1 - Universiti Teknologi Malaysia

Abbou, R. (1988). “Hazardous Waste; Detection, Control, Treatment, Part A.”
Proceedings of the World Conference on Hazardous Waste, Hungary, 1987.:
Abdullah Mohamad Said (2001). “Penilaian Kesan Alam Sekitar. Prinsip dan
Amalan.” Universiti Teknologi MARA: Pusat Penerbitan Universiti
Alfred Ang (1999). “Scheduled Waste Management in Malaysia.” Seminar on
Scheduled Waste Management. Shah Alam, March 1999, Jointly Organised
by Department of Environment Wilayah Persekutuan and Department of
Environment Selangor.
Anil Markandya and Dale, N. (2001). ”Measuring Environmental Degradation,
Developing Pressure Indicators for Europe.” In Association with
EUROSTAT, The Statistical Office of The European Communities.: Edward
Canter, L.W., (1996). “Environmental Monitoring. In Environmental Impact
Assessment.”: Mc Graw Hill Inc.
Department of Environment, Ministry of Science, Technology and Environment
(1994), Guidelines For The Siting and Zoning of Industries: Department of
Environment, Malaysia.
Department of Environment, Ministry of Science, Technology and Environment
(1995).”Study on Toxic and Hazardous Waste Disposal Sites.” Voll. I: Main
Report.: Malaysian Government Publication.
Department of Environment, Malaysia (2000). “Training Seminar on Scheduled
Waste Management.” Jointly organized by Department of Environmental,
Center for Environmental Technologies and Danish Cooperation for
Environmental and Development (DANCED), Port Dickson, Negeri
Department of Environment, Ministry of Science, Technology and Environment
(2000). “A Handbook of Environmental Impact Assessment Guideline.”:
Department of Environment, Malaysia.
Department of Environment, Ministry of Science, Technology and Environment
(2000). “Environmental Impact Assessment Guideline For Toxic and
Hazardous Waste Treatment and Disposal Project.”: Department of
Environment, Malaysia.
Department of Environment, Ministry of Science, Technology and Environment
(2001), Malaysia Environmental Quality Report.: Department of
Environment, Malaysia.
Department of Environment, Malaysia (2002). “Training Course on Management and
Enforcement of Scheduled Waste, April 2002.”: Environmental Institute of
Malaysia (EIMAS).
Dupont, R., Theodore, L. and Kumar Ganesan (2000). “Pollution Prevention, The
Waste Management Approach for the 21st Century.” Florida: Lewis
Environmental Quality Act 1974 (Act 127) and Subsidiary Legislations (1998).:
International Law Book Services. ISBN 967-89-0956-1.
Excelbond Metal Recycling Industries Sdn Bhd. (1998). “Preliminary Environmental
Impact Report on A Proposed Establishment of Metal Recycling Factory on
Lot PLO 569, Jalan Keluli, Pasir Gudang Industrial Estate District of Johor
Bahru, Johor”.: Excelbond Metal Recycling Industries Sdn. Bhd.
Freeman, H.M. (1995). “Industrial Pollution Prevention Handbook.”: Mc Graw.Hill
Gilpin, A. (1995). “Environmental Impact Assessment Cutting Edge for the TwentyFirst Century.”: Cambridge University Press.
Goh, Kiam Seng (1990). “Toxic and Hazardous Waste Management in Malaysia,
Policies and Strategies, Hazardous Wastes Regulations and Management.”:
Ensearch, Malaysia.
Government Institute Inc. (1987). “Waste Minimization Manual.” United States of
America.: Government Institute Inc.
Government of Malaysia (1991). “Sixth Malaysia Plan,” 1991-1995.: Government
Government of Malaysia (2001). “Eight Malaysia Plan (2001-2005).: Government
Hajah Rosnani Ibarahim (2002). “National Policy on the Environment.” Impak Bil.
4/2002.: Department of Environment, Malaysia.
Harrop, D.O. and Nixon, J.A. (1999). “Environmental Assessment In Practice,
Routledge Environmental Management Series.” London: Routledge.
