SportsArt Tech Tip
Issue Summary
Applies To
Detailed Problem Description
Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Rowers and Steppers
This procedure gives a basic overview of the MPH / KPH function, the 3 methods used
on SportsArt equipment for changing the measurement units between MPH / KPH, and
step-by-step instructions on how to change the measurement units on each type and
model of equipment.
1) MPH / KPH function overview
Procedure Overview
1) MPH / KPH Overview
2) Step-by-step Instruction Tables
A common issue with all equipment is that the speed seems slow. For example, at
speed 5 the unit feels to operate at speed 3. Usually there’s nothing wrong with the
equipment; a user has accidentally switched the speed/distance unit mode from MPH
to KPH.
Speed/distance units are changed in one of three ways: (1) by pressing a sequence of
keys on the unit; (2) by moving a jumper on the display PC board; (3) by the software,
which is put in place when the unit is shipped from the factory.
2) Step-by-Step Instruction
Tables
A)
B)
C)
D)
Treadmills
Cycles
Ellipticals
Cross Trainers and
Rowers
E) Steppers
Mph-Kph Detailed Instructions Printed: 12/19/2012
www.sportsartamerica.com
A)
B)
C)
D)
Treadmills :
Cycles :
Ellipticals :
X – Trainers :
and Rowers
E) Steppers :
See Table #1 (page 2 – 3)
See Table #2 (page 4 – 6)
See Table #3 (page 7 – 8)
See Table #4 (page 9)
See Table #5 (page 10)
Page 1 of 10
Contact us: 866-709-1750 or service@sportsartamerica.com
SportsArt Tech Tip
Issue Summary
Applies To
2) Step-by-Step Instructions
Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Rowers and Steppers
A) Treadmills
Table #1
Model Number
3007
3100 (HR)
3108
3110
3150
3250
6003
6005
Instructions
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press ENTER key.
2. “MALE/FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER key to
confirm your choice.
3. “MPH” or “KPH” appears. Press  or  key to select MPH or KPH. Press ENTER key to
confirm your choice.
4. “ENTER WEIGHT appears. Press + or – to select your weight. Press ENTER key to confirm
your choice.
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press ENTER key.
2. “MALE/FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER key to
confirm your choice.
3. “MPH” or “KPH” appears. Press  or  key to select MPH or KPH. Press ENTER key to
confirm your choice.
4. “ENTER WEIGHT” appears. Press  or  key to select your weight. Press ENTER key to
confirm your choice.
1. Turn on unit power. Put safety key in place. “SELECT MODE USER1-USER4” appears. Do not
press SPEED  or  key. Press MODE  or  key to select a USER number, then
press ENTER key.
2. “SELECT MODE   MPH/KPH” appears. “MPH” or “KPH” appears. Press MODE  or  key
to select MPH or KPH. Press ENTER key to confirm your choice.
3. ”ENTER WEIGHT” appears. A weight appears. Press  or  key to select your weight.
Press ENTER key to confirm your choice. Follow prompts for IRC control.
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press ENTER key.
2. “MALE/FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER key to
confirm your choice.
3. “MPH” or “KPH” appears. Press  or  key to select MPH or KPH. Press ENTER key to
confirm your choice.
4. “ENTER WEIGHT” appears. A weight appears in 4 seconds. Press  or  key to select your
weight. Press ENTER key to confirm your choice.
1. Press MANUAL/SET key until “SET” appears. Press ENTER key.
2. “MPH” or “KPH” appears. Press  or  key to select MPH or KPH. Press ENTER key to
confirm your choice.
3. “MALE/FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER key to
confirm your choice.
4. “ENTER WEIGHT” appears. Press  or  key to select your weight. Press ENTER key to
confirm your choice.
