EI 2011 年收录我校教师论文情况
根据图书馆信息技术部初步检索，EI 2011 年(检索日期为 2011 年 12 月 14 日)收录广东
工业大学教师（仅第一作者所属单位为广东工业大学）的论文有 731 篇，具体如下：
1.Control strategy & calibration of fuel film compensation in the transient conditions
Peng, Meichun (Guangdong University of Technology, Guangzhou, 510006, China); Liang,
Xiaofeng; Xu, Chaomin; Lin, Yiqing Source: Advanced Materials Research, v 347-353, p
2593-2598, 2012, Renewable and Sustainable Energy
2.The 3D measuring method based on the color coding grating
Chen, Jian (Guangdong University of Technology, China); Li, Ketian; Ouyang, Xiangbo; Ding,
Shaohua Source: Applied Mechanics and Materials, v 109, p 385-389, 2012, Emerging Systems
for Materials, Mechanics and Manufacturing
3.The research of teaching reform on innovation experiment mode of civil "Whole process"
Guo, Yongchang (Guangdong University of Technology, Faculty of Civil and Transportation
Engineering, Guangzhou, 510006, China); Li, Lijuan; Xie, Zhihong; Zhu, Jiang; Xie, Jianhe
Source: Applied Mechanics and Materials, v 121-126, p 1143-1146, 2012, Frontiers of
Manufacturing and Design Science II
4.Preparation and application of high molecular weight coagulant made from ilmenite residues
Guo, Qingquan (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou University, 510006, China); Wang, Xiaofeng; Li, Lei; Li, Daguang; Zhu,
Wenxin Source: Applied Mechanics and Materials, v 121-126, p 1234-1238, 2012, Frontiers of
Manufacturing and Design Science II
5.Multi-objective optimal design of frame structures with group search optimizer
Liu, Feng (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Li, Lijuan; Yuan, Bing Source: Applied Mechanics and Materials, v
121-126, p 968-975, 2012, Frontiers of Manufacturing and Design Science II
6.Mechanical properties of modified polypropylene coarse fiber-reinforced, high-strength,
lightweight concrete
Zhang, Ronghui (Higher Education Mega Center, School of Civil and Communications
Engineering, Guangdong University of Technology, Panyu District, Guangzhou 51006, China); Li,
Jian Source: Advanced Materials Research, v 374-377, p 1499-1506, 2012, Sustainable
Development of Urban Environment and Building Material
7.Characterization of Cr-α-Al2O3 composite coatings electrodeposited from Cr(III) plating bath
Sun, Xin (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); He, Xiangzhu; Wang, Yongxiu; Fu,
Zhihong Source: Applied Mechanics and Materials, v 121-126, p 60-64, 2012, Frontiers of
Manufacturing and Design Science II
8.Investigation into the electromagnetic interference shielding effectiveness of silicon rubber filled
with carbon fiber
Hu, Yongjun (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Haiyan; Xiao, Xiaoting; Li, Feng; Cheng, Xiaoling; Hu, Guanghui Source:
Applied Mechanics and Materials, v 110-116, p 1392-1396, 2012, Mechanical and Aerospace
Engineering
9.A study on planarization grinding process based on the cluster magnetorheological effect
Yan, J.W. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Yan, Q.S.; Lu, J.B.; Kong, L.Y.; Wu, Z.C. Source: Materials Science Forum, v 697-698, p
44-48, 2012, Advances in Materials Manufacturing Science and Technology XIV
10.Key factors for the dynamic-static drainage consolidation method
Zhang, Lijuan (Guangdong University of Technology, Guangzhou, China); Li, Zhangming; Tim
Law, K. Source: Applied Mechanics and Materials, v 105-107, p 827-831, 2012, Vibration,
Structural Engineering and Measurement I
11.Energy research and endogenous growth
Zuo, Hui (School of Economics and Commerce, Guangdong University of Technology,
Guangzhou City, China); Ai, Danxiang Source: Advanced Materials Research, v 347-353, p
2907-2912, 2012, Renewable and Sustainable Energy
12.Blue fluorescent quantum dots-based probe for detection of influenza b virus
Wen, Junlin (Department of Pharmaceutical Engineering, Faculty of Chemical Engineering and
Light Industry, Guangdong University of Technology, Guangzhou 510006, China); He, Daigui;
Zhao, Suqing Source: Advanced Materials Research, v 365, p 18-22, 2012, Future Materials
Engineering and Industry Application
13.A study of polyvinyl chloride modified by barium sulfate
Wu, Hao (Guangdong University of Technology, Guangzhou, Guangdong Province, China); Cao,
Youming Source: Applied Mechanics and Materials, v 117-119, p 1402-1405, 2012, Materials and
Computational Mechanics
14.Risk consequence assessment of existing bridges using fuzzy based analytic hierarchy process
Deng, Jun (Facculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Li, Jian; Fang, Xiaoyue Source: Advanced Materials
Research, v 374-377, p 2021-2024, 2012, Sustainable Development of Urban Environment and
Building Material
15.Preparation and antioxidant properties of collagen polypeptide from Navodon septentionalis
bone
Yang, Lu (Faculty of Light and Chemical, Guangdong University of Technology, Guangzhou,
Guangdong, 510000, China); Ding, Lijun Source: Advanced Materials Research, v 361-363, p
804-807, 2012, Natural Resources and Sustainable Development
16.Study on the solidification/stabilization treatment of tannery sludge
Tian, Yu (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou Guangdong 510006, China); Ning, Xunan; Liu, Jingyong; Zhou, Jianbo;
Yang, Zuoyi; Li, Lei Source: Advanced Materials Research, v 356-360, p 1951-1954, 2012,
Progress in Environmental Science and Engineering
17.Design for turntable of spray rack
Zhang, Weihao (Faculty of Electromechanical Engineering, Guangzhou Higher Education Mega
Center, Guangdong University of Technology, No. 100 Waihuan Xi Road, Panyu District,
Guangzhou, China); Li, Ketian Source: Applied Mechanics and Materials, v 120, p 269-274, 2012,
Product Design and Manufacture
18.An optimal process for ultrasonic amplitude transformer design with FEM
Liu, G.Y. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, Guangdong Province, China); Guo, Z.N.; Li, Y.B.; Wang, G.; Huang, Z.G. Source:
Advanced Materials Research, v 346, p 116-121, 2012, Sustainable Construction Materials
and Computer Engineering
19.Rubber modified asphalt mixture properties and mechanical testing
Zhang, Rong Hui (Faculty of Civil and Traffic Engineering, Guangdong University of Technology,
Guangzhou, Guangdong, 510006, China); Liu, Jia; Huang, Jian Chao; Fu, Yi Source: Applied
Mechanics and Materials, v 105-107, p 810-817, 2012, Vibration, Structural Engineering and
Measurement I
20.A
reddish
orange-emitting
stoichiometric
phosphor
K<inf>3</inf>Eu(PO
<inf>4</inf>)<inf>2</inf> for white light-emitting diodes
Ju, Guifang (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Waihuan Xi Road, No. 100, Guangzhou 510006, China); Hu, Yihua; Chen, Li; Wang,
Xiaojuan; Mu, Zhongfei; Wu, Haoyi; Kang, Fengwen Source: Optics and Laser Technology, v
44, n 1, p 39-42, February 2012
21.Investigation and implementation of environmental protection and energy saving
Du, Yi (Guangdong University of Technology, China); Chen, Qingxin; Chen, Jianwei Source:
Advanced Materials Research, v 347-353, p 3271-3274, 2012, Renewable and Sustainable
Energy
22.Multi-mode extension control of pump-control electro-hydraulic servo system based on PLC
Zheng, Hongbo (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); Sun, Yousong; Li, Mian; Xian, Canbiao Source: Applied Mechanics and
Materials, v 121-126, p 244-248, 2012, Frontiers of Manufacturing and Design Science II
23.The researches and analysis on lakes water quality of the Guangzhou Higher Education Mega
Center
Hu, Quan (School of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Wang, Zhihong; Guo, Yan; Gao, Dan Source: Advanced Materials
Research, v 347-353, p 2268-2272, 2012, Renewable and Sustainable Energy
24.Thermal and FTIR characterization of unsaturated polyester resin/epoxy resin composites
Liao, Zhengfu (Faculty of Materials and Energy, Guangdong University of Technology,
Guangdong Guangzhou, 510006, China); Xu, Dongying; Zhang, Fengjun; Li, Chong; Xiao,
Wuhua Source: Applied Mechanics and Materials, v 117-119, p 905-907, 2012, Materials
and Computational Mechanics
25.Theoretical study on axial capacity of CFRP reinforced self-stressing concrete filled steel tubes
Li, Hui (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Deng, Jun; Lin, Junhong Source: Applied Mechanics and Materials,
v 121-126, p 3025-3029, 2012, Frontiers of Manufacturing and Design Science II
26.Characteristics of extracellular polymeric substances (EPS) and enzymes during the
aerobic/anoxic digestion of sewage sludge after ultrasonic pretreatment
Zheng, Li (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Sun, Shuiyu; Xu, Yanbin; Liu, Baojian; Yao, Weiting;
Cai, Mingshan; Tong, Wenjin Source: Advanced Materials Research, v 347-353, p 2008-2014,
2012, Renewable and Sustainable Energy
27.Deacidification of paper in supercritical carbon dioxide (CO <inf>2</inf>SCF) solvent system
with magnesium acetate and calcium hydroxide
Wang, Yanjuan (Faculty of Light Industry and Chemical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Tan, Wei; Liu, Chunying; Fang, Yanxiong Source:
Advanced Materials Research, v 347-353, p 504-507, 2012, Renewable and Sustainable
Energy
28.Fatigue behavior of reinforced concrete beams strengthened with prestressed fiber reinforced
polymer
Xie, J.H. (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Higher Education Mega Center, 100 Waihuan Xi Road, Guangzhou 510006, China); Huang, P.Y.;
Guo, Y.C. Source: Construction and Building Materials, v 27, n 1, p 149-157, February 2012
29.Optimization for pipeline system of air-conditioner based on finite element simulation
Li, Suyang (Faculty of Electro-Mechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Guo, Jun; Zhang, Xiaowei; Tang, Wenyan Source: Applied
Mechanics and Materials, v 121-126, p 2151-2155, 2012, Frontiers of Manufacturing and
Design Science II
30.Testing and analysis of high-speed camera for pulse MIG/MAG welding droplet transition
Wen, Yuan Mei (South China University of Technology, Guangzhou 510641, China); Huang, Shi
Sheng; Liu, Gui Xiong Source: Applied Mechanics and Materials, v 103, p 134-137, 2012,
Advances in Precision Instrumentation and Measurement
31.Design of LED backlight module used for large-size TFT-LCD
Zhou, Jinyun (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Xu, Jisen; Lin, Qinghua; Pei, Wenyan Source: Applied
Mechanics and Materials, v 109, p 485-488, 2012, Emerging Systems for Materials,
Mechanics and Manufacturing
32.Indoor thermal environment studies and comparisons of representative residential buildings in
urban village of guangzhou during typical weather in summer
Li, Zhisheng (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Liao, Jiawen; Liu, Xuhong Source: Advanced Materials
Research, v 374-377, p 66-69, 2012, Sustainable Development of Urban Environment and
Building Material
33.A heuristics based on RA for two-stage flexible flow shop scheduling with head group
constraint
Li, Zhantao (Key Laboratory of Computer Integrated Manufacturing System of Guangdong
Province, Guangdong University of Technology, Guangzhou, Guangdong Province 510006,
China); Chen, Qingxin; Mao, Ning Source: Applied Mechanics and Materials, v 101-102, p
783-789, 2012, Advances in Engineering Design and Optimization II
34.Characteristics of chip formation in the micro-drilling of multi-material sheets
Zheng, Lijuan (Guangdong University of Technology, Guangzhou 510006, China); Wang,
Chengyong; Yang, Lipeng; Song, Yuexian; Fu, Lianyu Source: International Journal of Machine
Tools and Manufacture, v 52, n 1, p 40-49, January 2012
35.Effect of acid deposition on soil Ca²⁺ contents of two forest ecosystems in
Dinghushan Biosphere Reserve
Wu, Jianping (Facualty of Environmental Science and Technology, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Ying, Pan; Tan, Peiyuan; Liu, Tao Source:
Advanced Materials Research, v 356-360, p 2601-2605, 2012, Progress in Environmental
Science and Engineering
36.Facile synthesis of N-{2-[4-(2-pyrimidinyl)-1-piperazinyl]ethyl} adamantane-1-carboxamide
Su, Qiang (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 51006, China); Guo, Jianwei; Yang, Chufen; Cui, Yingde Source:
Applied Mechanics and Materials,
v 117-119, p 1319-1322,
2012,
Materials and
Computational Mechanics
37.Immunomodulatory and anticancer activities of phenolics from emblica fruit (Phyllanthus
emblica L.)
Liu, Xiaoli (Department of Food and Biology Technology, Faculty of Chemical Engineering and
Light Industry, Guangdong University of Technology, Guangzhou 510006, China); Zhao,
Mouming; Wu, Kegang; Chai, Xianghua; Yu, Hongpeng; Tao, Zhihua; Wang, Jinshui Source:
Food Chemistry, v 131, n 2, p 685-690, March 15, 2012
38.An investigation about solid equal channel angular extrusion on polypropylene/organic
montmorillonite composite
Li, Hong (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510090, China); Huang, Xun; Huang, Chengya; Zhao, Yaoming Source:
Journal of Applied Polymer Science, v 123, n 4, p 2222-2227, February 15, 2012
39.Gaussian kernel-based fuzzy inference systems for high dimensional regression
Cai, Qianfeng (Faculty of Applied Mathematics, Guangdong University of Technology, No. 100
Waihuan Xi Road, Guangzhou, China); Hao, Zhifeng; Yang, Xiaowei Source: Neurocomputing,
v 77, n 1, p 197-204, 01 February 2012
40.Research on the removal of algae by inorganic-organic compound modified bentonite
Nie, Jinxu (Department of Civil and Traffic Engineering, Guangdong University of Technology,
GDUT, Guangzhou, China); Liu, Mi Source: 2011 2nd International Conference on Mechanic
Automation and Control Engineering, MACE 2011 - Proceedings, p 6803-6806, 2011, 2011
2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 Proceedings
41.Study on micro-polluted raw water treatment by rectangular biological sedimentation tanks
Wang, Heping (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, China); Liu, Liang Source: 2011 2nd International Conference on
Mechanic Automation and Control Engineering, MACE 2011 - Proceedings, p 3519-3522, 2011,
2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE
2011 - Proceedings
42.Structural and electrical properties of Ta2O5 thin films prepared by photo-induced CVD
Liu, Jun (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Wei, Aixiang; Zhao, Xianghui; Zhang, Haiyan Source: Bulletin of Materials
Science, v 34, n 3, p 443-446, June 2011
43.Luminescence
investigation
of
Eu³⁺-Bi³⁺
co-doped
CaMoO<inf>4</inf> phosphor
Kang, Fengwen (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Wu, Haoyi; Ju, Guifang; Mu, Zhongfei; Li,
Nana Source: Journal of Rare Earths, v 29, n 9, p 837-842, September 2011
44.Study on treatment of printing and dyeing wastewater by magnetic seed coagulation - High
gradient magnetic separation
Chen, Wensong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, China); Lin, Huashi; Zhang, Shuo-Feng Source: Applied Mechanics and
Materials, v 71-78, p 2689-2694, 2011, Frontiers of Green Building, Materials and Civil
Engineering
45.Camera self-calibration method based on GA-PSO algorithm
Li, Jing (School of Automation, Guangdong University of Technology, Guangzhou, China); Yang,
Yimin; Fu, Genping Source: CCIS2011 - Proceedings: 2011 IEEE International Conference on
Cloud Computing and Intelligence Systems, p 149-152, 2011, CCIS2011 - Proceedings: 2011
IEEE International Conference on Cloud Computing and Intelligence Systems
46.Magnetic properties of NiFe<inf>2</inf>O<inf>4</inf> thin films grown on
La<inf>0.7</inf>Sr<inf>0.3</inf>MnO<inf>3</inf>-buffered Si substrate
Tong, J.J. (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou, Guangzhou Higher Education Mega Center, 510006, China); Liu, Q.X.;
Jiang, Y.P.; Tang, X.G.; Zhou, Y.C.; Chen, J. Source: Vacuum, v 86, n 3, p 340-343, October 8,
2011
47.Application of pile underpinning for strengthening design of Longgan bridge
Tan, Yiping (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Li, Jian; Zou, Jinhua; Jiang, Haibo Source: Advanced
Materials Research, v 163-167, p 3465-3473, 2011, Advances in Structures
48.Study on cell nucleation behavior of HDPE-wood composites/supercritical CO<inf>2</inf>
solution based on rheological properties
Zhang, Jingjing (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Rizvi, Ghaus M.; Park, Chul B.; Hasan, Mohammad M. Source:
Journal of Materials Science, v 46, n 11, p 3777-3784, June 2011
49.Synthesis and characterization of 3Y-TZP powders by stirring ball milling
Li, Da Guang (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Wu, Zhi; Pan, Chun Yang; Fu, Wei Qin;
Wang, Qiu Hong Source: Advanced Materials Research, v 239-242, p 2790-2794, 2011,
Advanced Materials
50.Modified wavelet based morphological correlation for rotation-invariant recognition
Wang, Qu (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Chen, Li; Zhou, Jinyun; Lin, Qinghua Source: Optics
and Laser Technology, v 43, n 8, p 1504-1512, November 2011
51.Reduction of supercooling of water by TiO<inf>2</inf> nanoparticles as nucleating agent
Mo, Song Ping (Faculty of Material and Energy, Guangdong University of Technology, No. 100
Waihuan Xi Road, Guangzhou, 510006, China); Chen, Ying; Jia, Li Si; Li, Xing; Luo, Xiang Long
Source: Advanced Materials Research, v 236-238, p 1935-1938, 2011, Application of
Chemical Engineering
52.Flow dynamic simulation of micro abrasive water jet
Fan, Jingming (School of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Fan, Changming; Wang, Jun Source: Diffusion and Defect Data Pt.B:
Solid State Phenomena, v 175, p 171-176, 2011, Application of Diamond and Related
Materials
53.Event-triggered time synchronization algorithm in Medium and High Rate WSN
Wang, Yuechao (Faculty of Automation, Guangdong University of Technology, 729 East
Dongfeng Road, Guangzhou, 510006, China); Cheng, Lianglun Source: Applied Mechanics and
Materials, v 65, p 307-310, 2011, Mechatronic Systems and Automation Systems, MSAS
2011
54.Advanced Materials Research: Preface
Li, Lijuan (Guangdong University of Technology, China) Source: Advanced Materials Research,
v 163-167, 2011, Advances in Structures
55.Effect of crack on interfacial stresses of RC beam strengthened with CFRP
Guo, Yongchang (Guangdong University of Technology, Faculty of Civil and Transportation
Engineering, Guangzhou, China); Huang, Hanlin; Li, Lijuan; Deng, Jun; Zhong, Genquan Source:
Key Engineering Materials, v 462-463, p 559-562, 2011, Fracture and Strength of Solids VII
56.Influences of strain rates on the superplastic deformation behavior in
(Zr<inf>72</inf>Cu<inf>16.5</inf> Ni<inf>11.5</inf>)<inf>90</inf>Al<inf>10</inf> bulk
amorphous alloy
Tao, Ping-Jun (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Yang, Yuan-Zheng; Bai, Xiao-Jun Source: Gongneng Cailiao/Journal
of Functional Materials, v 42, n 1, p 10-13, January 2011
57.Synthesis and characterization of PMMA-b-PHEMA by atom transfer radical polymerization
Su, Yongfeng (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Yi, Guobin; Lin, Wenjing; Hu, Weitao; Chen, Chao
Source: Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, v
27, n 5, p 13-16, May 2011
58.Researching on the adsorption of protein on gold nanoparticles
Yuan, Juan (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guang Zhou, 510006, China); Guo, Qing Quan; He, Xiang Zhu; Liu, Yan Ping
Source: Advanced Materials Research, v 194-196, p 462-466, 2011, Advanced Engineering
Materials
59.Higher-order Takagi-Sugeno fuzzy model based on kernel mapping
Cai, Qian-Feng (Faculty of Applied Mathematics, Guangdong University of Technology,
Guangzhou Guangdong 510090, China); Hao, Zhi-Feng; Yang, Xiao-Wei Source: Kongzhi Lilun
Yu Yingyong/Control Theory and Applications, v 28, n 5, p 681-687, May 2011
60.Networked optimal predictive state estimation
Tang, Bin (Faculty of Automation, Guangdong University of Technology, Guangzhou Guangdong
510006, China); Zeng, Qi-Jie; Zhang, Yun Source: Kongzhi Lilun Yu Yingyong/Control Theory
and Applications, v 28, n 5, p 727-734, May 2011
61.Investigation of the trap state of Sr<inf>2</inf>MgSi<inf>2</inf>O <inf>7</inf>:
Eu²⁺, Dy³⁺ phosphor and decay process
Wu, Haoyi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Waihuan Xi Road No.100, Guangzhou 510006, China); Hu, Yihua; Wang, Xiaojuan
Source: Radiation Measurements, v 46, n 6-7, p 591-594, June-July 2011
62.PID control design for a class of second-order nonlinear systems based on extended
Takagi-Sugeno fuzzy models
Hu, Jun (Faculty of Automation, Guangdong University of Technology, Guangzhou, 510006,
China); Wang, Yin-He; Cui, Yue-Yuan; Zhang, Yun Source: Proceedings of the 2011 Chinese
Control and Decision Conference, CCDC 2011, p 1566-1571, 2011, Proceedings of the 2011
Chinese Control and Decision Conference, CCDC 2011
63.Tunable
luminescent
properties
by
adjusting
the
Sr/Ba
ratio
in
Sr
<inf>1.97-x</inf>Ba<inf>x</inf>MgSi<inf>2</inf>O<inf>7</inf>:Eu
²⁺<inf>0.01</inf>, Dy³⁺<inf>0.02</inf> phosphors
Wu, Haoyi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Zeng, Bodai; Mou, Zhongfei; Deng, Liuyong
Source: Journal of Physics and Chemistry of Solids, v 72, n 11, p 1284-1289, November 2011
64.Performance of rubberized high strength concrete after fire
Liu, Feng (Guangdong University of Technology, Guangzhou, 510006, China); Chen, Guixuan; Li,
Lijuan Source: Advanced Materials Research, v 163-167, p 1403-1408, 2011, Advances in
Structures
65.Design formulae of unsymmetrical double-gap output cavities of klystrons
Fu-Min, Lin (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, GuangZhou 510006, China); Hai-Xu, Liu Source: International Journal of Electronics,
v 98, n 5, p 617-630, May 2011
66.Determination and distribution of heavy metals in the municipal waste incinerator slags from
Guangdong Province
Liu, Jingyong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangdong Guangzhou, 510006, China); Sun, Shuiyu; Zhang, Rongxue; Zhong,
Sheng Source: Applied Mechanics and Materials, v 55-57, p 229-232, 2011, Recent Trends
in Materials and Mechanical Engineering Materials, Mechatronics and Automation
67.A controlling method for realizing chaotic synchronization and generating a special multi-wing
attractor
Xi, Huiling (Guangdong University of Technology, College of Automation, Guangzhou, 510006,
China); Yu, Simin Source: 2011 International Conference on Electric Information and Control
Engineering, ICEICE 2011 - Proceedings, p 1911-1916, 2011, 2011 International Conference
on Electric Information and Control Engineering, ICEICE 2011 - Proceedings
68.Raman analysis of the silicon wafer scratched by single point diamond
Chen, Zhuo (Guangdong University of Technology, Guangzhou, China); Wei, Xin; Xie, Xiaozhu;
Ren, Qinglei Source: Diffusion and Defect Data Pt.B: Solid State Phenomena, v 175, p 82-86,
2011, Application of Diamond and Related Materials
69.(2D)²PCA plus (2D)²LDA: A new feature extraction for face
recognition
Huang, Guohong (Faculty of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China) Source: Proceedings of SPIE - The International Society for Optical
Engineering, v 8009, 2011, Third International Conference on Digital Image Processing,
ICDIP 2011
70.Preparation of poly[poly(ethylene glycol) diacrylate] microspheres by dispersion
polymerization in polysaccharide solution
Tan, Guo-Xin (Institute of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Liao, Jing-Wen; Ning, Cheng-Yun; Zhang, Lin Source:
Gongneng Cailiao/Journal of Functional Materials, v 42, SUPPL. JUNE, p 398-400+404, June
2011
71.Study on compound machining of polyurethane polishing pad and cluster abrasive brush based
on MR effect
Li, M. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Yan, Q.S.; Lu, J.B.; Chai, J.F. Source: Key Engineering Materials, v
487, p 238-242, 2011, Advances in Grinding and Abrasive Technology XVI
72.Digital lensless fourier holography with optical fiber and reduction of speckle noise
Ma, Xiao (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Chen, Li; Lin, Qinghua; Xu, Huankun; Lei, Sha; Liu,
Feng Source: Advanced Materials Research, v 317-319, p 2152-2156, 2011, Equipment
Manufacturing Technology and Automation
73.Research on kinematics simulation and analysis of 6 revolute joint serial industrial robot
Li, Ke (Mechatronics Faculty, Guangdong University of Technology, Guangzhou, 510006, China);
Li, Duanneng; Kong, Linglin Source: Advanced Materials Research, v 308-310, p 2074-2077,
2011, Advanced Design Technology
74.Product's optimum design based on the combination of reverse engineering and finite element
analysis
Li, Suyang (Faculty of Electro-mechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Cheng, Siyuan; Qiu, Canhua Source: Key Engineering Materials, v 467-469,
p 335-338, 2011, Materials, Mechatronics and Automation
75.A fast detection and compensation of microscope defocus method based on laser triangulation
method on TFT-LCD inspection
Fan, Fuming (Faculty of Automation, Guangdong University of Technology, Guangzhou,
Guangdong 510006, China); Cheng, Lianglun Source: Zhongguo Jiguang/Chinese Journal of
Lasers, v 38, n 2, February 2011
76.Formation and magnetic properties of CuTiZrCo bulk metallic glass
Qiu, Jun-Hua (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Chen, Xian-Chao; Li, Wen-Tao; Su, Jia-Jia; Xie, Zhi-Wei; Yang, Yuan-Zheng
Source: Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, v 21, n 2, p
399-404, February 2011
77.Preparation and process optimization of LLDPE/EVA/modified nano-ZnO composites
Liu, Jia (Faculty of Materials and Energ, Guangdong University of Technology, 729 East
Dongfeng Road, Guangzhou, 510006, China); Li, Shun Xiang Source: Advanced Materials
Research, v 236-238, p 1803-1806, 2011, Application of Chemical Engineering
78.Module partition and application for Printed Circuit Board high speed drilling machine
Tang, H.Q. (Guangdong University of Technology, Guangzhou, China); Wang, C.Y.; Wang, B.; Su,
F.; Ma, P.; Song, Y.X. Source: Advanced Materials Research, v 188, p 104-109, 2011, High
Speed Machining
79.Research on optimal operations of distribution system with accommodation water discharge of
small hydropower station and capacitor-switching
Peng, Xian-Gang (Department of Automation, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Cong-Hui; Wang, Xing-Hua; Liu, Yi; Yu, Xin-Mei Source: Dianli Xitong
Baohu yu Kongzhi/Power System Protection and Control, v 39, n 4, p 58-61+67, February 16,
2011
80.The behavior and removal method of phosphorus in constructed wetland
Luo, Jianzhong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Wen, Zhuang; Xiong, Guoxiang; Luo, Shuai Source:
2011 International Conference on Electric Technology and Civil Engineering, ICETCE 2011 Proceedings, p 1658-1661, 2011, 2011 International Conference on Electric Technology and
Civil Engineering, ICETCE 2011 - Proceedings
81.An ensemble data mining and FLANN combining short-term load forecasting system for
abnormal days
Li, Ming (College of Automation, Guangdong University of Technology, Guangzhou, China); Gao,
Junli Source: Journal of Software, v 6, n 6, p 961-968, June 2011
82.Determination of metals in waste bag filter of steel works by microwave digestion-flame
atomic absorption spectrometry
Ning, Xun-An (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhou, Yun; Liu, Jing-Yong; Wang, Jiang-Hui; Li, Lei;
Ma, Xiao-Guo Source: Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis,
v 31, n 9, p 2565-2568, September 2011
83.Simulation of spindle rotation error with three-point method based on Matlab
Huang, Zouya (Guangdong University of Technology, Guangzhou, Guangdong, 510006, China);
Gao, Weiqiang; Yan, Qiusheng; Huang, Jianjian; Qing, Chaoting Source: Advanced Materials
Research, v 156-157, p 1069-1073, 2011, Advanced Manufacturing Technology
84.Numerical simulation of air flow properties around high speed train in very Long Tunnel
Zhu, Yanfeng (Guangdong University of Technology, Guangzhou, China); Liu, Xiangyun; Cui,
Zhanlin Source: Journal of Computers, v 6, n 3, p 578-584, 2011
85.An effective method for improving the lifetime of double acting vane pump
Chen, Feiyan (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Hu, Guoqing; Wu, Baihai Source: Proceedings - 3rd International
Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2011, v 1, p
391-394, 2011, Proceedings - 3rd International Conference on Measuring Technology and
Mechatronics Automation, ICMTMA 2011
86.Influence of plasma modification conditions on hydrophilicity and surface energy of
PEGDA/HEMA hydrogel
Tan, Guoxin (College of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Chen, Rong; Ning, Chengyun; Zheng, Huade; Tian, Ye;
Ruan, Xiongjie; Liao, Jingwen Source: Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric
Materials Science and Engineering, v 27, n 3, p 55-57, March 2011
87.Finite element analysis and calculation of load capacity on aerostatic thrust bearing
Shu, P.C. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Xiao, S.H.; Wu, H. Source: Advanced Materials Research, v 188, p 566-571,
2011, High Speed Machining
88.Synthesis and characterizaion of adamantane-containing quaternary ammonium salts
Guo, Jianwei (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Guan, Nianyun; Liu, Sa; Yang, Chufen; Zhu, Lejie
Source: Advanced Materials Research, v 233-235, p 238-241, 2011, Fundamental of
Chemical Engineering
89.The influence of stirring time on mechanical properties of Sn-58Bi alloy treated in the
semi-solid state by mechanical stirring process
Hu, Yongjun (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Lin, Yong; He, Jiannan; Cheng, Xiaoling; Lin, Feng; Xiao, Xiaoting; He,
Yuanchuan; Zhong, Binqiang; Zheng, Chuchun; Zheng, Yu Chuan; Wu, Yuchi Source: Key
Engineering Materials, v 480-481, p 1521-1524, 2011, Materials Engineering for Advanced
Technologies
90.Catalytic combustion of toluene on Pd-based monolithic catalyst without coating
Li, Yong-Feng (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Liu, Zu-Chao; Mai, Rong-Jian; Yu, Lin; Yu, Qian Source:
Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology, v 39, n 9, p 712-716,
September 2011
91.Tongue-coating image segmentation based on combination of morphological gradient and
watershed algorithms
Zhang, L. (Computer Faculty, Guangdong University of Technology, Guangzhou 510006, China);
Qin, J.; Zeng, Yan Jun Source: Imaging Science Journal, v 59, n 6, p 311-316, November 2011
92.Modeling and simulation of hydraulic system of the beam part of the tile press based on
AMESim
Xiao, Tibing (Dept. of Mechanical and Electronic Eng, Guangdong University of Technology,
Guangzhou, China); Jiang, Xingping; Ling, Ling; Wu, Baihai Source: Proceedings of 2011
International Conference on Fluid Power and Mechatronics, FPM 2011, p 593-596, 2011,
Proceedings of 2011 International Conference on Fluid Power and Mechatronics, FPM 2011
93.Crystal structure and photoluminescence studies of ZnO nanocrystals doped with
Eu³⁺ ions
Huang, Fang-Ying (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Luo, Li; Dai, Qiang-Qin Source: Guang Pu Xue Yu
Guang Pu Fen Xi/Spectroscopy and Spectral Analysis, v 31, n 11, p 2978-2980, November
2011
94.PSS parameter tuning based on phase characteristics of site measurements
Mao, Xiaoming (Faculty of Automation, Guangdong University of Technology, Guangzhou
510006, China); Cai, Yongzhi; Zhao, Yong Source: Dianli Zidonghua Shebei/Electric Power
Automation Equipment, v 31, n 10, p 56-60, October 2011
95.A lightweight solution to educational log data mining
Liu, Kun (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Xing, Yan; Cai, Yan-Guang Source: Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal
of Central South University (Science and Technology), v 42, n SUPPL. 1, p 755-759,
September 2011
96.Heat dissipation composites prepared by carbon coated aluminum nanoparticles filled silicone
rubber
Lin, Jin (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Haiyan; Hong, Haoqun; Tu, Wenying Source: Fuhe Cailiao Xuebao/Acta
Materiae Compositae Sinica, v 28, n 4, p 46-51, August 2011
97.Numerical simulation &amp; experimental research of heat charging process of cylindrical
units with PCM of Al-Si alloy
Chen, Guansheng (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou, China); Zhang, Renyuan; Li, Feng; Li, Shidong; Zhang, Li Source: Advanced
Materials Research,
v 171-172, p 223-228,
2011,
Engineering Materials, Energy,
Management and Control
98.The use of ant colony model in the staff deployment problem
Zhang, Wan-Li (College of Management, Guangdong University of Technology, Guangdong
510520, China); Zhang, Bi-Xi; Qiu, Wen-Rong Source: Advanced Materials Research, v
317-319, p 1501-1506, 2011, Equipment Manufacturing Technology and Automation
99.Influence of annealing temperature on the antibacterial activities and photoactivity of N-doped
TiO<inf>2</inf> films by ion beam assistance
Cheng, Xiao Ling (Faculty of Chemical Engineering and Light Industry, Guangzhou Higher
Education Mega Center, Guangdong University of Technology, No. 100, Wai Huan West Road,
Pan Yu District, Guang Zhou, 510006, China); Hu, Yong Jun; Hu, She Jun; Yu, Lin; Xie, Guang
Rong Source: Advanced Materials Research, v 189-193, p 1258-1262, 2011, Manufacturing
Process Technology
100.Transverse ferromagnetic resonance of heisenberg ferromagnets with exchange anisotropy
Xiang, Ying (School of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Feng, Jun-Sheng; Luo, Xin; Chen, Yuan Source: IEEE Transactions
on Magnetics, v 47, n 6 PART 2, p 1653-1657, June 2011
101.Preparation and electrochemical performance of SnO<inf>2</inf>/graphite/ carbon nanotube
composite anode for lithium-ion batteries
Yang, Chengzhao (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou, 510006, China); Zhang, Guoqing; Zhang, Lei; Ma, Li Source: Advanced Materials
Research, v 150-151, p 1387-1390, 2011, Advances in Composites
102.Experimental investigation on themal responsive characteristics and shift operation of heat
pump
Chen, Ying (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Ding, Guangcheng; Yang, Min Source: Taiyangneng Xuebao/Acta Energiae
Solaris Sinica, v 32, n 2, p 257-261, February 2011
103.Locally linear embedding: A survey
Chen, Jing (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Liu, Yang Source: Artificial Intelligence Review, v 36,
n 1, p 29-48, June 2011
104.The setting method of project buffer in critical chain management of mould manufacturing
project based reworking
Hu, Changwei (Key Laboratory of Computer Integrated Manufacturing System of Guangdong
Province, Faculty of Electromechanical Engineering, Guangdong University of Technology, No.
