SCREWS, NUTS
AND BOLTS
Nylon Machine Screws
Part No.
256X.125
256X.187
256X.250
256X.312
Size
2/56
256X.375
256X.437
256X.500
256X.625
256X.750
440X.125
440X.187
440X.250
440X.312
Nylon screws are anti-corrosive,
non-marring, tough and lightweight.
They conform to irregular surfaces
and are friction, abrasion and vibration
resistant, and good electrical and
thermal insulators.
Specify head style by adding the
following suffixes when ordering:
B = binding
FI = fillister
H = hex
P = pan
R = round
S = set
SH = slotted hex
4/40
Length
1/8
3/16
1/4
5/16
Part No.
832X.437
832X.500
832X.625
832X.750
3/8
7/16
1/2
5/8
3/4
832X.875
832X1.000
832X1.250
832X1.500
1/8
3/16
1/4
5/16
440X.375
440X.437
440X.500
440X.625
3/8
7/16
1/2
5/8
440X.750
440X.875
440X1.000
440X1.250
3/4
7/8
1
1-1/4
632X.125
632X.187
632X.250
632X.312
6/32
1/8
3/16
1/4
5/16
632X.375
632X.437
632X.500
632X.625
3/8
7/16
1/2
5/8
632X.750
632X 1.000
632X 1.250
632X 1.500
3/4
1
1-1/4
1-1/2
832X.187
832X.250
832X.312
832X.375
8/32
3/16
1/4
5/16
3/8
1024X.250
1024X.312
1024X.375
1024X.500
Size
8/32
Length
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
10/24
1/4
5/16*
3/8*
1/2
1024X.750
1024X1.000
1024X1.500
1032X.125
1032X.187
1032X.250
1032X.312
3/4*
1
1-1/2*
1/8
3/16
1/4
5/16
10/32
1032X.375
1032X.500
1032X.625
1032X.750
3/8
1/2
5/8
3/4
1032X.875
1032X1.000
1032X1.250
1032X1.500
7/8*
1
1-1/4
1-1/2
1420X.250
1420X.312
1420X.375
1420X.500
1/4-20
1/4
5/16
3/8
1/2
1420X.625
1420X.750
1420X.875
1420X1.000
5/8
3/4
7/8
1
Continued
Minimum order: 100. (Slotted Hex: minimum 1000.)
Other sizes and lengths available.
*Set screw not available.
Some lengths available in Phillips head.
Other materials on page 210. Technical data on pages 111-112.
108
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Nylon Machine Screws CONTINUED
Part No.
Size
Length
1420X1.250
1420X1.500
1420X2.000
1/4-20
1-1/4
1-1/2
2
1428X.500
1428X.625
1428X.750
1/4-28
1/2
5/8
3/4
1428X1.000
1428X1.250
1428X1.500
1
1-1/4
1-1/2
Minimum order: 100.
(Slotted Hex: minimum 1000.)
Other sizes and lengths available.
Size
Length
51618X.500
51618X.750
51618X1.000
51618X1.250
51618X1.500
Part No.
5/16-18†
1/2
3/4
1
1-1/4
1-1/2
3816X.500
3816X.750
3816X1.000
3816X1.250
3816X1.500
3/8-16**
1/2
3/4
1
1-1/4
1-1/2
**Round, fillister and set only.
† Binding or fillister only.
Some lengths available in Phillips head.
Other materials on page 210.
Technical data on pages 111-112.
Specify head style by adding the
following suffixes when ordering:
B = binding
FI = fillister
H = hex
P = pan
R = round
S = set
SH = slotted hex
Polycarbonate screws are available in
clear where quantities warrant.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
109
Nylon Machine Screws CONTINUED
FLAT AND OVAL HEAD
Part No.
Size
Length
256X.187
256X.250
256X.312
256X.375
2/56
3/16
1/4
5/16
3/8
256X.500
256X.625
256X.750
440X.187
440X.250
440X.312
440X.375
1/2
5/8
3/4
4/40
440X.500
440X.625
440X.750
440X1.000
440X1.250
Specify head style by adding the
following suffixes when ordering:
F = flat
OV = oval
632X.187
632X.250
632X.312
632X.375
1/2
5/8
3/4
1
1-1/4
6/32
632X.500
632X.625
632X.750
632X1.000
632X1.250
832X.250
832X.312
832X.375
832X.500
832X.625
832X.750
832X1.000
3/16
1/4
5/16
3/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
8/32
1/4
5/16
3/8
1/2
Part No.
Size
Length
1024X.500
10/24
1/2
1032X.250
1032X.312
1032X.375
1032X.500
10/32
1/4
5/16
3/8
1/2
3/4
1
1-1/4
1-1/2
1032X.750
1032X1.000
1032X1.250
1032X1.500
1420X.250
1420X.500
1420X.625
1420X.750
1/4-20
7/8
1
1-1/4
1-1/2
2
1420X.875
1420X1.000
1420X1.250
1420X1.500
1420X2.000
51618X1.000
5/16-18
1
3816X1.000
3816X1.500
3816X2.000
3/8-16
1
1-1/2
2
1213X1.250
1/2-13
1-1/4
Flat head minimum order: 100.
