Publications for Keith Case
Case, K and 123. Mohamaddan, S (Accepted for publication) Crowd simulation: A video
observation and agent-based modelling approach, International Journal of the Digital
Human.
Hussain, A, Case, K, Marshall, R, Summerskill, S (2016) Joint mobility and inclusive
design challenges, International Journal of Industrial Ergonomics, 53, pp.67-79, ISSN:
0169-8141. DOI: 10.1016/j.ergon.2015.10.001.
Case, K, Marshall, R, Summerskill, SJ (Accepted for publication) Digital human
modelling over four decades, International Journal of the Digital Human.
Rifai, AP, Dawal, SZM, Zuhdi, A, Aoyama, H, Case, K (2016) Reentrant FMS
scheduling in loop layout with consideration of multi loading-unloading stations and
shortcuts, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING
TECHNOLOGY, 82(9-12), pp.1527-1545, ISSN: 0268-3768. DOI: 10.1007/s00170-0157395-5.
Lee, MJ, Case, K, Marshall, R (2016) Product lifecycle optimisation of car climate
controls using analytical hierarchical process (AHP) analysis and a multi-objective
grouping genetic algorithm (MOGGA), Journal of Engineering Science and Technology,
11(1), pp.1-17, ISSN: 1823-4690.
Case, K, Hussain, A, Marshall, R, Summerskill, SJ (2016) Using ergonomic risk
assessment methods for designing inclusive work practices – a case study, Human
Factors in Manufacturing & Service Industries.
Case, K and Osborne, WD (2015) XIX Corps Camp Commandant. The Great War Diary
of Colonel Alexander Weston Jarvis. Volume II. The Western Front 1917-1919., Salient
Books, ISBN: 9780957445970. Full text: http://www.salientbooks.co.uk/ .
Shahida, MSN, Zawiah, MDS, Case, K (2015) The relationship between anthropometry
and hand grip strength among elderly Malaysians, INTERNATIONAL JOURNAL OF
INDUSTRIAL ERGONOMICS, 50, pp.17-25, ISSN: 0169-8141. DOI:
10.1016/j.ergon.2015.09.006.
Case, K, Hussain, A, Marshall, R, Summerskill, SJ, Gyi, DE (2015) Digital human
modelling and the ageing workforce, Procedia Manufacturing, 3, pp.3694-3701, ISSN:
1877-7058.
Mohamaddan, S, Syed Shazali, ST, Zainal Abidin, AS, Case, K (2015) Human
movement representation in virtual environment using gaming software, Jurnal
Teknologi (Sciences and Engineering), 77(27), pp.77-81, ISSN: 2180-3722.
Mat, S, Case, K, Mohamaddan, S (2015) Employee motivation and learning behaviours
in Malaysian manufacturing industries. In Newnes, L, Nassehi, A, Dhokia, V (ed)
Thirteenth International Conference on Manufacturing Research (ICMR 2015),
Advances in Manufacturing Technology XXIX, University of Bath.
Case, K and Hussein, A (2015) The ageing workforce: A case study. In Newnes, L,
Nassehi, A, Dhokia, V (ed) Thirteenth International Conference on Manufacturing
Research (ICMR 2015), Advances in Manufacturing Technology XXIX, University of
Bath, pp.183-188.
Nguyen, H-T, Dawal, SZM, Nukman, Y, Aoyama, H, Case, K (2015) An Integrated
Approach of Fuzzy Linguistic Preference Based AHP and Fuzzy COPRAS for Machine
Tool Evaluation, PLOS ONE, 10(9), ISSN: 1932-6203. DOI:
10.1371/journal.pone.0133599.
Case, K, Hussain, A, Marshall, R, Summerskill, SJ, Gyi, DE (2015) Digital human
modelling and the ageing workforce. In Ahram, T, Karwowski, W, Schmorrow, D (ed)
6th International Conference on Applied Human Factors and Ergonomics AHFE 2015
and the Affiliated Conferences, Caesar's Palace, Las Vegas, USA, pp.701-708, ISBN:
978-1-4951-6042-4.
Osman Zahid, MN, Case, K, Watts, D (2015) End mill tools integration in CNC
machining for rapid manufacturing processes: simulation studies, Production &
Manufacturing Research, 3(1), pp.274-288, DOI: 10.1080/21693277.2015.1094756.
Mohamaddan, S, Shazali, STS, Abidin, ASZ, Case, K (2015) Human movement
representation in virtual environment using gaming software. In , Jurnal Teknologi,
pp.77-81, DOI: 10.11113/jt.v77.6894.
Hussain, A, Ahmad, A, Case, K (2015) Inclusive design drivers and barriers – a
manufacturing perspective from Pakistan, Production & Manufacturing Research, 3(1),
pp.289-309, DOI: 10.1080/21693277.2015.1094757.
Marshall, R, Cook, S, Mitchell, VA, Summerskill, S, Haines, V, Maguire, M, Sims, R,
Gyi, D, Case, K (2015) Design and Evaluation: End Users, User Datasets and
Personas, Applied Ergonomics, 46, pp.311-317, DOI: 10.1016/j.apergo.2013.03.008.
Dawal, SZ, Tahriri, F, Jen, YH, Case, K, Tho, NH, Zuhdi, A, Mousavi, M, Amindoust, A,
Sakudarini, N (Accepted for publication) Empirical evidence of AMT practices and
sustainable environmental initiatives in Malaysian automotive SMEs, International
Journal of Precision Engineering and Manufacturing, 16(6), pp.1-10, ISSN: 1229-8557.
Hassan, MK, Hussain, A, Ali, H, Noor, F, Kamran, MS, Hassan, W, Case, K (Accepted
for publication) Organizational Safety Climate - A Case Study of Comparing Two
OHSAS Certified Food Processing Plants, Technical Journal, Journal of University of
Engineering & Technology (UET) Taxila, Pakistan, 20(II), pp.19-26, ISSN: 1813-1786.
Full text: http://web.uettaxila.edu.pk/techJournal .
Thorvald, P, Högberg, D, Case, K (2014) The effect of information mobility on
production quality, International Journal of Computer Integrated Manufacturing, 27(2),
pp.120-128, ISSN: 0951-192X. DOI: 10.1080/0951192X.2013.800236.
Mohamaddan, S, Case, K, Abidin, ASZ (2014) A Video-based observation and analysis
method to assess human movement and behaviour in crowded areas, World Academy
of Science, Engineering and Technology, International Journal of Computer,
Information, Systems and Control Engineering, 8(11), pp.1654-1657.
Mat, S, Case, K, Goh, YM (2014) Motivational and learning behaviour between skilled
and un-skilled workers: A pilot case study. In Rehman, F, Woodfine, N, Marasini, R (ed)
12th International Conference on Manufacturing Research, Advances in Manufacturing
Technology XXVIII, Southampton Solent University, UK, pp.183-188, ISBN: 978-09926958-4-2.
Osman Zahid, MN, Case, K, Watts, D (2014) Cutting tools in finishing operations for
CNC rapid manufacturing processes: Simulation studies. In Rehman, F, Woodfine, N,
Marasini, R (ed) Twelfth International Conference on Manufacturing Research
(ICMR2014), Advances in Manufacturing Technology XXVIII, Southampton Solent
University, pp.163-168, ISBN: 978-0-9926958-4-2.
Hussain, A, Ahmad, A, Case, K, Clarkson, PJ, Masood, T, Anwat, SK (2014)
Manufacturer's perspective on inclusive design drivers and barriers - developing
countries case. In Rehman, F, Woodfine, N, Marasini, R (ed) Twelfth International
Conference on Manufacturing Research (ICMR2014), Advances in Manufacturing
Technology XXVIII, Southampton Solent University, UK, pp.15-20, ISBN: 978-09926958-4-2.
Hussein, A, Case, K, Chatha, KA, Imran, S, Imran, M, Masood, T (2014) Organizational
design: Need for a socio-technical inclusive system design approach to meet 21st
century workforce challenges. In Advances in Social and Organizational Factors, CRC
Press, pp.441-449, ISBN: 978-1-4951-2102-9.
Osman Zahid, MN, Case, K, Watts, DM (2014) Optimization of roughing operations in
CNC machining for rapid manufacturing processes, Production & Manufacturing
Research, 2(1), pp.519-529, DOI: 10.1080/21693277.2014.938277.
Hussein, A, Case, K, Chatha, KA, Imran, S, Imran, M, Masood, T (2014) Organizational
design: Need for a socio-technical inclusive system design approach to meet 21st
century workforce challenges. In Ahram, T, Karwowski, W, Marek, T (ed) Fifth
International Conference on Applied Human Factors and Ergonomics AHFE 2014,
Jagiellonian University, Kraków, Poland, pp.8205-8213.
Osman Zahid, MN, Case, K, Watts, D (2014) Cutting Tools in Finishing Operations for
CNC Rapid Manufacturing Processes: Experimental Studies, International Journal of
Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8(6), pp.66-70.
Usman, Z, Young, RIM, Chungoora, N, Palmer, C, Case, K, Harding, JA (2013)
Towards a formal manufacturing reference ontology, International Journal of Production
Research, 51(22), pp.6553-6572, ISSN: 0020-7543. DOI:
10.1080/00207543.2013.801570.
Anjum, N, Harding, J, Young, R, Case, K, Usman, Z, Changoora, T (2013) Verification
of knowledge shared across design and manufacture using a foundation ontology,
International Journal of Production Research, 51(22), pp.6534-6552, ISSN: 0020-7543.
DOI: 10.1080/00207543.2013.798051.
Marshall, R and Case, K (2013) SAMMIE, SAMMIE CAD Ltd.
Hussain, A, Case, K, Marshall, R, Summerskill, S (2013) An Inclusive Design Method
for Addressing Human Variability and Work Performance Issues, International Journal
of Engineering and Technology Innovation, 3(3), pp.144-155.
Palmer, C, Chungoora, N, Young, RIM, Gunendran, AG, Usman, Z, Case, K, Harding,
JA (2013) Exploiting unified modelling language (UML) as a preliminary design tool for
Common Logic-based ontologies in manufacturing, International Journal of Computer
Integrated Manufacturing, 26(3), pp.267-283, ISSN: 0951-192X. DOI:
10.1080/0951192X.2012.688142.
Chungoora, N, Cutting-Decelle, A-F, Young, RIM, Gunendran, G, Usman, Z, Harding,
JA, Case, K (2013) Towards the ontology-based consolidation of production-centric
standards, International Journal of Production Research, 51(2), pp.327-345, ISSN:
0020-7543. DOI: 10.1080/00207543.2011.627885.
Case, K (2013) Tools for User-Centred Design, Advanced Engineering Forum, 10,
pp.28-33, DOI: 10.4028/www.scientific.net/AEF.10.28.
Shazali, STS, Cheong, WL, Johan, HM, Mohammadan, S, Kamaruddin, AMNA, Osman,
MS, Case, K (2013) Real-time periodic motion detection and background estimation,
International Journal of Design and Innovation, 1, pp.39-47.
Osborne, WD and Case, K (2013) Instructional factories and training courses: The
inception and implementation of training courses for un-skilled and semi-skilled
munitions workers during the Great War. In Shehab, W, Ball, P, Tjahjono, B (ed)
Eleventh International Conference on Manufacturing Research, Advances in
Manufacturing Technology XXVII, Cranfield University, UK, pp.331-336, ISBN:
9781907413230.
Mohamaddan, S and Case, K (2013) Simulation of human movement and behaviour in
crowded spaces using gaming software. In Shehab, E, Ball, P, Tjahjono, B (ed) 11th
International Conference on Manufacturing Research, Cranfield University, UK, pp.127132, ISBN: 9781907413230.
Sanchez, A, Mat, S, Goh, YM, Case, K (2013) Human variability, task complexity and
motivation contribution in manufacturing. In Shehab, E, Ball, P, Tjahjono, B (ed)
Eleventh International Conference on Manufacturing Research, Advances in
Manufacturing Technology XXVII, Cranfield, UK, pp.325-330, ISBN: 9781907413230.
Osman-Zahid, MN, Case, K, Watts, D (2013) Optimisation of roughing operations in
CNC machining for rapid manufacturing processes. In Shehab, E, Ball, P, Tjahjono, B
(ed) Eleventh International Conference on Manufacturing Research, Advances in
Manufacturing Technology XXVII, Cranfield University, UK, pp.233-238, ISBN:
9781907413230.
Hussain, A, Case, K, Marshall, R, Summerskill, SJ (2013) Achieving workplace
inclusiveness by using ergonomics risk assessment. In Shehab, E, Ball, P, Tjahjono, B
(ed) Eleventh International Conference on Manufacturing Research, Advances in
Manufacturing Technology XXVII, Cranfield University, UK, pp.337-342, ISBN:
9781907413230.
Case, K (2013) Ergonomics applications in industries: Experience and perspectives
from the West. In Seminar on 'Ergonomics is Economics', Alor Setar, Malaysia, pp.1-59.
Case, K (2013) Human modelling. In Workshop on Manual Lifting Analysis and Digital
Human Modelling in Workstation Design, Second International Conference on
Ergonomics, ICE2013, Kuala Lumpur, Malaysia, pp.1-112.
Case, K (2013) Tools for user-centred design. In Second International Conference on
Ergonomic, ICE2013, 'Future Human Centred Design', Proceedings of the Second
International Conference on Ergonomics, ICE2013, Kuala Lumpur, Malaysia, pp.1-6.
Chungoora, N, Young, RI, Palmer, C, Usman, Z, Anjum, NA, Harding, JA, Case, K,
Gunendran, G, Cutting-Decelle, A-F (2013) A model-driven ontology approach for
manufacturing system interoperability and knowledge sharing, Computers in Industry,
ISSN: 0166-3615. DOI: 10.1016/j.compind.2013.01.003.
Chungoora, N, Gunendran, GA, Young, RIM, Usman, Z, Anjum, NA, Palmer, C,
Harding, JA, Case, K, Cutting-Decelle, A-F (2012) Extending product lifecycle
management for manufacturing knowledge sharing, Proceedings of the Institution of
Mechanical Engineers Part B: Journal of Engineering Manufacture, 226(A12), pp.20472063, ISSN: 0954-4054. DOI: 10.1177/0954405412461741.
Anjum, N, Harding, JA, Young, RIM, Case, K (2012) Manufacturability verification
through feature-based ontological product models, Proceedings of the Institution of
Mechanical Engineers Part B: Journal of Engineering Manufacture, 226(B6), pp.10861098, ISSN: 0954-4054. DOI: 10.1177/0954405412437125.
Sims, RE, Marshall, R, Summerskill, SJ, Gyi, DE, Case, K (2012) Supporting older and
disabled people’s needs in product, environment and service design, International
Journal of Business, Humanities & Technology, 2(2), pp.212-220.
Sims, RE, Gyi, DE, Marshall, R, Case, K (2012) Activities of daily life still cause
problems for many older and physically impaired people, Design for All Institute of India,
7(7), pp.165-181.
Case, K and Osborne, WD (2012) A Great War Sharpshooter. Volume I Norfolk, Egypt
and Gallipoli, 1914-1916, Salient Books, ISBN: 9780957445925.
Case, K (2012) User centred design. In Invited Lecture, University of Malaya, Malaysia,
pp.1-1.
Mohamaddan, S and Case, K (2012) Human behaviour simulation using gaming
software based on video observation analysis. In International Conference in
Humanities, Social Sciences and Technology, ICHSST 2012, Proceedings of the
International Conference in Humanities, Social Sciences and Technology, ICHSST
2012, Cardiff, UK, pp.1-8.
Thorvald, P, Case, K, Hogberg, D (2012) Applying cognitive science to digital human
modelling for user centred design, International Journal of Human Factors Modelling
and Simulation, 3(1), pp.90-106.
Hussain, A, Marshall, R, Summerskill, SJ, Case, K (2012) Workforce diversity and
ergonomics challenges for sustainable manufacturing organisations. In Trzcielinski, S
and Karwowski, W (ed) Fourth International Conference on Applied Human Factors and
Ergonomics, AHFE 2012, 'Advances in Ergonomics in Manufacturing’, the Proceedings
of the Fourth International Conference on Applied Human Factors and Ergonomics,
AHFE 2012, San Francisco, USA, pp.23-32, ISBN: 978-0-9796435-5-2.