100 Waihuanxi Road, Panyu District, Guangzhou 510006, China); Chen, Xindu; Wu, Lihua
Source: Advanced Materials Research,
v 317-319, p 418-422,
2011,
Equipment
Manufacturing Technology and Automation
105.The consumption and control of the real estate market based on dissipation structure theory
Wei-Ji, Zhou (School of Management, Guangdong University of Technology, Guangzhou, China);
Jing-Xian, Liu; Xue-Qiang, Li; Yang, Liu Source: 2011 International Conference on E-Business
and E-Government, ICEE2011 - Proceedings, p 3609-3612, 2011, 2011 International
Conference on E-Business and E-Government, ICEE2011 - Proceedings
106.Optimal design of spatial grid structure using group search optimization
Yuan, Bing (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Da Xue Cheng, Guangzhou, 510006, China); Ren, Fengming; Zhong, Genquan; Zhou,
Jing Source: Advanced Materials Research, v 243-249, p 6044-6048, 2011, Advances in
Civil Engineering and Architecture
107.Reliability prediction of wireless sensor network based on neural network
Sun, Xuan Dong (Faculty of Computer, Guangdong University of Technology, Guangdong,
510006, China); Wang, Xiao Jing Source: Advanced Materials Research, v 214, p 618-622,
2011, Advances in Key Engineering Materials
108.Microstructure and phase stability of sintered hydroxyapatite-zirconia composites
Cheng, Xiao Ling (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, No. 100, Wai Huan West Road, Guang Zhou, 510006, China); Hu, Yong Jun; Bai,
Xiao Jun; Yu, Lin; Chen, Jun Sheng; Lin, Le Jia Source: Advanced Materials Research, v
236-238, p 2848-2851, 2011, Application of Chemical Engineering
109.FPGA implementation of Laplacian of Gaussian edge detection algorithm
Wang, Feng (Faculty of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Wang, Gui Tang; Wang, Rui Huang; Huang, Xiao Wu Source:
Advanced Materials Research, v 282-283, p 157-160, 2011, Advanced Research on Material
Engineering, Chemistry, Bioinformatics, MECB 2011
110.Reactive scheduling algorithm for multiple mould and die projects based on optimized
resource ow constraints
Zhang, Sha-Qing (School of Electromechanical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Chen, Xin-Du; Chen, Qing-Xin; Chen, Xin Source:
Xitong Gongcheng Lilun yu Shijian/System Engineering Theory and Practice, v 31, n 8, p
1571-1580, August 2011
111.Interaction behavior modeling of advanced driving assistance systems by using Petri net
Wu, Naiqi (School of Mechatronics Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Chu, Feng; Mammar, Said; Zhou, Mengchu Source: 2011
International Conference on Networking, Sensing and Control, ICNSC 2011, p 145-150, 2011,
2011 International Conference on Networking, Sensing and Control, ICNSC 2011
112.Effect of Ni²⁺ on chromium electrodeposition in Cr(III) plating bath
He, Xiangzhu (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Zhou, Xinli; Zhang, Xiaowei Source:
Advanced Materials Research, v 150-151, p 1555-1559, 2011, Advances in Composites
113.The influence of process parameters on the branch height for air handling unit
Wen, Hua-Dian (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Xiao, Xiao-Ting; Tan, Li-Guang; Zhang, Kai; Chen, Ying Source:
Advanced Materials Research, v 314-316, p 759-762, 2011, Advanced Manufacturing
Technology
114.Election Campaign Optimization algorithm for design of pressure vessel
Zhang, Hong (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Lv, Wenge; Cheng, Siyuan; Luo, Shaoming; Zhang, Xiangwei Source: Advanced
Materials Research, v 308-310, p 15-20, 2011, Advanced Design Technology
115.Condition evaluation of existing long-span bridges using fuzzy based analytic hierarchy
process
Deng, Jun (Facculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Li, Jian; Fang, Xiaoyue Source: Advanced Materials
Research, v 163-167, p 3328-3331, 2011, Advances in Structures
116.Simulation on influence mechanism of environmental factors to producers' food security
behavior in supply chain
Chen, Yuan (School of Economics and Commerce, Guangdong University of Technology,
Guangzhou, 510520, China); Chen, Kanyu; Li, Yang Source: Proceedings - 2011 8th International
Conference on Fuzzy Systems and Knowledge Discovery, FSKD 2011, v 4, p 2104-2109, 2011,
Proceedings - 2011 8th International Conference on Fuzzy Systems and Knowledge Discovery,
FSKD 2011
117.Application of vibration test methods in cement-treated aggregate
Liu, Jia (Faculty of Civil and Traffic Engineering, Guangdong University of Technology,
Guangzhou, Guangdong, 510006, China); Zhang, Ronghui; Mai, Canqiang Source: Advanced
Materials Research, v 308-310, p 980-986, 2011, Advanced Design Technology
118.Synthesis and characterization of Se nanowires
Zhao, Miao (Faculty of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Yi, Shuang-Ping; Wang, Zhen-Hu Source: Gongneng
Cailiao/Journal of Functional Materials, v 42, n SUPPL. 1, p 54-57, February 2011
119.A novel design of 3-dB coupler with harmonics suppression using Powell's least square
method
Li, Rui (Faculty of Physics and Optoelectronic Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Kim, Dong Il; Wu, Duo-Long; Yang, Qiang Source: Microwave and
Optical Technology Letters, v 53, n 9, p 2164-2166, September 2011
120.Pinning effects on the dielectric and ferroelectric properties of Mn-doped
Ba(Zr<inf>0.06</inf>Ti<inf>0.94</inf>)O<inf>3</inf> ceramics
Kuang, S.J. (School of Physics and Optoelectric Engineering, Guangzhou Higher Education Mega
Center, Guangdong University of Technology, Guangzhou, 510006, China); Tang, X.G.; Wu, J.B.;
Jiang, Y.P.; Liu, Q.X. Source: Materials Science Forum, v 687, p 354-358, 2011, Functional
and Electronic Materials
121.Photoluminescence
characterization
of
Ca<inf>10</inf>Na(PO
<inf>4</inf>)<inf>7</inf>:Eu³⁺ red-emitting phosphor
Dou, Xihua (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, GuangDong, Guangzhou 510006, China); Zhao, Weiren; Song, Enhai; Zhou,
Guoxiong; Yi, Chunyu; Zhou, Mingkang Source: Spectrochimica Acta - Part A: Molecular and
Biomolecular Spectroscopy, v 78, n 2, p 821-825, February 2011
122.Study on machining process of lapping for BK7 glass
Wang, C.Y. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Luo, W.S.; He, C.H.; Song, Y.X. Source: Key Engineering Materials, v 487, p 257-262,
2011, Advances in Grinding and Abrasive Technology XVI
123.A lasso-based method for wavelet network construction
Zhang, Jun (College of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Wan, Xiangkui Source: Journal of Information and Computational
Science, v 8, n 9, p 1755-1760, September 2011
124.Preliminary study on prediction model of forming tubular bulge height for a thick-plate
Liu, Dan (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou,
Guangdong, 510006, China); Xiao, Xiaoting; Liao, Yijuan; Zhang, Zhengrong Source: Advanced
Materials Research, v 314-316, p 763-766, 2011, Advanced Manufacturing Technology
125.Approaches to the feather stain detection and segmentation
Ming, Junfeng (Faculty of Computer, Guangdong University of Technology, Guangzhou,
Guangdong, China); Wang, Renhuang; Tang, Suxiang; Liu, Hongjiang Source: Advanced
Materials Research, v 317-319, p 931-936, 2011, Equipment Manufacturing Technology and
Automation
126.A two-level theoretical model on digital divide in individual ecommerce utilization in China
Zhu, Shizhan (School of Management, Guangdong University of Technology, Guangzhou
510520, China) Source: 2011 IEEE 3rd International Conference on Communication Software and
Networks, ICCSN 2011, p 92-96, 2011, 2011 IEEE 3rd International Conference on
Communication Software and Networks, ICCSN 2011
127.Design of control and display system of infrared cooker based on TMP86FH09ANG and
CY8C21534
Wang, Yonghua (Faculty of Automation, Guangdong University of Technology, Guangzhou,
510006, China); Du, Jianhong; Yang, Jian Source: Advanced Materials Research, v 216, p 61-64,
2011, Optical, Electronic Materials and Applications
128.Generation of excellent self-similar pulses in a dispersion-decreasing fiber
Zhang, Qiaofen (Guangdong University of Technology, Guangzhou, Guangdong 510006, China);
Gao, Jian Source: Optik, v 122, n 19, p 1753-1756, October 2011
129.Experimental study on solidification behavior of carbon nanotube nanofluid
Mo, Songping (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); Chen, Ying; Yang, Jieying; Luo, Xianglong Source: Advanced Materials
Research, v 171-172, p 333-336, 2011, Engineering Materials, Energy, Management and
Control
130.Linear quadratic Gaussian optiaml controlled two-stage inverter for a high-frequency AC
distribution power system
Liu, Wei (Guangdong University of Technology, Guangzhou, 510006, China); Huang, Zhigang;
Guo, Zhongning Source: Advanced Materials Research, v 230-232, p 1287-1292, 2011,
Frontiers of Manufacturing Science and Measuring Technology
131.Saddle-point equilibrium of bilinear It&#244; stochastic differential games
Gao, Xiaoqiu (Guangdong University of Technology, Guangzhou, Guangdong 510520, China);
Zhang, Chengke; Zhu, Huainian Source: Communications in Computer and Information Science,
v 227 CCIS, n PART 4, p 368-373, 2011, Applied Informatics and Communication International Conference, ICAIC 2011, Proceedings
132.Source and destination antenna selection in MIMO relay systems
Zhang, Guangchi (Faculty of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Li, Guangping; Qin, Jiayin Source: 7th International Conference on
Wireless Communications, Networking and Mobile Computing, WiCOM 2011, 2011, 7th
International Conference on Wireless Communications, Networking and Mobile Computing,
WiCOM 2011
133.License plate location based on combinatorial feature
Zheng, Yan-Qing (Faculty of Computer, Guangdong University of Technology, Guangzhou,
China); Li, Dai-Ping; Zhang, Shu-Wen Source: 7th International Conference on Wireless
Communications, Networking and Mobile Computing, WiCOM 2011, 2011, 7th International
Conference on Wireless Communications, Networking and Mobile Computing, WiCOM 2011
134.Long-term capacity planning with multi-process routing for mould enterprise
Yu, A.L. (School of Mechanical and Electronic Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Chen, Q.X. Source: Proceedings of the 2011 2nd International
Conference on Digital Manufacturing and Automation, ICDMA 2011, p 705-709, 2011,
Proceedings of the 2011 2nd International Conference on Digital Manufacturing and Automation,
ICDMA 2011
135.Application of Kalman filter with colored noises to the experiment of seam tracking
Gao, Xiang-Dong (Faculty of Mechanical and Electrical Engineering, Guangdong University of
Technology, Guangzhou Guangdong 510006, China); Zhong, Xun-Gao; You, De-Yong; Katayama,
Seiji Source: Kongzhi Lilun Yu Yingyong/Control Theory and Applications, v 28, n 7, p 931-935,
July 2011
136.Fault diagnosis technology for power electronics rectifier based on wavelet packet
Hu, Qing (School of Information Engineering, GuangDong University of Technology, Guangzhou,
Guangdong, 510006, China); Wang, Rongjie; Lin, Lian-Shi Source: Advanced Materials Research,
v 317-319, p 1215-1218, 2011, Equipment Manufacturing Technology and Automation
137.Spatter feature recognition during high-power disk laser welding
You, Deyong (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Higher Education Mega Center, No. 100 West Waihuan Road, Panyu District, Guangzhou 510006,
China); Gao, Xiangdong; Katayama, Seiji Source: Advanced Materials Research, v 314-316, p
937-940, 2011, Advanced Manufacturing Technology
138.Review of techniques for the mass flow rate measurement of pneumatically conveyed solids
Zheng, Yingna (School of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Liu, Qiang Source: Measurement: Journal of the International
Measurement Confederation, v 44, n 4, p 589-604, May 2011
139.Study of adsorbent derived from sewage sludge incineration residue for the removal of
Ni²⁺ in wastewater
Liu, Jing Yong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangdong Guangzhou,510006, China); Ning, Xun An; Yang, Zuo Yi Source: Key
Engineering Materials, v 474-476, p 158-161, 2011, Advanced Materials and Computer
Science
140.Research on the evaluation and countermeasure to the situation of Dongguan's coordinating
development economy
Hongling, Lin (School of Management, Guangdong University of Technology, Chaozhou,
Guangdong, China); Haijiao, He; Zhifeng, He Source: 2011 International Conference on
E-Business and E-Government, ICEE2011 - Proceedings, p 3459-3463,
2011,
2011
International Conference on E-Business and E-Government, ICEE2011 - Proceedings
141.Catalytic combustion of toluene on Cu-Mn complex oxides prepared by urea-based
hydrothermal method
Yu, Qian (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Li, Jun; Cheng, Gao; Shen, Lisi; Wang,
Yunjia; Yu, Lin; Li, Yongfeng Source: Advanced Materials Research, v 311-313, p 432-435,
2011, Advanced Materials and Processes
142.Experimental study on the solar-earth source heat pump system and its underground heat
exchanger system
Wang, Chengyong (Faculty of Electromechanical Engineering, Guangdong University of
Technology, Guangzhou 510090, China); Chen, Bingwen; Chen, Wenming; Wang, Yansheng; Hu,
Yingning Source: Taiyangneng Xuebao/Acta Energiae Solaris Sinica, v 32, n 1, p 77-82,
January 2011
143.Effect of complex agents on the performance of electrodeposited Ni-graphite composites
He, Xiang Zhu (Faculty of chemical Engineering and Light Industry, Guangdong University of
Technology, No. 100 Waihuan Xi Road, Guangzhou, Guangdong, 510006, China); Zhang, Xiao
Wei; Zhou, Xin Li; Wang, Yong Xiu Source: Advanced Materials Research, v 239-242, p
2888-2894, 2011, Advanced Materials
144.Photoluminescence and thermoluminescence of Ce³ and Eu ² in
Ca<inf>2</inf>Al<inf>2</inf>SiO<inf>7</inf> matrix
Wu, Haoyi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Ju, Guifang; Chen, Li; Wang, Xiaojuan;
Yang, Zhongfu Source: Journal of Luminescence, v 131, n 12, p 2441-2445, December 2011
145.Ductility of concrete-filled steel box columns with binding bars subjected to axial
compression
Long, Yue-Ling (Department of Civil Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Cai, Jian Source: Advanced Materials Research, v 255-260, p
2584-2587, 2011, Advances in Civil Engineering
146.Non-isothermal
crystallization
behavior
in
Zr<inf>55</inf>Cu
<inf>30</inf>Ni<inf>5</inf>Al<inf>10</inf> bulk metallic glass
Tao, Pingjun (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou,
China); Yang, Yuanzheng; Bai, Xiaojun; Mu, Zhongxin; Li, Guoqing Source: Advanced Materials
Research, v 146-147, p 560-564, 2011, Advances in Superalloys
147.Preparation and characterization of APTES films on modification titanium by SAMs
Tan, Guoxin (Institute of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Zhang, Lin; Ning, Chengyun; Liu, Xujian; Liao,
Jingwen Source: Thin Solid Films, v 519, n 15, p 4997-5001, May 31, 2011
148.ESPI for the piezoelectric constant measurement
Xu, Huankun (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Chen, Li; Ma, Beihe; Ma, Xiao; Lei, Sha; Lin, Qinghua
Source: Advanced Materials Research, v 311-313, p 1314-1318, 2011, Advanced Materials
and Processes
149.Corroded behavior of 310S stainless steel in molten Al-Si eutectic alloy
Mao, Ling Bo (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou,
Guangdong 510090, China); Zhang, Ren Yuan; Li, Feng Source: Advanced Materials Research,
v 311-313, p 957-961, 2011, Advanced Materials and Processes
150.Energy recovery and recycle network optimization considering energy load variation for large
public buildings
Chen, Ying (School of Material and Energy, Guangdong University of Technology, Guangzhou,
510006, China); Lv, Feng; Luo, Xianglong Source: Proceedings - International Conference on
Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2011, p
194-197, 2011, Proceedings - International Conference on Computer Distributed Control and
Intelligent Environmental Monitoring, CDCIEM 2011
151.A novel service scheduling policy based on logical subnet partitioning in Bio-Grid
environments
Jiang, Wenchao (School of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Zhou, Yanhong; Jin, Hai; Baumgarten, Matthias Source: International
Journal of Grid and Utility Computing, v 2, n 2, p 85-97, June 2011
152.Analyses of pathological changes of Lingnan ancient stone bridges
Li, Xuhong (School of Art and Design, Guangdong University of Technology, Guangdong
510090, China) Source: Advanced Materials Research, v 168-170, p 99-105, 2011, Advances
in Building Materials
153.Modal analysis of externally pressurized air bearing workbench based on spring-mass system
method
Zhang, B. (Guangdong University of Technology, Guangzhou, Guangdong, China); Ma, P.; Huang,
J.J. Source: Advanced Materials Research, v 188, p 602-607, 2011, High Speed Machining
154.Friction and wear properties of W,Mo,Co alloyed layer on T8 steel by double-glow technique
Zhang, Yan Mei (Faculty of Materials and Energy, Guangdong University of Technology, No.100,
Wai Huan West Road, Guang Zhou, 510006, China); Jie, Xiao Hua; Li, Zhong Hou; Xu, Zhong
Source: Advanced Materials Research, v 189-193, p 1071-1074, 2011, Manufacturing
Process Technology
155.The comparative analysis about rotational error separation with three-point method and
approximate three-point method
Ping, Ma (Guangdong University of Technology, Guangzhou 510006, China); JianJian, Huang;
DuanNeng, Li Source: 2011 International Conference on Consumer Electronics, Communications
and Networks, CECNet 2011 - Proceedings, p 5530-5534, 2011, 2011 International
Conference on Consumer Electronics, Communications and Networks, CECNet 2011 Proceedings
156.The characteristics of chitosan applied in drinking water treatment
Li, Shaoxiu (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Hu, Shujie; Li, Dongmei; Duan, Weiwei;
Xia, Wenqin; Zheng, Zhijia Source: Advanced Materials Research, v 233-235, p 638-643,
2011, Fundamental of Chemical Engineering
157.Improved grid synchronization control of doubly fed induction generator under unbalanced
grid voltage
Chen, Si Zhe (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Cheung, Norbert C.; Zhang, Yun; Zhang, Miao; Tang, Xiong Min Source: IEEE
Transactions on Energy Conversion, v 26, n 3, p 799-810, September 2011
158.Preparation and properties of PA66/PP/MOS whisker composites
Peng, Jian (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou,
510006, China); Cao, Youming Source: Advanced Materials Research, v 311-313, p 20-25,
2011, Advanced Materials and Processes
159.Study on properties and preparation of thermoplastic polyurethane hot-melt adhesive
Tian, Junling (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Cao, Youming; Zhou, Xinqi Source: Advanced Materials Research, v 311-313,
p 1071-1076, 2011, Advanced Materials and Processes
160.An improved pedestrian detection method based on adaboost and performance analysis
Zhang, Yanxi (Guangzhou Higher Education Mega Center, Guangdong University of Technology,
No. 100 Waihuan Xi Road, Panyu District, Guangzhou, China); Gao, Xiangdong Source:
Advanced Materials Research, v 317-319, p 877-880, 2011, Equipment Manufacturing
Technology and Automation
161.Effects of tool rake angle on the curved radius during planing-forming process of fine heat
sink
Wei, Liang (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Zhao-Qin, Y.U.; Zhang, Le-Le; Zhang, Yongjun Source: Advanced Materials
Research, v 317-319, p 370-373, 2011, Equipment Manufacturing Technology and
Automation
162.Design and implementation of an attendance system for engineering training based on DSBA
Meilin, Wang (Faculty of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, Guangdong, China); Pinxin, Fu; Qingyun, Dai; Runyang, Zhong Source:
Communications in Computer and Information Science, v 235 CCIS, n PART 5, p 181-188,
2011, Information and Management Engineering - International Conference, ICCIC 2011,
Proceedings
163.Monitoring of drill process and prediction for remaining useful life of drill tool
Ao, Yinhui (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510090, China); Wang, Baosheng Source: Jixie Gongcheng Xuebao/Journal of
Mechanical Engineering, v 47, n 1, p 177-181, January 5, 2011
164.The study of the preparation of linolenic acid-amylose complexes and their oxidation stability
Lin, Ruohui (Food Science and Bioengineering Department, Guangdong University of Technology,
Guangzhou 510006, China); Wu, Kegang; Chai, Xianghua; Zhong, Shaoshu Source: Advanced
Materials Research, v 317-319, p 194-200, 2011, Equipment Manufacturing Technology and
Automation
165.Grey-relation analysis and neural networks model for relationship between
physico-mechanical indices and microstructure parameters of soft soils
Liu, Yong-Jian (Institute of Geotechnical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Li, Zhang-Ming Source: Yantu Lixue/Rock and Soil Mechanics, v
32, n 4, p 1018-1024, April 2011
166.Universal approximation properties for fuzzy logic systems based on monoids
Fan, Yongqing (Faculty of Automation, Guangdong University of Technology, Guangzhou, China);
Wang, Yinhe; Wang, Weichao; Liang, Luo; Yun, Zhang Source: Proceedings - 2010 International
Conference on Intelligent System Design and Engineering Application, ISDEA 2010, v 2, p
802-805, 2011, Proceedings - 2010 International Conference on Intelligent System Design and
Engineering Application, ISDEA 2010
167.SAHRC: A cluster-based routing control protocol for wireless sensor network
Zhang, Xiao-Bo (Faculty of Automation, Guangdong University of Technology, Guangzhou
510006, China); Cheng, Liang-Lun; Zhu, Quan-Min Source: Dianzi Yu Xinxi Xuebao/Journal of
Electronics and Information Technology, v 33, n 8, p 2013-2017, August 2011
168.Efficient key management scheme for mobile agent in a hierarchy
Liu, Yi (Faculty of Computer, Guangdong University of Technology, Guangzhou, 510006, China);
Ding, Yong Source: Proceedings - 4th International Joint Conference on Computational Sciences
and Optimization, CSO 2011, p 780-782, 2011, Proceedings - 4th International Joint
Conference on Computational Sciences and Optimization, CSO 2011
169.Preparation and photocatalytic activities of visible-light-driven TiO <inf>2</inf> films
codoped with aluminum and nitrogen
Cheng, Xiaoling (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Hu, Shejun; Hu, Yongjun; Lin, Yu; Wei, Zhigang
Source: Advanced Materials Research, v 150-151, p 1607-1612, 2011, Advances in
Composites
170.Analysis of mechanical performance of crumb rubber concrete by different aggregate shape
under uniaxial compression on mesoscopic
Zhong, Genquan (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Guo, Yongchang; Li, Juan; Liu, Feng Source: Key
Engineering Materials, v 462-463, p 219-222, 2011, Fracture and Strength of Solids VII
171.Investigation on the enhancement and the suppression of persistent luminescence of
Re³⁺ doped Sr<inf>2</inf>EuMgSi<inf>2</inf>O <inf>7</inf> (Re = Dy, Yb)
Wu, Haoyi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Chen, Li; Wang, Xiaojuan Source: Journal of
Alloys and Compounds, v 509, n 11, p 4304-4307, March 17, 2011
172.Investigation on Eu³ doped Sr<inf>2</inf>MgSi<inf>2</inf>O <inf>7</inf>
red-emitting phosphors for white-light-emitting diodes
Wu, Haoyi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Wang, Yinhai; Kang, Fengwen; Mou,
Zhongfei Source: Optics and Laser Technology, v 43, n 7, p 1104-1110, October 2011
173.Thermal performances analysis of microelectronic chip cooling system with thermoelectric
components
Wang, Changhong (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); Zhang, Jiangyun; Huang, Jin Source: Advanced Materials Research, v 216,
p 128-133, 2011, Optical, Electronic Materials and Applications
174.Fast and accurate self-localization of mobile robot based on multi-sensor
Zhang, Xue-Xi (College of Automation, Guangdong University of Technology, Guangzhou
Guangdong 510090, China); Yang, Yi-Min Source: Kongzhi Lilun Yu Yingyong/Control Theory
and Applications, v 28, n 3, p 443-448, March 2011
175.Review on advanced composite materials boring mechanism and tools
Shi, Runping (Guangdong University of Technology, Guangzhou, 510006, China); Wang,
Chengyong Source: Proceedings of SPIE - The International Society for Optical Engineering, v
7997, 2011, Fourth International Seminar on Modern Cutting and Measurement Engineering
176.Adsorption of phosphorus from Eutrophication water by modified diatomite
Peng, Jinping (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, Guangdong, China); Guo, Jianwei; Pang, Chunyang Source:
ICMREE2011 - Proceedings 2011 International Conference on Materials for Renewable Energy
and Environment, v 2, p 1500-1505, 2011, ICMREE2011 - Proceedings 2011 International
Conference on Materials for Renewable Energy and Environment
177.Algorithm of infrared gait detection based on chaos ant colony and space-time combination
Tan, Jian-Hui (Faculty of Automation, Guangdong University of Technology, Guangzhou, China);
Pan, Bao-Chang Source: Proceedings of the 2011 6th IEEE Conference on Industrial Electronics
and Applications, ICIEA 2011, p 1736-1741, 2011, Proceedings of the 2011 6th IEEE
Conference on Industrial Electronics and Applications, ICIEA 2011
178.Luminescence
investigation
of
Na<inf>z</inf>Ca<inf>1-x-2y-z</inf>Bi<inf>y</inf>MoO<inf>4</inf>:
Eu<inf>x+y</inf>³⁺ red phosphors
Kang, Feng-Wen (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yi-Hua; Wang, Yin-Hai; Wu, Hao-Yi; Mu,
Zhong-Fei; Ju, Gui-Fang; Fu, Chu-Jun Source: Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy
and Spectral Analysis, v 31, n 9, p 2341-2345, September 2011
179.Modified nonlinear morphological correlation using Laplace filtering
Wang, Qu (Guangdong University of Technology, School of Physics and Optoelectronic
Engineering, Guangzhou 510006, China); Chen, Li; Zhou, Jinyun; Lei, Liang; Wang, Bo Source:
Optics and Laser Technology, v 43, n 4, p 874-881, June 2011
180.Effect of ultrasonic disperse on the properties of carbon nanotubes supercapacitors
Yuan, Xinsheng (GuangDong University of Technology, Faculty of Material and Energy,
Guangzhou, Guangdong, 510006, China); Zhang, Haiyan; Chen, Yiming Source: Advanced
Materials Research, v 148-149, p 1417-1420, 2011, Manufacturing Processes and Systems
181.On-site test study of RC slabs strengthened with CFRP and BFRP
Xu, Xinjian (Guangdong University of Technology, Guangzhou, Guangdong, 510000, China); Li,
Lijuan; Zhou, Wenchao; Min, Ming; Liu, Feng Source: Advanced Materials Research, v 163-167,
p 3782-3786, 2011, Advances in Structures
182.Probability distribution analysis of structural response under non-Gaussian wind loads
Li, Jing (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou, Guangdong, 510006, China); Wang, Xin Source: Advanced Materials Research, v
163-167, p 4356-4362, 2011, Advances in Structures
183.Synthesis and field emission of ZnO bundles with high aspect ratio by solution method
Liu, Jun (Faculty of Materials and Energy, Guangdong University of Technology, No.100 Waihuan
Xi Road, Guang Zhou, 510006, China); Wei, Ai Xiang; Zhang, Hai Yan Source: Advanced
Materials Research, v 194-196, p 589-593, 2011, Advanced Engineering Materials
184.Electromagnetic characteristics and microwave absorption properties of CNT composite
Zhang, Min (Faculty of Materials and Energy, Guangdong University of Technology, No.100, Wai
Huan Xi Road, Guang Zhou, 510006, China); Zhang, Hai Yan; Zeng, Guo Xun Source: Advanced
Materials Research, v 194-196, p 520-523, 2011, Advanced Engineering Materials
185.A
red-emitting
heavy
doped
phosphor
Li<inf>6</inf>Y(BO<inf>3</inf>)
<inf>3</inf>:Eu³⁺ for white light-emitting diodes
Ju, Guifang (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Waihuan Xi Road, No. 100, Guangzhou 510006, China); Hu, Yihua; Wu, Haoyi;
Yang, Zhongfu; Fu, Chujun; Mu, Zhongfei; Kang, Fengwen Source: Optical Materials, v 33, n 8,
p 1297-1301, June 2011
186.Study on synthesis nanomicrostructures of zinc borate (Zn<inf>3</inf>B
<inf>6</inf>O<inf>12</inf>&middot3.5H<inf>2</inf>O) with different morphologies
Ren, Hui (Faculty of Polymer Materials and Engineering, Guangzhou Higher Education Mega
Center, Guangdong University of Technology, Waihuan Xi Road, Guangzhou, 510006, China);
Cao, You Ming; Lei, Zhou Qiao Source: Advanced Materials Research, v 236-238, p 1687-1691,
2011, Application of Chemical Engineering
187.Synthesis and performance of modified chitin sterilization-coagulants
Yuan, Bin (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, China); Lv, Song; Yin, Guangcai; Zheng, Dingcheng Source: 5th
International Conference on Bioinformatics and Biomedical Engineering, iCBBE 2011, 2011,
5th International Conference on Bioinformatics and Biomedical Engineering, iCBBE 2011
188.Control strategy &amp; calibration of fuel injection impulse width on EFI motorcycle engine
Peng, Meichun (Electro-mechanical Engineering Faculty, Guangdong University of Technology,
Guangzhou, China); Deng, Xubing; Liang, Xiaofeng Source: 2011 International Conference on
Electric Information and Control Engineering, ICEICE 2011 - Proceedings, p 2047-2053, 2011,
2011 International Conference on Electric Information and Control Engineering, ICEICE 2011 Proceedings
189.Weld-pool image centroid algorithm for seam-tracking vision model in arc-welding process
Gao, X. (Faculty of Mechanical and Electrical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Ding, D.; Bai, T.; Katayama, S. Source: IET Image Processing, v 5,
n 5, p 410-419, August 2011
190.Self-learning control of hydraulic injection molding machine based on fuzzy neural network
Li, Xiao (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Yang, Xiaohua Source: Applied Mechanics and Materials, v 66-68,
p 1117-1121, 2011, Mechanical, Materials and Manufacturing Engineering
191.The simulation study of the maximum learning incremental worker-station assignment based
on learning-forgetting
Liu, Huizhen (School of Management, Guangdong University of Technology, Guangzhou, China);
Zhang, Bixi; Hu, Shengqiang; Zhang, Yuling; Guan, Shihua Source: 2011 2nd International
Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings, p
7852-7854, 2011, 2011 2nd International Conference on Mechanic Automation and Control
Engineering, MACE 2011 - Proceedings
192.Analysis of accidental consequence of butadiene tank
Ning, Xunan (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou Guangdong, 510006, China); Zhou, Jianbo; Liu, Jingyong; Yang, Zuoyi;
Zhang, Ning Source: Applied Mechanics and Materials, v 71-78, p 2243-2248, 2011,
Frontiers of Green Building, Materials and Civil Engineering
193.Photocatalytic inactivation of chlorella by TiO<inf>2</inf>/foam nickel
Xiong, Zhongqiong (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, Guangdong, 5l0006, China); Zhang, Guoqing; Xiong, Liang; Fu, Lipeng; Pan,
Huageng Source: Applied Mechanics and Materials, v 71-78, p 2944-2947, 2011, Frontiers
of Green Building, Materials and Civil Engineering
194.Formal specification for real time cyber physical systems using aspect-oriented approach
Zhang, Lichen (Faculty of Computer Science and Technology, Guangdong University of
