8465
846510
846591
846592
846593
846594
846595
846596
846599
machine tools for working wood, cork, bone etc
Machines Which Can Carry Out Different Types, for Working Hard
Material
Sawing Machines for Working Wood, Cork, Bone or Similar Hard
Materials
Planing, Milling or Moulding (By Cutting) Machines
Grinding, Sanding or Polishing Machines for Working Hard Materials
Bending or Assembling Machines for Working Hard Materials
Drilling or Mortising Machines for Working Hard Materials
Splitting, Slicing or Paring Machines
Other Machine-tools for Working Wood, Cork or Similar Hard Materials
American Standards
ASME B107.44M-2002, Glaziers’ Chisels
and Wood Chisels - Safety Requirements
This Standard provides performance and safety
requirements for glaziers' chisels and wood
chisels. It is intended to serve as a guide in
selecting, testing, and using the hand tools
covered. It is not the purpose of this Standard
to specify the details of manufacturing.This
Standard is also meant to serve as a guide in
developing manuals and posters, and for
training personnel to work safely.This Standard
may be used as a guide by state authorities or
other regulatory bodies in the formulation of
laws or regulations. It is also intended for
voluntary use by establishments that use or
manufacture the tools covered. The methods
employed to ensure compliance with this
Standard shall be determined by the proper
regulatory or administrative authority
ASME B107.45M-2002, Ripping Chisels
and Flooring/Electricians’ Chisels –
Safety Requirements
This Standard provides performance and safety
requirements for ripping chisels and
flooring/electrician's chisels. These chisels are
intended for use in cutting wood and light
prying, such as cutting the tongue of installed
flooring sections and raising and removing floor
planks. This Standard is intended to serve as a
guide in selecting, testing, and using the tools
covered. It is not the purpose of this Standard
to specify the details of manufacturing.
ASME B107.54-2001, Heavy Striking Tools
- Safety Requirements
Provides safety requirements for the design,
construction, testing and use for:
Blacksmiths'double -face sledges, hard drilling
hammers,blacksmiths' cross peen sledges,
wood chopper's maul, railroad spike maul,
spalling hammers, stone sledge, bush
hammers, boat mauls, lineman's or farriers'
turning hammers.
Single copy price: $10.00
Order from: Silvana Rodriguez-Bhatti, ASME
Send comments (with copy to BSR) to: James
Bird, M/S 20S2, ASME
ASME B107.55M-2002, Axes – Safety
Requirements
This Standard provides safety requirements for
the design, construction, testing, and use of
axes that are intended specifically for use in
felling, trimming, and pruning trees; splitting
and cutting wood; notching and shaping logs
and timbers; driving wooden or plastic stakes;
pulling unhardened nails when the tool is
provided with a nail slot; or digging when the
particular tool is provided with a digging blade.
ANSI B212.9-1994 (R2005), Cutting Tools Carbide Blanks for Tipping Circular Saws
Covers dimensional specifications and
designation for carbide blanks for tipping
circular saws. The values stated in US
customary units are to be regarded as the
standard.
UL 60745-2-11-2004, Standard for Safety
for Hand-Held Motor-Operated Electric
Tools - Safety - Part 2-11: Particular
Requirements for Reciprocating Saws
This International Standard deals with the
safety of hand-held motor-operated or
magnetically driven electric tools, the rated
voltage of the tools being not more than 250 V
for single-phase a.c. or d.c. tools, and 440 V for
three-phase a.c. tools. This standard applies to
reciprocating saws (jig and sabre saws).
UL 60745-2-20-2005, Standard for Safety
for Hand-held Motor-operated Electric
Tools - Safety - Part 2-20: Particular
Requirements for Band Saws
This bulletin proposes the following changes in
requirements: Proposed First Edition of the
Standard for Hand-Held Motor-Operated
Electric Tools – Safety – Part
2-20: Particular Requirements for Band Saws,
UL/CSA 60745-2-20
ANSI B175.1-2000, Gasoline Powered
Chain Saws, Safety Requirements for
Establishes safety requirements for the
manufacture and use of portable, hand-held,
gasoline-powered chain saws. It contains
definitions of terms relevant to chain saws and
their use, and guidelines for certain chain saw
features. The standard also contains test
procedures and specific performance
requirements concerning vibration, sound
levels and bar nose kickback.
ANSI B11.23-2001, Safety Requirements
for Machining Centers and Automatic
Numerically Controlled Milling, Drilling
and Boring Machines
This standard is part of the ANSI B11 series of
machine tool safety standards and pertains to
the safety requirements for machining centers
and automatic numerically controlled milling,
drilling and boring machines as described in
the document. It is limited to the requirements
of safeguarding of personnel, installation,
verification, operation, maintenance, training,
and documentation for individual machines.
