HIGH
STRENGTH
FRICTION
GRIP
EN14399-3 HR & HV
8.8 - 10.9
STUDS
DIN.938
DIN.939
5.8 8.8 10.9 12.9
STAINLESS
STEEL
A1
A2
A4
HEXAGON
BOLTS
DIN.931
DIN.933
DIN.960
DIN.961
8.8 10.9 12.9
FOUNDATION
BOLTS
BS.7419
DIN.529/E
4.6 8.8 A2 A4
HEXAGON
NUTS
ALLTHREADS
TIE-RODS
4.6 - 8.8 - 10.9 - 12.9
t 44 (0) 1952 676700
f 44 (0) 1952 676800
e sales@dinstock.com
Certificate No. LRQ 4006330
Full in-house testing on all bolting, nuts and washers to meet with all EU/CE requirements for
pre-load and non pre-load bolt assemblies. Certified to ISO.9001:2008 with Lloyds Registrar and
w www.dinstock.com
in the process of achieving CE Approval.
5 - 8 - 10 - 12
DIN.975
DIN.976
M6 - M100
3/8” - 4”
Units C1, C2, D6 & B3
Hortonwood 10
Telford, Shropshire
UK
TF1 7ES
DIN.934
DIN.439B
BS.1768
BS.1083
WASHERS
BS.4320
DIN.125
EN14399 - 6
DIN.6916 HV
DIN.6917 - 6918
4.6 - 8.8
12.9
NYLOC
NUTS
DIN.985
BS.1768
5 - 8 - 10
Keeping the world from falling apart since 1963…
For over 40 years *DinStock™ has
been at the heart of U.K. Manufacturing,
offering real solutions to a growing
number of sectors and markets, including;
Rail, General Construction, Marine,
Civil Engineering and the Metalworking
Industry
With specialist manufacturing centres
on two sites in Shropshire and the West
Midlands in the heart of England, we
are ideally located with easy access to
motorway arteries, international airports
and sea ports enabling quick & efficient
distribution by road, sea and air, not
only within the U.K., but also throughout
Europe and worldwide.
Our STANDARD production programme consist of the following ranges;
PRE-LOAD FASTENERS:
HIGH STRENGTH FRICTION GRIP HR/HV
With a vast stock
portfolio of standard,
non-preferred and blank
forgings, there is little we
cannot offer on a next
day delivery to almost
anywhere – worldwide!
BS.4395-1 & EN14399-3 HR/HV 8.8 & 10.9
EN14399-6 & EN14399-9 Hardened & DTI Washers
M12 – M36 diameters (1/2” to 1.3/8”)
FOUNDATION BOLTING:
SQUARE SQUARE & HEXAGON
BS.7419 Din.601 4.6, 8.8, A2 & A4
M12 to M64 diameter and up to 1,500mm lengths
HEXAGON BOLTING: NON-PRE LOAD (SB)
Din.931, 933, 960, 961, BS.1768: 4.6, 8.8, 10.9, 12.9, SAE:5 &SAE:8
M6 to M100 diameter
3/8”- 4” diameter
ALLTHREAD RODS: 1M, 2M & 3M LENGTHS
Din.975 4.6, 8.8, 10.9, 12.9, B7 & B8
M6 to M100 diameter
As part of the Jackdaw Group of
TIE-RODS & ENGINEERS STUDS
companies, DinStock™ has the added
Din.938, 939, Double Ended Tie-Rods
4.6, 5.8, 8.8, 10.9, 12.9. A2 & A4
M6 t0 M100 diameter (1/4” – 4”)
ability to offer the range of Industrial
Tooling; Hand Tools, Power Tools, Cutting
Tools, Carbine Tools; PPE products
totalling over 60,000 additional lines. As
a group, we are leading wholesalers and
stockist of top branded industrial power
tool & accessories including Makita, Bosch
Metabo & Stihl Power tools.