Technology, Guangzhou 510090, China) Source: Proceedings - 5th International Conference on
Theoretical Aspects of Software Engineering, TASE 2011, p 213-216, 2011, Proceedings - 5th
International Conference on Theoretical Aspects of Software Engineering, TASE 2011
195.Aspect-oriented MDA development method for non-functional properties of cyber physical
systems
Liu, Jingyong (Faculty of Computer Science and Technology, Guangdong University of
Technology, Guangzhou 510090, China); Zhang, Lichen Source: Proceedings - 2nd International
Conference on Networking and Distributed Computing, ICNDC 2011, p 149-153, 2011,
Proceedings - 2nd International Conference on Networking and Distributed Computing, ICNDC
2011
196.Direct-torque control of the brushless double-fed machines based on sliding-mode variable
structure control strategy
Yang, Jun-Hua (Faculty of Automation, Guangdong University of Technology, Guangzhou
Guangdong 510006, China); Liu, Yuan-Tao; Xie, Jing-Feng; Liu, Hui-Yuan; Wu, Jie Source:
Kongzhi Lilun Yu Yingyong/Control Theory and Applications, v 28, n 9, p 1195-1201,
September 2011
197.License plate location based on combinatorial feature
Yan-Qing, Zheng (Faculty of Computer, Guangdong University of Technology, Guangzhou,
China); Dai-Ping, Li; Shu-Wen, Zhang Source: 2011 Microwaves, Radar and Remote Sensing
Symposium, MRRS-2011 - Proceedings, p 165-168, 2011, 2011 Microwaves, Radar and
Remote Sensing Symposium, MRRS-2011 - Proceedings
198.The bioavailability of the heavy metals in the surface sediment from Pearl River Guangzhou
Section
Lv, Wengying (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Liu, Guoguang Source: 2011 International Conference
on Electrical and Control Engineering, ICECE 2011 - Proceedings, p 5555-5560, 2011, 2011
International Conference on Electrical and Control Engineering, ICECE 2011 - Proceedings
199.Establishment and analysis of auto-focus model for laser triangulation method
Fan, Fuming (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Cheng, Lianglun; Xiao, Lei; Zhu, Quanmin Source: Hongwai yu Jiguang
Gongcheng/Infrared and Laser Engineering, v 40, n 10, p 2028-2032, October 2011
200.Analysis of molten pool configuration and welding stability during high-power fiber laser
welding
Gao, Xiangdong (Faculty of Mechanical and Electrical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhang, Yong; You, Deyong; Seiji, Katayama Source:
Hanjie Xuebao/Transactions of the China Welding Institution, v 32, n 9, p 13-16, September
2011
201.Hollow fiber supported liquid-phase microextraction using ionic liquid as extractant for
preconcentration of benzene, toluene, ethylbenzene and xylenes from water sample with gas
chromatography-hydrogen flame ionization detection
Ma, Xiaoguo (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Huang, Minghua; Li, Zhihua; Wu, Jianmei Source:
Journal of Hazardous Materials, v 194, p 24-29, 30 October 2011
202.Effects of adding 0.05% (La+Ce) on intermetallic compounds at Sn-X-Cu-Ni/Cu interface
Chen, Hai-Yan (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Jie, Xiao-Hua; Zhang, Hai-Yan; Guo, Li Source: Cailiao
Gongcheng/Journal of Materials Engineering, n 9, p 29-32+38, September 2011
203.A review on development and trend of Intelligent Maintenance System
Ao, Yinhui (Faculty of Mechanical and Electronic Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, 510090, China) Source: Advanced Materials Research, v
314-316, p 2365-2369, 2011, Advanced Manufacturing Technology
204.Research of high efficiency combined wire electrochemical machining technology and its
application
Wu, He (Faculty of Mechanical and Electronic Engineering, Guangdong University of Technology,
China); Xiao, Shuhong; Li, Qingguo; Zhang, Yongjun Source: Advanced Materials Research, v
314-316, p 1015-1019, 2011, Advanced Manufacturing Technology
205.Empirical study on process optimization of MTO production systems
Guan, Yingying (School of Management, Guangdong University of Technology, NO.161 Yinglong
Rd., Guangzhou, Guangdong, 510520, China); Zhang, Bixi; Song, Jing Source: Advanced
Materials Research, v 317-319, p 2302-2305, 2011, Equipment Manufacturing Technology
and Automation
206.Green synthesis of silver nanoparticles using flos sophorae immaturus extract and bactericidal
activity
Du, Zhiyun (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Tang, Zhikai; Mo, Rongqing; Lu, Yujing; Jiang, Yongfu;
Xue, Guihua; Zhang, Kun Source: Advanced Materials Research, v 317-319, p 475-478, 2011,
Equipment Manufacturing Technology and Automation
207.Luminescence
properties
of
red
phosphors
Ca<inf>10</inf>Li(PO
<inf>4</inf>)<inf>7</inf>:Eu³⁺
Song, Enhai (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhao, Weiren; Zhou, Guoxiong; Dou, Xihua; Yi,
Chunyu; Zhou, Minkang Source: Journal of Rare Earths, v 29, n 5, p 440-443, May 2011
208.Study on Ship Dynamic Positioning system's Thruster Allocation based on genetic algorithm
Xu, Rong-Hua (College of Automation, Guangdong University of Technology, Guangdong
Guangzhou, 510006, China); Wang, Qin-Ruo; Song, Ya-Nan; Zheng, Ri-Rong; Chen, Min-Jin
Source: 2011 International Conference on Information Science and Technology, ICIST 2011, p
1222-1224, 2011, 2011 International Conference on Information Science and Technology,
ICIST 2011
209.The improvement of spectrometric determination of COD by microwave digestion with
digestion vessels
Zhuang, Wen (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, China); Luo, Jianzhong Source: 5th International Conference on
Bioinformatics and Biomedical Engineering, iCBBE 2011, 2011, 5th International Conference
on Bioinformatics and Biomedical Engineering, iCBBE 2011
210.Preparation
and
luminescence
characteristics
of
white-light
emitting
Ca<inf>9.95-x</inf>Na<inf>0.75</inf>K<inf>0.25</inf>
(PO<inf>4</inf>)<inf>7</inf>:Eu<inf>0.05</inf>²⁺,
Mn<inf>x</inf>²⁺ phosphors
Zhou, Guo-Xiong (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhao, Wei-Ren; Song, En-Hai; Dou, Xi-Hua; Yi,
Chun-Yu; Zhou, Min-Kang Source: Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and
Spectral Analysis, v 31, n 8, p 2058-2062, August 2011
211.Auxiliary algorithms in green multi-agent planning framework
Rao, Dongning (Faculty of Computer, Guangdong University of Technology, Guangzhou 510090,
China); Jiang, Zhihua Source: Proceedings - 2011 International Conference on Network
Computing and Information Security, NCIS 2011, v 1, p 175-179, 2011, Proceedings - 2011
International Conference on Network Computing and Information Security, NCIS 2011
212.Finite element analysis on thermal characteristics of lathe motorized spindle
Ma, Ping (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 51006, China); Zhou, Biao; Li, Haipeng Source: Advanced Materials Research, v
311-313, p 2434-2439, 2011, Advanced Materials and Processes
213.Finite element analysis of cold expanding of hollow thin-wall tube
Kuang, Weihua (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China) Source: Key Engineering Materials, v 460-461, p 44-47, 2011,
Components, Packaging and Manufacturing Technology
214.Optimal design of truss-plate structures using two improved random optimization algorithms
Zhong, Genquan (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Li, Lijuan; Liu, Feng Source: Advanced
Materials Research, v 163-167, p 2361-2364, 2011, Advances in Structures
215.Chaos synchronization of multi-scroll Chua system via fractional order hybrid feedback
controller
Xi, Huiling (College of Automation, Guangdong University of Technology, Guangzhou 510006,
China) Source: Proceedings of the 30th Chinese Control Conference, CCC 2011, p 599-602,
2011, Proceedings of the 30th Chinese Control Conference, CCC 2011
216.An improved fastSLAM algorithm based on genetic algorithms
Xia, Yi-Min (College of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Yang, Yi-Min Source: Communications in Computer and Information Science, v 86
CCIS, p 296-302, 2011, Information and Automation - International Symposium, ISIA 2010,
Revised Selected Papers
217.Dynamic scheduling for multiple mould and die projects based on improved particle swarm
optimization
Zhang, Sha-Qing (School of Mechatronics Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Chen, Xin-Du; Chen, Qing-Xin; Chen, Xin Source: Jisuanji Jicheng
Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, v 17, n 3, p 622-629,
March 2011
218.Study on thermal performance of passive evaporative cooling double-skin facade
Ye, Tingqiao (Guangdong University of Technology, 510090, Guangzho, China); Ke, Xiufang
Source: Proceedings - 3rd International Conference on Measuring Technology and Mechatronics
Automation, ICMTMA 2011, v 3, p 593-596, 2011, Proceedings - 3rd International
Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2011
219.Characteristics of particulate Polycyclic Aromatic Hydrocarbons(PAHs)in the three typical
cities of the Pearl River Delta, China
Lin, Qintie (School of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, China); Pan, Hanping; Su, Yanhua; Chen, Laiguo; Peng, Xiaochun
Source: 5th International Conference on Bioinformatics and Biomedical Engineering, iCBBE
2011, 2011, 5th International Conference on Bioinformatics and Biomedical Engineering,
iCBBE 2011
220.More stringent confinement limit of the Dirac particle in one dimension
Cheng, Jian-Yuan (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, 510006 Guangzhou, China) Source: Physical Review A - Atomic, Molecular, and
Optical Physics, v 83, n 5, May 26, 2011
221.Performance of a passively cooled fresnel lens concentrating photovoltaic module
Mo, Songping (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); Chen, Zeshao; Hu, Peng Source: 2011 Asia-Pacific Power and Energy
Engineering Conference, APPEEC 2011 - Proceedings, 2011, 2011 Asia-Pacific Power and
Energy Engineering Conference, APPEEC 2011 - Proceedings
222.Influence of sewage pipe network on COD reduction efficiency in sewage treatment plant
Zheng, Guohui (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Luo, Jianzhong; Qiu, Hongrong Source: Proceedings International Conference on Computer Distributed Control and Intelligent Environmental
Monitoring, CDCIEM 2011, p 881-884, 2011, Proceedings - International Conference on
Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2011
223.Hydrothermal synthesis and field emission performance of single crystalline TiO<inf>2</inf>
nanowires bundle arrays
Ge, Zeng-Xian (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Liu, Jun; Wei, Ai-Xiang; Zhao, Wang Source: Rengong Jingti
Xuebao/Journal of Synthetic Crystals, v 40, n 2, p 365-369, April 2011
224.A global unsupervised data discretization algorithm based on collective correlation coefficient
Zeng, An (Guangdong University of Technology, China); Gao, Qi-Gang; Pan, Dan Source:
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence
and Lecture Notes in Bioinformatics), v 6703 LNAI, n PART 1, p 146-155, 2011, Modern
Approaches in Applied Intelligence - 24th International Conference on Industrial Engineering and
Other Applications of Applied Intelligent Systems, IEA/AIE 2011, Proceedings
225.Roll damping and anti-capsizing system for ships using fuzzy-extension control strategy
Wang, Minghui (Faculty of Computer Science, Guangdong University of Technology, China); Yu,
Yongquan; Zeng, Bi Source: Applied Mechanics and Materials, v 84-85, p 144-154, 2011,
Green Power, Materials and Manufacturing Technology and Applications, GPMMTA2011
226.Application of serial communication control in the motion control system
Liu, Jianqun (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Wu, Jirong; Xu, Dong; Li, Xiao; Huang, Jian Source: Advanced
Materials Research, v 328-330, p 1953-1956, 2011, Mechatronics and Materials Processing I
227.The effects of tuning controller gains for servo feed unit positioning accuracy
Kong, Linglin (Faculty Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Li, Duanneng; Li, Ke Source: Advanced Materials Research, v 317-319, p
1974-1978, 2011, Equipment Manufacturing Technology and Automation
228.The rehabilitation of pile foundation of a concrete continous bridge in Guangzhou City
Jiang, Haibo (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, 510006, Guangzhou, China); Yang, Lingming; He, Aide Source: Advanced Materials
Research, v 163-167, p 3499-3503, 2011, Advances in Structures
229.What is unequal among the equals? Ranking equivalent rules from gene expression data
Cai, Ruichu (Faculty of Computer Science, Guangdong University of Technology, Guangzhou
Higher Education Mega Center, Guangzhou 510006, China); Tung, Anthony K. H.; Zhang,
Zhenjie; Hao, Zhifeng Source: IEEE Transactions on Knowledge and Data Engineering, v 23, n
11, p 1735-1747, 2011
230.Advanced Materials Research: Preface
Wang, Chengyong (Guangdong University of Technology, China) Source: Advanced Materials
Research, v 188, 2011, High Speed Machining
231.Preparation and lipophilic performance of nano-Y<inf>2</inf>O<inf>3</inf> modified with
stearic acid
Zhang, Lin (School of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, Guangdong, China); Yu, Lin; Cheng, Xiaoling; Diao, Guiqiang
Source: Huagong Xuebao/CIESC Journal, v 62, n 3, p 880-885, March 2011
232.Finite element analysis of mobile towers made of prefabricated elements according to
standardization EN1004
Lv, Huiqing (School of Civil and Transportation Engineering, Guangdong University of
Technology, Da Xue Cheng, Guangzhou, 510006, China); Zhang, Xiangwei Source: Advanced
Materials Research, v 243-249, p 552-556, 2011, Advances in Civil Engineering and
Architecture
233.Implementation tactics of green operation based on enterprise and government
Li, Song-Qing (School of Management, Guangdong University of Technology, Guangzhou,
China) Source: BMEI 2011 - Proceedings 2011 International Conference on Business
Management and Electronic Information, v 5, p 442-445, 2011, BMEI 2011 - Proceedings
2011 International Conference on Business Management and Electronic Information - Special
Track on Supernetworks and System Management, ICSSM2011
234.A topological optimization method for flexible multi-body dynamic system using epsilon
algorithm
Yang, Zhi-Jun (Faculty of ElectroMechanical Engineering, Guangdong University of Technology,
China); Chen, Xin; Kelly, Robert Source: Structural Engineering and Mechanics, v 37, n 5, p
475-487, March 10, 2011
235.Study on the preparation and electrochemical performance of rare earth doped
nano-Ni(OH)<inf>2</inf>
Ye, Xiancong (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhu, Yanjuan; Wu, Shanggai; Zhang, Zhongju; Zhou,
Zhuojun; Zheng, Hanzhong; Lin, Xiaoran Source: Journal of Rare Earths, v 29, n 8, p 787-792,
August 2011
236.The finite ridgelet transform for defeat detection of quill
Liu, Hongjiang (Faculty of Automation, Guangdong University of Technology, Guangzhou,
Guangdong, China); Wang, Renhuang; Ming, Junfeng; Li, Xuecong Source: Advanced Materials
Research, v 317-319, p 915-918, 2011, Equipment Manufacturing Technology and
Automation
237.Anisotropy of deformation behavior of AZ31 magnesium alloy sheets
Cheng, Yong Qi (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou 510006, Guangdong, China); Chen, Zhen Hua Source: Advanced Materials Research,
v 314-316, p 1121-1125, 2011, Advanced Manufacturing Technology
238.Analysis of the main parameters in the chemical mechanical polishing process
Yang, Xiangdong (Faculty of Electromechanical Engineering, Higher Education Mega Center,
Guangdong University of Technology, 100 Waihuan Xi Road, Guangzhou, 510006, China); Wei,
Xin; Xie, Xiaozhu; Chen, Zhuo; Zou, Weibo Source: Advanced Materials Research, v 317-319,
p 29-33, 2011, Equipment Manufacturing Technology and Automation
239.Schedulability analysis of short-term scheduling for crude oil operations in refinery with oil
residency time and charging-tank-switch-overlap constraints
Wu, Naiqi (Department of Industrial Engineering, School of Mechatronics Engineering,
Guangdong University of Technology, Guangzhou 510006, China); Chu, Chengbin; Chu, Feng;
Zhou, Mengchu Source: IEEE Transactions on Automation Science and Engineering, v 8, n 1, p
190-204, January 2011
240.An improved multiple fuzzy NNC system based on mutual information and fuzzy integral
Wang, Li Juan (Faculty of Computer, Guangdong University of Technology, Guangzhou 510006,
China) Source: International Journal of Machine Learning and Cybernetics, v 2, n 1, p 25-36,
March 2011
241.A prediction method for nonlinear correlative time series
Yuan, Conggui (Guangdong University of Technology, Automation Dept., Guangzhou, China);
Zhang, Xinzheng; Xu, Shuqiong Source: Applied Mechanics and Materials, v 40-41, p 930-936,
2011, Advances in Science and Engineering Frontier Topics in Theoretical and Applied Science
and Engineering
242.Doping dependence of electron populations in optically pumped step quantum well structures
Liu, Dong-Feng (School of Information Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Lin, Yi-Xin Source: Semiconductor Science and Technology, v 26,
n 2, February 2011
243.The impact of call auction algorithm on stock price
Sun, You-Fa (School of Management, Guangdong University of Technology, Guangzhou 510520,
China); Zhang, Cheng-Ke; Liu, Cai-Yan; Yue, Hu; Ma, Zan-Fu; Wu, Sai Source: Xitong
Gongcheng Lilun yu Shijian/System Engineering Theory and Practice, v 31, n 1, p 28-37,
January 2011
244.Microwave-assisted synthesis and characterization of 1, 3-di(n-butyl)imidazolium
hexafluorophosphate ionic liquid
Chen, Ju-Fang (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Ma, Xiao-Guo; Dang, Yong-Feng; Gao, Zhong-Ben
Source: Gongneng Cailiao/Journal of Functional Materials, v 42, n SUPPL. 1, p 34-35+46,
February 2011
245.A novel synthesis of 3-amino-1-adamantanemethanol
Cai, Lu (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Guo, Jianwei; Liu, Sa; Yang, Chufen; Zhu, Hua; Peng,
Jinping Source: Advanced Materials Research, v 233-235, p 225-228, 2011, Fundamental of
Chemical Engineering
246.An implementation and improvement of fast two-dimensional median filtering
Wang, Guitang (Faculty of Information Engineering, Guangdong University of Technology,
Guangzhou, China); Wanga, Ruihuang; Wang, Feng; Liu, WenJuan Source: Applied Mechanics
and Materials, v 55-57, p 95-100, 2011, Recent Trends in Materials and Mechanical
Engineering Materials, Mechatronics and Automation
247.Interfacial stress analysis of fiber sheet/steel plate-reinforced concrete beams with cracks
under tension and bending
Ling, Ling (College of Mechatronic Engineering, Guangdong University of Technology, No. 729
Dongfeng East Road, Guangzhou, 510006, China); Zeng, Qing Dun; Wang, Gui Yuan Source:
Applied Mechanics and Materials, v 69, p 61-66, 2011, Advances in Material Engineering
and Mechanical Engineering
248.A improved NSGA-II algorithm based on sub-regional search
Liu, Hai-Lin (Faculty of Applied Mathematics, Guangdong University of Technology, Guangzhou
City, Guandong Province, China); Gu, Fangqing Source: 2011 IEEE Congress of Evolutionary
Computation, CEC 2011, p 1906-1911, 2011, 2011 IEEE Congress of Evolutionary
Computation, CEC 2011
249.White
light
emitting
from
single
phased
K<inf>2</inf>Ca
<inf>1-x-y</inf>P<inf>2</inf>O<inf>7</inf>:
XEu²⁺,
yMn²⁺
phosphors under UV excitation
Song, Enhai (Guangdong University of Technology, School of Physics and Optoelectronic
Engineering, Guangzhou 510006, China); Zhao, Weiren; Zhou, Guoxiong; Dou, Xihua; Ming,
Huachu; Yi, Chunyu Source: Current Applied Physics, v 11, n 6, p 1374-1378, November 2011
250.State transition-based for cooperative Shot Boundary Detection
Zhang, Wei (Faculty of Computer, Guangdong University of Technology, Guangzhou City, China);
Teng, Shaohua; Fu, Xiufen Source: Proceedings of the 2011 15th International Conference on
Computer Supported Cooperative Work in Design, CSCWD 2011, p 125-130,
2011,
Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work
in Design, CSCWD2011
251.Study on reverse micro emulsion method applied in preparation of catalyst
MnBaAl<inf>11</inf>O<inf>19-&delta;</inf> for dimethyl ether combustion
Yu, Qian (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, China); Yu, Lin; Diao, Guiqiang; Sun, Ming; Huang, Yingmin; Li,
Yongfeng Source: Advanced Materials Research,
v 148-149, p 1532-1537,
2011,
Manufacturing Processes and Systems
252.Unsteady aerodynamic characteristic analysis of horizontal axis wind turbine blade
Li, De-Yuan (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Fang, Jun; Lv, Wen-Ge; Luo, Shao-Ming Source: Shenyang Gongye
Daxue Xuebao/Journal of Shenyang University of Technology, v 33, n 1, p 36-40+61,
February 2011
253.Luminescent
properties
of
Na<inf>3</inf>Gd<inf>1-x</inf>Eu
<inf>x</inf>(PO<inf>4</inf>)<inf>2</inf> and energy transfer in these phosphors
Ju, Guifang (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Waihuan Xi Road, No. 100, Guangzhou 510006, Guangdong, China); Hu, Yihua;
Chen, Li; Wang, Xiaojuan; Mu, Zhongfei; Wu, Haoyi; Kang, Fengwen Source: Journal of Alloys
and Compounds, v 509, n 18, p 5655-5659, May 5, 2011
254.Mechanisms and effects of extraction time on the leachability of heavy metals in sewage
sludge from Guangzhou
Liu, Jing Yong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, No. 100, Waihuan Xi Road, Panyu District, Guangzhou, 510006, China); Sun, Shui
Yu; Xu, Yan Bin; Zheng, Li; Huang, Shao Song Source: Advanced Materials Research, v
197-198, p 1771-1775, 2011, New and Advanced Materials
255.Shield's EPB simulation device based on fluid power transmission principle
Li, Xiao (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Su, Xiaojiang Source: Key Engineering Materials, v 480-481, p
745-750, 2011, Materials Engineering for Advanced Technologies
256.Application of numerical simulation in stamping process of complex box-type parts
Wang, Guangkai (Faculty of Electromechanical Engineering, Guangdong University of
Technology, Guangzhou, China); Cheng, Siyuan; Li, Suyang; Zhang, Xiangwei Source: Advanced
Materials Research, v 291-294, p 579-584, 2011, Materials Processing Technology
257.Topological optimization approach for structure design of high speed mechanisms using
equivalent static loads method
Yang, Zhijun (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China) Source: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,
v 47, n 17, p 119-126, September 5, 2011
258.Structural and photoluminescence properties of Eu-doped ZnO thin films grown by RF
magnetron sputtering
Gao, Zhen-Jie (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Yang, Yuan-Zheng; Xie, Zhi-Wei; Wang, Yan-Li Source: Faguang
Xuebao/Chinese Journal of Luminescence, v 32, n 10, p 1004-1008, October 2011
259.QoS modeling for cyber-physical systems using aspect-oriented approach
Liu, Jingyong (Faculty of Computer Science and Technology, Guangdong University of
Technology, Guangzhou 510090, China); Zhang, Lichen Source: Proceedings - 2nd International
Conference on Networking and Distributed Computing, ICNDC 2011, p 154-158, 2011,
Proceedings - 2nd International Conference on Networking and Distributed Computing, ICNDC
2011
260.Preparation and electrochemical performance of SnSb-Ag composite alloy anode materials
Wang, Yanyi (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Zhang, Peixin; Ren, Xiangzhong; Yi, Guobin Source:
Journal of the Electrochemical Society, v 158, n 12, p A1404-A1410, 2011
261.Using improved weighted parabolic interpolation and contourlet transformation to zoom
images for super-resolution
Cai, Nian (School of Information Engineering, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Hai-Yuan; Zhang, Nan Source: Shanghai Jiaotong Daxue Xuebao/Journal
of Shanghai Jiaotong University, v 45, n 10, p 1509-1515, October 2011
262.Fuzzy adaptive control design for a class of nonlinear systems with scalers and saturators
Fan, Yong-Qing (Faculty of Automation, Guangdong University of Technology, Guangzhou
Guangdong 510006, China); Wang, Yin-He; Luo, Liang; Zhang, Yun Source: Kongzhi Lilun Yu
Yingyong/Control Theory and Applications, v 28, n 9, p 1105-1110, September 2011
263.Fuzzy Sarsa learning algorithm based on ant colony optimization
Chen, Xuesong (Faculty of Applied Mathematics, Guangdong University of Technology,
Guangzhou 510006, China); Yang, Yimin Source: Huazhong Keji Daxue Xuebao (Ziran Kexue
Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), v
39, n SUPPL. 2, p 340-343, November 2011
264.Adaptive fuzzy wavelet neural network filter for hand tremor canceling in microsurgery
Liu, Zhi (Department of Automation, Guangdong University of Technology, Guangzhou, China);
Wu, Qihang; Zhang, Yun; Wang, Yaonan; Chen, C.L. Philip Source: Applied Soft Computing
Journal, v 11, n 8, p 5315-5329, December 2011
265.Formation mechanism of alloyed layer with W, Mo, Co co-diffusion in pure iron
Zhang, Yanmei (College of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Jie, Xiaohua; Li, Zhonghou; Xu, Zhong Source: Advanced Materials
Research, v 154-155, p 1817-1821, 2011, Materials Processing Technologies
266.The planning of Clothing Style Information Management System
Chai, Lifang (Art Design College, Guangdong University of Technology, Guangzhou, China); Sun,
Enle; Tie, Lanye Source: 2011 International Conference on Control, Automation and Systems
Engineering, CASE 2011, 2011, 2011 International Conference on Control, Automation and
Systems Engineering, CASE 2011
267.A research methodology based on design science for the construction of cognitive maps: The
case of a Chinese steel company's strategic decision making
Zhong, Ying-Hong (Guangdong University of Technology, Guangzhou, China); Liu, Hong-Wei
Source: Advanced Materials Research, v 204-210, p 2098-2102, 2011, Advanced Research
on Industry, Information System and Material Engineering
268.Microstructural effects in corrosion of aluminium tube alloys
Wang, Guan (Institute of Mechatronics, Guangdong University of Technology, Guangzhou
510006, China); Jiao, Hui-Sheng Source: Transactions of Nonferrous Metals Society of China
(English Edition), v 21, n 6, p 1193-1198, June 2011
269.Electroless plating of silver on cenosphere particles and the investigation of its corrosion
behavior in composite silicon rubber
Hu, Yong-Jun (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
Higher Education Mega Center, No. 100 Waihuan Xi Road, Panyu District, Guangzhou, China);
Zhang, Hai-Yan; Cheng, Xiao-Ling; Li, Feng; Chen, Tian-Li Source: Applied Surface Science, v
257, n 7, p 2813-2817, 2011
270.Multigrid algorithm from cyclic reduction for Markovian queueing networks
Yang, Shu-Ling (School of Applied Mathematics, Guangdong University of Technology,
Guangzhou, China); Cai, Jian-Feng; Sun, Hai-Wei Source: Applied Mathematics and Computation,
v 217, n 16, p 6990-7000, April 15, 2011
271.Preparation and characterization of ZrO<inf>2</inf>/CNTs by hydrthermal method
Zheng, Yuying (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Ji, Wenjin; Li, Jun; Huang, Huimin; Ming, Sun Source:
Advanced Materials Research, v 335-336, p 28-31, 2011, Advanced Materials and Structures
272.Multi-robot task allocation based on the modified particle swarm optimization algorithm
Chen, Jianping (School of Automation, Guangdong University of Technology, Guangzhou, China);
Yang, Yimin; Wu, Yunbiao Source: Proceedings - 2011 7th International Conference on Natural
Computation, ICNC 2011, v 3, p 1744-1749, 2011, Proceedings - 2011 7th International
Conference on Natural Computation, ICNC 2011
273.Dielectric and ferroelectric properties of (Pb<inf>0.9</inf>Ba <inf>0.1</inf>)
ZrO<inf>3</inf> ceramics
Wu, J.B. (School of Physics and Optoelectric Engineering, Guangdong University of Technology,
Guangzhou Higher Education Mega Center, Guangzhou, 510006, China); Tang, X.G.; Liu, Q.X.;
Jiang, Y.P. Source: Materials Science Forum, v 687, p 247-250, 2011, Functional and
Electronic Materials
274.An improved fuzzy Sarsa learning
Chen, Xue-Song (Faculty of Applied Mathematics, Guangdong University of Technology,
Guangzhou 510006, China); Yang, Yi-Min Source: Beijing Youdian Daxue Xuebao/Journal of
Beijing University of Posts and Telecommunications, v 34, n 2, p 31-34+44, April 2011
275.Low-frequency band gaps in one-dimensional thin phononic crystal plate with periodic
stubbed surface
Yao, Yuanwei (Department of Physics, Guangdong University of Technology, Guangzhou 510006,
China); Hou, Zhilin; Wu, Fugen; Zhang, Xin Source: Physica B: Condensed Matter, v 406, n 11,
p 2249-2253, May 15, 2011
276.The prediction of mould project duration based on recursive network
Changwei, Hu (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Xindu, Chen; Qingxin, Chen Source: Proceedings - 4th International
Conference on Intelligent Computation Technology and Automation, ICICTA 2011, v 2, p
1229-1232, 2011, Proceedings - 4th International Conference on Intelligent Computation
Technology and Automation, ICICTA 2011
277.Research and implementation of unit optimization combination of hydropower plant based on
multi-Agent genetic algorithm
Meng, An-Bo (Automation Faculty, Guangdong University of Technology, Guangzhou 510006,
China); Liu, Yong-Qian; Xu, Hai-Bo Source: Dianli Xitong Baohu yu Kongzhi/Power System
Protection and Control, v 39, n 1, p 23-28, January 1, 2011
278.A study on the influence models of the correlation between nutrition factors and the breakout
of algal bloom
Cao, Xin (School of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou, China); Wang, Zhihong Source: 2011 International Conference on Electric
Technology and Civil Engineering, ICETCE 2011 - Proceedings, p 966-970, 2011, 2011
International Conference on Electric Technology and Civil Engineering, ICETCE 2011 Proceedings
279.White-light generation and energy transfer in Y<inf>2</inf>O <inf>3</inf>:Bi,Eu phosphor
for ultraviolet light-emitting diodes
Ju, Guifang (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Chen, Li; Wang, Xiaojuan; Mu, Zhongfei;
Wu, Haoyi; Kang, Fengwen Source: Journal of the Electrochemical Society, v 158, n 10, p
J294-J299, 2011
280.A new algorithm of infrared gait detection based on immune ant colony
Tan, Jianhui (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
China) Source: Proceedings of 2011 International Conference on Electronic and Mechanical
Engineering and Information Technology, EMEIT 2011,
v 9, p 4875-4878,
2011,
Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and
Information Technology, EMEIT 2011
281.Study on propagation behavior of fatigue interface crack in RC beam strengthened with
prestressed FRP
Xie, Jian-He (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, Guangdong 510006, China); Huang, Pei-Yan; Guo, Yong-Chang; Liu,
Feng Source: Gongcheng Lixue/Engineering Mechanics, v 28, n 7, p 180-185+216, July 2011
282.Synthesis and properties of polyurethane modified with hydroxyl terminated polysiloxane
Tian, Junling (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Cao, Youming; Zhou, Xiaotao Source: Advanced Materials Research, v
335-336, p 881-885, 2011, Advanced Materials and Structures
283.Preparation of palladium based catalysts by electroless plating and their application in
catalytic combustion of toluene
Li, Yong-Feng (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Li, Yu; Yu, Lin; Yu, Qian; Pan, Ji-Fei
