ANNUAL PLAN OF FORM 5 ENGINEERING DRAWING 2011
UNIT 9 : OBLIQUE DRAWING
WEEKLY/MONTHLY
LEARNING AREA
Week 2 - 3
10 - 25 January
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
9.1 Concepts of Oblique
Drawing
Identify :
-
Axis in oblique drawing
oblique axis
receding axis
horinzontal axis
vertical axis
Explain concepts of circles,arcs and
curves in Oblique Drawing.
Identify characteristics of Oblique
Drawing
- oblique lines
- non-oblique lines
- angles in oblique
- circles in oblique
- arcs in oblique
9.2 Types of Oblique
Drawing
Level 1
Identify types of Oblique Drawing:
- Common Oblique
- Cavalier Oblique
- Cabinet Oblique
9.3 Selection of Orientation
of Oblique Drawing
Level 2
Select the best orinntation to produce
Oblique Drawing
9.4 Constructions Of
Oblique Drawing.
a.
b.
Box Method
Frame Method
Construct Oblique Drawing of
geometrical solids by:
- Box Method
- Frame Method
Level 2
Level 1
Dimensioning of Oblique Drawing
9.6 Application of Oblique
Drawing in Engineering
Orientation of oblique
drawing
Level 1
Draw circles on Oblique Axis:
- Four-center method
- Coordinate Method
9.5 Dimensioning of
Oblique Drawing
Types of oblique
drawing
Level 2
Apply Oblique Drawing for objects
or components from various
engineering sectors.
Construct oblique
drawing
ANNUAL PLAN OF FORM 5 ENGINEERING DRAWING 2011
UNIT 10 : PERSPECTIVE DRAWING
WEEKLY/MONTHLY
Week 2 - 8
LEARNING AREA
10.1 Concept of
Perspective Drawing
9 Jan. – 24 Feb.
2011
TOV test 2011
6 – 23 Feb.
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
Explain concept of Perspective
Drawing.
10.2 Types of Perspective
Drawing
Level 1
Identify and differentiate types of
perspective drawing:
- One-point Perspective
- Two-point Perspective
- Three-point Perspective
10.3 Elements of
Perspective Drawing
Level 1
Explain function of elements in
Perspective Drawing
-
10.4 Constructions Of
Perspective Drawing.
Knows the function of
elements in perspective
drawing
Station Point (SP)
Viewwing Lines (VL)
Picture Plane(PP)
Horizon (H)
Vanishinrg point (VP)
Ground Line (GL)
True Height (TH)
Level 1
Construct One-point Perspective
Drawing for a solid on flat surfaces,
inclined surface and oblique surface.
Construct one-point
perspective drawing
Level 2
Construct Two-point Perspective
Drawing for a solid on flat surfaces,
inclined surface and oblique surface.
10.5
Application of Oblique
Drawing in Engineering
Level 3
Apply Perspective Drawing for
objects or components from various
engineering sectors.
Construct two-point
perspective drawing
ANNUAL PLAN OF FORM 5 ENGINEERING DRAWING 2011
UNIT 11 : COMPUTER AIDED DRAFTING (CAD) II
WEEKLY/MONTHLY
LEARNING AREA
Week 9 - 10
11.1 Application of various
Command to construct
Block Drawing
27 Feb – 10 March
2011
Mid of 1st term
Holiday
11.03.11-19.03.11
( 9 days )
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
Use AutoCAD software commands:
-Snap
-Grid
-Trim
-Undo
-Redo
-Block
-Insert
Apply various
commands in the
AutoCAD software
-Draw Title Block
Level 2
- Apply Layers
- Use AutoCAD software command
To construct 2D block diagrams.
-
11.2 Text and
Dimensioning
.
