Section XV
BASIC METALS AND PRODUCTS OF BASIC METAL
Group 78
Lead and products of lead
Note:
1. The terms used in this group have the following meaning:
а) Bars - rolled, pressed, drawn or forged products, not wound into coils and with stable cross section all
along the whole length in the form of circles, ellipses, rectangles (including squares), equiangular triangles or
well-formed convex polygon (including "flattened circles" and "altered rectangles", in which two opposite sides
are convex bows, while the other two are straight, equal in length and parallel to each other). The products with
rectangular (including square), triangular or multangular cross section may have angles, rounded all along the
length of the product. The thickness of such products, with rectangular (including "altered rectangular") cross
section, exceeds 0,1 of their width. Such term is also applied to cast or sintered products of the same forms and
sizes, treated after production (in addition to cutting of edges and removal of scale), provided that during such
treatment they have not acquired the features specific to the products of other commodity items.
b) Shapes - rolled, extruded, drawn, forged or formed products, wound or not wound into coils and with
continuous cross section and falling under the definition of bars, wire, plates, sheets, bands or tape, foil, piping
or tubing. This term is also referred to cast or sintered products of the same form, treated after production (apart
from cutting of edges and removal of scale), provided that during such treatment they have not acquired the
features specific to the products of other commodity items.
c) Wire - rolled, extruded or drawn products in coils and with continuous all along the length cross section
in the form of circles, ellipses, rectangles (including squares), equiangular triangles or well-formed convex
polygons ((including "flattened circles" and "altered rectangles", in which two opposite sides are convex bows,
while the other two are straight, equal in length and parallel to each other).
The products with rectangular (including square), triangular or multangular cross section may have angles,
rounded all along the length of the product. The thickness of such products, with rectangular (including "altered
rectangular") cross section, exceeds 0,1 of their width.
d) Plates, sheets, bands or tape and foil – flat products (except for not treated products, included in
commodity item 7801), wound or not wound in coils and with continuous rectangular (except for square) cross
section, with rounded or not rounded angles (including "altered rectangles", in which two opposite sides are
convex bows, while the other two are straight, equal in length and parallel to each other), with constant
thickness, with:
- rectangular (including square) form with thickness, not exceeding 0,1 of width;
- form, different from rectangular or square, of any size provided, that they have not acquired specific
features for the products included in other commodity items.
Commodity items 7804 include, inter alia, plates, sheets, bands or tape and foil, with uneven surface (e.g.,
furrows, bulges, squares, ellipses), as well as products, perforated, corrugated, polished or with coating,
provided, that they have not acquired specific features for the products included in other commodity items.
e) Pipes and tubes – hollow products, wound or not wound in coils and with constant cross section only
with one closed cavity along the whole length of product in the form of circles, ellipses, rectangles (including
squares), equiangular triangles or well-formed polygons and with constant thickness of wall. The products with
the cross section in the form of rectangle (including square), equiangular triangle or well-formed polygon with
rounded angles all along the length are top be referred to pipes and tubes, provided that their inner and outer
cross sections are concentric and have the same form and orientation. Pipes and tubes, which have the above
described cross sections, may be polished, may have coating, be bended, threaded, drilled, necked down,
expanded, tapered or have flanges, cup type seal or rings on their edges.
Note to sub-items:
1. The terms used in this group have the following meaning.
1. In this group the term "refined lead" means the metal, containing not less than 99,9 weight fr.% of lead,
at that content in weight of any other element does not exceed the limits set in the table below:
Other elements
Chemical element
Limit content,
weight fr.%
Ag
Silver
0,020
As
Arsenic
0,005
Bi
Bismuth
0,050
Ca
Calcium
0,002
Cd
Cadmium
0,002
Cu
Copper
0,080
Fe
Iron
0,002
S
Sulphur
0,002
Sb
Antimony
0,005
Sn
Tin
0,005
Zn
Zinc
0,002
Other (e.g., Te), for
each of them
0,001
Code of nomenclature of goods subject to foreign trade
Commodity Item
Extra unit
of measu
rement
Import customs tariff (in percentage of customs value or in euro)
│7801
│Not-treated lead:
│
│
│7801 10 000 0│- refined lead
│ - │
5
│(in legal wording of the Regulation of the RF Government dated 30.05.02 N366)
│
│
│
│
│- other:
│
│
│
│7801 91 000 0│- - containing antimony as an element
│ - │
5
│
│
│ prevailing in weight
│
│
│
│
│ among other elements
│
│
│
│7801 99
│- - other:
│
│
│
│7801 99 100 0│- - - for refining, containing
│ - │
5
│
│
│0,02 weight fr.% or more of silver
│
│
│
│
│
(black lead, or lead bullion)
│
│
│
│
│- - - other:
│
│
│
│7801 99 910 0│- - - - lead alloys
│ - │
5
│
│7801 99 990 0│- - - - other
│ - │
5
│
│7802 00 000 0│Waste and scrap of lead
│ - │
5
│
│7803 00 000 0│Bars, shapes and wire of lead
│ - │
5
│
│7804
│Plates, sheets, bands or tape and foil
│
│
│
│
│of lead; powder and scale of lead:
│
│
│
│
│- plates, sheets, bands or tape and foil:│
│
│
│7804 11 000 0│- - sheets, bands or tape and foil with │ - │
5
│
│
│ thickness (without base) not more than │
│
│
│
│ 0,2 mm thick
│
│
│
│7804 19 000 0│- - other
│ - │
5
│
│7804 20 000 0│- powder and scale
│ - │
5
│
│7805 00 000 0│Pipes, tubes abd fittings for them
│ - │
5
│
│
│(e.g., couplings, elbows, flanges) of
│
│
│
│
│ lead
│
│
│
│7806 00
│Other products of lead:
│
│
│
│7806 00 100 0│- antiradiation lead coated containers
│ - │
5
│
│
│ for transportation or storing
│
│
│
│
│ radioactive materials
│
│
│
│7806 00 900 0│- other
│ - │
5
│
└─────────────┴─────────────────────────────────────────┴────┴───────────────────┘