Source: Advanced Materials Research,
v 156-157, p 973-978,
2011,
Advanced
Manufacturing Technology
284.Simulation of general 3D virtual stochastic road model
Lin, Min (Department of Automobile Engineering, Faculty of Electromechanical Engineering,
Guangdong University of Technology, Guangzhou 510006, China); Zhang, Xiangwei; Cheng,
Siyuan Source: Applied Mechanics and Materials,
Structure and Vibration Control
v 50-51, p 382-385,
2011,
Intelligent
285.A Stackelberg game approach to mixed H<inf>2</inf>/H<inf>&infin;</inf> robust control
for singular bilinear systems
Zhu, Huainian (School of Management, Guangdong University of Technology, Guangzhou,
China); Zhang, Chengke; Sun, Peihong; Bin, Ning Source: Advanced Materials Research, v
204-210, p 1839-1847, 2011, Advanced Research on Industry, Information System and
Material Engineering
286.Synthesis of styrene-acrylic emulsion modified with hydroxyl phosphate and its corrosion
properties
Xu, Yixiang (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Yu, Qian; Lin, Tanting; Yao, Huang; Lin, Yu; Xu,
Zhenyang; Zhang, Hong Source: Advanced Materials Research, v 233-235, p 1157-1161, 2011,
Fundamental of Chemical Engineering
287.Investigation on the co-combustion characteristics of pulverized coal and paper mill sludge
Zhang, Ning (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, NO.100 Waihuan Xi Road, Guangzhou Guangdong, 510006, China); Ning, Xun An;
Zhou, Jian Bo; Wei, Pei Tao; Luo, Hai Jian Source: Applied Mechanics and Materials, v 55-57, p
1132-1137, 2011, Recent Trends in Materials and Mechanical Engineering Materials,
Mechatronics and Automation
288.Mechanical test on modified concrete with recycled plastic particles and its numerical
simulation
Liu, Feng (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Huang, Hai-Bin; Xia, Xiao-Zhou; Li, Li-Juan; Zhong, Gen-Quan;
Guo, Yong-Chang Source: Jianzhu Cailiao Xuebao/Journal of Building Materials, v 14, n 2, p
173-179, April 2011
289.Rapid synthesis of cryptomelane-type manganese oxide under ultrasonic process
Sun, Ming (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Yu, Lin; Ye, Fei; Diao, Guiqiang; Yu, Qian; Zheng,
Yuying; Piquemal, Jean-Yves Source: Materials Letters, v 65, n 19-20, p 3184-3186, October
2011
290.Preface
Guo, Zhongning (Guangdong University of Technology, China) Source: Advanced Materials
Research, v 311-313, 2011, Advanced Materials and Processes
291.Exploration on shape of profiles determined by chord angle control method
Ling, Ling (College of Mechatronic Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Zeng, Yuan-Sheng Source: Advanced Materials Research, v
314-316, p 837-841, 2011, Advanced Manufacturing Technology
292.Seam tracking monitoring based on keyhole features during high-power fiber laser welding
Gao, Xiangdong (Faculty of Mechanical and Electrical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Mo, Ling; Katayama, Seiji Source: Advanced Materials
Research, v 314-316, p 932-936, 2011, Advanced Manufacturing Technology
293.Study on real-time compensation RTCP module of five-axis CNC system
Hu, Zehua (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Gao, Weiqiang; Qing, Chaoting; Fang, Chengsheng Source:
Advanced Materials Research, v 317-319, p 1662-1667, 2011, Equipment Manufacturing
Technology and Automation
294.Preface
Chen, Xin (Guangdong University of Technology, China) Source: Advanced Materials Research,
v 317-319, 2011, Equipment Manufacturing Technology and Automation
295.Dielectric
properties
and
diffuse
phase
transition
of
sol-gel
derived
0.94(Bi<inf>0.5</inf>Na<inf>0.5</inf>)TiO<inf>3</inf>-0.06BaTiO<inf>3</inf> ceramics
Cheng, X.F. (School of Physics and Optoelectric Engineering, Guangdong University of
Technology, Guangzhou Higher Education Mega Center, Guangzhou 510006, China); Tang, X.G.;
Ju, S.G.; Jiang, Y.P.; Liu, Q.X. Source: Advanced Materials Research, v 311-313, p 1481-1484,
2011, Advanced Materials and Processes
296.Influence of isothermal annealing on the micro-hardness and friction property in CuZrAl bulk
metallic glass
Tao, Pingjun (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou,
China); Yang, Yuanzheng; Bai, Xiaojun; Wen, Jianguo; Ru, Qiang Source: Advanced Materials
Research, v 146-147, p 615-618, 2011, Advances in Superalloys
297.The topology optimization methods on quasi-static structural
Wu, Xiaohong (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Wang, Lin; Cao, Zhanlun; Yang, Zhijun Source: Advanced Materials
Research, v 204-210, p 1441-1445, 2011, Advanced Research on Industry, Information
System and Material Engineering
298.Study on Guangdong competitiveness of service outsourcing industry based on value chain
Shuangmei, Li (Guangdong University of Technology, GDUT, Guangzhou, China); Qinghua, Lai;
Xiaojie, Wu Source: 2011 International Conference on E-Business and E-Government, ICEE2011
- Proceedings, p 7304-7307, 2011, 2011 International Conference on E-Business and
E-Government, ICEE2011 - Proceedings
299.Fast capsule image segmentation based on linear region growing
Zhu, Zhengtao (School of Information Engineering, Guangdong University of Technology,
Guangzhou, China); Yu, Xiongyi; Huang, Liuqian; Wu, De Source: Proceedings - 2011 IEEE
International Conference on Computer Science and Automation Engineering, CSAE 2011, v 2, p
99-103, 2011, Proceedings - 2011 IEEE International Conference on Computer Science and
Automation Engineering, CSAE 2011
300.The Effect of electrodes' making methods on the electrochemical performance of
Nano-Ni(OH)2
Zheng, H.Z. (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhu, Y.J.; Zhang, Z.J.; Lin, X.R.; Zhou, Z.J.; Ye, X.C.;
Wu, S.G. Source: Applied Mechanics and Materials, v 79, p 123-127, 2011, Chemical,
Mechanical and Materials Engineering
301.Effect of arraying patterns of diamond grits on the grinding forces of mono-layer brazed
diamond tool
Zhang, F.L. (Faculty of Mechanical and Electronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); He, M.J.; Zhou, Y.M.; Huang, H.P.; Fan, J.M. Source:
Key Engineering Materials, v 487, p 116-120, 2011, Advances in Grinding and Abrasive
Technology XVI
302.Seafloor deposition state based geoacoustic model of the South China Sea
Zou, D.P. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou Higher EducationMega Center, No. 100 Waihuan Xi Road, Panyu District, Guangzhou
510006, China); Wu, B.H.; Lu, B. Source: Marine Georesources and Geotechnology, v 29, n 1, p
61-75, January 2011
303.Design of sensorless vector control system for induction motors
Gao, Junli (School of Automation, Guangdong University of Technology, Guangzhou, China);
Chen, Shijun; Li, Guocai Source: Applied Mechanics and Materials, v 58-60, p 2046-2050,
2011, Information Technology for Manufacturing Systems II
304.Microstucture and mechanical properties of semi-solid Sn-58Bi alloy
Hu, Yongjun (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Zhong, Binqiang; Li, Feng; Cheng, Xiaoling; Xiao, Xiaoting; Lin, Yong; He,
Jiannan; He, Yuanchuan; Zheng, Chuchun; Zheng, Yu Chuan; Wu, Yuchi Source: Key Engineering
Materials, v 480-481, p 687-690, 2011, Materials Engineering for Advanced Technologies
305.Experimental research and analysis on micro electrode fabricated by electrochemical etching
Wang, Hebin (Faculty of Mechanical and Electrical Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Guo, Zhongning; Han, Ziping Source: Materials
Science Forum, v 694, p 686-689, 2011, Frontier of Nanoscience and Technology
306.Contourlet-based error-amended sharp edge scheme for image zooming
Cai, Nian (School of Information Engineering, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Haiyuan; Zhang, Nan; Li, Fangzhen Source: Lecture Notes in Computer
Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in
Bioinformatics), v 7003 LNAI, n PART 2, p 418-425, 2011, Artificial Intelligence and
Computational Intelligence - Third International Conference, AICI 2011, Proceedings
307.Effects of Fe/Co ratio on the crystallization behavior in FeCoBSiNb bulk amorphous alloys
Tao, Pingjun (Guangdong University of Technology, Guangzhou 510006, China); Yang,
Yuanzheng; Dong, Zhenjiang; Ren, Yanping Source: Xiyou Jinshu Cailiao Yu Gongcheng/Rare
Metal Materials and Engineering, v 40, n 9, p 1625-1628, September 2011
308.A new adaptive fuzzy controller designed and simulation for ship dynamic positioning
Ye, Baoyu (Guangdong University of Technology, Guangzhou, China); Wang, Qinruo; Xiong,
Jianbin; Zhang, Jinghong Source: 2011 International Conference on Electronics, Communications
and Control, ICECC 2011 - Proceedings, p 48-51, 2011, 2011 International Conference on
Electronics, Communications and Control, ICECC 2011 - Proceedings
309.Velocity tracking control of BLDCM based on generalized predictive control
Cui, Yue-Yuan (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Wang, Yin-He; Hu, Jun; Zhang, Yun Source: Zhongnan Daxue Xuebao (Ziran Kexue
Ban)/Journal of Central South University (Science and Technology), v 42, n SUPPL. 1, p
304-308, September 2011
310.The application of complex spice essential oils on the preservation of pasteuriged minced ham
sausage
Lin, Yahui (Laboratory of Food Additive and Food Safety, Faculty of Chemical Engineering and
Light Industry, Guangdong University of Technology, Guangzhou 510006, China); Wu, Kegang;
Chai, Xianghua; Zhong, Shaoshu Source: Advanced Materials Research, v 317-319, p 258-263,
2011, Equipment Manufacturing Technology and Automation
311.Support-vector-machines learning controller based on small sample sizes for biped robots
Wang, Li-Yang (Faculty of Automation, Guangdong University of Technology, Guangzhou
Guangdong 510006, China); Liu, Zhi; Zhao, Zhi-Guang; Zhang, Yun Source: Kongzhi Lilun Yu
Yingyong/Control Theory and Applications, v 28, n 8, p 1133-1139+1144, August 2011
312.Cognitive radio based hierarchical communications infrastructure for smart grid
Yu, Rong (Institute of Intelligent Information Processing, Guangdong University of Technology
(GDUT), China); Zhang, Yan; Gjessing, Stein; Yuen, Chau; Xie, Shengli; Guizani, Mohsen Source:
IEEE Network, v 25, n 5, p 6-14, September-October 2011, Communication Infrastructures
for Smart Grid
313.Electrical and optical properties of tantalum oxide thin films prepared by reactive magnetron
sputtering
Wei, A.X. (Faculty of Material and Energy, Guangdong University of Technology, 100 Wai Huan
Road, Guangzhou, Guangdong 510006, China); Ge, Z.X.; Zhao, X.H.; Liu, J.; Zhao, Y. Source:
Journal of Alloys and Compounds, v 509, n 41, p 9758-9763, October 13, 2011
314.In situ test study on shear strength properties of weathered silty mudstone
Li, Zhangming (Inst. of Geotech. Engineering, Guangdong University of Technology, Guangzhou
510090, China); Chen, Liangliang; Wu, Feng; Wan, Ling Source: Advanced Materials Research,
v 146-147, p 10-13, 2011, Advances in Superalloys
315.Major process quality control for light seal of piston ring based on KPCA and Elman neural
network
Yang, Jie (School of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Deng, Yaohua Source: Advanced Materials Research, v 314-316, p
397-400, 2011, Advanced Manufacturing Technology
316.Multi-objective stochastic scheduling models for hydrothermal plants based on fuzzy chance
constrained programming
Wu, Jiekang (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
Guangdong Province, China); Tang, Li Source: Zhongguo Dianji Gongcheng Xuebao/Proceedings
of the Chinese Society of Electrical Engineering, v 31, n 25, p 26-34, September 5, 2011
317.Advanced Materials Research: Preface
Li, Lijuan (Guangdong University of Technology, China) Source: Advanced Materials Research,
v 168-170, 2011, Advances in Building Materials
318.Blank shape optimization of square cup deep-drawing under the unilateral constrained
condition
Tan, Li Guang (Faculty of Material And Energy, Guangdong University of Technology,
NO.100,Outer Ring Road, Guangzhou, 510006, China); Xiao, Xiao Ting; Huang, Li Cheng; Chen,
Qiao Yu Source: Advanced Materials Research, v 239-242, p 2365-2369, 2011, Advanced
Materials
319.Global existence and blow-up phenomena for the periodic HunterSaxton equation
parametrized by the speed &kappa; of the Galilean frame
Wei, Xuemei (Faculty of Applied Mathematics, Guangdong University of Technology, 510006
Guangzhou, China); Yin, Zhaoyang Source: Nonlinear Analysis: Real World Applications, v 12,
n 5, p 2616-2624, October 2011
320.Research on corrosion of automobile condenser brazed with novel aluminium alloys
Wang, Guan (School of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Li, Yuanbo; Guo, Zhongning; Zhang, Yongjun Source: Hanjie
Xuebao/Transactions of the China Welding Institution, v 32, n 6, p 25-28, June 2011
321.The research of location about the experimental model of ship using the least square method
Ye, Baoyu (Guangdong University of Technology, 510006, China); Deng, Jiuying; Xiong, Jianbin;
Yang, Na; Wang, Qinruo Source: Proceedings - 3rd International Conference on Measuring
Technology and Mechatronics Automation, ICMTMA 2011,
v 3, p 918-921,
2011,
Proceedings - 3rd International Conference on Measuring Technology and Mechatronics
Automation, ICMTMA 2011
322.Antioxidative activity of protein hydrolysates from Spanish mackerel by alcalase
Xiong, Jun Juan (Department of Food Science and Bioengineering, Faculty of Light and Chemical,
Guangdong University of Technology, 729 East Dongfeng Road, Guangzhou, Guangdong, 510006,
China); Ding, Li Jun; Lai, Xue Ling Source: Advanced Materials Research, v 236-238, p
2890-2893, 2011, Application of Chemical Engineering
323.Research on the glass-forming abilities and magnetic properties of FeCoBSiNb (Y) bulk
amorphous alloys
Tao, Ping-Jun (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Yang, Yuan-Zheng; Dong, Zhen-Jiang; Bai, Xiao-Jun; Chen,
Xian-Zhao; Xie, Zhi-Wei Source: Gongneng Cailiao/Journal of Functional Materials, v 42, n 6,
p 976-979, June 2011
324.Speciation analysis of mercury in water samples using dispersive liquid-liquid
microextraction combined with high-performance liquid chromatography
Gao, Zhongben (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Ma, Xiaoguo Source: Analytica Chimica Acta, v 702,
n 1, p 50-55, 19 September 2011
325.Research of steam boiler using high temperature heat pipe based on metal phase change
materials
Mao, Ling Bo (Faculty of Material and Energy, Guangdong University of Technology(GDUT),
Guangzhou, China); Zhang, Ren Yuan; Li, Feng; Chen, Guan Sheng; Li, Shi Dong; Wang, Chang
Hong Source: Proceedings - International Conference on Computer Distributed Control and
Intelligent Environmental Monitoring, CDCIEM 2011, p 2208-2212, 2011, Proceedings International Conference on Computer Distributed Control and Intelligent Environmental
Monitoring, CDCIEM 2011
326.High-efficiency two-port beam splitter of total internal reflection fused-silica grating
Wang, Bo (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China) Source: Journal of Physics B: Atomic, Molecular and
Optical Physics, v 44, n 6, March 28, 2011
327.Countermeasures of fast location of pipe bursts in Guangzhou based on neural network
technology
Shen, Wang (School of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, China); Tu, Yu.; Wang, Zhihong; Chen, Yuli; Wen, Sun Source: 2011
International Conference on Electric Technology and Civil Engineering, ICETCE 2011 Proceedings, p 5824-5828, 2011, 2011 International Conference on Electric Technology and
Civil Engineering, ICETCE 2011 - Proceedings
328.An improved protocol for optimistic multi-party fair exchange
Liu, Yi (Faculty of Computer, Guangdong University of Technology, Guangzhou, 510006, China);
Hu, Hongli Source: Proceedings of 2011 International Conference on Electronic and Mechanical
Engineering and Information Technology, EMEIT 2011,
v 9, p 4864-4867,
2011,
Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and
Information Technology, EMEIT 2011
329.Electrodeposition and characterization of Cr-Fe-ZrO<inf>2</inf> composite coating from
trivalent chromium chloride electrolyte
He, Xiang Zhu (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Waihuan Xi Road, Guangzhou, Guangdong, 510006, China); Zhou, Xin Li; Huang,
Lin Yuan Source: Advanced Materials Research, v 239-242, p 3056-3061, 2011, Advanced
Materials
330.Reverse engineering at wind turbine blades calculating modal analysis applications
Lu, Nian (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Cheng, Siyuan; Luo, Shaoming; Li, Deyuan; Zhang, Xiangwei
Source: Taiyangneng Xuebao/Acta Energiae Solaris Sinica, v 32, n 1, p 138-142, January 2011
331.Adaptive control designing for a class of uncertain systems based on partition of unity with PI
and estimate gains
Luo, Liang (Faculty of Automation, Guangdong University of Technology, Guangzhou, China);
Wang, Yinhe; Wang, Weichao; Fan, Yongqing; Zhang, Yun Source: Proceedings - 2010
International Conference on Intelligent System Design and Engineering Application, ISDEA 2010,
v 1, p 204-207, 2011, Proceedings - 2010 International Conference on Intelligent System
Design and Engineering Application, ISDEA 2010
332.Synthesis of different nanostructured zirconia by mechanically activated solid state reaction
Zheng, Yuying (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Huang, Huimin; Ji, Wenjin; Guo, Jianwei; Yu, Lin; Ming,
Sun Source: Advanced Materials Research, v 233-235, p 1901-1905, 2011, Fundamental of
Chemical Engineering
333.Dielectric relaxation of Ni<inf>0.5</inf>Zn<inf>0.5</inf>Fe <inf>2</inf>O<inf>4</inf>
ceramics
Chen, D.G. (School of Physics and Optoelectric Engineering, Guangdong University of
Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006, China); Tang, X.G.;
Tong, J.J.; Wu, J.B.; Jiang, Y.P.; Liu, Q.X. Source: Solid State Communications, v 151, n 14-15,
p 1042-1044, July-August 2011
334.Preparation of coated Cu-Ag bimetallic particles
Cao, Xiao-Guo (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Zhang, Hai-Yan; Chen, Yi-Ming Source: Cailiao Kexue yu
Gongyi/Material Science and Technology, v 19, n 2, p 96-99, April 2011
335.A motion estimation algorithm based on interframe differences detection model for virtual
edges detection
Qing, Pan (Faculty of Information Engineering, Guangdong University of Technology, Guangzhou,
China); Nili, Tian; Ruyi, Xu Source: Proceedings - 2011 7th International Conference on Natural
Computation, ICNC 2011, v 2, p 927-931, 2011, Proceedings - 2011 7th International
Conference on Natural Computation, ICNC 2011
336.Study of transmission electromicroscope of polyaluminum chloride
Ning, Xun'an (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Liu, Jingyong; Yang, Zuoyi Source:
Advanced Materials Research, v 168-170, p 1260-1263, 2011, Advances in Building
Materials
337.A study of the flow characteristics in micro-abrasive jets
Fan, J.M. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Li, H.Z.; Wang, J.; Wang, C.Y. Source: Experimental Thermal and
Fluid Science, v 35, n 6, p 1097-1106, September 2011
338.Performance enhancement study of R410A direct evaporation ice-storage system using
divided storage tank
Chen, Xueqing (Guangdong University of Technology, Guangzhou 510006, China); Chen, Ying;
Shi, Yongkang Source: Proceedings - International Conference on Computer Distributed Control
and Intelligent Environmental Monitoring, CDCIEM 2011, p 1607-1610, 2011, Proceedings International Conference on Computer Distributed Control and Intelligent Environmental
Monitoring, CDCIEM 2011
339.Melt grafting behavior of maleic anhydride onto polypropylene using 1-hexadecene as second
monomer
Lei, Caihong (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Li, Shanliang; Huang, Weiliang; Chen, Dahua; Wu, Bo Source: Gaofenzi Cailiao
Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, v 27, n 4, p 95-98, April
2011
340.Influence of annealing and europium-doping on the structure and optical properties of ZnO
thin films grown on quartz substrate by magnetron sputtering
Dai, Q.Q. (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Waihuanxi road No.100, Guangzhou, 510006, China); Luo, L.; Huang, F.Y.; Xiong,
D.P.; Tang, X.G.; Chen, J. Source: Materials Science Forum, v 687, p 667-672, 2011,
Functional and Electronic Materials
341.Study on intelligent extracting algorithm of zipper teeth from image
Zhong, Yingchun (Facaulty of Automation, Guangdong University of Technology, Guangzhou
City, Guangdong Province, China); Chen, Jianfei; Gao, Junli Source: Advanced Materials
Research, v 255-260, p 2248-2252, 2011, Advances in Civil Engineering
342.Retrieval algorithm of images and its applications in recognition of metallographic pictures
Ling, Ling (College of Mechatronic Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Xin, Ling Wei Source: Advanced Materials Research, v 291-294, p
2356-2359, 2011, Materials Processing Technology
343.Enhanced red emission in Sr<inf>2</inf>CeO<inf>4</inf>: Eu³ by charge
compensation
Mu, Zhongfei (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Chen, Li; Wang, Xiaojuan Source: Journal of
the Electrochemical Society, v 158, n 10, p J287-J290, 2011
344.Formal methods for aspect-oriented specification of cyber physical systems
Zhang, Lichen (Faculty of Computer Science and Technology, Guangdong University of
Technology, 510090 Guangzhou, China) Source: Communications in Computer and Information
Science, v 215 CCIS, n PART 2, p 316-322, 2011, Advances in Computer Science,
Environment, Ecoinformatics, and Education - International Conference, CSEE 2011, Proceedings
345.Wire electrical discharge machining (Wire EDM) cutting of flexures for a rotary flexural
bearing fabrication
Luo, Hongping (School of Mechatronics Engineering, Guangdong University of Technology,
China); Zhou, Zhixiong; Zhang, Yongjun; Guo, Zhongning Source: Advanced Materials Research,
v 314-316, p 1727-1733, 2011, Advanced Manufacturing Technology
346.Experimental research of electrochemical mechanical polishing(ECMP) for Micro tool
electrode
Guo, Shuai (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Guo, Z.N.; Luo, Hongping; Gu, Wencai Source: Advanced Materials
Research, v 314-316, p 1846-1850, 2011, Advanced Manufacturing Technology
347.Study on the preparation of Ni-P-TiO<inf>2</inf> coatings by electroless plating and its
photocatalytic properties
Xiong, Liang (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Guoqing; Pan, Huageng Source: Advanced Materials Research, v
311-313, p 319-322, 2011, Advanced Materials and Processes
348.A new hybrid routing protocol in WSNs
Liu, Guangcong (Faculty of Computer, Guangdong University of Technology, Guangzhou, China);
Zhang, Hua; Lei, Fangjie; Wei, Dongli Source: 2011 IEEE International Conference on Cyber
Technology in Automation, Control, and Intelligent Systems, CYBER 2011, p 175-180, 2011,
2011 IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent
Systems, CYBER 2011
349.High resolution ITO lithography using excimer laser for flat-panel display fabrication
Wang, Xinxing (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhou, Jinyun; Lei, Liang; Lin, Qinghua; Shi, Ying; Mei,
Longhua Source: Advanced Materials Research, v 314-316, p 1910-1913, 2011, Advanced
Manufacturing Technology
350.Direct adaptive fuzzy control with compressors and limiters for a class of uncertain nonlinear
systems
Fan, Yong-Qing (Faculty of Automation, Guangdong University of Technology, Guangzhou,
510006, China); Wang, Yin-He; Hu Jun; Cui, Yue-Yuan; Zhang, Yun Source: Proceedings of the
30th Chinese Control Conference, CCC 2011, p 324-329, 2011, Proceedings of the 30th
Chinese Control Conference, CCC 2011
351.Uniform irradiation of adjustable target spots in high-power laser driver
Jiang, Xiujuan (School of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Li, Jinghui; Li, Huagang; Li, Yang; Lin, Zunqi Source: Applied
Optics, v 50, n 27, p 5213-5220, September 20, 2011
352.Review on grid short-term load forecasting methods based on RBF neural network
Peng, Xian-Gang (Faculty of Automation, Guangdong University of Technology, Guangzhou
510006, China); Hu, Song-Feng; L&#252;, Da-Yong Source: Dianli Xitong Baohu yu
Kongzhi/Power System Protection and Control, v 39, n 17, p 144-148, September 1, 2011
353.School score mining: First step
Rao, Dongning (Faculty of Computer, Guangdong University of Technology, Guangzhou, China);
Jiang, Zhihua Source: 2011 IEEE 3rd International Conference on Communication Software and
Networks, ICCSN 2011, p 36-40, 2011, 2011 IEEE 3rd International Conference on
Communication Software and Networks, ICCSN 2011
354.Preparation of water-based no-clean flux for high temperature lead-free solder
Hao, Zhifeng (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Wu, Qingqing; Sun, Ming; Yu, Jian; Guo, Yipeng; Rao,
Yao Source: Advanced Materials Research, v 314-316, p 1112-1116, 2011, Advanced
Manufacturing Technology
355.Influence of abrasive on planarization grinding based on the cluster magnetorheological effect
Yan, Qiusheng (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Yan, Jiewen; Lu, Jiabin; Gao, Weiqiang; Li, Min Source: Advanced Materials Research,
v 325, p 542-547, 2011, Advances in Abrasive Technology XIV
356.357.Composite tools design for electrolytic magnetic abrasive finishing process with FEM
Liu, G.Y. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Guo, Z.N.; Li, Y.B.; Liu, J.W. Source: Advanced Materials Research, v 325,
p 536-541, 2011, Advances in Abrasive Technology XIV
358.The influence of electroless-silver coated cenosphere powders on the electromagnetic
shielding interference effectiveness and mechanical properties of the silicone rubber
Hu, Yongjun (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Haiyan; Cheng, Xiaoling; Li, Feng; Chen, Tianli Source: Advanced
Materials Research, v 152-153, p 1360-1365, 2011, New Materials and Advanced Materials
359.The super-capacitor properties of aligned carbon nanotubes array prepared by radio frequency
plasma-enhanced hot filament chemical vapor deposition
Chen, Yiming (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 51006, China); Zhang, Haiyan Source: Advanced Materials Research, v 150-151, p
1560-1563, 2011, Advances in Composites
360.Numerical simulation of square cup deep-drawing process under the different constraint
degrees condition
Xiao, Xiao Ting (Faculty of Material And Energy, Guangdong University of Technology, No. 100
Waihuan Xi Road, Panyu District, Guangzhou, 510006, China); Huang, Li Cheng; Liao, Yi Juan
Source: Advanced Materials Research, v 239-242, p 2225-2228, 2011, Advanced Materials
361.Mechanism of resistance microwelding of insulated copper wire to phosphor bronze sheet
Mo, Binghua (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Guo, Zhongning; Li, Yuanbo; Huang, Zhigang; Wang, Guan Source:
Materials Transactions, v 52, n 6, p 1252-1258, June 2011
362.Preparation of exfoliated polyethylene/clay nanocomposites at high clay content
Hong, Haoqun (College of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Zhang, Haiyan; He, Hui; Jia, Demin Source: Advanced Materials
Research, v 150-151, p 561-564, 2011, Advances in Composites
363.Effect of load on linear reciprocating sliding friction and wear behavior in Zr-based bulk
metallic glass
Tao, Pingjun (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou,
China); Yang, Yuanzheng; Bai, Xiaojun; Ru, Qiang; Xie, Zhiwei Source: Advanced Materials
Research, v 152-153, p 1905-1908, 2011, New Materials and Advanced Materials
364.Optimal design method for cam profile based on mechanism dynamics and control system
co-simulation and optimization
Yang, Zhi-Jun (College of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Kelly, Robert; Chen, Xin; He, Jie Source: Jilin Daxue Xuebao
(Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), v 41, n 1, p
149-154, January 2011
365.Numerical simulation and deformation research for cold enlarging tube diameter
Kuang, Wei Hua (Faculty of Materials and Energy, Guangdong University of Technology, 100
Waihuan Xi Road, Guangzhou, 510006, China) Source: Materials Science Forum, v 675 677, p
715-718, 2011, Advanced Material Science and Technology
366.Palladium-based catalyst without interlayer film prepared by electroless plating for catalytic
combustion of toluene
Li, Yong Feng (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, 100 Waihuan Xi Road, Guangzhou, Guangdong, 510006, China); Li, Yu; Huang, Yan
Ting; Yu, Lin; Yu, Qian; Mai, Rong Jian Source: Advanced Materials Research, v 197-198, p
957-961, 2011, New and Advanced Materials
367.Research on MFBD modeling method for a gantry machining center beam components
Yang, Q.J. (Faculty Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Li, D.N.; Kong, L.L.; Li, K. Source: Advanced Materials Research,
v 188, p 487-492, 2011, High Speed Machining
368.Machine learning based teaching quality evaluation
Zhang, Gang (Faculty of Automation, GuangDong University of Technology, GuangZhou, China);
Yin, Jian; Cheng, Liang-Lun; Wang, Chun-Ru Source: Advanced Materials Research, v 271-273,
p 1451-1454, 2011, Advanced Materials and Information Technology Processing, AMITP
2011
369.Ultra smooth polishing research based on the cluster magnetorheological effect
Wu, Z.C. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Yan, Q.S.; Bai, Z.W.; Kong, L.Y.; Chai, J.F. Source: Key Engineering Materials, v 487,
p 283-288, 2011, Advances in Grinding and Abrasive Technology XVI
370.Self-assembled supramolecular architecture with alternating porphyrin and phthalocyanine,
bonded by hydrogen bonding and &pi;-&pi; Stacking
Tong, Shan-Ling (College of Light Industry and Chemical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhang, Jing; Yan, Yan; Hu, Sheng; Yu, Jian; Yu, Lin
Source: Solid State Sciences, v 13, n 11, p 1967-1971, November 2011
371.Preparation of poly[poly(ethylene glycol) diacrylate] microspheres by dispersion
polymerization in polysaccharide solution
Tan, Guo-Xin (Institute of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Liao, Jing-Wen; Ning, Cheng-Yun; Zhang, Lin Source:
Gongneng Cailiao/Journal of Functional Materials, v 42, n SUPPL. 3, p 398-400+404, June
2011
372.A big power THz wave resonant cavity
Zhang, Huafu (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou, 510006, Guangdong, China); Lin, Fumin Source: Proceedings of 2011
Cross Strait Quad-Regional Radio Science and Wireless Technology Conference, CSQRWC 2011,
v 1, p 559-562, 2011, Proceedings of 2011 Cross Strait Quad-Regional Radio Science and
Wireless Technology Conference, CSQRWC 2011
373.Influence of different dispersants on the dispersion property of nano-aluminium powders
Song, Lingli (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou,
Guangdong, 510090, China); Zhang, Renyuan; Mao, Lingbo; Zhu, Wenjie; Zheng, Miaoyan
Source: Applied Mechanics and Materials, v 71-78, p 122-125, 2011, Frontiers of Green
Building, Materials and Civil Engineering
374.A new conformer of indium germanate InGe<inf>3</inf>O<inf>7.5</inf>(en):
Conformational polymorphism in germanate family
Pan, Chun-Yang (Faculty of Light Industry and Chemical Engineering, Guangdong University of
Technology, Ghuangzhou 510006, China); Yang, Guo-Yu Source: Dalton Transactions, v 40, n
