Storage required
User / Installation manual
FULL-2WAY
LCD Appellation Touch Switch
WRT 9261-8
This manual is targeted to the following user.
The engineers installing this product and setting the system
● The operators and managers of this product and the system
●
●Microsoft, Office, and Excel are either registered trademarks or trademarks of Microsoft Corporation
in the United States, Japan and/or other countries.
●Microsoft product screen shots reprinted with permission from Microsoft Corporation.
Thank you for purchasing our products.
This unit must be used with the knowledge of FULL-2WAY Remote Lighting
Control System.
Please read the technical manual or the catalog of FULL-2WAY Remote Lighting
Control System.
● Please read this manual carefully, and use this product correctly and safely.
● Please read ” Safety Precautions ” before using.
● After installation and setting, please give this manual to the operator or manager.
1048,Kadoma,Osaka 571-8686,Japan
ⓒ Panasonic Electric Works Co., Ltd. 2010
8A3 971 0000 1
To the installer
DC 0110−0 PEW
Table of Contents
Safety Precautions / Usage Notes ……………………………………………………… 4
Installation
Wiring Diagram and Cautions for Installations ……………………………… 5
Brightness setting You can adjust the brightness of the screen light. …………………………… 24
Character position setting You can select the position of characters for switch name. ………… 25
Setting Link control
Names and Functions ………………………………………………………………… 6
Setting Screen locking You can make the switch not to operate from the external switches. ……… 26
Mounting …………………………………………………………………………………… 7
Display setting You can set each page displayed or undisplayed from the external switches. ……… 27
Auto-off setting You can set the auto-off. ………………………………………………… 28
Functions and Features ………………………………………………………………… 8 - 9
Type of Settings…………………………………………………………………………… 10 - 11
Settings ……………………………………………………………………………………………… 12
Address Setting
For each switch, Individual（0-1 - 63-4）, Group（1-127）, Pattern（1-72）,
Dimmer（1-16）can be set.
Read / Write setting data with SD Memory Card
You can write the setting data to SD Memor y Card.
You can read the setting data from SD Memor y Card.
Shut down the system before inserting or removing SD Memory Card ………………… 30
（Individual Switch）Individual …………………………………………………………… 13
How to insert or remove SD Memory Card ……………………………………………… 31
（Pattern / Group Switch）Pattern
……………………………………………………… 14
How to write the setting data to SD Memory Card ……………………………………… 32
（Pattern / Group Switch）Group ………………………………………………………… 15
How to read the setting data from SD Memory Card …………………………………… 33
（Dimmer Switch）Dimmer（Individual）…………………………………………………… 16
File format of reading and writing
（Dimmer Switch）Dimmer（Group）……………………………………………………… 17
How to edit the setting data written to SD Memory Card ……………………………… 35
（Dimmer Switch）Dimmer
The setting data that can be read and written（Factory default settings） ………… 36 - 37
Setting Switch Name
Setting Page Name
……………………………………………………………… 17
You can set the name of each switch.
You can set the name of each page.
………………………………… 18
…………………………………… 19
…………………………………………………… 34
System
Setting Dialog box Dialog box is displayed when operating in the normal screen.
The operational error can be prevented.
……………………………… 38
How to change the password You can arbitrarily change the password. …………………… 39
Setting Switch Type
How to merge switches You can make the big size switch. ……………………………… 20
Maintenance
How to divide a switch You can return the merged switch to default switches. …………… 21
Initialization You can initialize the settings.(Factory default settings) …………………………… 40
Setting switch color You can set the switch color "Yellow","Blue",and "Default Color". ……… 21
Screen adjustment You can adjust the touching point when it is not pointing properly. …………… 40
CLEAN mode / Cleaning Instructions
Setting Sound and Screen
Beep setting　You can set OFF / ON of Beep. ……………………………………………… 22
Screen setting　You can specify the page displayed when returning to the normal
CLEAN mode When you clean the screen, you can lock the screen temporarily. ………………… 41
Cleaning Instructions …………………………………………………………………… 41
……………………………………………… 23
Troubleshooting ………………………………………………………………………………… 42
Coloration setting　You can select in three colors, "White","Silver Gray", and "Dark Brown". ……… 24
Ratings and Specifications ………………………………………………………………… 43
screen from various states.
2
Setting State indication You can display states of loads in the switch by characters.……………… 29
3
Safety Precautions
Wiring Diagram and Cautions for Installations
WARNING
Mandatory
●All screws should be tightened firmly.
Loose screws may cause damage or fire.
［Recommended tightening torque: 0.5 N · m - 1.0 N · m］
●Do not attempt to take apart, repair or modify this product
under any circumstances.
Prohibited
CAUTION
●Do not install outdoors or in moistured areas.
This may cause smoking, fire or malfunctions.
Prohibited
●Do not touch the terminals while power is on.
This may cause electrical shock.
Usage Notes
●Please operate this device by finger.
Please do not operate this device with sharp or hard objects.
This may cause malfunctions.
●Please do not press two or more switches at the same time.
This may cause malfunctions.
●Read / Write setting data requires an SD Memory Card [optional].
Maximum SD Memory Card size : 4GB
4
Power
source
WRT4124-8 etc.
（6A Contact Output T/U）
Load
L
FULL-2WAY signal line
Power
source
WRT2050 series etc.
（Transmission Unit）
24 V AC line
Power
source
24 V
AC line
WR2301-811 etc.
Remote Control
Transformer: Not for U.S.A
WRT9261-8
■ Not for U.S.A (WR2301-811 etc. in use)
24 V AC line Maximum wiring length
φ1.2 mm - φ1.6 mm、1.25 mm2 - 2.0 mm2
φ0.9 mm、0.75 mm
2
WRT9261-8
WRT5554-8 etc.
（Switches）
■ For U.S.A
24 V AC line Maximum wiring length
100 m
50 m
※ Maximum of 7 LCD Appellation Touch Switches can
be connected per 1 Remote Control Transformer.
※ When maximum wiring length of 500m is necessary,
1 LCD Appellation Touch Switch can be connected
per 1 Remote Control Transformer.
2
2
(φ1.2 mm - φ1.6 mm,1.25 mm - 2.0 mm in use)
φ1.2 mm - φ1.6 mm、1.25 mm2 - 2.0 mm2
φ0.9 mm、0.75 mm
2
100 m
50 m
※ Maximum of 5 LCD Appellation Touch Switches can
be connected per 1 transformer.
※ Please use the transformer rated at 24 V, and more
than 36 VA.
