Dear Members,
Welcome to the 296th newsletter from URMS.
On the New York Mercantile Exchange, light sweet crude for June delivery climbed 70 cents to
settle at US$69.23 per barrel. Meanwhile, July Brent crude on the ICE Futures exchange in
London increased by 67 cents to settle at US$69.35.
U.S. National Oceanic and Atmospheric Administration said 2006 Atlantic hurricane season,
which starts on June 1, could bring up to 10 hurricanes, a potential threat to U.S. energy
infrastructure still recovering from last year's storms. Last year's hurricanes temporarily
knocked out a quarter of U.S. crude and fuel production, toppling offshore platforms,
destroying undersea pipelines, flooding coastal refineries, and sending energy prices over $70
for the first time.
Thank you for subscribing the URMS newsletter, please do not hesitate to send us your
comments and suggestions via service@urms.com. Thank you!
Global Industry News Briefs
Textile 3
HTTL To Launch Weaving Factory In Uttaranchal
May 24, 2005
News released Hanung Toys and Textiles Ltd (HTTL) is going to set up a weaving
plant in Uttaranchal with a capital investment of Rs160 crore.
Polymer Group Inc. Profitability Gains
May 23, 2005
According to sources, Polymer Group Inc., has reported a net loss of $1.6 million for
the first quarter compared with a profit of $5.2 million a year ago.
Lenzing Sales Rise In First Quarter
May 22, 2005
Sources said that, Fibre maker Lenzing AG, Austria, has reported a marked increase
in sales during the first quarter of this year but profit was lower than the record figure
achieved a year ago.
Plastics 3
Pemex Reunites Petchems Subsidiaries
May 24, 2005
The seven autonomous units of Pemex Petroquimica - the petrochemicals subsidariy
of the state oil company - have been merged back into one.
New Bioplastic For Use In Automotive Interiors
May 23, 2005
News released Mazda in conjunction with Nishikawa Rubber Co., Hiroshima and Kinki
Universities, has developed a new high-strength, heat resistant bioplastic for use in
automotive interior parts.
Bayer Plans PC Expansion In Asia
May 22, 2005
According to sources, strong regional demand has spurred Bayer MaterialScience to
bring forward investment plans in China and double PC production to a total capacity
of 200,000tpa by as early as 2007.
Petrochemicals 3
TPX Aims To Bring On-stream Its New BTX Unit
May 24, 2005
According to sources, Thai Paraxylene (TPX) plans to start-up its new aromatics plant
by 2008.
DuPont's New TiO2 Plant In China
May 23, 2005
Sources said that DuPont Titanium Technologies plans to build a new world-class
titanium dioxide plant at Dongying, Shandong Province, PRC.
PTT Chemical Sees Revenues Rising
May 22, 2005
PTT Chemical Plc (PTTCH) expected revenues to rise to 63 billion baht this year and
to 70 billion baht in 2007.
Spotlight
No. of buyers registered: 2501
No. of suppliers registered: 495
New Products
Textile
DTY 215D/84F, DTY75D/24F, FDY75D/24F, POY75D/24F
Application: sarees, dress material, suiting and shirting
Manufacturer: Xinsheng Chemical Fiber Factory of Wujiang
7Dx64mm non-siliconized fire retardant PSF
Characteristics: Fire retardant, three-dimension, onal spiral, warm, non-silicone
Application: cushions, pillows, duvets, pet basket liners/cushions, wheelchair liners, cushion
bolsters
Manufacturer: ShinKong Synthetic Fibers Corporation
JOINER
Characteristics: Heat-adhesive nature, strong bond, freely applied with other fiber,
outmatched adhesion
Application: Chenille Yarns, tapes for hemming (trousers, skirts etc.), Mop Yarn, to prevent
the fraying of fabrics and yarns, other spot adhesion applications
Manufacturer: Fiji Spinning Co., Ltd.
