http://www.datasheetdir.com/Regulators


UCC561,27-Line Low Voltage Differential SCSI Bias Regulator
The UCC561 low-voltage differential (LVD) Regulator set is designed to provide the correct
references voltages and bias currents for LVD termination resistor networks (475 , 121 , and 475 ).
The device also provides a 1.3-V output for "diff sense" signaling. ...


PT6914,-2.0Vout 10W 3.3V-Input Adjustable Plus To Minus Voltage Converter
The PT6910 series is a series of high performance 12 watt, plus to minus voltage convertors
that are designed to power the latest ECL (5.2V) and GaAs (-2.0V) ICs from an existing +5.0V or
+3.3V source.
These regulators are similar to the popular PT6900 ...


PT6915,-5.2Vout 12W 3.3V-Input Adjustable Plus To Minus Voltage Converter
The PT6910 series is a series of high performance 12 watt, plus to minus voltage convertors
that are designed to power the latest ECL (5.2V) and GaAs (-2.0V) ICs from an existing +5.0V or
+3.3V source.
These regulators are similar to the popular PT6900 ...


SG6105A,Power Supply Supervisor + Regulator + PWM
SG6105A controller is designed for switching-mode power supplies for desktop PCs. It
provides all the functions necessary to monitor and control the output of the power supply. Remote
ON/OFF control, power-good circuitry, and protection features against ...


LP2951,Adjustable Micro Power Voltage Regulator
The LP2951 is an adjustable micro power voltage Regulator suitable for use in batterypowered systems. This Regulator has various functions such as alarm which warns of a low output
voltage, often due to falling batteries on the input, the external ...


KA78R08C,1A Fixed 8V Low Dropout Voltage Regulator (LDO)
The KA78RXXC is a low-dropout voltage Regulator suitable for various electronic
equipments.
It provides constant voltage power source with TO-220-4 lead full mold package. Dropout voltage of
KA78RXXC is below 0.5V in full rated current (1A).
This ...


FAN1589,2.7A, 1.2V Low Dropout Linear Regulator For VRM8.5
The FAN1589 is a low dropout three-terminal Regulator with 2.7A output current capability.
This device has been optimized for VTT bus termination, where transient response and minimum
input voltage are critical. The FAN1589 offers fixed 1.2V with 2.7A current ...

FAN1616A,0.5A Adjustable Low Dropout Linear Regulator

The FAN1616A and FAN1616A-1.8 ,-2.5, -3.3 and -5 are low dropout three-terminal
regulators with 0.5A output current capability. These devices have been optimized for applications
where transient response and minimum dropout voltage are critical. The 5V ...


KA78R09C,1A Fixed 9V Low Dropout Voltage Regulator (LDO)
The KA78RXXC is a low-dropout voltage Regulator KA78R09C suitable for various
electronic equipments.
It provides constant voltage power source with TO-220-4 lead full mold package. Dropout voltage of
KA78RXXC is below 0.5V in full rated current (1A).


KA76L05,0.1A Fixed 5V Low Dropout Voltage Regulator (LDO)
KA76L05 is a fixed 3-terminal low dropout voltage Regulator KA76L05 designed to need
very low quiescent current. Internally, implemented circuits include 60V load dump protection, -50V
reverse transient short circuit and thermal over load protection.


KA78R15C,1A Fixed 15V Low Dropout Voltage Regulator (LDO)
The KA78RXXC is a low-dropout voltage Regulator KA78R15C suitable for various
electronic equipments.
It provides constant voltage power source with TO-220-4 lead full mold package. Dropout voltage of
KA78RXXC is below 0.5V in full rated current (1A).

ISL6421,Single Output LNB Supply And Control Voltage Regulator With I2C Interface
For Advanced Satellite Set-top Box Designs
The ISL6421 is a highly integrated solution for supplying power and control signals from
advanced satellite set-top box (STB) modules to the low noise block (LNB). This device is comprised
of a current-mode boost PWM and a low-noise linear Regulator along ...