※ When maximum wiring length of 500m is necessary,
1 LCD Appellation Touch Switch can be connected
per 1 transformer.
2
2
(φ1.2 mm - φ1.6 mm,1.25 mm - 2.0 mm in use)
Cautions for Installation
●Please do not connect power supply wires to the signal terminals.
This may cause malfunctions.
●Please do not connect with different wire gauges to any terminals.
This may not work properly due to poor connections.
●Please do not over tighten screws.
This may cause deformation or damage of unit.［Recommended tightening torque 0.4 N · m］
●Please do not connect while the system power is on.
This may cause malfunctions.
●The use of power tools and power drivers may damage the connector block.
This may cause malfunctions.
●When LCD Touch Panel Block is removed from Power Block for a long time,
please re-attach the dust cover to Power Block.
Dust damages this product and cause malfunctions.
5
Names and Functions
Separated Blocks
Mounting
In the packaging,"Power Block" and
"LCD Touch Panel Block" are separated.
Power Block
[mm]
LCD Touch Panel Block
Box Screws
97＋50
90＋50
Setting Button
The connector in the Power Block has a
"Dust cover" installed.
When installing the LCD Touch Panel
Block, please remove.
Back Side
（Power Block）
Opening of
Mounting Box
Power Block
LCD Touch Panel Block
Plate
（WTC9222-8 etc.）
[Optional]
（LCD Touch Panel Block）
Signal terminals
●Connect FULL-2WAY
signal
24 V AC terminals
●Connect 24 V AC
power supply
SD Memory Card Slot
6
●The setting data can be
backed up and edited with
SD Memory Card [Optional].
7
Functions and Features
Address setting: Up to 24 Individual , Group and Pattern switches can be set in total.
Up to 6 Dimmer switches can be set in total.
The names of each switch can be displayed.
When you want to control ON/OFF only, "Easy setting" is recommended.
Up to 3
tabs can be used.
Meeting
Room 2
Sales
Division 2
Legal
Division
Reference
Room
Accounting
Division
All lights
OFF
3F
Sales
Division 1
2F
Position Indicator (Green)
●Even when the screen
has been turned off in
the dark, the switch can
be located.
Meeting
Room 1
1F
You can operate switches
by touching the screen.
The main screen switch operation (Easy setting)
I n iti a l sc re e n
●Please set the switch address.
Status (Green)
●When "Individual","Group" is
off or "Pattern" does not match.
Status (Red)
●When "Individual","Group" is
on or "Pattern" is matching.
※Blinks while in timer mode.
Setting Button
●It shifts to "SETTING mode" and "CLEAN mode".
You can select the color of the screen.
The coloration can be set to "White" , "Silver Gray" or "Dark Brown".
(Brightness can be adjusted.)
Addressing setting
Easy setting
●The switch shape appears when the
switch address is set.
●Maximum of eight switches can be
set per page.
You can display the various size switches on the screen.(Detailed setting)
●You can make a dimmer swich with standard switches.
●Various size switches are available.
Detailed
setting
Dimmer switches
●You can display the state of loads with
characters.
●When the switch name has been input,
the name is displayed on the switch.
Meeting
Room 1
Sales
Division 1
●When the page name is input,
the name is displayed on the tab.
Meeting
Room 2
Sales
Division 2
Legal
Division
Reference
Room
Accounting
Division
All lights
OFF
3F
3F
State indication
Tab
Easy setting
2F
●You can set various size switches.
Page name / Switch name setting
1F
Switch size
2F
All lights
OFF
ON
ON
Pattern
8
OFF
Meeting
Room
Reference
Room
1F
Sales
Division
●You can set Dimmer switches that is
operated easily and see the dimmer level.
9
Type of Settings
Please select " Easy setting" or "Detailed setting".
" Easy setting" is included in "Detailed setting".
Please select, according to situations.
Easy setting
Easy setting
Back
End
End
Only Address, Switch name
and Page name can be set.
（P.13 - P.19）
Page 1
Page 2
Page 3
Page 1
Page 1
Set the address of the switch.
（P.13 - P.17）
Individual
※Address No.0-1 - 63-4
can be set.
Pattern
※Address No.1 - 72
can be set.
Group
※Address No.1 - 127
can be set.
Dimmer（Individual）
※Address No.0-1 - 63-4
can be set.
Dimmer（Group）
※Address No.1 - 127
can be set.
Dimmer
※Address No.1 - 16
can be set.
Back
Please select the button.
Switch Type
Page name
Switch name
Sound
Screen
System
Page 2
Page 3
Page 2
Page 3
Easy
setting
Switch name
Set the switch name.
（P.18）
Setting
Switch name
Page name
Set the page name.
（P.19）
Setting
Page name
Detailed
setting
Switch Type
Set the switch design.
（P.20 - P.21）
How to
merge switches
How to
divide the switch
Setting
Switch Color
Sound
Screen
Set the sound and screen.
（P.22 - P.29）
Beep Setting
Screen Setting
Coloration Setting
Brightness Setting
Setting
Character position
Setting
Link control
Setting
Screen locking
Display Setting
Auto-off Setting
10
End
Address
Switch name
Address
Address
Detailed setting
Page name
Setting
State indication
Detailed setting
You can set all contents.
System
Read / Write setting data with
SD Memory Card [Optional],
Maintenance.（P.30 - P.40）
How to insert or remove
SD Memory Card
How to write the
setting data
How to read
the setting data
File format of reading
and writing
How to edit the
setting data written
Setting data can be
read and written
Setting Dialog box
How to change
the password
Maintenance
Initialization
Screen adjustment
11
Settings（Steps to "SETTING mode"）
Address Setting / Individual Switch
You can set variously in "SETTING mode".When you begin setting or change the settings,
please change the screen to "SETTING mode".
Steps to the Address Setting / Individual Switch
Steps to "SETTING mode"
Back
Back
Sales
Division 2
Legal
Division
Reference
Room
Accounting
Division
All lights
OFF
Please select the button.
SETTING
mode
CLEAN mode
1
2
3
4
5
6
7
8
9
0
Setting Button
Press "SETTING mode".
1
SETTINGS
Please select the button.
Easy
setting
（ Please read
Type of Settings : P.10 - P.11
How to Settings : P.13 - P.40
Detailed
setting
Detailed
setting
Address
Enter Password
Select Page
Individual
① Enter your password (4 digits).
② Press "OK".
Example: Set " Individual 0-1" to " Switch 1 ".