Delight
Characteristics: Fastest drying; Excellent breathability; Easy of care
Application: Sports, pants, shirts, jacket, golf wear, underwear, socks, hats, bra, gloves,
compression, sleeve
Manufacturer: Lan Fa Textile Co., Ltd.
Coolplus
Characteristics: High diffusion ability; High drying effect; Efficient breathability
Application: Sports, pants, shirts, jacket, golf wear, underwear, socks, hats, bra, gloves,
compression, sleeve
Manufacturer: Chung Shing Textile Co., Ltd.
Plastics
EVATHENE UE632
Characteristics: excellent characteristics including flexibility, elasticity, transparency,
non-toxicity, good resistance to environmental stress cracking, low temperature flexibility, easy
processability and etc
Application: casting and co-extrusion for special packaging of hospital and medical materials,
food packaging and other packaging
Manufacturer: USI Far East Corporation
EPS-301General Purpose Grades
Characteristics: Can be processed over a wide range of molding conditions, good strength,
short cycle time, low steam consumption, and suitable for block case molding
Application：packing for electronic/electrical appliances, chinawares and glasswares, packing
for frozen foods, insulations tubes and plates etc, construction materials, arts and crafts
materials etc.
Manufacturer：TAITACELL Chemical Co., Ltd.
EPS-391Fast-Molding Grades
Characteristics: short cycle time and condition time, can be processed over a wide range of
molding conditions, good strength, short cycle time, low steam consumption, and suitable for
block case molding
Application：packing for electronic/electrical appliances, chinawares and glasswares etc,
thermal insulation, e.g. packing for frozen foods, insulation tubes and plates etc
Manufacturer：TAITACELL Chemical Co., Ltd.
GPPS-SC201LV
Characteristics: Very high molecular weight, good flow, excellent clarity
Application：embossed sheet, ball pen barrel, refrigerator components, large moldings etc.
Manufacturer：Supreme Petrochem Limited
GPPS-SC202EL
Characteristics: High strength, excellent process ability
Application：CD jewel boxes, audio cassettes, medical disposables etc.
Manufacturer：Supreme Petrochem Limited
GPPS-SC206
Characteristics: Easy flow, good heat resistance
Application：disposable medical parts, ctrystal-ware, beads, bangles, general packaging, thin
wall cups etc.
Manufacturer：Supreme Petrochem Limited
Speciality HIPS-SH2157
Characteristics: superior resistance against chemical blowing agents
Application：refrigerator door/cabinet liners, dairy containers, margarine packing etc.
Manufacturer：Supreme Petrochem Limited
GPPS-SC201E
Characteristics: high heat and very high molecular weight GPPS
Application：suitable for embossed sheet, OPS, foam meat trays & other food packaging
items, and insulation board etc
Manufacturer：Supreme Petrochem Limited
GPPS-SC202EL
Characteristics: high strength GPPS with excellent process ability
Application：CD jewel box, caps and closures
Manufacturer：Supreme Petrochem Limited
GPPS-SC208
Characteristics: Very easy flow GPPS
Application：toys, extrusion coating, base resin for colour masterbatches etc.
Manufacturer：Supreme Petrochem Limited
HIPS-SH3001
Characteristics: Medium flow, high strength, excellent aesthetic appearance
Application：thin walled disposables for hot beverages
Manufacturer：Supreme Petrochem Limited
HIPS-SH810HF
Characteristics: High flow grade with excellent molded appearance
Application：TV cabinets, computer accessories, toys etc.
Manufacturer：Supreme Petrochem Limited
HIPS-SH03
Characteristics: Very high flow grade with excellent molded appearance
Application：gas assisted injection moulding for TV cabinets etc.
Manufacturer：Supreme Petrochem Limited
Speciality HIPS-SH400M
Characteristics: High gloss grade
Application ： office accessories, camera, toys, appliances housing, airconditioner grill,
household articles, ball pen barrel, table top of refrigerator etc.