Mph-Kph Detailed Instructions Printed: 12/19/2012
www.sportsartamerica.com
Page 2 of 10
Contact us: 866-709-1750 or service@sportsartamerica.com
SportsArt Tech Tip
Issue Summary
Applies To
2) Step-by-Step Instructions
Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Rowers and Steppers
A) Treadmills (continued)
Table #1 (continued)
6150
6150E
1096,1098,1190,
1200, 1200N,
6200
1210,1250,1260,
3106,3120,3200,
6100,6100E,6300,
TR63
6310
6320
TR20/TR20F
PF-T2.00F
TR21/TR21F
TR31,TR32,TR33
T610/T611
T620/T621
T630/T631
T650/T650M
T652/T652M
T672
T670/T670E
T680/T680E
1. Press “MANUAL/SET” key until “SET” appears. Press ENTER key.
2. “MPH” or “KPH” appears. Press  or  key to select MPH or KPH. Press ENTER key to
confirm your selection.
3. “MALE” or “FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER
key to confirm your selection.
4. “ENTER WEIGHT” appears. Press  or  key to select your weight. Press ENTER key to
confirm your selection.
The MPH/KPH adjustment is made by switching a jumper connection on the rear of the display
board.
Determined by the IC chip. All IC chips in this market use American standard units, MPH.
1. Turn on unit. “SPORTSART” scrolls. “6310/6320” appears. Hold the CHANGE key for three
seconds.
2. “PRESS  TO SELECT MPH/KPH, PRESS ENTER” scrolls. “MPH” or “KPH” appears. Press
 or  key to select KPH or MPH. Press ENTER to confirm your choice.
3. “PRESS  TO SELECT MODIFY HRC TARGET HR (Y/N)?, PRESS ENTER” scrolls. “NO” or
“YES” appears. Press  or  key to select your target heart rate. Press ENTER key to confirm
your selection.
1. Remove SAFETY KEY press DISPLAY CHANGE key for 3 seconds, program versions for
display and drive boards are shown, press ENTER to show MPH or KPH
2. Press incline  or  keys to select unit preference, then press ENTER to confirm your choice.
Follow prompts to show distance or press STOP to end and return to SAFETY KEY display.
1. Turn on the unit. While the startup banner appears, hold the CHANGE key for three seconds.
2. Press incline  or  keys to select unit preference, then press ENTER to confirm your choice.
1. Turn unit on. While the startup banner appears, hold the “DISPLAY CHANGE” key for three
seconds. “UNIT-MPH” or “UNIT-KPH” appears.
2. Press incline  or  keys to select unit preference, then press ENTER to confirm your choice.
Follow prompts to see time and software versions.
1. Turn unit on. While the startup banner appears, hold the “DISPLAY CHANGE” key for three
seconds. “UNIT-MPH” or “UNIT-KPH” appears.
2. Press incline  or  keys to select unit preference, then press ENTER to confirm your choice.
Follow prompts to see time and software versions.
1. Turn unit on. While the startup banner appears, hold the ENTER key for three seconds. “UNITMPH” or “UNIT-KPH” appears.
2. Press  or  keys (display left, under ENTER key only, not lower keypad incline and speed
keys) to select unit preference, then press ENTER to confirm your choice. Follow prompts to
see Distance, Time, TFT IC (680 only), CTL IC and DRV IC.
Mph-Kph Detailed Instructions Printed: 12/19/2012
www.sportsartamerica.com
Page 3 of 10
Contact us: 866-709-1750 or service@sportsartamerica.com
SportsArt Tech Tip
Issue Summary
Applies To
2) Step-by-Step Instructions
Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Rowers and Steppers
B) Cycles
Table #2
Model
5002
5005
5002B(H)
5005B(H)
5007R
5009U
5100U
5150R
5200U
C5150R
C5200U
C50R/U
506,508,C51R/U,
C52R/U,C53R/U
C520R/U
C521R/U,C521M
UB521M
C531R/U
C532R/U
C570R/U
C572R/U,G572R/U
C580R/U
Instructions
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press ENTER key.