ANSI B11.8 2001, Drilling, Milling, and
Boring Machines, Safety Requirements
for the Construction, Care, and Use of
Comprises part of the ANSI B11 series of
machine tool safety standards and pertains to
the safety requirements for manual milling,
drilling and boring machines as described in
the document. It is limited to the requirements
of safeguarding of personnel, installation,
verification, operation, maintenance, training,
and documentation for individual
machines.This standard is part of the ANSI B11
series of machine tool safety standards and
pertains to the safety requirements for manual
milling, drilling and boring machines as
described in the document. It is limited to the
requirements of safeguarding of personnel,
installation, verification, operation,
maintenance, training, and documentation for
individual machines. This standard was listed
for public review in the 4/20/2001 issue of
Standards Action. It is being resubmitted due
to substantive changes to the text.
ASME B94.19-1997 (R2003), Milling
Cutters and End Mills
Covers high speed steel milling cutters and end
mills of one piece construction as listed in
Tables 1 to 62. It also includes general
definitions, sizes and tolerances
ANSI B212.11-1988 (R2002), Cutting Tools
– Indexable Insert Shank-Type Milling
Cutters (Inch Series) – Designation
Establishes a code of indexable insert
shank-type milling cutters designed in U.S.
customary inch units for the purpose of
simplifying orders and referencing
specifications.
ANSI/ISO/IEC 11529-1-2004, Milling cutters
- Designation - Part 1: Shank type end
mills of solid or tipped design
This part of ISO 11529 establishes a
designation system for shank type end mills of
solid or tipped design with a maximum
diameter of 99.9mm, with the purpose of
simplifying communication between users and
sppliers
ANSI/ISO/IEC 11529-2-2004, Milling cutters
- Designation - Part 2 - Shank type and
bore type milling cutters with the
indexable inserts
This part of ISO 11529 establishes a
designation system for shank type and bore
type milling cutters embodying hardmaterial
indexable inserts, witht the purpose of
simplifying communication between users and
suppliers of such tools.
ASME B107.4M-2005, Driving and Spindle
Ends for Portable Hand, Air, and Electric
Tools
Applies to portable power tools for drilling,
grinding, polishing, sawing, and driving
threaded fasteners and hand tools for driving
threaded fasteners. Other tools not classified
as percussion tools belong in this category and
may be added by revision or addition through
the usual procedure. This Standard includes
dimensions and tolerances for both driving and
driven elements where such coordination is
important and not established by reference to
the pertinent American National Standards. All
dimensions are in inches and millimeters.
UL 745-2-3-2006, Standard For Safety For
Particular Requirements for Grinders,
Polishers and Disk-Type Sanders
First Edition of the Standard for Particular
Requirements for Grinders, Polishers and
Disk-Type Sanders, UL 745-2-3, as an
American National Standard.
ANSI B11.15-2001, Pipe, Tube, and Shape
Bending Machines, Safety Requirements
for Construction, Care, and Use
Pertains to the safety requirements for pipe,
tube, and shape bending machines as
described in this standard. This standard is
part of the ANSI B11 series of safety standards
for machine tools. It is limited to the
requirements of safeguarding of personnel,
installation, verification, operation,
maintenance, training, and documentation for
individual machines.
UL 60745-2-4-2006, Hand-Held
Motor-Operated Electric Tools - Safety Part 2-4: Particular Requirements for
Sanders and Polishers Other Than Disk
Type
UL 745-2-3-2006, Standard For Safety For
Particular Requirements for Grinders,
Polishers and Disk-Type Sanders
First Edition of the Standard for Particular
Requirements for Grinders, Polishers and
Disk-Type Sanders, UL 745-2-3, as an
American National Standard.
ASME B107.43M-1998, Wood Splitting
Wedges - Safety Requirements
Provides safety requirements for the design,
construction, testing, and use of splitting
wedges made of steel that are intended
specifically for use in splitting wood.
ASME B107.55M-2002, Axes – Safety
Requirements
This Standard provides safety requirements for
the design, construction, testing, and use of
axes that are intended specifically for use in
felling, trimming, and pruning trees; splitting
and cutting wood; notching and shaping logs
and timbers; driving wooden or plastic stakes;
pulling unhardened nails when the tool is
provided with a nail slot; or digging when the
particular tool is provided with a digging blade.
ASME B107.55M-2002, Axes – Safety
Requirements
This Standard provides safety requirements for
the design, construction, testing, and use of
axes that are intended specifically for use in
felling, trimming, and pruning trees; splitting
and cutting wood; notching and shaping logs
and timbers; driving wooden or plastic stakes;
pulling unhardened nails when the tool is
provided with a nail slot; or digging when the
particular tool is provided with a digging blade.