Ibrahim Shafii (1995). “Principles of the Basel Convention.” Paper presented at
Workshop on Management of Scheduled Waste in Malaysia, 25-26 Julai,
1995, Kuala Lumpur.: Department of Environment.
Jabatan Perancangan Bandar dan Desa (1998-2020). Laporan Pemeriksaan
Rancangan Struktur (Pengubahan) Daerah Johor Bahru.: Jabatan Perancangan
Bandar dan Desa, Malaysia.
JTS(M) Engineering Sdn. Bhd. (1994). “Preliminary Environmental Impact
Assessment Report on The Establishment of An Aluminium Recycling Plant
On PLO 227, Jalan Tembaga Dua, Kawasan Perindustrian Pasir Gudang,
Johor.: JTS Engineering Sdn. Bhd.
Kreith, F., (1994). “Handbook of Solid Waste Management.”: Mc Graw-Hill,U.S.A.
Kualiti Alam Sdn,Bhd (undated). Kualiti Alam Newsletter: Kualiti Alam Publication.
Kualiti Alam Sdn.bhd (undated). Kualiti Alam Factsheet: Kualiti Alam Publication.
La Grega, M.D., Buckingham, P.L., Evans, J.C. (2001). “Environmental Resources
Management, Hazardous Wastes Management.” 2nd Edition, Mc Graw Hill.
Larvik Pigment (Asia-Pacific) (1998). “Preliminary Environmental Impact
Assessment (EIA) for Proposed Zinc Waste Recycling, Pasir Gudang.”:
Larvik Pigment (Asia Pasifik) Sdn. Bhd.
Lee, Heng Keng (2003). “Updates on Scheduled Wastes Regulations and Benefits of
Waste Management for Industries.” Kuala Lumpur.: Federation of Malaysian
Lee, Heng Keng, Kalsom Abdul Ghani dan Norazian Abdul Hamid (2001), Polisi
Jabatan Allam Sekitar Terhadap Penempatan Kemudahan Aktiviti
Pergolahan,Pemerolehan kembali, Penstoran dan Pelupusan Buangan
Terjadual,IMPAK Buletin Bil 3/2001: Jabatan Alam Sekitar.
Lee, N. and George, C. (2000). “Environmental Assessment in Developing and
Transitional Countries, Principles, Methods and Practice.”: John Wiley and
Sons. Ltd.
Lieben, P. and Huisman, J.W. (1988). “Identifying, Classifying and Describing
Hazardous Wastes.”: World Conference on Hazardous Waste, Budapest,
Hungary, 1987 in Proceeding of theWorld Conference on Hazardous Wastes:
Lindgren, G.F. (1983). “Guide to Managing Industrial Hazardous Waste. U.S.A.:
Butterworth Publisher.
Mariana Md. Nor (1998). “Pengurusan Buangan Terjadual di Malaysia; Polisi,
Objektif dan Cabaran Masa Hadapan.”. Paper presented at Bengkel
Pengurusan Buangan Terjadual Jabatan Alam Sekitar Zon Selatan 17-18
November1998, Seri Malaysia, Mersing, Johor.: Jabatan Alam Sekitar.
Majlis Perbandaran Johor Bahru (1985). Pelan Struktur Majlis Perbandaran Johor
Bahru (Mukim Plentong dan Pasir Gudang) (1985).: Majlis Perbandaran
Johor Bahru, Majlis Daerah Johor Bahru Tengah, Pihak Berkuasa Tempatan
Pasir Gudang dan Pejabat Daerah Johor Bahru dengan kerjasama Jabatan
Perancangan Bandar dan Desa, Semenanjung Malaysia.
Majlis Daerah Pontian (1997). Rancangan Tempatan Bandar Pontian – Pekan Nenas
(1997-2010).: Majlis Daerah Pontian.
McLoughlin, J. and Belliger, E.G. (1993). “Environmental Pollution Control;An
Introduction to Principles and Practice of Administration”. International
Environmental Law and Policy Series: Graham and Trotman/Martinus
Ministry of Energy and Environment, Denmark (1977). “Statutory Order. No. 299,
30 April 1977 on Waste. Translation March 1998.
Morgan, R.K., (1998). “Environmental Impact Assessment, A Methodological
Perceptive”, London: Kluwer Academic Publisher.