Level 2
11.3 Printing the CAD
Drawing
Level 1
Produce simple
orthographic and
isometric drawings
Orthographic Projection
Drawing
Isometric Drawing
Use text commands and
dimension in CAD Drawing
- Mtext
- Dtext
- Dim
Dimensioning the
drawing
-
Print out the CAD
drawings
Explain Print Command
Print CAD assignment
ANNUAL PLAN OF FORM 5 ENGINEERING DRAWING 2011
UNIT 12 : INTERSECTION DRAWING
WEEKLY/MONTHLY
Week 11 - 14
LEARNING AREA
12.1 Concepts of
Intersection
20 March. – 14 April
2011
12.2 Methods of
Determining lines and
Curves of Intersection
Level 2
12.3 Application of
Intersection Drawing
Level 2
Premier Academic
Camp 2011
CONTENT/SKILLS.
Level 1
Explain the concepts of Intersection:
- between two lines
- between line and plane
- between two planes
Mid-Year Exam
10-26/05/11
Mid Year Holiday
2011
27.05.11-11.06.11
( 16 days )
LEARNING OUTCOMES
Determine the intersection points
By using:
- Edge-view method
- Cutting plane method
Determine points of intersection and
Construct lines or intersection curves
Between two solid objects at right
angle and other angles(non-offset)
-
Different surfaces
meeting each other
Determine points of
intersection
Construct intersection
lines or curves
Solid prism
Solid cyclinder
Solid pyramid
Solid cone
Level 3
Construct lines and intersection
Curves of object or components.
Construct intersection
lines or curves for
geometric solid
UNIT 13 : DEVELOPMENTS
WEEKLY/MONTHLY
Week 24 - 26
LEARNING AREA
13.1 Concept of
Developments
3 Jul. – 21 Jul.
2011
Layout on a flat plane is
the inside surface of the
object
Identify the lines in orthographic
Projection which are not the true
lengths.
Seminar on answering
technicque
Phase I - 30/7(Sat.)
Phase II -6/8(Sat.)
Phase III – 13/8(Sat.)
Week 30 – 31
22 August – 4 Sept.
CONTENT/SKILLS.
Level 1
Explain the principles of
Developments
- true length
- true angle
- true shape
Week 27 – 29
24 – 21 August
Mid of 2nd Term
Holiday
26/08/11- 3/09/11
( 9 days )
LEARNING OUTCOMES
Level 2
Determine correctly and accurately
the true length of lines by Revolving
Methods:
13.2 Classifications of
Solids Objects and
Types of
Developments
Determining true length
Level 1
Identify the classifications of blocks
And types of developments Drawing,
-
SPM TRIAL 2011
August – Sept.
Prism and cyclinder
Pyramid and cone
Transition parts
Types of Developments
-Parallel line method
-Radial line method
-Triangulations Method
13.2 Applications of
Developments of
Regular Solids
Level 1
State common terminologies in
Developments drawing
- elements
- stretch-out lines
- fold lines
- seam
Level 2
Construct Developments of solids
By parallel line methods for:
- Vertical oblique and
truncated prisms
By using radial line method for
Vertical and truncated cones.
Construct development
drawing of various
geometric hollow
ANNUAL PLAN OF FORM 5 ENGINEERING DRAWING 2011
UNIT 14 : SECTIONAL VIEWS ( Paper 3759/2 )
WEEKLY/MONTHLY
Week 15 - 16
LEARNING AREA
14.1 Concept of
Sectional Views
17 April –30 April
2011
14.2 Types of sectional
views
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
* Explain concept of sectional views
* Apply principle projection of
Sectional views to produce a clear
And effective view
* use cutting plane
* use cutting line
* use break symbol
Level 1
* Understand types of sectional
views
Level 2
* select and project suitable
Sectional views of related objects
14.3 Applications of
Sectional views
Level 2
Construct sectional views of simple
Machine components
- full section
- offset section
- aligned section
UNIT 15 : MECHANICAL DRAWING
WEEKLY/MONTHLY
Week 15-16
17 April –30 April
2011
LEARNING AREA
15.1 Introduction
LEARNING OUTCOMES
Level 1
* Identify and differentiate types of
Mechanical Drawing
- Detailed/Working Drawing
- Assembly Drawing
* Identify and comply with the
Normal practice and convention in
Mechanical drawing
Level 2
* Draw Mechanical Drawing for a
Single symmetrical machine
Component complying to common
Practices and related conventions.