ASME B107.57-2005, Bricklayers’
Hammers & Prospecting Picks
This Standard provides performance and safety
requirements for bricklayers' hammers that are
intended specifically for use in setting and
cutting (splitting) bricks, masonry tile, chipping
mortar from bricks, and also for prospecting
picks that are intended specifically for use in
pulling samples from the ground. It is intended
to serve as a guide in selecting, testing, and
using the hand tools covered. It is not the
purpose of this Standard to specify the details
of manufacturing. The Standard is also meant
to serve as a guide in developing manuals and
posters and for training personnel to work
safely. This Standard may be used as a guide
by state authorities or other regulatory bodies
in the formation of laws or regulations. It is also
intended for voluntary use by establishments
that use or manufacture the tools covered. The
methods employed to ensure compliance with
this Standard shall be determined by the proper
ISO Standards
ISO 7958:1987
Woodworking machines - Single blade stroke circular
sawing machines for lengthwise cutting of solid woods
and panels - Nomenclature and acceptance conditions
ISO 7959:1987
Woodworking machines - Double edging precision
circular sawing machines - Nomenclature and
acceptance conditions
ISO 7983:1988
Woodworking machines - Single blade circular sawing
machines with travelling table - Nomenclature and
acceptance conditions
ISO 7947:1985
Woodworking machines - Two-, three- and four-side
moulding machines - Nomenclature and acceptance
conditions
ISO 9558:1989
Woodworking machines - Veneer slicing machines Nomenclature
Indian Standards
IS 3691 :
1990
Woodworking machines - Table bandsawing machinesNomenclature and acceptance conditions
Active
IS 7227 :
1974
Recommended diameters of wheels for woodworking table
bandsawing machines
Active
IS 10591 :
1983
Specification for Segmental Saws for Cold Sawing
Active
Indian Standards
IS 1249 :
1997
Recommendations for selection of grinding wheels
Active
IS 1991 :
Part 1 :
1987
Safety requirements for the use, care and protection of abrasive
grinding wheels:Part 1 Definitions
Active
IS 1991 :
Part 2 :
1987
Safety Requirements for the Use, Care and Protection of Abrasive
Grinding Wheels Part 2 : Handling and Storage
Active
IS 1991 :
Part 3 :
1987
Safety Requirements for the Use, Care and Protection of Abrasive
Grinding Wheels - Part 3 : General Machine Requirements
Active
IS 1991 :
Part 4 :
1988
Safety requirements for the use, care and protection of abrasive
grinding wheels:Part 4 Safety guards
Active
IS 1991 :
Part 5 :
1987
Safety requirements for the use, care and protection of abrasive
grinding wheels:Part 5 Flanges
Active
IS 1991 :
Part 6 :
1987
Safety Requirements for the use, care and protection of abrasive
grinding wheels:Part 6 Inspection and mounting
Active
IS 1991 :
Part 7 :
1987
Safety requirements for the use, care and protection of abrasive
grinding wheels:Part 7 Standard speeds
Active
IS 1991 :
Part 8 :
1987
Safety requirements for the use, care and protection of abrasive
grinding wheels:Part 8 Special speeds
Active
IS 1991 :
Part 9 :
1987
Safety requirements for the use, care and protection of abrasive
grinding wheels:Part 9 General operating rules
Active
IS 1991 :
Part 10 :
1987
Safety requirements for the use, care and protection of abrasive
grinding wheels:Part 10 Mounted wheels
Active
IS 2324 :
Part 1 :
1985
Bonded abrasive grinding wheels:Part 1 Profiles and types
Active
IS 2324 :
Part 2 :
1985
Bonded Abrasive Grinding Wheels - Part 2 : Dimensions
Active
IS 2368 :
1993
Test Charts for External Cylindrical Grinding Machines with a
Movable Table
Active
IS 2743 :
1992
Test chart for surface grinding machines with horizontal grinding
wheel spindle and reciprocating table
Active
IS 2996 :
1986
Mounting dimensions of plain grinding wheels by means of hub
flanges
Active
IS 3264 :
1985
Specification for Diamond or Cubic Boron Nitride Abrasive Grinding
Active
Wheels
IS 3612 :
1994
Crushing and grinding equipment - Classification and methods for
measuring capacity
Active
IS 7157 :
1987
Specification for Portable Pneumatic Grinding Machines
Active
IS 7301 :
1974
Specification for Grinding Mandrels
Active
IS 9291 :
1979
Dimensions of internal grinding wheels
Active
IS 9809 :
1981
Test chart for crankshaft grinding machines
Active
IS 10352 : Test Charts for Internal Cylindrical Grinding Machines with
1992
Horizontal Spindle
Active
IS 10874 :
Specification for Felsite Grinding Media and Liner Stones
1983
Active
