ikram Ramli
ICoSEM 192 Synthesis and Properties of Biphasic Calcium Phosphate Prepared by Different
Method - Natasha Nawawi
ICoSEM 254 The Potential of Quercetin in Psidium Guajava L. leaves extract as
Bioinhibitor for Controlled Released Fertilizer - Nur Kamila Ramli
ICoSEM 177 Thermal Treatment and Properties of Bovine Hydroxyapatite - Ali Niakan
ICoSEM 350 Biomechanical Testing of Bovine Skin using Various Sample Specifications
- Nor Fazli Adull Manan
Session 1B 4.10pm – 5.20pm
4.10pm
4.25pm
4.40pm
4.55pm
ICoSEM 420 Removal of Pb(II) By Cs2 Modified Kenaf Powder - Dr. Siti Raihan
ICoSEM 388 The Effects of YSZ-Al₂O₃ Addition on Hydroxyapatite Fabricated by Powder
Metallurgy - Nurul Liyana
ICoSEM 191 Sintering Studies of Synthesized Manganese Oxide Doped Calcium Phosphate
via Wet Chemical Precipitation Method - Norakmal Md Amin
ICoSEM 198 The Effects of Sintering Behavior of Zirconia Doped-Hydroxyapatite for
Clinical Applications - Cheah Gaik Ping
Catalytic Materials
Session 2B 4.10pm – 5.20pm
4.10pm
4.25pm
4.40pm
ICoSEM 416 Characterization of Co-Mn catalysts synthesized via reverse microemulsion
method - A. P. Dr. Noor Asmawati Md Zabidi (Invited Speaker)
ICoSEM 245 Preparation and investigation of photoelectrochemical behaviour of Ce and W
co-doped TiO2 composite film - Rakibul Hassan
ICoSEM 276 The Movement Comparison for Fired Clay and Calcium Silicate Brick Under
Aggressive Environment - Dr. Mohd Haziman Wan Ibrahim
Ceramics
Session 3A 1.30pm – 3.20pm
1.30pm
ICoSEM 393 Phase formation and surface morphology of nickel doped Ba1-xSrxTiO3
ceramics prepared by sol-gel technique - Asa Deepthi (Invited Speaker)
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 6
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
1.50pm
2.05pm
2.20pm
2.35pm
2.50pm
3.05pm
ICoSEM 143 The Effect of Sintering Ramp Rte on the Sinterability of Forsterite Ceramics Teh Yee Ching
ICoSEM 285 Characterization of Rice Husk Activated Carbon for Neutral Protease
Adsorption - Noor Hasyierah Mohd Salleh
ICoSEM 287 Investigation of Ultrasonic Pretreatment on the Synthesis of Zeolite-T and Its
CO2 Adsorption Characteristics - Dr. Ying Fong Yeong
ICoSEM 403 Vapochromic Copper (I) Pyrazolate Complex Materials For Phosphorescent
Chemosensors of Ethanol - Nur Fatiha Ghazali
ICoSEM 215 An Investigation of the Mechanical properties of α-cristobalite - Keith
Azzopardi
ICoSEM 148 On the Geo-Electromagnetic Properties of Clay: Elementary Characterization Dr. Chee Ming Chan
Session 3B 4.10pm – 5.20pm
4.10pm
4.25pm
4.40pm
4.55pm
ICoSEM 372 Effect of Sintering Holding Time on Low Temperature Degradation of YSZ
Ceramic - Sutharshini Ubenthiran
ICoSEM 241 Novel Approach For Co2 Enriched Natural Gas Dehydration Via Adsorption
Using 13x Zeolite As Solid Desiccant - Firas Ayad
ICoSEM 280 Thin Cold-Mix Asphalt Overlay - Dr. Md. Maniruzzaman Abd Aziz
ICoSEM 199 Synthesis of carbon-opacified-silica-aerogel using bamboo leaf - Kow Kien
Woh
Coating and Surface Engineering
Session 3E 2.00 pm – 3.00 pm
2.00pm
2.15pm
2.30pm
ICoSEM 410 Characterization Of Oxide Film By Vanadium Based Anodic Oxidation
Coating - Farah Alina bt Ab Aziz
ICoSEM 439 Investigation Of Surface Characteristics Of Hydroxyapatite/Titanium
Composite Layer Obtained By HF Magnetron Sputtering - Mamayeva Axaule
ICoSEM 206 Preparation And Mechanical Characterization Of Amorphous B-C Films Shahira Liza