* Draw sectional views of a single
Symmetrical machine components
Complying to common practices
And related conventions
* Draw Orthographic Projection
Drawing of same components
CONTENT/SKILLS.
UNIT 16 : BUILDING DRAWING
WEEKLY/MONTHLY
Week 17 - 18
LEARNING AREA
16.1 Introduction
1 May –14May
2011
Week 18 - 20
Mid-Year Exam
10/5/11 – 26/5/11
16.2 Application of
Building Drawing of
Single and DoubleStorey Residential
Buildings
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
* Identify and differentiate types of
Building Drawing
- Plan Drawing
- Elevation/View drawing
- Sectional Drawing
- Detailed Drawing
* Identify the use of standard
Architectural symbols in Building
Drawing
Level 2
* Draw Orthographic Projection of
Single and double-storey residential
Building
a) Plan Drawing
- Floor Plan
- Roof plan
b) Elevation/ View Drawing
Level 3
* Draw Building Drawing using
Appropriate scale for single and
Double-storey residential buildings
a)
Plan Drawing
- Floor plan
- Roof plan
b) Elevation/View Drawing
UNIT 17 : PIPING DRAWING
WEEKLY/MONTHLY
LEARNING AREA
Week 21
12 Jun – 18 Jun
2011
15.1 Introduction to Piping
Drawing
LEARNING OUTCOMES
Level 1
* Identify and differentiate types of
Piping Drawing
- Orthographic piping
- Isometric Piping
* Identify standards piping symbols
* Explain domestic piping system
* Explain piping by laws and
Comply to them when producing
Piping drawing
Level 2
* Draw Orthographic Piping
Drawing from isometric piping
Drawing of a single-storey
building
CONTENT/SKILLS.
ANNUAL PLAN OF FORM 5 ENGINEERING DRAWING 2011
UNIT 18 : ELECTRICAL DRAWING
WEEKLY/MONTHLY
Week 22
LEARNING AREA
18.1 Introduction to
Electrical Drawing
19 Jun – 25 Jun
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
* Identify Electrical Drawing
- block diagram
- schematic diagram
- wiring diagram
* Explain standard symbols of
Accessories,switches and
Distribution fuse in Electrical
Drawing.
18.2 Application of
Electrical
Level 2
* Layout electrical accessories
Wiring and appliance of electrical
Drawing.
* Draw standard symbols of
Electrical appliances and control
System according
UNIT 19 : ELECTRONIC DRAWING
WEEKLY/MONTHLY
Week 23
26 Jun – 30 Jun
LEARNING AREA
19.1 Introduction to
Electronic Drawing.
LEARNING OUTCOMES
Level 1
* Identify types of Electronic
Drawing
- Schematics circuit drawing
- Wiring circuit drawing
- Printed circuit drawing
* Identify standards electronic
Components:
- Functions
- Polarities
19.2 Applications of
Electronic drawing
Level 2
* Draw Schematic Circuit based on
Printed circuit
Draw Schematic Circuit based on
Wiring circuit
CONTENT/SKILLS.
ANNUAL PLAN OF FORM 4 ENGINEERING DRAWING 2011
UNIT 1 : INTRODUCTION
WEEKLY/MONTHLY
Week 3
16 – 20 Jan.
LEARNING AREA
1.1 Evolution of
Drawing,System and
Standardization
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
Narrate the development of ED
Explain CAD
Identify: Classification
Importance of
standardization
Career prospects:
Engineer,Draftsman,Designer
Standardization
(SIRIM,ANSI,BS )
State agencies related
1.2 Defination and
importance of ED
Level 1
Define Engineering Drawing
Relate the importance of ED
- as a basis for higher
learning
- career opportunities
- Compare ED with
fine arts
Level 1
1.3 Types of ED
Explain different types of ED on
charts
Geometrical Drawing
( Plane and Solid )
Explain and differentiate
Geometrical Drawing to other
related drawings
Related Drawing
Civil,Mechanical,Electrical
Level 1
1.4 Equipment and
Materials
Identify drawing equipment and
related materials
Practices organizing drawing
equipment and materials
Use drawing equipment and
materials safely and accurately
1.5 Setting up
drawing
Paper
Level 1
Set up drawing paper on
drawing board
Prepare border lines and title
block.
