APPLICATION FOR GRANT OF AFFILIATION FOR TRADES UNDER NCVT, DGE&T,
M/o. LABOUR, GOVERNMENT OF INDIA
Annexure – I
Particulars to be furnished by the Management of the Private Institute / Centre
seeking permission to conduct Training Courses on the Pattern of Craftsmen
Training Scheme Leading to Affiliation to NCVT
I.
Particulars of the Proposed Institute / Centre:
1.
2.
3.
4.
Name / Proposed name of the Institute / Centre:
Full address of the Institute / Centre:
Proposed date of establishment:
Particulars of the trades / Units proposed to be started on the pattern of Craftsmen
Training Scheme:
Sl.No.
5.
Designation
Proposed date of start
No. proposed to
be appointed
Proposed date of
appointment
Accommodation proposed to be provided:
Sl.No. Nature of room /
Workshop / Laboratory
7.
No. of units
Staff proposed to be appointed:
Sl.No.
6.
Trades
Area proposed to
be provided
Any other particulars of the proposed Institute / Centre:
Owned or Hired
GUIDELINES / INSTRUCTIONS TO BE FOLLOWED STRICTLY BEFORE SUBMITTING THE
APPLICATION FOR AFFILIATION WITH NCVT ON ANNEXURE– I
1.
Applications duly filled in the given format along with all the enclosures should be submitted in a file
cover.
2.
Proposed name of the center should end as INDUSTRIAL TRAINING CENTRE (ITC) and should
not have the word National or Indian. Complete address with telephone Nos., if any of office as
well as residence of Chairman / Director etc. of both proposed center and society / office should be
clearly shown.
3.
The Registered Trusts / Societies managing Educational Institutes / Centres having
premises / land as per MPD-2021 are only eligible to apply.
4.
Blue Print of the building drawn by an architect and duly approved by the Competent Authority Viz.
MCD / NDMC / DDA (All dimensions shown in Meters) along with site plan showing location, etc.
must be submitted with the application. In case of already affiliated Institutes / Centres, the
drawing should clearly indicate the space of the already affiliated trade as well the applied trade
5.
Documentary evidence regarding availability of Electric Power in the name of the Society / ITC
along with Power sanction order by competent authority, Meter sealing report , latest Electric bill ,
proof of connected load should be attached with the application.
6.
Documentary evidence regarding availability of drinking water and sanitation facilities should be
submitted along with application.
7.
A fire Safety certificate from the Delhi Fire Service Authorities showing that the building is fire safe
/ suitable for running educational institution.
8.
A certificate from the competent authority that the land is not an encroached or agricultural Land.
9.
Buildings for the proposed ITCs must be located on land authorized by the competent authority for
such use.
10.
Land use certificate (Latest) from the Competent Authority Viz. MCD / NDMC / DDA
11.
In the case of temporary / rented buildings on which ITCs are proposed, the sponsoring agency /
individual must be in possession of land on which the new ITC building would be constructed within
a period of 3 years from the date of establishment of the ITC in a temporary / rented building.
Submission of the following particulars of the society / Management of the proposed center is
also must:
1.
Name and address of the Individual Society, controlling / Managing the center.
2.
Copy of Certificates of registration with Registrar of Society.
3.
Date of establishment of Managing Society.
4.
Provision of specific bye-laws / articles authorizing the society to run the center.
5.
Documentary proof of financial status.
6.
Likely budget provision for running the center during an academic year.
7.
Source of income of the Society / Management to run the center.
8.
Quantum of monthly tuition fees etc. proposed to be collected from trainees.
9.
Name of the person authorized to collect the fees.
10.
Any other information about the Society / Management of the proposed center (Attach annexure) /
Profile of the Society and its members.
11.
Justification for the course(s) proposed based on admission preference and employability.
For detailed guidance you may refer the Training Manual for Industrial Training
Institutes and Centres – Second Edition (Updated as of April 2002) a publication of
DGE&T, Govt. of India, Ministry of Labour published by M/s.Tata McGraw Hill
regarding the following:
Procedure for affiliation with NCVT at page No.137 of Training Manual.
Space requirement of ITCs and various trade at page No.171 of Training Manual
Terms & Conditions for affiliation at page No.157 of Training Manual.
