VIRTUAL SMART NETWORK SOLUTIONS FOR SERVICE PROVIDERS ACCESS GW2020P Series Ruggedised Router Cost-effective, DIN Rail mount router for: Overview The Virtual Access GW2020P Series industrial M2M router is designed for use in outdoor equipment and cabinets at roadsides, substations and remote telemetry locations. Applications include SCADA, Telemetry, security, emergency services and other critical infrastructure. The GW2020P Series can be automatically provisioned over an IP network with a minimum of effort using the Virtual Access Activator auto provisioning server. This enables the unit to be deployed without requiring any configuration by installers. The GW2020P Series is a weather-proofed, ruggedised router suitable for high isolation scenarios such as electrical transformation centres, substations and outdoor cabinets. It is DIN Rail or wall mountable. The GW2020P Series offers two Ethernet ports and supports GPRS, 3G, LTE and optionally 450MHz CDMA. It offers secure WAN connectivity for internet and private networking environments over wireless broadband paths. Environmentally Hardened The GW2020P Series router is designed to meet the IP33 standard for ingress protection and EN standards for harsh environments such as electric power, rail and roads. Ingress protection To protect against rain and dust, the box is completely sealed other than the bottom connectors. External vibration The device is designed to withstand environments such as roadsides where there is a high level of vibration. • Substations • Transport and rail • Remote security monitoring • Digital signage • Electrical power industry • Utility applications The GW2020P Series is tested to random vibration, drop, topple and bump standards to ensure the device will continue to operate under conditions that would not be tolerated by commercial grade communications products. It has an optional conformal coating that protects against condensation. EMC immunity, Safety, ESD and Electrical Isolation Environments such as substations and transport can contain high levels of radiated emissions from switchgear, tracks and other power sources. In addition there are tight safety regulations to prevent injury or equipment damage. These require far higher levels of isolation than commercial grade communications equipment. The device is designed to meet the high EMC, safety, ESD and isolation standards mandated by these applications. The PVC enclosure enables the GW2020P Series to be electrically isolated from ground, providing a high level of immunity from electrical surges and transients. In addition, the RS232 and RS485 serial ports on the GW2024P are fully isolated from the main circuit to a level of 2000V DC continuous. This provides a high level of reliability in harsh electrical environments. Dual SIM The GW2020P Series router incorporates the latest wireless technology. Dual SIM architecture ensures that a backup 3G/LTE network can take over should the primary network fail. The router detects a network problem and fails over to a standby SIM/ APN if necessary, ensuring customers' SLAs are upheld. The GW2020P Series 3G/LTE functions also include support for inbound and outbound SMS, so for instance, if all other WAN services are unavailable, commands can be sent to the router to perform diagnostics or even reset function. Automatic Failover Optional automatic failover from fixed to wireless circuits ensures business connectivity through network or last mile circuit outages, whilst email alerting and auto-failback confirm primary circuit restoration. Two Port 10/100 Managed Ethernet Switch The two port 10/100Mbps managed Ethernet switch enables multiple devices to be connected in remote environments with the ability to segment into individually filtered subnets or DMZs. Tagged VLAN (802.1q) segmentation offers further versatility for diverse network applications. Advanced Security & Routing Features GW2020P Series routers deliver business grade security services including: •IPSec (3DES and AES) •L2TP •Stateful Firewall Extended Temperature The GW2020P Series router supports an extended operating temperature range of -40°C to +70°C. Software Features Management •SMS management support •OSPF RS485 Serial Interface •RIP (v1 and v2) •Half duplex two-wire interface •Virtual Router Redundancy Protocol (VRRP) •RJ45 socket presentation •IPSec/L2TP/GRE •Interface is fully isolated from the main circuitry and the other interfaces to 2000V DC •Local and remote advanced configuration through embedded web server IPSec •HTTP/HTTPS •DMVPN •Command Line Interface via Telnet or SSH •Hardware security engine for high performance encryption and authentication •TFTP client download/upload SIM •2 SIM card sockets with cover Antenna •Manual and automatic key management •Configuration change log •Supports two SMA female antenna sockets •HMAC-MD5-96 and HMAC-SHA-1-96 •SNMP agent •AES (256bit) •Telnet server Quality of Service •QoS support of classification and marking •Full DiffServ support Fault Investigation and Reporting •3DES (168bit) with explicit IV •Supports antenna Rx diversity in 2G/3G modes and MIMO in LTE mode IKE-related VPN Specification Approvals and CE Certificates •Main mode, aggressive mode and quick mode •EN60950 safety approval •Event logging •Authentication using RSA signatures, DSS signatures and pre-shared keys interworking •Packet tracing •Dead Peer Detection •Syslog support SCADA Support Service Features •IEC60870-5-104 to IEC60870-5-101 gateway •Configurable host traffic monitoring applet •IEC60870-5-104 to DNP3 gateway •DHCP server/client •DNP3 TCP/IP to serial conversion •DHCP relay Protocol Converter •DNS proxy •Serial to Ethernet, IEC 101/104, DNP3 to IEC104 •Port forwarding •EN55022 and EN55024 EMC •IEC 61000-4-2 severity level 3 Table 13 IEC 60870-2-1, 6 kV discharge •IEC 61000-4-3 severity level 3, Table 15 of IEC 60870-2-1, 10 V/m •IEC61000-4-4 class 4 fast transients Immunity •IEC61000-4-5 class 4 electrical surges Immunity •IEC61000-4-6 class 3 conducted immunity •Packet filtering and firewalling Hardware Features •IEC 61000-4-8 severity level 3 Table 14 of IEC 60870-2, 30/300 A/m •Performance Monitor LAN Interfaces Routing Features •Two 10/100 base-T Ethernet ports •IEC61000-4-12 class 4 ring wave immunity •IPv4 and IPv6 •Auto detects full- or half-duplex operation •DynDNS •Auto detects a regular or crossover cable for easy connection to a switch or hub Power Input •24V AC or 9-59V DC •NTP Client •Tag-based 802.1Q VLAN or port-based VLAN •VLAN support RS232 Serial Interface •2.2 Seconds of power hold-up is provided when used with 24V AC input. This enables a last gasp message to be reliably sent on power down. •Speeds up to 115,200bps Operating Temperature •RJ45 socket presentation •Operating temperatures vary, see table below. •NAT/NAT Traversal •Packet filtering and firewall •Port forwarding •Interface is fully isolated from the main circuitry and the other interfaces to 2000V DC •Static routes •BGPv4 Physical and Environment •Unit size: W160 x H120 x D75mm GW2020P Series Ruggedised Router Ethernet SIM Sockets 3G 4G/LTE CDMA450 RS232 Isolated RS485 Isolated DIN Mounted GW2022P 2 2 l l l - - GW2024P 2 2 l l l 1 1 Order Code = optional RF Band Options 3G Bands 4G LTE Bands Operating Temp 850/900/1800/1900 900/2100 - -400C to 700C -RFA 850/900/1800/1900 850/900/1900/2100 - -400C to 700C -RFB RF Band 2G Bands A B C 850/900/1800/1900 850/900/1900/2100 B1/B2/B3/B5/B7/B8/B20 -300C to 700C -RFC D - - B3/B7/B20/B31 -200C to 600C -RFD E 900/1800 900/2100 B1/B3/B7/B8/B20/B38/B40 -400C to 800C -RFE - CDMA TX 452.500 ~ 457.475/RX 462.000 ~ 467.475 - -200C to 600C -RFF F Virtual Access (Ireland) Ltd., 15 Trinity Enterprise Centre, Pearse Street, Dublin 2, Ireland. Tel: +353 1 604 1800 Fax: +353 1 670 5380 dsht-GW2020-PSeries