2. “PRESS  TO SELECT MILE/KILO” appears. Press  or  key to select MILE or KILO.
Press ENTER key to confirm your selection.
3. “MALE” or “FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER
key to confirm your choice.
4. “PRESS  TO INPUT WEIGHT” appears. Press  or  key to select your weight.
Press ENTER key to confirm your choice.
1. Press  key to select “SET”. Press ENTER/MODE key to confirm your choice.
2. “PRESS  TO SELECT MILE OR KILO” appears. Press  or  key to select MILE or KILO.
Press ENTER/MODE to confirm your choice.
3. “ENTER WEIGHT” scrolls across the screen. A weight appears. Press  or  key to select
your weight. Press ENTER/MODE key to confirm your choice.
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press ENTER key.
2. “PRESS  KEY TO SELECT MILE/KILO” appears. Press  or  key to select MILE or
KILO. Press ENTER key to confirm your selection.
3. You are prompted to select male or female. Press  or  key to select the male or female
symbol. Press ENTER key to confirm your choice.
4. “ENTER WEIGHT” scrolls across the screen. A weight appears. Press  or  key to select
your weight. Press ENTER key to confirm your choice.
1. Start exercising on unit. Display shows model number. Simultaneously press and hold LEVEL
and LEVEL keys three seconds. HR window shows “NO” or “YES”. “PRESS TO SELECT
MODIFY HRC TARGET HR, PRESS ENTER“ scrolls. “MDFY” appears. Press LEVEL 
or LEVEL key to select your choice. Press ENTER to confirm your choice.
2. “PRESS TO SELECT LB/KG” scrolls. “LB” or “KG” appears. Press LEVEL  or LEVEL key
to select your choice. Press ENTER to confirm your choice.
1. While startup screen is visible, hold the ENTER key for three seconds. MPH or KPH appears.
Press up/down keys to toggle. Press ENTER to confirm your choice.
1. The MPH/KPH adjustment is made by switching a jumper connection on the rear of the display
board. (C52: See Illustration #1, page 5. C53: See Illustration #2, page 6)
1. Pedal to start. While startup screen is visible, hold the CHANGE key for three seconds. UNIT –
LB or UNIT – KG appears. Press  keys to toggle. Press the ENTER key to confirm your
choice.
1. Pedal and don’t press other keys. Hold the ENTER key three seconds. KPH or MPH appears.
2. Press  keys to toggle to KPH or MPH setting.
3. Press ENTER key to confirm your choice. Press ENTER key to see Distance, Time, and CTL
IC.
Mph-Kph Detailed Instructions Printed: 12/19/2012
www.sportsartamerica.com
Page 4 of 10
Contact us: 866-709-1750 or service@sportsartamerica.com
SportsArt Tech Tip
Issue Summary
Applies To
2) Step-by-Step Instructions
Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Rowers and Steppers
B) Cycles
C52 Jumper Settings
1. KPH: With JP1 inserted, distances will be measured as KPH.
2. MPH: With JP1 not inserted, distances will be measured as MPH.
Illustration #1
KPH
MPH
Mph-Kph Detailed Instructions Printed: 12/19/2012
www.sportsartamerica.com
Page 5 of 10
Contact us: 866-709-1750 or service@sportsartamerica.com
SportsArt Tech Tip
Issue Summary
Applies To
2) Step-by-Step Instructions
Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Rowers and Steppers
B) Cycles
C53 Jumper Setting
1. KPH: With JP1 inserted, distances will be measured as KPH.
2. MPH: With JP1 not inserted, distances will be measured as MPH.
Illustration #2
KPH
MPH
Mph-Kph Detailed Instructions Printed: 12/19/2012
www.sportsartamerica.com
Page 6 of 10
Contact us: 866-709-1750 or service@sportsartamerica.com
SportsArt Tech Tip
Issue Summary
Applies To
2) Step-by-Step Instructions
Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Rowers and Steppers
C) Ellipticals
Table #3
Model
803P
805P
807P
8003
8007
8100
8300
E8300
E80
E81
E83
Instruction
1. Do not exercise on unit. (Unit must not be moving.)
2. In manual mode, hold the ENTER key for three seconds. Either “KG“ or “LB” appears on the
display.