ISL6421A,Single Output LNB Supply And Control Voltage Regulator With I2C
Interface For Advanced Satellite Set-top Box Designs
The ISL6421A is a highly integrated solution for providing power and control signals from
advanced satellite set-top box (STB) modules to the low noise block (LNB). The internal architecture
of this device contains a current-mode boost PWM and a low-noise ...
ISL6423,Single Output LNB Supply And Control Voltage Regulator With I2C Interface
For Advanced Satellite Set-Top Box Designs, DiSEqC 2.0 Compatible
The ISL6423 is a highly integrated voltage Regulator and interface IC, specifically designed
for supplying power and control signals from advanced satellite set-top box (STB) modules to the low
noise blocks (LNBs) of single antenna ports. The device consists ...
ISL6423B,Single Output LNB Supply And Control Voltage Regulator With I2C
Interface For Advanced Satellite Set-Top Box Designs
The ISL6423B is a highly integrated voltage Regulator and interface IC, specifically designed
for supplying power and control signals from advanced satellite set-top box (STB) modules to the low
noise blocks (LNBs) of singe antenna ports. The device consists ...
ISL6425,Single Output LNB Supply And Control Voltage Regulator With I2C Interface
For Advanced Satellite Set-top Box Designs

The ISL6425 is a highly integrated solution for supplying power and control signals from
advanced satellite set-top box (STB) modules to the low noise block (LNB). This device is comprised
of a current-mode boost PWM and a low-noise linear Regulator along ...

ISL6405,Dual Output LNB Supply And Control Voltage Regulator With I2C Interface
For Advanced Satellite Set-top Box Designs
The ISL6405 is a highly integrated voltage Regulator and interface IC, specifically designed
for supplying power and control signals from advanced satellite set-top box (STB) modules to the low
noise blocks (LNBs) of two antenna ports. The device is comprised ...







ISL6422,Dual Output LNB Supply And Control Voltage Regulator With I2C Interface
For Advanced Satellite Set-Top Box Designs
The ISL6422 is a highly integrated voltage Regulator and interface IC, specifically designed
for supplying power and control signals from advanced satellite set-top box (STB) modules to the low
noise blocks (LNBs) of two antenna ports. The device is consists ...
ISL6422B,Dual Output LNB Supply And Control Voltage Regulator With I2C Interface
For Advanced Satellite Set-Top Box Designs
The ISL6422B is a highly integrated voltage Regulator and interface IC, specifically designed
for supplying power and control signals from advanced satellite set-top box (STB) modules to the low
noise blocks (LNBs) of two antenna ports. The device is consists ...
ISL6424,Dual Output LNB Supply And Control Voltage Regulator With I2C Interface
For Advanced Satellite Set-Top Box Designs
The ISL6424 is a highly integrated voltage Regulator and interface IC, specifically designed
for supplying power and control signals from advanced satellite set-top box (STB) modules to the low
noise blocks (LNBs) of two antenna ports. The device is comprised ...


ICL7663S,CMOS Programmable Micropower Positive Voltage Regulator
The ICL7663S Super Programmable Micropower Voltage Regulator is a low power, high
efficiency positive voltage Regulator which accepts 1.6V to 16V inputs and provides adjustable
outputs from 1.3V to 16V at currents up to 40mA.
It is a direct replacement ...


EL7536,Monolithic 1A Step-Down Regulator
The EL7536 is a synchronous, integrated FET 1A step-down Regulator with internal
compensation. It operates with an input voltage range from 2.5V to 5.5V, which accommodates
supplies of 3.3V, 5V, or a Li-Ion battery source. The output can be externally set from ...


TDA3606A,TDA3606A Multiple Voltage Regulator With Battery Detection
The TDA3606A is a low power voltage Regulator It contains: One fixed voltage Regulator
with a foldback current protection, intended to supply a microprocessor, that also operates during load
dump A reset-signal can be used to interface with ...

