‫احتياجات قسم هندسة الحاسوب‬
Item #
1
Title
Microcontroller
Specification
 System that supports over 8-, 14-, 18-, 20-, 28- and
40-pin PIC MCUs.
Trainer Kit
Specifications

A hardware tool designed for testing and debugging
programs on PIC microcontrollers.

Allows PIC microcontrollers to be interfaced with a
wide range of peripheral modules.

On-board 16-bit I/O port expanderMCP23S17 that
uses SPI communication.

RS-232 communication with a PC or a
microcontroller is performed via DB9 connector.

System can be configured by means of DIP
switches. Each DIP switch configures one part of the
system.

On-board Digital thermometer

System provides support for MCUs in DIP8, DIP14,
DIP18, DIP20, DIP28 andDIP40 packages. Must
come with a PIC16F877A.

Potentiometers used for testing multiple A/D
conversions. Inputs can be configured via jumpers.

USB or external power supply source is selected by
moving a jumper.Power supply switchturns the
system on/off.

2x16 character COG Display is used for displaying
text messages. It is connected to the system via SPI.

All microcontroller pins are connected to theIDC10
connectors for further expansion.

1
LEDs (Light Emitting Diodes) are used to indicate the
Qty
10
logic states of all microcontroller pins.
 Multiplexing seven segment LED displays

LED dot matrix display

On-board jumpers are used for pull-up or pulldown port configuration. They are available for all
pins.

Push buttons are used to excite microcontroller
digital inputs. They are connected to all
microcontroller pins.

DIP switch is used to separate port pins from pullup/pull-down resistors.

Very fast USB 2.0
programmer withmikroICD support. There is no
need for connecting the external programmer
LCD can be easily connected via the on-board connector
that is also connected to MCU pins.
LCD Contrast Potentiometer used for adjusting LCD
contrast.
External power supply can be either DC or AC. The onboard jumper is used for selecting external power supply.
Quartz Crystal is replaceable. The MCU pins can be
configured via jumpers as oscillator inputs or regular I/O
pins.
Graphic LCD 128x64 can be easily connected to the board
via the appropriate connector. It is connected to MCU pins.
Voltage level to be applied when a button is pressed (GND
or +5V) is selected via the on-board jumper.
USB communication connector enables you to connect
your microcontroller with a PC via USB interface.
2
Inter-Integrated Circuit (I2C) communication
Reset circuit is used to reset the microcontroller. It is
connected to theMCLR pin of the microcontroller.
PS2 connector enables the development system to be
directly connected to a PS/2 device such as keyboard or
mouse.
4x4 Keypad allows efficient entry of numeric data and other
characters as well.
Menu Keypad enables easy and fast menu browsing for
your prototype device.
Port Expander enables you to add more inputs or outputs to
your prototype device.
Kit must include:

mikroBasic PRO for PIC compiler with USB Dongle
Licence

SmartPROTO Board

EasyConnect Board

Character LCD 2x16 with blue backlight

DS1820 Temperature Sensor

Graphic LCD 128x64 with TouchPanel

Serial Cable

USB cable

Printed manuals

DVD with software, drivers, board and examples
Accessories must be included:

Storage boards support various memory standards such as
MMC/SD, Compact Flash, EEPROM, etc. Whether you
need to store just configuration data, or a large amount of
information, these boards are the best choice for you.
3

Add reliable timer, alarm and real-time clock functionality
to your application. Let these boards take care of it, so you
can exploit your microcontroller’s precious clock cycles on
something more important.

Display boards provide easy-to-use interfaces for LCD,
GLCD and TFT displays of various sizes.

Data acquisition is a critical task for various embedded
applications where monitoring and control is needed.
Measurement boards are ideal solutions for converting data
from analog to digital world and versa-visa.

RFid readers, relays, motion sensors, stepper motor drivers,
DC motor drivers, Servo motor drivers and lot of other
boards .

Audio & Voice Boards enable you to easily add audio
features to your prototype device.

power supply control boards, such as regulators,
translators, etc., that can be used for various electronic
applications.
-
Components must be included :-(10 pieces for each):
1. 293D (H-bridge)
2. L297
3. L298 motor driver
4. L6026 driver
5. ULN2003A driver
6. LM35 temperature sensor
7. UCN5804B
8. MAX232
9. FT232BM(USB232)
ُEU .USA‫المنشأ‬
4