Data Sheet No. PD60147 Rev.T
IR2110(S)/IR2113(S) & (PbF)
HIGH AND LOW SIDE DRIVER
Features
• Floating channel designed for bootstrap operation
•
•
•
•
•
•
•
•
Fully operational to +500V or +600V
Tolerant to negative transient voltage
dV/dt immune
Gate drive supply range from 10 to 20V
Undervoltage lockout for both channels
3.3V logic compatible
Separate logic supply range from 3.3V to 20V
Logic and power ground ±5V offset
CMOS Schmitt-triggered inputs with pull-down
Cycle by cycle edge-triggered shutdown logic
Matched propagation delay for both channels
Outputs in phase with inputs
Also available LEAD-FREE
Product Summary
VOFFSET (IR2110)
(IR2113)
500V max.
600V max.
IO+/-
2A / 2A
VOUT
10 - 20V
ton/off (typ.)
120 & 94 ns
Delay Matching (IR2110) 10 ns max.
(IR2113) 20ns max.
Packages
Description
The IR2110/IR2113 are high voltage, high speed power MOSFET and
IGBT drivers with independent high and low side referenced output
16-Lead SOIC
14-Lead PDIP
channels. Proprietary HVIC and latch immune CMOS technologies
IR2110S/IR2113S
IR2110/IR2113
enable ruggedized monolithic construction. Logic inputs are compatible with standard CMOS or LSTTL output, down to 3.3V logic. The
output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive
an N-channel power MOSFET or IGBT in the high side configuration which operates up to 500 or 600 volts.
Typical Connection
up to 500V or 600V
HO
VDD
VDD
VB
HIN
HIN
VS
SD
SD
LIN
LIN
VCC
V SS
VSS
COM
VCC
TO
LOAD
LO
(Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical
connections only. Please refer to our Application Notes and DesignTips for proper circuit board layout.
www.irf.com
1
IR2110(S)/IR2113(S) & (PbF)
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured
under board mounted and still air conditions. Additional information is shown in Figures 28 through 35.
Symbol
Definition
Min.
Max.
-0.3
525
Units
VB
High side floating supply voltage (IR2110)
-0.3
625
VS
High side floating supply offset voltage
VB - 25
VB + 0.3
VHO
High side floating output voltage
VS - 0.3
VB + 0.3
VCC
Low side fixed supply voltage
-0.3
25
VLO
Low side output voltage
-0.3
VCC + 0.3
VDD
Logic supply voltage
-0.3
VSS + 25
VSS
Logic supply offset voltage
VCC - 25
VCC + 0.3
VIN
Logic input voltage (HIN, LIN & SD)
VSS - 0.3
VDD + 0.3
(IR2113)
dVs/dt
PD
RTHJA
Allowable offset supply voltage transient (figure 2)
—
50
Package power dissipation @ TA ≤ +25°C
(14 lead DIP)
—
1.6
(16 lead SOIC)
—
1.25
Thermal resistance, junction to ambient
(14 lead DIP)
—
75
(16 lead SOIC)
—
100
TJ
Junction temperature
—
150
TS
Storage temperature
-55
150
TL
Lead temperature (soldering, 10 seconds)
—
300
V
V/ns
W
°C/W
°C
Recommended Operating Conditions
The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the
recommended conditions. The VS and VSS offset ratings are tested with all supplies biased at 15V differential. Typical
ratings at other bias conditions are shown in figures 36 and 37.
Symbol
Definition
VB
High side floating supply absolute voltage
VS
High side floating supply offset voltage
Min.
Max.
VS + 10
VS + 20
(IR2110)
Note 1
500
(IR2113)
Note 1
600
VHO
High side floating output voltage
VS
VB
VCC
Low side fixed supply voltage
10
20
VLO
Low side output voltage
0
VCC
VDD
Logic supply voltage
VSS
Logic supply offset voltage
VIN
TA
VSS + 3
VSS + 20
-5 (Note 2)
5
Logic input voltage (HIN, LIN & SD)
VSS
VDD
Ambient temperature
-40
125
Units
V
°C
Note 1: Logic operational for VS of -4 to +500V. Logic state held for VS of -4V to -VBS. (Please refer to the Design Tip
DT97-3 for more details).