Oval head minimum order: 1000.
Other sizes and lengths available.
Other materials on page 210.
Technical data on page 111-112.
5/8
3/4
1
Complementary solutions? Nuts on pages 125–134, washers on pages 186–200.
Possibility of something more attractive?
Screw covers on page 64.
110
1/4
1/2
5/8
3/4
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Nylon Machine Screws CONTINUED
TECHNICAL DATA. NOMINAL DIMENSIONS (INCHES)
Thread Size
Head Type
#2
#3
#4
#5
#6
#8
#10
1/4
5/16
3/8
BH
BD
.050
.175
.056
.203
.065
.235
.073
.256
.080
.290
.110
.350
.120
.380
.155
.500
—
—
—
—
LH
LD
.075
.140
.087
.153
.100
.180
.100
.196
.125
.215
.150
.255
.175
.300
.230
.400
—
—
.335
.606
HH
HF
HD
.040
.125
.140
.050
.180
.205
.055
.180
.205
.064
.180
.205
.085
.250
.283
.110
.250
.270
.110
.310
.340
.175
.370
.425
.219
.495
.545
—
—
—
PH
PD
.050
.160
.056
.186
.065
.210
.070
.238
.075
.265
.080
.320
.110
.365
.160
.475
.170
.604
—
—
RH
RD
.070
.150
.075
.175
.090
.210
—
—
.100
.260
.110
.290
.130
.325
.160
.475
—
—
—
—
SH
.035
—
.045
—
.055
.055
.060
.080
—
—
OH
FH
(O)FD
.070
.055
.172
—
—
—
.090
.070
.225
—
—
—
.110
.085
.280
.140
.100
.332
.160
.120
.385
.220
.115
.507
.270
.191
.602
.325
.230
.723
Data listed is for reference purposes only.
Steel Core Round, Fillister and Flat heads, same as above.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
111
Nylon Machine Screws CONTINUED
TECHNICAL DATA
Moulded Nylon Screws
Moulded nylon parts are subject to moisture loss and gain. In
moulded nylon screws, moistness or dryness can cause subtle
size changes. The same is true for temperature change.
Additionally, there are tooling problems because all screws
come from cavities parted along the screw length. Although the
moulds are dowelled and pinned to provide mould match, in the
course of moulding, wear takes place on the pins, on the mould
face and base and even on the moulding machine itself, thus
working against ideal alignment. Moulded nylon screws are not
held to tolerances as close as those for metal screws. However,
the slight mismatch and the natural fractional flash are not as
serious as they would be in metal. Nylon, being flexible, is also
forgiving of tolerance lapses.
Nylon cannot be held to tolerances that apply to metal and
the use of gauges to measure the screws just doesn’t work.
They are tested by trying them in their actual applications.
Otherwise, it is impractical for the customer to use them or the
supplier to make them.
Amazingly enough, they work.
Nylon Machine Screws
Size
4/40
6/32
8/32
10/24
10/32
1/4-20
Ultimate
Torque
24 In. Oz.
30 In. Oz.
5 In. Lbs.
6 In. Lbs.
7 In. Lbs.
13 In. Lbs.
Maximum Torque
Before Deformation
12-16 In. Oz.
18-20 In. Oz.
2-3 In. Lbs.
2-4 In. Lbs.
3-4 In. Lbs.
9-10 In. Lbs.
Data listed is for reference purposes only.
112
Tensile Test
Yield lbs.
Break lbs.
38
41
65
69
99
108
139
149
155
165
296
312
Double Shear
Yield lbs.
Break lbs.
45
50
91
97
158
164
187
257
234
241
413
432
All tests performed per ASTM specifications. Parts
moulded in Nylon 6/6 Dupont Zytel 101, dry as
moulded, unmoisturized, at 73°F. Results are
average of random parts tested.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Metric Nylon Machine Screws
Part No.
Size
Length (mm)
Part No.
Size
M2X5
M2X6
M2X8
M2X10
M2
Pitch .40
5
6
8
10
M5X6
M5X8
M5X10
M5X12
M5
Pitch .80
12
16
20
M5X16
M5X20
M5X25
16
20
25
5
6
10
12
M5X30
M5X35
M5X40
30
35
40
M2X12
M2X16
M2X20
M2.5X5
M2.5X6
M2.5X10
M2.5X12
M2.5
Pitch .45
M2.5X16
M2.5X20
M2.5X25
M3X5
M3X6
M3X8
M3X10
16
20
25
M3
Pitch .50
M3X12
M3X16
M3X20
M3X25
M3X30
Serving the same purpose as
the standard nylon machine screws
(pages 108-110) but with metric
threads, diameters and lengths. They
are anti-corrosive, non-marring, tough
and lightweight.