44, p 11693-11695, November 28, 2011
375.The design of multi-function CNC ultrasonic machine tools
Lian, Haishan (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Guo, Z.N.; Zhao, Wenfeng Source: 2011 International Conference on
Electronics, Communications and Control, ICECC 2011 - Proceedings, p 1102-1105, 2011,
2011 International Conference on Electronics, Communications and Control, ICECC 2011 Proceedings
376.A bivector rotation approach to state feedback stabilization of linear time-invariant systems
with input time delay
Zeng, Qi-Jie (Faculty of Automation, Guangdong University of Technology, Guangzhou
Guangdong, China); Zhang, Yun; Tang, Bin Source: 2011 International Conference on Electronics,
Communications and Control, ICECC 2011 - Proceedings, p 1201-1205, 2011, 2011
International Conference on Electronics, Communications and Control, ICECC 2011 Proceedings
377.Observation on long afterglow of Tb³⁺ in CaWO<inf>4</inf>
Wu, Haoyi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Waihuan Xi Road, No.100, Guangzhou 510006, China); Hu, Yihua; Kang, Fengwen;
Chen, Li; Wang, Xiaojuan; Ju, Guifang; Mu, Zhongfei Source: Materials Research Bulletin, v 46,
n 12, p 2489-2493, December 2011
378.Analytical expressions for doped polycrystalline silicon thin-film transistors in
above-threshold regime consistent with Pao-Sah model considering trapped charge effect
He, Hongyu (Faculty of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zheng, Xueren Source: IEEE Transactions on Electron
Devices, v 58, n 12, p 4324-4332, December 2011
379.Walking pattern optimization based on particle swarm optimization for biped robot
Fu, Genping (School of Automation, Guangdong University of Technology, Guangzhou 510090,
China); Yang, Yimin; Huang, Chunlin Source: Huazhong Keji Daxue Xuebao (Ziran Kexue
Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), v
39, n SUPPL. 2, p 355-358, November 2011
380.A distributed processing method for design patent retrieval system
Cao, Jiang-Zhong (School of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Zhu, Jian-Wei; Wang, Xian-Wei; Dai, Qing-Yun Source: Lecture
Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and
Lecture Notes in Bioinformatics), v 6987 LNCS, n PART 1, p 166-174, 2011, Web
Information Systems and Mining - International Conference, WISM 2011, Proceedings
381.The structure and luminescence properties of long afterglow phosphor Y
<inf>3-x</inf>Mn<inf>x</inf>Al<inf>5-x</inf>Si<inf>x</inf>O<inf>12</inf>
Mu, Zhongfei (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Wang, Yinhai; Wu, Haoyi; Fu, Chujun; Kang,
Fengwen Source: Journal of Luminescence, v 131, n 4, p 676-681, April 2011
382.An Empirical Research on the influence of psychological contract violations on customer
complaint behavior
Faliang, Tang (School of Management, Guangdong University of Technology, Guangzhou,
China) Source: BMEI 2011 - Proceedings 2011 International Conference on Business
Management and Electronic Information, v 2, p 770-776, 2011, BMEI 2011 - Proceedings
2011 International Conference on Business Management and Electronic Information
383.Design and implementation of technology data sharing platform with web services
Dong-Ping, Liu (Institute of Computer, GuangDong University of Technology, Guang-zhou,
China); Li, Chen; Rui, Chen; Jie, Jin Source: Communications in Computer and Information
Science, v 232 CCIS, n PART 2, p 303-311, 2011, Innovative Computing and Information International Conference, ICCIC 2011, Proceedings
384.Modeling and optimization of a utility system containing multiple extractions steam turbines
Luo, Xianglong (School of Material and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Zhang, Bingjian; Chen, Ying; Mo, Songping Source: Energy, v 36,
n 5, p 3501-3512, May 2011
385.A maya geometry slices generation method for volumetric 3D display
Chen, Heen (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); He, Hanwu; He, Zhiyuan Source: Advanced Materials Research, v
314-316, p 102-107, 2011, Advanced Manufacturing Technology
386.Preparation of biodiesel from tung oil catalyzed by sulfonic-functional Br&#244;nsted acidic
ionic liquids
Zhou, Jianhui (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, Guangdong, China); Lu, Yujing; Huang, Baohua; Huo, Yanping;
Zhang, Kun Source: Advanced Materials Research,
Advanced Manufacturing Technology
v 314-316, p 1459-1462,
2011,
387.The development of micro abrasive waterjet machining technology
Luo, W.S. (Guangdong University of Technology, 510090 Guangzhou, China); Wang, C.Y.; Wang,
J.; Song, Y.X. Source: Advanced Materials Research, v 188, p 733-738, 2011, High Speed
Machining
388.Synthesis and spectral properties of pH fluorescent probes based on distyryl ketone
Xu, Xue Tao (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, No. 100, Waihuanxi Road, Panyu District, Guangzhou, 510006, China); Zhang, Kun;
Du, Zhi Yun; Lu, Yu Jing; Zhang, Rui Rui; Zhu, Hua Source: Advanced Materials Research, v
236-238, p 1143-1146, 2011, Application of Chemical Engineering
389.Study on the optimum preparation process conditions of Iron Oxide Coated Sand
Li, Dongmei (Guangdong University of Technology, Guangdong, Guangzhou, 510006, China);
Huang, Hui; Ye, Tingjin; Huang, Mingzhu; Ren, Yi; Liu, Chunliu; He, Na Source: Proceedings International Conference on Computer Distributed Control and Intelligent Environmental
Monitoring, CDCIEM 2011, p 1823-1826, 2011, Proceedings - International Conference on
Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2011
390.Study on the chemical modification of titanium-doped silicone using hydroxyl-terminated
saturated polyester
Hao, Zhi Feng (College of Chemical Engineering and Light Industry, Guangdong University of
Technology, 729 East Dongfeng Road, Guangzhou, Guangdong, 510006, China); Wang, Xue Mei;
Hou, Hong Xia; Wu, Ya Hong; Li, Hua Gong; Yu, Jian Source: Advanced Materials Research, v
239-242, p 2817-2821, 2011, Advanced Materials
391.Cutting forces of PCB supported hole
Huang, L.X. (Guangdong University of Technology, Guangdong, China); Wang, C.Y.; Yang, L.P.;
Zheng, L.J.; Song, Y.X. Source: Advanced Materials Research, v 188, p 435-440, 2011, High
Speed Machining
392.Adaptive least squares support vector machines filter for hand tremor canceling in
microsurgery
Liu, Zhi (Department of Automation, Guangdong University of Technology, 510006 Guangzhou,
China); Wu, Qihang; Zhang, Yun; Chen, C. L. Philip Source: International Journal of Machine
Learning and Cybernetics, v 2, n 1, p 37-47, March 2011
393.Pre-processing techniques for on-line capsule inspection based on machine vision
Zhengtao, Zhu (School of Information Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Liuqian, Huang; Xiongyi, Yu Source: Proceedings - 4th International
Conference on Intelligent Computation Technology and Automation, ICICTA 2011, v 2, p
653-656, 2011, Proceedings - 4th International Conference on Intelligent Computation
Technology and Automation, ICICTA 2011
394.Stochastic scheduling algorithm for multiple mould and die manufacturing projects and its
simulation
Sha-Qing, Zhang (School of Management, Guangdong University of Technology, Guangzhou,
China); Xin-Du, Chen Source: 2011 International Conference on E-Business and E-Government,
ICEE2011 - Proceedings, p 6320-6325, 2011, 2011 International Conference on E-Business
and E-Government, ICEE2011 - Proceedings
395.Testing and analysis of high-speed camera for droplet transition
Wen, Yuan Mei (Guangdong University of Technology, Guangzhou 510006, China); Huang, Shi
Sheng; Liu, Gui Xiong Source: Advanced Materials Research, v 271-273, p 79-83, 2011,
Advanced Materials and Information Technology Processing, AMITP 2011
396.Fire performance of highstrength concrete reinforced with recycled rubber particles
Li, L.-J. (Guangdong University of Technology, Guangzhou, China); Guo, Y.-C.; Xie, W.-F.; Deng,
J.; Liu, F. Source: Magazine of Concrete Research, v 63, n 3, p 187-195, March 1, 2011
397.Bisimilarity control of partially observed nondeterministic discrete event systems and a test
algorithm
Liu, Fuchun (Faculty of Computer, Guangdong University of Technology, Guangzhou, 510006,
China); Lin, Hai; Dziong, Zbigniew Source: Automatica, v 47, n 4, p 782-788, April 2011
398.Study on polypropylene matrix composites filled with glass fiber recycled from waste printed
circuit board
Liang, Haifeng (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, China); Sun, Shuiyu; Long, Laishou; Li, Shenyong; Zhu, Zao; Liu,
Jingyong; Yang, Fan; Zhong, Sheng Source: Proceedings - International Conference on Computer
Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2011, p 1764-1768,
2011, Proceedings - International Conference on Computer Distributed Control and Intelligent
Environmental Monitoring, CDCIEM 2011
399.Elucidation of welding stability based on keyhole configuration during high-power fiber laser
welding
Gao, Xiangdong (Faculty of Electromechanical Engineering, Guangdong University of
Technology, Higher Education Mega Center, No. 100 West Waihuan Road, Panyu District,
Guangzhou 510006, China); Wen, Qian; Katayama, Seiji Source: Advanced Materials Research,
v 314-316, p 941-944, 2011, Advanced Manufacturing Technology
400.Influences of Nd³⁺ doping on structure and electrochemical performance of
layered Li<inf>1.05</inf>V<inf>3</inf>O<inf>8</inf>
Liu, Liying (School of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Haiyan; Zhai, Yuchun; Tian, Yanwen Source: Journal of Rare Earths, v
29, n 2, p 150-154, February 2011
401.Preparation and properties of Polyvinyl chloride/Nitrile butadiene rubber/Barium sulfate
composites
Wu, Hao (Guangdong University of Technology, Guangzhou, Guangdong Province, China); Cao,
Youming Source: Advanced Materials Research, v 311-313, p 335-338, 2011, Advanced
Materials and Processes
402.Density functional theory calculations of arsenic(III) structures on perfect Tio<inf>2</inf>
anatase (1 0 1) surface
Yu, Lin (Department of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Liu, Yue; Wei, Zhigang; Diao, Guiqiang; Sun, Ming; Yu,
Qian Source: Advanced Materials Research, v 233-235, p 491-494, 2011, Fundamental of
Chemical Engineering
403.The design of carton samplemaker's embedded numerical control system based on windows
CE
Liu, Jian Qun (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Xu, Dong; Wu, Ji Rong; Li, Xiao; Jian, Huang Source: Advanced
Materials Research, v 211-212, p 330-335, 2011, Mechatronics and Intelligent Materials
404.Hierarchical linear analysis of the factors affecting C2C online bids
Zhang, Yanlin (School of Management, Guangdong University of Technology, Guangzhou, China);
Li, Li Source: 2011 International Conference on E-Business and E-Government, ICEE2011 Proceedings, p 1335-1339,
2011,
2011 International Conference on E-Business and
E-Government, ICEE2011 - Proceedings
405.The corrosion resistance properties and precipitate of common artificial reef materials
Chen, Hai Yan (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, 510006, China); Li, Wei; Chen, Pi Mao; Zhang, Hai Yan; Lin, Jie Xiang Source:
Advanced Materials Research, v 197-198, p 8-12, 2011, New and Advanced Materials
406.Study on knowledge sharing in supply chain
Song-Qing, Li (School of Management, Guangdong University of Technology, Guangzhou,
China) Source: 2011 International Conference on E-Business and E-Government, ICEE2011 Proceedings, p 2631-2634,
2011,
2011 International Conference on E-Business and
E-Government, ICEE2011 - Proceedings
407.A useful curve fitting method for concrete uniaxial compressive experiment data
Jin, Chong (College of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Wang, Hong; Xia, Xiao-Zhou Source: Advanced
Materials Research, v 291-294, p 1015-1020, 2011, Materials Processing Technology
408.Analytical drain current model for amorphous IGZO thin-film transistors in above-threshold
regime
He, Hongyu (Faculty of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zheng, Xueren Source: Journal of Semiconductors, v
32, n 7, July 2011
409.A definition on basic structure of enterprise management system
Bian, Yungang (Research Institute of System Engineering, Guangdong University of Technology,
Guangzhou, China); Guo, Kaizhong Source: 2011 2nd International Conference on Artificial
Intelligence, Management Science and Electronic Commerce, AIMSEC 2011 - Proceedings, p
907-910, 2011, 2011 2nd International Conference on Artificial Intelligence, Management
Science and Electronic Commerce, AIMSEC 2011 - Proceedings
410.The crystallization characteristics of carbon nanotubes/Pb-Sn composite coatings
Hu, Zheng Xi (Faculty of Material and Energy, Guangdong University of Technology, Wai Huang
West Road, Guang Zhou, 510006, China); Jie, Xiao Hua; Lu, Guo Hui Source: Advanced
Materials Research, v 189-193, p 300-305, 2011, Manufacturing Process Technology
411.Electrochemical performance of multi-element doped &alpha;-nickel hydroxide prepared by
supersonic co-precipitation method
Zhang, Z.J. (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhu, Y.J.; Bao, J.; Lin, X.R.; Zheng, H.Z. Source:
Journal of Alloys and Compounds, v 509, n 25, p 7034-7037, June 23, 2011
412.Thermal analysis of high speed built-in spindle by finite element method
Ma, P. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 51006, China); Zhou, B.; Li, D.N.; Xiao, S.H.; Wang, C.Y. Source: Advanced
Materials Research, v 188, p 596-601, 2011, High Speed Machining
413.Experimental and theoretical study on transition metal ion doped TiO <inf>2</inf>
Zhong, Xuechun (Faculty of Light Industry and Chemical Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Pan, Zhanchang; Wei, Zhigang; Xie,
Shuguang; Cheng, Zhenjun; Xiao, Chumin Source: Advanced Materials Research, v 233-235, p
2219-2222, 2011, Fundamental of Chemical Engineering
414.Study of problems and corrective actions of urban drainage network
Qiu, Hongrong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangdong, China); Luo, Jianzhong; Zheng, Guohui; Liu, Luexuan Source: 2011
International Conference on Electric Technology and Civil Engineering, ICETCE 2011 Proceedings, p 1561-1564, 2011, 2011 International Conference on Electric Technology and
Civil Engineering, ICETCE 2011 - Proceedings
415.Reverse atom transfer radical polymerization of N-vinylpyrrolidone
Xiao, Chenggui (Faculty of Light and Chemical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Yi, Guobin; Xiao, Hong; Huang, Yunwei Source:
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, v 27, n 6,
p 18-21, June 2011
416.Dye-sensitized solar cells with TiO<inf>2</inf> nanoparticle/nanowire composites
photoanode
Zhao, Wang (School of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Wei, Ai-Xiang; Liu, Jun; Ge, Zeng-Xian; Liu, Chuan-Biao Source: Gongneng
Cailiao/Journal of Functional Materials, v 42, SUPPL. JUNE, p 431-434, June 2011
417.Influences of deposition pressure on the structure and properties of MgO thin films prepared
by cathodic vacuum arc deposition
Zhu, Dao-Yun (Experiment Teaching Department, Guangdong University of Technology,
Guangzhou 510006, China); Zheng, Chang-Xi; Wang, Ming-Dong; Chen, Di-Hu; He, Zhen-Hui
Source: Gongneng Cailiao/Journal of Functional Materials, v 42, n 7, p 1316-1319, July 2011
418.Implementing Iterative Learning Control to reduce torque ripple of permanent magnet
synchronous machine
Huang, Zhao (Automation College, Guangdong University of Technology, Canton, China); Cheng,
Hanxiang Source: Advanced Materials Research, v 301-303, p 1676-1681, 2011, Advanced
Measurement and Test
419.Dielectric
relaxation
in
(Ba<inf>0.7</inf>Ca<inf>0.3</inf>)TiO
<inf>3</inf>-Ba(Zr<inf>0.2</inf>Ti<inf>0.8</inf>)O<inf>3</inf> ceramics
Ju, S.G. (School of Physics and Optoelectric Engineering, Guangzhou Higher Education Mega
Center, Guangdong University of Technology, Guangzhou 510006, China); Tang, X.G.; Wu, J.B.;
Jiang, Y.P.; Liu, Q.X. Source: Advanced Materials Research, v 287-290, p 503-508, 2011,
Applications of Engineering Materials
420.Influence of laser wavelength on target irradiation uniformity
Jiang, Xiujuan (School of Information Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Shi, Zhiwei; Zhou, Shenlei; Lin, Zunqi Source: Optik, v 122, n 4, p
317-320, February 2011
421.Study on electrodeposition of Ni-graphite composite coatings in sulfamate bath
He, Xiangzhu (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou. Guangdong. 510006, China); Zhang, Xiaowei; Zhou, Xinli; Fu, Zhihong
Source: Advanced Materials Research, v 150-151, p 1546-1550, 2011, Advances in
Composites
422.Wind speed forecasting with artificial neural networks model
Huang, Xiaohua (Experiment Teaching Department, Guangdong University of Technology,
Guangzhou 510006, China); Li, Deyuan; Lv, Wenge; Cheng, Siyuan Source: Taiyangneng
Xuebao/Acta Energiae Solaris Sinica, v 32, n 2, p 193-197, February 2011
423.High temperature oxidation behavior of (Ti, Al) C ceramic coatings on carbon steel prepared
by electrical discharge coating in kerosene
Li, Guoliang (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou,
Guangdong, 510006, China); Jie, Xiaohua; He, Ling Source: Advanced Materials Research, v
189-193, p 186-192, 2011, Manufacturing Process Technology
424.The gray solar heat reflecting coating with insulating heat and lowering temperature
Guo, Qingquan (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou University City 510006, China); Wang, Xiaofeng; Li, Daguang; He,
Xiangzhu; Chen, Huanqin Source: Advanced Materials Research, v 250-253, p 340-344, 2011,
Advanced Building Materials
425.Preparation of sorbents with lignosulfonate
Liu, Qianjun (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Liu, Guoguang; Li, Zhiping; Huang, Hongchi; Lin,
Qintie Source: 5th International Conference on Bioinformatics and Biomedical Engineering,
iCBBE 2011, 2011, 5th International Conference on Bioinformatics and Biomedical
Engineering, iCBBE 2011
426.Research on a real-time fault tolerant time synchronization algorithm for GSM-R wireless
sensor networks based on network materials
Huang, Xiaowu (Guangdong University of Technology, Guangzhou, China); Wang, Guitang; Liu,
Wenjuan; Wang, Feng Source: Applied Mechanics and Materials, v 63-64, p 905-910, 2011,
Advanced Research on Mechanical Engineering, Industry and Manufacturing Engineering
427.Quick start and stop welding head body optimal control path planning
Wu, Xiaohong (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Zou, Yunping; Cao, Zhanlun; Yang, Zhijun Source: Applied
Mechanics and Materials, v 63-64, p 232-236, 2011, Advanced Research on Mechanical
Engineering, Industry and Manufacturing Engineering
428.Structure
and
luminescence
properties
of
Sr<inf>4</inf>Al<inf>14</inf>O<inf>25</inf>:Eu²⁺,
Dy³⁺
by
Ba²⁺ substitution
Xie, Wei (Guangdong University of Technology, Guangzhou 510006, China); Wang, Yinhai; Hu,
Yihua; Wu, Haoyi; Deng, Liuyong Source: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal
Materials and Engineering, v 40, n 5, p 921-926, May 2011
429.Design and study of professional PWM core based on FPGA
Tian, Guihong (Guangdong University of Technology, Guangdong 510006, China); Guo,
Zhongning; Li, Yuanbo; Liu, Wei Source: Lecture Notes in Electrical Engineering, v 98 LNEE, n
VOL. 2, p 305-311, 2011, Electrical Engineering and Control - Selected Papers from the 2011
International Conference on Electric and Electronics, EEIC 2011
430.Microstructure and mechanical properties of Sn-Bi alloy treated in the semi-solid state by
mechanical stirring process
Li, Feng (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Hu, Yongjun; Cheng, Xiaoling; Xiao, Xiaoting Source: Advanced Materials
Research, v 150-151, p 1768-1771, 2011, Advances in Composites
431.The design of ultrasound-aided electro-spark deposition device and experimental investigation
Deng, Yu (Guangdong University of Technology, Higher Education Mega Center, No. 100
Waihuanxi Road, Guangzhou 510006, China); Guo, Zhongning; Huang, Zhigang; Nie, Ling; Li,
Yongyong Source: Advanced Materials Research, v 154-155, p 763-768, 2011, Materials
Processing Technologies
432.The compressive and flexural deformation of rubberized concrete
Zheng, Wanhu (Guangdong University of Technology, Guangzhou, 510000, China); Li, Lijuan;
Liu, Feng Source: Advanced Materials Research, v 168-170, p 1788-1791, 2011, Advances
in Building Materials
433.Virtual product development and reliability design of camera cover
Kuang, Weihua (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); Chen, Lisi Source: Key Engineering Materials, v 460-461, p 40-43, 2011,
Components, Packaging and Manufacturing Technology
434.Effects of different forms inorganic nitrogen on aqueous photolysis of fipronil
Zhang, Xiangdan (Guangdong University of Technology, Guangzhou, Guangdong, 510006,
China); Liu, Guoguang; Yao, Kun; Lu, Wenying Source: Proceedings - 3rd International
Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2011, v 2, p
11-14, 2011, Proceedings - 3rd International Conference on Measuring Technology and
Mechatronics Automation, ICMTMA 2011
435.Effect of cold deformation on the corrosion behaviour of Mn-containing aluminium alloy tube
Wang, Guan (Institute of Mechatronics, Guangdong University of Technology, Guangzhou
510006, China); Lin, Xiaoqun Source: Jinshu Xuebao/Acta Metallurgica Sinica, v 47, n 3, p
361-366, March 2011
436.Luminescence and energy transfer of Mn²⁺ and Tb³⁺ in
Y<inf>3</inf>Al<inf>5</inf>O<inf>12</inf> phosphors
Mu, Zhongfei (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Wu, Haoyi; Fu, Chujun; Kang, Fengwen
Source: Journal of Alloys and Compounds, v 509, n 22, p 6476-6480, June 2, 2011
437.QoS specification for cyber-physical systems
Zhang, Lichen (Faculty of Computer Science and Technology, Guangdong University of
Technology, 510090 Guangzhou, China) Source: Communications in Computer and Information
Science, v 215 CCIS, n PART 2, p 329-334, 2011, Advances in Computer Science,
Environment, Ecoinformatics, and Education - International Conference, CSEE 2011, Proceedings
438.The modeling and solution of knowledge reason for intelligent traffic management systems
based on error matrix equation
Min, Xilin (School of Management, Guangdong University of Technology, Guangzhou, China);
Guo, Kaizhong; Huang, Jize Source: 2011 International Conference on Computer Science and
Service System, CSSS 2011 - Proceedings, p 1827-1830, 2011, 2011 International Conference
on Computer Science and Service System, CSSS 2011 - Proceedings
439.Cycle embedding in star graphs with more conditional faulty edges
Cheng, Dongqin (Faculty of Applied Mathematics, Guangdong University of Technology,
Guangzhou 510006, China); Guo, Dachang Source: Applied Mathematics and Computation, v
218, n 7, p 3856-3867, December 1, 2011
440.Finite characteristic ratio theory model analysis for the thin rock pillar of a twin tunnel
Li, Zhangming (Center of Geotechnical Engineering, Guangdong University of Technology,
Guangzhou, China); Wu, Feng Source: Applied Mechanics and Materials, v 71-78, p 4985-4988,
2011, Frontiers of Green Building, Materials and Civil Engineering
441.Dye-sensitized solar cells with TiO<inf>2</inf> nanoparticle/nanowire composites
photoanode
Zhao, Wang (School of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Wei, Ai-Xiang; Liu, Jun; Ge, Zeng-Xian; Liu, Chuan-Biao Source: Gongneng
Cailiao/Journal of Functional Materials, v 42, n SUPPL. 3, p 430-434, June 2011
442.A method of second wavelet transform automated threshold for partial discharge signal
extraction
Luo, Hongxia (Huali College, Guangdong University of Technology, Guangzhou, Guangdong,
511325, China); Zhang, Xuefeng Source: Proceedings of the 2011 2nd International Conference
on Digital Manufacturing and Automation, ICDMA 2011, p 42-45, 2011, Proceedings of the
2011 2nd International Conference on Digital Manufacturing and Automation, ICDMA 2011
443.Preparation and properties of Zn<inf>1-x</inf>Mg<inf>x</inf>O thin films by radio
frequency magnetron sputtering method
Wang, Yan-Li (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Yang, Yuan-Zheng; Gao, Zhen-Jie; Xie, Zhi-Wei; Chen, Xian-Chao; He, Yu-Ding
Source: Rengong Jingti Xuebao/Journal of Synthetic Crystals, v 40, n 5, p 1261-1265, October
2011
444.Robust segmentation method to illumination variation for color image
Zhang, Xuexi (College of Automation, Guangdong University of Technology, Guangzhou 510090,
China); Xie, Yun; Yang, Yimin; Xia, Yimin Source: Huazhong Keji Daxue Xuebao (Ziran Kexue
Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), v
39, n SUPPL. 2, p 85-87+102, November 2011
445.Solid-liquid phase change property of titanium dioxide nanofluid
Jia, Li-Si (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Chen, Ying; Mo, Song-Ping Source: Kung Cheng Je Wu Li Hsueh Pao/Journal of
Engineering Thermophysics, v 32, n 11, p 1913-1916, November 2011
446.Research on ultrasonic compression of cellulosic biomass
He, Jianwen (School of Electromechanical Engineering, Guangdong University of Technology,
Canton, Guangdong Province 510006, China); Fok, Chunchiu; Guo, Zhongning; Zhang, Yongjun
Source: Advanced Materials Research, v 308-310, p 1701-1705, 2011, Advanced Design
Technology
447.Surface modification of PET films by vapor-phase photografting acrylic acid and its
application to electroless copper plating
Zhang, Huichong (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Pan, Zhanchang; Hu, Guanghui; Wei,
Zhigang; Xiao, Chum; Chen, Shirong; Li, Zhuliang; Deng, Jianfeng Source: Advanced Materials
Research, v 311-313, p 1802-1805, 2011, Advanced Materials and Processes
448.Semi-supervised temporal-spatial filter based on MRP for brain-computer interfaces
Lv, Jun (College of Automation, Guangdong University of Technology, Guangzhou, China); Wang,
Lei Source: 2011 IEEE International Conference on Information and Automation, ICIA 2011, p
519-522, 2011, 2011 IEEE International Conference on Information and Automation, ICIA
2011
449.Ferroelectric, dielectric and pyroelectric properties of highly c-axis -oriented nanostructured
(Pb,Sr)(Zr,Ti)O<inf>3</inf> thin films
Cheng, T.D. (Guangzhou Higher Education Mega Center, School of Physics and Optoelectric
Engineering, Guangdong University of Technology, Guangzhou 510006, China); Tang, X.G.;
Kuang, S.J.; Ding, N.; Jiang, Y.P.; Liu, Q.X. Source: Advanced Materials Research, v 287-290, p
2381-2386, 2011, Applications of Engineering Materials
450.NC machining simulation of loop subdivision surface algorithm with sharp feature keeping
Liu, Wei (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou,
China); Wang, Lizhu Source: Advanced Materials Research, v 317-319, p 464-468, 2011,
Equipment Manufacturing Technology and Automation
451.Uniaxial stress-strain model for concrete confined by rectangular steel tubes
Long, Yueling (Department of Civil Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Cai, Jian Source: Advanced Materials Research, v 163-167, p
1005-1011, 2011, Advances in Structures
452.An improved crawler algorithm based on hierarchical structure preservation
Hao, Zhifeng (School of Computer, Guangdong University of Technology, Guangzhou 510006,
China); Zhang, Zebin; Cai, Zhaoquan; Huang, Han Source: Key Engineering Materials,
474-476, p 2120-2124, 2011, Advanced Materials and Computer Science
v
453.Research on the velocity look-ahead algorithm in the NC system
Liu, Jianqun (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Xu, Dong; Wu, Jirong; Xu, Yang; Li, Xiao; Huang, Jian Source:
Advanced Materials Research, v 311-313, p 2379-2384, 2011, Advanced Materials and
Processes
454.Advanced interactive device in virtual knee arthroscopic surgery
He, Yu Lei (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guang Zhou, 510006, China); Li, Jin Fang; He, Han Wu Source: Advanced Materials Research,
v 189-193, p 2148-2152, 2011, Manufacturing Process Technology
455.Preparation of polystyrene microspheres by suspension polymerization
Ma, Jinling (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou,
Guangdong, 510006, China); Zhang, Xinghua Source: Advanced Materials Research, v 233-235,
p 2215-2218, 2011, Fundamental of Chemical Engineering
456.Luminescence properties of Eu³⁺/Dy³⁺ coating ZnO nanocrystals
Liao, Chen-Xing (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Wang, Yin-Hai; Hu, Yi-Hua; Luo, Li; Zhang, Wei
Source: Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis, v 31, n 5, p
1185-1188, May 2011
457.Effect of supersonic power and pH value on the structure and electrochemical performance of
Y doped nano-Ni(OH)<inf>2</inf>
Wu, Shang-Gai (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhu, Yan-Juan; Zhang, Zhong-Ju; Zhou, Zhuo-Jun; Ye,
Xian-Cong; Zheng, Han-Zhong; Lin, Xiao-Ran; Bao, Jie Source: Cailiao Gongcheng/Journal of
Materials Engineering, n 6, p 27-31, June 2011
458.Effect of co-solvent interaction on cinnamaldehyde-&beta;-cyclodextrin inclusion complex
Wu, Haibo (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, Guangdong, China); Fang, Yanxiong; Ji, Hongbing Source:
Huagong Xuebao/CIESC Journal, v 62, n SUPPL. 1, p 168-173, May 2011
459.Efficient spectrum discovery with energy constraints in cognitive radio networks
Liu, Yi (School of Elect.andInform. Engineering, Soth China University of Technology,
Guangdong University of Technology, Guangzhou, China); Yu, Rong; Xie, Shengli; Zhang, Yan;
Leung, Victor C. M. Source: 2011 18th International Conference on Telecommunications, ICT
2011, p 38-43, 2011, 2011 18th International Conference on Telecommunications, ICT 2011
460.Generating grid multiwing chaotic attractors by constructing heteroclinic loops into switching
systems
Yu, Simin (College of Automation, Guangdong University of Technology, Guangzhou 510006,
China); L&#252;, Jinhu; Chen, Guanrong; Yu, Xinghuo Source: IEEE Transactions on Circuits
and Systems II: Express Briefs, v 58, n 5, p 314-318, May 2011
461.Surface potential based model for amorphous IGZO thin film transistors
He, Hongyu (Faculty of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou, China); Tang, Huiling; Zheng, Xueren Source: ICCRD2011 - 2011 3rd
International Conference on Computer Research and Development, v 3, p 350-352, 2011,
ICCRD2011 - 2011 3rd International Conference on Computer Research and Development
462.Effect of the co-substitution of Ca²⁺ and Si⁴⁺ on the structure and
luminescence properties of Y<inf>3</inf>Al<inf>5</inf>O <inf>12</inf>: Ce³⁺
Mu, Zhongfei (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Wang, Yinhai; Chen, Li; Wang, Xiaojuan
Source: Advanced Materials Research, v 233-235, p 1844-1849, 2011, Fundamental of
Chemical Engineering
463.Experimental studies for levulinic acid production from water hyacinth plant
Lai, Huanran (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Peng, Jinping; Liao, Bin; Xian, Jiaxing; Zhang, Zhiguo;
Guo, Jianwei; Cui, Yihua Source: ICMREE2011 - Proceedings 2011 International Conference on
Materials for Renewable Energy and Environment, v 1, p 373-376, 2011, ICMREE2011 Proceedings 2011 International Conference on Materials for Renewable Energy and Environment
464.Removal of Cu²⁺ in aqueous solutions using sludge incineration slag as an
adsorbent