Note 2: When VDD < 5V, the minimum VSS offset is limited to -VDD.
2
www.irf.com
IR2110(S)/IR2113(S) & (PbF)
Dynamic Electrical Characteristics
VBIAS (VCC, VBS, VDD) = 15V, CL = 1000 pF, TA = 25°C and VSS = COM unless otherwise specified. The dynamic
electrical characteristics are measured using the test circuit shown in Figure 3.
Symbol
Definition
Figure Min. Typ. Max. Units Test Conditions
ton
Turn-on propagation delay
7
—
120
150
VS = 0V
toff
Turn-off propagation delay
8
—
94
125
VS = 500V/600V
tsd
Shutdown propagation delay
9
—
110
140
tr
Turn-on rise time
10
—
25
35
tf
Turn-off fall time
11
—
17
25
—
—
—
—
—
—
10
20
MT
Delay matching, HS & LS
turn-on/off
(IR2110)
(IR2113)
ns
VS = 500V/600V
Static Electrical Characteristics
VBIAS (VCC, VBS, VDD) = 15V, TA = 25°C and VSS = COM unless otherwise specified. The VIN, VTH and IIN parameters
are referenced to VSS and are applicable to all three logic input leads: HIN, LIN and SD. The VO and IO parameters are
referenced to COM and are applicable to the respective output leads: HO or LO.
Symbol
Definition
Figure Min. Typ. Max. Units Test Conditions
VIH
Logic “1” input voltage
12
9.5
—
—
VIL
Logic “0” input voltage
13
—
—
6.0
VOH
14
—
—
1.2
VOL
High level output voltage, VBIAS - VO
Low level output voltage, VO
15
—
—
0.1
IO = 0A
ILK
Offset supply leakage current
16
—
—
50
VB=VS = 500V/600V
IQBS
Quiescent VBS supply current
17
—
125
230
VIN = 0V or VDD
IQCC
Quiescent VCC supply current
18
—
180
340
IQDD
Quiescent VDD supply current
19
—
15
30
VIN = 0V or VDD
IIN+
Logic “1” input bias current
20
—
20
40
VIN = VDD
IIN-
21
22
—
7.5
—
8.6
1.0
9.7
VIN = 0V
23
7.0
8.2
9.4
24
7.4
8.5
9.6
25
7.0
8.2
9.4
IO+
Logic “0” input bias current
VBS supply undervoltage positive going
threshold
VBS supply undervoltage negative going
threshold
VCC supply undervoltage positive going
threshold
VCC supply undervoltage negative going
threshold
Output high short circuit pulsed current
26
2.0
2.5
—
IO-
Output low short circuit pulsed current
27
2.0
2.5
—
VBSUV+
VBSUVVCCUV+
VCCUV-
www.irf.com
V
µA
IO = 0A
VIN = 0V or VDD
V
A
VO = 0V, VIN = VDD
PW ≤ 10 µs
VO = 15V, VIN = 0V
PW ≤ 10 µs
3
IR2110(S)/IR2113(S) & (PbF)
Functional Block Diagram
VB
UV
DETECT
VDD
R Q
S
HIN
HV
LEVEL
SHIFT
VDD /VCC
LEVEL
SHIFT
PULSE
FILTER
R
R
Q
HO
S
PULSE
GEN
VS
SD
VCC
LIN
S
VDD /VCC
LEVEL
SHIFT
R Q
UV
DETECT
LO
DELAY
COM
VSS
Lead Definitions
Symbol Description
VDD
HIN
SD
LIN
VSS
VB
HO
VS
VCC
LO
COM
Logic supply
Logic input for high side gate driver output (HO), in phase
Logic input for shutdown
Logic input for low side gate driver output (LO), in phase