Composites
Session 3C 9am – 10.30am
9.00am
9.20am
ICoSEM 162 Microstructure And Hardness Of Friction Stir Welded Aluminum –Copper
Matrix Based Composite Reinforced With 10(Wt-%) Sic - Dr. Mervin
Herbert (Invited Speaker)
ICoSEM 101 Electron Beam Crosslinking Of Eva/Enr-50/Hnts Nanocomposites In The
Presence Of Trimethylol Propane Triacrylate, TMPTA - Amirah Kamal
Rudin
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 7
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
9.35am
9.50am
10.05am
10.20am
ICoSEM 124 Green Magnetic Wave Absorber: The Potential Of Paddy Straw And Recycle
Paper - Mohd Khairul Shahril
ICoSEM 163 Basalt Carbon Hybrid Composite For Wind Turbine Rotor Blades: A Short
Review - Ali Nawaz Mengal
ICoSEM 171 Sintering Properties Of Zirconia–Based Ceramic Composite - Kelvin Chew
ICoSEM 427 Effectiveness Of Fillers In Impact Of Aluminum Tubes - Fauziah Binti Mat
Session 3D 11.20 am – 1.00 pm
11.20am
11.40am
11.55am
12.10pm
12.25pm
12.40pm
ICoSEM 118 Mechanical Properties Of Poly(Lactic Acid)/Multiwalled Carbon Nanotube
Nanocomposites - Mohd Shaiful Zaidi Mat Desa (Invited Speaker)
ICoSEM 172 Uniaxial Compressive Stability Of Laminated Composite Plate With Localized
Interfacial Degeneration - Kam Chee Zhou
ICoSEM 173 Behaviour Of Peat-Added Composite Bricks In Low Cost Building
Construction - Syed Mofachirul Islam
ICoSEM 286 Synthesis And Characterization Of Composite Partially Phosphorylated PvaAluminum Phosphate (PPva-AlPO4) As A Protective Coating - Asmalina
Mohamed Saat
ICoSEM 355 Effect of Maleic Anhydride Grafted Poly(lactic acid) on Properties of
Sawdust/Poly(lactic acid) Composites Toughened with Poly(butylene adipateco-terephthalate) - Jiraporn Nomai
ICoSEM 377 Identification Of Material Properties Of Orthotropic Composite Plate Using
Hybrid Non-Destructive Evaluation Approach - Dr. Ong Zhi Chao
Session 3F 3.05 pm – 4.05 pm, 4.25 pm – 5.25 pm
3.05pm
3.20pm
3.35pm
3.50pm
4.25pm
4.40pm
4.55pm
5.10pm
ICoSEM 190 Water Absorption Properties Of Kenaf Fibre-Pva Composites - Tan Boon
Khoon
ICoSEM 219 Flexural and Tensile Behavior of Kenaf Fiber Composite Materials - Behzad
Abdi
ICoSEM 234 Fabrication And Characterization Of CFRP Rod With Aluminium Foam Core Ummu Raihanah
ICoSEM 242 Design and Fabrication of Compression Test Rig for FRP Composites Norhafiza Muhammad
ICoSEM 329 Preparation And Characterization On Polyvinyl Alcohol/Oil Palm Empty Fruit
Bunch Fiber Composite - Muhammad Hanif Hassan
ICoSEM 357 Effects of Sawdust Content and Alkali Treatment on Mechanical and Flame
Retarding Properties of Sawdust/Recycled High Density Polyethylene
Composites - Rapisa Jarapanyacheep
ICoSEM 363 Biocomposites Reinforced With Cellulose Derived From Oil Palm Empty Fruit
Bunch - Ng Tuck Sean
ICoSEM 384 Phosphorescent Sensing And Imaging Of Temperature Using Mesoporous
Silica/Gold Nanocomposites - Dr. Hendrik Lintang
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 8
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
Concrete and Structural Materials
Session 2A 1.30pm – 3.20pm
1.30pm
1.50pm
2.05pm
2.20pm
2.35pm
2.50pm
3.15pm
ICoSEM 114 Improving The Properties Of Oil Palm Shell (OPS) Concrete Using Polyvinyl
Alcohol (PVA) Coated Aggregates - Dr. Teo D.C.L (Invited Speaker)
ICoSEM 105 Experimental Evaluation Of Damaged Rectangular Rc Beams Repaired With