Accurate setting
Identify related careers to
Engineering Drawing
Search in newspaper
1.6 Careers
ANNUAL PLAN OF FORM 4 ENGINEERING DRAWING 2011
UNIT 2 : SKETCHING
WEEKLY/MONTHLY
Week 4
LEARNING AREA
LEARNING OUTCOMES
CONTENT/SKILLS.
2.1 Principle of
Sketching
Level 1
Explain principles of sketching
2.2 Sketching
Techniques
Level 1
Sketch straight
lines,circles,arcs,curves and
shapes correctly
Correct techniques of
sketching
- straight line
- circle
- arc line
- curve line
2.3 Techniques in
determining Proportion
Level1
Determines Sketching
Proportions correctly
Correct methods of
making estimation of
proportional
2.4 Types of Sketches
Level 1
Identify type of sketches
- Orthographic Projection
- Isometric
- Oblique
- Perspective
23 Jan. – 27 Jan.
UNIT 3 : LINES AND LETTERING
WEEKLY/MONTHLY
Week 5
LEARNING AREA
LEARNING OUTCOMES
3.1 Alphabet of lines
Level 1
Identify alphabet of lines and their
application in ED
Object line,Hidden line,Centre
line,Border line,Construction
line,Projection line.
3.2 Characteristics of
Alphabet of lines
Level 1
Identify and apply correct
characteristics of Alphabets of
lines:
Shapes,Line
Darkness,application
3.3 Types of lines
Level 1
Draw vertical,horizontal,inclined
and perpendicular lines with
uniform darkness an thickness
Level 1
Identify Shapes of letters
30 Jan. – 3 Feb
3.4 Types of Lettering
CONTENT/SKILLS.
Using Mechanical
Pencils
Upright and inclined lettering
Guidelines,spacing
ANNUAL PLAN OF FORM 4 ENGINEERING DRAWING 2011
UNIT 4 : GEOMETRY
WEEKLY/MONTHLY
LEARNING AREA
Week 6- Week 15
4.1 Graphic elements
Level 1
Explain basic concepts of
points,line and plane
4.2 Lines
Level 1
Construct various types of lines
- Parallel line
- Perpendicular lines
6 Feb – 21 April
LEARNING OUTCOMES
Devide lines as stated:
- bisect a line
- into equal division
- according to give ratio
4.3 Angles
4.4 Triangles
Level 1
- Identify and construct various
type of angles
-dividing angles into equal parts
Level 1
Identify type and characteristics
of triangles:
- Equilateral
- Isosceles
- right triangle
- Scalene
Construct triangles based on
given criateria:
- three sides
- two sides and one angle
- two sides and one included
angle
- two sides and base angle
- base and two base angles
Level 2
Construct triangles based on
given criteria :
- Perimeter and side proportion
- Right angle,hypotenuse and
and one side
- Base,one angle and vertex
angle
- Base,vertex angle and height
- Perimeter, height and vertex
Angle.
CONTENT/SKILLS.
Devide lines using
geometrical methods
Construct angle using
geometrical methods
Construct triangles using
geometrical methods
Given side,height and
included angle
Construct triangles using
geometrical methods
Level 3
Construct triangles based on :
Construct triangle using
- three medians
WEEKLY/MONTHLY
Week 6 - Week15
LEARNING AREA
4.5 Quadrilaterals
6 Feb – 21 April
LEARNING OUTCOMES
geometrical methods
CONTENT/SKILLS.