Our partnership in Europe with GDPA
fasteners of India, means we are able
to offer their quality assured Forgings,
CERTIFICATION
We understand the importance of correct certification,
traceability and batch testing. Within our ISO:9001 quality
system, we undertake to offer you this on all our manufactured
products including pre-load and non pre-load test certification
for structural fasteners and fixings.
ability to offer smaller lots more rapidly
within Europe in Days, instead of weeks!
gdpa
fasteners
*DinStock™ is the fastening division of Jackdaw Tools Ltd &
Jackdaw Mfg Co Ltd
totalling over 20,000sq.ft and equipped
with the latest automated systems and
computer controlled stocks for over
DISTRIBUTION
Our ability to both manufacture and source the vast range of
fasteners and fixings enables us to offer you a single solution
to fulfil all your requirements.
finished by us in the U.K. Bulk deliveries
are catered for direct from India with the
With modern warehouse facilities
COATING
We are well placed to offer almost any type of surface finish
you could wish for; Galvanized, Electro-Zinc Plated, Dacromet®,
Sheraplex®, Sherardized and many more.
80,000 product lines, we can usually
offer a quotation immediately and advise
you of availability, delivery time and
costs.
...The group strives for the
highest standards of quality, reliability
and customer service. Our word is our
guarantee, our reputation, and yours, is
literally built on what we do!...
Our well equipped machine centre
caters for most types of manufacturing
Robert Pearson Managing Director DinStock Ltd, Jackdaw Tools Group.
processes including Landis Thread
Cutting machines, Fette Rolling, CNC
Lathes and Ward Capstans for small
SERVICE
We pride ourselves on being efficient and reliable when it comes
to delivery times. Our reputation has been built on our ‘promise’
to deliver on-time, every time and with a quality that is assured,
proven and tested!
precision turning and batch work.
We have no minimum order quantity and no
minimum order value
APPROVED
Full In-House testing on all bolting, nuts and washes to meet with all EU / CE requirements for
pre-load and non pre-load bolt assemblies.
Certified to ISO.9001:2008 with Lloyds Registrar and in the process of achieving CE approval.
Keeping the world from falling apart since 1963…
For over 40 years *DinStock™ has
been at the heart of U.K. Manufacturing,
offering real solutions to a growing
number of sectors and markets, including;
Rail, General Construction, Marine,
Civil Engineering and the Metalworking
Industry
With specialist manufacturing centres
on two sites in Shropshire and the West
Midlands in the heart of England, we
are ideally located with easy access to
motorway arteries, international airports
and sea ports enabling quick & efficient
distribution by road, sea and air, not
only within the U.K., but also throughout
Europe and worldwide.
Our STANDARD production programme consist of the following ranges;
PRE-LOAD FASTENERS:
HIGH STRENGTH FRICTION GRIP HR/HV
With a vast stock
portfolio of standard,
non-preferred and blank
forgings, there is little we
cannot offer on a next
day delivery to almost
anywhere – worldwide!
BS.4395-1 & EN14399-3 HR/HV 8.8 & 10.9
EN14399-6 & EN14399-9 Hardened & DTI Washers
M12 – M36 diameters (1/2” to 1.3/8”)
FOUNDATION BOLTING:
SQUARE SQUARE & HEXAGON
BS.7419 Din.601 4.6, 8.8, A2 & A4
M12 to M64 diameter and up to 1,500mm lengths
HEXAGON BOLTING: NON-PRE LOAD (SB)
Din.931, 933, 960, 961, BS.1768: 4.6, 8.8, 10.9, 12.9, SAE:5 &SAE:8
M6 to M100 diameter
3/8”- 4” diameter
ALLTHREAD RODS: 1M, 2M & 3M LENGTHS
Din.975 4.6, 8.8, 10.9, 12.9, B7 & B8
M6 to M100 diameter
As part of the Jackdaw Group of
TIE-RODS & ENGINEERS STUDS
companies, DinStock™ has the added
Din.938, 939, Double Ended Tie-Rods
4.6, 5.8, 8.8, 10.9, 12.9. A2 & A4
M6 t0 M100 diameter (1/4” – 4”)
ability to offer the range of Industrial
Tooling; Hand Tools, Power Tools, Cutting
Tools, Carbine Tools; PPE products
totalling over 60,000 additional lines. As
a group, we are leading wholesalers and
stockist of top branded industrial power
tool & accessories including Makita, Bosch
Metabo & Stihl Power tools.