Thorvald, P, Bäckstrand, G, Högberg, D, Case, K (2012) Syntax and sequencing of
assembly instructions. In Rebelo, F and Soares, MM (ed) Fourth International
Conference on Applied Human Factors and Ergonomics, AHFE 2012, 'Advances in
Usability Evaluation Part II', Proceedings of the Fourth International Conference on
Applied Human Factors and Ergonomics, AHFE 2012, San Francisco, USA, pp.266275, ISBN: 978-0-9796435-5-2.
Brolin, A, Bäckstrand, G, Högberg, D, Thorvald, P, Case, K (2012) Kitting as an
information source in manual assembly. In Trzcielinski, S and Karwowski, W (ed) Fourth
International Conference on Applied Human Factors and Ergonomics, AHFE 2012,
'Advances in Ergonomics in Manufacturing', the Proceedings of the Fourth International
Conference on Applied Human Factors and Ergonomics, AHFE 2012, San Francisco,
USA, pp.346-353, ISBN: 978-0-9796435-5-2.
Osborne, WD and Case, K (2012) The welfare supervisor: Lessons for the modern day
from improvements of conditions for female munitions workers during the Great War. In
Baines, TS, Clegg, BT, Harrison, DK (ed) 'Advances in Manufacturing Technology
XXVI', the Proceedings of the Tenth International Conference on Manufacturing
Research, ICMR 2012, Aston University, Birmingham, UK, pp.249-254, ISBN:
9781905866601.
Hussain, A, Case, K, Summerskill, SJ, Marshall, R (2012) Addressing human variability
and work performance through an inclusive design method. In Baines, TS, Clegg, BT,
Harrison, DK (ed) Tenth International Conference on Manufacturing Research, ICMR
2012, 'Advances in Manufacturing Technology XXVI', the Proceedings of the Tenth
International Conference on Manufacturing Research, ICMR 2012, Aston University,
Birmingham, UK, pp.243-248, ISBN: 9781905866601.
Mohamaddan, S and Case, K (2012) Towards understanding of human behaviour in
crowded spaces. In Baines, TS, Clegg, BT, Harrison, DK (ed) Tenth International
Conference on Manufacturing Research, ICMR 2012, 'Advances in Manufacturing
Technology XXVI', the Proceedings of the Tenth International Conference on
Manufacturing Research, ICMR 2012, Aston University, Birmingham, UK, pp.637-642,
ISBN: 9781905866601.
Mohamaddan, S and Case, K (2012) Agent-based modelling and simulation through
video observation analysis. In Kahraman, C, Kerre, EE, Bozbura, FT (ed) Tenth
International FLINS Conference, World Scientific Proceedings Series on Computer
Engineering and Information Science: Volume 7, 'Uncertainty Modeling in Knowledge
Engineering and Decision Making', the Proceedings of the Tenth International FLINS
Conference, Istanbul, Turkey, pp.412-417, ISBN: 9789814417730.
Sims, RE, Marshall, R, Gyi, DE, Summerskill, SJ, Case, K (2012) Collection of
anthropometry from older and physically impaired persons: Traditional methods versus
TC 2 3-D body scanner, International Journal of Industrial Ergonomics, 42(1), pp.65-72,
ISSN: 0169-8141. DOI: 10.1016/j.ergon.2011.10.002.
Anjum, NA, Harding, JA, Young, RI, Case, K (2012) Mediation of foundation ontology
based knowledge sources, Computers in Industry, 63(5), pp.433-442, ISSN: 0166-3615.
DOI: 10.1016/j.compind.2012.01.009.
Sims, RE, Marshall, R, Summerskill, SJ, Case, K, Gyi, DE, Davis, P (2011) Involving
older and disabled people in assessment of product, environment and service designs,
Journal of Human Development, Disability and Social Change, 19(3), pp.25-35, ISSN:
1499-5549.
Case, K, Freebody, M, Mohammadan, S, Syed Shazali, ST (2011) Human behaviour
modelling using gaming software. In Harrison, DK, Wood, BM, Evans, D (ed) Ninth
International Conference on Manufacturing Research, ICMR 2011, 'Advances in
Manufacturing Technology XXV', the Proceedings of the Ninth International Conference
on Manufacturing Research, ICMR 2011, Glasgow Caledonian University, Glasgow,
UK, pp.31-36, ISBN: 978 1905866 56 4.
Osborne, WD and Case, K (2011) Lessons for modern manufacturing and supply from
the Great War. In Harrison, DK, Wood, BM, Evans, D (ed) Ninth International
Conference on Manufacturing Research, ICMR 2011, 'Advances in Manufacturing
Technology XXV', the Proceedings of the Ninth International Conference on
Manufacturing Research, ICMR 2011, Glasgow Caledonian University, Glasgow, UK,
pp.113-118, ISBN: 978 1905866 56 4.
Hussain, A, Case, K, Summerskill, SJ, Marshall, R (2011) Managing older workers, a
digital human modelling proactive design approach. In Harrison, DK, Wood, BM, Evans,
D (ed) Ninth International Conference on Manufacturing Research, ICMR 2011,
'Advances in Manufacturing Technology XXV', the Proceedings of the Ninth
International Conference on Manufacturing Research, ICMR 2011, Glasgow Caledonian
University, Glasgow, UK, pp.74-79, ISBN: 978 1905866 564.
Hussain, A, Case, K, Ghani, U, Summerskill, SJ, Marshall, R (2011) Workforce
demographics, challenges and strategies; A 'design for all' method in a manufacturing
industry perspective. In Harrison, DK, Wood, BM, Evans, D (ed) Ninth International
Conference on Manufacturing Research, ICMR 2011, 'Advances in Manufacturing
Technology XXV', the Proceedings of the Ninth International Conference on
Manufacturing Research, ICMR 2011, Glasgow Caledonian University, Glasgow, UK,
pp.80-86, ISBN: 978 1905866 56 4.
Young, RIM, Chungoora, N, Usman, Z, Anjum, NA, Gunendran, AG, Palmer, C,
Harding, JA, Case, K, Cutting-Decelle, A-F (2011) Reference ontologies for
manufacturing-based ecosystems. In Zelm, M, Johnson, P, Doumeingts, G, van
Sinderen, M (ed) Third International Working Conference on Enterprise Interoperability,
IWEI 2011, 'Enterprise Interoperability', the Proceedings of the Third International
Working Conference on Enterprise Interoperability, IWEI 2011, Stockholm, Sweden,
pp.61-72, ISBN: 9781848213173.
Shazali, STS, Cheong, WL, Mohammaddan, S, Kamaruddin, AMNA, Case, K (2011)
Motion detection using periodic background estimation subtraction method. In Seventh
International Conference on IT in Asia, CITA 2011, Proceedings of the Seventh
International Conference on IT in Asia, CITA 2011, University of Sarawak, Kuching,
Sarawak, Malaysia, pp.231-234, ISBN: 978-1-61284-128-1. DOI:
10.1109/CITA.2011.5999523.
Case, K, Hussain, A, Marshall, R, Summerskill, SJ, Sims, RE, Gyi, DE (2011)
Workforce ageing, the need for an inclusive design approach in manufacturing industry.
In Bártolo, H, Alves, N, Bártolo, PJ (ed) First International Conference on Sustainable
Intelligent Manufacturing, SIM 2011, Proceedings of the First International Conference
on Sustainable Intelligent Manufacturing, SIM 2011, Leiria. Portugal, pp.671-678, ISBN:
978-989-8481-03-0.
Usman, Z, Young, RIM, Chungoora, N, Palmer, C, Case, K, Harding, JA (2011) A
manufacturing core concepts ontology for product lifecycle interoperability. In Van
Sinderen, M and Johnson, P (ed) 3rd International IFIP Working Conference on
Enterprise Interoperability, IWEI 2011, 'Enterprise Interoperability', Lecture Notes in
Business Information Processing, the Proceedings of the Third International IFIP
Working Conference on Enterprise Interoperability, IWEI 2011, Royal Institute of
Technology, Stockholm, Sweden, pp.5-18, ISBN: 978-3-642-19679-9. DOI:
10.1007/978-3-642-19680-5_3.
Anjum, NA, Harding, JA, Young, RIM, Case, K (2011) Shape Feature-Based
Ontological Engineering Product Models. In Zelm, M, Johnson, P, Doumeingts, G, van
Sinderen, M (ed) Third International IFIP Working Conference on Enterprise
Interoperability, IWEI 2011, Enterprise Interoperability, Stockholm, Sweden, pp.223242, ISBN: 9781848213173.
Case, K (2011) Inclusive design using digital human modelling. In Invited Lecture,
University of Malaya, Malaysia, pp.1-1.
Cheong, WL, Syed Shazali, ST, Kamaruddin, AMNA, Mohammadan, S, Case, K (2011)
Emergency evacuation simulation development using game programming. In Fourth
Engineering Conference, ENCON 2011, Proceedings of the Fourth Engineering
Conference, ENCON 2011, University Malaysia Sarawak, Kuching, Sarawak, Malaysia,
pp.1-6.
Case, K, Hussain, A, Usman, Z, Marshall, R, Summerskill, SJ (2011) A more realistic
digital human modelling (DHM) approach to manufacturing industry. In International
Conference on Advanced Modeling and Simulation, ICAMS 2011, Proceedings of the
International Conference on Advanced Modeling and Simulation, ICAMS 2011,
Rawalpindi, Pakistan, pp.251-256.
Brolin, A, Bäckstrand, G, Högberg, D, Case, K (2011) Inadequate presented information
and its effect on the cognitive workload. In Geraghty, J and Young, P (ed) Twentyeighth International Manufacturing Conference, IMC 28, 'Manufacturing Sustainability',
the Proceedings of the Twenty-eighth International Manufacturing Conference, IMC 28,
Dublin City University, Dublin, Ireland, pp.121-129.
Brolin, A, Bäckstrand, G, Högberg, D, Case, K (2011) The use of kitting to ease
assemblers' cognitive workload. In Lindfors, J, Savolainen, M, Väyrynen, S (ed) Fortythird Annual Nordic Ergonomics Society Conference, 'Wellbeing and Innovations
through Ergonomics', the Proceedings of the Forty-third Annual Nordic Ergonomics
Society Conference, NES 2011, Oulu, Finland, pp.77-82.
Marshall, R, Case, K, Gyi, DE, Summerskill, SJ, Sims, RE (2011) Supporting an
inclusive, sustainable approach to design and manufacture. In Bártolo, H, Alves, N,
Bártolo, PJ (ed) First International Conference on Sustainable Intelligent Manufacturing,
SIM 2011, Proceedings of the First International Conference on Sustainable Intelligent
Manufacturing, SIM 2011, Leiria, Portugal, pp.697-704, ISBN: 978-989-8481-03-0.
Yusof, Y and Case, K (2010) Design of a STEP compliant system for turning
operations, Journal of Robotics and Computer-Integrated Manufacturing, 26(6), pp.753758, ISSN: 0736-5845. Full text: http://dx.doi.org/10.1016/j.rcim.2010.05.002. DOI:
10.1016/j.rcim.2010.05.002.
Lundström, D, Case, K, Högberg, D (2010) Anthropometric rigging for variable manikin
appearance. In Vitanov, VI and Harrison, DE (ed) Eighth International Conference on
Manufacturing Research, ICMR 2010, 'Advances in Manufacturing Technology XXIV',
the Proceedings of the Eighth International Conference on Manufacturing Research,
ICMR 2010, University of Durham, Durham, UK, pp.250-255, ISBN: 978 1 9058665 1 9.
Lee, MJ, Case, K, Marshall, R (2010) Exploring alternative product modularisations with
multi-objective optimisation. In Vitanov, VI and Harrison, D (ed) Eighth International
Conference on Manufacturing Research, ICMR 2010, 'Advances in Manufacturing
Technology XXIV', the Proceedings of the Eighth International Conference on
Manufacturing Research, ICMR 2010, University of Durham, Durham, UK, pp.244-259,
ISBN: 978 1 9058665 1 9.
Lee, KT and Case, K (2010) Rapid prototyping using conventional 3-axis milling. In
Vitanov, VI and Harrison, D (ed) Eighth International Conference on Manufacturing
Research, ICMR 2010, 'Advances in Manufacturing Technology XXIV', the Proceedings
of the Eighth International Conference on Manufacturing Research, ICMR 2010,
University of Durham, Durham, UK, pp.155-160, ISBN: 978 1 9058665 1 9.
Summerskill, SJ, Marshall, R, Case, K (2010) Potential improvements to the occupant
accommodation design process in vehicles using digital human modelling,, ISBN: 978 0
9796435 4 5.
Backstrand, G, Brolin, A, Hogberg, D, Case, K (2010) Supporting attention in manual
assembly and its influence on quality,USA Publishing, ISBN: 978 0 9796435 4 5.
Case, K, Nor, MA, Teoh, PC (2010) A diagnostic service tool using FMEA, International
Journal of Computer Integrated Manufacturing, 23(7), pp.640-654, Full text:
http://dx.doi.org/10.1080/0951192X.2010.486007. DOI:
10.1080/0951192X.2010.486007.
Marshall, R, Summerskill, SJ, Case, K, Gyi, DE, Sims, RE (2010) Development and
evaluation of task based digital human modelling for inclusive design,USA Publishing,
ISBN: 978 0 9796435 4 5.
Bäckstrand, G, Brolin, A, Högberg, D, Case, K (2010) Supporting attention in manual
assembly and its influence on quality. In Kaber, DB and Boy, GA (ed) Third International
Conference on Applied Human Factors and Ergonomics, AHFE 2010, 'Advances in
Cognitive Ergonomics', the Proceedings of the Third International Conference on
Applied Human Factors and Ergonomics, AHFE 2010, Miami, Florida, USA, pp.460469, ISBN: 978-1-4398-3491-6.
Backstrand, G, Brolin, A, Hogberg, D, Case, K (2010) Supporting attention in manual
assembly and its influence on quality,USA Publishing, ISBN: 978 0 9796435 4 5.
Summerskill, SJ, Marshall, R, Case, K (2010) Potential improvements to the occupant
accommodation design process in vehicles using digital human modelling. In Duffy, VG
(ed) Third International Conference on Applied Human Factors and Ergonomics, AHFE
2010, 'Advances in Applied Digital Human Modeling', the Proceedings of the Third
International Conference on Applied Human Factors and Ergonomics, AHFE 2010,
Miami, Florida, USA, pp.268-278, ISBN: 978 0 9796435 4 5.
Thorvald, P, Brolin, A, Högberg, D, Case, K (2010) Using mobile information sources to
increase productivity and quality. In Kaber, DB and Boy, GA (ed) Third International
Conference on Applied Human Factors and Ergonomics, AHFE 2010, 'Advances in
Cognitive Ergonomics', the Proceedings of the Third International Conference on
Applied Human Factors and Ergonomics, AHFE 2010, Miami, Florida, USA, pp.450459, ISBN: 978-1-4398-3491-6.
Thorvald, P, Hogberg, D, Case, K (2010) Using Mobile Information Sources to Increase
Productivity and Quality,USA Publishing.
Marshall, R, Case, K, Porter, JM, Summerskill, SJ, Gyi, DE, Davis, PM, Sims, RE
(2010) HADRIAN: a virtual approach to design for all, Journal of Engineering Design,
21(2&3), pp.253-273, ISSN: 0954-4828. DOI: 10.1080/09544820903317019.
Case, K and Osborne, WD (2010) A Boer War Sharpshooter, Salient Books, ISBN: 9780-9564439-1-5.
(2010) Application of Digital Human Modelling Tools in User Centred Design Processes,
International Journal of Human Factors Modelling and Simulation, 1(4), pp.353-355.
Marshall, R, Summerskill, SJ, Case, K, Gyi, DE, Sims, RE (2010) Development and
evaluation of task based digital human modelling for inclusive design. In Duffy, VG (ed)
Third International Conference on Applied Human Factors and Ergonomics, AHFE
2010, 'Advances in Applied Digital Human Modeling', the Proceedings of the Third
International Conference on Applied Human Factors and Ergonomics, AHFE 2010,
Miami, Florida, USA, pp.129-138, ISBN: 9781439835111.
Usman, Z, Young, RIM, Case, K, Harding, JA (2010) A manufacturing foundation
ontology for product life cycle interoperability. In Popplewell, K, Harding, JA, Poler, R,
Chalmeta, R (ed) International Conference on Interoperability for Enterprise Software
and Applications, I-ESA 2010, 'Enterprise Interoperability IV', the Proceedings of the
International Conference on Interoperability for Enterprise Software and Applications, IESA 2010, Coventry University, UK, pp.147-155, ISBN: 978-1-84996-256-8. DOI:
10.1007/978-1-84996-257-5_14.