Level 1
* Identify types and
Characteristics of
Quadrilaterals :
Square,Rectangle,Parallelogram
Rhombus,Trapezium,Kite Shape
Construct quadrilaterals
using geometrical
methods
* Construct square and rectangle
based on given criateria :
- Sides
- Diagonal
*Construct parallelogram with
two adjacent sides given:
- Included angles
- Diagonal
* Construct Rhombus based on
given criteria :
- Sides
- Angles
Level 1
4.6 Polygons
* Identify types of:
- Regular Polygon
- Irregular Polygon
Construct polygons using
geometrical methods
* Construct regular pentagon
Based on given criteria :
- Sides
- Circumscribed Circle
* Construct regular hexagon
Based on given criteria:
- Sides
- Distance across flats
- Distance across corners
Level 1
4.7 Scale
* Identify types of scale:
- common scale
- Diagonal scale
Student knows how to
measure using scale ruler
* Mention scale by :
- Ratio
- Fraction
- Statement
Level 2
* Apply scale ruler technique
Correctly based on certain
Ratio
WEEKLY/MONTHLY
LEARNING AREA
LEARNING OUTCOMES
CONTENT/SKILLS.
Week 6- Week 15
4.8 Reduction and
Enlargement
6 Feb – 21 April
Level 1
* Explain the concept of
Reduction and enlargement
* Differentiate reduction or
Enlargement of side ratio and
Area ratio
Methods to construct:
- correct ratio
- perpendicular line
- two semi-circle
- two parallel line
- transmit line
* Construct reduced or enlarged
Plane diagram with:
- side ratio given.
Level 2
* Construct reduced or enlarged
Plane diagram with given:
- side ratio given
4.9 Figures of Equal
Area
Level 1
* Explain the concept of equal
Area.
Concept of area in
transformation stage
* Identify diagrammatic
Transformation of shape of
Equal area.
* Construct various diagram of
Equal area
- Polygon to triangle
- Triangle to rectangle
- Rectangle to square
Level 2
* Construct various diagrams of
Equal area :
- Triangle to triangle with one
Side given
- Quadrilateral to quadrilateral
With one side given
Concept of area in
transformation stage
* Develop sequential
Transformation of polygon to
Square.
4.10 Circles
Level 1
* Identify terms and
Characteristics of circles
* Determine centre of circle or
Arcs using two chords.
Two cords method
* Construct circles or arcs
Based on given criteria :
- Radius
- Diameter
- 3 points
WEEKLY/MONTHLY
LEARNING AREA
LEARNING OUTCOMES
CONTENT/SKILLS.
Week 6 - Week 15
4.11 Ellipse and
Parabola
6 Feb – 21 April
4.12 Tangents
Level 1
* Identify the characteristics of
Ellipse and Parabola
Major axis and minor axis
For Ellipse
* Construct Ellipse using
Concentric circle method
Vertex and axis of symmetry
for Parabola
* Construct Parabola using
Rectangular method.
Draw ellipse using
Concentric circle method
* Identify the differences
Ellipse and Parabola
Draw Parabola using the
Rectangle Method
Level 1
* Explain the concepts and
Characteristics of tangency
Normal line
Point of tangency
- Tangent between line and
circle
- Tangent between circle and
another circle.
Level 2
* Determine the tangent point:
Apply concepts and
characteristics of tangent
- Between circle and line
- Between two lines and circle
- Between a line and two
circles ( inside and outside )
- Between two circles inside or
outside
- Between a straight line and
two circles inside or outside
* Consruct a line tangential to:
- A point on the circumference
of a circle
- A point outside a circle
* Construct a circle tangential to
- A line given the radius of the
circle
- Two lines given the radius of
the circles.
* Construct a circle tangential to:
- another circle and tangential
to the outerside of it.