Address
Back
Switch 1
Address :
End
Address Unset
Switch 2
Switch 6
Address Unset
Address Unset
Switch 3
Switch 7
Ind.
Ind. Dim.
P
Address Unset
Switch 4
Esc
G
1
Switch 8
Address Unset
Address Unset
0-1
Clear
-
Set
1
2
3
4
5
46
7
8
9
0
5
※ If you change the function,
the address that has already
been entered is cleared.
※ If you want to change the
address that has already
been entered, press "Clear"
and enter address.
−
2
Press the switch you want to set.
）
① Press "Ind".
② Press Load Channel "0".
③ Press "-".
④ Press Load Number "1".
OK
Timer
Switch 5
Address Unset
Address Unset
End
Select Page
Address No.0-1 ~
- 63-4
63-4 can
can be
be set.
set.
※ Initial password is "0123".
To change to your password,
please read P.39.
Press "Setting Button".
SETTING
mode
Address
Easy setting
2
＊＊＊＊ Clear
3F
Meeting
Room 2
Setting
Button
OK
Please enter the password.
2F
Sales
Division 1
1F
Meeting
Room 1
Easy setting
Detailed setting
3
When you do not set the timer ...
When you set the timer ...
5 Press "OK".
※Settings are saved.
Address：
Returning to the normal screen
Easy setting
Back
Ind.
Ind. Dim.
End
Page 3
Page 2
Page 3
P
Switch name
Page 1
Meeting
Room 1
Address
Page 1
Page 2
Page 3
Back
End
Switch Type
Page name
Sound Screen
System
Press "End" .
Yes
No
Press "Yes" .
Meeting
Room 2
Sales
Division 2
Legal
Division
Reference
Room
Accounting
Division
All lights
OFF
Returned to the normal screen.
※ In "SETTING mode" the screen is returned to the normal screen without any operation in 10 minutes.
In this case, only settings you pressed "Yes" can be saved.
12
3F
Address
Switch name
Quit setting and
return to the normal mode?
2F
Detailed setting
Sales
Division 1
1F
Page 2
Switch Timer
OK
Timer
Page name
Page 1
Esc
G
0-1
Clear
-
Set
1
2
3
4
5
6
7
8
9
0
Press "Set".
Esc
Address：
Sel.
Without Timer
OFF-Delay
1
ON-Timer
−
1
2
30sec
1min
5min
30sec
1min
5min
1hr
2hr
Select the timer.
Press "Sel.".
※Settings will not be saved
at this time.
2
Ind.
Ind. Dim.
P
1
G
Esc
OK
Set
0-1
Clear
Clear
ON-Timer
5min
1
2
3
4
5
6
7
8
9
0
−
Press "OK".
The timer you selected
is displayed.
Please exit by pressing "End", and follow the instructions on the screen.
The programmed switch will be displayed.
13
Address Setting / Pattern / Group Switch
※Please set Pattern / Group Control data with Wireless
Programming Unit（WRT9600-8[Optional]）etc.
Steps to the Address Setting / Pattern / Group Switch
Setting
Button
SETTING
mode
Select Page
Detailed
setting
Address
Group
Enter Password
Select Page
Example: Set "Group 1" to "Switch 7".
Address
Back
Switch 1
Switch 5
Switch 2
Switch 6
Ind.0-1
Address No.1No.P1-72P72
cancan
be be
set.set.
Pattern
G
Ind. Dim.
Switch 7
Ind.0-3
Address Unset
Switch 4
Switch 8
Ind.0-4
Esc
P
G
P1
1
Clear
-
Set
1
2
3
4
5
2
6
7
8
19
0
Back
Switch 5
Switch 2
Switch 6
Ind.0-1
Ind.0-2
Switch 3
Ind.0-3
Switch 4
Ind.0-4
End
Address：
P
Ind.1-1
Ind.1-2
Switch 7
Address Unset
Switch 8
Address Unset
Press the switch you want to set.
Ind. Dim.
P
G
1
Esc
※ If you change the function,
the address that has already
been entered is cleared.
※ If you want to change the
address that has already
been entered, press
"Clear" and enter address.
3 Press "OK".
※Settings are saved.
3
1
Clear
1
2
3
4
5
26
7
8
9
0
① Press "G".
② Press "1".
When you do not set the timer ...
OK
① Press "P".
② Press "1".
③ Press "OK".
※ If you change the function,
the address that has already
been entered is cleared.
※ If you want to change the address
that has already been
entered, press "Clear" and
enter address.
Address：
Esc
Switch Timer
OK
Timer
G
Ind. Dim.
P
G
1
1
Clear
2
5
6
9
0
-
3
7
OFF-Delay
4
ON-Timer
8
Please exit by pressing "End", and follow the instructions on the screen.
The programmed switch will be displayed.
Sel.
2
30sec
1min
5min
30sec
1min
5min
1hr
2hr
1
1 Select the timer.
2 Press "Sel.".
Press "Set".
Address：
G
The timer you selected
is displayed.
Esc
Without Timer
Set
Ind. Dim.
P
14
3
Press the switch you want to set.
When you set the timer ...
Switch 1
OK
Timer
Ind.1-2
Switch 3
Example: Set "Pattern 1" to "Switch 8".
Address：
End
Ind.1-1
Ind.0-2
Address
Detailed setting
Address No. 1-127 can be set.
Address
Easy setting
Easy setting
G
Esc
OK
Set
1
Clear
Timer
ON-Timer
5min
1
2
3
4
5
6
7
8
9
0
※Settings will not be saved
at this time.
Press "OK".
15
making the Dimmer Switch
Address Setting / Dimmer Switch ※After
please set the address.
Setting
Button
SETTING
mode
Dimmer（Group）
Address
Select Page
Enter Password
Detailed
setting
Detailed setting
Address No.1-127 can be set.
Steps to the Address Setting / Dimmer Switch
Easy setting
Easy setting
shape（refer to P.20）,
Address
Select Page
Example: Set " Group 1" to the switch.
For dimming :
G
The step is similar to that of
P.16 except for setting "G",
in address setting.
Address No.0-1-63-4 can be set.
Ind. Dim.
G
Dimmer（Individual）
Example: Set " Individual 6-1" to the switch.
(For Dimming, For ON / OFF)
Address
For Dimming
Address Unset
For ON / OFF
Address Unset
Switch1
Back
For dimming :
End
Switch 5
Ind. 1-1
Ind.
Switch 6
Ind. 1-2
Esc
6−1
Clear
1
2
3
5
6
7
9
0
Ind. Dim.