Add the following suffixes to specify
head styles when ordering:
C = cheese
SG = slotted grub
F = flat
SH = slotted hex
P = pan
ST = slotted thumb
M3.5X5
M3.5X6
M3.5X8
M3.5X10
12
16
20
25
30
M3.5
Pitch .60
M3.5X12
M3.5X16
M3.5X20
M3.5X25
M3.5X35
M4X6
M4X8
M4X10
M4X12
5
6
8
10
5
6
8
10
12
16
20
25
35
M4
Pitch .70
M4X16
M4X20
M4X25
M4X30
M4X35
M4X40
6
8
10
12
16
20
25
30
35
40
M6X8
M6X10
M6X12
M6X16
Length (mm)
M6
Pitch 1.00
M6X20
M6X25
M6X30
M6X35
M6X40
6
8
10
12
8
10
12
16
20
25
30
35
40
M8X10
M8X16
M8X20
M8X25
M8X30
M8X35
M8
Pitch 1.25
10
16
20
25
30
35
M10X10
M10X12
M10X16
M10X20
M10
Pitch 1.50
10
12
16
20
M10X25
M10X30
M10X35
M10X40
25
30
35
40
Other lengths available.
Slotted Grub Screws in sizes M4 to M10 only.
Slotted Thumb Screws in sizes M3 to M6 only.
Flat head not available in size M6x30.
Technical data on page 114.
Metric nuts on page 127,
metric washers on page 191.
Minimum order: 1000.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
113
Metric Nylon Machine Screws CONTINUED
TECHNICAL DATA. NOMINAL METRIC DIMENSIONS (mm)
Screw Size
Head Type
M2
2.5
3
3.5
4
5
6
8
10
#2
#3
#4
#6
#8
#10
1/4
5/16
3/8
D
H
4.0
1.2
5.0
1.5
6.0
1.8
7.0
2.1
8.0
2.4
10.0
3.0
12.0
3.6
16.0
4.8
20.0
6.0
F
D
H
3.2
3.38
1.15
4.0
4.28
1.3
5.5
5.4
2.0
6.0
6.93
2.15
7.0
7.59
2.8
8.0
8.71
3.5
10.0
10.95
4.0
13.0
14.26
5.0
17.0
17.62
7.0
D
H
4.0
1.2
5.0
1.25
6.0
1.5
7.0
1.75
8.0
2.0
10.0
2.5
12.0
3.0
16.0
4.0
20.0
5.0
SD
T
—
—
—
—
—
—
—
—
2.0
0.76
3.3
1.3
4.1
1.5
5.2
2.4
6.6
2.8
D
H
—
—
—
—
5.5
8.1
6.4
8.8
7.1
9.7
8.1
10.5
8.3
12.5
—
—
—
—
D
H
3.8
1.3
4.5
1.6
5.5
2.0
6.0
2.4
7.0
2.6
8.5
3.3
10.0
3.9
13.0
5.0
16.0
6.0
Approximate American
Standard equivalent
Data listed is for reference purposes only.
114
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Metal Core Nylon Screws
Stocked in round and fillister
heads. Also available in round
washer head and flat head.
A hardened, cadmium plated,
corrugated steel core inside a nylon
screw. Provides up to four times the
strength of standard nylon fasteners.
Recommended in applications
requiring electrical, thermal and
vibration insulation in shear or
double shear connections. The
recessed metal heads allow
adequate torque and may be driven
with power drivers.
Part No.
Size
Length
MC 632X.250
MC 632X.375
MC 632X.500
6/32
1/4
3/8
1/2
MC 832X.375
MC 832X.500
8/32
3/8
1/2
MC
MC
MC
MC
1032X.375
1032X.500
1032X.750
1032X1.000
10/32
3/8
1/2
3/4
1
MC
MC
MC
MC
MC
1420X.375
1420X.500
1420X.625
1420X.750
1420X1.000
1/4-20
3/8
1/2
5/8
3/4
1
Minimum order: 100.
Add the following suffixes to
specify head styles when ordering:
R = Round
FI = Fillister
TECHNICAL DATA
Size
6/32
8/32
10/32
1/4-20
Ultimate
Torque
Max. Torque
Before Deformation
1 in. lbs.
3 in. lbs.
5 in. lbs.
12 in. lbs.
Data listed is for reference purposes only.
1.5 in. lbs.
4 in. lbs.
6 in. lbs.
13 in. lbs
Tensile Test
Yield lbs.
Break lbs.
24
66
96
120
32
72
104
174
Double Shear
Yield lbs.
Break lbs.
200
300
600
1400
240
360
640
1600
All tests performed per ASTM
specifications. Parts moulded in Nylon 6/6
Dupont Zytel 101, dry as moulded,
unmoisturized, at 73°F. Results are
average of random parts tested.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
115
Nylon Hex Bolts (Cap Screws)
Part No.
