Engr. Loreto O. Bagio
Address: 13569 Bromwich St., Arleta, California 91331
Contact No.: (818)8998212 / (818)2078783
E-mail: bagselite@yahoo.com
Applying for : Electronics/Biomedical/Electrical Engineer,
Maintenance/Instrumentation Engineer, Electrician/Electronic
Technician for Offshore or Marine Vessels,
CAREER SUMMARY
A licensed Electronics and Communications Engineer with more than 19 years in the
field of Electronics encompassing the sectors of Process Manufacturing,
Maintenance, Operations, Designs, Marketing, Construction, Education, Biomedical,
Offshore and Marine Services. Very much knowledgeable and experienced as well in
computers, instrumentations, electromechanical systems and controls. Around eight
years working overseas (mainly Middle East but has worked in Japan, the
Netherlands and Central Asia as well).
WORK EXPERIENCES
King Fahd Medical City (through Iman Co. of Riyadh, Saudi Arabia)
Biomedical Engineer
Sept. 11 2009 to August 3, 2010
JOB DESCRIPTIONS
Corrective and Preventive maintenance of hospital laboratory equipments. Setup of new
equipments and improvement of existing systems. Training and education of end-users
regarding operations and possible repair of machines in case they breakdown. Coordinate
with vendors and suppliers regarding equipment issues.
VROON B.V. (based in the Netherlands)
Livestock Ship Electrician
April 21, 2009 to June 24, 2009
JOB DESCRIPTIONS
- Handled all kinds of electrical as well as many mechanical equipments
onboard.
- daily monitoring of all critical electrical equipments onboard the livestock ship
(exhaust and supply blowers, engine controls, navigational controls and lightings,
batteries and emergency power supplies, HVAC, reefers, emergency, fire alarms
and safety systems, , thrusters, cooling and fresh water pumps, fuel pumps,
instrumentations, electrically controlled valves, pneumatic/hydraulic controls,
motors and motor controls, winches etc.
- repair and troubleshooting of those equipments in case of breakdown
- the improvement of ship electrical systems.
- handled satellite system, audio-visual system, burners, boilers, laundry
equipments of the ship.
EIDE MARINE SERVICES
Tugboat Electrician
September 12, 2008 to Feb. 9, 2009
JOB DESCRIPTIONS
- Handled all kinds of electrical as well as some mechanical equipments onboard.
- daily monitoring of all critical electrical equipments (engine controls,
navigational controls and lightings, HVAC, reefers, emergency, fire alarms and
safety systems, tugging and anchor handling controls, thrusters, cooling and
fresh water pumps, fuel pumps, instrumentations, electrically controlled valves,
pneumatic/hydraulic controls, motors and motor controls, winches etc.
- repair and troubleshooting of those equipments in case of breakdown
- the improvement of ship electrical systems, the synchronization of generators.
-handled satellite system, audio-visual system, burners, boilers, laundry
equipments of the ships.
MCDERMOTT CASPIAN CONTRACTORS, INC (Azerbaijan)
Automatic Welding Technician
April 13, 2008 to May 28, 2008
JOB DESCRIPTIONS
-Automatic Welding System (specifically Vermaat Technics’) line maintenance for
a pipe laying barge Israfil Huseynov which did the Mcdermott pipelaying project
for Lukoil company of Russia in the Northern Caspian Sea.
-setup of automatic welding machines (their electrical, pneumatic, argon and
electronics controls, their welding wires etc.)
- line monitoring during welding operations
- assisting welders in case the welding bug/band broke or malfunctioned, greasing
of the contacts between bug and guide.
- Repair and troubleshooting of the bug, the bug control cabinet, the remote
controller, various cables, cards etc. when they break.
VERMAAT TECHNICS INC. (The Netherlands)
Automatic Welding Equipment Technician
September 18, 2007 to Dec. 9, 2007
JOB DESCRIPTIONS
-The first of three modules of On the Job Training for Vermaat Technics’
Veraweld Automatic Dual-torch welding equipment.
-Training includes familiarization, assembly, operation and troubleshooting.
KING ABDUL AZIZ UNIVERSITY (Saudi Arabia)
Biomedical Instruments Engineer/Electronics Equipment Maintenance Engineer
May 27, 2001 to June 20, 2007
JOB DESCRIPTIONS
- Responsible for the maintenance and repair of various University equipments
mainly on its electronics side.
- Equipments include medical instruments such as centrifuges, autoclaves,
sterilizers, digital microscopes, pH meters, digital weight scales, chillers, heaters,
incubators, water baths, some specialized diagnostic equipments,
Spectrophotometers, mixers, stirrers, IR and UV lighting systems etc.
- testers, audio-visual machines, Computers(both softwares & hardwares),
laboratory equipments, oscilloscopes, aerials/transmitters, power supplies,
microscopes, space telescopes, transducers and sensors, electronic controls for
such utilities as generators, HVAC, fire alarms, etc
- CCTVs, LCD projectors, surveillance cameras, BMS, Access controls, fault signaling
system
PULSE PHILIPPINES, INC.