- another circle and tangential
to the innerside of it
- two other circles and
Tangential to both on the
Inner side of them
- Two other circles and
tangential to both on the
outer side of them
Level 3
* Construct a circle tangential to:
- another circle that comes into
Contact through the given point
- another circle that comes into
- Contact outside and given point
ANNUAL PLAN OF FORM 4 ENGINEERING DRAWING 2011
UNIT 5 : COMPUTER AIDED DRAFTING (CAD) 1
WEEKLY/MONTHLY
Week 16- Week 17
LEARNING AREA
5.1 Introduction to
CAD
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
* Define CAD
24 April – 5 May
* Identify the facilities of CAD
System
Mid-Year Exam
10/5/11 – 26/5/11
* Explain advantages and
Disadvantages of CAD
Compare to the conventional
Method
5.2 AutoCAD Software
Commands
management
Level 1
* Using drawing file commands
- new
- open
- limit
- qsave
* Using AutoCAD software
Commands
a. Drawing
- Line
- Circle
- Erase
b. Modify
- Erase
- Trim
c. Osnap
- tangent
- Center
- Perpendicular
- Mid
- Other Osnap commands
5.3 AutoCAD
Application in
producing simple
plane diagram
Level 2
* Construct simple plane
Diagram using familiarized
Command
ANNUAL PLAN OF FORM 4 ENGINEERING DRAWING 2011
UNIT 6 : ORTHOGRAPHIC PROJECTION
WEEKLY/MONTHLY
LEARNING AREA
LEARNING OUTCOMES
CONTENT/SKILLS.
Week 18- Week 21
8 May. – 16 Jun.
6.1 Concepts and
Symbols of First
And Third Angle
Projection
Level 1
6.2 Principles of
Quadrants in the
First and Third Angle
Projections
Level 2
6.3 Construction of third
Angle Orthographic
Projection
6.4 Dimensioning of
Orthographic
Projection
* Explain concepts and symbols
of first and third angle
projection
* Explain principle of quadrants
In the first angle and third angle
projections
Level 1
* Construct third-angle orthographic
Projection of geometrical solids
As follows;
- solid flat surfaces only
- solid inclined surface
- solid circle surface
Object viewed at right
angle and projected on to
a perpendicular plane
Reference plane
- vertical plane
- horizontal plane
Practical approach and
widely used
Level 1
* Explain the concept of
Dimensioning in orthographic
Projections:
- Undirectional system
- Aligned system
* Use extended line dimensioning
Line, arrow head and leaders as
In standard guidelines
* Identify types of dimensioning:
-size
- location
- radius
- circle
- angle
- text
Level 2
Apply dimensioning techniques
on Orthographic Projection
Drawing.
6.5 Application of
Orthographic
Projection in
engineering
Level 2
* Apply orthographic projection
In engineering
ANNUAL PLAN OF FORM 4 ENGINEERING DRAWING 2011
UNIT 7 : ADDITIONAL VIEWS
WEEKLY/MONTHLY
Week 22- Week 25
19 Jun – 14 July
LEARNING AREA
7.1 Concepts of
Additional View
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
* Explain the concepts of Additional
View
An extension of the
orthographic projection
* Differentiate between additional
View and Orthograpcic
Projection.
7.2Types of additional
views
Level 2
* Explain different types of
Additional views
- Auxiliary view
- Revolved view
7.3 Construction of
Auxiliary Views
Level 2
* Construct Auxiliary Views for
Geometrical Solid based on:
- Auxiliary views of height
- Auxiliary views of width
- Auxiliary views of depth
* Use Auxiliary View to determine
- True length
- True angle
- True shape
7.4 Application of
Auxiliary Views
In Engineering
Plane inclined to the
vertical plane
@ parallel to the surface
to be shown true
Projection line
perpendicular to the
auxiliary plane
Level 2
Usage of Auxiliary Views in
Engineering
ANNUAL PLAN OF FORM 4 ENGINEERING DRAWING 2011
UNIT 8 : ISOMETRIC DRAWING
WEEKLY/MONTHLY
Week 26 - Week 29
17 July – 11 August.
August Std. Test
1 week
LEARNING AREA
8.1 Concepts of
Isometric Drawing
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
* Explain the concepts of isometric:
- Normal axis
- horizontal axis
- reversed axis
Another pictorial drawing
which 3D objects/solids to
represented
* Identify isometric drawing
Characteristics:
- isometric line
- non-isometric line
- angle in isometric
- circle in isometric
- curve in isometric
8.2 Construction of
Isometric drawing
on Normal Axis
Level 1
* Construct isometric Drawing of
Geometrical solid
- Box Method
-Frame method
* construct isometric circles by fourCentre method
* Construct curves in isometric
Plane by coordinate Method
* Construct isometric drawing of
Geometrical solids of surfaces
- Flat
- Inclined
- Rounded
Level 2
* Construct Isometric drawing of
Geometrical Solid having:
- Oblique surface
- curved surface
8.3 Dimensioning of
Isometric Drawing
Level 1
Dimension Isometric drawing
8.4 Application of
Isometric drawing
In engineering
field
Level
* Construct isometric drawing
Which include exploded -view
Isometric drawing for objects
Or components of various
Engineering field.