TDA3606,TDA3606 Multiple Voltage Regulator With Battery Detection

The TDA3606 is a low power voltage Regulator It contains: One fixed voltage Regulator
with a foldback current protection, intended to supply a microprocessor that also operates during load
dumpA reset-signal can be used to interface with the ...


TDA3616,TDA3616 Multiple Voltage Regulator With Battery Detection
The TDA3616 is a low power voltage Regulator It contains the following:One fixed voltage
Regulator with a foldback current protection, intended to supply a microprocessor, that also operates
during load dumpA provision for use of a reserve supply capacitor ...


TDA3617,TDA3617 Multiple Voltage Regulator
The TDA3617 is a multiple output voltage Regulator with three independent regulators. It
contains: Three fixed voltage regulators with foldback current protection (regulators 1, 2 and 3) A
supply pin that can withstand load dump pulses and negative supply ...


TDA3681,TDA3681 Multiple Voltage Regulator With Switch And Ignition Buffer
The TDA3681 is a multiple output voltage Regulator with a power switch and an ignition
buffer. It is intended for use in car radios with or without a microcontroller. The TDA3681 contains
the following: Four fixed voltage regulators with a foldback ...


TDA3682,TDA3682 Multiple Voltage Regulator With Power Switches
The TDA3682 is a multiple output voltage Regulator with power switches, intended for use
in car radios with or without a microprocessor. The TDA3682 contains the following: Four switchable
regulators and one permanent active Regulator (BU5V) Two power ...


TDA3602,TDA3602 Multiple Output Voltage Regulator
The TDA3602 is a multiple output voltage Regulator intended for use in car radios with or
without a microprocessor. It contains two fixed voltage regulators with foldback current protection
(Regulators 1 and 2), and one fixed voltage Regulator that also ...


RH117,RH117 - Positive Adjustable Regulator
The RH117 is a 3-terminal positive adjustable Regulator capable of supplying up to 0.5A (H
package) or 1.5A (K package). The output is adjusted using two external resistors for a range of 1.2V
to 37V. The devices have full current limit thermal overload safe ...


RH137,RH137 - Negative Adjustable Regulator
The RH137 negative adjustable Regulator will deliver up to 1.5A output current over an
output voltage range of 1.2V to 22V.
Every effort has been made to make these devices easy to use and difficult to damage. Internal current
and power limiting coupled ...

STV8130AD,ADJUSTABLE AND +3.3 V DUAL VOLTAGE REGULATOR WITH
DISABLE AND RESET FUNCTIONS
The STV8130A and STV8130D are monolithic dual positive voltage regulators designed to
provide a fixed precision output voltage of 3.3 V and an adjustable voltage between 2.8 and 16 V for
currents up to 750 mA. ...


STV8131,5V AND 8V VOLTAGE REGULATOR

The STV8131 is a monolithic dual positive voltage Regulator designed to provide fixed
precision out- put voltages of 5V and 8V at currents up to 1A. Each output can be disabled separately
by a TTL input. Short circuit and thermal protections are included. ...


STV8162,Triple-Voltage Regulator With Disable And Reset Functions
The STV8162 and STV8162D are monolithic triple positive voltage regulators designed to
provide three fixed precision output voltages of 5 V, 5 V and 8 V for currents up to 0.6 A. An internal
reset circuit generates a reset pulse when the voltage of ...


STESB01,ESBT Base Driver
The STESB01 is a dedicated base current biasing transistor for the Emitter-Switched Bipolar
Transistor (ESBT) family of power switches. The device is able to control the ESBT storage time
(from 150ns to 1.5s) using closed loop architecture. This ...


L9468,All Silicon Voltage Regulator
The L9468 is a monolithic multifunction generator Voltage Regulator intended for use in
automotive applications. This device regulates the output of an automotive generator by controlling
the field winding current by means of a variable frequency PWM ...


