MATERIAL SAFETY DATA SHEET
Product Name: INSTANT SNOW
Revision Date: 01/14/10
Black Light World
PO Box 26
Cub Run, Ky 42729
TEL. NO.:(270) 528-6555
FAX. NO.:(270) 721-0073
SPECIAL NOTICE
All information, recommendations and suggestions appearing herein concerning
this product are based upon data obtained from the manufacturer and/or
recognized technical sources. However, Black Light World makes no warranty,
representation or guarantee as to the accuracy, sufficiency or completeness of
the material set forth herein. It is the user's responsibility to determine
the safety, toxicity and suitability of his own use, handling and disposal of
the product, Additional product literature may be available upon request.
Since actual use by others is beyond our control, no warranty express or
implied, is made by Black Light World as to the effects of such use, the
results to be obtained or the safety and toxicity of the product, nor does
Black Light World assume any liability arising out of use by other of the
product referred to herein. The data in the MSDS relates only to specific
material designated herein and does not relate to use in combination with any
other material or in any process.
SECTION I -- IDENTITY INFORMATION__________________________
Product Name: INSTANT SNOW
CAS Number
Proprietary/Contains Acrylic acid, Polymers, & Sodium salt.
Company Identification: Black Light World EMERGENCY NUMBER 270 524-5746
PO Box 26
Cub Run, Ky 42729
Product Class
Trade Name
Product Code
Polymers and sodium salt
INSTANT SNOW
___________________________________________________________
SECTION II – INGREDIENT AND HAZARD INFORMATION
Ingredient Name
CAS Number
INSTANT SNOW
PROPRIETARY
(No hazardous ingredients known at this time
SECTION III – HAZARDS IDENTIFICATION
White odorless powder
In presence of an ignition source, dust may form explosive mixture with air.
Thermal decomposition results in toxic by-products.
Health 0 Flammability 0 Reactivity 0 Storage 0 0 is low 3 is high
SECTION IV – FIRST AID MEASURES
EYE CONTACT
Immediately flush with water for at least 15 minutes while holding eyelids
open. Call a physician.
SKIN CONTACT
Practice good industrial hygiene. Wash with soap and water.
INHALATION
Remove to fresh air. Treat symptoms with artificial respiration immediately.
Call physician.
INGESTION
Give large quantities of water. Call a physician.
SECTION V – FIRE FIGHTING MEASURES
Combustible solid
When heated to decomposition, emits toxic byproducts.
Fire fighting instructions: Use triclass, dry chemical fire extinguisher fire
fighters should wear PPE and SCBA with full facepiece operated in positive
pressure mode.
SECTION VI – ACCIDENTAL RELEASE MEASURES
Restrict unprotected personnel from area. Remove all sources of water. Sweep
up, place in a sealed bag or container and dispose. Ventilate area and wash
spill site after material pick up is complete. See section 8 & 13 for further
information.
SECTION VII – HANDLING AND STORAGE
Store with organic miscellaneous.
Store in a dry area. Air and moisture sensitive. Use fume hood if heating.
SECTION VIII – EXPOSURE CONTROLS/PERSONAL PROTECTION
Avoid contact with eyes, skin, and clothing. Wear chemical splash goggles,
chemical resistant gloves & chemical resistant apron.
SECTION IX – PHYSICAL AND CHEMICAL PROPERTIES
Form:
Appearance/Color:
Odor:
Solubility (In Water):
Powder odorless
White
None
Insoluble, swells
Decomposition: 330 C
Auto Ignition: 400 C
SECTION X – STABILITY AND REACTIVITY
CONDITIONS TO AVOID
Avid moisture and sources of ignition.
SECTION XI – TOXICOLOGICAL INFORMATIOM
Acute effects: Eye irritant
Chronic effects: N/A
Target organs: N/A
SECTION XII – ECOLOGICAL INFORMATIOM
Non toxic biodegradable.
SECTION XIII – DISPOSAL
Dispose in accordance with local, state, and federal regulations.Destroy the
product by incineration.
SECTION XIV – TRANSPORT INFORMATION
UN Number
N/A
Hazard Class N/A
Shipping Name Not regulated
SECTION XV – REGULATORY INFORMATION
Not listed
FDA 21 CFR
Black Light World products are not listed by the FDA for use under 21 CFR
since potential applications are so numerous that specific application must be
submitted to the FDA for inclusion in the 21 CFR FDA listings.
SECTION XVI – OTHER INFORMATION
DISCLAIMER
The information contained herein is believed to be accurate, but is not
warranted. Nothing contained herein constitutes a specification, nor is it
intended to warrant suitability for the intended use.