Direction of views,axis
and method to construct
ANNUAL PLAN OF FORM 4 ENGINEERING DRAWING 2011
UNIT 9 : OBLIQUE DRAWING
WEEKLY/MONTHLY
LEARNING AREA
Week 30 – Week 32
9.1 Concepts of Oblique
Drawing
LEARNING OUTCOMES
CONTENT/SKILLS.
Level 1
14 August.- 15 Sept.
Identify :
-
oblique axis
receding axis
horinzontal axis
vertical axis
Explain concepts of circles,arcs
Axis in oblique
drawing
and curves in Oblique Drawing.
Week 33 – Week 34
18 Sept. –29 Sept.
Identify characteristics of Oblique
Drawing
- oblique lines
- non-oblique lines
- angles in oblique
- circles in oblique
- arcs in oblique
Revision / End of
Year Examination
Week 35 – 36
9.2 Types of Oblique
Drawing
AutoCAD class
preparation for
Engineering Drawing
assignment work
2012
Identify types of Oblique Drawing:
- Common Oblique
- Cavalier Oblique
- Cabinet Oblique
9.3 Selection of
Orientation
of Oblique Drawing
Week 37-38
Revision for End of
Year Examanition
2011 form 4
Level 1
Types of oblique
drawing
Level 2
Select the best orinntation to
produce Oblique Drawing
Orientation of oblique
drawing
Level 1
9.4 Constructions Of
Oblique Drawing.
c. Box Method
d. Frame Method
Construct Oblique Drawing of
geometrical solids by:
- Box Method
- Frame Method
Level 2
Construct oblique
drawing
Draw circles on Oblique Axis:
- Four-center method
- Coordinate Method
Level 1
9.5 Dimensioning of
Oblique Drawing
Dimensioning of Oblique Drawing
9.6 Application of
Oblique
Drawing in
Engineering
Level 2
Apply Oblique Drawing for
objects or components from
various engineering sectors.
ANNUAL PLAN OF FORM 5 ENGINEERING DRAWING 2010
2010 SPM EXCELLENCE PROGRAMME
WEEKLY/MONTHLY
LEARNING AREA
Week 5
27 Jan - 8 Feb
1.
TOV Standard Test
Preparation
2.
3.
4.
5.
6.
7.
8.
9.
Line,angle,triangles,
square,quadrilaterals,
and polygons
Reduction and
enlargement
Figure of equal area
Circles
Ellipse and parabola
Tangents
Orthographic projection
Isometric drawing
Additional View
LEARNING OUTCOMES
Student are advice to determine
their strength and weakness in
every topic and must tried to
overcome it.
CONTENT/SKILLS.
Student will be given
several sets of SPM
formatted question
consists of every topic
for intensive exercise
drawing
10. Perspective drawing
Week 19 - 20
16 May - 27 May
Mid- Year Exam
Preparation
All the topic stated above +
Intersection
Student will be given
several sets of SPM
formatted question
consists of every topic
for intensive exercise
All topic of Form 4 and Form 5
Week 27 - 29
7 August – 21 August
Seminar on how to produce
good answer and gain maximum
mark for every expect detailed in
marking.
Phase 1 – 7/8/10
Phase II - 14/8/10
Phase III -21/8/10
Week 32-33
12 Sept – 23 Sept
All topic stated above +
development
SPM Trial
Preparation
All topic of Form 4 and Form 5
Week 34- 41
Intensive Exercise
SPM Preparation
Final touch on every topic and
narrowing certain topic
Ambang SPM 2010
Student are advice to determine
their strength and weakness in
every topic and must tried to
overcome it.
Student will be given
several sets of SPM
formatted question
consists of every topic
for intensive exercise