L9473,CAR ALTERNATOR VOLTAGE REGULATOR
The L9484 is a monolithic multifunction generator Voltage Regulator intended for use in
automotive charging applications. This All Silicon Voltage Regulator regulates the out- put of an
automotive generator by controlling the field winding current by ...


L9474,ALL SILICON VOLTAGE REGULATOR
The L9474 is a monolithic multifunction generator Voltage Regulator intended for use in
automotive ap- plications. This device regulates the output of an automotive generator by controlling
the field winding current by means of a variable frequency PWM ...


L9484,CAR ALTERNATOR VOLTAGE REGULATOR
The L9484 is a monolithic multifunction generator Voltage Regulator intended for use in
automotive charging applications. This All Silicon Voltage Regu- lator regulates the output of an
automotive generator by controlling the field winding current by means ...


L9407F,CAR ALTERNATOR VOLTAGE REGULATOR
The L9407F is a monolithic multifunction alternator voltage Regulator intended for use in
automotive ap- plication. It includes the control section, the field pow- er stage, fault diagnostic circuit
which drives a warning lamp, and the protection against ...


L585,CAR ALTERNATOR REGULATOR
The L585 is an integrated circuit designed for use with an NPN darlington as a voltage
Regulator in a threephase alternator charging system. It includes fault diagnostic circuitry which
drives a 3 W warning lamp in fault conditions such as open or short ...

L9911,Car Alternator Multifunction Smart Voltage Regulator

The L9911 is a monolithic multifunction alternator voltage Regulator intended for use in
automotive application. ...


L4925,VERY LOW DROP VOLTAGE REGULATOR
The L4925 is a monolithic integrated 5V voltage Regulator with a very low dropout output
and additional functions such as power-on reset and programmable reset delay time. ...


L4938E,ADVANCED VOLTAGE REGULATOR
The L4938E/L4938ED/L4938EPD is a monolithic integrated dual voltage Regulator with two
very low dropout outputs and additional functions as power-on re- set and input voltage sense. It is
designed for supplying the microcomputer controlled ...


L4938N,DUAL MULTIFUNCTION VOLTAGE REGULATOR
The L4938N is a monolithic integrated dual voltage regulators with two very low dropout
outputs and ad- ditional functions such as power-on reset and input voltage sense. They are designed
for supplying mi- crocomputer controlled systems specially in ...


L4947PD,5V-0.5A VERY LOW DROP REGULATOR WITH RESET
The L4947PD is a monolithic integrated circuit in HiPSO package specially designed to
provide a stabilized supply voltage for automotive and in- dustrial electronic systems. Thanks to its
very low voltage drop, in automotive applications the L4947PD can ...


L4949,MULTIFUNCTION VERY LOW DROP VOLTAGE REGULATOR
The L4949E is a monolithic integrated 5V voltage Regulator with a very low dropout output
and addi- tional functions as power-on reset and input volt- age sense. It is designed for supplying the
micro- computer controlled systems especially in automotive ...


L5957,Multifunction Voltage Regulator For Car Radio
The L5957 contains a triple voltage Regulator and a power switch. ...


L4936E,ADVANCED VOLTAGE REGULATOR
The L4936E is a monolithic integrated dual volt- age Regulator with two very low dropout
outputs and additional functions as power-on reset and in- put voltage sense. It is designed for
supplying the microcomputer controlled systems especially ...


L4937N,DUAL MULTIFUNCTION VOLTAGE REGULATOR
The L4937N is a monolithic integrated dual voltage regulators with two very low dropout
outputs and ad- ditional functions such as power-on reset and input voltage sense. It is designed for
supplying micro- computer controlled systems specially in ...


RHFL4913,Rad-hard Adjustable Positive Voltage Regulator
The RHFL4913 high-performance adjustable positive voltage Regulator provides exceptional
radiation performance. It is tested in accordance with Mil Std 883E Method 1019.6, in ELDRS
conditions. ...