Switch 7
1
G1
G
Switch 8
4
P1
For Dimming
Ind. 6-1
For ON / OFF
Address Unset
Switch1
Back
2
3
For ON / OFF :
End
Ind.
Switch 6
Ind. Dim.
Ind. 1-2
G1
Switch 8
P1
Esc
OK
Timer
Switch 5
Ind. 1-1
Switch 7
8
1
G
6−1
Clear
-
Set
1
2
3
4
5
6
7
8
4
9
0
−
2
Press the switch you want
to set（For ON / OFF）.
3
※ If you change the function,
the address that has already
been entered is cleared.
※ If you want to change the
address that has already been
entered, press "Clear" and
enter address.
① Press "Ind".
② Press Load Channel "6".
③ Press "-".
④ Press Load Number "1".
※ If you change the function,
the address that has already
been entered is cleared.
※ If you want to change the
address that has already been
entered, press "Clear" and
enter address.
When you set the timer ...
When you do not set the timer ...
5 Press "OK".
※ Settings are saved.
16
OK
3
1
Clear
1
2
3
4
5
6
7
8
9
0
2
−
Address No. 1-16 can be set.
Dimmer
OK
−
Press the switch you want
to set（For Dimming）.
Address
① Press "Ind".
② Press Load Channel "6".
5 ③ Press "-".
④ Press Load Number "1".
4
⑤ Press "OK".
1
Esc
Example: Set " Dimmer 16 " to the switch.
For dimming :
The step is similar to that of
P.16 except for setting "Dim",
in address setting.
For ON / OFF :
Esc
OK
Ind. Dim.
G
6−1
Clear
1
2
3
4
5
6
7
8
9
0
Press "Set".
Clear
Ind. Dim.
1
2
3
4
5
6
7
8
9
0
3
−
G
Esc
OFF-Delay
ON-Timer
30sec
30sec
1hr
−
1
2
1
4
16
2
1min
5min
1min
5min
2
For ON / OFF :
Sel.
Without Timer
なし
Set
-
OK
Dim.
1
Switch Timer
Timer
Ind.
Esc
2hr
Select the timer.
Press "Sel.".
※Settings will not be saved
at this time.
Esc
OK
Timer
Ind.
Ind. Dim.
G
OFF-Delay
30sec
6−1
Clear
1
2
3
4
5
6
7
8
9
0
Set
−
Press "OK".
The timer you
selected is
displayed.
Please exit by pressing "End", and follow the instructions on the screen.
The programmed switch will be displayed.
17
Setting Switch Name
Easy setting
Detailed setting
Setting Page Name
Steps to the Setting Switch Name
Setting
Button
SETTING
mode
Steps to the Setting Page Name
Switch Name
Select Page
Enter Password
Detailed
setting
Name of Switch
Back
Switch
name
Name of Switch
End
Select Page
Esc
Switch5
（Unset）
EXIT
Switch2
（Unset）
Switch6
（Unset）
ABC
Switch3
（Unset）
Switch7
（Unset）
MNO PQRS TUV WXYZ
Switch4
（Unset）
Switch8
（Unset）
JKL
ABC
Clr
GHI
JKL
Clr
1
-
. @ Char CR
Detailed
setting
Page
name
Select Page
Tab
OK
MNO PQRS TUV WXYZ
① Enter the name.
② Press "OK".
Press the switch you want to set.
Esc
2
DEF
Select Page
Enter Password
1F
1
-
SETTING
mode
Name of Page
OK
2
GHI
Setting
Button
Page Name
Easy setting
Indication of
会議室1
●
営業部1
tab characters
会議室2
営業部2
総務部
資料室
経理部
1F全消灯
AB
Switch1
（Unset）
DEF
Detailed setting
Up to 10 characters can be displayed for tab of each page.
For example, " 1F "," 2F ", and " 3F " etc..
etc.
Up to 20 characters can be displayed for each switch. For example, " EXIT ".
Easy setting
Easy setting
. @ Char CR
① Enter the name.
② Press "OK".
How to input character
How to input character
※If you want to change characters that has already been entered,
please enter again after pressing "Clr.".
DEF
DEF
①　→E
Name of Switch
WXYZ WXYZ
②　→X
GHI
GHI
GHI
③　EXIT
→I
ABC
DEF
-
How to change the input mode
Name of Switch
Esc
OK
EXIT
DEF
GHI
JKL
Press "Char.".
18
Clr
. @ Char CR
. @ Char CR
Name of Switch
Name of Switch
EXIT
EXIT
Esc
OK
×Close
ABC
Clr
MNO PQRS TUV WXYZ
-
JKL
Please exit by pressing "End", and follow the instructions on the screen.
The programmed switch will be displayed.
OK
MNO PQRS TUV WXYZ
TUV
④　→T
ABC
GHI
Esc
AaBb
Sign
1234
Select the input mode.
DEF
GHI
JKL
Clr
MNO PQRS TUV WXYZ
-
. @ Char CR
It changes into the input mode
you selected.
19
Setting Switch Type
Detailed setting
Steps to the Setting Switch Type
Setting
Button
SETTING
mode
Detailed
setting
Enter Password
Switch Type
You can make a large switch by merging two or more switches.
You can make a Dimmer Switch by selecting "Dim." in Switch Type.
Select Page
How to divide a switch
How to merge switches
You can return the merged switch to default switches.
The following are procedures for returning Dimmer Switch to
default switches.
Example: Merge "Switch1" - "Switch4".
Type of Switch
1
1
1
1
Esc
OK
Switch1
Switch5
Div
Switch2
Switch6
Mer
Switch3
Switch7
Dim.
Switch4
Switch8
Color
Type of Switch
The information of the left upper
switch becomes prior
after switches merged.
Do they need to merge?
2
① Select switches you
YES
Switch6
Mer
Switch7
Dim.
Switch8
Color
NO
Press "OK".
Esc
OK
Switch5
Switch2
Switch6
Mer
Switch3
Switch7
Dim.
Switch4
Switch8
Color
Type of Switch
Esc
Div
Possible
to merge
OK
Type of Switch
Esc
Div
Switch1
Switch5
OK
Mer
Switch2
Switch6
Mer
Switch7
Dim.
Switch3
Switch7
Dim.
Switch8
Switch8
Color
Switch4
Switch8
Color
Type of Switch
Esc
1
1
1
1
Esc
Switch5
Div
Switch2
Switch6
Mer
Switch3
Switch7
Dim.
Switch4
Switch8
Color
Impossible
to merge
Switch8
Mer
Switch7
Switch7
Dim.