Logic ground
High side floating supply
High side gate drive output
High side floating supply return
Low side supply
Low side gate drive output
Low side return
Lead Assignments
4
14 Lead PDIP
16 Lead SOIC (Wide Body)
IR2110/IR2113
IR2110S/IR2113S
www.irf.com
IR2110(S)/IR2113(S) & (PbF)
HV = 10 to 500V/600V
Vcc =15V
10KF6
10
µF
0.1
µF
9
3
10
5
7
11
12
1
13
+
200
µH
0.1
µF
6
10KF6
HO
100µF
dVS
>50 V/ns
dt
OUTPUT 10KF6
MONITOR
2
IRF820
Figure 1. Input/Output Timing Diagram
Figure 2. Floating Supply Voltage Transient Test Circuit
Vcc =15V
10
µF
0.1
µF
9
HIN
SD
LIN
3
0.1
µF
6
10
5
7
11
12
1
CL
HO
LO
VB
+
10
15V
µF
V
S
(0 to 500V/600V)
ton
2
Figure 3. Switching Time Test Circuit
toff
tr
90%
10
µF
CL
13
50%
50%
HIN
LIN
HO
LO
tf
90%
10%
10%
Figure 4. Switching Time Waveform Definition
HIN
LIN
50%
50%
50%
SD
LO
HO
tsd
HO
LO
10%
90%
MT
MT
90%
LO
Figure 5. Shutdown Waveform Definitions
www.irf.com
HO
Figure 6. Delay Matching Waveform Definitions
5
IR2110(S)/IR2113(S) & (PbF)
250
250
200
200
Turn-On Delay Time (ns)
Turn-On Delay Time (ns)
Max.
150
Max.
100
Typ.
50
150
Typ.
100
50
0
0
-50
-25
0
25
50
75
100
125
10
12
14
Figure 7A. Turn-On Time vs. Temperature
250
20
250
Max.
200
Turn-Off Delay Time (ns)
Turn-On Delay Time (ns)
18
Figure 7B. Turn-On Time vs. VCC/VBS Supply Voltage
200
Typ.
150
100
50
150
Max.
100
Typ.
50
0
0
0
2
4
6
8
10 12 14 16 18 20
-50
-25
0
25
50
75
100
125
Temperature (°C)
VDD Supply Voltage (V)
Figure 8A. Turn-Off Time vs. Temperature
Figure 7C. Turn-On Time vs. VDD Supply Voltage
250
250
200
200
Turn-Off Delay Time (ns)
Turn-Off Delay Time (ns)
16
VCC/VBS Supply Voltage (V)
Temperature (°C)
Max.
150
Typ.
100
50
Max.
150
100
Typ
50
0
0
10
12
14
16
18
20
VCC/VBS Supply Voltage (V)
Figure 8B. Turn-Off Time vs. VCC/VBS Supply Voltage
6
0
2
4
6
8
10 12 14 16 18 20
VDD Supply Voltage (V)
Figure 8C. Turn-Off Time vs. VDD Supply Voltage
www.irf.com
250
250
200
200
Max.
Shutdown Delay time (ns)
Shutdown Delay Time (ns)
IR2110(S)/IR2113(S) & (PbF)
150
Max.
100
Typ.
150
Typ.
100
50
50
0
0
-50
-25
0
25
50
75
100
125
10
12
16
18
20
Figure 9B. Shutdown Time vs. VCC/VBS Supply Voltage
Figure 9A. Shutdown Time vs. Temperature
250
100
200
80
Max .
Turn-On Rise Time (ns)
Shutdown Delay Time (ns)
14
VCC/VBS Supply Voltage (V)
Temperature (°C)
150
100
Typ
60
40
Max.
50
Typ.
20
0
0
2
4
6
8 10 12 14 16
VDD Supply Voltage (V)
18
0
20
-50
0
25
50
75
100
125
Temperature (°C)
Figure 10A. Turn-On Rise Time vs. Temperature
Figure 9C. Shutdown Time vs. V DD Supply Voltage
100
50
80
40
Turn-Off Fall Time (ns)
Turn-On Rise Time (ns)
-25
60
Max.
40
Typ.
20
30
Max.
