MATERIAL SAFETY DATA SHEET

advertisement
MSDS 264/ Dept.126
Luster Products, Inc.
MATERIAL SAFETY DATA SHEET
SECTION I – Product and Company Identification
PRODUCT NAME: YOU PRO™ VITA-POLISH
Product Code #: 264
Manufacturer: Luster Products, Inc.
1104 W. 43rd Street
Chicago, IL 60609
Emergency Phone: 1(800) 621-4255
Business Phone: 1(800) 621-4255
Date Prepared: 3/29/07
Date Revised: 4/12/07
SECTION II – Composition/Ingredient Information
Chemical Name
CAS#
WT%
Limits in Air
Exposure
LD50(oral-rat)
ACGIH (TWA)
OSHA (PEL)
OSHA Stel
Synthetic Isoparaffinic
Hydrocarbon1
64742-48-9
9 - 13
Not Avail
Not Avail
Not Avail
Decamethylcyclopentasiloxane2
541-02-6
6-9
10ppm TWA
Not Established
>20g/kg
Dodecamethyl
cyclohexasiloxane2
540-97-6
3-5
10ppm TWA
Not Established
>20g/kg
<1
Not Established Not Established
Heptane, 2,2,4,6,6Pentamethylheptane3 13475-82-6
>5,000 mg/kg
The remaining ingredients are not hazardous at the concentrations and combinations used.
1
ExxonMobile Chemical Company, MSDS 02/27/2003
Dow Corning Corporation, MSDS 08/30/2005
3
Presperse, Inc., MSDS 03/28/2002
SECTION III – Hazards Identification
2
Eye Contact: May cause moderate eye irritation. Do not allow product to get into eyes.
Skin Contact: No adverse effects expected.
Ingestion: The product contains a synthetic hydrocarbon, which if aspirated into the respiratory
system during ingestion or vomiting may cause mild to severe pulmonary injury, possibly
leading to death.
Printed: 3/7/2016 8:31 PM
YOU PRO™ VITA-POLISH
1 of 5
MSDS 264/ Dept.126
Luster Products, Inc.
SECTION IV – First Aid Measures
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. Seek medical
attention if irritation persists.
Skin Contact: Product is intended for conditioning hair. If symptoms develop, seek medical
advice. If necessary, use soap and water to remove from skin.
Ingestion: If ingestion occurs, seek immediate medical attention. Do not induce vomiting due to
aspiration hazard. If vomiting occurs, lower head below knees to avoid aspiration.
SECTION V – Fire Fighting Measures
Flash Point:
(Synthetic Isoparaffinic Hydrocarbon): 120°F (48.9°C)
(Decamethylcyclopentasiloxane/
Dodecamethyl cyclohexasiloxane): 171°F (77.2°C)
(Decamethylcyclopentasiloxane/
Dodecamethyl cyclohexasiloxane): 170.6°F (77°C)
(Heptane, 2,2,4,6,6-pentamethyl): 109.4°F (43°C)
Method Used:
TCC ASTM D56
Pensky-Martens Closed Cup
Tag Closed Cup
CC
Auto-Ignition Temperature: 689°F (365°C) (Synthetic Isoparaffinic Hydrocarbon)
Not determined for Decamethylcyclopentasiloxane
Not determined for Dodecamethyl cyclohexasiloxane
806°F (430°C) (Heptane, 2,2,4,6,6-pentamethyl)
Flammable Limits in Air, % Volume
LEL: 0.7 UEL: 5.4 (Synthetic Isoparaffinic Hydrocarbon)
Not determined for Decamethylcyclopentasiloxane
Not determined for Dodecamethyl cyclohexasiloxane
LEL: 0.5 UEL: 4.0 (Heptane, 2,2,4,6,6-pentamethyl)
Extinguishing Media: CO2; Dry Chemicals; Foam; Do not use a direct stream of water.
Special Fire Fighting Procedures: WARNING, COMBUSTIBLE. Water may be ineffective
due to high oil content but can be used to cool containers exposed to heat or flame. Clear the fire
area of unprotected personnel. Do not enter confined fire space without full bunker gear (helmet
with face shield, bunker coats, gloves and rubber boots), including a positive pressure NIOSH
approved self-contained breathing apparatus.
Fire and Explosion Hazards: COMBUSTIBLE. Containers exposed to intense heat from fires
should be cooled with water to prevent vapor pressure buildup. Liquid is volatile and gives off
invisible vapors. Caution should be exercised when using water as frothing may occur,
especially if sprayed into containers of hot, burning liquid. Dense smoke may be generated
while burning.
Printed: 3/7/2016 8:31 PM
YOU PRO™ VITA-POLISH
2 of 5
MSDS 264/ Dept.126
Luster Products, Inc.
SECTION VI – Accidental Release Measures
Small Spill Procedure: FLAMMABLE LIQUID. ELIMINATE ALL IGNITION SOURCES.
May be cleaned with rags, paper towel, inert absorbent or a mop. Rinse cleaning equipment with
water before disposal or storage. Contaminated absorbent should be transferred to containers
with pressure-relief devices and disposed of properly. Rinse areas with detergent and water to
remove residual product. Beware of slippery floors.