RHFL7913,Rad-Hard Adjustable Negative Voltage Regulator

The RHFL7913 adjustable is a high performance Rad Hard negative voltage Regulator
Available in Flat-16 and new SMD5C hermetic ceramic packages, it is specifically intended for space
and harsh radiation environments. It provides exceptional ...


SP2996B,SP2996B -2A Regulator For DDR Bus Termination
The SP2996B voltage Regulator is designed to convert voltage supplies ranging from 1.6V to
6V into a desired output voltage which is adjusted by an external resistor divider. The Regulator is
capable of sourcing or sinking up to 2A of Continuous current ...


M62230FP,LCD Matrix Regulator
The M62230FP is a semiconductor circuit for LCD matrix Regulator which will generate the
divided-voltage to drive LCD matrix. By changing the connection of R pin (i.e., Change the internal
resistor ratio), M62230FP can support divided voltage ratio ...

UPC3018,LOW-SATURATION STABILIZED POWER SUPPLY WITH ON/OFF
FUNCTION
The UPC3018, UPC3025 are low-saturation type regulators with an output current of 1 A at
respective output voltages of 1.8 and 2.5 V. These regulators are also provided with an ON/OFF
function, which reduces the dissipation when there is no load, making ...



UPC37M21,TWO-OUTPUT POSITIVE VOLTAGE REGULATORS
The UPC37M21 series is a series Regulator with two outputs, OUTPUT1: 1 A and
OUTPUT2: 0.5 A, built in a single package. OUTPUT1 outputs 3.3 V or 2.5 V, and OUTPUT2
outputs 1.8 V or 2.5 V. This series can be used to realize set miniaturization and ...


UPC3005,LOW-SATURATION STABILIZED POWER SUPPLY
The UPC3005, UPC3033 are low-saturation type regulators with an output current of 1 A at
respective output voltages of 3.3 V and 5 V. These regulators are also provided with an ON/OFF
function, which reduces the dissipation when there is no load, ...


A8286,Dual LNB Supply And Control Voltage Regulator
Intended for analog and digital satellite receivers, this dual low-noise block converter
Regulator (LNBR) A8286 is a monolithic linear and switching voltage Regulator specifically
designed to provide the power and the interface signals to two LNB down ...


A8292,Dual LNB Supply And Control Voltage Regulator
Intended for analog and digital satellite receivers, this dual low-noise block converter
Regulator (LNBR) is a monolithic linear and switching voltage Regulator specifically designed to
provide the power and the interface signals to two LNB down converters ...


UAC3092,Alternator Voltage Regulator
The UAC3092 is specifically designed for voltage regulation and Load Response Control
(LRC) of diode rectified alternator charging systems, as commonly found in automotive applications.
In maintaining system voltage, the UAC3092 monitors and compares ...

UAC3092A,Alternator Voltage Regulator

The UTC UAC3092A is designed for Load Response Control and voltage regulation of diode
rectified alternator charging systems for automotive applications. ...


R200LD10,Voltage Regulator
voltage Regulator R200LD10 The UTC R200LD10 shows a high current, high accuracy,
low-dropout voltage. The feature are: low dropout voltage, very low ground current. Cause the series
have been designed for high current loads, so they are also used in ...

78DXX,0.5A(Io)/2.0V(Vd)Positive Fixed Voltage Regulator 3.3V 4.7V
,5V,6V,8V,9V,12V,15V,18V,24V
The UTC 78DXX family is monolithic fixed voltage Regulator integrated circuit. They are
suitable for applications that required supply current up to 0.5 A. ...



78L05,0.1A/1.7V Positive Fixed Voltage Regulator 5V,6V,8V,9V,12V,15V,18V,24V
0.1A/1.7V Positive Fixed Voltage Regulator 5V,6V,8V,9V,12V,15V,18V,24V 78LXX The
UTC 78LXX family is monolithic fixed voltage Regulator integrated circuit. They are suitable for
applications that required supply current up to 100mA. ...