Slotted Hex
Hex
Also available:
Size
Length
1/4-20*
3/8
1/2
5/8
3/4
B
B
B
B
3816X.500
3816X.750
3816X1.000
3816X1.250
Socket Set
Add the following suffixes
to specify head styles
when ordering:
H =
SH =
HS =
SS =
hex
slotted hex
hex socket
socket set
Size
Length
3/8-16
1/2
3/4
1
1-1/4
B
B
B
B
1420X.375
1420X.500
1420X.625
1420X.750
B
B
B
B
1420X1.000
1420X1.250
1420X1.500
1420X2.000
1
1-1/4
1-1/2
2
B
B
B
B
3816X1.500
3816X2.000
3816X2.500
3816X3.000
B 1420X2.500
B 1420X3.000
2-1/2
3
B
B
B
B
1213X.500
1213X.750
1213X1.000
1213X1.250
B
B
B
B
1213X1.500
1213X2.000
1213X2.500
1213X3.000
B
B
B
B
5811X.500
5811X1.000
5811X2.000
5811X4.000**
5/8-11
1/2
1
2
4
B 3410X.750
B 3410X4.000**
B 3410X5.500
3/4-10
3/4
4
5-1/2
B 789X.750
B 789X4.500**
7/8-9
3/4
4-1/2
B
B
B
B
1428X.500
1428X.625
1428X.750
1428X1.000
1/4-28
B
B
B
B
51618X.500
51618X.750
51618X1.000
51618X1.250
B
B
B
B
51618X1.500
51618X2.000
51618X2.500
51618X3.000
1/2
5/8
3/4
1
1-1/4
1-1/2
B 1428X1.250
B 1428X1.500
Hex Socket
Part No.
5/16-18
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
Minimum order:
Hex Head: 100, Slotted Hex: 500.
Hex Socket and Socket Set available at
additional charge. Minimum order 1000.
1-1/2
2
2-1/2
3
1/2-13
1-1/2
2
2-1/2
3
* Also available in socket head and Phillips fillister.
**Fully threaded.
Longer lengths available.
Other materials on page 210. Technical data on page 117.
Thread length:
Bolts are usually threaded as follows:
(Diameter x 2) + 1/2 inch.
116
1/2
3/4
1
1-1/4
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Nylon Hex Bolts (Cap Screws) CONTINUED
TECHNICAL DATA
Size
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
Ultimate
Torque
Maximum Torque
Before Deformation
19 In. Lbs.
37 In. Lbs.
49 In. Lbs.
11 Ft. Lbs.
22 Ft. Lbs.
15-16 In. Lbs.
32-34 In. Lbs.
45-46 In. Lbs.
7-8 Ft. Lbs.
18-19 Ft. Lbs.
Tensile Test
Yield lbs.
Break lbs.
200
403
480
1393
2260
228
424
513
1425
2303
Double Shear
Yield lbs.
Break lbs.
413
866
1108
2276
3340
432
880
1173
2313
3410
All tests performed per ASTM specifications. Parts moulded in
Nylon 6/6 Dupont Zytel 101, dry as moulded, unmoisturized, at
73°F. Results are average of random parts tested.
NOMINAL DIMENSIONS (INCHES)
Thread Size
Head Type
#4
#6
#8
#10
1/4
5/16
3/8
1/2
5/8
HCH
HCD
HCF
—
—
—
—
.175
.500
.425
.215
.555
.485
.250
.625
.565
.320
.850
.740
.390
1.100
.935
SCH
SCD
SCF
(SCI)
.110
.180
.094
.051
.136
.222
.109
.064
.162
.265
.141
.077
.188
.310
.156
.090
.248
.370
.188
.120
.310
.465
.250
.150
.370
.560
.313
.180
.495
.745
.375
.240
.620
.930
.500
.305
SSF
(SSI)
.050
.070
.062
.080
.078
.090
.094
.100
.125
.125
.156
.156
.188
.188
.250
.250
.312
.312
Data listed is for reference purposes only.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
117
Nylon Carriage Bolts
C
A
Part No.
1420X.500CB
1420X.750CB
1420X1.000CB
B
Length
A
B
C
1/2
3/4
1
.570
.570
.575
.130
.130
.130
.140
.170
.140
Moulded Nylon Nails
For use where electrical or thermal
insulation is needed, or metal might spark
and cause explosion. This non-staining,
weatherproof, resilient nail is easily driven
Part No.
NA 1L
118
Head (flat)
1/4 X 1/16
into soft materials or pre-drilled undersize
holes. Good choice for fibreglass roofing
and siding jobs, marine construction.
Body
1/8 X 1-1/4
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Machined PVC Hex Bolts (Cap Screws)
As well as PVC, these are available
in delrin, polypropylene, teflon and
other materials in sizes from 1/4-20
to 1"-8, and lengths up to 6".
Part No.
VB 1420X.750H
VB 1420X1.000H
Size
1/4-20
Length
3/4
1
VB 51618X1.000H
5/16-18
1
VB 3816X.750H
VB 3816X1.000H
3/8-16
3/4
1
VB 1213X1.000H
VB 1213X1.500H
1/2-13
1
1-1/2
Minimum order 100.
Nylon Thumb Screws
KNURLED THUMB SCREWS
Thumb screws offer easy assembly
and adjustment and will not cut fingers.
Vibration-resistant, they stay in place
and are knurled for positive grip. These
can be used as an economical alternative
for knobs.
Part No.
