RETAIL PRICE LIST (Prices include 17.5% VAT but not carriage).
Rifles and optional works
1.
1.1.
1.2
1.3
1.4
1.5
2.
3.1
3.2
4.
5.0
5.1
6.1
6.2
6.3
6.4
7.1
7.2
7.3
8.
Price
Remington 700 PSS (Police Model) rifle, complete with H-S Precision
Police Sniper stock and Remington hammer forged barrel
Calibre: 7.62/.308 (1-12”) 5.56/.223(1 in 9”)
£1,076.00
Remington 700 SPS Varmint** R/H .308 .243, 7mm-08
£ 665.00
Rem. 700 SPS Varmint** LEFT HAND .243 Win (1-9.125”).308
£ 692.00
(** N.B. We strongly recommend that the factory polymer Varmint stock is replaced
with a composite chassis type stock such as those suggested on pages 2 & 3 below.)
Remington 700 action with new hammer forged barrel *(without stock)
Calibre: 7.62/.308, 5.56/.223,(other calibres – please ask)
from
£ 985.00

(*Select stock from H-S Precision, Bell & Carlson, AICS etc options on pages 2 & 3 ).
Remington 700 LEFT HAND with new hammer forged barrel *(w/o stock) £1,047.00
Other Remington 700 rifles, e.g. VS, VSSF ……………
Calibre: 7.62/.308, 5.56/.223, ,(other calibres – please ask)
POA

(NB: Left-handed action Remington rifles subject to availability.)
Armalon ‘PR’ conversion to accept M14 (.308) or AR15 (.223)
20 rd magazines, *excl mags (*see 21 to 27 to select mags required)
£ 388.00

(Conversion of customer’s own rifle – same price)
Armalon ‘PR’ “M” type QD mag conversion to AICS system *excl. mags £ 286.00
Matt black finish to bolt, action-body, barrel and all other exposed stainless
steel parts
Extra over (3) £ 148.00

New replacement hammer forged HV profile Armalon 26” barrel, e.g.
.223 cal 1 in 200mm (7.874ins) twist, .308 cal 1 in 12 ins twist
from
£ 345.00

Special barrel length inc. re-crowning
£ 65.50

Barrel fluting
up to 20” barrel
up to 22” barrel
up to 24” barrel
up to 26” barrel
Armalon muzzle brake
Thread protector
Pin spanner
Armalon mirage band and attachment clips (needs muzzle brake,
thread protector or other forward attachment clip on barrel)
£
£
£
£
£
£
£
165.00
170.00
175.50
179.00
165.00
34.50
12.00
£
49.00






Supply only Armalon stainless steel full-bore sound moderator (* requires proofing – see 12):
over-barrel type, self finish or black finish (can be fully taken apart for cleaning)
(Please state calibre if ordering)
£ 255.00

9.1
Screw-cut barrel and fit rear support bushing (supplied with moderator) £ 75.50
9.2
Supply and fit replacement collet type polymer rear bushing
£ 28.50
9.3
Supply and fit aluminium rear bushing
£ 30.00
(N.B. Our moderators are available with a variety of thread sizes and pitches but we do not
recommend any with less than a 5/8” diameter to avoid possible thread imprint in bore.)
11.
Supply and fit thread protector to suit moderator thread on barrel
£ 26.00

12.
Proofing/reproofing (required for all work or options involving alteration to
or supply of new or un-proofed pressure bearing components)
£ 25.00

13.
Optimise standard factory trigger
£ 28.00

14.
Match modify new Rem XMark Pro trigger
£ 58.00
15.1
Standard De-Luxe Timney replacement trigger group (supply only)
£ 132.00

15.2
As above but inc. installation
£ 158.00

15.3
Additional for Left Hand Timney trigger
£ 30.00

16&17 Modified bolt stop (to avoid distortion of trigger pins), polish bolt body &
feed ramp, square up receiver face and lap in locking lugs to action etc £ 115.00

18
Supply (£8.00) and fit Armalon 28lb silicon chrome firing pin spring
£ 24.00

18.1
Supply (£58) and fit Armalon Lightning lightweight firing pin and spring £ 68.00
19.
Enlarged recoil lug supplied and fitted (requires re-proofing)
£ 89.00

20.
Sako style extractor, supply and installation (requires re-proofing)
£ 125.00

9.0
1
Magazines
21.
Adapt customer’s own M14/M1A/AR15 magazine
22.
‘PR’ M14 pattern Armalon magazine 20rd
23.
‘PR’ M14/M1A type steel magazine 10rd
24.
‘PR’ M14/M1A type steel magazine
5rd
25.
‘PR’ AR15 type aluminium magazine 20rd
26.
‘PR’ AR15 type aluminium magazine 10rd
27.
.223 cal 30rd magazines sometimes available
£
£
£
£
£
£
15.00
38.50
54.00
54.00
POA
POA
POA
Accessories
28.
Harris light ‘S’ type bipod (lateral pivoting type)
£ 101.00
28.1
No.6 stud – fits accessory rail for Harris bipod or UM swivels
£ 14.50
28.2
Versapod (P-H type bipod) Non-locking type metal or rubber feet universal
mounting adapter (with handstop) 9” to 12” adjustable (std. ht.)
£ 76.00
28.3
As above but all steel construction w/metal or rubber feet
£ 112.50
28.4
Versapod locking type bipod w/spring activated legs + 2Way lock, rubber feet,
7” to 9” short prone
£ 92.00
9” to 12” std
£ 96.00
15” to 23” sitting.
£ 111.50
28.5* Extra to above for Versapod bipods with UIT (Anschutz type) rail adaptor £
9.50
*(N.B. item 31. inletted forend rail required)