Switch8
Switch8
Color
2
① Select four switches in
the vertical direction.
② Press "Dim".
Press "Yes".
NO
Switch1
Color
2
3
Esc
Switch1
Switch5
OK
Div
Switch6
Mer
Switch2
Switch6
Mer
Switch7
Dim.
Switch3
Switch7
Dim.
Switch8
Color
Switch4
Switch8
Color
4
Press "OK".
③ Select the switch you
want to divide.
④ Press "Div".
※Contents set to "Switch1"
are copied to "Switch2""Switch4".
Setting Switch Color
You can set the switch color.
You can select colors from "Yellow", "Blue", and "Default Color".
Type of Switch
Switch1
Esc
OK
Type of Switch
Esc
OK
OK
Switch1
Switch5
Div
Switch1
Switch5
Div
Switch5
Div
Switch2
Switch6
Mer
Switch2
Switch6
Mer
Switch6
Mer
Switch3
Switch7
Dim.
Switch3
Switch7
Dim.
Switch7
No Dim
Switch4
Switch8
Color
Switch4
Switch8
Color
Switch8
Color
Esc
Press "OK".
Please exit by pressing "End", and follow the instructions
20
Switch8
Type of Switch
Div
※ "Default" changes by coloration setting (P.24).
The information of the left upper
switch becomes prior
after switches merged.
Do they need to merge?
YES
No Dim
OK
OK
Type of Switch
OK
Switch1
Mer
Switch7
Esc
Switch5
Div
Switch6
Div
Make a Dimmer Switch.
Type of Switch
Type of Switch
OK
① Select Dimmer Switch.
② Press "No Dim".
Div
Switch7
Esc
Switch1
1
Example
Switch1
Type of Switch
Switch5
※ It is impossible to merge switches to shape that is not a rectangle.
Type of Switch
Example: Divide a Dimmer Switch into "Switch1" - "Switch4".
OK
Div
Switch1
Press "Yes".
want to merge.
② Press "Mer".
Esc
Switch5
Press the switch you want to
change color.
※ You can also set for two or more switches
at the same time.
① "Yellow","Blue", and
2
1
"Default Color" are displayed
sequentially whenever you push
"Color" and please select the color
you want.
② Press "OK".
on the screen. The programmed switch will be displayed.
21
Setting Sound and Screen
Detailed setting
Steps to the Setting Sound and Screen
Setting
Button
SETTING
mode
Detailed
setting
Enter Password
You can specify the page displayed in the normal screen
in following situations.
・After turning on Power
・After the screen has recovered from auto-off.
・When changing to the normal screen from "SETTING mode" or
"CLEAN mode"
Sound
Screen
You can set OFF/ON of Beep.
Screen setting
Beep setting
Start Screen
Sound and Screen
Back
End
Beep
Screen
Coloration
Brightness
Character
position
Link
control
Beep
Esc
When you selected
"Invalid" in Display
setting (P.27)
OK
Press "Beep".
State
indication
① Select"OFF" or "ON".
② Press "OK".
2
1
"Former screen" is the
1 Select the page you want.
screen displayed before
the screen light was turned
2 Press "OK".
off automatically.
ON
1
Page 3
OK
Page 2
Former
screen
2
OFF
Auto-off
Esc
Page 1
Sound and Screen
Back
End
Beep
Screen
Coloration
Brightness
Character
position
Link control
Auto-off
After pressed
① or ② .
State
Indication
Press "Screen".
Start Screen
When you selected
"Effective" in Display
setting (P.27)
Esc
OK
3
The address set on screen ON
Former
Chg
screen
The address set on screen OFF
Former
Chg
screen
1
2
①② Press "Chg".
③ Press "OK".
Please exit by pressing "End", and follow
22
the instructions on the screen.
23
Setting Sound and Screen
Steps to the
Setting Sound
and Screen
Setting
Button
SETTING
mode
Sound
Screen
Detailed
setting
Enter Password
Detailed setting
You can match the switch and the surrounding installed by setting
the coloration of the screen background, and the brightness
of the screen.
You can select the position of characters for switch name.
Coloration setting
Set character position
You can select in three colors,"White","Silver Gray", and "Dark Brown".
Sound and Screen
Back
Coloration
End
Esc
Beep
Screen
Coloration
White
Brightness
Character
position
Link
control
Silver
Gray
Auto-off
State
indication
OK
Sound and Screen
2
1
Dark
Brown
End
Character position
Beep
Screen
Coloration
Left
Brightness
Character
position
Link
control
Center
Auto-off
① Select the color you want to set.
② Press "OK".
Press "Coloration".
Back
State
indication
Press "Character position".
Right
Esc
○○○
1
OK
2
○○○
○○○
① Select a character position
you want to set.
② Press "OK".
Brightness setting
You can adjust the brightness of the screen light. Default is set as maximum.
Sound and Screen
Back
End
Brightness
Dark
Beep
Screen
Coloration
Brightness
Character
position
Link
control
Auto-off
Esc
OK
Bright
2
1
State
indication
Press "Brightness".
① Press "Dark" or
"Bright" arrows
according to your preference.
② Press "OK".
Please exit by pressing "End", and follow
24
the instructions on the screen.
25
Setting Sound and Screen
Steps to the
Setting Sound
and Screen
Setting
Button
SETTING
mode
Sound
Screen
Detailed
setting
Enter Password
Link
control
Setting Link
You can control Screen locking and Display settings with the external
Operational error can be prevented by locking the screen,and the
page displayed on the switch can be changed according to the layout.
control
switches by setting the addresses.
※ The same addresses for Relay control T/U and 6A Contact Output T/U can not be set.
※ The same addresses for Screen locking and Display setting can not be set.
Setting Screen locking
Linkage control
Back
End
Screen
locking
The operation of switches will be
invalidated.
Display
Selection of the pages is displayed.
Screen locking
Esc
Page 1
Effective
1
Ind. 63−3 Chg
Shows pages locked
when the assress
is ON.
① Press "Effective".
4 ② Press "Chg", and input the
OK
Page 2
2
address.
3
Page 3
③ Select pages you want to
set.
④ Press "OK".
Invalid
Display setting
Linkage control
Back
Screen
End
1
Chg
Display
Invalid
OK
ON control
OFF ctrl
setting
Page1
Display
Non-display
Page 2
Display
Non-display
Page 3
Display
Non-display
2
① Press "Effective".
② Press "Chg", and input
Press "Display".