Young, RIM, Chungoora, N, Usman, Z, Anjum, N, Gunendran, AG, Palmer, C, Harding,
JA, Case, K (2010) An exploration of foundation ontologies and verification methods for
manufacturing knowledge sharing. In Panetto, H and Boudjlida, N (ed) Workshop on
Interoperability for Enterprise Software and Applications, I-ESA 2010, 'Interoperability
for Enterprise Software and Applications', the Proceedings of the Workshops and
Doctorial Symposium of the I-ESA International Conference, Coventry University, UK,
pp.83-92, ISBN: 978-1-84821-270-1.
Anjum, NA, Harding, JA, Young, RIM, Case, K (2010) Gap analysis of ontology
mapping tools and techniques. In Popplewell, K, Harding, JA, Poler, R, Chalmeta, R
(ed) International Conference on Interoperability for Enterprise Software and
Applications, I-ESA 2010, 'Enterprise Interoperability IV', the Proceedings of the
International Conference on Interoperability for Enterprise Software and Applications, IESA 2010, Coventry University, UK, pp.303-312, ISBN: 978-1-84996-256-8. DOI:
10.1007/978-1-84996-257-5_28.
Summerskill, SJ, Marshall, R, Case, K, Gyi, DE, Sims, RE, Davis, P, Day, PN, Rohan,
C, Birnie, S (2010) Validation of the HADRIAN system using an ATM evaluation case
study, International Journal of Human Factors Modelling and Simulation, 1(4), pp.420432, ISSN: 1742-5557. DOI: 10.1504/IJHFMS.2010.040275.
Lee, MJ, Case, K, Marshall, R (2009) Product modularity: A multi-objective optimisation
approach. In Ceglarek, D (ed) Seventh International Conference on Manufacturing
Research, ICMR 2009, 'Advances in Manufacturing Technology XXIII', the Proceedings
of the Seventh International Conference on Manufacturing Research, ICMR 2009,
University of Warwick, UK, pp.107-112, ISBN: 978 0 9564439 3 9.
Case, K, Marshall, R, Högberg, D, Summerskill, SJ, Gyi, DE, Sims, RE (2009)
HADRIAN: Fitting trials by digital human modelling. In Duffy, VG (ed) Second
International Conference, ICDHM 2009, held as Part of HCI International 2009, 'Digital
Human Modeling', the Proceedings of the Second International Conference, ICDHM
2009, held as Part of HCI International 2009, San Diego, California, USA, pp.673-680,
ISBN: 978-3-642-02808-3. DOI: 10.1007/978-3-642-02809-0_71.
Case, K, Marshall, R, Högberg, D, Summerskill, SJ, Gyi, DE, Sims, RE (2009)
HADRIAN: Fitting trials by digital human modelling,Springer, ISBN: 978-3-642-02808-3.
Thorvald, P, Högberg, D, Case, K (2009) Incorporating cognitive aspects in digital
human modelling. In Duffy, VG (ed) Second International Conference on Digital Human
Modeling, ICDHM 2009, Held as Part of HCI International 2009, 'Digital Human
Modeling', the Proceedings of the Second International Conference on Digital Human
Modeling, ICDHM 2009, Held as Part of HCI International 2009, San Diego, California,
USA, pp.323-332, ISBN: 978 3 642 02884 7. DOI: 10.1007/978-3-642-02809-0_35.
Thorvald, P, Högberg, D, Case, K (2009) Incorporating Cognitive Aspects in Digital
Human Modelling,Springer Verlag, ISBN: 978 3 642 02884 7.
Marshall, R and Case, K (2009) SAMMIE, SAMMIE CAD Ltd..
Summerskill, SJ, Marshall, R, Case, K, Gyi, DE, Sims, RE, Davis, PM (2009) Validation
of the HADRIAN system using an ATM evaluation case study. In Duffy, VG (ed) Second
International Conference, ICDHM 2009, held as Part of HCI International 2009, 'Digital
Human Modeling', the Proceedings of the Second International Conference, ICDHM
2009, held as Part of HCI International 2009, San Diego, California, USA, pp.727-736,
ISBN: 978-3-642-02808-3. DOI: 10.1007/978-3-642-02809-0_77.
Summerskill, SJ, Marshall, R, Case, K, Gyi, DE, Sims, RE, Davis, PM (2009) Validation
of the HADRIAN system using an ATM evaluation case study,Springer, ISBN: 978-3642-02808-3.
Marshall, R, Case, K, Summerskill, SJ, Sims, RE, Gyi, DE, Davis, PM (2009) Virtual
task simulation for inclusive design. In Duffy, VG (ed) Second International Conference,
ICDHM 2009, held as Part of HCI International 2009, 'Digital Human Modeling', the
Proceedings of the Second International Conference, ICDHM 2009, held as Part of HCI
International 2009, San Diego, California, USA, pp.700-709, ISBN: 978-3-642-02808-3.
DOI: 10.1007/978-3-642-02809-0_74.
Marshall, R, Case, K, Summerskill, SJ, Sims, RE, Gyi, DE, Davis, PM (2009) Virtual
Task Simulation for Inclusive Design,Springer, ISBN: 978-3-642-02808-3.
Cochrane, SD, Young, RIM, Case, K, Harding, JA, Gao, J, Dani, S, Baxter, D (2009)
Manufacturing knowledge verification in design support systems, International Journal
of Production Research, 47(12), pp.3179-3204, ISSN: 1366-588X. Full text:
http://dx.doi.org/10.1080/00207540701802452. DOI: 10.1080/00207540701802452.
Marshall, R, Gyi, DE, Case, K, Porter, JM, Sims, RE, Summerskill, SJ, Davis, PM
(2009) A design ergonomics approach to accessibility and user needs in transport. In
Bust, PD (ed) Annual Conference of the Ergonomics Society, 2009, 'Contemporary
Ergonomics 2009', the Proceedings of the Annual Conference of the Ergonomics
Society, 2009, Royal College of Physicians, London, UK, pp.51-60, ISBN: 978-0-41580433-2. DOI: 10.1201/9780203872512.ch6.
Davis, PM, Marshall, R, Case, K, Porter, JM, Gyi, DE, Summerskill, SJ, Sims, RE
(2009) Development of tools for reducing the stress of using public transport. In Bust,
PD (ed) The Annual Conference of the Ergonomics Society, 2009, 'Contemporary
Ergonomics 2009', the Proceedings of the Annual Conference of the Ergonomics
Society, 2009, Royal College of Physicians, London, UK, pp.61-69, ISBN: 978-0-41580433-2. DOI: 10.1201/9780203872512.ch7.
Davis, PM, Marshall, R, Case, K, Gyi, DE, Sims, RE, Summerskill, SJ (2009) Stress
and exclusion - principles and tools for inclusive design. In International Conference on
Inclusive Design, INCLUDE 2009, Proceedings of the International Conference on
Inclusive Design, INCLUDE 2009, Royal College of Art, London, UK, pp.1-6, ISBN: 9781-905000-80-7.
Davis, PM, Marshall, R, Case, K, Gyi, DE, Sims, RE, Summerskill, SJ (2009) Stress
and Exclusion - principles and tools for inclusive design,, ISBN: 978-1-905000-80-7.
Summerskill, SJ, Marshall, R, Gyi, DE, Porter, JM, Case, K, Sims, RE, Davis, PM
(2009) Validation of the HADRIAN system with a train station design case study. In
Bust, PD (ed) Annual Conference of the Ergonomics Society, 2009, 'Contemporary
Ergonomics 2009', the Proceedings of the Annual Conference of the Ergonomics
Society, 2009, Royal College of Physicians, London, UK, pp.70-78, ISBN: 978-0-41580433-2. DOI: 10.1201/9780203872512.ch8.
Marshall, R and Case, K (2009) SAMMIE v8.4, Human Modelling Software.
Marshall, R and Case, K (2009) SAMMIE v8.4,.
Porter, S, Case, K, Summerskill, SJ, Marshall, R (2009) Four decades of SAMMIE.
Young, RIM, Gunendran, AG, Chungoora, N, Harding, JA, Case, K (2009) Enabling
interoperable manufacturing knowledge sharing in PLM. In McMahon, C, Dutta, D,
Huang, G (ed) Sixth International Product Life Cycle Management Conference, PLM09,
'Supporting the Extended Enterprise', Proceedings of the Sixth International Product
Life Cycle Management Conference, PLM09, University of Bath, Bath, UK, pp.130-138,
ISBN: 9780907776499.
Yusof, Y and Case, K (2009) A STEP compliant approach to turning operations. In Xu,
X and Nee, AYC (ed) Series in Advanced Manufacturing. Advanced Design and
Manufacturing based on STEP, Springer, pp.105-124, ISBN: 978-1-84882-738-7. Full
text: http://dx.doi.org/10.1007/978-1-84882-739-4_5. DOI: 10.1007/978-1-84882-7394_5.
Porter, JM, Marshall, R, Case, K, Gyi, DE, Sims, RE, Summerskill, SJ (2009) Inclusive
design for the mobility impaired. In Duffy, VG (ed) Handbook of Digital Human
Modelling: Research for Applied Ergonomics and Human Factors, CRC Press, pp.41.141.13, ISBN: 978-0-8058-5646-0. DOI: 10.1201/9781420063523.ch41.
Yusof, Y, Newman, ST, Nassehi, A, Case, K (2009) Interoperable CNC system for
turning operations, World Academy of Science, Engineering and Technology, 49,
pp.922-927, ISSN: 2070-3724.
Marshall, R, Porter, JM, Sims, RE, Summerskill, SJ, Gyi, DE, Case, K (2009) The
HADRIAN approach to accessible transport, Work - A Journal of Prevention,
Assessment & Rehabilitation, 33(3), pp.335-344, ISSN: 1051-9815. DOI:
10.3233/WOR-2009-0881.
Case, K, Bäckstrand, G, Högberg, D, Thorvald, P, De Vin, L (2008) An assembly line
information system study. In Cheng, K, Makatsoris, H, Harrison, D (ed) Sixth
International Conference on Manufacturing Research, ICMR08, 'Advances in
Manufacturing Technology XXII', the Proceedings of the Sixth International Conference
on Manufacturing Research, ICMR08, Brunel University, London, UK, pp.181-188,
ISBN: 978-1-902316-60-4.
Darlington, JF, Darlington, R, Harrison, R, Lee, L, Case, K, Weston, RH (2008)
Decomposition of automotive manufacturing machines through a mechanism taxonomy
within a product lifecycle management framework. In Cheng, K, Makatsoris, H,
Harrison, D (ed) Sixth International Conference on Manufacturing Research, ICMR08,
'Advances in Manufacturing Technology XXII', the Proceedings of the Sixth International
Conference on Manufacturing Research, ICMR08, Brunel University, London, UK,
pp.961-968, ISBN: 978-1-902316-60-4.
Guerrero, A, Weston, RH, Darlington, JF, Case, K, Harrison, R (2008) Development of
a new learning methodology for discrete event simulation by reutilising previous
software experience. In Cheng, K, Makatsoris, H, Harrison, D (ed) Sixth International
Conference on Manufacturing Research, ICMR08, 'Advances in Manufacturing
Technology XXII', the Proceedings of the Sixth International Conference on
Manufacturing Research, ICMR08, Brunel University, London, UK, pp.647-654, ISBN:
978-1-902316-60-4.
Case, K, Lee, MJ, Marshall, R (2008) Multiple objective optimisation for product
modularity. In Simpson, R (ed) Twenty-fifth International Manufacturing Conference,
IMC25, 'Manufacturing and Design: The Next Generation', the Proceedings of the
Twenty-fifth International Manufacturing Conference, IMC25, Dublin Institute of
Technology, Ireland, pp.361-388, ISBN: 1900454289.
Darlington, R, Wahid, BM, Weston, RH, Case, K, Harrison, R (2008) Simulation support
of lean layout considerations for new products: A case from large scale products. In
Cheng, K, Makatsoris, H, Harrison, D (ed) Sixth International Conference on
Manufacturing Research, ICMR08, 'Advances in Manufacturing Technology XXII', the
Proceedings of the Sixth International Conference on Manufacturing Research,
ICMR08, Brunel University, London, UK, pp.849-858, ISBN: 978-1-902316-60-4.
Case, K, Porter, JM, Gyi, DE, Marshall, R, Sims, RE, Summerskill, SJ, Davis, PM
(2008) Digital human modelling for virtual fitting trials. In Fortieth Annual Conference of
the Nordic Ergonomics Society, NES2008, Proceedings of the Fortieth Annual
Conference of the Nordic Ergonomics Society, NES2008, Reykjavik, Iceland, pp.1-6.
Case, K, Porter, JM, Marshall, R, Sims, RE, Summerskill, SJ, Davis, PM (2008) Digital
human modelling for virtual fitting trials,.
Summerskill, SJ, Bird, F, Case, K, Porter, JM, Marshall, R (2008) Ergonomic
assessment of the driving cabs of railway vehicles. In Fortieth Annual Conference of the
Nordic Ergonomics Society, NES2008, Proceedings of the Fortieth Annual Conference
of the Nordic Ergonomics Society, NES2008, Reykjavik, Iceland, pp.1-6.
Summerskill, SJ, Bird, F, Case, K, Porter, JM, Marshall, R (2008) Ergonomic
assessment of the driving cabs of railway vehicles,.
Thorvald, P, Bäckstrand, G, Högberg, D, de Vin, L, Case, K (2008) Information
presentation in manual assembly - a cognitive ergonomics analysis. In Fortieth Annual
Conference of the Nordic Ergonomics Society (NES2008), Proceedings of the Fortieth
Annual Conference of the Nordic Ergonomics Society, NES2008, Reykjavik, Iceland,
p.6.
Thorvald, P, Backstrand, G, Hogberg, D, de Vin, L, Case, K (2008) Information
presentation in manual assembly - a cognitive ergonomics analysis,.
Bäckstrand, G, Thorvald, P, de Vin, L, Högberg, D, Case, K (2008) The impact of
information presentation on work environment and product quality: a case study. In
Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008, Proceedings
of the Fortieth Annual Conference of the Nordic Ergonomics Society, NES2008,
Reykjavik, Iceland, pp.1-6.
Davis, PM, Case, K, Porter, JM, Marshall, R, Gyi, DE, Sims, RE, Summerskill, SJ
(2008) The psychological stress perspective - a unifying view of accessibility in public
transport and beyond. In Fortieth Annual Conference of the Nordic Ergonomics Society,
NES2008, Proceedings of the Fortieth Annual Conference of the Nordic Ergonomics
Society, NES2008, Reykjavik, Iceland, pp.1-6.
Davis, PM, Case, K, Porter, JM, Marshall, R, Gyi, DE, Sims, RE, Summerskill, SJ
(2008) The psychological stress perspective - a unifying view of accessibility in public
transport and beyond,.
Thorvald, P, Bäckstrand, G, Högberg, D, de Vin, LJ, Case, K (2008) Demands on
technology from a human automation perspective in manual assembly. In de Vin, LJ,
NG, AHC, Thorvald, P, Sullivan, WG, Ahmad, M (ed) Eighteenth International
Conference on Flexible Automation and Intelligent Manufacturing (FAIM), Proceedings
of the Eighteenth International Conference on Flexible Automation and Intelligent
Manufacturing, FAIM, University of Skovde, Sweden, pp.632-638, ISBN: 978-91-6332757-5.
Case, K and Nor, A (2008) FMEA in maintenance and diagnostics. In de Vin, LJ, Ng,
AHC, Thorvald, P, Sullivan, WG, Ahmad, M (ed) Eighteenth International Conference on
Flexible Automation and Intelligent Manufacturing, FAIM, Proceedings of the Eighteenth
International Conference on Flexible Automation and Intelligent Manufacturing, FAIM,
University of Skovde, Sweden, pp.87-94, ISBN: 978-91-633-2757-5.
Lee, MJ, Case, K, Marshall, R (2008) Multi-objective optimisation of product modularity.
In de Vin, LJ, Ng, AHC, Thorvald, P, Sullivan, WG, Ahmad, M (ed) Eighteenth
International Conference on Flexible Automation and Intelligent Manufacturing (FAIM),
Proceedings of the Eighteenth International Conference on Flexible Automation and
Intelligent Manufacturing, FAIM, University of Skovde, Sweden, pp.187-196, ISBN: 97891-633-2757-5.