Size
Length
D
TS 440X.250
4/40
1/4
.300
TS 632X.250
TS 632X.500
6/32
1/4
1/2
.360
TS 832X.375
8/32
3/8
.425
TS 1024X.500
TS 1024X.750
10/24
1/2
3/4
.425
TS 1032X.500
TS 1032X.750
TS 1032X1.000
10/32
1/2
3/4
1
.425
TS
TS
TS
TS
TS
1/4-20
1/2
3/4
1
1-1/4
1-1/2
.540
TS 51618X1.000
5/16-18
1
.625
TS 3816X1.500
3/8-16
1-1/2
.687
1420X.500
1420X.750
1420X1.000
1420X1.250
1420X1.500
Minimum order 1000.
Other sizes and lengths available.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
119
Nylon Thumb Screws CONTINUED
SLOTTED
Part
STS
STS
STS
STS
STS
STS
No.
440X.250
440X.312
440X.375
440X.500
440X.625
440X1.000
Size
4/40
Length
1/4
5/16
3/8
1/2
5/8
1
D
.317
STS
STS
STS
STS
STS
632X.250
632X.375
632X.500
632X.750
632X1.000
6/32
1/4
3/8
1/2
3/4
1
.348
STS
STS
STS
STS
STS
STS
832X.250
832X.375
832X.500
832X.625
832X.750
832X1.000
8/32
1/4
3/8
1/2
5/8
3/4
1
.381
STS 1024X.250
STS 1024X.500
STS 1024X1.000
10/24
1/4
1/2
1
.412
STS
STS
STS
STS
STS
STS
1032X.375
1032X.500
1032X.750
1032X1.000
1032X1.250
1032X1.500
10/32*
3/8
1/2
3/4
1
1-1/4
1-1/2
.412
STS
STS
STS
STS
STS
STS
STS
1420X.250
1420X.500
1420X.625
1420X.750
1420X1.000
1420X1.250
1420X1.500
1/4-20*
1/4
1/2
5/8
3/4
1
1-1/4
1-1/2
.492
Minimum order: 1000.
*Unslotted available in select sizes. Substitute prefix UTS when ordering.
Other standard and metric sizes and lengths available.
120
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Nylon Thumb Screws CONTINUED
OVAL HEAD
.015 R
TYP
.780
5/32"
5/64"
.550
.068
.281 R
TYP
1/4–20
THREAD
Part Number
Size
Length
1420X.375
1420X.500
1420X.625
1420X1.000
1420X1.500
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
.375
.500
.625
1.000
1.500
TSO 1420X1.750
TSO 1420X2.000
TSO 1420X2.500
1/4-20
1/4-20
1/4-20
1.750
2.000
2.500
Part Number
Size
Length
1032X.500FHW
1032X.750FHW
1032X1.000FHW
10/32
.500
.750
1.000
1420X.500FHW
1420X.750FHW
1420X1.000FHW
1/4-20
.500
.750
1.000
51618X.500FHW
51618X.750FHW
51618X1.000FHW
5/16-18
.500
.750
1.000
TSO
TSO
TSO
TSO
TSO
FLAT HEAD WING
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
121
Threaded Rod
Use with corresponding nuts for longer
length or non-standard bolts. Can be bent
with heat to form U-bolts or other shapes.
As well as the materials and sizes shown
here, threaded rod is available in teflon,
polypropylene, delrin, CPVC and Kynar, as
well as some metric sizes. Call us for a
quote.
NYLON
Part No.
Size
TR
TR
TR
TR
TR
4/40N
6/32N
8/32N
10/24N
10/32N
4/40
6/32
8/32
10/24
10/32
TR
TR
TR
TR
TR
1/4-20N
5/16-18N
3/8-16N
1/2-13N
5/8-11N
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1"-8
TR 3/4-10N
TR 7/8-9N
TR 1"-8N
Minimum order 4 feet.
Sold in 4-foot lengths only.
PVC
Part No.
TR 1/4-20P
TR 3/8-16P
TR 1/2-13P
Minimum order 4 feet.
Sold in 4-foot lengths only.
Size
1/4-20
3/8-16
1/2-13
Other sizes available.
FRP (fibreglass-reinforced vinyl ester)
Part No.
TR
TR
TR
TR
TR
3/8-16F
1/2-13F
5/8-11F
3/4-10F
1"-8F
Size
Recomm. Max.
Installation Torque
(ft./lb.)
3/8-16
1/2-13
5/8-11
3/4-10
1"-8
4
8
16
24
50
Sold in 4-foot lengths only. Minimums on request.
Glass-filled polyphenyl sulphide nuts are available.
122
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Threaded Rod CONTINUED
NYLON METRIC
Part No.
TRM
TRM
TRM
TRM
TRM
Size
3X.5
4X.7
5X.8
6X1.0
8X1.25
M3
M4
M5
M6
M8
Minimum order 1 meter.
Sold in 1-meter lengths only.
NYLON STUDS
Chamfered on both ends. These injection moulded
nylon threaded studs are available in many of the most
popular sizes and lengths. They are resistant to most
chemicals, electrically insulating, non-magnetic, lightweight, low thermal conductivity, vibration and abrasion
resistant.
Available in smaller sizes and lengths.
Part No.