28.6
Extra for Picatinny rail adaptor, where available with Versapods.
£ 39.00
28.7
Pod-Loc friction lock system for Harris S type bipods (inc fitting)
£ 29.50
29.
Parker-Hale steel bipod
£ 149.00
29.1
Parker-Hale handstop and spigot (spigot alone £8.50)
£ 33.00
30.
Forward handgrip (olive) SA80-LSW type w/attachment for access. rail £ 49.00
30.1
Extra over (12) above for black
£
6.00
31.
Anschutz type accessory rail inletted into forestock
£ 98.00
33.
Armalon Garand type leather sling, brass fittings, tan or black
£ 49.00
33.1
AICS sling and clips
£ 49.00
37.
UM QD sling swivels (pair) 1” or 1 ¼”
£ 14.50
38.
Supply and install UM sling swivel studs to butt and forend
£ 26.50
38.1
Supply and fit special Armalon reinforced sling swivel/bipod stud
£ 35.00
40.
Gunguard hard carrying case (black) single rifle 49” x 9” x 4”
£ 121.50
40.1
Gunguard hard carrying case (black) double rifle 52” x 11” x 4”
£ 142.00
40.2
Tact.dragbags: AIM 50 Black, Green, Tan and Camo
£ 139.00
AIM 60 Black, Green, Tan and Camo
£ 159.00
40.3
Classic stalkers AIM dragbag (no ext pockets) camo or Tan
£ 120.00
40.4
AIM large fold-up shooting mat with carrying bag , Camo, Green and Tan£ 95.00

Armalon bolt handle knobs
41.
Modification to original Remington bolt
£ 59.50
41.1
Ball knobs
25mm,30mm32mm and 35mm
£
6.50
41.2
Radiused knobs 30mm and 35mm
£ 10.00
41.3
Armalon Tapered aluminium knob (black anodised) for above
£ 25.00
























H-S Precision Pro-Series stocks (Prices do not include fitting/labour charges etc) with full-length
(from forend to butt stock) 7075 aluminium imbedded chassis and action bedding seat in
structural foam cored carbon fibre/Kevlar/GRP shell;
42.1
Varmint Models, Black
from £ 398.50

42.2
Varmint Model as above but LEFT HAND
from £ 398.50

42.3
Vertical grip adj. height cheekpiece + butt length PST25
from £ 739.00

Bell & Carlson Stocks (Kevlar/graphite/fibreglass shell + structural foam with full length imbedded
6061-T6 aluminium chassis & action bedding seat system)
46.1
Medallist fixed Varmint type; L/A and S/A Black and Olive Green from £ 342.00
46.2
Medallist Tactical (pistol grip pattern with adj. butt & cheekpiece + forend accessory rail)
L/A and S/A, Black, Olive Green 7Tan (other colours available) from £ 496.00

2
AICS Systems for Rem 700 actions Olive Green, Black. or Brown (not inc. fitting/labour charges)
(NB: These are recommended for conversion to our ‘PR’ ”M” type large capacity mag. configuration.)
All kits are supplied with a 5 rd mag. 10rd mags are available, at extra cost for short action only.
47.1
Standard S/A with cheekpiece
£ 667.00
47.2
Standard L/A with cheekpiece
£ 717.00

47.3
Folding stock S/A with cheekpiece
£ 866.00

47.4
Folding stock L/A with cheekpiece
£ 914.00

47.5. Armalon conversion to left-hand AICS
£ 235.00
3.2
Armalon ‘PR’ “M” type QD mag conversion to AICS system *excl. mags £ 286.00
(see 21 to 27 for relevant magazines for Armalon’s “M” type conversion).
AICS Magazines & accessories:48.1
5 rd short action AICS
48.2
10 rd short action AICS
48.3
5rd long action AICS
48.4
.222/.223 10 rd (polymer) magazine (S/A)
49.1
AI Picatinny rail (steel 7”)
L/A and S/A
49.2
AI Picatinny rail (steel 9”)
L/A and S/A
49.3
AI one piece 34mm scope mount (Picatinny)
49.4
Reduction inserts 34/30 or 34/26mm
49.5
Adjustable target butt pad
49.6
AI steel bipod
49.7
Accushot BT08 Rear monopod
49.8
Accushot BT08QK monopod
Other AI accessories available – please enquire.
Mounts and rings (The prices below do not include fitting/mounting etc.)
“PicT” are Armalon’s Picatinny or Weaver style mounting bases and rings.
50.
Armalon 1 piece “PicT” base (approx. 20 moa pre-cant) S/A and L/A
All CNC machined from solid alloy steel bar stock
54.
Armalon 34mm “PicT” rings Low, Med, High and Ultra High
55.
Armalon 34mm “PicT” 7075 ali Magnum rings
56.
Armalon 30mm steel “PicT” rings Low, Med, High and Ultra High
57.
Reducer inserts for 30mm rings 1 inch and 26mm


55.50
67.00
63.50
35.00
135.00
143.00
143.00
40.00
82.50
251.00
143.00
159.00

£ 185.00

£ 164.00
£ 128.00
£ 154.00
£ 19.50


£
£
£
£
£
£
£
£
£
£
£
£





Optical sights
58.
Please call us for options/suggestions
Prices subject to change without notice.
FEBRUARY 2010
3