③ Set "ON ctrl "and" OFF
Close Room
63-4
Reference
Room
Accounting
Division
All lights
OFF
Conference
room 1
"Page 2"
can not
be displayed.
Sel.
2
1
OFF control
Esc
Page 1
Display
Page 2
Display
Sel.
Non-display
2
Non-display
1
Page 3
1
2
Display
Non-display
Select "Display" or "Nondisplay".
Press "Sel".
2F
Conference
room 2
3F
If Screen locking addresses are set to Program Timer Unit (WRT3540K-8 etc.), the
screen can be locked at the time you want.
The external switch is OFF.
Sales
Division 2
Legal
Division
3
Esc
1F
case 2
63-4
Meeting
Room 2
3F
The external switch is ON.
case 1
If Screen locking addresses are included in "All OFF" Pattern control program,
you can turn off all the lights and lock the screen at the same time when you
press the "All OFF" Pattern switch.
Sales
Division 1
Meeting
Room 1
2F
All lights
OFF
3F
Accounting
Division
Reference
The example of Display setting
1F
LegalIt is impossible to operate.
④ Press "OK".
2F
Sales
Meeting
Room 2The screen isDivision
locked. 2
ctrl".
1F
Sales
Division 1
4
ON ctrl
setting
the address.
Division
The external switch is ON.
(When this switch is OFF,
the screen is unlocked.)
Ind. 63−4
Selection of the pages is displayed.
The example of Screen locking
63-3
Esc
Effective
Screen
locking
The operation of switches will be
invalidated.
Press "Screen locking".
Meeting
Room 1
Detailed setting
case
When one big conference room is divided to two small canference
room, by installing this product next to each entrance and set
"Effective", it will avoid controlling the entire room.
Please exit by pressing "End", and follow the instructions on the screen.
26
27
Setting Sound and Screen
Steps to the
Setting Sound
and Screen
Setting
Button
SETTING
mode
Detailed
setting
Enter Password
Sound
Screen
Detailed setting
You can display the states of loads in the switches by characters.
Setting State indication
You can set the auto-off.
You can select the state indication of loads without characters or
with characters.
Sound and Screen
Auto-off setting
Beep
Back
Screen
Brightness
Character
position
Auto-off
End
Coloration
Link
control
State
indication
Auto-OFF
Esc
10sec
Screen
Coloration
Brightness
Character
position
Link
control
2
OK
2
Without
character
With
character
State
indication
1
① Select "Without character" or
Press "State indication".
"With character".
② Press "OK".
30sec1
1min
Without character
you want to set.
Individual or Group:OFF
Meeting
Room 1
Individual or Group:OFF
Individual or Group:ON
Meeting
Room 1
Individual or Group:ON
Meeting
Room 1
Pattern:Disagreement
All lights
OFF
Pattern:Disagreement
All lights
OFF
Pattern:Agreement
All lights
OFF
Pattern:Agreement
Meeting
Room 1
Pattern
All lights
OFF
ON
Pattern
Please exit by pressing "End", and follow the instructions on the screen.
With character
OFF
② Press "OK".
28
Esc
OK
① Select the auto-off time
Press "Auto-off".
State indication
End
Beep
Auto-off
Sound and Screen
Back
29
Read / Write setting data with SD Memory Card
You can back up and edit setting data on your PC, by using SD Memory Card
[Optional].
To write and read the data safely, please follow the steps when inserting and
removing SD Memory Card.
※ The setting data of one LCD Appellation Touch Switch
can be written in one SD Memory Card.
Detailed setting
How to insert or remove SD Memory Card
SD Memory Card Slot is located on the side of the LCD Touch Panel Block.
After you remove LCD Touch Panel Block from Power Block,
please insert or remove SD Memory Card.
Steps to the Read / Write setting data with SD Memory Card
Setting
Button
SETTING
mode
Detailed
setting
Enter Password
Power Block
LCD Touch Panel Block
Plate
System
Shut down the system before inserting or
removing SD Memory Card.
N ote: Please exit the system before you insert or remove SD Memory Card.
If you remove LCD Touch Panel Block from Power Block before the
system is shut down, the data may be corrupted and the equipment
may be damaged.
System
Back
End
SD Write
SD Read
SD IN / OUT
Dialog box
Password
Maintainance
Yes
Press "SD IN/OUT".
Groove to remove
In order to insert
or remove the SD card,
is it ready to shut down the system?
No
Press "Yes".
SD Memory Card
After the screen light is turned off automatically,
you can insert or remove SD Memory Card.
※ When LCD Touch Panel Block is set into Power Block
after SD Memory Card is inserted or removed,
the screen will restart automatically.
30
(BACK)
●Panasonic made SD (HC) Memory Card [Optional]
4GB or less.
※Please note that all other data processing operation in the
SD Memory Card can not be guaranteed.
SD Memory Card Slot
31
Read / Write setting data with SD Memory Card
Detailed setting
Steps to the Read / Write setting data with SD Memory Card
Setting
Button
SETTING
mode
Detailed
setting
Enter Password
System
How to read the setting data
from SD Memory Card
How to write the setting data to SD Memory Card
System
SD Write
Dialog box
Back
SD Read
Password
System
End
SD IN / OUT
Maintainance
Write the setting data
to the SD Memory Card?
Yes
Press "SD Write".
Writing…
Back
End
SD Write
SD Read
SD IN / OUT
Dialog box
Password
Maintainance
No
Press "Yes".
Are you sure?
Yes
Press "SD Read".
Writing completed.
Read data from SD card.
The setting data is overwritten.
Reading…
Press "Yes".
Reading completed.
Close
Close
Press "Close".
When SD Memory Card is not
inserted, the following screen
will be displayed.
32
No
Press "Close".
Writing error occurred.
Close
When SD Memory Card is not
inserted,or the setting data is not
correct, the following screen will be
displayed.
Reading error occurred.
Close
33
Read / Write setting data with SD Memory Card
File format of reading and writing
■Data Format
How to edit the setting data written to SD Memory Card
Ｒ
The setting data written to SD Memory Card can be imported into Excel by following
this operation. (For Microsoft Excel 2003 version )
：CSV file
Ｒ
■Data Configuration
Detailed setting
：Refer to the following chart.
Ｒ
■The setting data that can be edited ：All data except addresses for "Link control". (P.26 - P.27)
■How to edit the setting data
Ｒ
Ｒ
Ｒ
：Possible to edit by text editors,Microsoft Office Excel etc..
(※ You need to edit and save the data as "Text".(P.35 - P.37))
N ote When you write the setting data to SD Memory Card the file name will be named
"wrt9261.csv" automatically.