Manufacturer：Supreme Petrochem Limited
Speciality HIPS-SH850
Characteristics: Super high impact polystyrene
Application：luggage cases, cosmetic boxes, caps for pill vials, shoe heels, toys etc.
Manufacturer：Supreme Petrochem Limited
ABS-507
Characteristics: General Purpose Transparent
Application：Housing of phones, toys, fans, computers, accessory of automobiles
Manufacturer：Great Eastern Resins Industrial Co., Ltd.
ABS-508
Characteristics: General Purpose Transparent
Application：Housing of phones, toys, fans, computers, accessory of automobiles
Manufacturer：Great Eastern Resins Industrial Co., Ltd.
ABS-525
Characteristics: General Purpose Injection Grade
Application：Housing of phones, toys, fans, computers
Manufacturer：Great Eastern Resins Industrial Co., Ltd.
PS-861
Characteristics: Injection Grade: Good transparency, good electrical properties, high heat
stability
Application: Electrical appliances, house hardwares, cassette & cosmestic cases, lamp
decoration, toys
Manufacturer: Taita Chemical Company, Limited
BPA-P.C.Grade
Characteristics: Exceptional impact strength, toughness, good dimensional stability and
creep resistance (under load) in the presence of moisture, high heat resistance and high
tensile strength
Application: Computer housings, tape reel covers, light socket, gas meter cover, lenses for
appliances and pipes and application for epoxy grade: such as specialty coating, Cooper Clad
Laminate, adhesives, electrical encapsulating, varnishing materials and structural plastic parts.
Manufacturer: Nan Ya Plastics Corporation
PS (Polystyrene) GP-300
Characteristics: General Purpose
Application：Excellent clarity, easy molding and coloring; suitable for Injection molding. e.g.
toys, lamp-shields, cosmetic containers and house wares, CD cases, etc.
Manufacturer：Eternal Chemical Company
YUNGSOX Block Copolymer Injection Grade PP 3015 / 3040C
Characteristics: Excellent impact resistance; Excellent resistance to low temperature
brittleness; Good stiffness
Application: Automotive parts, bumpers, sports, base of luggage, heavy duty container
Manufacturer: Yung Chia Chemical Industries Corporation
YUNGSOX Block Copolymer Injection Grade PP 3040 / 3080
Characteristics: Good impact resistance; High heat resistance; Good stiffness
Application: Automotive parts, electric appliance parts, toys, bumpers, battery case
motorcycle parts, furniture
Manufacturer: Yung Chia Chemical Industries Corporation
YUNGSOX PPR 5003 / Copolymer Extrusion Grade
Characteristics: Excellent impact resistance; Excellent resistance to heat ageing; Excellent
creep resistance
Application: PP-R pipe for drinking water, waste system, under-floor heating circuits, Flexible
pipe for geyser
Manufacturer: Yung Chia Chemical Industries Corporation
TAISOX HDPE 8012 / Flat Yarn
Characteristics: Low processing temperature, high strength, high gloss
Application: Flat yarn, monofilament, sheet
Manufacturer: Formosa Plastics Corporation
TAISOX HDPE 8070 / Injection Molding Grade
Characteristics: Easy Processing, high rigidity, good impact strength, high warp resistance
Application: Crates, boxes, seats, pallet
Manufacturer: Formosa Plastics Corporation
TAISOX HDPE 8250 / Injection Molding Grade
Characteristics: Good flow, high warp resistance, suitable for fast cycling applications
Application: Housewares, thin walled food containers, PET bottle base cup
Manufacturer: Formosa Plastics Corporation
PBT / 1100 / General Purpose / Engineering Plastics
Characteristics: Low viscosity, I.V. value 0.85 Meet FDA requirement
Applications: Extrusion, spinning, injection molding for thick or small parts
Manufacturer: Nan Ya Plastics Corporation
Nylon 6 / 2110 / General Purpose / Engineering Plastics
Characteristics: Standard type
Applications: For general purpose injection molding applications which require high
mechanical strength. For example, gear, housing, socket for electrical goods, etc.