Marshall, R, Summerskill, SJ, Porter, JM, Case, K, Sims, RE, Gyi, DE, Davis, PM
(2008) Multivariate design inclusion using HADRIAN. In SAE 2008 Digital Human
Modelling for Design and Engineering Symposium, Proceedings of the SAE 2008 Digital
Human Modelling for Design and Engineering Conference and Exhibition, Pittsburgh,
Pennsylvania, USA, pp.1-8, DOI: 10.4271/2008-01-1899.
Marshall, R, Summerskill, SJ, Porter, JM, Case, K, Sims, RE, Gyi, DE, Davis, PM
(2008) Multivariate design inclusion using HADRIAN,.
Graham, IJ, Campbell, RI, Case, K (2008) User-led development of an interactive
evolutionary design system. In Parmee, IC (ed) Eighth International Conference on
Adaptive Computing in Design and Manufacture, ACDM 2008, Proceedings of the
Eighth International Conference on Adaptive Computing in Design and Manufacture,
ACDM 2008, University of the West of England, Bristol, UK, pp.1-6, ISBN: 978-09552885-1-7.
Baxter, DI, Gao, JX, Case, K, Harding, JA, Young, RI, Cochrane, SD, Dani, S (2008) A
framework to integrate design knowledge reuse and requirements management in
engineering design, International Journal of Robotics and Computer-Integrated
Manufacturing, 24(4), pp.585-593, ISSN: 0736-5845. DOI: 10.1016/j.rcim.2007.07.010.
Cochrane, SD, Young, RI, Case, K, Harding, JA, Gao, J, Dani, S, Baxter, D (2008)
Knowledge reuse in manufacturability analysis, International Journal of Robotics and
Computer-Integrated Manufacturing, 24(4), pp.508-513, ISSN: 0736-5845. Full text:
http://dx.doi.org/10.1016/j.rcim.2007.07.003. DOI: 10.1016/j.rcim.2007.07.003.
Yusof, Y, Case, K, Newman, ST (2007) Application of STEP-NC for CNC machining of
asymmetrical components. In Stockton, DJ, Khalil, RA, Baines, RW (ed) Fifth
International Conference on Manufacturing Research, ICMR 2007, 'Advances in
Manufacturing Technology XXI', the Proceedings of the Fifth International Conference
on Manufacturing Research, ICMR 2007, De Montfort University, Leicester, UK, pp.8993, ISBN: 978-0955671401.
Case, K and Nor, A (2007) FMEA in automatic transmission diagnostics analysis
(FMEA). In Stockton, DJ, Khalil, RA, Baines, RW (ed) Fifth International Conference on
Manufacturing Research, 'Advances in Manufacturing Technology XXI', 'Advances in
Manufacturing Technology XXI', the Proceedings of the Fifth International Conference
on Manufacturing Research, ICMR 2007, De Montfort University, Leicester, UK, pp.3236, ISBN: 978-0955671401.
Lee, M, Case, K, Marshall, R (2007) Methodology for the multi-objective optimisation of
product modularity. In Stockton, DJ, Khalil, RA, Baines, RW (ed) Fifth International
Conference on Manufacturing Research, 'Advances in Manufacturing Technology XXI',
'Advances in Manufacturing Technology XXI', the Proceedings of the Fifth International
Conference on Manufacturing Research, ICMR 2007, De Montfort University, Leicester,
UK, pp.104-109, ISBN: 978-0955671401.
Case, K and Nor, A (2007) FMEA in design for service. In Phelan, J (ed) Twenty-fourth
International Manufacturing Conference, IMC24, 'Manufacturing: Focus on the Future',
the Proceedings of the Twenty-fourth International Manufacturing Conference, IMC24,
Waterford Institute of Technology, Ireland, pp.687-694, ISBN: 9780955646805.
Högberg, D and Case, K (2007) Predefined manikins to support consideration of
anthropometric diversity by product designers. In Duffy, VGE (ed) First International
Conference on Digital Human Modelling, Twelfth International Conference on HumanComputer Interaction, HCI 2007, 'Digital Human Modelling', Proceedings of the First
International Conference on Digital Human Modelling, Twelfth International Conference
on Human-Computer Interaction, HCI 2007, Beijing, China, pp.110-119, ISBN: 978-3540-73318-8.
Yusof, Y, Case, K, Newman, ST, Xu, XU (2007) Step compliant system for turning
operations. In Seventeenth International Conference on Flexible Automation and
Intelligent Manufacturing, Proceedings of the Seventeenth International Conference on
Flexible Automation and Intelligent Manufacturing, FAIM 2007, Philadelphia, USA,
pp.140-147, ISBN: 978-1-427620927.
Högberg, D, Bäckstrand, G, Lämkull, D, De Vin, LJ, Case, K, Örtengren, R, Hanson, L,
Berlin, C (2007) Towards dynamic ergonomics analysis of work sequences in virtual
environments. In Seventeenth International Conference on Flexible Automation and
Intelligent Manufacturing, FAIM 2007, Proceedings of the Seventeenth International
Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2007,
Philadelphia, USA, pp.581-588, ISBN: 978-1-427620927.
Baxter, D, Gao, J, Case, K, Harding, JA, Young, RI, Cochrane, SD, Dani, S (2007) An
engineering design knowledge reuse methodology using process modelling,
International Journal of Research in Engineering Design, 18(1), pp.37-48, ISSN: 09349839. Full text: http://dx.doi.org/10.1007/s00163-007-0028-8. DOI: 10.1007/s00163007-0028-8.
Marshall, R, Porter, JM, Case, K, Gyi, DE, Sims, RE, Summerskill, SJ (2007)
HADRIAN: Supporting design for all, Invited paper for the annual edition of Design for
All. Full text: http://www.designforall.in/annual.pdf .
Bäckstrand, G, Lämkull, D, Högberg, D, De Vin, LJ, Case, K (2007) Reduction of
ergonomics design flaws through virtual methods. In Thirty-ninth Annual Nordic
Ergonomics Society Conference, Proceedings of the Thirty-ninth Annual Nordic
Ergonomics Society Conference, Lysekil, Sweden, pp.1-6.
Cutting Decelle, AF, Das, BP, Young, RI, Case, K, Rahimifard, S, Anumba, CJ,
Bouchlaghem, NM (2007) A review of approaches to supply chain communications:
from manufacturing to construction, International Journal of IT in Construction, 12,
pp.73-102, ISSN: 1874-4753. Full text: http://www.itcon.org/2007/5 .
Bäckstrand, G, Högberg, D, De Vin, LJ, Case, K (2007) Ergonomics analysis in a virtual
environment, International Journal of Manufacturing Research, 2(2), pp.198-208, Full
text: http://dx.doi.org/10.1504/IJMR.2007.014645. DOI: 10.1504/IJMR.2007.014645.
Das, BP, Cutting Decelle, AF, Young, RI, Case, K, Rahimifard, S, Anumba, CJ,
Bouchlaghem, NM (2007) Towards the understanding of the requirements for a
communication language to support interoperation in cross disciplinary supply chains,
International Journal of Computer Integrated Manufacturing, 20(4), pp.396-410, ISSN:
0951-192X. DOI: 10.1080/09511920600873741.
Bäckstrand, G, De Vin, LJ, Högberg, D, Case, K (2006) Attention, interpreting, decisionmaking and acting in manual assembly. In Twenty-third International Manufacturing
Conference, IMC23, 'Innovations in Manufacturing', the Proceedings of the Twenty-third
International Manufacturing Conference, IMC23, University of Ulster, Belfast, UK,
pp.165-172.
Bäckstrand, G, De Vin, LJ, Högberg, D, Case, K (2006) Attention, Interpreting,
Decision-making and acting in manual assembly, in Innovations in Manufacturing,.
Bäckstrand, G, Högberg, D, De Vin, LJ, Case, K, Piamonte, P (2006) Ergonomics
analysis in a virtual environment. In Twenty-third International Manufacturing
Conference, IMC23, 'Innovations in Manufacturing', the Proceedings of the Twenty-third
International Manufacturing Conference, IMC23, University of Ulster, Belfast, UK,
pp.543-550.
Bäckstrand, G, Högberg, D, De Vin, LJ, Case, K, Piamonte, P (2006) Ergonomics
Analysis in a Virtual Environment,.
Porter, JM, Marshall, R, Sims, RE, Case, K, Gyi, DE (2006) HADRIAN: "I am not a
number, I am a free man!". In Karlsson, AM, Desmet, P, van Erp, J (ed) Fifth
Conference on Design and Emotion, Proceedings of the Fifth Conference on Design
and Emotion, Chalmers University Göteborg, Sweden, pp.543-550, ISBN: 91-975079-54.
Porter, JM, Marshall, R, Sims, RE, Case, K, Gyi, DE (2006) HADRIAN: "I am not a
number, I am a free man!",, ISBN: 91-975079-5-4.
Yusof, Y, Rosso Jr, RSU, Case, K, Newman, ST (2006) The design of a STEP-NC
compliant CAD/CAP/CAM system for the manufacture of rotational parts on a CNC
turning centre. In Twenty-third International Manufacturing Conference, IMC23,
'Innovations in Manufacturing', the Proceedings of the Twenty-third International
Manufacturing Conference, IMC23, University of Ulster, Belfast, UK, pp.19-28.
Yusof, Y, Rosso Jr, RSU, Case, K, Newman, ST (2006) The design of a STEP-NC
compliant CAD/CAP/CAM system for the manufacture of rotational parts on a CNC
turning centre,in 'Innovations in Manufacturing',.
Yusof, Y, Case, K, Newman, ST (2006) Machining of rotational asymmetric components
with a single turning centre. In Eighth Biennial ASME Conference on Engineering
Systems Design and Analysis, ESDA 2006, Proceedings of the Eighth Biennial ASME
Conference on Engineering Systems Design and Analysis, Torino, Italy, pp.673-681,
ISBN: 0-7918-4251-7. DOI: 10.1115/ESDA2006-95163.
Yusof, Y, Case, K, Newman, ST (2006) Machining of rotational asymmetric components
with a single turning centre,, ISBN: 0-7918-3779-3.
Porter, JM, Marshall, R, Sims, RE, Gyi, DE, Case, K (2006) HADRIAN gets streetwise.
In Pikaar, NR, Koningsveld, EAP, Settels, PJM (ed) Sixteenth Triennial World Congress
of the International Ergonomics Association, IEA 2006, 'Meeting Diversity in
Ergonomics', the Proceedings of the Sixteenth Triennial World Congress of the
International Ergonomics Association, IEA 2006, Maastricht, The Netherlands, pp.1-5,
ISBN: 978-0080450551.
Porter, JM, Marshall, R, Sims, RE, Gyi, DE, Case, K (2006) HADRIAN gets
streetwise,Elsevier Ltd.
Marshall, R and Case, K (2006) SAMMIE, SAMMIE CAD Ltd.
Marshall, R and Case, K (2006) SAMMIE v8.3,SAMMIE CAD Ltd.
Cutting Decelle, AF, Das, BP, Young, RI, Case, K, Bouchlaghem, NM, Anumba, CJ
(2006) Information exchanges in a cross-disciplinary supply chain: formal strategy and
application. In Dolgui, A, Morel, G, Pereira, C (ed) Information systems, control and
interoperability, INCOM 2006, Proceedings of INCOM 2006: Information systems,
control and interoperability, St-Etienne, France, pp.603-613, DOI: 10.1016/B978008044654-7/50228-4.
Sims, RE, Porter, JM, Summerskill, SJ, Marshall, R, Gyi, DE, Case, K (2006) Collection
of transport-related data to promote inclusive design door-to-door. In Bust, PD (ed)
Annual Conference of the Ergonomics Society, 'Contemporary Ergonomics 2006', the
Proceedings of the Annual Conference of the Ergonomics Society, Robinson College,
Cambridge, UK, pp.465-469, ISBN: 9780415398183.
Porter, JM, Case, K, Marshall, R, Gyi, DE, Sims, RE (2006) Developing the HADRIAN
inclusive design tool to provide a personal journey planner. In Bust, PD (ed) Annual
Conference of the Ergonomics Society, 'Contemporary Ergonomics 2006', the
Proceedings of the Annual Conference of the Ergonomics Society, Robinson College,
Cambridge, UK, pp.470-474, ISBN: 9780415398183.
Marshall, R, Porter, JM, Sims, RE, Gyi, DE, Case, K (2006) HADRIAN. In Bust, PD (ed)
Annual Conference of the Ergonomics Society, 'Contemporary Ergonomics 2006', the
Proceedings of the Annual Conference of the Ergonomics Society, Robinson College,
Cambridge, UK, pp.200-200, ISBN: 9780415398183.
Högberg, D and Case, K (2006) Manikin characters: User characters in human
computer modelling. In Bust, PD (ed) Annual Conference of the Ergonomics Society,
'Contemporary Ergonomics 2006', the Proceedings of the Annual Conference of the
Ergonomics Society, Robinson College, Cambridge, UK, pp.499-503, ISBN:
9780415398183.
Dani, S, Harding, JA, Case, K, Young, RI, Gao, J, Cochrane, SD, Baxter, D (2006) A
methodology for best practice knowledge management, Proceedings of the Institution of
Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220(B10), pp.17191730, ISSN: 0954-4054. Full text: http://dx.doi.org/10.1243/09544054JEM651. DOI:
10.1243/09544054JEM651.
Cutting Decelle, AF, Das, BP, Young, RI, Case, K, Rahimifard, S, Anumba, CJ,
Bouchlaghem, NM (2006) Building supply chain communication systems: a review of
methods and techniques, The Data Science Journal, 5, pp.29-51, ISSN: 1683-1470.
DOI: 10.2481/dsj.5.29.
Porter, JM, Marshall, R, Case, K, Gyi, DE, Sims, RE, Summerskill, SJ (2006) Case
study 2: HADRIAN: A human factors computer-aided inclusive design tool for transport
planning, IET Seminar Digest, 2006(11598), pp.45-59, DOI: 10.1049/ic:20060184.
Cutting-Decelle, AF, Das, BP, Young, RI, Case, K, Bouchlaghem, NM, Anumba, CJ
(2006) Information exchanges in a cross-disciplinary supply chain: Formal strategy and
application, Information Control Problems in Manufacturing 2006, IFAC Proceedings
Volumes (IFAC-PapersOnline), 12(PART 1), pp.573-578, ISSN: 1474-6670. DOI:
10.1016/B978-008044654-7/50228-4.
Yusof, Y, Newman, ST, Case, K, Rosso Jr, RSU (2005) Interoperable process planning
facility for turn/mill components. In Proceedings of the International Conference on
Computer Integrated Systems 2005 (ConCIS 2005), The International Advanced
Technology Congress 2005 (ATCi2005), Putrajaya, Proceedings of the International
Conference on Computer Integrated Systems 2005 (ConCIS2005), University Putra
Malaysia, Selangor, Malaysia, pp.33-40.
Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2005) Knowledge reuse in
manufacturability analysis. In Gao, JX, Baxter, DI, Sackett, PJ (ed) Third International
Conference on Manufacturing Research 2005, 'Advances in Manufacturing Technology
and Management', the Proceedings of the Third International Conference on
Manufacturing Research, ICMR 2005, Cranfield University, UK, pp.1-5, ISBN: 1861941-22-6.
Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2005) Knowledge sharing
between design and manufacture. In Khosla, R, Howlett, RJ, Jain, LC (ed) Ninth
International Conference on Knowledge-Based Intelligent Information & Engineering
Systems, KES 2005, Proceedings of the Ninth International Conference on Knowledge
Engineering Systems, KES 2005, 'Knowledge-based Intelligent Information and
Engineering Systems’, Melbourne, Australia, pp.221-227, ISBN: 9783540288978. DOI:
10.1007/11554028_32.
Bäckstrand, G, Högberg, D, De Vin, LJ, Case, K (2005) Parameters affecting quality in
manual assembly of engines. In Vickery, JF (ed) Twenty-second International
Manufacturing Conference, IMC22, 'Challenges Facing Manufacturing', the Proceedings
of the Twenty-second International Manufacturing Conference, IMC22, Institute of
Technology, Tallaght, Dublin, Ireland, pp.395-402, ISBN: 0-9551218-0-9.