Liu, Jingyong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangdong Guangzhou, 510006, China); Sun, Shuiyu; Zhang, Rongxue; Zhong,
Sheng; Chen, Minting Source: Applied Mechanics and Materials, v 55-57, p 308-311, 2011,
Recent Trends in Materials and Mechanical Engineering Materials, Mechatronics and Automation
465.Lamb waves in two-dimensional phononic crystal plate with anisotropic inclusions
Yao, Yuanwei (Department of Physics, Guangdong University of Technology, Guangzhou 510006,
China); Wu, Fugen; Hou, Zhilin; Xin, Zhang Source: Ultrasonics, v 51, n 5, p 602-605, July
2011
466.Petri net-based scheduling of single-arm cluster tools with reentrant atomic layer deposition
processes
Wu, Naiqi (Department of Industrial Engineering, School of Mechatronics Engineering,
Guangdong University of Technology, Guangzhou 510006, China); Chu, Feng; Chu, Chengbin;
Zhou, Mengchu Source: IEEE Transactions on Automation Science and Engineering, v 8, n 1, p
42-55, January 2011
467.Preface
Gao, Jian (Guangdong University of Technology, China) Source: Advanced Materials Research,
v 308-310, 2011, Advanced Design Technology
468.Influence of mineral admixture on concrete abrasion resistance
Xie, Yan (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Yu, Bin; Wu, Xiaomei; Fan, Yueming Source: Advanced Materials
Research, v 168-170, p 78-81, 2011, Advances in Building Materials
469.A study of numerical simulation and experiment investigation on ECMM processing of
PRMMC
Liu, G.Y. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Guo, Z.N.; Li, Y.B.; Huang, Z.G. Source: Advanced Materials Research, v
150-151, p 895-902, 2011, Advances in Composites
470.Optimal policy for deteriorating items with trapezoidal type demand and partial backlogging
Cheng, Mingbao (School of Management, Guangdong University of Technology, Guangzhou,
China); Zhang, Bixi; Wang, Guoqing Source: Applied Mathematical Modelling, v 35, n 7, p
3552-3560, July 2011
471.Structure and performance of 35 steel after strengthened shot peening surface
nanocrystallization and gas tufftriding process
Chen, Lei (College of Material and Energy, Guangdong University of Technology, Guangzhou,
Guangdong 510006, China); Jie, Xiaohua; Zheng, Xiangxin; Li, Guoliang Source: Advanced
Materials Research, v 152-153, p 125-130, 2011, New Materials and Advanced Materials
472.The characteristic and mechanism of lead pollution in soil profiles from a sulphuric acid slag
pile sit in Guangdong,China
Liu, Jingyong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangdong Guangzhou, 510006, China); Ning, Xunan Source: Key Engineering
Materials, v 474-476, p 172-177, 2011, Advanced Materials and Computer Science
473.Research on kinematics of high speed linear feed system
Ma, P. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 51006, China); Tang, Y.B.; Chen, Z.H.; Huang, J.J. Source: Advanced Materials
Research, v 188, p 493-498, 2011, High Speed Machining
474.Numerical analysis of heat transfer mechanisms to pneumatically conveyed dense phase flow
Zheng, Y. (School of Information Engineering, Guangdong University of Technology, China);
Pugh, J.R.; McGlinchey, D.; Knight, E.A.; Liu, Q. Source: Powder Technology, v 208, n 1, p
231-236, March 10, 2011
475.Polynomial smoothing support vector regression
Ren, Bin (Faculty of Automation, Guangdong University of Technology, Guangzhou Guangdong
510090, China); Cheng, Liang-Lun Source: Kongzhi Lilun Yu Yingyong/Control Theory and
Applications, v 28, n 2, p 261-265, February 2011
476.Drilling force and chip morphology in drilling of PCB Supported hole
Yang, L.P. (Guangdong University of Technology, Guangzhou 510006, China); Huang, L.X.;
Wang, C.Y.; Zheng, L.J.; Ma, P.; Song, Y.X. Source: Advanced Materials Research, v 188, p
429-434, 2011, High Speed Machining
477.Effect of grain size on the magnetic properties of superparamagnetic
Ni<inf>0.5</inf>Zn<inf>0.5</inf>Fe<inf>2</inf>O<inf>4</inf>
nanoparticles
by
co-precipitation process
Chen, D.G. (School of Physics and Optoelectric Engineering, Guangdong University of
Technology, Guangzhou Higher Education Mega Center, Guangzhou 510006, China); Tang, X.G.;
Wu, J.B.; Zhang, W.; Liu, Q.X.; Jiang, Y.P. Source: Journal of Magnetism and Magnetic Materials,
v 323, n 12, p 1717-1721, June 2011
478.Application of EDI in the production of pharmaceutical water
Huang, Dongyue (Faculty of Environment Science and Engineering, Guangdong University of
Technology, Guangzhou, China); Luo, Jianzhong Source: 2011 International Conference on
Electric Technology and Civil Engineering, ICETCE 2011 - Proceedings, p 3916-3919, 2011,
2011 International Conference on Electric Technology and Civil Engineering, ICETCE 2011 Proceedings
479.Data-based adaptive fuzzy wavelet filter for robot-assisted system
Liu, Zhi (Department of Automation, Guangdong University of Technology, Guangzhou, China);
Wu, Qi-Hang; Zhang, Yun Source: Advanced Materials Research, v 255-260, p 1994-1998,
2011, Advances in Civil Engineering
480.A Self-control assembly machine based on vision system
Li, Weihua (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Lian, Haishan Source: Advanced Materials Research, v 308-310, p 1471-1476, 2011,
Advanced Design Technology
481.Simulated analysis of flow and deformation in trilateral constrained and asymmetric square
cup deep-drawing
Huang, Li Cheng (Faculty of Material And Energy, Guangzhou Higher Education Mega Center,
Guangdong University of Technology, NO.100, Outer Ring Road, Guang Zhou, 510006, China);
Xiao, Xiao Ting; Tan, Li Guang; Li, Guo Liang Source: Advanced Materials Research, v
199-200, p 1901-1905, 2011, Advances in Mechanical Design
482.Resistance microwelding of Au/Ni-plated phosphor bronze sheet to insulated Cu wire
Mo, Bing Hua (Faculty of Electromechanical Engineering, Guangdong University of Technology,
No.100, Outer Ring Road, Guang Zhou, 510006, China); Guo, Zhong Ning; Li, Yuan Bo; Wang,
Guan Source: Advanced Materials Research, v 189-193, p 3596-3600, 2011, Manufacturing
Process Technology
483.Adaptive back-stepping control of permanent magnetic synchronous motor based on slide
mode observer
Li, Yu-Zhou (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Zhao, Ke-Gang Source: Proceedings - 3rd International Conference
on Measuring Technology and Mechatronics Automation, ICMTMA 2011, v 1, p 326-330,
2011, Proceedings - 3rd International Conference on Measuring Technology and Mechatronics
Automation, ICMTMA 2011
484.Supramolecular assembly based on a series of meso-tetrakis(p-methoxyphenyl) porphrin
complexes
Tong, Shan Ling (College of Light Industry and Chemical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhang, Jing; Yan, Yan; Hu, Sheng; Yu, Jian; Yu, Lin
Source: Solid State Sciences, v 13, n 6, p 1320-1327, June 2011
485.Study on using fly ash and slag as matrix of constructed wetland for treatment of
lead-containing wastewater
Luo, Jianzhong (Guangdong University of Technology, Guangzhou, Guangdong, 510006, China);
Wang, Man; Zhang, Zhi; Zhuang, Wen Source: Proceedings - International Conference on
Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2011, p
2237-2240, 2011, Proceedings - International Conference on Computer Distributed Control
and Intelligent Environmental Monitoring, CDCIEM 2011
486.Analysis on deformation characteristic of the overlying high-voltage tower under the
construction of the complex lager section tunnels
Wan, Ling (Geotechnical Engineering Center Guangdong, University of Technology, Guangzhou
510090, China); Li, Zhangming; Feng, Qiang Source: 2011 International Conference on Electric
Technology and Civil Engineering, ICETCE 2011 - Proceedings, p 1019-1022, 2011, 2011
International Conference on Electric Technology and Civil Engineering, ICETCE 2011 Proceedings
487.Research on preparation of modified bentonite and its removal of ammonia nitrogen and
phosphorus from Wastewater
Nie, Jinxu (Department of Municipal Public Facility, Guangdong University of Technology,
Guangzhou, China); Tang, Wenguang; Lu, Mi; Yu, Pengjun Source: 2011 International Conference
on Electric Technology and Civil Engineering, ICETCE 2011 - Proceedings, p 6799-6804, 2011,
2011 International Conference on Electric Technology and Civil Engineering, ICETCE 2011 Proceedings
488.Neuro-fuzzy controller for rudder roll stabilization of ships
Wang, Minghui (Faculty of Computer Science, Guangdong University of Technology, China); Yu,
Yongquan; Zeng, Bi Source: Applied Mechanics and Materials, v 66-68, p 1278-1285, 2011,
Mechanical, Materials and Manufacturing Engineering
489.Deformation monitoring and analysis for a twin tunnel with super-large-span and
small-spacing
Li, Zhangming (Center of Geotechnical Engineering, Guangdong University of Technology,
Guangzhou, China); Wu, Feng Source: 2011 International Conference on Remote Sensing,
Environment and Transportation Engineering, RSETE 2011 - Proceedings, p 5864-5867, 2011,
2011 International Conference on Remote Sensing, Environment and Transportation Engineering,
RSETE 2011 - Proceedings
490.Preface
Gao, Jian (Guangdong University of Technology, China) Source: Advanced Materials Research,
v 314-316, 2011, Advanced Manufacturing Technology
491.Electro-oxidation of ethanol on the preparation of electroless Ni-P alloy electrode
Xie, Shuguang (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Pan, Zhanchang; Hu, Guanghui; Wei,
Zhigang; Xiao, Chumin; Cheng, Zhenjun; Zeng, Haixia; Tian, Xinlong Source: Advanced
Materials Research, v 311-313, p 1361-1364, 2011, Advanced Materials and Processes
492.Promoting effect of Ce in Ce/OMS-2 catalyst for catalytic combustion of dimethyl ether
Yu, Lin (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong 510006, China); Diao, Guiqiang; Ye, Fei; Sun, Ming; Zhou,
Junli; Li, Yongfeng; Liu, Yue Source: Catalysis Letters, v 141, n 1, p 111-119, January 2011
493.Low-temperature property of new type lead-free solder Sn-X-Cu-Ni
Yang, Lei (Guangdong University of Technology, Guangzhou 510006, China); Jie, Xiaohua; Guo,
Li Source: Advanced Materials Research, v 154-155, p 371-375, 2011, Materials Processing
Technologies
494.Rapid establishment of 3D intricate design platform based on modular technology by UG
Kuang, Weihua (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); Li, Fapiao Source: Key Engineering Materials, v 460-461, p 36-39, 2011,
Components, Packaging and Manufacturing Technology
495.Numerical simulation of deep-drawing processes of square cup under bilateral constrained
conditions
Xiao, Xiao Ting (Faculty of Material And Energy, Guangdong University of Technology,
Guangzhou, Guangdong, 510006, China); Huang, Li Cheng; Liao, Yi Juan; Tan, Li Guang; Chen,
Qiao Yu Source: Advanced Materials Research,
v 189-193, p 2892-2896,
2011,
Manufacturing Process Technology
496.Integrating RE/RP for rapid product development based on haptic modeling
Cheng, Siyuan (Faculty of Electronmechanical Engineering, Guangdong University of Technology,
Guangzhou 51006, China); Liu, Junhua; Zhang, Xiangwei Source: Applied Mechanics and
Materials, v 55-57, p 262-267, 2011, Recent Trends in Materials and Mechanical
Engineering Materials, Mechatronics and Automation
497.Design and implementation of the RF front-end all-digital phase-locked loop in the UHF
RFID reader
Wang, Yanliang (College of Information Engineering, Guangdong University of Technology,
China); Wang, Guitang; Liu, Wenjuan Source: Key Engineering Materials, v 474-476, p 63-68,
2011, Advanced Materials and Computer Science
498.Abnormal physics of group-II telluride system: Valence contribution of d electrons
Duan, He (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Dong, You-Zhong; Huang, Yan; Chen, Xiao-Shuang
Source: Chinese Physics B, v 20, n 4, April 2011
499.An optimistic payment protocol with mobile agents in hostile environments
Liu, Yi (Faculty of Computer, Guangdong University of Technology, Guangzhou, 510006, China);
Ding, Yong Source: Proceedings - 2011 International Conference on Network Computing and
Information Security, NCIS 2011, v 1, p 218-222, 2011, Proceedings - 2011 International
Conference on Network Computing and Information Security, NCIS 2011
500.High signal-to-noise ratio gain by stochastic resonance in an unconventional bistable system
Wan, Pin (Faculty of Automation, Guangdong University of Technology, Guangzhou, China);
Zhan, Yiju; Zheng, Hui Source: Proceedings - 2011 IEEE International Conference on Computer
Science and Automation Engineering, CSAE 2011, v 4, p 652-655, 2011, Proceedings - 2011
IEEE International Conference on Computer Science and Automation Engineering, CSAE 2011
501.MDA approach for non-functional characteristics of cyber physical systems based on
aspect-oriented method
Zhang, Lichen (Faculty of Computer Science and Technology, Guangdong University of
Technology, 510090 Guangzhou, China) Source: Communications in Computer and Information
Science, v 215 CCIS, n PART 2, p 323-328, 2011, Advances in Computer Science,
Environment, Ecoinformatics, and Education - International Conference, CSEE 2011, Proceedings
502.Global analysis of dynamic fluorescence anisotropy by a polarized phasor approach
Zhou, Yanzhou (Faculty of Automation, Guangdong University of Technology, Guangzhou,
Guangdong 510006, China); Wu, Long; Wang, Qinruo; Wang, Yonghua Source: Journal of
Fluorescence, v 21, n 1, p 11-15, January 2011
503.Research on optimal routing algorithm for public transit transfer based on the Adjacency
matrix
Zhang, Caixia (Faculty of Automation, Guangdong University of Technology, Guangdong, China);
Zhuang, Liangliang; Wang, Xiangdong; Rong, Haiwu Source: Applied Mechanics and Materials,
v 40-41, p 341-346, 2011, Advances in Science and Engineering Frontier Topics in Theoretical
and Applied Science and Engineering
504.Energy saving drive for forming equipments
Sun, Yousong (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Hu, Jianguo; Zheng, Hongbo; He, Jiping; Fang, Ya; Ruan, Weiping
Source: Advanced Materials Research, v 154-155, p 701-707, 2011, Materials Processing
Technologies
505.Numerical simulation of hydro-forming cylindrical cup with a hemispherical bottom
Kuang, Weihua (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, 510006, China) Source: Key Engineering Materials, v 460-461, p 32-35, 2011,
Components, Packaging and Manufacturing Technology
506.Fabrication of grinding tool material by the SHS of Ni-Al/diamond/dilute
Zhang, F.L. (Faculty of Mechanical and Electronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Yang, Z.F.; Zhou, Y.M.; Wang, C.Y.; Huang, H.P. Source:
International Journal of Refractory Metals and Hard Materials, v 29, n 3, p 344-350, May 2011
507.High temperature performance of high strength concrete modified by rubber powder and fiber
Liu, Feng (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Zhang, Wen-Jie; He, Dong-Ming; Li, Li-Juan Source: Jianzhu Cailiao
Xuebao/Journal of Building Materials, v 14, n 1, p 124-131, February 2011
508.Study on CD-ROM object lens wire quality inspection based on PCNN
Zhang, Miao (School of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Han, Guang; Zhong, Yingchun; Wei, Lixing Source: Yi Qi Yi Biao Xue Bao/Chinese
Journal of Scientific Instrument, v 32, n 7, p 1570-1577, July 2011
509.Enhanced red emission in ZnB<inf>2</inf>O<inf>4</inf>:Eu³⁺ by charge
compensation
Mu, Zhongfei (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Chen, Li; Wang, Xiaojuan Source: Optical
Materials, v 34, n 1, p 89-94, November 2011
510.Decision-making of planning quantities based on discrete random qualified rate and rework
success rate
Hu, Shengqiang (School of Management, Guangdong University of Technology, Guangzhou,
China); Zhang, Bixi; Zhang, Xiangwei; Liu, Huizhen Source: 2011 2nd International Conference
on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings, p 6407-6409,
2011, 2011 2nd International Conference on Mechanic Automation and Control Engineering,
MACE 2011 - Proceedings
511.Complete toluene oxidation over palladium-based monolithic catalyst prepared via a new
electroless plating method
Li, Yongfeng (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Huang, Yanting; Lin, Tanting; Yu, Qian; Yu,
Lin; Wu, Lunfu Source: Applied Mechanics and Materials, v 71-78, p 2653-2656, 2011,
Frontiers of Green Building, Materials and Civil Engineering
512.Simulation and experiment study of WOB compensation in deep sea
Liao, Hui (Guangdong University of Technology, Guangzhou, China); Wu, Baihai; Xiao, Tibing
Source: Proceedings of 2011 International Conference on Fluid Power and Mechatronics, FPM
2011, p 311-313, 2011, Proceedings of 2011 International Conference on Fluid Power and
Mechatronics, FPM 2011
513.Output feedback based bilinear control system
Yang, Ling-Ling (Faculty of Automation, Guangdong University of Technology, Guangzhou
510060, China); Zhang, Yun; Chen, Zhen-Feng Source: Kongzhi yu Juece/Control and Decision,
v 26, n 10, p 1549-1552+1561, October 2011
514.Study on treatment technology of waste water with copper in complex System
Chen, Wen-Song (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, China); Lin, Hua-Shi; Lin, Jian-Feng Source: Advanced Materials
Research, v 317-319, p 1847-1851, 2011, Equipment Manufacturing Technology and
Automation
515.Building global map in autonomous robot soccer system
Zhang, Xue-Xi (College of Automation, Guangdong University of Technology, Guangzhou
Guangdong 510090, China); Yang, Yi-Min; Xie, Yun Source: Kongzhi Lilun Yu Yingyong/Control
Theory and Applications, v 28, n 7, p 963-972, July 2011
516.Direct torque control system without speed sensor of doubly fed generator based on mras
Yang, Junhua (Guangdong University of Technology, Guangzhou 510006, China); Zheng, Jianhua;
Yang, Mengli; Feng, Huanxia; Wu, Jie Source: Taiyangneng Xuebao/Acta Energiae Solaris Sinica,
v 32, n 8, p 1222-1229, August 2011
517.Numerical analysis on transmission characteristics of Stephenson's six-bar punching
mechanism with servo input
Hu, Jianguo (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Sun, Yousong; Cheng, Yongqi; Ruan, Weiping Source: Applied Mechanics and
Materials, v 86, p 623-628, 2011, Advances in Power Transmission Science and Technology
518.Density weighted least squares support vector machine
Xu, Shuqiong (Automation Department, Guangdong University of Technology, Guangzhou
511442, China); Yuan, Conggui; Zhang, Xinzheng Source: Proceedings of the 30th Chinese
Control Conference, CCC 2011, p 5310-5314, 2011, Proceedings of the 30th Chinese Control
Conference, CCC 2011
519.Application of MECHATROLINK-II fieldbus in multi-axis embedded CNC system
Gao, Weiqiang (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Qing, Chaoting; Hu, Zehua; Huang, Zouya Source: Advanced
Materials Research, v 314-316, p 1695-1701, 2011, Advanced Manufacturing Technology
520.Experimental study on the solidification/stabilization of textile dyeing sludge
Ning, Xun An (Faculty of Environmental Science and Engineering, Guangzhou Higher Education
Mega Center, Guangdong University of Technology, NO.100 Waihuan Xi Road, Panyu District,
Guangzhou, 510006, China); Zhou, Jian Bo; Liu, Jing Yong; Yang, Zuo Yi; Tian, Yu; Zhang, Ning
Source: Advanced Materials Research, v 197-198, p 1010-1015, 2011, New and Advanced
Materials
521.Melt-grafting mechanism study of maleic anhydride onto polypropylene with 1-decene as the
second monomer
Lei, Caihong (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Chen, Dahua; Wu, Bo; Xu, Yunqi; Li, Shanliang; Huang, Weiliang Source:
Journal of Applied Polymer Science, v 121, n 6, p 3724-3732, September 15, 2011
522.esign and strength analysis of ultra-high speed permanent magnet DC rotor
Xiao, J.C. (Guangdong University of Technology, China); Xiao, S.H.; Wu, H. Source: Advanced
Materials Research, v 188, p 481-486, 2011, High Speed Machining
523.A study on the electrochemical properties of LiFePO<inf>4</inf> doping with different
diameter MWCNTs
Zeng, Zhifeng (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Haiyan; Hu, Xiduo Source: Advanced Materials Research, v 311-313, p
1393-1397, 2011, Advanced Materials and Processes
524.Preparation and property of SnXCuNiBi solder alloy
Chen, Haiyan (Guangdong University of Technology, Guangzhou, Guangdong 510006, China);
Jie, Xiaohua; Zhang, Haiyan; Chen, YUlong; Guo, Li Source: Advanced Materials Research, v
146-147, p 485-490, 2011, Advances in Superalloys
525.Research on expanded polystyrene light-aggregate concrete
Ning, Xun'an (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Liu, Jingyong; Yang, Zuoyi Source:
Advanced Materials Research, v 168-170, p 276-280, 2011, Advances in Building Materials
526.Model for prediction of saltwater intrusion based on partial mutual information and fixed size
least squares support vector machine
Yuan, Conggui (Automation Department, Guangdong University of Technology, Guangzhou
511442, China); Zhang, Xinzheng; Chen, Xu Source: Proceedings of the 30th Chinese Control
Conference, CCC 2011, p 1482-1487, 2011, Proceedings of the 30th Chinese Control
Conference, CCC 2011
527.The structure and luminescence properties of a novel orange emitting phosphor
Y<inf>3</inf>Mn<inf>x</inf>Al<inf>5-2x</inf>Si<inf>x</inf>O <inf>12</inf>
Mu, Zhongfei (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Wu, Haoyi; Fu, Chujun; Kang, Fengwen
Source: Physica B: Condensed Matter, v 406, n 4, p 864-868, February 2011
528.Debonding prediction of RC beam flexurally strengthened with prestressed FPR
Xie, Jianhe (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Zhao, Jinxia; Huang, Peiyan Source: Advanced
Materials Research, v 163-167, p 3766-3771, 2011, Advances in Structures
529.A construction method of wavelet network based on local time-frequency information
Zhang, Jun (College of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Wan, Xiangkui Source: Journal of Information and Computational
Science, v 8, n 4, p 618-626, April 2011
530.Collision avoidance MAC protocol for RFID reader networks
Wang, Yong-Hua (Faculty of Automation, Guangdong University of Technology, Guangzhou
510006, China); Yang, Jian; Zhan, Yi-Ju; Wan, Pin Source: Dianzi Keji Daxue Xuebao/Journal of
the University of Electronic Science and Technology of China, v 40, n 3, p 388-391, May 2011
531.UASB-CASS joint technology applied to treatment of brewery wastewater
Wang, Ting-Yu (School of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); Huang, Jin Source: Proceedings - International Conference on Computer
Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2011, p 330-333, 2011,
Proceedings - International Conference on Computer Distributed Control and Intelligent
Environmental Monitoring, CDCIEM 2011
532.The Nd-doping effect on dielectric abnormity of BiFeO<inf>3</inf> ceramics below the
N&#233;el temperature
Chen, D.G. (School of Physics and Optoelectric Engineering, Guangzhou Higher Education Mega
Center, Guangdong University of Technology, Guangzhou, 510006, China); Tang, X.G.; Liu, Q.X.;
Cheng, X.F.; Zou, Y. Source: Materials Science Forum, v 687, p 439-446, 2011, Functional
and Electronic Materials
533.Synthesis
of
Eu²⁺
and
Dy³⁺
codoped
Ba
<inf>2</inf>MgSi<inf>2</inf>O<inf>7</inf> phosphor for energy storage
Wu, Hao Yi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Waihuanxi Road #100 HEMC, Guangzhou, 510006, China); Hu, Yi Hua; Wang, Yin
Hai; Fu, Chu Jun; Kang, Feng Wen Source: Advanced Materials Research, v 236-238, p
3028-3031, 2011, Application of Chemical Engineering
534.Preparation and properties of LiFePO<inf>4</inf> cathode material for lithium ion power
battery
Li, Jun (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, 729 East Dongfeng Road, Guangzhou, 510006, China); Zhou, Yan; Zheng, Yu Ying;
Tang, Sheng He; Li, Da Guang Source: Advanced Materials Research, v 239-242, p 302-305,
2011, Advanced Materials
535.Heat transfer characteristic analysis of confined impinging jet cooling system with
micro-scale round nozzles
Wang, Changhong (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); Chen, Ying; Tu, Juan Source: Advanced Materials Research, v 171-172, p
799-803, 2011, Engineering Materials, Energy, Management and Control
536.Enhanced
luminescence
of
Dy³⁺
in
Y<inf>3</inf>Al
<inf>5</inf>O<inf>12</inf> by Bi³⁺ co-doping
Mu, Zhongfei (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Chen, Li; Wang, Xiaojuan Source: Journal of
Luminescence, v 131, n 8, p 1687-1691, August 2011
537.Metal flow rule of multi-way tube hydro forming for air handling unit
Wen, Hua Dian (Faculty of Material and Energy, Guangdong University of Technology
Guangzhou, No.100, Waihuan Xi Road, Guangzhou, 510006, China); Xiao, Xiao Ting; Zhang,
Kai; Chen, Ying Source: Advanced Materials Research, v 239-242, p 1597-1600, 2011,
Advanced Materials
538.Characterization of &beta;-cyclodextrin-thymol inclusion complexes
Chai, Xianghua (Food Science and Bioengineering Department, Guangdong University of
Technology, Guangzhou 510006, China); Lin, Ruohui; Wu, Kegang; Li, Shuri Source: Advanced
Materials Research, v 233-235, p 1766-1773, 2011, Fundamental of Chemical Engineering
539.Application analysis on the information management system for water supply network in
Guangzhou
Chen, Yuli (School of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou, China); Wang, Zhihong; Tu, Yu; Wang, Shen; Sun, Wen Source: 2011 International
Conference on Electric Technology and Civil Engineering, ICETCE 2011 - Proceedings, p
5758-5763,
2011,
2011 International Conference on Electric Technology and Civil
Engineering, ICETCE 2011 - Proceedings
540.X-ray photoelectron spectroscopy of (La<inf>0.7</inf>Sr<inf>0.3</inf>) MnO<inf>3</inf>
thin films prepared by pulsed laser deposition
Xiong, H.F. (School of Physics and Optoelectric Engineering, Guangdong University of
Technology, Guangzhou Higher Education Mega Center, Guangzhou 510006, China); Cheng, T.D.;
Tang, X.G.; Chen, J.; Liu, Q.X. Source: Advanced Materials Research, v 284-286, p 2191-2197,
2011, Materials and Design
541.Characters of particles in copper-water nanofluids made by novel one-step aqueous reduction
Huang, Junsheng (Faculty of Material and Energy, Guangdong University of Technology, Panyu
University Town, Guang Zhou, 510006, China); Nie, Yuying; Chen, Ying Source: Key
Engineering Materials, v 483, p 301-304, 2011, MEMS/NEMS Nano Technology
542.Partial mutual information for input selection of time series prediction
Yuan, Conggui (Automation Department, Guangdong University of Technology, China); Zhang,
Xinzheng; Xu, Shuqiong Source: Proceedings of the 2011 Chinese Control and Decision
Conference, CCDC 2011, p 2010-2014, 2011, Proceedings of the 2011 Chinese Control and
Decision Conference, CCDC 2011
543.A study of jet formation for premixed slurry jet nozzle using the discrete phase model
Luo, Wusheng (Guangdong University of Technology, 510090 Guangzhou, China); Wang,
Chengyong; Wang, Jun; Song, Yuexian Source: Advanced Materials Research, v 325, p 638-644,
2011, Advances in Abrasive Technology XIV
544.Dimethyl ether catalytic combustion over manganese oxides with different structures
Yu, Lin (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, Guangdong, China); Diao, Guiqiang; Ye, Fei; Sun, Ming; Liu,
Yue; Yu, Qian Source: Advanced Materials Research, v 146-147, p 1482-1485, 2011,
Advances in Superalloys
545.Preparation technology of Zn-peptide complex and its effects on growth performance and
immunity of oreochromis niloticus
Zeng, Qing Zhu (School of Chemistry and Chemical Engineering, Guangzhou University, 230,
Wai Huan Xi Road, Guangzhou, 510006, China); Guo, Cun Rong; Guo, Qing Quan; Fang, Xi
Juan; Zhan, Yu; Liu, Peng; Fan, Ya Ming; Gu, Cai Qin Source: Advanced Materials Research, v
197-198, p 182-189, 2011, New and Advanced Materials
546.Study on the effect of ultrasonic waves on the low temperature electroless Ni-P plating on
copper substrate
Hu, Yong Jun (Faculty of Material and Energy, Guangdong University of Technology, No. 100,
Wai Huan West Road, Guangzhou, 510006, China); Hu, Guang Hui; Cheng, Xiao Ling; Xiao,
Xiao Ting; Zhang, Hai Yan; Li, Feng; Xu, Qing Song Source: Advanced Materials Research, v
189-193, p 1142-1145, 2011, Manufacturing Process Technology
547.Explore on pressure-drop performance of nanofibrous filtration membrane
Wang, Han (Center of Laboratories, Guangdong University of Technology, No. 100 Waihuan Xi
Road, Panyu District, Guangzhou, 510006, China); Yang, Zuo Yi; Liu, Jin Yong; Zheng, Gao Feng;
Chen, Ling Min Source: Advanced Materials Research, v 236-238, p 1885-1888, 2011,
Application of Chemical Engineering
548.Microwave absorption properties of Mn- and Ni-doped zinc oxides
Wu, Qi-Bai (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Zhao, Wei; Zeng, Guo-Xun; Zhang, Hai-Yan; Wei, Ai-Xiang; Wang, Jia Source:
Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, v 29, n 3, May
2011
549.The first synthesis of N,N,N',N'-tetramethyl-1, 3-disaminomethyl- adamantane
dihydrochloride
Zhu, Hua (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Guo, Jianwei; Yang, Chufen; Liu, Sa; Peng, Jinping;
Cui, Yihua Source: Advanced Materials Research, v 233-235, p 242-245, 2011, Fundamental
of Chemical Engineering
550.Dynamic tank assignment analysis for short-term scheduling of crude oil operations by using
Petri net model
Wang, Wei (School of Mechatronics Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Wu, Nai-Qi; Li, Lin-Wei Source: Xitong Gongcheng Lilun yu
Shijian/System Engineering Theory and Practice, v 31, n 5, p 976-985, May 2011
551.Gait control based on energy-efficiency optimization for biped robots
Wang, Li-Yang (Faculty of Automation, Guangdong University of Technology, Guangzhou
Guangdong 510006, China); Liu, Zhi; Zeng, Xiao-Jie; Zhang, Yun Source: Kongzhi Lilun Yu
Yingyong/Control Theory and Applications, v 28, n 5, p 667-674, May 2011
552.Study on the preparation of Y-doped multiphase nano-Ni(OH)<inf>2</inf> by a supersonic
precipitation method and its electrochemical performance
Zhou, Zhuojun (Guangdong University of Technology, Guangzhou 510006, China); Zhu, Yanjuan;
Zhang, Zhongju; Ye, Xiancong; Wu, Shanggai; Zheng, Hanzhong; Lin, Xiaoran; Bao, Jie Source:
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, v 40, n 7, p
1287-1291, July 2011
553.The design of automatic rotary-rivet-placing system
Zou, Jian (School of Mechanical and Electric Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Li, Ketian; Liu, Ji'an; Li, Junchao; Zhou, Weibing Source: Applied
Mechanics and Materials, v 84-85, p 332-336, 2011, Green Power, Materials and
Manufacturing Technology and Applications, GPMMTA2011
554.Tribological properties of Pb-Sn-CNTs composite coatings
Hu, Zhengxi (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Jie, Xiaohua; Lu, Guohui Source: Advanced Materials Research, v 152-153, p
580-586, 2011, New Materials and Advanced Materials
555.Synthesis
and
characterization
of
nanometer
Ce<inf>0.75</inf>Zr
<inf>0.25</inf>O<inf>2</inf> powders by solid-state chemical reaction method
Zheng, Yuying (College of Light and Chemical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Zhengfa; Huang, Huimin; Ji, Wenjin; Sun, Ming;
Chen, Changshui Source: Journal of Nanomaterials, v 2011, 2011
556.Exact algorithm and heuristic for the Closest String Problem