TR
TR
TR
TR
TR
Lengths
10/32S
1/4-20S
5/16-18S
3/8-16S
1/2-13S
3/4, 1, 1-1/2, 2, 2-1/2
3/4, 1, 1-1/2, 2, 2-1/2, 3
1, 1-1/2, 2, 2-1/2, 3
1, 1-1/2, 2, 2-1/2, 3, 4
1-1/2, 2, 2-1/2, 3, 4, 5
Minimum order 1000.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
123
Nylon Unthreaded Rod
Part No.
Size
UR
UR
UR
UR
UR
UR
3/8N
1/2N
5/8N
3/4N
7/8N
1"N
3/8
1/2
5/8
3/4
7/8
1
UR
UR
UR
UR
UR
UR
1-1/8N
1-1/4N
1-3/8N
1-1/2N
1-3/4N
2"N
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
Minimum order 8 feet.
Sold in 8-foot lengths only.
Acetal Moulded Dowels
Uses include dowel pins, insulating spacers, stop pins,
switch actuators and keys. Also available in other plastics.
Part No.
OD
Length
Part No.
OD
Length
047125
047250
047375
047500
.047
.047
.047
.047
1/8
1/4
3/8
1/2
187125
187250
187375
187500
187750
.187
.187
.187
.187
.187
1/8
1/4
3/8
1/2
3/4
062125
062250
062375
062500
.062
.062
.062
.062
1/8
1/4
3/8
1/2
093125
093250
093375
093500
.093
.093
.093
.093
1/8
1/4
3/8
1/2
250125
250250
250375
250500
250750
.250
.250
.250
.250
.250
1/8
1/4
3/8
1/2
3/4
125125
125187
125250
125375
125500
.125
.125
.125
.125
.125
1/8
3/16
1/4
3/8
1/2
312125
312250
312375
312500
312625
312750
.312
.312
.312
.312
.312
.312
1/8
1/4
3/8
1/2
5/8
3/4
Minimum order 2500.
Standard colour: Natural.
124
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Nylon Nuts
HEX (single chamfered, washer faced)
Especially useful with brittle surfaces
such as glass, ceramic or enamel. Their
resilience allows even load distribution,
particularly on irregular surfaces.
Part No.
HN
HN
HN
HN
HN
HN
HN
HN
HN
HN
2/56
3/48
4/40
6/32
6/40
8/32
10/24
10/32
1/4-20
1/4-28
F
D
H
.180
.180
.250
.305
.305
.205
.205
.275
.350
.350
.070
.070
.100
.120
.120
.335
.365
.365
.425
.425
.380
.420
.420
.510
.510
.130
.135
.135
.206
.206
.500
.500
.560
.560
.750
.575
.575
.630
.630
.850
.270
.270
.330
.330
.380
.750
.750
.925
.925
1.100
.860
.860
1.050
1.050
1.250
.430
.430
.550
.550
.640
HN 3/4-16
1.100
1.250
.640
HN 7/8-9
HN 1"-8
1.300
1.470
1.480
1.700
.750
.870
HN 5/16-18*
HN 5/16-24
HN 3/8-16*
HN 3/8-24
HN 7/16-14
HN
HN
HN
HN
HN
1/2-13*
1/2-20
5/8-11*
5/8-18
3/4-10
TECHNICAL DATA
Size
4/40
6/32
8/32
10/24
10/32
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
Test No. 1
Tensile Lbs.
Test No. 2
Ultimate Torque
Recommended
Torque Before
Deformation
2 In. Lbs.
5.2 In. Lbs.
6.8 In. Lbs.
7 In. Lbs.
8 In. Lbs.
19.3 In. Lbs.
44.3 In. Lbs.
74 In. Lbs.
15.7 Ft. Lbs.
31.7 Ft. Lbs.
1.5 In. Lbs.
4 In. Lbs.
5 In. Lbs.
5.5 In. Lbs.
6.5 In. Lbs.
17 In. Lbs.
42 In. Lbs.
72 In. Lbs.
13 Ft. Lbs.
30 Ft. Lbs.
85
135
172
211
276
311
877
994
2367
3487
Data listed is for reference purposes only.
Test No. 1 Pull Test — Nylon Nut on Metal Screw
Test No. 2 Torque — Nylon Nut on Metal Screw
All tests performed per ASTM specifications.
Parts moulded in Nylon 6/6 Dupont Zytel 101, dry
as moulded, unmoisturized, at 73°F. Results are
average of random parts tested.
Minimum order 100.
*Available in thinner hex jam nut.
Polycarbonate nuts available in
clear where quantities warrant.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
125
Nylon Nuts CONTINUED
LOCKING HEX
Part No.
F
D
H
LH
LH
LH
LH
4/40
6/32
8/32
10/24
.250
.312
.343
.375
.281
.388
.400
.430
.173
.196
.207
.230
LH
LH
LH
LH
10/32*
1/4-20
5/16-18
3/8-16
.375
.437
.555
.625
.430
.490
.640
.715
.230
.280
.340
.406
LH
LH
LH
LH
3/8-24
7/16-14
1/2-13
1/2-20
.625
.730
.812
.812
.715
.863
.917
.917
.406
.712
.533
.533
Minimum order 100.