NSM-CFRP - Abdelkrim Laraba
ICoSEM 353 Effects of Aggregate Size on Concrete Shear Strength - Dr. Lau Teck Leong
ICoSEM 181 Marshall Properties Of Single Face Compacted Asphalt Specimen - Fung
Lum Chang
ICoSEM 332 Effects of Recycled Aggregates on Concrete Strengths - Dr. Wael Elleithy
ICoSEM 251 A Review: Merits Of Warm-Mix Asphalt Technology Using Sasobit And
Aspha-Min Additives - Shahab Moeini Feizabadi
ICoSEM 103 Waste Tyre In Asphalt Pavement Modification - Nuha Salim Mashaan
Electronic and Electonic Packaging
Session 5D 11.20 am – 1.00 pm
11.20am
11.40am
11.55am
12.10pm
12.25pm
ICoSEM 315 The Application Of Secondary Ion Mass Spectrometry (SIMS), Low Energy
Ion Scattering, Focused Ion Beam Sims And Stable Isotope Exchange
Protocols In Materials Science - Dr. David Mc Phail (Invited Speaker)
ICoSEM 212 Deposition Of Amorphous Boron Carbide Films With Pulsed Magnetron
Sputtering And Evaluation Of Their Mechanical Properties - Kei Saito
ICoSEM 260 In-Depth Study And Characterization Of Insulated Cu Wire Ball Bonding Leong Hyung Yang
ICoSEM 333 Fabrication Method of MEMS Based Clamped - Clamped Resonant
Magnetometer - Prof. Dr. Levent Trabzon
ICoSEM 336 Fabrication and Characterization of RF Magnetron Sputtered Silicon Oxide
Films - Hoon Jian Wei
Session 5F 3.05 pm – 4.05 pm, 4.25 pm – 5.25 pm
3.05pm
3.20pm
3.35pm
3.50pm
4.25pm
ICoSEM 341 Surface Plasma Characterization Of Polyimide Films For Flexible Electronics AP Dr. Huseyin Kizil (Invited Speaker)
ICoSEM 159 High Performance Of Electrical Discharge Machining (EDM) Of Inconel 718
Using Copper Tungsten Electrode - Said Ahmad
ICoSEM 210 Value-Addition Of ZnO Used In Glazing Industry For Varistor Application Dr. Niti Yongvanich
ICoSEM 257 Humidity Sensors on Thermally Oxidized Silicon Substrates - Cheng Yang
Low
ICoSEM 304 Interfacial Reaction of Bi-Ag and Bi-Sb solders on Copper Substrate with
Multiple Reflow Number - Mahdi Nahavandi
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 9
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
4.40pm
4.55pm
5.10pm
ICoSEM 338 Fabrication And Characterization Of Aluminum Nitride Films On Silicon
Substrate For A Better Overgrown Layer - Alvin Yong Shee Meng
ICoSEM 283 Influence of Spinning Speed on the Properties of Sol-Gel Spin Coated ZnO
Films - Zi Neng Ng
ICoSEM 211 Nanostructure of Cr-Doped ZnO Thin Films by Dip Coating - Teerasak
Sirijan
Environmentally Sustainable Materials and Processing
Session 5A 1.30pm – 3.20pm
1.30pm
1.50pm
2.05pm
2.20pm
2.35pm
ICoSEM 322 Monosodium Glutamate Functionalized Chitosan Beads for Adsorption of
Precious Cerium Ion - Dr. Zurhana Mat Husin (Invited Speaker)
ICoSEM 352 Development of Water Adsorbents Synthesized From Spent Bleaching Earth
To Dehydrate Ethanol Water Mixture - Azharin Shah Abd Aziz
ICoSEM 369 Solvent Extraction of Light Rare Earth Ions Using D2EHPA from Nitric Acid
and Sulphuric Acid Solutions - Khaironie
ICoSEM 119 Analysis Of Napier Grass (Pennisetum Purpureum) As Potential Plant For
Becoming An Alternative Fiber In Paper Making Industry - Mohd Zainuri
Mohd Hatta
ICoSEM 370 Preliminary Study on Analysis of The Chemical Compositions and
Characterization of Empty Fruit Bunch (EFB) In Malaysia -Nurul Hazirah
Session 4B 4.10pm – 5.20pm
4.10pm
4.25pm
4.40pm
ICoSEM 189 Kinetic Study Of A Cationic Dye Adsorption By Dewatered Alum Sludge - Dr.