3. Hold ENTER key down again for three seconds to change weight units.
1. In manual mode, hold the MODE key for three seconds. “SET“ appears on the display.
Press ENTER key.
2. “KG” or “LB” appears. Press MODE  or  key to select KG or LB. Press ENTER to confirm
your selection.
3. A weight appears. Press MODE  or  key to select your weight. Press ENTER to confirm your
selection.
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press the ENTER key.
2. “PRESS  TO SELECT KG/LB” appears. Press  or  key to select KG or LB.
Press ENTER key to confirm your choice.
3. “PRESS  TO INPUT WEIGHT” appears. Press  or  key to select your weight.
Press ENTER key to confirm your choice.
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press the ENTER key.
2. “PRESS + -- TO SELECT KG/LB” appears. Press + or -- key to select KG or LB. Press ENTER
key to confirm your choice.
3. “PRESS + -- TO SELECT INPUT WEIGHT” appears. Press + or -- key to select your weight.
Press ENTER key to confirm your choice.
1. In manual mode, simultaneously press MODE  and MODE  keys for three seconds. KG or
LB will appear. Press MODE  or  to choose between LB and KG. Press ENTER key to
confirm your choice.
1. Start exercising on unit. Display shows model number. Simultaneously press and
hold
LEVEL and LEVEL keys three seconds. HR window shows “no” or “YES”. “PRESS
TO SELECT MODIFY HRC TARGET HR, PRESS ENTER“ scrolls. “MDFY” appears.
Press LEVEL  or LEVEL key to select your choice. Press ENTER to confirm your choice.
2. “PRESS TO SELECT LB/KG” scrolls. “LB” or “KG” appears. Press LEVEL  or LEVEL key to
select your choice. Press ENTER to confirm your choice.
1. Turn on unit. Press the START key to enter user mode. Select a user.
2. Simultaneously hold WORKOUT LEVEL  + WORKOUT LEVEL  for three seconds. Total
distance appears. Follow prompts to see time, then see the LB or KG setting. Press  or 
keys to toggle to your choice. Press ENTER to confirm your LB or KG setting.
1. Turn on unit. Simultaneously press and hold LEVEL  + LEVEL  + ENTER keys for three
seconds.
Mph-Kph Detailed Instructions Printed: 12/19/2012
www.sportsartamerica.com
Page 7 of 10
Contact us: 866-709-1750 or service@sportsartamerica.com
SportsArt Tech Tip
Issue Summary
Applies To
2) Step-by-Step Instructions
Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Rowers and Steppers
C) Ellipticals (continued)
Table #3 (continued)
E82, E820
E821 (E85)
E822,E825 (E86)
E830 (E87),E850
E862,G862
E870
E872,G872
E880
1. The E82/E820 MPH / KPH adjustment is made by changing two dip-switch settings on the rear
of the display board. (See Illustration #3, below)
1. Turn on unit. While the startup banner appears, hold the CHANGE key for three seconds.
2. Units of measurement appear. Press  or  keys to toggle to your choice. Press ENTER to
confirm your LB or KG setting. Follow prompts to see Time, Distance, and the display IC
version.
1. Turn on unit. While the startup banner appears, hold the ENTER key for three seconds.
2. Units of measurement appear. Press  or  keys to toggle to your choice. Press ENTER to
confirm your LB or KG setting. Follow prompts to see Time, Distance, and the display IC and
drive board version.