*Also available with LH 6/32 body and tapped 10/32. Part no. is LH 6-10/32.
STANDARD JAM
Part No.
F
D
H
9/16
9/16
9/16
9/16
.636
.636
.636
.636
.223
.223
.223
.223
JN 1/2-13
JN 1/2-20
JN 5/8-11
JN 5/8-18
13/16
13/16
1
1
.941
.941
1.129
1.129
.230
.230
.286
.286
JN 3/4-16-1
JN 3/4-16-2
JN 7/8-14-2
JN 7/8-14-3
JN 1"-8
1-1/16
1-1/4
1-1/4
1-1/2
1-1/4
1.202
1.405
1.405
1.712
1.444
.333
.362
.362
.408
.343
JN
JN
JN
JN
3/8-16
3/8-24
7/16-14
7/16-28
Minimum order 1000.
126
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Metric Nylon Nuts
METRIC HEX
Part No.
MH
MH
MH
MH
MH
Pitch
F (mm)
D (mm)
H (mm)
2
2.5
3
3.5
4
.40
.45
.50
.60
.70
3.90
4.90
5.40
6.90
6.90
4.50
5.60
6.20
7.90
7.90
1.2
1.8
2.2
2.7
3.0
MH 5
MH 6
MH 8
MH 10
MH 12
MH 22
.80
1.00
1.25
1.50
1.50
1.50
7.90
9.90
12.90
14.80
18.00
30.00
9.00
11.30
14.75
17.00
20.00
34.00
4.3
5.4
6.4
9.8
6.0
6.0
Minimum order 1000.
Need metric screws?
See page 113.
Machined PVC Hex Nuts
Part No.
VHN
VHN
VHN
VHN
VHN
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
F
D
H
.425
.500
.560
.750
.925
.510
.575
.630
.860
1.050
.200
.270
.330
.430
.550
Minimum order 100.
See page 119 for PVC hex bolts.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
127
Nylon Wing Nuts
STANDARD
Part No.
W
D
H
WN 4/40
WN 6/32
WN 8/32
.900
.900
.900
.400
.400
.400
.480
.480
.480
WN 10/24
WNS 10/24
WN 10/32
WNS 10/32
.900
1.100
.900
1.100
.400
.560
.400
.560
.480
.630
.480
.630
WNS 1/4-20
WN 1/4-20
WNS 1/4-28
WN 1/4-28
1.100
1.380
1.100
1.380
.560
.650
.560
.650
.630
.720
.630
.720
WN 5/16-18
WN 3/8-16
WN 1/2-13
1.380
1.380
1.750
.650
.650
.850
.720
.720
.900
D
H
Minimum order 100.
LOCKING
Part No.
W
LWN
LWN
LWN
LWN
LWN
4/40
6/32
8/32
10/24
10/32
.625
.750
.812
.900
.900
.303
.365
.395
.423
.423
.343
.375
.406
.437
.437
LWN
LWN
LWN
LWN
LWN
LWN
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
1/2-13
.953
.953
1.250
1.250
1.340
1.690
.500
.500
.647
.647
.718
.859
.500
.500
.692
.692
.782
.922
Minimum order 100.
128
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Nylon Cap Nuts
STANDARD
Part No.
CN 4/40
CN 6/32
CN 8/32
CN 10/24
CN 10/32
F
D
H
.250
.305
.330
.365
.365
.275
.350
.385
.420
.420
.280
.345
.375
.400
.400
CN
CN
CN
CN
CN
.425
.500
.560
.750
.925
.510
.575
.630
.860
1.050
.475
.530
.620
.810
1.000
1/4-20*
5/16-18
3/8-16
1/2-13
5/8-11
Minimum order 100.
*No washer face.
LOCKING
Part No.
F
D
H
LCN
LCN
LCN
LCN
LCN
4/40
6/32
8/32
10/24
10/32
.250
.312
.343
.375
.375
.281
.363
.400
.432
.432
.275
.312
.312
.390
.390
LCN
LCN
LCN
LCN
LCN
1/4-20
5/16-18
5/16-24*
3/8-16
3/8-24*
.437
.562
.562
.625
.625
.490
.635
.635
.715
.715
.475
.525
.525
.610
.610
.812
.812
.934
.934
.905
.905
LCN 1/2-13
LCN 1/2-20*
Minimum order 1000.
*Minimum order 5000.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
129
Nylon Thumb Nuts
SLOTTED CAP
Part No.
SN 4/40
SN 6/32
SN 8/32
SN 10/24
SN 10/32
SN 1/4-20
S
.045
.051
.059
.068
.068
.088
D
.317
.348
.381
.412
.412
.492
H
.280
.334
.378
.357
.357
.383
K
D
H
.120
.125
.140
.140
.140
.155
.300
.360
.425
.425
.425
.540
.280
.275
.305
.325
.325
.365
Minimum order 100.
THROUGH
Part No.
TN
TN
TN
TN
TN
TN
4/40
6/32
8/32
10/24
10/32
1/4-20
Minimum order 100.