Ong Keat Khim
ICoSEM 244 Kinetic And Isotherm Adsorption Studies Of Methylene Blue On Sulfuric Acid
Treated Spent Grated Coconut (Cocos Nucifera) - Khadijah Khalid
ICoSEM 323 Recycling Aluminium (Al 6061) Chip Through Powder Metallurgy Route Fariza Fuziana
Materials Modeling and Simulations
Session 4A 1.30pm – 3.20pm
1.30pm
1.50pm
2.05pm
ICoSEM 127 Development Of Rapid Tooling For Investment Casting Using Fused
Deposition Modelling Process - Dr. Addanki Sambasiva Rao (Invited
Speaker)
ICoSEM 278 Frontal Cellular Automata Simulations Of Micostructure Evolution During
Shape Rolling - Lukasz Lach
ICoSEM 228 Modeling the Release of Urea from Coated Urea: The Constant Release Stage Assoc. Prof. Dr. Ku Zilati Ku Shaari
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 10
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
2.20pm
2.35pm
3.50pm
ICoSEM 216 Auxetic Properties Of Perforated Sheets Having Hierarchical Designs - Luke
Mizzi
ICoSEM 423 Investigation Of Layer Thickness Effect On The Performance Of Low Cost
And Commercial FDM Printers - Muhammad Syamsuzzaman bin
Shamsuddin
ICoSEM 432 Rigid-plastic Finite Element Simulation of Cold Forging and Sheet Metal
Forming by Eulerian Meshing Method - Wen Chiet Cheong
Materials for Renewable and Energy Conversion
Session 5C 9am – 10.30am
9.00am
9.15am
9.30am
9.45am
10.00am
-
ICoSEM 149 Synergistic Action Of Deep Eutectic Solvents (Dess) And Cellulases For
Lignocellulosic Biomass Hydrolysis - Ahmad Anas Nagoor
ICoSEM 321 Synthesis And Characterization Of Zinc Oxide Nanoparticles For
Thermoelectric Application - Nisha Devaraj
ICoSEM 325 Enhancement of the Efficiency of Dye-sensitized Solar Cells (DSSC) by
Utilizing Silver Plasmonic Nanoparticles on Titania (TiO2) Nanotube
Photoanode - Daniel Angelo Camacho
ICoSEM 367 Thermopower of Benzenedithiol Molecular Junctions with Nickel Electrodes Lee See Kei
ICoSEM 374 Characteristics of porous GaN prepared by KOH photoelectrochemical etching
Rosfariza Radzali
Materials for Energy Storage
Session 2E 2.00 pm – 3.00 pm
2.00pm
2.15pm
2.30pm
ICoSEM 134 Characteristics Of Polycylic Aromatic Hydrocarbons Emissions Of PalmBiodiesel Blend - Dr. Nor Shuhaila Mohamad Sunar
ICoSEM 137 Enhancement Of Polypropylene Twisted Bundle Fiber On The Mechanical
Properties Of High Strength Oil Palm Shell Lightweight Concrete - Yew Ming
Kun
ICoSEM 164 Effect Of Synthetic Antioxidants On Storage Stability Of Calophyllum
Inophyllum Biodiesel - Rizwanul Fattah
Metals and Alloys
Session 2C 9am – 10.30am
9.00am
ICoSEM 335 Study of Surface Hardening on Local Bolt (C= 0.01%) at Temperature 400 0C
for 5 and 6 Hours With Nitrocarburizing Using RF-Plasma Apparatus - Prof.
Dr. rer. nat. Usman Sudjadi ( Invited Speaker)
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 11
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
9.20am
9.35am
9.50am
10.05am
ICoSEM 255 Brazing Of Inconel 600 By Active Filler Metal - Tuan Zaharinie Tuan
Zahari
ICoSEM 360 The Effects Of Scandium On A356 Aluminium Alloy
In Gravity Die Casting - Dr. Lim Ying Pio
ICoSEM 400 Investigation The Structural And Magnetic Properties Of FINMET Type Alloy
Produced By Mechanical Alloying - Tayebeh Gheiratmand
ICoSEM 252 Potentials Of Steel Slag And Copper Mine Tailings As Construction Materials:
A Review - Oluwasola Ebenezer Akin
Session 2D 11.20 am – 1.00 pm
11.20am
11.40am
11.55am
12.10pm
12.25pm
12.40pm
ICoSEM 208 Economic Aspect Of Square Hollow Section (SHS) In The Design Of MultiStorey Unbraced Steel Frame - Dr. Shek Poi Ngian (Invited Speaker)
ICoSEM 381 Brazeability And Mechanical Properties Of Ag-Cu-Sn Brazing Filler Metals
On Copper Brazed Joint - Basri Din Kamar
ICoSEM 153 Microstructural Analysis Of Brazing Sapphire And Inconel600 For Sensor
Applications - Mohd Fadzil Jamaluddin