20
Typ.
10
0
0
10
12
14
16
18
VBIAS Supply Voltage (V)
Figure 10B. Turn-On Rise Time vs. Voltage
www.irf.com
20
-50
-25
0
25
50
75
100
125
Temperature (°C)
Figure 11A. Turn-Off Fall Time vs. Temperature
7
IR2110(S)/IR2113(S) & (PbF)
50
15.0
12.0
Logic "1" Input Threshold (V)
Turn-Off Fall Time (ns)
40
30
20
Max.
Typ.
10
Max
Min.
9.0
6.0
3.0
0
10
12
14
16
18
0.0
20
-50
-25
0
25
VBIAS Supply Voltage (V)
Figure 11B. Turn-Off Fall Time vs. Voltage
100
125
15.0
12
12.0
Logic "0" Input Threshold (V)
Logic " 1" Input Threshold (V)
75
Figure 12A. Logic “1” Input Threshold vs. Temperature
15
Max.
9
6
3
9.0
6.0
Max.
Min.
3.0
0
0
2
4
6
8
10 12
14
16
18
0.0
20
-50
-25
0
VDD Logic Supply Voltage (V)
25
50
75
100
125
Temperature (°C)
Figure 12B. Logic “1” Input Threshold vs. Voltage
Figure 13A. Logic “0” Input Threshold vs. Temperature
15
5.00
12
4.00
High Level Output Voltage (V)
Logic "0" Input Threshold (V)
50
Temperature (°C)
9
Min.
6
3
3.00
2.00
Max.
1.00
0
0
2
4
6
8
10 12
14
16
18
20
VDD Logic Supply Voltage (V)
Figure 13B. Logic “0” Input Threshold vs. Voltage
8
0.00
-50
-25
0
25
50
75
100
125
Temperature (°C)
Figure 14A. High Level Output vs. Temperature
www.irf.com
5.00
1.00
4.00
0.80
Low Level Output Voltage (V)
High Level Output Voltage (V)
IR2110(S)/IR2113(S) & (PbF)
3.00
2.00
Max.
1.00
0.60
0.40
0.20
Max.
0.00
0.00
10
12
14
16
18
20
-50
-25
0
VBIAS Supply Voltage (V)
Figure 14B. High Level Output vs. Voltage
50
75
100
125
Figure 15A. Low Level Output vs. Temperature
1.00
500
0.80
400
Offset Supply Leakage Current (µA)
Low Level Output Voltage (V)
25
Temperature (°C)
0.60
0.40
0.20
300
200
100
Max.
Max.
0.00
0
10
12
14
16
18
20
-50
-25
0
VBIAS Supply Voltage (V)
50
75
100
125
Figure 16A. Offset Supply Current vs. Temperature
Figure 15B. Low Level Output vs. Voltage
500
500
400
400
VBS Supply Current (µA)
Offset Supply Leakage Current (µA)
25
Temperature (°C)
300
200
300
Max.
200
Typ.
100
Max.
100
0
0
0
100
200
300
400
V B Boost Voltage (V)
500
IR2110
600
IR2113
Figure 16B. Offset Supply Current vs. Voltage
www.irf.com
-50
-25
0
25
50
75
100
125
Temperature (°C)
Figure 17A. VBS Supply Current vs. Temperature
9
500
625
400
500
VCC Supply Current (µA)
VBS Supply Current (µA)
IR2110(S)/IR2113(S) & (PbF)
300
200
Max.
375
Max.
250
Typ.
100
125
Typ.
0
0
10
12
14
16
18
-50
20
-25
0
625
100
500
80
VDD Supply Current (µA)
VCC Supply Current (µA)
50
75
100
125
Figure 18A. VCC Supply Current vs. Temperature
Figure 17B. VBS Supply Current vs. Voltage
375
250
Max.
125
25
Temperature (°C)
VBS Floating Supply Voltage (V)
60
40
Max.
20
Typ.
Typ.