Yusof, Y, Newman, ST, Case, K (2005) STEP compliant NC for interoperable
manufacture of turn/mill discrete components. In Vickery, JF (ed) Twenty-second
International Manufacturing Conference, IMC22, 'Challenges Facing Manufacturing', the
Proceedings of the Twenty-second International Manufacturing Conference, IMC22,
Institute of Technology, Tallaght, Dublin, Ireland, pp.529-536, ISBN: 0-9551218-0-9.
Teoh, PC and Case, K (2005) An evaluation of failure modes and effects analysis
generation method for conceptual design, International Journal of Computer Integrated
Manufacturing, 18(4), pp.279-293, ISSN: 1362-3052. DOI:
10.1080/0951192042000273122.
Case, K and Abdul Karim, MS (2005) Aesthetics considerations in evolutionary
computer aided design. In Pan, Y, Vergeest, J, Lin, Z, Wang, C, Sun, S, Hu, Z, Tang, Y,
Zhou, L (ed) Sixth International Conference on Computer Aided Industrial Design and
Conceptual Design (CAID & CD2005), 'Applications of Digital Techniques in Industrial
Design Engineering', the Proceedings of the Sixth International Conference on
Computer Aided Industrial Design and Conceptual Design, CAID and CD 2005, Delft
University of Technology, The Netherlands, pp.476-481, ISBN: 7-5062-7444-2.
Marshall, R, Porter, JM, Sims, RE, Gyi, DE, Case, K (2005) HADRIAN meets AUNTSUE. In International Conference on Inclusive Design, INCLUDE 2005, Proceedings of
the International Conference on Inclusive Design, INCLUDE 2005, Royal College of Art,
London, UK, pp.1-7, ISBN: 1-905000-10-3.
Marshall, R, Porter, JM, Sims, RE, Gyi, DE, Case, K (2005) HADRIAN meets AUNTSUE,, ISBN: 1-905000-10-3.
Bäckstrand, G, Möller, S, Högberg, D, Sundin, D, De Vin, L, Case, K (2005) Future
needs for cost calculation methods connected to ergonomics analysis and simulation. In
Thirty-seventh Annual Nordic Ergonomics Society Conference, 'Ergonomics as a tool in
future development and value creation', the Proceedings of the Thirty-seventh Nordic
Ergonomics Society Conference, NES 2005, Oslo, Norway, pp.312-316, ISBN: 82995747-1-4.
Högberg, D and Case, K (2005) The impact of manikin family configuration on
accommodation. In Nordic Ergonomics Society Thirty-seventh Annual Conference, NES
2005, 'Ergonomics as a tool in future development and value creation', the Proceedings
of the Nordic Ergonomics Society Thirty-seventh Annual Conference, NES 2005, Oslo,
Norway, pp.91-95, ISBN: 82-995747-1-4.
Baxter, DI, Gao, JX, Case, K, Harding, JA, Young, RIM, Cochrane, S, Dani, S (2005) A
framework to integrate design knowledge reuse and requirements management in
engineering design. In Gao, JX, Baxter, DI, Sackett, PJ (ed) Third International
Conference on Manufacturing Research, ICMR 2005, 'Advances in Manufacturing
Technology and Management', the Proceedings of the Third International Conference
on Manufacturing Research, ICMR 2005, Cranfield University, Cranfield, UK, pp.585593, ISBN: 1-861941-22-6.
Marshall, R, Case, K, Porter, JM, Sims, RE, Gyi, DE (2005) A computer aided
ergonomics tool to support accessible transport design. In Pan, Y, Vergeest, J, Lin, Z,
Wang, C, Sun, S, Hu, Z, Tang, Y, Zhou, L (ed) Sixth International Conference on
Computer-Aided Industrial Design and Conceptual Design, CAID and CD 2005,
'Applications of Digital Techniques in Industrial Design Engineering', the Proceedings of
the Sixth International Conference on Computer Aided Industrial Design and
Conceptual Design, CAID and CD 2005, The University of Delft, The Netherlands,
pp.482-487, ISBN: 7-5062-7444-2.
Teoh, PC and Case, K (2004) Failure modes and effects analysis through knowledge
modelling, Journal of Materials Processing Technology, 153, pp.253-260, ISSN: 09240136. DOI: 10.1016/j.jmatprotec.2004.04.298.
Case, K and Harwood, R (2004) Ergonomic design aid for hand-held products. In
Phelan, P (ed) Twenty-first International Manufacturing Conference, IMC21, 'Servicing
Manufacturing', the Proceedings of the Twenty-first International Manufacturing
Conference, IMC21, University of Limerick, Ireland, pp.667-674, ISBN: 1-8746537-7-1.
Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2004) Knowledge sharing
between design and manufacture. In Phelan, P (ed) Twenty-first International
Manufacturing Conference, IMC21, 'Servicing Manufacturing', the Proceedings of the
Twenty-first International Manufacturing Conference, IMC21, University of Limerick,
Ireland, pp.3-10, ISBN: 1-8746537-7-1.
Gyi, DE, Sims, RE, Porter, JM, Marshall, R, Case, K (2004) Representing older and
disabled people in virtual user trials: data collection methods, Applied Ergonomics,
35(5), pp.443-451, ISSN: 0003-6870. DOI: 10.1016/j.apergo.2004.04.002.
Cochrane, SD, Case, K, Young, RI, Harding, JA, Dani, S (2004) Sharing manufacturing
knowledge. In Saad, S and Perera, T (ed) Second International Manufacturing
Research, ICMR2004, 'Advances in Manufacturing Technology XVIII', the Proceedings
of the Second International Conference on Manufacturing Research, ICMR 2004,
Sheffield Hallam University, UK, pp.105-109, ISBN: 9781843870883.
Marshall, R, Case, K, Porter, JM, Sims, RE, Gyi, DE (2004) Using HADRIAN for
eliciting virtual user feedback in 'design for all', Proceedings of the Institution of
Mechanical Engineers, Part B Journal of Engineering Manufacture, 218(9), pp.12031210, ISSN: 0954-4054. DOI: 10.1243/0954405041897149.
Case, K, Graham, IJ, Wood, RL (2004) Shape modification using genetic algorithms,
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering
Manufacture, 218(B7), pp.827-832, ISSN: 0954-4054. Full text:
http://www.ingentaconnect.com/content/pep/jem/2004/00000218/00000007/art00016.
DOI: 10.1177/095440540421800716.
Case, K (2004) Knowledge engineering in product and process design. In Yan, XT,
Jiang, CY, Juster, NP (ed) Europe-Asia Symposium on Engineering Design and
Manufacture (EASED 2004), Proceedings of the Europe-Asia Symposium on
Engineering Design and Manufacture (EASED 2004),'Perspectives from Europe and
Asia on Engineering Design and Manufacture', Xi'an, P.R. China, pp.3-17, ISBN: 14020-2211-5.
Porter, JM, Case, K, Marshall, R, Gyi, DE, Sims, RE (2004) 'Beyond Jack and Jill':
designing for individuals using HADRIAN, International Journal of Industrial
Ergonomics, 33(3), pp.249-264, ISSN: 0169-8141. Full text:
http://www.elsevier.com/locate/ergon. DOI: 10.1016/j.ergon.2003.08.002.
Teoh, PC and Case, K (2004) Modelling and reasoning for failure modes and effects
analysis generation, Proceedings of the Institution of Mechanical Engineers, Part B:
Journal of Engineering Manufacture, 218(B3), pp.289-300, ISSN: 0954-4054. Full text:
http://dx.doi.org/10.1243/095440504322984849. DOI: 10.1243/095440504322984849.
Porter, JM, Marshall, R, Freer, M, Case, K (2004) SAMMIE: A computer aided
ergonomics design tool. In Delleman, NJ, Haslegrave, CM, Chaffin, DB (ed) Working
Postures and Movements, Tools for Evaluation and Engineering, CRC Press, pp.454470, ISBN: 978-0415279086.
Case, K and Abdul Karim, MS (2003) Computer aided aesthetics and functions
evaluation in evolutionary CAD. In Qin, Y and Juster, N (ed) First International
Conference on Manufacturing Research, ICMR 2003, 'Advances in Manufacturing
Technology XVII’ the Proceedings of the First International Conference on
Manufacturing Research, ICMR 2003, University of Strathclyde, Glasgow, Scotland,
pp.285-290, ISBN: 9781860584121.
Case, K, Goonetilleke, TS, Marshall, R, Porter, JM, Gyi, DE, Sims, RE (2003)
Constraint modelling in 'design for all'. In Cotterell, M (ed) Twentieth International
Manufacturing Conference, IMC20, 'Knowledge Driven Manufacturing', 'Knowledge
Driven Manufacturing'the Proceedings of the Twentieth International Manufacturing
Conference, IMC20, Cork, Ireland, pp.12-19, ISBN: 0-9545736-0-9.
Teoh, PC and Case, K (2003) Failure modes and effects analysis through knowledge
modelling. In Olabi, AG and Hashmi, SJ (ed) International Conference on Advances in
Materials and Processing Technologies, AMPT2003, Proceedings of the International
Conference on Advances in Materials and Processing Technologies, AMPT2003, Dublin
City University, Dublin, Ireland, pp.619-622, ISBN: 1-872327-397.
Case, K, Teoh, PC, Gao, J (2003) Knowledge representation and re-use in FMEA. In
Wan Abdul Rahman Wan Harun, (ed) Nineteenth International Conference on
CAD/CAM Robotics and Factories of the Future, CARs & FOF 2003, Proceedings of the
Nineteenth International Conference on CAD/CAM, Robotics and Factories of the
Future, CARS & FOF 2003, Kuala Lumpur, Malaysia, pp.1-12, ISBN: 967-924-068-1.
Marshall, R and Case, K (2003) SAMMIE, SAMMIE CAD Ltd.
Marshall, R and Case, K (2003) SAMMIE v8.2, Human Modelling Software.
Marshall, R and Case, K (2003) SAMMIE v8.2,.
Bakr, EM, Nowrooz, AH, Case, K (2003) Elasto-rigid biodynamic modelling of human
lifting activities. In Al-Azhar Engineering Seventh International Conference, Proceedings
of the Al-Azhar Engineering Seventh International Conference, Cairo, Egypt, pp.1-16.
Goonetilleke, TS, Case, K, Marshall, R, Porter, JM, Gyi, DE, Sims, RE (2003) In search
of design synthesis by linking ergonomic evaluation and constraint modelling to attain
design for all. In Inclusive Design for Society and Business, INCLUDE 2003,
Proceedings of Inclusive Design for Society and Business, INCLUDE 2003, Royal
College of Art, London, UK, pp.236-242, ISBN: 1-874175-942.
Goonetilleke, TS, Case, K, Marshall, R, Porter, JM, Gyi, DE, Sims, RE (2003) In search
of Design Synthesis by linking Ergonomic Evaluation and Constraint Modelling to attain
Design for All,, ISBN: 1-874175-942.
Bakr, EM, Case, K, Nowrooz, AH (2003) Reliable data for the finite element modelling
of human spines. In Seventh Conference on Theoretical and Applied Mechanics,
Proceedings of the Seventh Conference on Theoretical and Applied Mechanics,
Egyptian Academy of Scientific Research and Technology, Cairo, Egypt, pp.1-29.
Marshall, R and Case, K (2003) SAMMIE, SAMMIE CAD Ltd.
Marshall, R and Case, K (2003) SAMMIE v8.0, Human Modelling Software.
Marshall, R and Case, K (2003) SAMMIE v8.0,.
Högberg, D, Hanson, L, Case, K (2003) Computer manikin family usage in human
accommodation. In Rafnsdóttir, GL, Gunnarsdóttir, H, Sveinsdóttir, P (ed) Nordic
Ergonomics Society Thirty-fifth Annual Conference, NES 2003, 'Mind and Body in a
Technological World', the Proceedings of the Nordic Ergonomics Society Thirty-fifth
Annual Conference, NES 2003, Reykavik, Iceland, pp.184-188, ISBN: 9789979608615.
Case, K, Graham, IJ, Wood, RL, Abdul Karim, MS (2003) CAD genetic algorithms for
evolutionary form and function design, International Journal for Manufacturing Science
and Production, 5(1-2), pp.11-15, DOI: 10.1515/IJMSP.2003.5.1-2.11.
Porter, JM, Marshall, R, Sims, RE, Gyi, DE, Case, K (2003) HADRIAN: a human
modelling CAD tool to promote "design for all". In inclusive design for society and
business, INCLUDE 2003, Proceedings of Inclusive Design for Society and Business,
INCLUDE 2003, Royal College of Art, London, UK, pp.222-228, ISBN: 1 874175 94 2.
Porter, JM, Marshall, R, Sims, RE, Gyi, DE, Case, K (2003) HADRIAN: a human
modelling CAD tool to promote "design for all",Royal College of Art, London, ISBN: 1
874175 94 2.
Marshall, R, Porter, JM, Case, K, Sims, RE, Gyi, DE (2003) Virtual fitting trials using
Sammie and Hadrian. In Campbell, RI and Balc, NO (ed) Virtual Engineering
Applications for Rapid Product Development, an EVEN Workshop held at Solid
Modelling 2003, Birmingham, UK, pp.35-40.
Marshall, R, Case, K, Porter, JM, Gyi, DE, Sims, RE (2003) Virtual task analysis in
'design for all'. In Campbell, RI and Balc, NO (ed) European Virtual Engineering
Network (EVEN), Proceedings of the EVEN Conference on Virtual Engineering
Applications for Design and Product Development, Trinity College Dublin, Ireland,
pp.235-242, ISBN: 9780947974152.
Case, K, Graham, IJ, Wood, RL, Abdul Karim, MS (2002) CAD genetic algorithms for
evolutionary form and function design. In Cheng, K and Webb, D (ed) Eighteenth
National Conference on Manufacturing Research, ‘Advances in Manufacturing
Technology XVI, the Proceedings of the Eighteenth National Conference on
Manufacturing Research, NCMR 2002, Leeds Metropolitan University, Leeds, UK,
pp.103-107, ISBN: 1-86058-378-4.
Teoh, PC and Case, K (2002) Failure mode and effect analysis generation for
conceptual design. In Armstrong, PJ (ed) International Manufacturing Conference,
IMC19, 'Manufacturing the Future Through Innovation and Research', Proceedings of
the International Manufacturing Conference, IMC19, Queen's University, Belfast, UK,
pp.263-272, ISBN: 0-85389-8227.
Högberg, D, Case, K, De Vin, LJ (2002) Overlapping ergonomic evaluation in the
automotive design process. In Armstrong, PJ (ed) International Manufacturing
Conference, IMC19, 'Manufacturing the Future Through Innovation and Research',
Proceedings of the International Manufacturing Conference, IMC19, Queen's University,
Belfast, UK, pp.233-241, ISBN: 0-85389-8227.
Marshall, R, Case, K, Oliver, RE, Gyi, DE, Porter, JM (2002) A task based 'design for
all' support tool, Robotics and Computer-Integrated Manufacturing, 18(3-4), pp.297-303,
ISSN: 0736-5845. DOI: 10.1016/S0736-5845(02)00021-2.
Högberg, D and Case, K (2002) Supporting 'design for all' in automotive ergonomics. In
XVIth Annual International Occupational Ergonomics and Safety Conference,
Proceedings of the XVIth Annual International Occupational Ergonomics and Safety
Conference, Toronto, Canada, pp.1-5.
Högberg, D and Case, K (2002) Supporting 'Design for All' in Automotive
Ergonomics,The International Society for Occupational Ergonomics & Safety, Virginia,
USA.
Sims, RE, Marshall, R, Gyi, DE, Porter, JM, Case, K (2002) Collection of design data
from older and disabled people. In XVIth Annual International Occupational Ergonomics
and Safety Conference 2002, Proceedings of the XVIth Annual International
Occupational Ergonomics and Safety Conference, Toronto, Canada, pp.1-5.
Sims, RE, Marshall, R, Gyi, DE, Porter, JM, Case, K (2002) Collection of design data
from older and disabled people,International Society for Occupational Ergonomics and
Safety CD-ROM.
Marshall, R, Case, K, Gyi, DE, Sims, RE, Porter, JM (2002) HADRIAN: An integrated
design ergonomics analysis tool. In XVIth Annual International Occupational
Ergonomics and Safety Conference 2002, Proceedings of the XVIth Annual
International Occupational Ergonomics and Safety Conference, Toronto, Canada, pp.15, ISBN: 1860583563.