ICoSEM 376 Failure Analysis Of Flow-Induced Vibration Problem Of In-Serviced Duplex
Stainless Steel Piping System In Oil And Gas Industry - Kong Keen Kuan
ICoSEM 386 Formation of Expanded Austenite using Hybrid Low Temperature
Thermochemical Heat Treatment on 2205 Duplex Stainless Steel - Mohd
Shahriman Adenan
ICoSEM 144 High Temperature Oxidation Effect On The Dissolution Rate Of Hot-Dip
Aluminized Steel In Aluminum Melt - Ayeh Mohsenifar
Session 5E 2.00 pm – 3.00 pm
2.00pm
2.15pm
2.30pm
ICoSEM 438 Preliminary Study On The Feasibility Of Friction Stir Welding In 7075
Aluminum Alloy And Polycarbonate Sheet - Rahmat
ICoSEM 342 Investigation On Solvent-Borne Intumescent Flame Retardant Coatings For
Steel - Yew Ming Chian
ICoSEM 253 Utlization Of Steel Slag For The Construction Of Roads In Pavement Layers A
Review - Zulfiqar Ali
Session 2F 3.05 pm – 4.05 pm, 4.25 pm – 5.25 pm
3.05pm
3.20pm
3.35pm
3.50pm
4.25pm
ICoSEM 437 Real-Time Nondestructive Monitoring Of Temperature Profiles Of Heated
Materials By Ultrasound - Prof Ikuo Ihara (Speaker)
ICoSEM 156 Characteristics Of Hybrid Microwave Sintering Of Zn-Al-Cu-Mg Alloy Maisarah Lutfi
ICoSEM 205 Purification And Conversion Of Malaysian Iron Ores Into Industrial Grade
Iron Oxide Colour Pigment: Methodology And Results - Wong Yuo Wei
ICoSEM 390 Advanced Mechanical Properties Of Commercially Pure Aluminium Tubes
Produced By Tubular Channel Angular Pressing (TCAP) - Mohsen Mesbah
ICoSEM 243 Shear Capacity Of Composite Slab Reinforced With Steel Fibre To That Of
Fabric Reinforcement In Concrete Topping - Noor Nabilah Sarbini
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 12
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
4.40pm
ICoSEM 443 Effect Of Tool Eccentricity On The Joint Strength In Mechanical Clinching
Process - Kam Heng Keong
Nanotechnology
Session 5B 4.10pm – 5.20pm
4.10pm
4.25pm
4.40pm
4.55pm
ICoSEM 229 The Effect of Acid Treatment on Multiwalled Carbon Nanotubes - Syuhaidah
Rahman
ICoSEM 235 Efficiency improvement of Polymer Solar Cells by Adding TiO2 nanopraticles
into the Active Layers - Dr. Yang Ming Lu
ICoSEM 194 Relationship Between Precursor Gas Flow Rate With The Structural And
Morphology Properties Of DLC Films - Ong Wai Kit
ICoSEM 201 Undoped Diamond-Like Carbon Thin Films Grown By Direct Current-Plasma
Enhanced Chemical Vapour Deposition: Structural And Electrical Properties Jackie Chen
Session 4C 9am – 10.30am
9.00am
9.20am
9.35am
9.50am
10.05am
ICoSEM 158 Effects Of Heat Generation Or Absorption On Free Convection Flow Of A
Nanofluid Past An Isothermal Inclined Plate - Dr. Marneni Narahari (Invited
Speaker)
ICoSEM 186 Fabrication And Characterization Of Zno-SnO2 Mixed Nanostructures - T.
Tharsika
ICoSEM 300 Synthesis of Silica-coated Copper Nanoparticles and its Applications - Shohei
Shiomi
ICoSEM 305 Starch Based Biofilm Reinforced With Empty Fruit Bunch (EFB) Cellulose
Nanofiber - Mohd Harfiz Salehudin
ICoSEM 383 Photocatalytic Hydrogen Production on Ta3N5 Nanoparticles Prepared at
Different Nitridation Temperatures - Dr. Leny Yuliati
Session 4D 11.20 am – 1.00 pm
11.20am
11.40am
11.55am
12.10pm
12.25pm
ICoSEM 339 Effect of Vacancy and Stone-Wales Defects on The Shear Strength of Carbon
Nanotube-Polymer Interfaces - Dr. Monon Mahboob (Invited Speaker)
ICoSEM 396 Electrochemical growth of self-organized anodic TiO2 nanotubes for better
photocatalytic degradation reaction - Lau Kung Shiuh
ICoSEM 401 Preparation of Iron (III) Oxide Nanoparticles Using a Mesoporous Carbon
Nitride Template For Photocatalytic Phenol Removal - Nur Azmina Roslan
ICoSEM 406 One-dimensional TiO2 Nanotubes Arrays: Influence of Anodization Voltage
and Their Photocatalytic Activity Performance - Lee Wai Hong
ICoSEM 167 Effect Of Sepiolite On Mechanical And Flammability Properties Of Ethylene
Vinyl Acetate Nanocomposite - Cherghibidsorhi Hossin
