Type Job. Ref. 6BLRDFS 6” LED Recessed Dead Front Shower 1500 Delivered Lumens (Prismatic Glass) PRODUCT SPECIFICATION DATA MECHANICAL Precision formed 16 ga. galvanized steel ceiling pan with built-in plaster ring Adjustable to 1 ½” ceiling thickness Bar hangars accommodate 27” span Sustainable - electrical components accessible though aperture Non-conductive white Lexan trim ring covers all metal components 0-10v Dimming Standard LED Driver Heat Sink ELECTRICAL Fully serviceable and upgradable LED light engine. Power supply is overload and short circuit protected Standard with 0-10V dimming (10-100%) LED Assembly Junction Box OPTICAL Several lens choices for varying applications For plastic lens options consult factory 7 ¼” PERFORMANCE CCT: 3000K; 3500K; 4000K @ 80+ CRI 70% lumen maintenance at 50,000 hours based on IESNA LM-80-2008. 6 ¾” 7 ¾” LISTINGS ETL tested and listed to ANSI/UL1598 and CAN/CSA C22.2 No. 250.0-08 Suitable for wet location 15 ¼” 5 Year limited warranty. 11 3/8” Dimensions and specifications in ths literature are subject to change. DELIVERED LUMENS -PG @ 35K COLOR TEMPERATURE -15 1453 lumens (Prismatic Glass) -30K 3000 K -35K 3500 K -40K 4000 K LENS OPTIONS VOLTAGE 6BLRDFS 6” LED Round Recessed Dead Front Shower -PG -FA -DO -FF Prismatic Tempered Glass Flat Abalite (1034 Delivered Lumens) Drop Opa (1000 Delivered Lumens)l Flat Fresnel (1346 Delivered Lumens) (narrow beam) -F -EML2 Fusing Emergency w/ rem. test switch -120 -277 Voltage MUST be Specified For 347V consult factory for availability. © 2016 Peachtree Lighting LLC 770-787-8490 • www.peachtreelighting.com 6BLRDFS 6BLRDFS 6” LED Recessed Dead Front Shower CANDLEPOWER DISTRIBUTION CURVE 6BLRDFS-15-35-PA Test No: 3149 Source: Chip on Board Color Temp: 3500K Total Fixture Lumens: 1453 S/MH: 1.2 CONE OF LIGHT 75° 60° Distance to Illuminated Plane Initial Nadir Footcandles Beam Diameter 6' 29 8.4 8' 17 11.2 10' 11 14.0 12’ 7 16.7 45° Input Current Voltage: Watts: Amps: 120 39 0.324 277 39 0.140 1055 0° 15° 30° CANDLEPOWER DISTRIBUTION CURVE 6BLRDFS-15-35-FA Test No: ITL79557 Source: Chip on Board Color Temp: 3500K Total Fixture Lumens: 1034 S/MH: 1.1 CONE OF LIGHT 75° 60° Distance to Illuminated Plane Initial Nadir Footcandles Beam Diameter 6' 12 6.6 8' 7 8.9 10' 4 11.1 12’ 3 13.3 45° Input Current Voltage: Watts: Amps: 120 39 0.324 277 39 0.140 1012 0° 15° 30° CANDLEPOWER DISTRIBUTION CURVE 6BLRDFS-15-35-FF Test No: ITL79558 Source: Chip on Board Color Temp: 3500K Total Fixture Lumens: 1346 S/MH: .21 CONE OF LIGHT 75° 60° Distance to Illuminated Plane Initial Nadir Footcandles Beam Diameter 6' 214 1.3 8' 121 1.7 10' 77 2.1 12’ 53 2.5 45° Input Current Voltage: Watts: Amps: 120 39 0.324 277 39 0.140 1286 0° 15° 30° All Peachtree LED products are baseline tested at 3500K. When a warmer or cooler color temperature is specified, the light output values will vary. Use the following chart to adjust the values for your application. © 2016 Peachtree Lighting LLC 6BLRDFS 770-787-8490 • www.peachtreelighting.com CCT LUMEN CONVERSION 3000K .98 4000K 1.04