Cisco Syllabus - WestNet Learning

advertisement

Cisco Syllabus for blended Course

Self Study/Instructor Lead Training

SELF STUDY

Unit 1 – Internetworking Review

Lesson 1 – Network Reference Models (OSI model review, Data Encapsulation/decapsulation,

The Cisco Three-Layer Model)

Lesson 2 – LAN and WAN Cabling Specifications (Ethernet media connections 10Base and

100Base media types, Cabling Devices RJ-45, straight-through, cross over and roll-over cables, serial transmissions, WAN connector types, DCE/DTEs)

Lesson 3 – Ethernet Review (Ethernet technology and frame types)

Lesson 4 – Networking Devices and Cisco Products (Router, Switch and Hub device review,

Collision and Broadcast Domains, Selecting Cisco Devices, Routers, Switches, Hubs)

Activities and Extended Activities

Unit 1, Lesson 1, 2, 3, 4 - Activities and Lesson 1 Extended Activities (Review answers on-line)

Extra Credit and/or Research project: do Lessons 3 and/or 4 Extended Activities

Unit 1 Quiz (Review answers on-line)

LAB: Lesson 2 - Extended Activity: making a straight through, or cross-over cable if materials are available. (Note: Detailed directions for the cable making lab available on Westnet’s website.)

INSTRUCTOR LEAD TRAINING – DAY 1

Review units 1 and 2, answer questions, review unit quizes

Unit 2 – Switch Technology

Lesson 1 – Switch fundamentals (Bridges vs. Switches , Learning, forwarding, filtering, LAN switch types - Store & forward, Cut through, fragment free)

Lesson 2 – Spanning Tree Protocol (Network redundancy, Loop avoidance with spanning tree protocol, STP port states, root bridge, designated bridge, etc.)

Lesson 3 – Cisco IOS Basics (Using the Command Line Interface (CLI), Getting help, using show commands, Accessing different privileged modes)

Lesson 4 – Catalyst 1900 Switch Configuration Commands (Configuring the switch device for

Hostname, IP address, etc., Hands on lab activities using the CCNA e-trainer program)

Activities and Extended Activities

Unit 2, Lessons 1, 2, and 4 - Activities and Extended Activities

LAB: Unit 2, Lesson 3 - Activities and Extended Activities, Unit 2, Lesson 4 - Extended Activities

SELF STUDY

Unit 3 – Virtual LANS (VLANs)

Lesson 1 – Defining VLAN Components (Describe VLAN technology, Static vs. Dynamic

VLANs membership, Frame Tagging and Inter-Switch Link Protocol, Trunking, and VLAN

Trunking Protocol, VTP modes of operation, Routing between VLANs)

Lesson 2 – Configuring VLANs

Lesson 3 – Reviewing VLAN configuration

Activities and Extended Activities

Unit 2, Lesson 1 - Activities and Extended Activities (questions 1-5), Question 6 Extra Credit

Unit 2, Lesson 2 and Lesson 3 - Activities

Unit 2 and Unit 3 Quiz, (review answers online)

LABs: Perform Lesson 2 and Lesson 3 - Extended Activities if one or two Catalyst 1900 Switches are available in lab environment. VLAN labs are not available in the Sybex E-trainer simulation CD-ROM.

INSTRUCTOR LEAD TRAINING – DAY 2

Review Unit 3, answer questions

Unit 4 – Router IOS

Lesson 1 – Router Components, the Boot Sequence, and Basic Setup (Managing a Cisco

Internetwork, Router boot, and Configuration registry numbers)

Lesson 2 – Router Commands and Configuration (Config and IOS Management Commands,

Using the Router IOS, setting up a Cisco Router, Accessing the CLI and Privileged modes,

Configuration modes and Interfaces and subinterfaces configuration, Setting passwords, banners, hostnames)

Lesson 3 – Configuration and IOS Administration (View router config, backup IOS with TFTP)

Lesson 4 – Documenting a Network with CDP (Use Cisco Discovery Protocol to locate neighbors)

LAB: Perform Unit 4, Lesson 1 - Extended Activities if a router is available in the classroom.