Equipment Engineer
Dec. 27, 1999 to Dec. 31, 2000
JOB DESCRIPTIONS
- Responsible for the Line Maintenance of various production equipments
- Evaluates machine performance and daily downtimes.
- Makes corrective actions on machine faults.
- Schedules preventive periodic, predictive machine maintenance.
MATSUSHITA COMMUNICATIONS AND INDUSTRIAL CORP.
Production Engineer
August 1, 1997 to Dec. 19, 1999
JOB DESCRIPTIONS
-Responsible for the introduction of new machineries, jigs and better production
methods for increasing efficiency and quality of production.
- Makes study on better process flows and movements through analysis and
constant redesign of specific production line or point.
- Makes budget regarding Investments and Manufacturing Overhead, specifically,
repair, maintenance and calibration of equipments.
- Supervises various Line Improvement Projects.
- Interfaces with suppliers and contractors regarding such projects.
INTERCONGLOMERATES INC.
Sales Engineer
February, 1995 to July 31, 1997
JOB DESCRIPTIONS
In charged with the marketing and selling of the company’s product lines and
services.. Interfaces with customers and possible clients for their factory systems’
needs. See to it that overall company objectives are met. Our product line includes
pumps and factory instrumentations. We also did electrical and controls
contracting in which in a particular large-scale project I got involved in winning
and commissioning.
PHILIPPINE IRIS Co. Inc.
Electroplating/ Waste Water Treatment Technician
February, 1993 to February, 1995
JOB DESCRIPTIONS
- In charged with the operation and maintenance of the sequentially controlled
electroplating equipments as well as the waste water treatment of PICI.
- Troubleshoots electronics and mechanical failures.
TECHNICAL SKILLS :
Operation and maintenance of various Electronic Test Equipments
Can troubleshoot electronics, instruments, computers, electrical and mechanical
failures
Knowledge of AC/DC Motors, Milling, Grinding, Lathe, CNC lathe etc.
Knowledge of Hydraulics and Pneumatics
Computer know-how: Windows (Word,Excel, Powerpoint etc.) Visio, some CAD
languages,Industrial Automation Softwares, Ladder-Logic Programming,
troubleshooting at microprocessor level, understanding of several Assembly
Languages and some other high and low-level programming languages (HTML,CSS,
C++, Java….), Internet/Networking (TCP/IP). Computer Hardware Assembly, Design
and Troubleshooting.
Knowledge of Generators, Boilers, Chillers, and Compressors
Knowledge of Waste Water Treatment Systems
Knowledge of Programmable Controllers and some Communications Equipment
Marketing and Selling skills
Supervisory, Design and Research skills
TRAININGS and SEMINARS ATTENDED:
- Basic Offshore Safety Induction and Emergency Training
- Basic Safety Training with PSSR
- Proficiency in Safety Craft and Rescue Boat/Ship Security Awareness
- Semiconductor Line Maintenance Training (SEIFI)
- Management /Corporate Trainings (various companies)
- First Aid/Environmental Management Seminars
MAJOR/CURRENT INTERESTS/HOBBIES:
- Electronics, Computers, Power and Automation Engineering
- Home, Factory, Environmental/Land Improvements
- Music, History, Anthropology, Culture, Astronomy
PERSONAL INFORMATION
Date of Birth
: July 24, 1969
Place of Birth
: Manila
Age
: 41 yrs. old
Civil Status
: Married
Nationality
: Filipino
Languages spoken
: Pilipino, English, a little Arabic, a little Japanese,
several other Philippine languages (Bicol, Bisaya, Ilocano etc.)
Religion
: Roman Catholic
Height
: 5’ 2”
Weight
: 145 lbs. (65 kg)
Passport No (Philippine) : XX4428006
EDUCATIONAL ATTAINMENT
COLLEGE
University Of Santo. Tomas, Manila
Bachelor of Science in Electronics and Communications Engineering
Date Graduated: October 16,1990
Honors :
Knights of Columbus Scholar
June 1985 - October 1988
Extra-Curricular Activities :
-11th UST – Eng’g General Information Quiz Contest Champion
-Team Captain of the Engineering Pautakan Quiz Team
-1990 Champion Team of the UST – wide, Varsitarian sponsored Pautakan
Quiz Contest
HIGH SCHOOL :
Torres High School, Tondo, Manila
Date Graduated: March 21,1985
Honors : First Honorable Mention (4th yr. High school)
First Honor (3rd yr. High school)
ELEMENTARY :
Panghulo Elementary School – I, Panghulo, Malabon
Date Graduated: March 30,1981
Honors: First Honorable Mentions, Grades 5-6
Second Honor, Grades 1-4
GOVERNMENT EXAMINATIONS TAKEN :
ECE Board Exam
Rating : 81.05%
Date Taken: April 6-7, 1991
ECE License No. 0007144
REFERENCES : Available upon request