Please do not change this file name. If changed, it will not work.
a new Excel file.
1 Open
Select "Data" - "Import External Data" Ｒ
Page　1　Settings
Page Name
Setting
Switch 1
settings
Switch 2
settings
Switch 3
settings
Switch 4
settings
delimiter "Comma"
4 Select
and click "Next".
Switch 5
settings
Switch 6
settings
Switch 7
settings
"Import Data".
Switch 8
settings
all of the data portion in the
5 Select
preview.
Page　2　Settings
Page Name
Setting
Switch 1
settings
Switch 2
settings
Switch 3
settings
Switch 4
settings
Switch 5
settings
Switch 6
settings
Switch 7
settings
Switch 8
settings
2 Select "wrt9261.csv" , Click "Open".
Page　3　Settings
Page Name
Setting
Switch 1
settings
Switch 2
settings
Switch 3
settings
Switch 4
settings
Cell to follow the column data format.
Select column data format "Text" and
then click "Finish".
Switch 5
settings
Switch 6
settings
Switch 7
settings
Switch 8
settings
6 Click "OK".
sheet displays the contents
7 Excel
of SD Memor y Card in Excel
Ｒ
Beep
34
Start
Screen
Coloration Brightness
Character
Position
Auto-Off
Link
Control
Dialog
Box
State
Indication
Password
3
Click "Next".
Spreadsheet Format.
Select “Text”.
35
Read / Write setting data with SD Memory Card
The setting
data that can be read and written（Factory default settings）
SDカードを用いて読書きするファイル書式
Heading
Name of Page
Settings
Initial
Setting
Within 10 characters
Blank
Data Name Switch
Name of Switch
(Before Changing Line) (First half)
Within 10 characters
Blank
Data Name Switch
(Second half)
Within 10 characters
Blank
Shape of switch
Combining data switch
Please fill in the two-digit number.
Of vertical coupling: 10th of
Horizontal bond number: 1 digit
(Example) When you join one vertical column,
enter "41" type.
※ If you want to join, please enter "00" from the
second switch.
Type of Switch
Separate switch /
Dimmer switch
0：Individual　1：Dimmer
0
Color of Switch
Switch display color
0：Default　1：Yellow　2：Blue
0
Address data type
0：Individual　1：Group
2：Pattern　3：Dimmer
0
Contacts
Enter a number. However, unset address is
represented by the blank.
※ If the individual, enter "Channel ""-"" load number"
Name of Switch
(After Changing Line)
Address Type
of Switch
Address of Switch
Timer Set of Switch
Beep
Start Screen
Start Screen
(Address of
Display : ON)
Start Screen
(Address of
Display : OFF)
Coloration
36
Page name data
Guidelines for application setting
Timer data
Operation sound
At startup, the screen
goes off
When returning from
settings /
The cleaning mode
Wakeup
0：ON-Timer 30sec 1：ON-Timer 1min
2：ON-Timer 5min 3：ON-Timer 1hr
4：ON-Timer 2hr　5：Off -Delay 30sec
6：Off -Delay 1min 7：Off -Delay 5min
8：None
0：OFF　1：ON
0：Page 1
1：Page 2
2：Page 3
(The show was off the screen just before
0：White　1：Silver Gray　2：Dark Brown
Guidelines for application setting
Initial
Setting
Set the brightness
of the screen
0：Level1　1：Level2　2：Level3
(Higher the level, brighter the number)
2
Character Position
Horizontal Switch
Name and character
position setup
0：Left　1：Center　2：Right
1
Backlight Automatic
Backlight turn off Timer
0：10sec　1：30sec　2：1min
0
Screen Locking
The screen lock
0：Invalid　1：Effective
Enable / disable setting:
0
Screen lock feature
To use
Virtual terminal address
※This section is not set.
The instrument can be set only on the screen.
Page of Screen Locking
Screen lock setup
page
0：Page1　1：Page2　2：Page3
3：Page1 and 2　4：Page1 and 3
5：Page2 and 3　6：All　7：None
7
Display
Display features
Enable / Disable
0：Invalid　1：Effective
0
Address of Display
Display features
to use
Virtual terminal address
※This section is not set.
The instrument can be set only on the screen.
ON Control
0：Page1　1：Page2　2：Page3
Setting displayed address 3：Page1 and 2　4：Page1 and 3
when turned on
5：Page2 and 3　6：All　7：None
6
OFF Control
0：Page1　1：Page2　2：Page3
Setting displayed address
3：Page1 and 2　4：Page1 and 3
when turned off
5：Page2 and 3　6：All　7：None
6
Dialog Box
Confirmation Dialog
Control
0：Invalid　1：Effective
0
State Indication
Enable text based
status
0：OFF　1：ON
0
Address of Screen
Locking
8
1
0
Settings
Brightness
Blank
0
3：Last screen
the end Page)
Screenshot
Color Settings
11
Heading
Detailed setting
0
Password
To edit settings.
4-digit
Blank
Blank
0123
0
37
System
Detailed setting
Steps to the System
Setting
Button
SETTING
mode
Enter Password
Detailed
setting
System
Dialog box is displayed when operating in the normal screen.
The operational error can be prevented.
Setting Dialog box
How to change the password
Example of Dialog box
Meeting
Room 2
Sales
Division 2
Do you want to control?
Legal
Division
Yes
All lights
OFF
Back
End
SD Write
SD Read
SD IN / OUT
Dialog box
Password
Maintainance
3F
Accounting
Division
Reference
Room
No
System
2F
Sales
Division 1
1F
Meeting
Room 1
Press "Password".
Dialog box
System
Back
End
Dialog box
Esc
SD Read
SD IN / OUT
Dialog box when switch is operated.
Dialog box
Password
Maintainance
Effective
Press "Dialog box".
① Press "Effective"
② Press "OK".
2
1
New Password
OK
Clear
1
2
3
4
5
6
7
8
9
0
Enter a new four-digit password and
press "OK".
※When you forget your password and want to
initialize your password without changing the
settings, please contact our nearest sales office.
or "Invalid".
Please exit by pressing "End", and follow
38
Esc
OK
SD Write
Invalid
Password change
the instructions on the screen.
39
Maintenance
Detailed setting
Steps to the Maintenance
Setting
Button
SETTING
mode
The screen can be locked temporarily (5 minutes) for cleaning purposes.
Detailed
setting
Enter Password
System
Maintenance
Initiali
-zation
Screen
adjustment
Will you return to
Are you sure
the factory default settings?
to initialize it?
