CONCEALABLE
ARMOR
SYSTEM
MALE SIZE AND FIT GUIDE
A Superior Fit Matters
It’s vitally important to ensure body armor is
properly sized. A ballistic armor vest that fits
properly will provide maximum comfort, mobility,
performance and protection. A vest that doesn’t
fit may fail in any or all of these categories, with
potentially life-threatening consequences.
Every custom RISE carrier has been engineered
to accommodate full range of motion while
providing premium safety and performance.
Simply follow the step-by-step sizing process
for a superior fit.
A few pointers before getting started:
1. Use a cloth measuring tape.
2. If possible, have another person do the
measuring to ensure accuracy.
3. Take measurements wearing standard
active-duty undershirt, uniform pants, and
complete duty belt with equipment loaded in
all holsters and holder.
4. Measure to the nearest half inch, rounding
up for girth and rounding down for length.
For example, a 45.5" Total Girth Measurement
rounds up to 46" and a 17.5" Panel Length
Measurement rounds down to 17".
Please measure carefully. Inaccurate measurements
may require size modifications which could incur
additional expense and delay delivery.
Thank you for measuring with care! You will soon be protected by a custom
ballistic armor vest engineered to offer you a superior fit. Once we have
received your sizing form, we will email your estimated delivery date.
If you have questions at any time, please contact us:
sales@angelarmor.com / 970 235 2961
© 2016 ANGEL ARMOR, LLC. ALL RIGHTS RESERVED.
1
FILE-000721_A
co n c e a l a b l e a r m o r syst e m
1
Contact
MALE SIZE AND FIT GUIDE
Select Your Product (check one box)
NOTE: Vest color
options other
than black may
be available.
Please contact
your Angel Armor
representative
with inquiries.
Rise Ultra Premium NIJ Level IIIA
First Name_ _______________________________________________
Rise Ultra Premium NIJ Level II
Last Name ________________________________________________
Rise Premium NIJ Level IIIA
Department Affiliation _______________________________________
Rise Premium NIJ Level II
Title _ ____________________________________________________
Badge Number _ ___________________________________________
2
Phone Number _____________________________________________
Email Address _ ____________________________________________
Contact Preference (check one)
Phone
Email
Customize Your Protection
Elevate your protection with the Truth SNAP™ plate
system. The concealable, two-piece design protects
against NIJ Level IIIA threats and beyond, including
common rounds from the AK-47 and M4-style rifles.
Select Your Product (indicate quantity of each plate)
Shipping Address
Truth 44, 5x8
Truth 47, 5x8
Truth 5.56 Set, 5x8
Street ____________________________________________________
Truth 44, 7x9
Truth 47, 7x9
Truth 5.56 Set, 7x9
City ______________________________________________________
Truth 44, 8x10
Truth 47, 8x10
Truth 5.56 Set, 8x10
State_ ___________________________________ Zip_ _____________
Truth 44, 8x10
Shooter’s Cut
Truth 47, 8x10
Shooter’s Cut
Truth 5.56 Set, 8x10
Shooter’s Cut
Country _ _________________________________________________
Order Information
Purchased From _ __________________________________________
Purchase Date _____________________________________________
truth 47
truth 44
NIJ Level lllA
+
7.62x39mm 123gr FMJ (AK-47)
+
Special Threats
NIJ Level lllA
+
.44 MAG 240gr Lead
SWC Gas Checked
+
Special Threats
Quote Number _____________________________________________
Purchase Order ____________________________________________
truth 5.56
Measurements
Date of Measurement________________________________________
Measured By (person’s name)_________________________________
3
Location of Fitting __________________________________________
Officer Gender MALE
(SET)
NIJ Level lllA
+
5.56x45mm 55gr FMJ
+
Special Threats from Truth 47 and Truth 44
Special Instructions, Changes or Modification Requests
No Retention Tails
Extra Carrier
Do you intend to gain/lose
Notes:
20 lbs or more over the
Officer Height ____FEET ____INCHES
next 6 months?
Officer Weight ________ LBS
Yes
No
4 Submit Your Sizing Form
By submitting this information, I acknowledge that this
information is presented as accurately as possible.
MAIL TO:
EMAIL TO:
Angel Armor
Attn: Sales / Sizing
4557 Denrose Court
Fort Collins, CO 80524
sales@angelarmor.com
Officer
Signature ________________________________________ Date _______________
970 235 2961
sales@angelarmor.com
angelarmor.com
2
FILE-000721_A
co n c e a l a b l e a r m o r syst e m
STANDING
Follow these
guidelines to
complete your
measurements.
MALE SIZE AND FIT GUIDE
Stand straight with arms at 90 degrees:
1 Full Chest Measurement
For best
accuracy,
please have
another person
measure you.
Using a soft measuring tape, measure the fullest part of the chest.
Make sure the officer is standing, relaxed. Measure directly under
the armpits, across the fullest part of the chest with the tape
crossing the officer’s back.
INCHES
2 Total Girth Measurement
Measure the waist at
the widest or fullest
part in between the
chest and duty belt.
Round up to the
nearest half inch.
What to Wear:
Standard
undershirt and
uniform pants
INCHES
Duty belt with
equipment
loaded in
holsters and
holders
0 1 2
(check one box)
0"
1"
2" (recommended)
3 Back Panel Length Measurement
With the officer standing, measure from the back collar to the
top of the duty belt with the soft measuring tape.
Tools Needed:
If the lengths for steps 3 and 4 differ by more than 2”, please retake both
measurements. If they do in fact still differ by more than 2”, please make
a notation in the “Special Instructions” box on page 2, indicating that you
have verified these measurements.
INCHES
Soft measuring
tape
Armless chair
SEATED
Questions?
We can help
you measure
for a superior
fit. Contact us.
Select Side-Panel
Overlap:
Simulate a standard driving position:
Simulate a standard driving position for seated measurements:
4 Central Panel Measurement
With the officer seated, place the end of the measuring tape at
the clavicle notch or where the officer wants the top of the body
armor to sit. Measure straight down to the top of the duty belt.
Round down to the nearest half inch.
INCHES
5 Side Panel Length Measurement
With the officer seated, place the end of the soft measuring
tape at the bottom edge of the officer’s clavicle bone. Measure
straight down to the top of the duty belt. Round down to the
nearest half inch.
INCHES
Input
measurements
from above
1
970 235 2961
2
0"
1"
2"
3
sales@angelarmor.com
4
5
OFFICER
INITIALS
angelarmor.com
3
FILE-000721_A