Nemerow, N.L. (1995). “Zero Pollution Industry, Waste Minimization Through
Industrial Complexes.”: A Wiley- Inter Science Publication, John-Wiley and
Sons. Inc.
Norhayati Mohd. Yusof (2001). “Aspects of Waste Minimization Practices.” Impak.
Bil. 3/2001.: Department of Environment, Malaysia.
Ortolano, L., (1997). “Environmental Regulation and Impact Assessment.”: John
Wiley and Sons, Inc.
Peavy, H.S., Rowe, D.R. and Tchobanoglous, G. (1985). “Environmental
Engineering.” McGraw-Hill: International Editions.
Price, R.L., (1991). “Industrial Waste Minimization Manual for Small Quantity
Generators.”: Centre for Hazardous Materials Research, University of
Pittsburgh Trust.
Rosli Zul (1999). “Licence for the Recovery of Scheduled Waste, Compliance and
Amendment to the Conditions of Licence Renewal and Transfer of Licence.:
Department of Environment, Malaysia.
Rosli Zul and Azhan Daud (1998). “Approval and Licensing of Scheduled Wastes,
Prescribed Premises and the Roles of State Department of Environment.”
Scheduled Wastes Management Workshop for Department of Environment
Officers, South Zone State. Mersing, Johor.: Department of Environment,
Sadler, B. (1995). “The Evaluation of Assessment: Post-EIS Research and Process
Development. In Wathern, P. (ed) Environmental Impact Assessment: Theory
and Practice: Routledge.
Sadler, B. (1996). “Environmental Assessment in a Changing World: Evaluating
Practice to Improve Performance, International Study on the Effectiveness of
Environmental Assessment.”: Ministry of Supply and Services, Canada.
Sham Sani (1993). “Environment and Development in Malaysia: Changing Concerns
and Approaches.”: ISIS, Malaysia.
Sikdar, S.K. and Urmila Diwekar, (1991). “Tools and Methods for Pollution
Prevention.” NATO Science Series.: Kluwer Academic Publishers.
SMC Technology Sdn. Bhd. (1997).” Preliminary Environmental Impact Assessment
(EIA) Report for Spent Catalyst Recovery Plant, Pontian.”: SMC Technology
Sdn. Bhd.
Techno Indah Sdn. Bhd. (1994). “Environmental Impact Assessment for Sludge
Disposal at Malaysia Shipyard and Engineering Sdn. Bhd, Pasir Gudang,
Johor – Waste to Energy Project.”: Techno Indah Sdn. Bhd.
UNEP (1998). “ Report of the Fourth Meeting of the Conference on the Parties to the
Basel Convention, Kuching, 23-27 February, 1998.: UNEP/CHW.4/35/ 18,
Veen, F.V., (1988). “Definition of Hazardous Waste, The Issue of Western Europe.”
Hazardous Waste, Detection, Control, Treatment.” In Abbou, R., Amsterdam:
Elsevier Science Publishers.
Voorhees, J. and Woellner, R.A. (1998). “International Environmental Risk
Management, ISO 14000 and the System Approach.”: Lewis Publishers.
Ye Chiu Metal Smelting Sdn. Bhd. (1998). “Laporan Penilaian Kesan Kepada Alam
Sekeliling (EIA) bagi Cadangan Projek Kilang Pemerolehan Kembali
Aluminium Dros di PLO 472, Jalan Keluli, Kawasan Perindustrian Pasir
Gudang.”: Ye Chiu Metal Smelting Berhad.
Yozai(M) Sdn. Bhd. (2001). “Laporan Penilaian Kesan Kepada Alam Sekeliling
(EIA) bagi Cadangan Kemudahan Pemerolehan Kembali (Luar Tapak)
Pelarut Terpakai di PLO 593, Jalan Keluli 9, Kawasan Perindustrian MIEL,
Pasir Gudang.”: Yozai(M) Sdn. Bhd.