Unit 4, Lesson 2, 3 and 4 - Activities and Extended Activities (CD-ROM)

SELF STUDY

Unit 5 – IP Protocol Suite

Lesson 1 - TCP/IP Review (TCP/IP and the DoD models, Port number assignments, UDP, TCP and IP header information, ICMP, ARP and RARP operations)

Lesson 2 - IP Addressing (Binary/Decimal Conversions, Address classes)

Unit 5, Lesson 1 – Activities, Lesson 2 – Activities and Extended Activities

INSTRUCTOR LEAD TRAINING – DAY 3

Review Unit 5 lessons 1 and 2

Unit 5 – IP Protocol Suite

Lesson 3 – Subnetting (why subnet, defining networks and hosts, subnetting process)

Lesson 4 – Configuring IP (IP address, subnet mask and default gateway settings)

Activities and Extended Activities

Unit 5, Lesson 3 – Written Activities and Extended Activities

Review Unit 5 quiz

LAB: Unit 5, Lesson 4 – Activities and Extended Activities (e-trainer CD-ROM)

Note: This lab must be complete before doing any other lab exercises.

SELF STUDY

Unit 6 – IP Routing

Lesson 1 – Routing Overview (The routing process, default and static routing, using routing protocols - distance vector, link-state, hybrid)

Lesson 2 – RIP (RIP overview, configuring and verifying RIP)

Lesson 3 – IGRP (IGRP overview, configuring and verifying IGRP)

Lesson 4 – Internetwork Connectivity (Build a host table, Telneting to another device, using trace and ping commands)

Unit 6, Lesson 1 – Activities and Extended Activities, Unit 6 quiz (review answers on-line)

LAB: Lesson 2, 3and 4 – Activities and Extended Activities (e-trainer CD-ROM)

SELF STUDY (optional)

The CCNA exam no longer includes the IPX protocol, however it does include questions associated with

MAC addresses which are mentioned in Lesson 1.

Unit 7 – The IPX Protocol

Lesson 1 – IPX Overview (RIP and SAP, IPX addressing, encapsulation methods)

Unit 7, Lesson 1 – Activities and Extended Activities

Lesson 2 – Configuring IPX on a Router (addressing, routing, encapsulation types, load balancing)

Lesson 3 – Verifying IPX Configuration (Showing and verify IPX config, routing tables)

Unit 7, Lesson 2 – Activities, Unit 7 quiz

LAB: Unit 7, Lesson 2 – Extended Activities, Lesson 3 – Activities and Extended Activities (CD-ROM)

INSTRUCTOR LEAD TRAINING – DAY 4

Review Units 6 and 7, answer questions

Unit 8 – Access Lists

Lesson 1 - Access List Overview (standard vs. extended, inbound vs. outbound, syntax, guidelines)

Lesson 2 - IP Access Lists (Standard & Extended IP access lists, controlling telnet access)

Unit 9, Lesson 1 – WAN overview (if time)

Unit 8, Lesson 1 – Activities, Unit 8 quiz

LAB: Unit 8, Lesson 2 - Activities and Extended Activities

SELF STUDY

Unit 8 – Access Lists

Lesson 3 - IPX Access Lists (Standard & Extended IPX access lists)

LAB: Unit 8, Lesson 3 – Activities, and unit 8 quiz

Unit 9 - Wide Area Networking Protocols

Lesson 1 - WAN Overview (WAN connection types, HDLC review)

Unit 9, Lesson 1 – Activities and Extended Activities

INSTRUCTOR LEAD TRAINING – DAY 5

Unit 9 - Wide Area Networking Protocols

Review unit 8, lesson 3 and unit 9 lesson 1, answer questions

Lesson 2 – PPP (PPP review with authentication methods)

Lesson 3 – ISDN (Dial on Demand Routing DDR)

Lesson 4 – Frame Relay Connections (Frame Relay terminology, encapsulation, DLCIs and LMI,

Creating subinterfaces on the router, mapping Frame Relay interfaces)

Activities and Extended Activities

Lesson 2 – Activities and Extended Activities (questions 1-5)

Lesson 3 – Activities and Extended Activities (questions 1and 2)

Lesson 4 – Activities

Unit 9 quiz

LAB: Unit 9, Lesson 4 – Extended Activities (CD-ROM)

SELF STUDY

Review homework answers

Practice with Lab activities off Sybex e-trainer CD-ROM

Course quiz (review answers online)

Download