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 13
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
12.40pm
ICoSEM 214 Dispersion Behaviour And Agglomeration Effects Of Zinc Oxide
Nanoparticles In Ethanol-Water Mixtures - Dr. Rajashekhar Pendyala
Session 4F 3.05 pm – 4.05 pm, 4.25 pm – 5.25 pm
3.05pm
3.20pm
3.35pm
3.50pm
4.25pm
4.40pm
4.55pm
5.10pm
ICoSEM 107 Investigation Of Nanoscale Structure Of Self-Emulsifying Drug Delivery
System Containing Poorly Water-Soluble Model Drug - Prof. Dr. Mont
Kumpugdee Vollrath (Invited Speaker)
ICoSEM 310 Fabrication and Characterization of Chitosan/PVA nanofibers Via
Electrospinning - Sepher Talbien
ICoSEM 394 A Study On Growth Formation Of Nano-Sized Magnetite Fe3O4 Via CoPrecipitation Method - Lim You Sing
ICoSEM 187 Microstructural And Electrical Conductivity Of Annealed ZnO Thin Films
- Peh Ly Tat
ICoSEM 385 Formation Of Chemically Synthesized Manganese Oxide Nanostructures With
Various Morphologies - Ronak Janani
ICoSEM 413 Synthesis and Characterization of Mn2+ doped ZnS using Reverse Miceller
Method - Rahizana Bt Mohd Ibrahim
ICoSEM 405 Facile Synthesis of Magnetite Iron Oxide Nanoparticles via Precipitation
Method by Controlling Reaction Temperatures - Mun Foong Tai
ICoSEM 138 Viscosity Data Of Al2O3/Water And Al2O3/ (Eg/Water) Mixture Nanofluids
And The Hysteresis Phenomenon - Zafar Said
Polymers
Session 1C 9am – 10.30am
9.00am
9.20am
9.35am
9.50am
10.05am
ICoSEM 108 Effect Of The Addition Of Nanoclay On The Physical Property And The MeltSpinnability Of Bacterial Polyester - Prof. Hideki Yamane (Invited Speaker)
ICoSEM 139 Synthesis, Characterization And Antioxidant Activities Of Cu(II) Complexes
Of Substituted Triazine - Abdul Aziz Ali Mohd Alomari
ICoSEM 221 Quasi-Static Indentation Behaviour Of Glass Fibre Reinforced Polymer - Syed
Muhd Azwan
ICoSEM 356 Mechanical, Thermal, and Morphological Properties of Thermoplastic
Starch/Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends Sujaree Tachaphiboonsap
ICoSEM 368 Performance of Intrinsic Conducting Polymer Current-Limiting Device (CLD):
Statistical Analysis and Predictions - Hafezali Iqbal Hussain
Session 1D 11.20 am – 1.00 pm
11.20am
11.40am
11.55am
ICoSEM 419 Bio-based Polymers: Establishing a New Paradigm for Materials Innovation Prof Yoshiharu Kimura (Invited Speaker)
ICoSEM 395 The Effect of Wollastonite Filler on Thermal Performance of Intumescent Fire
Retardant Coating - M. Zia Ul Mustafa
ICoSEM 264 Flexural Response Of Nanoclay-Modified Epoxy Polymers - Widia Wahyuni
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 14
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
12.10pm
12.25pm
12.40pm
ICoSEM 203 Heparin Imprinted Polymer Prepared By Sol-Gel Process On Silica
Microparticles Surface: Analysis Of Template Removal And Binding
Performance - Azalina Mohamed Nasir
ICoSEM 328 Preparation, Characterisation And Performance Of Polyvinylidene Fluoride
Membrane For Sodium Chloride Rejection In Direct Contact Membrane
Distillation - Chong Kok Chung
ICoSEM 311 The Creep Master Curve Construction For The Polyamide 6 By The Stepped
Isostress Method - Mohamad Hadid
Session 4E 2.00 pm – 3.00 pm
2.00pm
2.15pm
2.30pm
ICoSEM 379 Rheological Behavior Characterization of Natural Rubber Containing Different
Gel - Saengchao Thongseevich
ICoSEM 326 Small Band Gap Polymers For Organic Photovoltaics - Hammed Wasiu
Adebayo
ICoSEM 126 Phosphate Esters From Epoxidized Palm Kernel Oil And Soybean Oil - Nur
Rabbiatul Adawiyah
Session 1F 3.05 pm – 4.05 pm, 4.25 pm – 5.25 pm
3.05pm
3.20pm
3.35pm
3.50pm
4.25pm
4.40pm
ICoSEM 188 Study Of Physical And Spray Properties Of Biopolymer Starch Adhesives At
Elevated Temperature - Mohd Yasin Naz
ICoSEM 306 Novel Bio Based Resins from Blends of Functionalized Palm Oil and