Liu, Xiaolan (School of Computer Science and Engineering, South China University of
Technology, Guangzhou 510006, China); Liu, Shenghan; Hao, Zhifeng; Mauch, Holger Source:
Computers and Operations Research, v 38, n 11, p 1513-1520, November 2011
557.Adaptive control for a class of nonlinear pure-feedback systems based on partition of unity
back-stepping approach
Luo, Liang (Faculty of Automation, Guangdong University of Technology, No. 100, Waihuan Xi
Road, Panyu District, Guangzhou 510006, China); Wang, Yinhe; Fan, Yongqing; Zhang, Yun
Source: ICIC Express Letters, v 5, n 3, p 707-712, March 2011
558.Preparation of Fe-Cu-Ni-Mo-C alloy with high performance by powder metallurgy warm
compaction
Huang, Jun Sheng (Faculty of Material and Energy, Guangdong University of Technology, Guang
zhou, 510006, China); Min, Sheng Source: Advanced Materials Research, v 194-196, p 100-103,
2011, Advanced Engineering Materials
559.Study of centerline segregation in alloy tool steel on CSP technology
Chen, Jing Hu (Faculty of Materials and Energy, Guangdong University of Technology, No.100,
Wai Huan Xi Road, Guangzhou, 510006, China); Jie, Xiao Hua Source: Advanced Materials
Research, v 197-198, p 1744-1748, 2011, New and Advanced Materials
560.Detection of bisphenol A in water samples using ELISA determination method
Zheng, J. (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou Higher Education Mega Center, No.100 Waihuan Xi Road, Panyu
District, Guangzhou, China); Zhao, S.Q.; Xu, X.T.; Zhang, K. Source: Water Science and
Technology: Water Supply, v 11, n 1, p 55-60, 2011
561.Terahertz lasers based on optically pumped four-level asymmetrical double quantum wells
Liu, Dong-Feng (School of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China) Source: Physica E: Low-Dimensional Systems and Nanostructures,
v 43, n 8, p 1445-1448, June 2011
562.Density functional theory calculations of arsenic(V) structures on perfect Tio<inf>2</inf>
anatase (1 0 1) surface
Wei, Zhigang (Department of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Zou, Yandi; Zeng, Haixia; Zhong, Xuechun; Cheng,
Zhenjun; Xie, Shuguang Source: Advanced Materials Research, v 233-235, p 495-498, 2011,
Fundamental of Chemical Engineering
563.A new approach to measure deviation of seam tracking in high-power fiber laser welding
Gao, Xiangdong (School of Mechanical and Electrical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); You, Deyong; Katayama, Seiji Source: Hanjie
Xuebao/Transactions of the China Welding Institution, v 32, n 5, p 49-52, May 2011
564.Influence of n(S):n(Cd) in precursors on the structural and luminescent properties of CdS
films
Zhao, Xiang-Hui (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Wei, Ai-Xiang; Zhao, Yu Source: Faguang Xuebao/Chinese Journal
of Luminescence, v 32, n 8, p 793-797, August 2011
565.A review on organic renewal design of guangdong historical bridge landscape
Li, Xuhong (Guangdong University of Technology, Guangzhou, 510090, China); Chen, Yining; Li,
Chengmin; Lin, Shaoming; Meng, Ziwei Source: Applied Mechanics and Materials, v 71-78, p
270-277, 2011, Frontiers of Green Building, Materials and Civil Engineering
566.Effect analysis of temperature in the large continuous rigid frame bridge
Yin, Wu (Faculty of Civil and Highway Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Jiang, Haibo; Zou, Linbin; Liu, Hongrui; Zou, Jinhua Source:
Applied Mechanics and Materials, v 71-78, p 1339-1343, 2011, Frontiers of Green Building,
Materials and Civil Engineering
567.Theoretical studies of arsenite adsorption and its oxidation mechanism on a perfect
TiO<inf>2</inf> anatase (1 0 1) surface
Wei, Zhigang (Department of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Zhang, Shaowen; Pan, Zhanchang; Liu, Yue Source:
Applied Surface Science, v 258, n 3, p 1192-1198, November 15, 2011
568.Experimental study on debonding load-carrying capacity of cracked concrete strengthened
with CFRP sheet
Xie, Jianhe (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, China); Guo, Yongchang; Chen, Linjie; Li, Lijuan Source: Applied
Mechanics and Materials, v 71-78, p 3312-3315, 2011, Frontiers of Green Building,
Materials and Civil Engineering
569.Design of TFT-LCD panels optical detection auto-focus system
Xiao, Lei (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Cheng, Lianglun; Fan, Fuming Source: Hongwai yu Jiguang Gongcheng/Infrared and
Laser Engineering, v 40, n 9, p 1789-1795, September 2011
570.A novel adaptive PID controller based on Actor-Critic learning
Chen, Xue-Song (Faculty of Applied Mathematics, Guangdong University of Technology,
Guangzhou Guangdong 510006, China); Yang, Yi-Min Source: Kongzhi Lilun Yu
Yingyong/Control Theory and Applications, v 28, n 8, p 1187-1192, August 2011
571.Effect of interfacial modifiers on physical properties and flammability properties of PE/Wood
composites
Hong, Haoqun (College of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Liu, Tao; He, Hui; Jia, Demin; Zhang, Haiyan Source: Polymers and
Polymer Composites, v 19, n 8, p 639-646, 2011
572.Study on balance points of Bucket Brigade lines with return velocities
Song, Jing (School of Management, Guangdong University of Technology, Guangzhou 510520,
China); Zhang, Bixi; Guan, Yingying Source: Advanced Materials Research, v 314-316, p
2273-2277, 2011, Advanced Manufacturing Technology
573.Experimental study on new technology for solidifying/stabilizing papermaking sludge
Ning, XunAn (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Li, Shiwen; Liu, Jingyong; Yang, Zuoyi;
Ying, Zhu Source: Advanced Materials Research, v 156-157, p 84-89, 2011, Advanced
Manufacturing Technology
574.Second wavelet transform automated threshold for partial discharge signal extraction
Hong-Xia, Luo (Huali College, Guangdong University of Technology, Guangzhou 511325, China);
Xue-Feng, Zhang; Tian-Yun, Li Source: 2011 IEEE 3rd International Conference on
Communication Software and Networks, ICCSN 2011, p 225-228, 2011, 2011 IEEE 3rd
International Conference on Communication Software and Networks, ICCSN 2011
575.Workgroup-based manpower planning for multi-type staff collaboration
Liang, Zuhong (Key Laboratory of Computer Integrated Manufacturing System of Guangdong
Province, Guangdong University of Technology, Guangzhou 510006, China); Chen, Qingxin; Mao,
Ning Source: Advanced Materials Research, v 314-316, p 2278-2281, 2011, Advanced
Manufacturing Technology
576.Tool path optimization based on the constrain of radial cutting depth in high speed milling
Li, Kaizhu (College of Electromechanical Engineering, GuangDong University of Technology,
Guangzhou, 510006, China); Wu, Shixiong Source: Advanced Materials Research, v 314-316, p
1734-1739, 2011, Advanced Manufacturing Technology
577.Main crack propagation behaviour of RC beams strengthened with CFRP under fatigue load
Deng, Jun (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Huang, Peiyan Source: Key Engineering Materials, v 462-463, p
791-795, 2011, Fracture and Strength of Solids VII
578.A review on drilling printed circuit boards
Zheng, L.J. (Guangdong University of Technology, Guangzhou 510006, China); Wang, C.Y.; Song,
Y.X.; Yang, L.P.; Qu, Y.P.; Ma, P.; Fu, L.Y. Source: Advanced Materials Research, v 188, p
441-449, 2011, High Speed Machining
579.6 Sigma Management in logistics distribution
Zhao, Xipin (School of Management, Guangdong University of Technology, Guangzhou, China);
Dai, Yongyi Source: 2011 International Conference on E-Business and E-Government, ICEE2011
- Proceedings, p 7614-7617, 2011, 2011 International Conference on E-Business and
E-Government, ICEE2011 - Proceedings
580.Research on the advantages of nanofibrous air filtration membrane
Wang, Han (Center of Laboratories, Guangdong University of Technology, Guangzhou, 510006,
China); Yang, Zuo-Yi; Liu, Jin-Yong; Zheng, Gao-Feng; Liu, Yin-Ping Source: Key Engineering
Materials, v 474-476, p 2016-2019, 2011, Advanced Materials and Computer Science
581.Soft magnetic material (NiFe<inf>2</inf>O<inf>4</inf>) particles synthesized by solvent
co-precipitation method
Zhang, W. (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Cen, J.S.; Hu, Z.F.; Zhuang, L.; Tang, X.G.; Luo, L.
Source: Advanced Materials Research, v 216, p 649-653, 2011, Optical, Electronic Materials
and Applications
582.Study on treatment of printing and dyeing wastewater by magnetic seed coagulation-high
gradient magnetic separation
Chen, Wen-Song (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, China); Lin, Hua-Shi; Zhang, Shuo-Feng Source: Proceedings International Conference on Computer Distributed Control and Intelligent Environmental
Monitoring, CDCIEM 2011, p 2232-2236, 2011, Proceedings - International Conference on
Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2011
583.An improved Palmer-based heuristic for two-stage flexible flow shop with group constraint
Li, Zhantao (Key Laboratory of Computer Integrated Manufacturing System of Guangdong
Province, Guangdong University of Technology, Guangzhou 510006, China); Chen, Qingxin; Mao,
Ning Source: Advanced Materials Research, v 314-316, p 2076-2081, 2011, Advanced
Manufacturing Technology
584.Research about techniques of Chinese traditional architectural stone carving
Li, Xuhong (GuangDong University of Technology, Department of Environment Art Design, Art
and Design College, Dongfeng East Road, No. 729, Yuexiu District, Guangzhou City, Guangdong
Province, China) Source: Advanced Materials Research, v 154-155, p 1232-1239, 2011,
Materials Processing Technologies
585.Intelligent token Petri nets for modelling and control of reconfigurable automated
manufacturing systems with dynamical changes
Wu, Naiqi (Department of Industrial Engineering, School of Mechatronics, Guangdong University
of Technology, West 100, Outer Ring Road, Xiaoguwei Island, Guangzhou, China); Zhou,
Mengchu Source: Transactions of the Institute of Measurement and Control, v 33, n 1, p 9-29,
February 2011
586.Discontinuity and convergency of solutions for a class of linear singular switched systems
with time delay
Xie, Xiang Sheng (Institute of System Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Chen, Jun Hong; Jia, Gong Xiang Source: Applied Mechanics and
Materials, v 55-57, p 2130-2134, 2011, Recent Trends in Materials and Mechanical
Engineering Materials, Mechatronics and Automation
587.The influence of heating-cooling cycles on the thermal storage performances of Al-17 Wt.%
Si alloy
Li, Feng (Faculty of Material and Energy, Guangdong University of Technology, No. 100, Wai
Huan West Road, Guangzhou, 510006, China); Hu, Yong Jun; Zhang, Ren Yuan Source:
Advanced Materials Research, v 239-242, p 2248-2251, 2011, Advanced Materials
588.Characterization of Cr-Ni-ZrO<inf>2</inf> composite coatings electrodeposited from Cr(III)
plating bath
He, Xiang Zhu (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, No. 100 Waihuan Xi Road, Guangzhou, Guangdong, 510006, China); Zhou, Xin Li;
Zhang, Xiao Wei; Sun, Xin Source: Advanced Materials Research, v 239-242, p 2733-2737,
2011, Advanced Materials
589.Effect of electroless plating conditions on toluene catalytic combustion performance of
palladium-based catalyst
Li, Yong-Feng (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Li, Yu; Mai, Rong-Jian; Yu, Qian; Yu, Lin
Source: Advanced Materials Research, v 233-235, p 416-419, 2011, Fundamental of
Chemical Engineering
590.Energy diversification and sustainable economy growth
Hui, Zuo (School of Economics and Commerce, Guangdong University of Technology,
Guangzhou City, China); Danxiang, Ai; Chengke, Zhang Source: 2011 International Conference
on E-Business and E-Government, ICEE2011 - Proceedings, p 3211-3214, 2011, 2011
International Conference on E-Business and E-Government, ICEE2011 - Proceedings
591.Research of pump-control electro-hydraulic servo system based on multi-mode extension
control
Zheng, Hongbo (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); Sun, Yousong; Xian, Canbiao Source: Advanced Materials Research, v
317-319, p 2181-2188, 2011, Equipment Manufacturing Technology and Automation
592.Characterization of ultrafine glassy powder for Al-Si-Ca-P-O-F polynary system by liquid
precipitation
Yuan, G.C. (Faculty of Material and Energy, Guangdong University of Technology, China); Wu,
Q.G.; Zeng, G.X.; Ling, Z.Y. Source: Advanced Materials Research, v 177, p 433-436, 2011,
Testing and Evaluation of Inorganic Materials I
593.Interface properties of cracked RC beams strengthened with prestressed hybrid FRP - Part I:
Crack height
Guo, Y.C. (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou, China); Xie, J.H. Source: Advanced Materials Research, v 163-167, p 3673-3676,
2011, Advances in Structures
594.Double-superposition assumption for piezoelectric laminate beam theory
Yang, Xiaomei (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou 510006, China) Source: Advanced Materials Research, v 163-167, p
2101-2105, 2011, Advances in Structures
595.Stochastic stability criterion for sampled-data control systems via average dwell-time
approach
Tang, Bin (Faculty of Automation, Guangdong University of Technology, Guangzhou Guangdong,
510006, China); Zeng, Qi-Jie; Zhang, Yun Source: Proceedings of the 2nd International
Conference on Intelligent Control and Information Processing, ICICIP 2011, n PART 2, p
1035-1040, 2011, Proceedings of the 2nd International Conference on Intelligent Control and
Information Processing, ICICIP 2011
596.Experimental study on the bio-drying characteristics and its influencing factors of paper mill
sludge
Ning, Xun An (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Chen, Qing Lin; Zhou, Jian Bo; Yang, Zuo
Yi; Liu, Jing Yong Source: Advanced Materials Research, v 204-210, p 88-94, 2011,
Advanced Research on Industry, Information System and Material Engineering
597.Fitting and verification viscosity parameter of ABS / aluminum blends
Zhu, Haiyan (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou,
Guangdong, 510006, China); Xiao, Xiaoting; Zhang, Zhuheng Source: Advanced Materials
Research, v 308-310, p 824-830, 2011, Advanced Design Technology
598.Studies on oxidative stability of microencapsulated oils rich in polyunsaturated fatty acids
Chai, Xiang Hua (Food Science and Bioengineering Department, Guangdong University of
Technology, Guangzhou, 510006, China); Wu, Ke Gang; Lin, Ruo Hui; Liu, Xiao Li Source:
Advanced Materials Research, v 236-238, p 2516-2522, 2011, Application of Chemical
Engineering
599.CuCr1 alloy surface hardening via ultrasonic assisted electro-spark deposition
Xu, Yong (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Guo, Z.N.; Wang, Guan; Zhang, Y.J. Source: Advanced Materials Research, v 279, p
33-38, 2011, Mechanics, Solid State and Engineering Materials
600.Extension control research of pump-control electro-hydraulic servo System
Zheng, Hongbo (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); Sun, Yousong; Li, Mian; Xian, Canbiao Source: Applied Mechanics and
Materials, v 80-81, p 917-921, 2011, Information Engineering for Mechanics and Materials
601.A hybrid-stabilized solid element for piezoelectric laminated plate analysis
Yang, Xiaomei (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou 510006, China) Source: Advanced Materials Research, v 311-313, p
248-255, 2011, Advanced Materials and Processes
602.Ablation threshold of sapphire by pulsed green laser in nanosecond regime
Xie, Xiaozhu (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, Guangdong, 510006, China); Huang, Fumin; Wei, Xin; Hu, Wei; Ren, Qinglei; Yuan,
Xuerui Source: Advanced Materials Research, v 314-316, p 1930-1934, 2011, Advanced
Manufacturing Technology
603.Study on the stress-strain distribution rule of the cylindrical part deep drawing with
prefabricate-holes
Tan, Li-Guang (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou, China); Xiao, Xiao-Ting; Wen, Hua-Dian; Chen, Qiao-Yu Source: Advanced
Materials Research, v 317-319, p 231-235, 2011, Equipment Manufacturing Technology and
Automation
604.Study on a new way of aligning the focal plane for the laser projection image system
Shi, Ying (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhou, Jinyun; Lei, Liang; Lin, Qinghua; Wang, Xinxing;
Mei, Longhua Source: Advanced Materials Research, v 314-316, p 1914-1917, 2011,
Advanced Manufacturing Technology
605.Modal analysis of ball screw based on ANSYS software
Yuan, Qingke (College of Mechanical Engineering, Guangdong University of Technology,
Guangzhou, Guangdong, 510006, China); Du, Ya'nan; Ding, Yao; Wang, Tongle Source:
Advanced Materials Research, v 314-316, p 1981-1986, 2011, Advanced Manufacturing
Technology
606.The metallographic structure and mechanical properties of the brazing weld of 3003
aluminum alloy
Hua, Liang Xing (Automotive Engineering Department, Guangxi University of Technology,
545006, Liuzhou, guangxi, China); Hua, Jie Xiao Source: Advanced Materials Research, v
287-290, p 3098-3101, 2011, Applications of Engineering Materials
607.Research on pavement characteristics of epoxy resin and rubber modified asphalt
Zhang, Ronghui (Faculty of Civil and Traffic Engineering, Guangdong University of Technology,
Guangzhou, Guangdong, 510006, China); Duan, Jingjing; Yin, Yingmei Source: Advanced
Materials Research, v 150-151, p 433-440, 2011, Advances in Composites
608.Thermal conductive composite prepared by carbon coated aluminum nanoparticles filled
silicone rubber
Zhang, Haiyan (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou, 510006, China); Lin, Jin; Hong, Haoqun Source: Advanced Materials Research, v
150-151, p 464-469, 2011, Advances in Composites
609.Model-based robust design for time-pressure fluid dispensing using surrogate modeling
Zhao, Yi-Xiang (Faculty of Electro-Mechanical Engineering, Guangdong University of
Technology, Guangzhou, China); Chen, Xin-Du Source: International Journal of Advanced
Manufacturing Technology, v 55, n 5-8, p 433-446, July 2011
610.The design of embedded control system in knee-joint rehabilitation trainer based on S3C2440
Li, Xiao (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guang Zhou, 510006, China); Zhang, Zhi Bin; Hong, Xia Source: Advanced Materials Research,
v 201-203, p 2435-2440, 2011, Advanced Manufacturing Systems
611.Influence and mechanism of different pH values of extractant on the leachability of heavy
metals in industrial sewage sludge
Liu, Jing Yong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, No. 100, Waihuan Xi Road, Panyu District, Guangzhou, 510006, China); Sun, Shui
Yu; Xu, Yan Bin; Zheng, Li; Huang, Shao Song Source: Advanced Materials Research, v
197-198, p 1000-1004, 2011, New and Advanced Materials
612.The dielectric characteristics of Sr and Mg doped CCTO ceramics
Liu, Q.X. (School of Physics and Optoelectric Engineering, Guangdong University of Technology,
Guangzhou Higher Education Mega Center, Guangzhou, 510006, China); Tang, X.G.; Jiang, Y.P.;
Dong, F.L. Source: Materials Science Forum, v 687, p 416-421, 2011, Functional and
Electronic Materials
613.The mechanisms of epoxy latex coatings curing at ambient temperature comparison with
solvent-type ones
Guo, Qingquan (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou University City 510006, China); Li, Daguang; Guo, Jianwei; Chen,
Huanqin Source: Advanced Materials Research, v 150-151, p 1249-1253, 2011, Advances in
Composites
614.Prediction method of vertical ultimate bearing capacity of single pile based on support vector
machine
Liu, Yongjian (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Liang, Shihua; Wu, Jiawu; Fu, Na Source: Advanced
Materials Research, v 168-170, p 2278-2282, 2011, Advances in Building Materials
615.Self-learning control of PMA-actuated knee-joint rehabilitation training device based on
fuzzy neural network
Li, Xiao (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Xia, Hong; Guan, Ting Source: Key Engineering Materials, v
467-469, p 1645-1650, 2011, Materials, Mechatronics and Automation
616.Deformation mechanism analysis of hydro-drawing parabola workpieces based on
DYNAFORM
Kuang, Wei Hua (Faculty of Materials and Energy, Guangdong University of Technology, 100
Waihuan Xi Road, Guangzhou, 510006, China) Source: Materials Science Forum, v 675 677, p
887-890, 2011, Advanced Material Science and Technology
617.A CAE/CAI integrated method for sheet metal forming
Jun, Liu (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Cheng, Siyuan; Li, Suyang; Zhang, Xiangwei Source: Key Engineering
Materials, v 474-476, p 1730-1735, 2011, Advanced Materials and Computer Science
618.The electromagnetic shielding performance of conductive silicon rubber filled with silvered
glass beads/carbon fiber
Peng, Zuxiong (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Zhang, Haiyan; Chen, Tianli; Hu, Yongjun; Zeng, Guoxun Source:
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, v 27, n 1,
p 88-91, January 2011
619.Cutting force and processing parameters optimization of plunge milling for die steel
Zhou, Y.M. (Guangdong University of Technology, Guangzhou, China); Wang, C.Y.; Yang, Q.Y.;
Song, Y.X. Source: Advanced Materials Research, v 188, p 295-300, 2011, High Speed
Machining
620.Preparation of electrospinning polystyrene nanofibrous membrame and nanofiltration for
simulated dyeing wastewater
Yang, Zuo Yi (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, NO.100 Waihuan Xi Road, Guangzhou, 510006, China); Ning, Xun An; Wang, Han;
Liu, Jing Yong Source: Applied Mechanics and Materials, v 55-57, p 1554-1559, 2011,
Recent Trends in Materials and Mechanical Engineering Materials, Mechatronics and Automation
621.The optimization of independent and absolutely additive system
Zhou, Xiao-Ping (Institute of System Engineering, Guangdong University of Technology,
Guangdong Induestry Technical Colleg 2, Guangzhou, China); Guo, Kai-Zhong Source: 2011
International Conference on E-Business and E-Government, ICEE2011 - Proceedings, p
1782-1785, 2011, 2011 International Conference on E-Business and E-Government, ICEE2011
- Proceedings
622.LS-SVM based self-learning tremor controller for microsurgery
Liu, Zhi (Department of Automation, Guangdong University of Technology, Guangzhou, China);
Wu, Qi-Hang; Zhang, Yun Source: Advanced Materials Research, v 255-260, p 1999-2003,
2011, Advances in Civil Engineering
623.Study on multimode intelligent control for ship steering system
Wang, Minghui (Faculty of Computer Science, Guangdong University of Technology, China); Yu,
Yongquan; Zeng, Bi Source: Applied Mechanics and Materials, v 58-60, p 2621-2633, 2011,
Information Technology for Manufacturing Systems II
624.Experimental investigation and research on forming process of micro flat-wire
Fok, Chunchiu (Guangdong University of Technology, Canton, Guangdong Province 510006,
China); Guo, Zhongning; Yu, Zhaoqin; He, Jianwen Source: Applied Mechanics and Materials, v
37-38, p 417-423, 2010, Advances in Engineering Design and Optimization
625.Research on context-aware scheduling algorithms in pervasive computing environments
Fu, Xiufen (Faculty of Computer, Guangdong University of Technology, Guangzhou, 510006,
China); Lv, Zhande; Huang, Weiqiang Source: ICPCA10 - 5th International Conference on
Pervasive Computing and Applications, p 277-282, 2010, ICPCA10 - 5th International
Conference on Pervasive Computing and Applications
626.Performance analysis based on transform matrix of MLE in CICA
Wang, Zhenyou (College of Mathematics, Guangdong University of Technology, 510006
Guangzhou, China); Gao, Xuejun Source: Proceedings - 2010 International Conference on
Computational Intelligence and Security, CIS 2010, p 227-229, 2010, Proceedings - 2010
International Conference on Computational Intelligence and Security, CIS 2010
627.Matching operation constrained job shop scheduling problem based on backward heuristic
scheduling algorithm
Jiang, Lili (Faculty of Electro Mechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Zhao, Fang; Xi, Xiaoying Source: 2nd International Conference on
Information Science and Engineering, ICISE2010 - Proceedings, p 336-339, 2010, 2nd
International Conference on Information Science and Engineering, ICISE2010 - Proceedings
628.Mechanical analysis of rubberized concrete subjected to uniaxial compression on meso-level
Liu, Feng (Institute of Engineering Mechanics, Guangdong University of Technology, Guangzhou
510006, China); Zhong, Gen-Quan; Xia, Xiao-Zhou; Li, Li-Juan Source: Jianzhu Cailiao
Xuebao/Journal of Building Materials, v 13, n 6, p 733-738, December 2010
629.WMIC and the RPC in the enterprise application integration
Wang, Yao (Computer Intelligence and Intelligent Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, China); Yu, Yongquan Source: 2010 International
Conference on Multimedia Technology, ICMT 2010, 2010, 2010 International Conference on
Multimedia Technology, ICMT 2010
630.351nm excimer large-area lithography by scanning and projection
Zhou, Jinyun (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Ouyang, Qin; Lin, Qinghua; Pei, Wenyan Source:
Advanced Materials Research, v 139-141, p 758-761, 2010, Manufacturing Engineering and
Automation I
631.Research on the constraint mechanism of abrasive particle of MR effect-based tiny-grinding
wheel
Chai, Jingfu (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Yan, Qiusheng; Kong, Lingye; Li, Min Source: Advanced Materials Research, v 135, p
46-51, 2010, Surface Finishing Technology and Surface Engineering II
632.Optimal design of rotary ultrasonic vibrator and research on its machining experiments
Tang, Yongjun (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Chen, Chunmu; Zhang, Yongjun; Liu, Guoyue Source: Advanced Materials Research, v
135, p 349-354, 2010, Surface Finishing Technology and Surface Engineering II
633.Exact symbol error rate of a cooperative network with multiple antennas and OSTBC
Li, Guangping (Faculty of Information Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Blostein, Steven D. Source: International Conference on
Communication Technology Proceedings, ICCT, p 1023-1026, 2010, Proceedings - 2010 IEEE
12th International Conference on Communication Technology, ICCT'2010
634.Effect of abrasive on the machining performance of the EMR-effect-based tiny-grinding
wheel
Lu, Jiabin (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Yan, Qiusheng; Tian, Hong; Gao, Weiqiang Source: Advanced Materials Research, v
135, p 24-29, 2010, Surface Finishing Technology and Surface Engineering II
635.A new pattern recognition algorithm and its application about tongue fur image classification
of traditional Chinese medicine
Wei, Yuke (Faculty of Computer, Guangdong University of Technology, Guangzhou , 510006,
China); Li, Jiangping; Chen, Qun; Liu, Mei Source: Proceedings - 2010 3rd International
Conference on Biomedical Engineering and Informatics, BMEI 2010, v 1, p 37-40, 2010,
Proceedings - 2010 3rd International Conference on Biomedical Engineering and Informatics,
BMEI 2010
636.Polynomial smooth epsilon-support vector regression based on Hermite interpolation
Ren, Bin (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Cheng, Lianglun Source: Journal of Computational Information Systems, v 6, n 13, p
4523-4532, December 2010
637.Simulation of the combination extruding and punching process for a thick-plate with tubular
bulge
Liu, Dan (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou,
Guangdong, 510006, China); Xiao, Xiao-Ting; Liao, Yi-Juan Source: Cailiao Kexue yu
Gongyi/Material Science and Technology, v 18, n SUPPL. 1, p 214-218, December 2010
638.An improved security technique for the terminal sensitive documents
Ling, Jie (Faculty of Computer, Guangdong University of Technology, Guangzhou, 510006,
China); Li, Jizhong Source: Proceeding - 5th International Conference on Computer Sciences and
Convergence Information Technology, ICCIT 2010, p 1028-1031, 2010, Proceeding - 5th
International Conference on Computer Sciences and Convergence Information Technology, ICCIT
2010
639.Multi-channel waveguides based on two dimensional phononic crystals
Zhang, Xin (Department of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Wu, Fu-Gen Source: Proceedings of the 2010
Symposium on Piezoelectricity, Acoustic Waves and Device Applications, SPAWDA10, p 60-63,
2010, Proceedings of the 2010 Symposium on Piezoelectricity, Acoustic Waves and Device
Applications, SPAWDA10
640.The research for extension software data structure
Wu, Xiao-Mao (Faculty of Computer, Guangdong University of technology, Guangzhou, China);
Guo, Hui-Ming; Yu, Yong-Quan Source: Advanced Materials Research, v 121-122, p 849-853,
2010, Nanotechnology and Computer Engineering
641.A robust design method for fluid line disppensing
Zhao, Yi-Xiang (Faculty of Electro-Mechanical Engineering, Guangdong University of
Technology, Guangzhou, China); Chen, Xin-Du Source: Proceedings - 2010 International
Conference on Digital Manufacturing and Automation, ICDMA 2010, v 1, p 113-116, 2010,
Proceedings - 2010 International Conference on Digital Manufacturing and Automation, ICDMA
2010
642.A cooperative network intrusion detection based on heterogeneous distance function
clustering
Teng, Shaohua (Faculty of Computer, Guangdong University of Technology, Guangzhou City,
China); Du, Hongle; Zhang, Wei; Fu, Xiufen; Li, Xiaocong Source: Proceedings of the 2010 14th
International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010, p
140-145, 2010, Proceedings of the 2010 14th International Conference on Computer
Supported Cooperative Work in Design, CSCWD 2010
643.Experimental and FEM modal analysis of workbench for PCB drilling machine
Tang, Hongqun (Guangdong University of Technology, Guangzhou, China); Wang, Chengyong;
Wang, Bing; Huang, Lixin; Hu, Shanshan; Chen, Zhishun Source: Advanced Materials Research,
v 139-141, p 2446-2451, 2010, Manufacturing Engineering and Automation I
644.The effect of positioning error and noise on the accuracy for spindle rotation error
measurement with three-point method
Huang, Jian Jian (Guangdong University of Technology, Guangzhou 510006, China); Ma, Ping; Li,
Duan Neng Source: 2nd International Conference on Information Science and Engineering,
ICISE2010 - Proceedings, p 1596-1599, 2010, 2nd International Conference on Information
Science and Engineering, ICISE2010 - Proceedings
645.Branch and bound method with heuristic algorithm for a special flexible flow shop scheduling
problem
Li, Zhantao (Guangdong University of Technology, Guangzhou 510006, China); Hong, Fu; Chen,
Qingxin; Mao, Ning Source: Advanced Materials Research, v 139-141, p 1530-1534, 2010,
Manufacturing Engineering and Automation I
646.Simulated analysis of flow and deformation in unilateral constrained and asymmetric square
cup deep-drawing
Huang, Li-Cheng (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Xiao, Xiao-Ting Source: Cailiao Kexue yu Gongyi/Material Science
and Technology, v 18, n SUPPL. 1, p 252-254, December 2010
647.A new clustering algorithm based on normalized signal for sparse component analysis
Yang, Jun-Jie (Faculty of Mathematics, Guangdong University of Technology, Guangzhou, China);
Liu, Hai-Lin Source: Proceedings - 2010 International Conference on Computational Intelligence
