INDUSTRIAL STEAM TURBINES PRODUCT SOLUTIONS
MT Steam Turbine
Mid-Sized Turbine
With more than 100
years of experience in
steam turbine technology,
Alstom offers a highly
efficient steam turbine,
optimised for utility and
independent power
production, renewable,
cogeneration and waste toenergy applications.
A highly efficient and robust concept
With superior efficiency and power production, the MT steam turbine offers
customers a robust design based on highly integrated standard modules. Its
modular concept — with proven technology and additional design features to
simplify the power plant’s foundation — results in reduced plant capital costs.
The MT design utilises Alstom’s experience in steam turbine and combines it
with the latest advances in blade profiles and steam flows to deliver a truly
modern turbine, which is adapted to today’s power plant and industrial plant
operator’s needs. Thanks to the flexibility of the design, the MT is available in
reheat and non-reheat configurations with axial and downward exhaust
options allowing it to be integrated into any plant configuration.
© ALSTOM 2014. All rights reserved.
Technical Specifications
RPWR/PRSHT/MT_PS/EN/4.2014/FRA/2148 ©Copyright Alstom 2014. Information contained in this document is indicative only. No representation or
warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial
circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written
authority, is strictly prohibited. Alstom contributes to the protection of the environment. This leaflet is printed on environmentally friendly paper.
Customer Cost Benefits
Design Features
Reduced Plant Capital Costs
The advanced MT steam turbine combines a highly flexible modular concept,
proven technology and high efficiency.
Modular concept for an optimised
value / cost ratio.
Design features that simplify the
Efficient
Flexible
High efficiency using state of the art
power plant’s foundations.
High operational flexibility for steam and
blade profiles.
power production.
Axial exhaust that enables
Scroll inlet delivering best efficiency for
single-floor plant layout - resulting in
lower civic costs.
base load plants.
Multiple controlled extractions for variable
Up to seven uncontrolled extractions for a
more efficient steam cycle.
Optimised Solutions
Robust
With its full modular design, the MT
Turbine designed with proven technologies.
steam turbine can be customised on the
Reliable design based on highly integrated
nozzle box, turbine pressure and steam
standard modules.
path, optimise for a truly tailored solution
Scope Offering
Alstom offers flexible MT steam turbine solutions
process steam demands.
INDUSTRIAL STEAM TURBINES PRODUCT SOLUTIONS
MT STEAM TURBINE
MT Steam Turbine Benefits
Available in reheat or non-reheat configurations with condensing or
Available with base frame for cost effective transport and installation.
backpressure exhaust and optional HP and LP steam extractions for
Modular design with fully customisable steam path and various
industrial applications.
exhaust directions.
High efficiency reaction type blading, standardised Last Stage Blade
family.
Alstom's Industrial Steam Turbine Applications
INDUSTRIAL STEAM TURBINES PRODUCT SOLUTIONS
MT STEAM TURBINE
Alstom Project References
Crescent Dunes
Location:..............................................
Customer:............................................
Plant type:...........................................
Commissioning: ...................................
Scope of supply:...................................
Technical specifications:.......................
Tonopah (Nevada) USA
Cobra, SolarReserve (end customer)
Solar power plant
2013
MT steam turbine, TOPAIR generator, auxiliaries, control system
125 MW rated power output
North Battleford
Location:..............................................
Customer:............................................
Plant type:...........................................
Commissioning: ...................................
Scope of supply:...................................
Technical specifications:.......................
Saskatchewan, Canada
Kiewit Power Engineers
Combined cycle power plant
2012
MT steam turbine, TOPAIR generator, auxiliaries, control system
91 MW rated power output
Swiecie
Location:..............................................
Customer:............................................
Plant type:...........................................
Commissioning: ...................................
Scope of supply:...................................
Technical specifications:.......................
Swiecie, Poland
Mondi Packaging Paper S.A.
Pulp & Paper
2003
MT steam turbine, TOPAIR generator, auxiliaries, control system
33 MW rated power output
Alstom Steam Turbines Experience
• 140 MT units installed worldwide, resulting in over 22 GW of power
• More than 13 GW of combined heat and power production for various industries
• Total steam turbine installed capacity of almost 580 GW worldwide
• Over 1,000 small steam turbines (< 100 MW) delivered totaling 17 GW
For more information
please contact Alstom:
© ALSTOM 2014. All rights reserved.
Alstom (Switzerland) Ltd
Brown Boveri Strasse 7
CH-5401 Baden
Phone: +41 56 205 2025
Visit us online: www.alstom.com
RPWR/PRSHT/MT_PS/EN/4.2014/FRA/2148 ©Copyright Alstom 2014. Information contained in this document is indicative only. No representation or
warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial
circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written
authority, is strictly prohibited. Alstom contributes to the protection of the environment. This leaflet is printed on environmentally friendly paper.