IS 11522 : Recommendations for basic quantities in cutting and grinding Part 1 :
Part 1 :
Geometry of the active part of cutting tools, general terms, reference Active
1986
systems, tools & working angles and chip breakers
IS 12295 : Acceptance Conditions for External Cylindrical Centreless Grinding
Active
2000
Machines - Testing of the Accuracy
IS 13552 : Test charts for surface grinding machines with vertical grinding
Active
1992
wheel spindle and reciprocating table
IS 13934 : Test charts for surface grinding machines with two columns for
1994
grinding slideways
Active
IS 15299 : Machine Tools - Mounting of Plain Grinding Wheels by Means of
2002
Hub Flanges
Active
IS 3656 : 1968
Code of recommended practice for mechanical polishing of
Active
metals for electroplating
IS 7739 : Part 2 Code of Practice for Preparation of Metallographic
: 1975
Specimens - Part 2 Electrolytic polishing
Active
IS 10024 :
1981
Withdarwn
Jewellers polishing rouge
Shank for Turning and Planing Tools - Shapes and Dimensions
IS 1983 : 2004 of the Section
Active
IS 2877 : 1986 Test chart for single and double column planing machines
Active
Woodworking machines - Thickness planing machines with
IS 7249 : 1993 rotary cutterblock of one-side dressing - Nomenclature and
acceptance conditions
Active
IS 7267 : 1991
Test chart for woodworking surface planing machines with
cutterblock for one-side dressing
Active
IS 7289 : 1992
Test chart for woodworking planing machines for two, three or
four-side dressing
Active
IS 7296 : 1992
Test Chart for Woodworking Surface Planing and Thickness
Machines
Active
IS 8842 : 1978
Specification for High Speed Steel Butt-welded Single Point
Planing Tools
Active
IS 13744 :
Parts 1 to 8 :
1995
Carbide Tipped Single Point Planing Tools - Specification
Active
IS 7258 : 1990
Woodworking Machines - Single Spindle Moulding Machines Nomenclature and Acceptance Conditions
Active
IS 11443 : Part Tool for Pressing and Moulding - Machined Plates : Part 1 1 : 2003
Machined Plates for Press Tools, Jigs and Fixtures
Active
IS 11443 : Part Tools for Pressing and Moulding - Machined Plates - Part 2 :
Active
2 : 2003
Machined Plates for Moulds
IS 13410 :
1992
Glass reinforced polyester sheet moulding compounds (SMC)
Document
Number
Standard Title
Active
Status
IS 2200 : 1994
Test chart for milling machines with table of variable height,
Active
with horizontal spindle
IS 2200 : Part
2 : 2002
Test Conditions for Milling Machines with Table of Variable
Height - Testing of Accuracy - Part 2 : Machines with
Active
Horizontal Spindle
IS 2200 : Part
3 : 2002
Test Conditions for Milling Machines with Table of Variable
Height - Testing of Accuracy - Part 3 : Machines with
Active
Vertical Spindle
IS 2201 : 1994
Test Chart for Milling Machines with Table of Variable
Height, with Vertical Spindle
IS 6681 : 1972
Dimensions for self-release 7/24 tapers for spindle noses for
Active
milling machines
IS 6893 : Part
2 : 1987
Proforma for purchase specification for machine tools:Part 2
Active
Horizontal/universal knee-type milling machines
IS 6893 : Part
12 : 1992
Porforma for purchase specification for machine tools:Part
12 Horizontal boring and milling machines (table type)
Active
IS 7765 : 1975
Sizes for Milling Machines with Table fo Various Height
with Horizontal or Vertical Spindle
Withdarwn
IS 11958 : Part Test chart for boring and milling machines with horizontal
1 : 1987
spindle:Part 1 Table type machines
Active
Active
IS 11958 : Part Test Chart for Boring and Milling Machines with Horizontal
Active
2 : 1992
Spindle - Part 2 : Floor Type Machines
IS 13634 :
1993
General introduction for milling machines with table of
variable height, with horizontal or vertical spindle
IS 13640 :
1993
General introduction for milling machines with table of fixed
Active
height, with horizontal or vertical spindle
Active
IS/ISO 8636-1 Test Chart for Plano-Milling Machines - Part 1 : Portal-Type
Active
: 1987
Machines
Document
Number
IS 2199 : 1989
Standard Title
Radial drilling machines - Test chart
Status
Active
IS 2367 : 1981
Test chart for box type vertical drilling machines
Active
IS 2425 : 1982
Test chart for pillar type vertical drilling machines
Active
IS 2426 : 1985
Test chart for bench drilling machines
Active
IS 6893 : Part 3 : Proforma for purchase specification for machine tools:Part
Active
1988
3 Radial drilling machines
IS 6893 : Part 6 : Proforma for purchase specification for machine tools:Part
Active
1985
6 Bench/pillar type drilling machines
IS 7936 : 1976
Sizes for Redial Drilling Machines
Withdarwn