78M05,3-TERMINAL 0.5A POSITIVE VOLTAGE REGULATOR
0.5A(Io)/2.0V(Vd)Positive Fixed Voltage Regulator 5V,6V,8V,9V,12V,15V,18V,24V
78MXX ...


79L05,3-TERMINAL 0.1A NEGATIVE VOLTAGE REGULATOR
The UTC 79LXX family is monolithic fixed voltage Regulator integrated circuit. They are
suitable for applications that required supply current up to 100mA. ...


LM317,1.0A Positive Adjustable Voltage Regulator 1.25V TO 37V
The UTC LM317 is an adjustable 3-terminal positive voltage Regulator designed to supply
1A of output current with voltage adjustable from 1.3V ~ 37V. ...


LM317L,Low Current 1.25v To 37v Adjustable Voltage Regulator
low current 1.25v to 37v adjustable voltage Regulator LM317L The UTC LM317L is a
monolithic integrated circuit, designed to supply 100mA of output current with voltage adjustable
from 1.25V ~ 37V. ...


LM317M,0.5A Positive Adjustable Voltage Regulator 1.25V TO 37V
0.5A Positive Adjustable Voltage Regulator 1.25V TO 37V LM317M The UTC LM317M is
an adjustable 3-terminal positive voltage Regulator designed to supply 500mA of output current with
voltage adjustable from 1.2V ~ 37V. ...


LM7805,3-TERMINAL 1A POSITIVE VOLTAGE REGULATOR
The UTC LM78XX family is monolithic fixed voltage Regulator integrated circuit. They are
suitable for applications that required supply current up to 1 A. ...

UR5512,2A Ddr Bus Termination Regulator

The UR5512 is a linear Regulator which provides up to 2 Amp bi-directional driving and
sinking capability for DDR SDRAM bus terminator application. The output termination voltage tracks
the reference voltage applied at VREF pin. A resistor divider ...


UR5515,1.5a/3a Bus Termination Regulator
The UTC UR5515 is a linear bus termination Regulator and designed to convert voltage
supplies ranging from 1.6V~6.0V into a desired output voltage, which adjusted by two external
voltage divider resistors. The device can both source and sink up to ...


UR5516,3a Bus Termination Regulator
The UTC UR5516 is designed to provide a regulated voltage with bi-directional output current
for DDR-SDRAM termination. Current-limit work to limit the short-circuit current, on-chip thermal
shutdown provides protection against any combination of ...


UR5516A,3a Bus Termination Regulator
The UTC UR5516A is designed to provide a regulated voltage with bi-directional output
current for DDR-SDRAM termination. Current-limit work to limit the short-circuit current, on-chip
thermal shutdown provides protection against any combination of ...


UR5516B,3a Bus Termination Regulator
The UTC UR5516B is a low cost linear Regulator designed to provide a desired output
voltage or termination voltage for various applications by converting voltage supplies ranging from
1V to 6.0V. The desired output voltage could be programmable by two ...


UR5516C,3a Bus Termination Regulator
The UTC UR5516C is a low cost linear Regulator designed to provide a desired output
voltage or termination voltage for various applications by converting voltage supplies ranging from
1V to 6.0V. The desired output voltage could be programmable by two ...


UR5595,Ddr Termination Regulator
The UTC UR5595 is a linear bus termination Regulator designed to meet JEDEC SSTL-2
and SSTL-3 (Stub Series Terminated Logic) specifications for termination of DDR-SDRAM. The
device contains a high-speed operational amplifier to provide excellent ...


UR5596,Ddr Termination Regulator
The UTC UR5596 is a linear bus termination Regulator and designed to meet JEDEC SSTL2(Stub-Series Terminated Logic) specifications for termination of DDR-SDRAM. It also can be used
in SSTL-3 or HSTL (High-Speed Transceiver Logic) scheme. The device ...