0
0
10
12
14
16
18
20
-50
-25
0
VCC Fixed Supply Voltage (V)
Figure 18B. VCC Supply Current vs. Voltage
50
75
100
125
Figure 19A. VDD Supply Current vs. Temperature
60
100
Logic "1" Input Bias Current (µA)
50
VDD Supply Current (µA)
25
Temperature (°C)
40
30
20
10
80
60
40
Max.
20
Typ.
0
0
2
4
6
8
10 12 14 16 18 20
VDD Logic Supply Voltage (V)
Figure 19B. VDD Supply Current vs. VDD Voltage
10
0
-50
-25
0
25
50
75
100
125
Temperature (°C)
Figure 20A. Logic “1” Input Current vs. Temperature
www.irf.com
IR2110(S)/IR2113(S) & (PbF)
Logic “1” Input Bias Current (µA)
60
5.00
50
4.00
Logic "0" Input Bias Current (µA)
40
30
20
10
3.00
2.00
Max.
1.00
0
0
2
4
6
8
10 12
14
16
18
0.00
20
-50
-25
0
VDD Logic Supply Voltage (V)
Figure 20B. Logic “1” Input Current vs. VDD Voltage
50
75
100
125
Figure 21A. Logic “0” Input Current vs. Temperature
5
11.0
4
10.0
VBS Undervoltage Lockout + (V)
Logic “0” Input Bias Current (µA)
25
Temperature (°C)
3
2
1
Max.
9.0
Typ.
8.0
Min.
7.0
0
0
2
4
6
8
10 12
14 16
6.0
18 20
-50
VDD Logic Supply Voltage (V)
25
50
75
100
125
Figure 22. VBS Undervoltage (+) vs. Temperature
11.0
11.0
VCC Undervoltage Lockout + (V)
10.0
VBS Undervoltage Lockout - (V)
0
Temperature (°C)
Figure 21B. Logic “0” Input Current vs. VDD Voltage
Max.
9.0
Typ.
8.0
7.0
-25
10.0
Max.
9.0
Typ.
8.0
Min.
7.0
Min.
6.0
6.0
-50
-25
0
25
50
75
100
Temperature (°C)
Figure 23. VBS Undervoltage (-) vs. Temperature
www.irf.com
125
-50
-25
0
25
50
75
100
125
Temperature (°C)
Figure 24. VCC Undervoltage (+) vs. Temperature
11
IR2110(S)/IR2113(S) & (PbF)
11.0
5.00
4.00
Output Source Current (A)
VCC Undervoltage Lockout - (V)
10.0
Max.
9.0
Typ.
8.0
7.0
Typ.
Min.
2.00
1.00
Min.
0.00
-50
6.0
-50
3.00
-25
0
25
50
75
100
125
-25
0
5.00
4.00
4.00
Output Sink Current (A)
Output Source Current (A)
5.00
3.00
2.00
Typ.
0.00
3.00
100
125
Typ.
Min.
2.00
12
14
16
18
0.00
-50
20
-25
0
VBIAS Supply Voltage (V)
25
50
75
100
125
Temperature (°C)
Figure 26B. Output Source Current vs. Voltage
Figure 27A. Output Sink Current vs. Temperature
5.00
150
4.00
125
Junction Temperature (°C)
Output Sink Current (A)
75
1.00
Min.
10
50
Figure 26A. Output Source Current vs. Temperature
Figure 25. VCC Undervoltage (-) vs. Temperature
1.00
25
Temperature (°C)
Temperature (°C)
3.00
2.00
Typ.
1.00
Min.