Porter, JM, Case, K, Gyi, DE, Marshall, R (2002) How can we "design for all" if we do
not know who is designed out and why?. In XVIth Annual International Occupational
Eergonomics and Safety Conference 2002, Proceedings of the XVIth Annual
International Occupational Ergonomics and Safety Conference, Toronto, Canada, pp.15.
Porter, JM, Case, K, Gyi, DE, Marshall, R (2002) How can we "design for all" if we do
not know who is designed out and why?,International Society for Occupational
Ergonomics and Safety CD-ROM.
Graham, IJ, Case, K, Wood, RL (2001) Genetic algorithms in computer-aided design,
Journal of Materials Processing Technology, 117(1-2), pp.216-221, ISSN: 0924-0136.
DOI: 10.1016/S0924-0136(01)01144-X.
Case, K, Porter, JM, Gyi, DE, Marshall, R, Oliver, RE (2001) Virtual fitting trials in
'design for all', Journal of Materials Processing Technology, 117(1-2), pp.255-261,
ISSN: 0924-0136. Full text: http://dx.doi.org/10.1016/S0924-0136(01)01143-8. DOI:
10.1016/S0924-0136(01)01143-8.
Marshall, R, Case, K, Gyi, DE, Oliver, RE, Porter, JM (2001) Supporting 'design for all'
through an integrated computer-aided ergonomics tool. In Culley, S, Duffy, A,
McMahon, C, Wallace, K (ed) Thirteenth International Conference on Engineering
Design - ICED 01, 'Design Methods for Performance and Sustainability', the
Proceedings of the Thirteenth International Conference on Engineering Design,
Glasgow, UK, pp.331-337, ISBN: 978-1860583568.
Graham, IJ, Case, K, Wood, RL (2001) Evolutionary computer aided design. In 2001
Congress on Evolutionary Computation, CEC 2001, Proceedings of the 2001 Congress
on Evolutionary Computation, CEC 2001, Seoul, South Korea,ISBN: 9780780366589.
Oliver, RE, Gyi, DE, Porter, JM, Marshall, R, Case, K (2001) A survey of the design
needs of older and disabled people. In Hanson, MA (ed) Annual Conference of the
Ergonomics Society 2001, 'Contemporary Ergonomics 2001', the Proceedings of the
Annual Conference of the Ergonomics Society, Royal Agricultural College, Cirencester,
UK, pp.365-370, ISBN: 0-415-25073-0.
Marshall, R, Case, K, Oliver, RE, Gyi, DE, Porter, JM (2001) A task based 'design for
all' support tool. In El-Baradie, M and Szecsi, TE (ed) Proceedings of the Eleventh
International Conference on Flexible Automation and Intelligent Manufacturing, FAIM
2001, Dublin City University, Dublin, Ireland, pp.147-157, ISBN: 1-872-32734-6.
Gyi, DE, Marshall, R, Oliver, RE, Porter, JM, Case, K (2001) The development of a
computer design tool for virtual user trials: Data collection methods. In International
Conference on Inclusive Design and Communications (INCLUDE 2001), Proceedings of
the International Conference on Inclusive Design and Communications (INCLUDE
2001), Royal College of Art, London, UK, p.92.
Case, K and Wan Harun, WA (2000) Feature-based representation for manufacturing
planning, International Journal of Production Research, 38(17), pp.4285-4300, ISSN:
0020-7543. DOI: 10.1080/00207540050205091.
Abdul Rani, MR, Sinclair, MA, Case, K (2000) Human mismatches and preferences for
automation, International Journal of Production Research, 38(17), pp.4033-4039, ISSN:
0020-7543. DOI: 10.1080/00207540050204894.
Gyi, DE, Porter, JM, Case, K (2000) Design practice and 'designing for all'. In XIVth
Triennial Congress of the International Ergonomics Association, ‘Ergonomics for the
New Millennium’, Proceedings of the XIVth Triennial Congress of the International
Ergonomics Association, San Diego, California, USA, pp.913-916, DOI:
10.1177/154193120004403864.
Gyi, DE, Porter, JM, Case, K (2000) Design practice and 'designing for all',Human
Factors and Ergonomics Society.
Graham, IJ, Case, K, Porter, JM, Wood, RL (2000) Genetic algorithms in computer
aided design. In Donnellan, P (ed) Seventeenth Annual Conference of the Irish
Manufacturing Committee, IMC-17, ’Building on Manufacturing Advances of the
Nineties’, Proceedings of the Seventeenth Annual Conference of the Irish
Manufacturing Committee, IMC-17, National University of Ireland, Galway, Ireland,
pp.47-53, ISBN: 0-9538974-0-0.
Case, K, Porter, JM, Gyi, DE, Marshall, R, Oliver, RE (2000) Virtual fitting trials in
'design for all'. In Donnellan, P (ed) Seventeenth Annual Conference of the Irish
Manufacturing Committee, IMC17, ’Building on Manufacturing Advances of the
Nineties’, Proceedings of the Seventeenth Annual Conference of the Irish
Manufacturing Committee, IMC-17, National University of Ireland, Galway, Ireland,
pp.35-45, ISBN: 0-9538974-0-0.
Gyi, DE, Porter, JM, Case, K (2000) Design practice and 'designing for all', Proceedings
of the XIVth Triennial Congress of the International Ergonomics Association and 44th
Annual Meeting of the Human Factors and Ergonomics Association, 'Ergonomics for the
New Millennium', 44(38), pp.913-916, DOI: 10.1177/154193120004403864.
Case, K and Hounsell, M (2000) Feature modelling: A validation methodology and its
evaluation, Journal of Materials Processing Technology, 107(1-3), pp.15-23, ISSN:
0924-0136. DOI: 10.1016/S0924-0136(00)00693-2.
Graham, IJ, Wood, RL, Case, K (1999) Evolutionary form design: The application of
genetic algorithmic techniques to computer-aided product design. In Bramley, AN,
Mileham, AR, Newnes, LB, Owen, GW (ed) Fifteenth National Conference on
Manufacturing Research, NCMR 1999, ‘Advances in Manufacturing Technology XIII‘,
the Proceedings of the Fifteenth National Conference on Manufacturing Research,
NCMR 1999, University of Bath, Bath, UK, pp.345-349, ISBN: 1-86058-227-3.
Abdul Rani, MR, Sinclair, MA, Case, K (1999) Human mismatches and preferences for
automation. In Hillery, MT and Lewis, HJ (ed) Fifteenth International Conference on
Production Research, ICPR 15, ‘Manufacturing for a Global Market’, the Proceedings of
the Fifteenth International Conference on Production Research, ICPR 15, University of
Limerick, Ireland, pp.1319-1322, ISBN: 9781874653561.
Hounsell, MS and Case, K (1999) An intent-driven paradigm for feature-based design.
In Carvalho, MF and Muller, FM (ed) Fifteenth ISPE/IEE International Conference on
CAD/CAM, Robotics and Factories of the Future, CARS & FOF '99, Proceedings of the
Fifteenth ISPE/IEE International Conference on CAD/CAM, Robotics and Factories of
the Future, CARS & FOF '99, Aquas de Lindoia, Brazil, pp.6-11.
Case, K and Wan Harun, WA (1999) Feature-based representation for manufacturing
planning. In Hillery, MT and Lewis, HJ (ed) Fifteenth International Conference on
Production Research, ICPR 15, ‘Manufacturing for a Global Market’, the Proceedings of
the Fifteenth International Conference on Production Research, ICPR 15, University of
Limerick, Ireland, pp.1733-1736, ISBN: 1-874653-56-9.
Case, K, Porter, JM, Xiao, DC, Gyi, DE (1999) Shadow-scanned human models for car
seating design. In Mondelo, P, Mattila, M, Karwowski, W (ed) International Conference
on Computer-Aided Ergonomics and Safety, CAES'99, Proceedings of the International
Conference on Computer-Aided Ergonomics and Safety, CAES'99, Barcelona, Spain,
pp.1-4, ISBN: 84 699 0852 9.
Case, K, Porter, JM, Xiao, DC, Gyi, DE (1999) Shadow-scanned Human Models for Car
Seating Design,Universitat Politecnica de Catalunya, ISBN: 84 699 0852 9.
Case, K and Hounsell, MS (1999) Evaluation of a feature modelling validation method.
In Maropoulos, PG and McGeough, JA (ed) Fifteenth International Conference on
Computer Aided Production Engineering, CAPE '99, Proceedings of the Fifteenth
International Conference on Computer Aided Production Engineering, CAPE '99,
University of Durham, UK, pp.15-22, ISBN: 978-0953555802.
Wan Harun, WA and Case, K (1999) A Feature-based representation of process
planning and assembly knowledge for concurrent engineering applications, Proceedings
of Journal of Industry Technology, 8(2), pp.19-30, ISSN: 0128-4940.
Case, K and Wan Harun, WA (1999) A single representation to support assembly and
process planning in feature-based design machined parts, Proceedings of the Institution
of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213(B2), pp.143155, ISSN: 0954-4054. DOI: 10.1243/0954405991517326.
Case, K, Sinclair, MA, Abdul Rani, MR (1999) An experimental investigation of human
mismatches in machining, Proceedings of the Institution of Mechanical Engineers, Part
B: Journal of Engineering Manufacture, 213(B2), pp.197-201, ISSN: 0954-4054. DOI:
10.1243/0954405991517326.
Freer, M, Porter, JM, Case, K (1999) Comfort equals productivity, Industrial Vehicle
Technology Europe, (6), pp.37-42, ISSN: 1461-0450.
Porter, JM, Case, K, Freer, M (1999) Computer aided design and human models. In
Karwowski, W and Marras, WE (ed) Handbook of Occupational Ergonomics, CRC
Press, pp.479-500, ISBN: 9780849326417.
Porter, JM, Freer, M, Case, K (1999) Computer aided ergonomics, Engineering
Designer, 25(2), pp.4-9.
Case, K, Xiao, DC, Acar, BS, Porter, JM (1999) Computer aided modelling of the
human spine, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of
Engineering Manufacture, 213(B1), pp.83-86, ISSN: 0954-4054. DOI:
10.1243/0954405991516679.
Hounsell, MS and Case, K (1999) Feature-based interaction: An identification and
classification methodology, Proceedings of the Institution of Mechanical Engineers Part
B: Journal of Engineering Manufacture, 213(B4), pp.369-380, ISSN: 0954-4054. DOI:
10.1243/0954405991516840.
Case, K, Xiao, DC, Acar, BS, Porter, JM (1998) Computer aided modelling of the
human spine. In Baines, RW, Taleb-Bendiab, A, Zhao, Z (ed) The Fourteenth National
Conference on Manufacturing Research, NCMR 1998, ‘Advances in Manufacturing
Technology XII‘, the Proceedings of the Fourteenth National Conference on
Manufacturing Research, NCMR 1998, University of Derby, Derby, UK, pp.369-374,
ISBN: 1 86058 172 2.
Hounsell, MS and Case, K (1998) Feature-based designer's intents. In Hepburn, C and
Harris, DMJ (ed) The Fifteenth Conference of the Irish Manufacturing Committee, IMC15, ‘Manufacturing Strategies for Europe‘, the Proceedings of the Fifteenth Conference
of the Irish Manufacturing Committee, IMC15, University of Ulster at Jordanstown, UK,
pp.193-202, ISBN: 1 85923 104 7.
Abdul Rani, MR, Case, K, Sinclair, MA (1998) Human mismatches in machining. In
Baines, RW, Taleb-Bendiab, A, Zhao, Z (ed) The Fourteenth National Conference on
Manufacturing Research, NCMR 1998, ‘Advances in Manufacturing Technology XII‘, the
Proceedings of the Fourteenth National Conference on Manufacturing Research, NCMR
1998, University of Derby, Derby, UK, pp.3-8, ISBN: 1 86058 172 2.
Hounsell, MS and Case, K (1998) Operating invalid feature-based models. In Ertas, A,
Gibson, D, Belli, F, Veniali, F, Noorani, R, Chedmall, P (ed) Third Biennial World
Conference on Integration Design and Process Technology, Proceedings of the Third
Biennial World Conference on Integrated Design and Process Technology, Berlin,
Germany, pp.151-158.
Acar, BS, Case, K, Porter, JM, Xiao, DC (1998) Spine modelling and "safe to use"
equipment design, Journal of Biomechanics, 31(Supp. 1), p.9, ISSN: 0021-9290. DOI:
10.1016/S0021-9290(98)80018-3.
Xiao, D, Case, K, Porter, JM, Acar, BS (1998) Stability of the spine modelled as an
arch. In Kornecki, S (ed) Eleventh International Biomechanics Seminar, Proceedings of
the Eleventh International Biomechanics Seminar, Wroclaw, Poland, pp.135-140, ISBN:
83-87389-19-6.
Acar, BS, Case, K, Porter, JM, Xiao, DC (1998) Mathematical modelling of human spine
and design. In Barrallo, J (ed) Second International Conference on Mathematics and
Design, Proceedings of the Second International Conference on Mathematics and
Design 98, The University of the Basque Country, San Sebastian, Spain, pp.341-348,
ISBN: 84-600-9459-6.
Xiao, DC, Acar, BS, Case, K, Porter, JM (1998) Stability of the spine modelled as an
arch, Studies and Monographs (International Biomechanics Society), Vol 55 'The
Problem of Muscular Synergism', 1, pp.135-140, ISSN: 0239-6009.
Case, K and Wan Harun, WA (1997) A representation of assembly and process
planning knowledge for feature-based design. In Harrison, DK (ed) Thirteenth National
Conference on Manufacturing Research, NCMR 1997, ‘Advances in Manufacturing
Technology XI’, the Proceedings of the Thirteenth National Conference on
Manufacturing Research, NCMR 1997, Glasgow Caledonian University, Glasgow, UK,
pp.73-78, ISBN: 1 9012 4811 9.
Xiao, DC, Case, K, Acar, BS, Porter, JM (1997) Biomechanical model of the human
spine as an arch. In Proceedings of the Twenty-first Annual Meeting of the American
Society of Biomechanics, Clemson University, South Carolina, USA, pp.20-21.
Hounsell, MS and Case, K (1997) Intent-driven reasoning priorities in a feature-based
validation system. In Monaghan, J and Lyons, CG (ed) Fourteenth Conference of the
Irish Manufacturing Committee, 'Sustainable Technologies in Manufacturing Industries',
the Proceedings of the Fourteenth Conference of the Irish Manufacturing Committee,
IMC-14, Trinity College, Dublin, Ireland, pp.115-124, ISBN: 1897606168.
Hounsell, MS and Case, K (1997) Morphological and volumetrical feature-based
designer's intents. In Harrison, DK (ed) Thirteenth National Conference on
Manufacturing Research, NCMR 1997, ‘Advances in Manufacturing Technology XI’, the
Proceedings of the Thirteenth National Conference on Manufacturing Research, NCMR
1997, Glasgow Caledonian University, Glasgow, UK, pp.64-68, ISBN: 1 9012 4811 9.
Hounsell, MS and Case, K (1997) Structured multi-level feature interaction
identification. In Kochar, AK (ed) Thirty-second International MATADOR Conference,
Proceedings of the Thirty-second International MATADOR Conference, UMIST,
Manchester, UK, pp.495-500, ISBN: 9780333716557.
Stepney, PD, Acar, BS, Case, K, Porter, JM (1997) Solid modelling of the spine, Final
Report for the Research Committee of Loughborough University.
Case, K, Porter, JM, Xiao, DC, Acar, BS (1997) Modelling the human body for
ergonomic CAD. In Tan, ST, Wong, TN, Gibson, I (ed) International Conference on
Manufacturing Automation, ICMA '97, Proceedings of the International Conference on
Manufacturing Automation, ICMA '97, University of Hong Kong, pp.697-702, ISBN:
9789628513833.
Case, K (1997) Computer human modelling. In Computer Aided Design Seminar, Hong
Kong Open Learning Institute, Hong Kong, pp.1-1.
Xiao, DC, Case, K, Acar, BS, Porter, JM (1997) Internal forces in the spine modelled as
an arch, Proceedings of the 10th International Biomechanics Seminar, 10, pp.106-113,
ISSN: 1100-2247.
Porter, JM, Case, K, Freer, M (1997) Recent applications of the SAMMIE system. In
Seppala, P, Luopajarvi, T, Nygard, CH, Mattila, M (ed) Thirteenth Triennial Congress of
the International Ergonomics Association, 'From Experience to Innovation' the
Proceedings of the Thirteenth Triennial Congress of the International Ergonomics
Association IEA 1997, Tampere, Finland, pp.93-95, ISBN: 951-802-189-9.