Unsaturated Polyester Resin - Siti Nur Hidayah Mustapha
ICoSEM 133 Functionalisation Of Ethylene-Propylene Copolymer (EPM) By Melt Grafting
Of Maleic Anhydride (MAH) Using High Shear Internal Mixer - Mazlin Aida
ICoSEM 136 Changes In Characteristics And Physicochemical Through Vermicomposting
Of Pome Sludge By Epigeic Earthworm E. Eugeniae - Biddatul Syirat
Zainal
ICoSEM 263 Thermogravimetry Analysis Of Nanosilica Filled Epoxy Polymer - Nur
Hidayah Zamani
ICoSEM 197 Surface Modification of Poly (lactic acid) (PLA) via Alkaline Hydrolysis
Degradation - Tham Cho Yin
List of Poster Presentations
Poster Session 1 3.40 pm – 4.10 pm
ICoSEM 117
ICoSEM 131
Stoichiometric Zro2 Thin Film Based On Si Characterized By Angle –Resolved X-Ray
Photoelectron Spectrometer - Dr. Wong Yew Hoong
Phase and Surface Area Studies of Maghemite Nanoparticles Dispersed in Silica Gel Dr. Ang Bee Chin
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 15
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
ICoSEM 141
ICoSEM 246
ICoSEM 313
ICoSEM 241
ICoSEM 382
ICoSEM 444
ICoSEM 425
ICoSEM 426
ICoSEM 154
ICoSEM 161
ICoSEM 165
ICoSEM 174
ICoSEM 182
ICoSEM 440
ICoSEM 106
ICoSEM 319
ICoSEM 291
ICoSEM 230
A Continuum Mechanical Modelling Of Mullins Effect In Swollen Elastomers - Loo
Mei Sze
Alumina Reinforced Epoxidized Natural Rubber In Latex Phase Mixing: Effect Of
Alumina Content - Dr Chuanpit Khaokong
Sintering Effects On Microstructure And Electrical Properties Of
(Na0.5K0.5)0.94Li0.06nbo3 Lead Free Ceramics - Dr. Pornsuda Bomlai
Novel Approach For CO2 Enriched Natural Gas Dehydration Via Adsorption Using
13x Zeolite As Solid Desiccant - Firas Ayad
Effect of Compatibilizer on the Accelerated Weathering Performance of
Polypropylene/Silica Nanocomposites - Anis Sofiah Mudzafar Kamil
The Effect Of Mg Doping On The Performance Of Inverted Type
Organic Solar Cell Based On ZnO Nanorod Arrays - Dr. Yap Chi Chin
Oxygen Gas Sensing of Al/LaxCeyOz/Si Metal-Oxide-Semiconductor Gas Sensor Lim Way Foong
Effects of Post-Deposition Annealing Time in Oxygen Ambient on Y2O3 Film
Deposited on Silicon Substrate - Quah Hock Jin
Microhradness Of Al2o3 Nanoparticles Added Yba2cu3o7 Superconductor Prepared
Using Auto-Combustion Reaction - Mohd Shahadan Suan
Statistical Analysis Of Binder Behavior During Debinding Step In Powder Injection
Molding (PIM) - Dr.Nutthita Chuankrerkkul
Crystalline Properties Of Polylactide Acid (PLA) Filled Aragonite CaCO3 Derived
From Polymesoda Bengalensis (Lokan) Shell - Nur Damia Ismail
Reflow Of Sn-3.8 Ag-0.7 Cu Solder On Ni Substrate In Presence Of
Mo Nanoparticles - Mohammad Hossein Mahdavifard
Structural And Optical Properties Of Zno Thin Films Obtained By Spray Pyrolysis Kalyani Nadarajah
Comparison of Starch Fiber Filled- Polyvinyl Alcohol and Starch Filled-Polyvinyl
Alcohol under Tensile Analysis - Mohd Shahrul Nizam Bin Salleh
X-Ray Ct Scan Analysis Of Oxidized Welded AA6061 Al Alloy
- Nur Azida Che Lah
Improved Processability Of Electrospun Poly [(R)-3-Hydroxybutyric Acid] Through
Blending With Medium Chain Length Poly (3-Hydroxyalkanoates) Produced By
Pseudomonas Putida From Oleic Acid - Pedram Azari
The interaction between Sugar-Based Surfactant and Single-Walled Carbon
Nanotubes: a Theoretical Study - Zahrabatoul Mosapour Kotena
Synthesis, Characterization and Stability of Superparamagnetic Maghemite
Nanoparticle Suspension - Irwan Nurdin
Poster Session 2 10.50 am – 11.20 am
ICoSEM 225
ICoSEM 233
Synthesis, Optical, Photocatalytic and Bactericidal Properties of Nanocrystalline ZnO
Powders Prepared by Precipitation Method - Dr. Sumetha Suwan Boon
Photocatalytic Activity Of Photocatalyst In Ag3PO4-Agi System - Pongsaton
Amornpitoksuk
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 16
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
ICoSEM 236