12
14
16
18
VBIAS Supply Voltage (V)
Figure 27B. Output Sink Current vs. Voltage
12
140V
100
75
10V
50
25
0.00
10
320V
20
0
1E+2
1E+3
1E+4
1E+5
1E+6
Frequency (Hz)
Figure 28. IR2110/IR2113 TJ vs. Frequency
Ω , VCC = 15V
(IRFBC20) RGATE = 33Ω
www.irf.com
IR2110(S)/IR2113(S) & (PbF)
320V
150
320V
150
125
140V
125
100
75
10V
50
Junction Temperature (°C)
Junction Temperature (°C)
140V
100
10V
75
50
25
25
0
1E+2
1E+3
1E+4
1E+5
0
1E+2
1E+6
1E+3
Frequency (Hz)
Figure 29. IR2110/IT2113 TJ vs. Frequency
Ω , VCC = 15V
(IRFBC30) RGATE = 22Ω
140V
1E+6
320V
150
125
140V
125
10V
100
75
50
Junction Temperature (°C)
Junction Temperature (°C)
1E+5
Figure 30. IR2110/IR2113 TJ vs. Frequency
Ω , VCC = 15V
(IRFBC40) RGATE = 15Ω
320V
150
100
25
10V
75
50
25
0
1E+2
1E+3
1E+4
1E+5
0
1E+2
1E+6
1E+3
Frequency (Hz)
320V
150
140V
1E+6
320V 140V
150
10V
75
50
25
Junction Temperature (°C)
125
100
10V
100
75
50
25
1E+3
1E+4
1E+5
Frequency (Hz)
Figure 33. IR2110S/IR2113S TJ vs. Frequency
Ω , VCC = 15V
(IRFBC30) RGATE = 22Ω
www.irf.com
1E+5
Figure 32. IR2110S/IR2113S TJ vs. Frequency
Ω , VCC = 15V
(IRFBC20) RGATE = 33Ω
125
0
1E+2
1E+4
Frequency (Hz)
Figure 31. IR2110/IR2113 TJ vs. Frequency
Ω , VCC = 15V
(IRFPE50) RGATE = 10Ω
Junction Temperature (°C)
1E+4
Frequency (Hz)
1E+6
0
1E+2
1E+3
1E+4
1E+5
1E+6
Frequency (Hz)
Figure 34. IR2110S/IR2113S TJ vs. Frequency
Ω, VCC = 15V
(IRFBC40) RGATE = 15Ω
13
IR2110(S)/IR2113(S) & (PbF)
320V 140V 10V
150
0.0
-2.0
VS Offset Supply Voltage (V)
Junction Temperature (°C)
125
100
75
50
Typ.
-4.0
-6.0
-8.0
25
-10.0
0
1E+2
1E+3
1E+4
1E+5
1E+6
10
12
14
16
18
20
VBS Floating Supply Voltage (V)
Frequency (Hz)
Figure 35. IR2110S/IR2113S TJ vs. Frequency (IRFPE50)
Ω , VCC = 15V
RGATE = 10Ω
Figure 36. Maximum VS Negative Offset vs.
VBS Supply Voltage
VSS Logic Supply Offset Voltage (V)
20.0
16.0
12.0
8.0
Typ.
4.0
0.0
10
12
14
16
18
20
VCC Fixed Supply Voltage (V)
Figure 37. Maximum VSS Positive Offset vs.
VCC Supply Voltage
14
www.irf.com
IR2110(S)/IR2113(S) & (PbF)
Case Outlines
www.irf.com
14-Lead PDIP
01-6010
01-3002 03 (MS-001AC)
16-Lead SOIC (wide body)
01 6015
01-3014 03 (MS-013AA)
15
IR2110(S)/IR2113(S) & (PbF)
LEADFREE PART MARKING INFORMATION
Part number
Date code
IRxxxxxx
YWW?
Pin 1
Identifier
?
P
MARKING CODE
Lead Free Released
Non-Lead Free
Released
IR logo
?XXXX
Lot Code
(Prod mode - 4 digit SPN code)
Assembly site code
Per SCOP 200-002
ORDER INFORMATION
Basic Part (Non-Lead Free)
14-Lead IR2110 order IR2110
14-Lead IR2113 order IR2113
16-Lead IR2110S order IR2110S
16-Lead IR2113S order IR2113S
Leadfree Part
14-Lead IR2110 order IR2110PbF
14-Lead IR2113 order IR2113PbF
16-Lead IR2110S order IR2110SPbF
16-Lead IR2113S order IR2113SPbF
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105
Data and specifications subject to change without notice. 3/23/2004
16
www.irf.com
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.