Case, K, Acar, BS, Porter, JM (1996) Spine modelling: A tool for safe to use equipment
design.
Stepney, PD, Acar, BS, Case, K, Porter, JM (1996) Computer aided parametric solid
modelling of the spine. In Jones, H, Raby, R, Vicars, D (ed) Eurograpics UK Chapter
14th Annual Conference, Eurographics UK Proceedings 1996, Imperial College,
London, pp.235-244, ISBN: 9780952109730.
Gindy, NNZ, Ratchev, TM, Case, K (1996) Component grouping for cell formation using
resource elements, International Journal of Production Research, 34(3), pp.727-752,
ISSN: 0020-7543. DOI: 10.1080/00207549608904931.
Xiao, DC, Case, K, Porter, JM, Gyi, DE (1996) Computer aided analysis of deformation
and pressure distribution at the driver/seat interface. In Bramley, AN, Mileham, AR,
Owen, GW (ed) Twelfth National Conference on Manufacturing Research, NCMR 1996,
‘Advances in Manufacturing Technology X’, the Proceedings of the Twelfth National
Conference on Manufacturing Research, NCMR 1996, University of Bath, Bath, UK,
pp.296-300, ISBN: 1 85790 031 6.
Case, K and Palil, MDD (1996) Geometric reasoning for ergonomic vehicle interior
design. In Bramley, AN, Mileham, AR, Owen, GW (ed) Twelfth National Conference on
Manufacturing Research, NCMR 1996, ‘Advances in Manufacturing Technology X’, the
Proceedings of the Twelfth National Conference on Manufacturing Research, NCMR
1996, University of Bath, Bath, UK, pp.291-295, ISBN: 1 85790 031 6.
Hounsell, MS and Case, K (1996) Representation validation in feature-based modelling:
A framework for design correctness analysis and assurance. In Bramley, AN, Mileham,
AR, Owen, GW (ed) Twelfth National Conference on Manufacturing Research, NCMR
1996, ‘Advances in Manufacturing Technology X’, the Proceedings of the Twelfth
National Conference on Manufacturing Research, NCMR 1996, University of Bath,
Bath, UK, pp.256-260, ISBN: 1 85790 031 6.
Porter, JM, Case, K, Freer, MT (1996) SAMMIE computer aided ergonomics, CoDesign, the interdisciplinary journal of design and contextual studies, 7-8, pp.68-75.
Case, K, Gyi, DE, Porter, JM, Xiao, DC (1995) Ergonomics and postural comfort.
Advanced technologies for automobile seat evaluation and design (SED).
Case, K, Xiao, DC, Porter, JM (1995) Car seat and occupant modelling using CAD. In
Stockton, D and Wainwright, C (ed) Eleventh National Conference on Manufacturing
Research, NCMR 1995, ‘Advances in Manufacturing Technology IX’, the Proceedings of
the Eleventh National Conference on Manufacturing Research, NCMR 1995, de
Montfort University, Leicester, UK, pp.149-153, ISBN: 0-7484-0400-7.
Porter, JM, Freer, MT, Case, K, Bonney, MC (1995) Computer aided ergonomics and
workspace design. In Wilson, JR and Corlett, EN (ed) Evaluation of Human Work,
Taylor & Francis, pp.574-620, ISBN: 07484 0084 2.
Gindy, NNZ, Ratchev, TM, Case, K (1995) Component grouping for GT applications - a
fuzzy clustering approach with validity measure, International Journal of Production
Research, 33(9), pp.2493-2509, ISSN: 0020-7543. DOI: 10.1080/00207549508904828.
Case, K and Wright, CD (1995) Emulation of modular manufacturing machines. In
Kochar, AK (ed) Thirty-first International MATADOR Conference, Proceedings of the
Thirty-first International MATADOR Conference, UMIST, Manchester, UK, pp.443-448,
ISBN: 978-0333640869.
Wan Harun, AR and Case, K (1995) Feature-based representation for assembly
modelling. In Stockton, D and Wainwright, C (ed) Eleventh National Conference on
Manufacturing Research, NCMR 1995, ‘Advances in Manufacturing Technology IX’, the
Proceedings of the Eleventh National Conference on Manufacturing Research, NCMR
1995, de Montfort University, Leicester, UK, pp.134-138, ISBN: 978-0748404001.
Case, K (1995) Shadow-scanned human representations for car seat design. In
Mumford, A (ed) Thirteenth Annual Eurographics UK Conference, Proceedings of the
Thirteenth Annual Eurographics UK Conference, Loughborough University of
Technology, Loughborough, UK, pp.249-254, ISBN: 9780952109723.
Case, K and Newman, ST (1994) Advances in Manufacturing Technology VIII, CRC,
ISBN: 9780748402540.
Porter, JM and Case, K (1994) Advanced technologies for automobile seat evaluation
and design (SED), Interim Report on Project BREZ.CT92.0246.
Gindy, NNZ and Case, K (1994) Process capability models for design and selection of
processing equipment.
Chan, AKW and Case, K (1994) Process planning by recognising and learning
machining features, International Journal of Computer Integrated Manufacturing, 7(2),
pp.77-99, ISSN: 0951-192X. DOI: 10.1080/09511929408944597.
Wan Harun, WAR and Case, K (1994) Object-oriented feature-based design. In Case,
K and Newman, ST (ed) Tenth National Conference on Manufacturing Research,
NCMR 1994, 'Advances in Manufacturing Technology VIII', the Proceedings of the
Tenth National Conference on Manufacturing Research, NCMR 1994, Loughborough
University of Technology, Loughborough, UK, pp.294-298, ISBN: 0-7484-0254-3.
Yan, XT, Case, K, Weston, RH (1994) An intelligent task programming system for
modular manufacturing machines. In Second Singapore International Conference on
Intelligent Systems, SPICIS '94, Proceedings of the Second Singapore International
Conference on Intelligent Systems, SPICIS '94, Singapore, pp.1-10.
Wright, CD and Case, K (1994) Emulation of modular manufacturing machines using
CAD modelling, Mechatronics, 4(7), pp.713-735, DOI: 10.1016/0957-4158(94)90033-7.
Yan, XT, Case, K, Weston, RH (1994) A generalised approach to the modelling of
modular machines, Proceedings of the Institution of Mechanical Engineers Part B:
Journal of Engineering Manufacture, 208(B3), pp.191-203, ISSN: 0954-4054. DOI:
10.1243/PIME_PROC_1994_208_078_02.
Case, K and Newman, ST (ed) (1994) Advances in Manufacturing Technology VIII,
Taylor and Francis, ISBN: 978-0748402540.
Case, K and Wan, AR (1994) Design by features using the ACIS modeller. In Case, K
and Newman, ST (ed) Tenth National Conference on Manufacturing Engineering,
NCMR 1994, ‘Advances in Manufacturing Technology VIII’, the Proceedings of the
Tenth National Conference on Manufacturing Engineering, NCMR 1994, Loughborough
University of Technology, Loughborough, UK, pp.294-298, ISBN: 978-0748402540.
Gao, JX, Case, K, Gindy, NNZ (1994) Geometric elements for tolerance definition in
feature-based product models. In Case, K and Newman, ST (ed) Tenth National
Conference on Manufacturing Engineering, NCMR 1994, ‘Advances in Manufacturing
Technology VIII’, the Proceedings of the Tenth National Conference on Manufacturing
Engineering, NCMR 1994, Loughborough University of Technology, Loughborough, UK,
pp.264-268, ISBN: 978-0748402540.
Case, K (1994) "Design for manufacturability: A systems approach to concurrent
engineering and ergonomics (Eds. M. Helander and N. Nagamachi).
Gao, JX and Case, K (1994) Implementation aspects of a feature-based design system
for manufacturing planning. In Olling, GJ (ed) IFIP International Conference on Feature
Modelling and Recognition in Advanced CAD/CAM Systems, Proceedings of the IFIP
International Conference, Feature Modelling and Recognition in Advanced CAD/CAM
systems, Valenciennes, France, pp.773-786.
Case, K (1994) Principles of robot modelling and simulation (S.M. Megahad). DOI:
10.1080/00207549408956965.
Gindy, NNZ, Case, K, Ratchev, TM, Gao, JX (1994) Process capability modelling for
design and selection of processing equipment. In EPSRC Design and Integrated
Production Research Conference, Proceedings of the EPSRC Design and Integrated
Production Research Conference, University of Warwick, Coventry, UK, pp.7-12.
Gindy, NNZ, Ratchev, TM, Case, K (1994) Process capability models for equipment
selection. In Case, K and Newman, ST (ed) Tenth National Conference on
Manufacturing Research, NCMR 1994, 'Advances in Manufacturing Technology VIII',
the Proceedings of the Tenth National Conference on Manufacturing Research, NCMR
1994, Loughborough University of Technology, Loughborough, UK, pp.244-248, ISBN:
978-0748402540.
Case, K (1994) Electronic Displays (S. Sherr). DOI: 10.1142/S0960313194000298.
Case, K, Gao, JX, Gindy, NNZ (1994) The implementation of a feature-based
component representation for CAD/CAM integration, Proceedings of the Institution of
Mechanical Engineers Part B: Journal of Engineering Manufacture, 208(B1), pp.71-80,
ISSN: 0954-4054. DOI: 10.1243/PIME_PROC_1994_208_061_02.
Case, K and Doyle, R (1994) The use of gestures in computer aided design. In Case, K
and Newman, ST (ed) Tenth National Conference on Manufacturing Research, NCMR
1994, 'Advances in Manufacturing Technology VIII', the Proceedings of the Tenth
National Conference on Manufacturing Research, NCMR 1994, Loughborough
University of Technology, Loughborough, UK, pp.506-510, ISBN: 978-0748402540.
Case, K (1994) Using a design by features CAD system for process capability
modelling, Computer Integrated Manufacturing Systems, 7(1), pp.39-49, ISSN: 09515240. DOI: 10.1016/0951-5240(94)90052-3.
Case, K (1993) Gestural input for conceptual design, The Application of Computers to
Manufacturing Engineering (ACME) Directorate of the Science and Engineering
Research Council (SERC).
Williams, DJ and Case, K (1993) Infrastructure support for computer integrated
manufacture, p.8, The Application of Computers to Manufacturing Engineering (ACME)
Directorate of the Science and Engineering Research Council (SERC).
Case, K (1993) Gestural input for conceptual design. In Science and Engineering
Research Council (SERC)/Applications of Computers in Manufacturing Engineering
(ACME) Grantees Conference, Proceedings of the Science and Engineering Research
Council (SERC)/Applications of Computers to Manufacturing Engineering (ACME)
Grantees Conference, University of Sheffield, Sheffield, UK.
Gao, JX, Case, K, Gindy, NNZ (1993) An experimental comparison of a feature based
design system and a conventional solid modeller. In Hassard, JS, Forrester, PL,
Hawksley, C, Tang, NKH (ed) Proceedings of the International Conference on
Managing Integrated Manufacturing: Organisation, Strategy and Technology, Keele
University, Keele, UK, pp.339-351.
Porter, JM, Case, K, Freer, MT, Bonney, MC (1993) Computer aided ergonomics
design of automobiles. In Peacock, B and Karwowski, WE (ed) Automotive Ergonomics,
Taylor and Francis, pp.43-77, ISBN: 9780748400058.
Case, K and Gao, X (1993) Feature technology - an overview, International Journal of
Computer Integrated Manufacture, 6(1&2), pp.2-12, DOI:
10.1080/09511929308944549.
Case, K, Gao, JX, Gindy, NNZ (1993) Feature validation in a feature-based design
system. In Bramley, A and Mileham, A (ed) Ninth National Conference on
Manufacturing Research, NCMR 1993, ‘Advances in Manufacturing Technology VII ‘,
the Proceedings of the Ninth National Conference on Manufacturing Research, NCMR
1993, University of Bath, Bath, UK, pp.272-276.
Gao, JX and Case, K (1993) Information mapping between a feature based design
system and an integrated process planning system. In Kochar, AK (ed) Thirtieth
International MATADOR Conference, Proceedings of the Thirtieth International
MATADOR Conference, UMIST, Manchester, UK, pp.551-558, ISBN: 9780333596487.
Case, K and Gindy, NNZ (1993) International Journal of Computer Integrated
Manufacture, Special Issue: Features.
Gao, X, Case, K, Gindy, NNZ (1992) A design by features approach to the building of
feature data models for process planning. In McGeough, JA (ed) Eighth International
Conference on Computer Aided Production Engineering, CAPE '92, Proceedings of the
Eighth International Conference on Computer Aided Production Engineering, CAPE ‘92,
University of Edinburgh, Edinburgh, UK, pp.45-51.
Chan, AKW and Case, K (1992) A knowledge-based system approach for recognition of
machining features. In Ko, NWM and Tan, STE (ed) International Conference on
Manufacturing Automation, Proceedings of the International Conference on
Manufacturing Automation, Hong Kong, pp.334-342.
Weston, RH, Moore, PR, Harrison, R, Case, K (1992) Advanced architecture for
universal machine control, The Application of Computers to Manufacturing Engineering
(ACME) Directorate of the Science and Engineering Research Council (SERC).
Case, K (1992) Feature-based CAD systems for process capability modelling. In Bruin,
D (ed) Congress Internacional de Computação Gráfica, Proceedings of CICOM GRAF
92, Sao Paulo, Brazil, pp.1-14.
Case, K (1992) Features technology: An integration methodology for CAD and CAM. In
Ko, NWM and Tan, STE (ed) International Conference on Manufacturing Engineering,
Proceedings of the International Conference on Manufacturing Automation, Hong Kong,
pp.613-624.
Case, K and Gindy, NNZ (1991) Future directions in features research.
Case, K, Bonney, MC, Porter, JM (1991) Computer graphics standards for man
modelling, Computer Aided Design, 23(4), pp.257-268, ISSN: 0010-4485. DOI:
10.1016/0010-4485(91)90066-6.
Gao, JX and Case, K (1991) Process capability modelling: A review report of feature
representation methodologies. In Case, K and Gao, JX (ed) Symposium on Featurebased Approaches to Design and Process Planning, Proceedings of the Symposium on
Feature-based Approaches to Design and Process Planning, Loughborough University
of Technology, Loughborough, UK, pp.1-63.
Weston, RH, Case, K, Moore, PR, Harrison, R (1991) Advanced architecture for
universal machine control. In Science and Engineering Research Council
(SERC)/Application of Computers to Manufacturing Engineering (ACME) Grantees
Conference, Leicester University, Leicester, UK, pp.1-5.
Case, K and Gao, JX (1991) Feature technology - an overview. In Case, K and Gao, JX
(ed) Symposium on Feature-based Approaches to Design and Process Planning,
Proceedings of the Symposium on Feature-based Approaches to Design and Process
Planning, Loughborough University of Technology, Loughborough, UK, pp.1-14.
Case, K and Gao, JX (1991) Feature technology - an overview. In Case, K and Gao, JX
(ed) Symposium on Feature-based Approaches to Design and Process Planning,
Proceedings of the Symposium on Feature-based Approaches to Design and Process
Planning, Loughborough University of Technology, Loughborough, UK, pp.1-14.
Porter, JM, Almeida, GM, Freer, MT, Case, K (1991) The design of supermarket
workstations to reduce the incidence of musculo-skeletal discomfort. In Queinnec, Y
and Daniellou, F (ed) Eleventh Triennial Congress of the International Ergonomics
Association, ‘Designing for Everyone and Everything’, the Proceedings of the Eleventh
Triennial Congress of the International Ergonomics Association, Paris, France, pp.11221124, ISBN: 9780748400454.
Doyle, R and Case, K (1991) The logical and geometric modelling of a universal
machine control reference architecture, Proceedings of the Institution of Mechanical
Engineers Part C: Journal of Mechanical Engineering Science, C415/019, pp.189-197.
Doyle, R and Case, K (1991) The logical and geometric modelling of a universal
machine control reference architecture. In European Engineering Research and
Technology Transfer Congress, Eurotech Direct '91, Proceedings of the European
Engineering Research and Technology Transfer Congress, Eurotech Direct '91,
Birmingham Conference Centre, Birmingham, UK, pp.1-22.