Our partnership in Europe with GDPA
fasteners of India, means we are able
to offer their quality assured Forgings,
CERTIFICATION
We understand the importance of correct certification,
traceability and batch testing. Within our ISO:9001 quality
system, we undertake to offer you this on all our manufactured
products including pre-load and non pre-load test certification
for structural fasteners and fixings.
ability to offer smaller lots more rapidly
within Europe in Days, instead of weeks!
gdpa
fasteners
*DinStock™ is the fastening division of Jackdaw Tools Ltd &
Jackdaw Mfg Co Ltd
totalling over 20,000sq.ft and equipped
with the latest automated systems and
computer controlled stocks for over
DISTRIBUTION
Our ability to both manufacture and source the vast range of
fasteners and fixings enables us to offer you a single solution
to fulfil all your requirements.
finished by us in the U.K. Bulk deliveries
are catered for direct from India with the
With modern warehouse facilities
COATING
We are well placed to offer almost any type of surface finish
you could wish for; Galvanized, Electro-Zinc Plated, Dacromet®,
Sheraplex®, Sherardized and many more.
80,000 product lines, we can usually
offer a quotation immediately and advise
you of availability, delivery time and
costs.
...The group strives for the
highest standards of quality, reliability
and customer service. Our word is our
guarantee, our reputation, and yours, is
literally built on what we do!...
Our well equipped machine centre
caters for most types of manufacturing
Robert Pearson Managing Director DinStock Ltd, Jackdaw Tools Group.
processes including Landis Thread
Cutting machines, Fette Rolling, CNC
Lathes and Ward Capstans for small
SERVICE
We pride ourselves on being efficient and reliable when it comes
to delivery times. Our reputation has been built on our ‘promise’
to deliver on-time, every time and with a quality that is assured,
proven and tested!
precision turning and batch work.
We have no minimum order quantity and no
minimum order value
APPROVED
Full In-House testing on all bolting, nuts and washes to meet with all EU / CE requirements for
pre-load and non pre-load bolt assemblies.
Certified to ISO.9001:2008 with Lloyds Registrar and in the process of achieving CE approval.
HIGH
STRENGTH
FRICTION
GRIP
EN14399-3 HR & HV
8.8 - 10.9
STUDS
DIN.938
DIN.939
5.8 8.8 10.9 12.9
STAINLESS
STEEL
A1
A2
A4
HEXAGON
BOLTS
DIN.931
DIN.933
DIN.960
DIN.961
8.8 10.9 12.9
FOUNDATION
BOLTS
BS.7419
DIN.529/E
4.6 8.8 A2 A4
HEXAGON
NUTS
ALLTHREADS
TIE-RODS
4.6 - 8.8 - 10.9 - 12.9
t 44 (0) 1952 676700
f 44 (0) 1952 676800
e sales@dinstock.com
Certificate No. LRQ 4006330
Full in-house testing on all bolting, nuts and washers to meet with all EU/CE requirements for
pre-load and non pre-load bolt assemblies. Certified to ISO.9001:2008 with Lloyds Registrar and
w www.dinstock.com
in the process of achieving CE Approval.
5 - 8 - 10 - 12
DIN.975
DIN.976
M6 - M100
3/8” - 4”
Units C1, C2, D6 & B3
Hortonwood 10
Telford, Shropshire
UK
TF1 7ES
DIN.934
DIN.439B
BS.1768
BS.1083
WASHERS
BS.4320
DIN.125
EN14399 - 6
DIN.6916 HV
DIN.6917 - 6918
4.6 - 8.8
12.9
NYLOC
NUTS
DIN.985
BS.1768
5 - 8 - 10