ICoSEM 237
ICoSEM 259
ICoSEM 240
ICoSEM 261
ICoSEM 262
ICoSEM 265
ICoSEM 269
ICoSEM 272
ICoSEM 284
ICoSEM 302
ICoSEM 434
ICoSEM 330
ICoSEM 340
ICoSEM 343
ICoSEM 183
ICoSEM 411
ICoSEM 417
ICoSEM 421
ICoSEM 431
ICoSEM 436
ICoSEM 441
ICoSEM 219
ICoSEM 402
ICoSEM 226
ICoSEM 266
Wire Sweep Improvement Study Of Multi-Tier Palladium-Copper (Pd-Cu) Wire
Bonding On LQFP Package Using Low Alpha Green Mold Compound
- Siti Sofiyah Skh Ali
Synthesis Of Bioactive Titaniananofibrous Structures Via Oxidation - Tan Ai Wen
Development Of Insulated Cu Wire Stitch Bonding - Leong Hyung Yang
An Extended Two-Phase Model For Mullins Effect In Swollen Rubber - Chai Ai Bao
Effects of Complexing Agent Concentration and Bath pH on Electroless Nickel
Deposition for Tungsten Carbide Powders - Pranee Rattanawaleedirojn
Corrosion Behavior Of Soldered And Laser-Welded Ni-Free Co-Cr Alloy Joints In
Sodium Chloride Solution - Kanokwan Saengkiettiyut
The Prospects Of Electricity Generation From Poultry Processing Dewatered Sludge
(PPDS) In Malaysia - Mohd Fadhil Harfiez
Synthesis And Characterization Of Nanostructured Co-Pt Magnetic Films
Electrodeposited From Tartrate-Stabilized Chloride Baths - Dr Teh Seoh Hian
Hardness And Compressive Properties Of Calcium Carbonate Derived From Clam
Shell Filled Unsaturated Polyester Composites - Mahshuri Yusof
Influence Of Copper And Mild Steel On Stability Of Palm Biodiesel - Rafi Jakeria
Effect Of Carbon Black Content On The Swelling Of Elastomers In Solvent In The
Presence Of Static Mechanical Loading - Tee Yun Lu
Preparation and Characterization Electrospun Silica Nanofibers - Sepher Talbien
Effect of The Thermal Aging on the Mechanical Properties of Empty Fruit Fiber
Filled Polyvinyl Alcohol Biocomposites - Dr. Ching Yern Chee
Optimization And Material Volume Reduction For A Gear Reducer By Evolutionary
Algorithm - Padmanabhan
Effect Of Fillers On Crystal Structures And Electronic Properties Of CoSb3-Based
Skutterudites - Dr. Long Bui Duc
Low Temperature Degradation and Defect Relationship in YSZ Ceramic
- Ubenthiran S.
A Study On Biocompatibility Of Gadolinium Based Anodizing Coating AZ91D
Magnesium Alloy in Simulated Body Fluid (SBF) Solution - Nor Fadzillah bt Toha
Preparation and Characterization of Microencapsulated Paraffin Wax with Polyaniline
Based Polymer Shells for Thermal Energy Storage - Mahyar Silakhori
Stability Evaluation Of Titania Nanofluid By Uv-Vis Spectrophotometer - Dr.
Azadeh Ghadimi
Kenaf Fibre and Polymer Matrix Resin Composites - Noor Haznida Bt Abu Bakar
Optical Studies Of Chitosan Capped Gold Nanoparticles - Norfazila Mohd Sultan
An In-Vitro Study On The Proliferative Potential Of Rat Bone Marrow Stem Cells On
Electrospun Fibrous Polycaprolactone Scaffolds Containing Micro Hydroxyapatite
Particles - Mohd Haris Akram
Flexural And Tensile Behavior Of Kenaf Fiber Composite Materials - Syed Mohd
Azwan
Simple and Low-cost Preparation of Carbon-Coated Titanium Dioxide via
Hydrothermal Method - Mohd Hayrie Mohd Hatta
Role Of Mechanical Alloying Parameters On Powder Distribution Of Al/Cu Alloy
And Al/Cu Composite - Nur Ayuni Jamal
A Non-Isothermal Thermo Gravimetric Kinetic Analysis Of Malaysian PoultryProcessing-Dewatered-Sludge - Abbas Hassan Abbas Atya
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 17
1st International Conference on Science & Engineering of Materials 2013 (ICoSEM2013)
13 & 14 November 2013
Sunway Putra Hotel
Kuala Lumpur, Malaysia
ICoSEM 318
ICoSEM 422
Thermal Conductivity Of Calcium Carbonate Filled With Unsaturated Polyester
Composites With Different Filler Sizes - Mahshuri Yusof
Characteristics Of Combustion And Pyrolysis Of Biomass From Lowland, Tropical
Rainforests - Dr. Nasrin Aghamohammadi
1st International Conference on Science and Engineering of Materials (ICoSEM 2013)
Page 18