Case, K, Bonney, MC, Porter, JM, Freer, MT (1990) Applications of the SAMMIE CAD
system in workplace design. In Haselgrave, CM, Wilson, JR, Corlett, EN, Manenica, I
(ed) Third International Occupational Ergonomics Symposium, 'Work Design in
Practice', the Proceedings of the Third International Occupational Ergonomics
Symposium, Zadar, Yugoslavia, pp.119-127, ISBN: 9780850667707.
Case, K, Porter, JM, Bonney, MC (1990) SAMMIE: A man and workplace modelling
system. In Karwowski, W, Genaidy, AM, Asfour, SS (ed) Computer-Aided Ergonomics,
Taylor & Francis, pp.31-56, ISBN: 978-0850667530.
Yan, XT, Weston, RH, Case, K (1990) An emulation system for machine design and
control. In Eleventh International Conference on Assembly Automation, ‘Creative
Manufacturing Engineering Program’, the Proceedings of the Eleventh International
Conference on Assembly Automation, Dearborn, Michigan, USA, pp.1-18, ISBN: 9780872633926.
Wan, AR, Rajesham, S, Case, K (1990) A knowledge-based process planning system
for machine shops. In International Conference on Information Technology, ‘IT for
Competitive Advantage - Opportunities for Development’, the Proceedings of the
International Conference on Information Technology, Kuala Lumpur, Malaysia, pp.1-16.
Weston, RH, Booth, AH, Moore, PR, Harrison, PR, Case, K (1990) A machine control
shell for next generation manufacturing machines. In Davies, BJ (ed) Twenty-eighth
International MATADOR Conference, Proceedings of the Twenty-eighth International
MATADOR Conference, UMIST, Manchester, UK, pp.137-146, ISBN: 0333493478.
Porter, JM, Case, K, Bonney, MC (1990) Computer workspace modelling. In Wilson, JR
and Corlett, EN (ed) Evaluation of Human Work, CRC Press, pp.472-499, ISBN:
9780850664799.
Acar, BS and Case, K (1990) Attitudes to integrated design and process planning,
Journal of Manufacturing Systems, 19(2), pp.101-108.
Yan, XT, Weston, RH, Case, K (1990) An emulation system for machine design and
control, Society of Manufacturing Engineers, MS90-840, pp.1-18.
Doyle, R and Case, K (1990) CAE software in manufacturing engineering education,
Computers and Education, 15(1-3), pp.277-288, DOI: 10.1016/0360-1315(90)90158-4.
Case, K and Acar, BS (1990) Comparative study of geometry specification capabilities
of geometric modelling systems, Human-Computer Interaction, 1, pp.345-350.
Bonney, MC, Case, K, Porter, JM (1989) Application of SAMMIE and the development
of man modelling. In McMillan, GR, Beevis, D, Salas, E, Strub, MH, Sutton, R, Van
Breda, L (ed) Applications of Human Performance Models to System Design, Plenum
Publishing Corp, pp.341-351, ISBN: 9780306432422.
Case, K and Acar, BS (1989) Learning studies in the use of computer aided design
systems for discrete parts manufacture, Behaviour and Information Technology, 8(5),
pp.353-368, ISSN: 0144-929X. DOI: 10.1080/01449298908914566.
Case, K and Acar, BS (1989) The manufacturing features approach to design and its
impact on the learning and use of computer aided design systems. In Megaw, ED (ed)
Annual Conference of the Ergonomics Society, ‘Contemporary Ergonomics 1989’,
Proceedings of the Annual Conference of the Ergonomics Society, University of
Reading, Reading, UK, pp.132-137, ISBN: 978-0850664843.
Case, K (1989) Data transfer by CGM files. In Computer Graphics '89, 'Computer
Graphics 89', the Proceedings of Computer Graphics 89, Alexandra Palace, London,
UK, pp.1-1, ISBN: 9780863531903.
Case, K (1989) Computer graphics metafiles. In Seventh Eurographics UK Conference,
University of Manchester, Manchester, UK, pp.1-1.
Acar, BS and Case, K (1989) Attitudes to integrated design and process planning. In
Twenty-first International Seminar on Manufacturing Systems, Proceedings of the
Twenty-first International Seminar on Manufacturing Systems, Stockholm, Sweden,
pp.115-128.
Bonney, MC, Taylor, N, Case, K (1989) Using CAD and expert systems for human
workplace design. In Woodwark, J (ed) Geometric Reasoning, Oxford University Press,
pp.269-282, ISBN: 978-0198537380.
Doyle, R and Case, K (1989) CAE Software in manufacturing engineering education. In
Kibby, MR (ed) Computer Aided Learning Symposium, CAL 89, Computer Assisted
Learning: Selected Contributions from the CAL'89 Symposium, University of Surrey,
Guildford, UK, pp.277-288, ISBN: 9780080402499.
Case, K (1988) Software for discrete manufacturing (J P Crestin and J F Walters). DOI:
10.1080/00207548808947967.
Porter, JM, Case, K, Bonney, MC, Freer, MT (1988) Vehicle design and evaluation
using the SAMMIE system. In Adams, AS, Hall, RR, McPhee, BJ, Oxenburgh, MS (ed)
Tenth Trienniel Congress of the International Ergonomics Association, 'Designing a
Better World', the Proceedings of the Tenth Triennial Congress of the International
Ergonomics Association, Sydney, Australia, pp.81-83, ISBN: 9780731641291.
Bonney, MC, Case, K, Porter, JM (1988) Application of SAMMIE and the development
of man modelling. In NATO Workshop on Application of Human Performance Models to
System Design, Proceedings of the NATO Workshop on Application of Human
Performance Models to System Design, Orlando, Florida, USA, pp.1-11.
Case, K (1988) Solid modelling for design and manufacture. In Conference on
CAD/CAM Applications in Manufacturing Technology, Kuala Lumpur, Malaysia, pp.1-1.
Case, K (1988) Computer aided design in the context of manufacturing engineering and
computer integrated manufacture. In Conference on CAD/CAM Applications in
Manufacturing Technology, Kuala Lumpur, Malaysia, pp.1-1.
Chan, SF, Weston, RH, Case, K (1988) Robot simulation and off-line programming,
Computer-aided Engineering Journal, 5(4), pp.157-162, ISSN: 0263-9327.
Case, K, Acar, BS, Hart, NM (1987) Computer aided production engineering linking
CAD, process planning and tool design. In Science and Engineering Research Council
(SERC)/Applications of Computing in Manufacturing Engineering (ACME) Grantees
Conference, Cambridge, UK, pp.1-8.
Case, K (1987) CAD - technical trends.
Case, K, Porter, JM, Bonney, MC (1986) SAMMIE: A computer aided design tool for
ergonomists. In Human Factors Society Thirtieth Annual Meeting, 'A Cradle for Human
Factors', the Proceedings of the Human Factors Society Thirtieth Annual Meeting,
Dayton, Ohio, USA, pp.694-698, ISBN: 978-9996256127.
Case, K (1986) Human factors in computer-aided design (A Majchrzak, T C Chang, W
Barfield, E Eberts and G Salvendy). DOI: 10.1080/00207548808947945.
Case, K (1986) Computer aided electronic engineering (W P O'Reilly).
Acar, BS and Case, K (1986) A CAD system to aid process planning. In Second
Machine Design and Manufacture Congress, Ankara, Turkey, pp.1-1.
Acar, BS, Case, K, Bennaton, JA, Hart, NM (1986) Evaluation of a new approach to
design and process planning. In Fourth Conference on UK Research in Automated
Manufacture, Proceedings of the Fourth Conference on UK Research in Automated
Manufacture, London, UK, pp.1-5.
Porter, JM, Case, K, Bonney, MC (1986) SAMMIE: An ergonomics CAD system for
vehicle design and evaluation. In Institute of British Carriage and Automobile
Manufacturers Conference (BODITEK'86), Keele University, UK, pp.1-13.
Hart, NM, Case, K, Bennaton, JA, Acar, BS (1986) A CAD engineering language to aid
manufacture. In McGeough, JA (ed) First International Conference on Computer-Aided
Production Engineering, Proceedings of the First International Conference on
Computer-Aided Production Engineering, Edinburgh, UK, pp.335-339, ISBN:
9780852986004.
Hart, N, Case, K, Bennaton, J, Acar, S (1986) CAD engineering language to aid
manufacture, Institution of Mechanical Engineers Conference Publications, 1, pp.335340.
Acar, BS, Case, K, Bennaton, J, Hart, N (1986) Evaluation of a new approach to design
and process planning, Institution of Mechanical Engineers Conference Publications,
C371/86, pp.131-135, ISSN: 0144-0799.
Case, K (1985) Contemporary Ergonomics 1984 (ed. E D Megaw) and Contemporary
Ergonomics 1985 (ed. D J Oborne). DOI: 10.1080/00207548508928076.
Case, K, Acar, BS, Bennaton, JA, Hart, NM (1985) A system to aid design by planning
manufacturing operations. In McGoldrick, PF (ed) First National Conference on
Production Research, 'Advanced Manufacturing Technology', the Proceedings of the
First National Conference on Production Research, University of Nottingham,
Nottingham, UK, pp.1-13, ISBN: 9781850910398.
Case, K (1984) Effective CADCAM. Engineering and Manufacturing Industries Division
of the Institute of Mechanical Engineers. DOI: 10.1080/00207548408942490.
Case, K (1984) A new technique of job analysis (W Rohmert and K Landau). DOI:
10.1080/00207548408942476.
Case, K (1984) Floodlighting design by CAD. In Third European Conference on
CAD/CAM and Computer Graphics, MICAD'84, Proceedings of the Third European
Conference on CAD/CAM and Computer Graphics, MICAD'84, Paris, France, pp.449459, ISBN: 9780850388527.
Case, K, Blunsdon, CA, Austin, K (1983) Computer aids for floodlighting design,
Applied Ergonomics, 14(1), pp.29-37, ISSN: 0003-6870. DOI: 10.1016/00036870(83)90216-8.
Case, K, Blunsdon, CA, Austin, K (1982) Computer aids for floodlighting design,
Ergonomics, 25(4), pp.337-337, ISSN: 0014-0139.
Bonney, MC, Case, K, Porter, JM (1982) User needs in computerised man models. In
Easterby, RS, Kroemer, KHE, Chaffin, DB (ed) Anthropometry and Biomechanics,
Theory and Application. NATO Conference Series III Human Sciences, Plenum Press,
pp.97-101, ISBN: 9780306407451.
Case, K, Blunsdon, CA, Austin, K (1982) Computer aids for floodlighting design. In
Annual Conference of the Ergonomics Society, Brighton, UK.
Kingsley, EC, Schofield, NA, Case, K (1981) SAMMIE: a computer aid for man machine
modelling, ACM SIGGRAPH Computer Graphics, 15(3), pp.163-169, ISSN: 0097-8930.
DOI: 10.1145/965161.806802.
Kingsley, EC, Schofield, NA, Case, K (1981) SAMMIE: A computer aid for man machine
modelling. In Eighth Annual Conference on Computer Graphics and Interactive
Techniques, SIGGRAPH 81, Proceedings of the Eighth Annual Conference on
Computer Graphics and Interactive Techniques, SIGGRAPH 81, Dallas, Texas, USA,
pp.163-169, ISBN: 0897910451. DOI: 10.1145/965161.806802.
Case, K and Porter, JM (1980) SAMMIE.
Bonney, MC, Porter, JM, Case, K (1980) SAMMIE - Computer aided ergonomic
workplace design system.
Case, K and Porter, JM (1980) SAMMIE: A computer aided ergonomics design system,
Engineering, 220, pp.21-25.
Case, K, Porter, JM, Bonney, MC, Levis, JA (1980) Design of mirror systems for
commercial vehicles, Applied Ergonomics, 11(4), pp.199-206, DOI: 10.1016/00036870(80)90229-X.
Case, K and Porter, JM (1980) SAMMIE - An ergonomics evaluation system. In Visual
Modelling Conference, Sheffield, UK, pp.1-1.
Porter, JM, Case, K, Bonney, MC (1980) A computer generated three dimensional
visibility chart. In Oborne, DJ and Levis, JA (ed) Ergonomics Society International
Conference on Ergonomics and Transport, 'Human Factors in Transport Research', the
Proceedings of the Ergonomics Society Conference on Ergonomics and Transport,
Swansea, UK, pp.365-373, ISBN: 9780125238014.
Levis, JA, Smith, JP, Porter, JM, Case, K (1980) The impact of computer aided design
on pre-concept package design and evaluation. In Oborne, DJ and Levis, JA (ed) The
Ergonomics Society International Conference on Ergonomics and Transport, 'Human
Factors in Transport Research', the Proceedings of the Ergonomics Society Conference
on Ergonomics and Transport, Swansea, UK, pp.356-364, ISBN: 9780125238014.
Bonney, MC, Case, K, Porter, JM (1980) User needs in computerised man models. In
NATO Symposium on Anthropometry and Biomechanics: Theory and Application,
Cambridge, UK, pp.1-5.
Bonney, MC, Case, K, Dooner, M, Porter, JM (1980) Using the SAMMIE computer
aided design system for workplace design. In Institute of Management Services
Summer School, St John's College, Cambridge, UK, pp.1-9.
Case, K (1980) SAMMIE. In Annual Conference of the Ergonomics Society,
Nottingham, UK, pp.1-1.
Case, K and Porter, JM (1980) SAMMIE can cut out the prototypes in ergonomic
design.
Case, K and Porter, JM (1980) SAMMIE. A computer aided ergonomics design system.
Heginbotham, WB, Dooner, M, Case, K (1979) Robot application simulation, Industrial
Robot, 6(2), pp.76-80, DOI: 10.1108/eb004753.
Heginbotham, WB, Dooner, M, Case, K (1979) Robot Application Simulation.
Heginbotham, WB, Dooner, M, Case, K (1979) Assessing robot performance with
interactive computer graphics.
Bonney, MC, Case, K, Porter, JM, Levis, JA (1979) Design of mirror systems for
commercial vehicles. In Annual Conference of the Ergonomics Society, Oxford, UK,
pp.1-16.
Heginbotham, WB, Dooner, M, Case, K (1979) Rapid assessment of industrial robot
performance by interactive computer graphics. In Ninth International Symposium on
Industrial Robots, Washington, USA, pp.1-12.
Bonney, MC, Blunsdon, CA, Case, K, Porter, JM (1979) Man-machine interaction in
work systems. In Vth International Conference on Production Research, Amsterdam,
The Netherlands, pp.1-11.
Bonney, MC, Blunsdon, CA, Case, K, Porter, JM (1979) Man-machine interaction in
work systems, International Journal of Production Research, 17(6), pp.619-629, DOI:
10.1080/00207547908919641.
Bonney, MC and Case, K (1978) SAMMIE computer aided work place and work task
design system.
Bonney, MC and Case, K (1976) The development of SAMMIE for computer aided work
place and work task design. In Human Factors and Ergonomics Society Annual
Meeting, Proceedings of the Human Factors and Ergonomics Society Annual Meeting,
Maryland, USA, pp.340-348, DOI: 10.1177/154193127602001601.
Case, K (1975) An anthropometric and biomechanical computer model of man. Full
text: http://etheses.nottingham.ac.uk/1196/1/450883.pdf .
Bonney, MC, Case, K, Hughes, BJ, Kennedy, DN, Williams, RW (1974) Using SAMMIE
for computer aided work place and work task design, Society of Automotive Engineers,
Publication No. 740270, pp.1-13, DOI: 10.4271/740270.
Bonney, MC, Case, K, Hughes, BJ, Kennedy, DN, Williams, RW (1974) Using SAMMIE
for computer aided work place and work task design. In Society of Automotive
Engineers, (ed) Automotive Engineering Congress and Exposition of the Society of
Automotive Engineers, Detroit, USA, pp.1-13.
Bonney, MC, Case, K, Hughes, BJ, Schofield, NA, Williams, RW (1972) Computer
aided workplace design using SAMMIE. In Annual Conference of the Ergonomics
Research Society, Cardiff, UK, pp.1-13.
Sanchez, A, Goh, YM, Case, K (2014) Human interaction with variability in manual
manufacturing processes. A case study.. In Manufacturing the Future 2014, Glasgow.
Sanchez, A, Mat, S, Goh, Y, Case, K (2013) HUMAN VARIABILITY, TASK
COMPLEXITY AND MOTIVATION CONTRIBUTION IN MANUFACTURING. In
International Conference on Manufacturing Rersearch, Cranfield University.