E82 KPH/MPH Toggle Switch
1. KPH: Set the dip switches (SW-DIP2) toward 1 & 2 markings to get KPH.
2. MPH: Set the dip switches (SW-DIP2) toward the ON marking to get MPH.
Illustration #3
KPH
MPH
Mph-Kph Detailed Instructions Printed: 12/19/2012
www.sportsartamerica.com
Page 8 of 10
Contact us: 866-709-1750 or service@sportsartamerica.com
SportsArt Tech Tip
Issue Summary
Applies To
2) Step-by-Step Instructions
Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Rowers and Steppers
D) X-Trainers and Rowers
Table #4
X-Trainers
XT10
XT20
XT50
Rowers
2100
Instructions
1. Start exercising and don’t press any other keys. At start up screen, simultaneously
press
LEG Work Level  keys.
2. Dot matrix display shows MDFY. Heart rate window shows YES or NO. Press  keys to
toggle. Choose YES. Press ENTER to confirm your choice.
3. KG or LB appears in the dot matrix screen. Press  keys to toggle. Press the ENTER key to
confirm your choice.
1. When the startup screen appears, press the START key. The USER indicator flashes.
2. Simultaneously press WORKOUT LEVEL ▼ and WORKOUT LEVEL▲ keys for three seconds.
Time and distance windows show total distance as eight digits. Units appear as MILE or KM.
Press the ENTER key to proceed.
3. Time and distance windows show total time as four digits. "HOUR" appears in the workout
profile window. Press the ENTER key to proceed.
4. Press WORKOUT LEVEL? or WORKOUT LEVEL▲ to toggle between "LB" and "KG”. Press the
ENTER key to return to the start up screen.
In this setting, press the STOP/HOLD TO RESET key at any time to return to the start up
screen.
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press ENTER key.
2. “SELECT METER OR FEET” appears. Press + or -- key to select METER or FEET.
Press ENTER key to confirm your choice.
Mph-Kph Detailed Instructions Printed: 12/19/2012
www.sportsartamerica.com
Page 9 of 10
Contact us: 866-709-1750 or service@sportsartamerica.com
SportsArt Tech Tip
Issue Summary
Applies To
2) Step-by-Step Instructions
Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Rowers and Steppers
E) Steppers
Table #5
Steppers
7005
7100
S7100
S770
S772
Instructions
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press the ENTER key.
2. “PRESS + --   TO SELECT METER/FEET” appears. Press +, --,  or  key to select
METER or FEET. Press ENTER key to confirm your choice.
3. “ENTER WEIGHT” appears. A weight appears. Press + or -- key to select your weight.
Press ENTER key to confirm your choice.
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press the ENTER key.
2. “PRESS   TO SELECT MILE/KILO” appears. Press  or  key to select MILE or KILO.
Press ENTER key to confirm your choice.
3. “ENTER WEIGHT” appears. Press  or  key to select your weight. Press ENTER key to
confirm your choice.
1. Start exercising on unit. Display shows model number. Simultaneously press and
hold
LEVEL and LEVEL keys three seconds. HR window shows “no” or “YES”. “PRESS
TO SELECT MODIFY HRC TARGET HR, PRESS ENTER“ scrolls. “MDFY” appears.
Press LEVEL  or LEVEL key to select your choice. Press ENTER to confirm your choice.
2. “PRESS TO SELECT LB/KG” scrolls. “LB” or “KG” appears. Press LEVEL  or LEVEL key to
select your choice. Press ENTER to confirm your choice.
1. To check the system default setting, at the start up screen (select PROGRAM or QUICK
START). Hold the ENTER key for 3 seconds:
2. Unit of Speed (MPH or KPH): Press ▲/▼ keys to change the speed unit setting. Press ENTER
to confirm your choice and to see the next setting. You may also press STOP to leave this
setting.
Mph-Kph Detailed Instructions Printed: 12/19/2012
www.sportsartamerica.com
Page 10 of 10
Contact us: 866-709-1750 or service@sportsartamerica.com