Manufacturer: Nan Ya Plastics Corporation
Polyacetal (POM) / FM 090 / Engineering Plastics (Thermoplastic)
Feature: Standard-Flow, Minimal Mold
Applications: Buttons and press-in fasteners, plumbing and hardware, gears, electronic parts,
automotive parts, household appliances, bearing, other injection parts.
Manufacturer: Formosa Plastics Corporation
For more test details and properties of the above product items, please visit URMS Plastics at
www.urms.com/Plastics, select each product item on the product page, and click on Yung Chia
Chemical Industries Corporation, Nan Ya Plastics Corporation, Formosa Plastics Corporations
or Formosa Chemicals & Fibre Corporation. You may call at 886-2-27182066, fax to
886-2-27180688, or directly email to service@urms.com.
Petrochemical
1.4-BG
Characteristics: 1,4-BG is a colorless, clear, no corrosiveness liquid, below the melting point,
1,4-BG solidifies to give a white, crystalline mass. Melting point is 20°C, boiling point is
228.1 °C.
Application: PBT engineering plastic PBT elastomer, PU leather, TPU elastomer, PU foam,
Tree (thermoplasticester elastomer), GBL (y-butyrolactone. Solvent)
Manufacturer: Nan Ya Plastics Corporation
PET CHIP
Characteristics: Good transparency
Applications: Bottles
Manufacturer: Tuntex Distinct Corp.; Nan Ya Plastics Corporation
DOP
Characteristics: DOP is produced by esterifying 2-Ethylhexanol and Phthalic Anhydride. It
is highly compatible with PVC and has an excellent plasticizing efficiency and an average
characteristic of various plasticizers. In PVC processing, the consumption of DOP is the
highest among all placticizers.
Uses: Wires & Cables, Leath & Clothes, Gloves, Shoes, Construction materials and PVC
Plastisols…etc.
Manufacturer: Nan Ya Plastics Corporation
Electronics
NPRCC Copper Foil
Characteristics: Excellent filling ability, Lower dielectric constant, Easy to drill by CO2 laser,
UL File number E98983(s)
Manufacturer: Nan Ya Plastics Corporation
NP-150R Epoxy Resin
Characteristics: High luminance of epoxy contrast with copper for laser type A.O.I. UV
solder mask may be applied simultaneously to increase yieslds. High erformance epoxy
blended to achieve higher resistance than that of FR-4-86. Thickness 0.8mm capability
Manufacturer: Nan Ya Plastics corporation
NP-150TL Epoxy Resin
Characteristics: Multi-functional epoxy renders the material outstanding heat resistance,
better dimensional stability, and through-hole reliability that benefit the performance of high
layer count increase yields multilayer boards; HTE copper foil applied to prevent corner
cracking. High luminance of epoxy contrast with copper for A.O.I.; UV solder mask may be
applied simultaneously in order to increase yields
Manufacturer: Nan Ya Plastics corporation
URMS 148pin DDR333
Avaliable Capacity: 128 MB / 256 MB
Manufacturer: United Raw Material Solutions, Inc.
For more detailed product properties of URMS 184pin DDR333, please visit URMS Memory
Module website at http://memory.urms.com, and then select the "DDR" product item on the
first page. Or you may directly email to memory@urms.com for further inquiries.
Weekly Promotion
We are pleased to announce a special promotion for all grades of products.
Prompt shipment! Most favorable price!
Limited amount!
Textile:
Far infrared ray fiber
1.4D----2D x 38mm:
for spinning use, for non-woven use
6D----15D x 64mm:
hollow, for filling use
Breathable fiber
1.4D x 38mm
ES-PET
IV=0.48
High shrinkage chips
Tailor made available,
shrinkage range of 25-60%
FD-PET
Customer request available
within 1.8-2.5% delustering powder content
Please specify your interests and contact us at service@urms.com