Large Spill Procedure: FLAMMABLE LIQUID. ELIMINATE ALL IGNITION SOURCES.
Prevent additional discharge of material, if possible to do so without hazard. Prevent liquid
and/or vapors from entering sewers, watercourses or low areas. Handling equipment must be
grounded to prevent sparking. Remove with vacuum trucks or pump to storage/salvage vessels.
Soak up residue with an absorbent material and place in non-leaking containers for appropriate
disposal. Flush area with water and detergent to remove trace residue.
SECTION VII – Handling and Storage
Handling: Protect product from extreme heat and freezing. Keep out of the reach of children.
Use only as directed.
Storage: Store in ambient, cool dry place. Keep at ambient temperature.
SECTION VIII – Exposure Controls/Personal Protection
Specified Respiratory Protection: None required for normal usage.
Ventilation Required: None required for normal usage.
Protective Gloves:
None required for normal usage.
Eye Protection:
None required for normal usage.
Other Protective Equipment: None.
SECTION IX – Physical/Chemical Properties
Physical Form: Viscous Liquid
Color/Appearance: Water White gel
Boiling Point: Not determined
Specific Gravity: 0.875 ± 0.05g/cc
Vapor Density (air=1): >1
Evaporation Rate (water=1): <1
pH: N/A
Odor: Characteristic Fruity Fragrance
Melting Point: NDA
Viscosity: @ 25C < 20,000cps
Water Solubility: Not soluble
% Volatility:
SECTION X – Stability and Reactivity
Stability: Stable
Printed: 3/7/2016 8:31 PM
YOU PRO™ VITA-POLISH
3 of 5
MSDS 264/ Dept.126
Luster Products, Inc.
Hazardous Polymerization: No
Incompatibility (materials to avoid): Avoid strong oxidizing agents
Hazardous Decomposition Products: Carbon monoxide, carbon oxides and traces of
incompletely burned carbon compounds, silicon dioxide and formaldehyde.
Conditions to Avoid: Protect product from ignition sources, extreme heat and freezing. Do not
expose product to children who are likely to swallow this or any other product.
SECTION XI –Toxicological Information
Medical Conditions Aggravated by Exposure: None Known
SECTION XII – Ecological Information
No specific ecological data is available for this product. Large quantities should not be
discharged into waterways to prevent pollution of the waterways.
SECTION XIII – Disposal Considerations
Dispose of liquid waste According to Federal, State and local Regulations. Empty containers can
be disposed of in the trash or recycled if facilities exist. Contact a licensed waste management
company for disposal of a large number of filled containers. The material, if spilled or discarded
may be regulated water. Refer to Federal, state and local regulations.
If this product becomes a waste material, it would be ignitable hazardous waste. Refer to latest
Federal EPA or State regulations regarding proper disposal.
SECTION XIV – Transport Information
The following information is presented only as a guideline as shipping regulations frequently
change. The shipper is responsible for checking the current regulations.
DEPARTMENT OF TRANSPORTATION (DOT):
Hazardous Materials Descriptions and Proper Shipping Names: Consumer Commodity
Hazard class or division: ORM-D
Identification numbers: UN1993
Label Codes: 3
INTERNATIONAL CARRIAGE OF DANGEROUS GOODS BY ROAD (ADR)
Name/Description: FLAMMABLE LIQUID, N.O.S.
UN No.: UN1993
Class: 3
Classification code: F1
Printed: 3/7/2016 8:31 PM
YOU PRO™ VITA-POLISH
4 of 5
MSDS 264/ Dept.126
Luster Products, Inc.
Packing Group: III
Label Codes: 3
Limited Quantities see LQ7
Hazard Identification Number: 33
INTERNATIONAL SHIPPING BY AIR (IATA)
Proper Shipping Name/Description: FLAMMABLE LIQUID, N.O.S.
Class or Division: 3
UN/ID Number: UN1993
Shipper must be trained and certified. Refer to IATA Regulations. Must be shipped through a
dangerous goods consultant.
INTERNATIONAL MARITIME SHIPPING (IMDG)
Proper Shipping Name: FLAMMABLE LIQUID, N.O.S
UN Number: UN1993
Class or Division: 3
Shipper must be trained and certified. Refer to IMDG Regulations.
For shipping to any destination, appropriate packaging materials and labels must be used. If
classified as hazardous, see UPS Guide for Shipping Ground and Air Hazardous Materials,
IATA Dangerous Goods Regulations (38th Edition), US Dept. of Transportation Regulations in
49 CFR 172. et seq., IMO and ICAO guidelines.
SECTION XV – Regulatory Information
This product has been classified according to the hazard criteria of the CFR and the MSDS
contains all the information required by CFR.
SECTION XVI – Other Information
The above information is based on the data available to us and is believed to be correct as of the
date issued. However, NO WARRANTY expressly implied or otherwise, is made to the
accuracy or suitability of this information to the purchaser’s intended purpose. Since the
information contained herein may be applied under conditions beyond our control and with
which we may be unfamiliar, we do not assume any responsibility for the results of its use. Use
this product only as directed. For further information concerning product safety and use, call the
number listed on the front of the MSDS.
Printed: 3/7/2016 8:31 PM
YOU PRO™ VITA-POLISH
5 of 5
Download