130
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Nylon Hex Pipe Nuts
These natural nylon nuts are for use where insulation is
desirable, such as plumbing, electrical work, etc.
Fit NPT sizes. Straight thread (available taper thread). Also
see Nylon Locknuts, below.
Part No.
PN
PN
PN
PN
PN
1/8*
1/4
3/8
1/2
3/4
F
D
H
.562
.812
1.000
1.250
1.500
.640
.943
1.130
1.400
1.700
.225
.232
.285
.362
.409
Minimum order 100.
*This size only double chamfered; all others washer faced.
All sizes also available taper tapped (NPT).
Nylon Locknuts
Part No.
Thread Type
& Size
G
H
.265
.265
.265
.265
.265
.281
.748
1.058
1.058
1.312
1.605
1.968
.218
.218
.218
.250
.250
.750
.859
.937
1.062
1.171
.281
.281
.281
.328
.328
1.406
1.812
2.244
2.600
3.060
National Pipe Threads
NLN1/4NPT
NLN3/8NPT
NLN1/2NPT
NLN3/4NPT
NLN1NPT
NLN1-1/4NPT
1/4 NPT
3/8 NPT
1/2 NPT
3/4 NPT
1 NPT
1-1/4 NPT
PG Threads per DIN 40430
NLNPG7
NLNPG9
NLNPG11
NLNPG13.5
NLNPG16
NLNPG21
NLNPG29
NLNPG36
NLNPG42
NLNPG48
PG 7
PG 9
PG 11
PG 13.5
PG 16
PG
PG
PG
PG
PG
21
29
36
42
48
Minimum order 100.
Standard colours: Black or Gray.
Also available in metal and nickel-plated brass.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
131
Nylon Panel Nuts
For use with toggle switch threads. These
are double chamfered, making them ideal for
automatic feed.
Part No.
PLN 15/32-32
PLN 11/16-32
F
D
H
.625
.875
.710
1.015
.120
.162
Minimum order 1000.
Nylon Flange Nuts
Part No.
FLN1/4-20
F
D
H
.425
.740
.255
Minimum order 1000.
Nylon Licence Plate Nut and Bolt Sets
Both washer faced. One size, 1/4-20 x
5/8" long.
Please use part no. LPB 1420x.625 and
LPN 1/4-20 when ordering.
132
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Nylon Expansion Nuts
Used with self-threading metal screws,
these snap-in nuts expand and securely
lock screws and assembled parts in place,
connecting thin-gauge materials and
eliminating cross-threading. They are
corrosion and vibration resistant. Design
variation is available.
Square Head
Square
Hole Size
.275 -.290
.275 -.290
.275 -.290
.275 -.290
.250 -.255
.250 -.270
.350 -.355
.370 -.375
Part No.
XN 1S
XN 2S
XN 4S
XN 8S
XN 10S
XN 1014
XN 22S
XN 30S
Panel
Thickness
.031 -.125
.031 -.125
.031 -.125
.031 -.125
.110 -.125
.062 -.155
.218 -.230
.031 -.100
Screw
Size
8 or 10
8 or 10
8 or 10
8 or 10
6
6
8 or 10
12
H
Head Size
.375
.375
.375
.375
.375
.375
.475
.620
T
Head Height
.031
.062
.125
.250
.031
.032
.062
.080
L
Length
.320
.320
.320
.320
.265
.312
.421
.275
10
8
8
8
.609
.437
.375
.505
.082
.062
.047
.032
.308
.281
.420
.275
8-10
8-10
8
8-10
5/16
.500
.500
.500
.500
.740
.125
.250
.375
.708
.190
.320
.320
.320
.315
.312
6
.485
.055
Double Split Square Head
XN
XN
XN
XN
10DS
19DS
1025
1128
.377
.305
.250
.330
-.382
-.310
-.250
-.330
.125
.125
.093
.031
-.130
-.135
-.275
-.125
.271
.275
.275
.275
.425
-.290
-.290
-.290
-.290
-.429
.031 -.125
.031 -.125
.031 -.156
.031 -.156
.031 -.110
Round Head
XN
XN
XN
XN
XN
4R
8R
38R
72R
220R
Three Legged Square Head (Fits Round Hole)
XN 3300
.300 -.300
.031 -.135
.265
Minimum order 1000 for all parts this page.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
133
Nylon Expansion Nuts CONTINUED
CLOSED BOTTOM
Provides the same advantage as our
standard expansion nuts but with various
head thicknesses and a closed bottom.
This part can also be manufactured in
Supertough Nylon to accommodate a
#10 screw.
C
B
A
Part No.
XN
XN
XN
XN
XN
XN
651
718
773
811
1241
1315
A
Hole Size
.281
.281
.281
.281
.281
.281
Panel
Thickness
.020
.020
.020
.020
.020
.010
-.140
-.140
-.140
-.140
-.140
-.140
Screw
Size
B
Head
Dimension
C
Head
Thickness
Length
6-8
6-8
6-8
6-8
6-8
6-8
.375
.375
.375
.375
.375
.375
.062
.187
.500
.312
.125
.500
.430
.430
.430
.430
.430
.430
Minimum order 1000.
134
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com