and Security, CIS 2010, p 60-63, 2010, Proceedings - 2010 International Conference on
Computational Intelligence and Security, CIS 2010
648.A study on the relationship between IT capabilities, organization structure and enterprise
performance: Empirical research through the manufacturing enterprises in PRD
Xie, Weihong (School of Management, Guangdong University of Technology (GDUT),
Guangzhou 510520, China); Wang, Yongjian; Jiang, Luan; Zhang, Guangyu Source: Proceedings 2010 International Forum on Information Technology and Applications, IFITA 2010, v 3, p
373-376, 2010, Proceedings - 2010 International Forum on Information Technology and
Applications, IFITA 2010
649.The explicit finite element method in time domain for analysis of equivalent input of
three-dimensional dynamic SSI system
Yang, Xiaomei (Guangdong University of Technology, Guangzhou 510643, China); Guan, Huimin;
Zhang, Xuesheng; Yang, Baipo Source: Tumu Gongcheng Xuebao/China Civil Engineering
Journal, v 43, n SUPPL. 1, p 535-540, November 2010
650.The comparison of two kinds of reproduction in multiobjective optimization
Yao, Xue-Fei (Faculty of Applied Mathematics, Guangdong University of Technology, Guangzhou,
510009, China); Liu, Hai-Lin Source: Proceedings - 2010 International Conference on
Computational Intelligence and Security, CIS 2010, p 95-99, 2010, Proceedings - 2010
International Conference on Computational Intelligence and Security, CIS 2010
651.3D modeling method for computer animate based on a modified weak structured light method
Xiong, Hanwei (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou Higher Education Mega Center, No. 100 Waihuan Xi Road, Guangzhou, China); Pan,
Ming; Zhang, Xiangwei Source: Proceedings of SPIE - The International Society for Optical
Engineering, v 7850, 2010, Optoelectronic Imaging and Multimedia Technology
652.Petri net modeling and deadlock analysis of multicluster tools in semiconductor
manufacturing
Zhu, Qinghua (School of Mechatronics Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Wu, Naiqi; Teng, Shaohua Source: Dongnan Daxue Xuebao (Ziran
Kexue Ban)/Journal of Southeast University (Natural Science Edition), v 40, n SUPPL. 2, p
267-271, November 2010
653.The development of optical fringe measurement system integrated with a CMM for products
inspection
Xiong, Hanwei (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou Higher Education Mega Center, No. 100 Waihuan Xi Road, Panyu District,
Guangzhou, China); Pan, Ming; Zhang, Xiangwei Source: Proceedings of SPIE - The
International Society for Optical Engineering, v 7855, 2010, Optical Metrology and
Inspection for Industrial Applications
654.Research on the architecture of mould manufacturing grid
Wang, Zongzhong (School of Mechanical and Electronic Engineering, Guangdong University of
Technology, Guangzhou, China); Huang, George Q. Source: Proceedings - 2010 International
Conference on Manufacturing Automation, ICMA 2010, p 210-216, 2010, Proceedings - 2010
International Conference on Manufacturing Automation, ICMA 2010
655.Conformal least-squares deformations for 2D shapes
Li, Zheng (Faculty of Computer, Guangdong University of Technology, Guangzhou 510006,
China) Source: Journal of Information and Computational Science, v 7, n 12, p 2521-2528,
December 2010
656.Three registration strategies for point clouds in optical inspection of free form shaped plastic
parts
Xiong, Hanwei (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou Higher Education Mega Center, No. 100 Waihuan Xi Road, Panyu District,
Guangzhou, China); Pan, Ming; Zhang, Xiangwei Source: Proceedings of SPIE - The
International Society for Optical Engineering, v 7855, 2010, Optical Metrology and
Inspection for Industrial Applications
657.Characteristics and polishing effect of abrasive jet beam with polymer abrasive suspension
additives
Luo, Wusheng (Guangdong University of Technology, Guangzhou, China); Wang, Chengyong;
Song, Yuexian; Liao, Yanpei Source: Advanced Materials Research, v 126-128, p 9-13, 2010,
Advances in Abrasive Technology XIII
658.Preparation and detection of egg yolk antibody against Streptococcus pneumonia
Liu, Duan (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, China); Su, Juan; Zhang, Kun; Zhao, Suqing; Zhu, Wubiao Source:
Proceedings - 2010 3rd International Conference on Biomedical Engineering and Informatics,
BMEI 2010, v 6, p 2585-2588, 2010, Proceedings - 2010 3rd International Conference on
Biomedical Engineering and Informatics, BMEI 2010
659.Sensorless speed control of the switched reluctance motor using extended Kalman filter
Li, Yu-Zhou (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, Guangdong Province, China); Zhao, Ke-Gang Source: 2nd International Conference
on Information Science and Engineering, ICISE2010 - Proceedings, p 2375-2378, 2010, 2nd
International Conference on Information Science and Engineering, ICISE2010 - Proceedings
660.A novel MPR approach based on inverse-traversing of Multi-Labeled Tree
Jiang, Wenchao (Information Engineering College, Guangdong University of Technology,
GuangZhou, 510006, China); Dai, Qingyun; Zhou, Yanhong; Liu, Rong Source: Proceedings 2010 International Conference on Intelligent Computing and Integrated Systems, ICISS2010, p
273-276, 2010, Proceedings - 2010 International Conference on Intelligent Computing and
Integrated Systems, ICISS2010
661.Visual technique for detecting weld position based on hough transformation
Li, Zhaoyu (Department of Mechanical and Electrical Engineering, Guangdong University of
Technology, China); Gao, Xiangdong; Zhu, Xinghuan; Lin, Jianwen Source: Advanced Materials
Research, v 139-141, p 2059-2062, 2010, Manufacturing Engineering and Automation I
662.Operations and properties of fuzzy logic systems
Wang, Wenli (Faculty of Application Mathematics, Guangdong University of Technology,
Guangzhou, 510006, China); Wang, Yinhe; Zhang, Yun Source: International Journal of Fuzzy
Systems, v 12, n 4, p 273-279, December 2010
663.Modeling the material removal rate in micro abrasive water jet machining of glasses
Fan, Jingming (School of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Fan, Changming; Wang, Jun Source: Advanced Materials Research,
v 135, p 370-375, 2010, Surface Finishing Technology and Surface Engineering II
664.Experimental study of laser dicing sapphire substrate by green DPSS laser
Xie, Xiao-Zhu (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, Guangdong, 510006, China); Huang, Fu-Min; Xin, Wei; Wei, Hu; Ren, Qing-Lei
Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7844,
2010, Semiconductor Lasers and Applications IV
665.Moving target detection based on reconfigurable video processing technology
Wang, Qi (Faculty of Information Engineering, Guangdong University of Technology, Guangzhou,
510006, China); Wu, Liming; Lin, Hui; Wang, Feng Source: Proceedings - 2010 International
Symposium on Computational Intelligence and Design, ISCID 2010, v 2, p 87-90, 2010,
Proceedings - 2010 International Symposium on Computational Intelligence and Design, ISCID
2010
666.Iterative belief revision in partial observable non-deterministic planning
Rao, Dongning (Faculty of Computer, Guangdong University of Technology, Guangzhou, China);
Jiang, Zhihua Source: Proceedings - 4th International Conference on Genetic and Evolutionary
Computing, ICGEC 2010, p 146-150, 2010, Proceedings - 4th International Conference on
Genetic and Evolutionary Computing, ICGEC 2010
667.Prediction discrete data used BP network based on AGO
Gao, Xuejun (College of Mathematics, Guangdong University of Technology, 510006 Guangzhou,
China); Wang, Zhenyou Source: Proceedings - 2010 International Conference on Computational
Intelligence and Security, CIS 2010, p 218-222, 2010, Proceedings - 2010 International
Conference on Computational Intelligence and Security, CIS 2010
668.Dissipative-based function of subject librarian system in scientific research
Chen, Weili (Library, Guangdong University of Technology, Guangzhou, China); Pei, Yu; Bai,
Xiumei Source: Proceedings of the 2010 IEEE International Conference on Progress in
Informatics and Computing, PIC 2010, v 2, p 1275-1279, 2010, Proceedings of the 2010
IEEE International Conference on Progress in Informatics and Computing, PIC 2010
669.Research on IETM data processing based on XML
Huang, Guoliang (Faculty of Electromechanical Engineering, Guangdong University of
Technology, Guangzhou, China); Jiang, Lili Source: Proceedings - International Conference on
Electrical and Control Engineering, ICECE 2010, p 2941-2943, 2010, Proceedings International Conference on Electrical and Control Engineering, ICECE 2010
670.The influencing factors of branch height in T-shaped tube hydroforming
Wen, Hua-Dian (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Xiao, Xiao-Ting; Chen, Ying; Zhang, Kai Source: Cailiao Kexue yu
Gongyi/Material Science and Technology, v 18, n SUPPL. 1, p 143-146, December 2010
671.A hybrid chaotic quantum evolutionary algorithm
Cai, Yanguang (Faculty of Automation, Guangdong University of Technology, Guangzhou, China);
Zhang, Minjie; Cai, Hao Source: Proceedings - 2010 IEEE International Conference on Intelligent
Computing and Intelligent Systems, ICIS 2010, v 2, p 771-776, 2010, Proceedings - 2010
IEEE International Conference on Intelligent Computing and Intelligent Systems, ICIS 2010
672.Research of Electrochemical Polishing Mixed with Powder and related experiments
Zhang, Yongjun (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Tang, Yongjun; Li, Feng Source: Advanced Materials Research, v 135, p 413-417,
2010, Surface Finishing Technology and Surface Engineering II
673.A new simulation system of programmable logic controller
Hu, Zhaoyong (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); He, Hanwu; Duan, Yutao Source: Advanced Materials Research, v
139-141, p 1954-1958, 2010, Manufacturing Engineering and Automation I
674.Study on limit drawing ratio of cylindrical cup with prefabricate-holes
Xiao, Xiao-Ting (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Liu, Dan; Liao, Yi-Juan; Chen, Deng Source: Cailiao Kexue yu
Gongyi/Material Science and Technology, v 18, n SUPPL. 1, p 116-119, December 2010
675.Test for optical systems in laser projection imaging for PCB
Qin, Ouyang (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhou, Jinyun; Lei, Liang; Lin, Qinghua Source:
Proceedings of SPIE - The International Society for Optical Engineering, v 7849, 2010,
Optical Design and Testing IV
676.Optimization of magneto rheological damper based on the first order optimization
Ma, Ping (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Tang, Yongbo; Gong, Zheng Source: Advanced Materials Research,
v 135, p 249-254, 2010, Surface Finishing Technology and Surface Engineering II
677.Evaluation of T wave alternans detectors based on a simulation study
Wan, Xiankui (Information Engineering College, Guangdong University of Technology,
Guangzhou, China); Xu, Du; Xie, Fulan Source: Proceedings of the 2010 IEEE International
Conference on Progress in Informatics and Computing, PIC 2010, v 2, p 1184-1188, 2010,
Proceedings of the 2010 IEEE International Conference on Progress in Informatics and
Computing, PIC 2010
678.A classification algorithm based on simplified fuzzy rules base
He, Yong (School of Management, Guangdong University of Technology, Guangzhou 510520,
China) Source: 2010 3rd International Symposium on Knowledge Acquisition and Modeling,
KAM 2010, p 254-257, 2010, 2010 3rd International Symposium on Knowledge Acquisition
and Modeling, KAM 2010
679.A research on intrusion detection based on support vector machines
Fang, Xiaozhao (Faculty of Computer, Guangdong University of Technology, Guangzhou,
Guangdong, China); Zhang, Wei; Teng, Shaohua; Han, Na Source: Proceedings - 2010
International Conference on Communications and Intelligence Information Security, ICCIIS 2010,
p 109-112, 2010, Proceedings - 2010 International Conference on Communications and
Intelligence Information Security, ICCIIS 2010
680.An ensemble vector median filter for color image denoising
Zhong, Ling (Automation Faculty, Guangdong University of Technology, Guangzhou, Guangdong,
China); Zhang, Yun; Xing, Yan Source: 11th International Conference on Control, Automation,
Robotics and Vision, ICARCV 2010, p 2485-2490, 2010, 11th International Conference on
Control, Automation, Robotics and Vision, ICARCV 2010
681.An ECG T waves detection scheme based on the compensatory criterion
Wan, Xiankui (Information Engineering College, Guangdong University of Technology,
Guangzhou, China); Xu, Du Source: Proceedings - 2010 3rd International Conference on
Biomedical Engineering and Informatics, BMEI 2010, v 2, p 730-734, 2010, Proceedings 2010 3rd International Conference on Biomedical Engineering and Informatics, BMEI 2010
682.An improved genetic algorithm for optimizing resource allocation using knowledge evolution
and natural evolution
Tang, Ping (Guangdong University of Technology, Guangzhou 510006, China); Lee, Gordon; Lu,
Fei; Gao, Changqing; Tang, Cheng Source: 2010 World Automation Congress, WAC 2010, 2010,
2010 World Automation Congress, WAC 2010
683.A new lip-automatic detection and location algorithm in lip-reading system
Huang, Yong-Hui (Faculty of Automation, Guangdong University of Technology, Guangzhou
510006, China); Pan, Baa-Chang; Liang, Jian; Fan, Xiao-Yan Source: Conference Proceedings IEEE International Conference on Systems, Man and Cybernetics, p 2402-2405, 2010, 2010
IEEE International Conference on Systems, Man and Cybernetics, SMC 2010
684.Marker localization for educational game in virtual environment
He, Han-Wu (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Duan, Xian-Yin; Wu, Yue-Ming Source: ICALIP 2010 - 2010
International Conference on Audio, Language and Image Processing, Proceedings, p 881-885,
2010, ICALIP 2010 - 2010 International Conference on Audio, Language and Image Processing,
Proceedings
685.The structure design and finite element analysis of the self-moving silent piler based on the
pile reaction force
Zhou, Weibing (Guangdong University of Technology, Guangzhou, Guangdong Province, 510006,
China); Ouyang, Xiangbo; Li, Ketian Source: Applied Mechanics and Materials, v 37-38, p
1571-1576, 2010, Advances in Engineering Design and Optimization
686.The FNN quilting process deformation prediction model
Tang, Luxin (Information Engineering College, Guangdong University of Technology,
GuangZhou, China); Bin, Bin; Han, Kun Source: Applied Mechanics and Materials, v 34-35, p
306-310, 2010, Mechanical Engineering and Green Manufacturing
687.Optical properties of nanocrystalline (Ba,Ca)TiO<inf>3</inf> thin films grown on Pt-coated
silicon substrates
Li, Qun (School of Physics and Optoelectric Engineering, Guangdong University of Technology,
Guangzhou Higher Education Mega Center, Guangzhou 510006, China); Tang, Xin-Gui Source:
Ferroelectrics, v 405, n 1, p 268-274, 2010, 12th International Meeting on Ferroelectricity,
IMF-12 and the 18th IEEE International Symposium on Applications of Ferroelectrics, ISAF-18
688.Traffic flow state-forecasting algorithm based on Sugeno neural fuzzy system
Fu, Hui (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou Guangdong 510006, China); Xu, Lun-Hui; Hu, Gang; Wang, Yong Source: Kongzhi
Lilun Yu Yingyong/Control Theory and Applications, v 27, n 12, p 1637-1640, December 2010
689.WMIC in the remote monitoring system
Wang, Yao (Computer Intelligence and Intelligent Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, China); Yu, Yongquan Source: 2010 International
Conference on Multimedia Technology, ICMT 2010, 2010, 2010 International Conference on
Multimedia Technology, ICMT 2010
690.Traffic sign recognition based on SIFT features
Cai, Nian (School of Information Engineering, Guangdong University of Technology, Guangzhou
510006, China); Liang, Wenzhao; Xu, Shaoqiu; Li, Fangzhen Source: Advanced Materials
Research, v 121-122, p 596-599, 2010, Nanotechnology and Computer Engineering
691.Method and application of acquiring extension classification knowledge
Li, Xiaomei (Faculty of Computer Dept., Guangdong University of Technology, Guangzhou,
China); Yang, Chunyan Source: Proceedings - 2010 3rd International Conference on Biomedical
Engineering and Informatics, BMEI 2010, v 7, p 2913-2917, 2010, Proceedings - 2010 3rd
International Conference on Biomedical Engineering and Informatics, BMEI 2010
692.Design of embedded numerical control platform for carton samplemaker
Liu, Jianqun (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Wu, Jirong; Xu, Dong Source: Advanced Materials Research, v 139-141, p
2234-2238, 2010, Manufacturing Engineering and Automation I
693.Optimal tuning PID controller for first order lag plus time delay system by Election Campaign
Optimization algorithm
Lv, Wenge (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Li, Deyuan; Cheng, Siyuan; Luo, Shaoming; Chen, Zeyu Source:
Proceedings - International Conference on Electrical and Control Engineering, ICECE 2010, p
1430-1433,
2010,
Proceedings - International Conference on Electrical and Control
Engineering, ICECE 2010
694.A novel method of wire detection combined PCNN with HT
Han, Guang (Automation College, Guangdong University of Technology, Guangzhou, 510006,
China); Zhang, Miao; Zhong, Yingchun; Wei, Lixing Source: Advanced Materials Research, v
139-141, p 2072-2075, 2010, Manufacturing Engineering and Automation I
695.Application of optimal control in inventory management of production
Sun, Pei-Hong (School of Management, Guangdong University of Technology, Guangzhou,
China); Tang, Lei; Tang, Liying Source: Applied Mechanics and Materials, v 29-32, p
2503-2508, 2010, Applied Mechanics and Mechanical Engineering
696.Experimental study on micro-nano scratching of mono-crystalline silicon wafer
Wei, Xin (Guangdong University of Technology, Guangzhou 510006, China); Chen, Zhuo; Xie,
Xiaozhu; Ren, Qinglei Source: Advanced Materials Research, v 135, p 458-461, 2010,
Surface Finishing Technology and Surface Engineering II
697.Geometric modeling for five-axis CNC machining of mold surface with flat-end tool
Gao, W.Q. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Xie, B.; Huang, Z.Y.; Qing, C.T. Source: Advanced Materials
Research, v 135, p 41-45, 2010, Surface Finishing Technology and Surface Engineering II
698.A comparative study on leadership mechanism of Sino-Norwegian bi-cultural teleworking
teams
He, Bin (Dept. of Management Science and Engineering, Guangdong University of Technology,
Guangzhou, Guangdong, 510520, China); Liu, Baozhen; Li, Lili; Sun, Jing; Wu, Siyue Source:
2010 International Conference on E-Product E-Service and E-Entertainment, ICEEE2010, 2010,
2010 International Conference on E-Product E-Service and E-Entertainment, ICEEE2010
699.Management mechanisms of BCT teams: A comparative study between China and Norway
He, Bin (Dept. of Management Science and Engineering, Guangdong University of Technology,
Guangzhou, Guangdong 510520, China); Sun, Jing; Li, Lili; Liu, Baozhen Source: 2010
International Conference on E-Product E-Service and E-Entertainment, ICEEE2010, 2010,
2010 International Conference on E-Product E-Service and E-Entertainment, ICEEE2010
700.Prediction of monthly average humidity of cities based on extension cluster model
Chen, Weiguo (Institute of Computer Science, Guangdong University of Technology, Guangzhou,
China); Wang, Wenjuan; Yu, Yongquan; Zhang, Hongna Source: 2nd International Conference on
Information Engineering and Computer Science - Proceedings, ICIECS 2010, 2010, 2nd
International Conference on Information Engineering and Computer Science - Proceedings,
ICIECS 2010
701.Semi-supervised classification with metric learning
Zhang, Gang (Faculty of Automation, GuangDong University of Technology, GuangZhou, China);
Cheng, Liang-Lun Source: Proceedings - 2010 2nd WRI Global Congress on Intelligent Systems,
GCIS 2010, v 3, p 123-126, 2010, Proceedings - 2010 2nd WRI Global Congress on
Intelligent Systems, GCIS 2010
702.A new kind of handling constraint method for optimization
Wen, Jiechang (Faculty of Applied Mathematics, Guangdong University of Technology,
Guangzhou, 510009, China); Yao, Xuefei Source: Proceedings - 2010 International Conference on
Computational Intelligence and Security, CIS 2010, p 104-108, 2010, Proceedings - 2010
International Conference on Computational Intelligence and Security, CIS 2010
703.A contrastive study on learning mechanism of Sino-Norwegian bi-cultural teleworking teams
Li, Lili (School of Management, Guangdong University of Technology, Guangzhou, Guangdong,
China); He, Bin; Liu, Baozhen; Sun, Jing Source: 2010 International Conference on E-Product
E-Service and E-Entertainment, ICEEE2010, 2010, 2010 International Conference on
E-Product E-Service and E-Entertainment, ICEEE2010
704.Optical trapping and manipulation of magnetic holes dispersed in a magnetic fluid
Sun, Ting (Laboratory of Photonic Information Technology, School for Information and
Optoelectronic Science and Engineering, South China Normal University, Guangzhou,
Guangdong 510006, China); Fu, Zhi-Cheng; Zhao, Wei-Ren; Deng, Hai-Dong; Dai, Qiao-Feng;
Wu, Li-Jun; Lan, Sheng; Gopal, Achanta Venu Source: Journal of Applied Physics, v 107, n 9,
May 1, 2010
705.Study on master-slave control method using load force and impedance identifiers for
Tele-operated hydraulic construction robot
Li, Xiao (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China) Source: Applied Mechanics and Materials, v 29-32, p 2170-2175,
2010, Applied Mechanics and Mechanical Engineering
706.Saddle-point equilibrium strategy for continuous singular bilinear system
Zhu, Huainian (School of Management, Guangdong University of Technology, Guangzhou,
Guangdong, China); Zhi, Jinghan; Zhang, Chengke; Bin, Ning; Sun, Pei-Hong Source:
Proceedings - International Conference on Electrical and Control Engineering, ICECE 2010, p
1851-1854,
2010,
Proceedings - International Conference on Electrical and Control
Engineering, ICECE 2010
707.A reconfigurable video moving target detection IP core
Wu, Liming (Faculty of Information Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Wang, Qi Source: Proceedings - 2010 International Conference on
Digital Manufacturing and Automation, ICDMA 2010, v 1, p 104-108, 2010, Proceedings 2010 International Conference on Digital Manufacturing and Automation, ICDMA 2010
708.Drilling force and temperature of bone by surgical drill
Yang, Yixin (Guangdong University of Technology, Guangzhou, China); Wang, Chengyong; Qin,
Zhe; Xu, Linlin; Song, Yuexian; Chen, Hanyuan Source: Advanced Materials Research, v
126-128, p 779-784, 2010, Advances in Abrasive Technology XIII
709.Experimental study on logistics customer complaint management
Li, Ze-Ping (School of Management, Guangdong University of Technology, Guangzhou,
Guangdong, 510520, China); Li, Li-Li; He, Bin; Liu, Jian-Ping Source: 2010 International
Conference on E-Product E-Service and E-Entertainment, ICEEE2010,
2010,
2010
International Conference on E-Product E-Service and E-Entertainment, ICEEE2010
710.A study of the localized Chinese animation development strategies: The thinking from the
animation brand of "Pleasant Goat"
Tang, Xiaoying (Art and Design School, Guangdong University of Technology, Guangzhou,
China) Source: 2010 IEEE 11th International Conference on Computer-Aided Industrial Design
and Conceptual Design, CAID and CD'2010, v 2, p 892-896, 2010, 2010 IEEE 11th
International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID
and CD'2010
711.Performance analysis of two-hop OSTBC transmission over rayleigh fading channels
Li, Guangping (Faculty of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Blostein, Steven D.; Qin, Jiayin Source: Eurasip Journal on Wireless
Communications and Networking, v 2010, 2010
712.Thermal conductivity of polyethylene glycol nanofluids containing carbon coated metal
nanoparticles
Zhang, Haiyan (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Wu, Qiguang; Lin, Jin; Chen, Jin; Xu, Zhuowen Source: Journal of
Applied Physics, v 108, n 12, December 15, 2010
713.Direct numerical solution of driven cavity flow with mixed cover manifold method for steady
incompressible Navier-Stokes equations
Zhang, Zhengrong (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Zhang, Xiangwei Source: Journal of Information and Computational
Science, v 7, n 8, p 1771-1783, August 2010
714.Constitutive equation for hardened SKD11 steel at high temperature and high strain rate using
the SHPB technique
Tang, D.W. (Guangdong University of Technology, Guangzhou 510006, China); Wang, C.Y.; Hu,
Y.N.; Song, Y.X. Source: Proceedings of SPIE - The International Society for Optical Engineering,
v 7522, 2010, Fourth International Conference on Experimental Mechanics
715.Computer vision-based augmented reality system for assembly interaction
He, Hanwu (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, Guangdong, China); Wu, Yueming; Zheng, Detao; Rao, Yong Source:
Applied Mechanics and Materials, v 37-38, p 263-269, 2010, Advances in Engineering
Design and Optimization
716.Economical analysis of waste tires disposal using thermal plasma technology
Tang, Lan (Department of Civil Engineering, Guangzhou University, Guangzhou 510006, China);
Xiong, Jianxin; Wang, Xiaoming; Wang, Huan; Hao, Haiqing; Wang, Yunhe; Zhu, Chihui; Huang,
Haitao Source: Proceedings - 2010 International Conference on Digital Manufacturing and
Automation, ICDMA 2010, v 1, p 600-603, 2010, Proceedings - 2010 International
Conference on Digital Manufacturing and Automation, ICDMA 2010
717.Predictive-reactive scheduling algorithm for multiple mould and die projects with uncertain
resources availabilities
Zhang, Sha-Qing (School of Mechatronics Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Chen, Xin-Du; Chen, Qing-Xin; Chen, Xin Source: Jisuanji Jicheng
Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, v 16, n 12, p 2688-2696,
December 2010
718.A potential green phosphor for application in PDP
Yang, Hong-Mei (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Shi, Jian-Xin; Gong, Meng-Lian; Liang, Hong-Bin
Source: Faguang Xuebao/Chinese Journal of Luminescence, v 31, n 6, p 791-795, December
2010
719.Interpretation and simulation of the JVM
Zhang, Hong-Na (Faculty of Computer, Guangdong University of Technology, Guangzhou,
China); Liu, Yi-Jun Source: Proceedings - 3rd International Symposium on Information
Processing, ISIP 2010, p 98-101, 2010, Proceedings - 3rd International Symposium on
Information Processing, ISIP 2010
720.Application of the election campaign optimization algorithm to engineering optimum design
problems
He, Chunhua (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou,
China); Zhang, Xiangwei Source: Proceedings - 2010 International Symposium on Computational
Intelligence and Design, ISCID 2010, v 2, p 34-37, 2010, Proceedings - 2010 International
Symposium on Computational Intelligence and Design, ISCID 2010
721.Research on the approach of task decomposition in soccer robot system
Chen, Jianping (Faculty of Automation, Guangdong University of Technology, Guangzhou,
China); Yang, Yimin; Wei, Liang Source: Proceedings - 2010 International Conference on Digital
Manufacturing and Automation, ICDMA 2010, v 2, p 284-289, 2010, Proceedings - 2010
International Conference on Digital Manufacturing and Automation, ICDMA 2010
722.Adaptive evolutionary algorithm for traffic grooming in wavelength-division multiplexing
networks
Han, Yi-Shi (Guangdong University of Technology, Faculty of Information Engineering,
Guangzhou 510006, China); Xu, Bin; Ao, Zhan-Bin; Rao, Xiao-Dong Source: Optical
Engineering, v 49, n 3, 2010
723.An investigation on PRMMC polishing with electrochemical mechanical machining process
Liu, G.Y. (Faculty of Electromechanical Engineering, Guangdong University of Technology
Guangzhou, China); Guo, Z.N.; Li, Y.B.; Huang, Z.G. Source: Advanced Materials Research, v
135, p 226-231, 2010, Surface Finishing Technology and Surface Engineering II
724.A relation-based model for convergence analysis of evolutionary algorithm
Hao, Zhi-Feng (Faculty of Computer, Guangdong University of Technology, Guangzhou 510006,
China); Huang, Han; Li, Haozhe; Ling, Shaohu; Li, Benqing Source: Lecture Notes in Computer
Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in
Bioinformatics), v 6466 LNCS, p 190-197, 2010, Swarm, Evolutionary, and Memetic
Computing - First International Conference on Swarm, Evolutionary, and Memetic Computing,
SEMCCO 2010, Proceedings
725.Generation of hyperchaotic Chua system via state feedback control
Xi, Huiling (College of Automation, Guangdong University of Technology,
Guangzhou,Guangdong,510006, China); Yu, Simin; Zhang, Zhaoxia; Deng, Kuibiao Source:
Proceedings - 2010 International Workshop on Chaos-Fractal Theories and Applications, IWCFTA
2010, p 92-96, 2010, Proceedings - 2010 International Workshop on Chaos-Fractal Theories
and Applications, IWCFTA 2010
726.Study of RFID indoor location algorithm based on region division
Zhang, Xiaobo (Faculty of Automation, Guangdong University of Technology, Guangzhou
510006, China); Cheng, Lianglun; Zhu, Quanmin Source: Journal of Information and
Computational Science, v 7, n 14, p 3051-3058, December 2010
727.Monitoring of drilling tool condition through spindle current
Ao, Yinhui (School of Mechanical and Electrical Engineering, Guangdong University of
Technology, Guangzhou, China) Source: Advanced Materials Research, v 139-141, p 2595-2598,
2010, Manufacturing Engineering and Automation I
728.HUST-BioGrid: The deployment and evaluation of a bioinformatics grid platform
Jiang, Wenchao (Information Engineering College of Guangdong, University of Technology,
GuangZhou, 510006, China); Dai, Qingyun; Zhou, Yanhong Source: Proceedings - 2010 3rd
International Conference on Biomedical Engineering and Informatics, BMEI 2010, v 7, p
2785-2789,
2010,
Proceedings - 2010 3rd International Conference on Biomedical
Engineering and Informatics, BMEI 2010
729.Ultra smooth planarization polishing technique based on the cluster magnetorheological effect
Yan, Qiusheng (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Yan, Jiewen; Lu, Jiabin; Gao, Weiqiang Source: Advanced Materials Research, v 135, p
18-23, 2010, Surface Finishing Technology and Surface Engineering II
730. Developing a model for the emergency rescue routing problem using stochastic programming
theory
Fu,. Hui (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Zhang, Zi; Hu, Gang Source: 2010 International Conference on Logistics
Engineering and Intelligent Transportation Systems, LEITS2010 - Proceedings, p 67-70, 2010,
2010 International Conference on Logistics Engineering and Intelligent Transportation Systems,
LEITS2010 - Proceedings
731.Research and design of e-commerce semantic search
Liu, Zhusong (Faculty of Computer, Guangdong University of Technology, Guangzhou 510006,
China); Zhang, Yuqin Source: Proceedings - 3rd International Conference on Information
Management, Innovation Management and Industrial Engineering, ICIII 2010, v 4, p 332-334,
2010, Proceedings - 3rd International Conference on Information Management, Innovation
Management and Industrial Engineering, ICIII 2010