Yes
Version
No
Yes
Sales
Division 1
Meeting
Room 2
Sales
Division 2
Legal
Division
Reference
Room
Accounting
Division
All lights
OFF
Please select the button.
SETTING
mode
CLEAN mode
3F
Maintainance
OK
Back
Meeting
Room 1
2F
Initialization
CLEAN mode
1F
When the layout is changed, you can initialize the settings.
(Factory default settings)
Esc
CLEAN mode / Cleaning Instructions
Press "CLEAN mode".
No
Press "Setting Button".
Press "Initialization".
Press "Yes".
Press "Yes".
You can adjust the touching point when it is not pointing properly.
When this screen is displayed,you can clean the screen.
＋
Press "Screen adjustment".
2＋
5
Esc
OK
Screen
adjustment
Touch [+] to start.
＋
4
Press the center
of "＋" from ①
to
Maintainance
Initiali
-zation
Screen Adjustment
Screen
adjustment
Version
3
＋
Version
After correction, the screen will be
back to "Maintenance" automatically.
⑤ in order.
Note
Do not use sharp tipped pens
or pencils.
This may cause damages to the
screen.
Touch panel correction failed.
Please start over again,
when failed.
OK
Please exit by pressing "End", and follow the instructions on the screen.
40
＊Compulse return
Press ○ button
for more than five seconds.
"CLEAN mode" return to the normal screen
automatically after 300 seconds.
シーン
ON
Press ○ button
生産管理部
生産管理部
for more than five
seconds.
生産管理部
生産管理部
シーン
1＋
生産管理部
生産管理部
The screen does
not respond
for 300 seconds.
生産管理部
生産管理部
＊Compulse
return
生産管理部
生産管理部
ON
OK
生産管理部
生産管理部
CLEAN mode
2F
Esc
Initiali
-zation
1F
Maintainance
The screen does not respond
for 300 seconds.
生産管理部
生産管理部
シーン
Please correct with the stylus pen made of plastic.
When you correct with your finger, you may not be able to correct.
シーン
CLEAN mode
OFF
Screen adjustment
Press and hold "Setting Button" for 5 seconds
or more. Then, it is possible to return to the
normal screen.
Cleaning Instructions
Please wipe the screen and the body with
the cloth that is soaked in the neutral detergent
and then squeezed.
Discoloration and the breakdown might occur if
you use the detergents other than the neutral
detergent.
Benzine
Thinner
Insect
killer
Alkaline detergent
Acid detergent
41
Troubleshooting
Ratings and Specifications
If the following messages appear, please confirm the mode and
take corrective action accordingly.
Error Message
Cause
Corrective Action
●FULL-2WAY signal wire is broken.
FULL-2WAY
Communication error
occurred.
Only setting mode can be operated.
●FULL-2WAY signal wire is not connected.
●Transmission unit is powered off.
200 mA
Rated Input Signal Voltage
±24 V
Please check the power of
the Transmission unit.
Rated Signal Current Consumption
15 mA
Please replace the unit.
System error occurred. 02
It is impossible
to operate right now.
Please contact with the manager
of the system.
●Malfunction is found in the touch panel.
Please replace the unit.
●The touch panel is kept pressed
with something.
Please remove the one
keeping pressing
※Other error messages during work are described in P.32, P.33,and P.40 .
If the unit is not functioning properly, before your contact manufacturer please check the following.
2-Wire Non Polarized Wiring Method
Signal Transmission Method
Cyclic Time Division Multiplex Transmission Method
Transmission Frequency
10 kHz ± 1 kHz
Error Detection Method
Odd Number parity check, checksum
Signal form
Start Signal Channel Signal Load Control Signal Monitor Signal End Signal
Applicable Transmission Unit
WRT2050 Series , WRT2040 Series ,WRT2000 Series
Not for U.S.A
transformer
For U.S.A
WR2301-811,WR2311-821, WR2311-851
Up to 24 Individual, Group and Pattern switches can be set in total.
※ Please set Pattern / Group control data separately when you use for
Pattern / Group switches.
Number of switches can be controlled
Up to 6 Dimmer switches can be set in total.
※ The size of Dimmer switch is four times the minimum size of Individual or
Pattern or Group switch.
Solid wire of 0.65 mm -1.6 mm in diameter
(Signal)
Stranded wire of 0.5 mm 2 - 2.0 mm 2 in section
Applicable wire gauge
Solid wire of 0.9 mm -1.6 mm in diameter
(24 V AC)
Stranded wire of 0.75 mm 2 - 2.0 mm 2 in section
0.2(4.9) MAX
0.2(4.9) MAX
Please replace the fuse.
Is the fuse for the (remote control) tansformer
connected ?
Please check the connected position.
Refer to P.6
Please select "ON" in Beep setting.
Refer to P.22
AC 24 V input wire length
Please set the brightness at the side of "Bright".
Refer to P.24
Operating temperature
0 ℃ - ＋ 40 ℃
LCD life (When the backlight is lighting)
20,000 hours (reference)
SD Memory Card
SD Memory Card (4GB or less) [Optional]
Is "OFF" selected in Beep setting.
The screen is not
bright enough
Did you set the brightness at the side of
"Dark" ?
It is no response when The gap might be generated between the
operation point and the display position.
screen is touched.
Please adjust the screen.
Refer to P.40
Crimp Terminal Application
Plate applied
Ф0.15
(Ф3.7)MIN
Is the fuse for the (remote control) transformer
blown ?
Ф0.3
(Ф7.6)MAX
Please touch the screen.
0.15
(3.7)MIN
Is the screen light auto-off ?
It does not beep.
42
Corrective Action
24 V AC
Signal Wiring Method
0.3(7.6)MAX
The screen is
not displayed.
Check points
For U.S.A
Specifications
Applicable Remote Control
System error occurred. 03
States
Not for U.S.A
24 V AC (for Remote Control Transformer only)
Rated Current Consumption
It is impossible
to operate right now.
Please contact with the manager
of the system.
It is impossible
to operate right now.
Please contact with the manager
of the system.
Rated Input Voltage
Please check the connection
of FULL-2WAY signal wire.
System error occurred. 01
●Malfunction is found in hardware.
Ratings
φ1.2 mm - φ1.6 mm(1.25 mm2 -2.0 mm2): 100m
[inch(mm)]
φ0.9 mm(0.75 mm2): 50m
COSMO Module Plates applicable to switches (WTC9222-8, etc.)[Optional]
GLACIER Series Plates applicable to switches [Optional]
43