LR478,Regulator+reset Ic
The UTC LR478 developed for use in CD-ROM drives, combines a 3V Regulator adapted to
low power consumption with a much-sought reset function (regulator input monitoring),with internal
delay circuit, set to detect 4.2V. ...

UC723,Adjustable Voltage Regulator

The UTC UC723 is a silicon monolithic integrated circuit, designed for service as voltage
Regulator at output voltages, ranging from 2V to 37V at current up to 150mA. It includes a
temperature-compensated reference amplifier, an error amplifier, a ...


CMPWR101,250mA SmartOR� Regulator With VAUX Switch
The California Micro Devices SmartORTM CMPWR101 is a low dropout Regulator that
delivers up to 250mA of load current at a fixed 3.3V output. An internal threshold level (typically
4.1V) is used to pre- vent the Regulator from being operated below ...


CM3103,400mA SmartORTM Regulator With VAUX Switch
The CM3103 combines a fixed voltage Regulator and a VAUX switch in a single 8-pin SOIC
package. The volt- age Regulator is capable of delivering up to 400mA con- tinuously at 3.3V. The
output power is provided from two independent input voltage sources on ...


CM3106,2.0A Source/Sink Bus Termination Regulator
The CM3106 is a sinking and sourcing Regulator specif- ically designed for providing power
to DDR memory terminating resistors and companion chip set VTT power. The output voltage
accurately tracks VDDQ/2. The CM3106 can source and sink current up to ...


CMPWR330,400mA SmartOR� Dual Regulator With VAUX Switch
The CMPWR330 is a dual input Regulator with a fully integrated VAUX switch capable of
delivering up to 400mA continuously at 3.3V. The input is taken from three independent voltage
sources on a prioritized basis. Power is always taken in priority using ...


AMS500,LOW COST 500mA REGULATOR
The AMS500 series consists of positive fixed and adjustable voltage regulators ideally suited
for use in battery-powered systems. These devices feature very low quiescent current of 0.8mA or less
when supplying 50mA loads. This unique characteristic and ...


L4904A,DUAL 5V REGULATOR WITH RESET
DUAL 5V Regulator WITH RESET L4904A ...


LT1020,Micropower Regulator And Comparator
The LT1020 is a combination micropower positive regu- lator and free collector comparator
on a single monolithic chip. With only 40A supply current, the LT1020 can supply over 125mA of
output current. Input voltage range is from 4.5V to 36V and dropout ...


KA350,3-Terminal 3A Positive Adjustable Voltage Regulator
The KA350 is an adjustable 3-terminal positive voltage Regulator capable of supplying in
excess of 3.0 A over an output voltage range of 1.2V to 33 V ...


IRVR101,Lin Controlled Alternator Voltage Regulator
The IRVR101 is an integral alternator voltage Regulator that allows for external control of
the setpoint voltage in an automotive charging system where optimized alternator output control is
desired. The setpoint control is achieved using the Local ...








SVR1033E,Svr1033n Negative Adjustable Linear Voltage Regulator - Solid States
Devices, Inc
Svr1033n Negative Adjustable Linear Voltage Regulator - Solid States Devices, Inc
SVR1033E ...
SVR1038B,10 Amps Adjustable Linear Voltage Regulator - Solid States Devices, Inc
10 Amps Adjustable Linear Voltage Regulator - Solid States Devices, Inc SVR1038B ...
SVR1086-12M,Svr1086-2.85m 2.85 Thru 12volts Low Dropout Positive Linear Voltage
Regulator - Solid States Devices, Inc
Svr1086-2.85m 2.85 Thru 12volts Low Dropout Positive Linear Voltage Regulator - Solid
States Devices, Inc SVR1086-12M ...
OM7622NM,SURFACE MOUNT LOW DROPOUT POSITIVE ADJUSTABLE
REGULATORS
These three terminal positive adjustable voltage regulators in surface mount package are
designed to provide 7.5A, 5A, 3A, and 1.5A with higher efficiency than conventional voltage
regulators. The devices are designed to operate to 1 Volt input to output ...