The Training Manual and Syllabus of the trade desired to start are available with M/s. New Asian
Publishers, 7/31, 1st Floor, Ansari Road, Daryaganj, Delhi 110 001 (Tel. No. 011 – 23280163) besides
course contents the syllabus contains the list of Tools & Equipments required for the concerned trade.
LIST OF DESIGNATED TRADES COVERED UNDER NCVT, DGE&T, M/o.LABOUR,
GOVERNMENT OF INDIA
NON-ENGINEERING TRADES
S.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
NAME OF THE TRADE
BAKER AND CONFECTIONER
BLEACHING, DYEING & CALICO PRINTING
CABIN / ROOM ATTENDANT
CANE WILLOW & BAMBOO WORK
COMPUTER AIDED EMBROIDERY & NEEDLE
WORK
COMPUTER OPERATOR AND PROGRAMMING
ASSISTANT
CORPORATE HOUSE KEEPING
CRAFTSMAN FOOD PRODUCTION (GENERAL)
CRAFTSMAN FOOD PRODUCTION
(VEGETARIAN)
CRÈCHE MANAGEMENT
CUTTING & SEWING
DAIRYING
ENGINEERING TRADES
S.
NO.
1
2
3
4
5
NAME OF THE TRADE
6
DRAUGHTSMAN (MECHANICAL)
7
8
9
ELECTRICIAN
ELECTRONICS MECHANIC
ELECTROPLATER
10
11
12
FITTER
FOUNDRY MAN (MOULDER)
INFORMATION TECHNOLOGY & ELECTRONICS
SYSTEM MAINTENANCE
INSTRUMENT MECHANIC (GENERAL)
INSTRUMENT MECHANIC (CHEMICAL PLANT)
INTERIOR DECORATION & DESIGNING
LABORATORY ASSISTANT (CHEMICAL PLANT)
LIFT MECHANIC
MACHINIST
MACHINIST (GRINDER)
13
14
15
16
17
18
19
20
21
22
23
DATA ENTRY OPERATOR
DENTAL LABORATORY TECHNICIAN
DESK TOP PUBLISHING
DIGITAL PHOTOGRAPHER
DOMESTIC HOUSE KEEPING
DRESS MAKING
DRIVER-CUM-MECHANIC (LIGHT MOTOR
VEHICLE)
EMBROIDERY & NEEDLE WORK
EVENT MANAGEMENT ASSISTANT
FASHION TECHNOLOGY
FLORICULTURE AND LANDSCAPING
24
FRONT OFFICE ASSISTANT
24
25
HAIR AND SKIN CARE
25
26
HEALTH SANITARY INSPECTOR
26
27
28
29
30
HORTICULTURE
HOSPITAL HOUSE KEEPING
HOSPITAL WASTE MANAGEMENT
INSTITUTION HOUSE KEEPING
27
28
29
30
31
32
33
34
35
36
37
38
39
INSURANCE AGENT
LEATHER GOODS MAKER
LIBRARY & INFORMATION SCIENCE
LITHO – OFFSET MACHINE MINDER
MANUFACTURE OF FOOTWEAR
MEDICAL TRANSCRIPTION
NETWORK TECHNICIAN
OLD AGE CARE
PHOTOGRAPHER
31
32
33
34
35
36
37
38
39
40
41
PLATE MAKER – CUM – IMPOSITOR
PRE/PREPARATORY SCHOOL MANAGEMENT
40
41
20
21
22
23
ARCHITECTURAL ASSISTANT
ATTENDANT OPERATOR (CHEMICAL PLANT)
BUILDING MAINTENANCE
CARPENTER
DRAUGHTSMAN (CIVIL)
MAINTENANCE MECHANIC (CHEMICAL PLANT)
MARINE FITTER
MASON (BUILDING CONSTRUCTOR)
MECHANIC COMMUNICATION EQUIPMENT
MAINTENANCE
MECHANIC REPAIR & MAINTENANCE OF HEAVY
VEHICLE
MECHANIC REPAIR & MAINTENANCE OF LIGHT
VEHICLE
MECHANIC REPAIR & MAINTENANCE OF TWO
WHEELERS
MECHANIC DIESEL / MARINE DIESEL
MECHANIC MOTOR VEHICLE
MECHANIC RADIO & TELEVISION
REFRIGERATION & AIR – CONDITIONING
MECHANIC
MECHANIC TRACTOR
MECHANIC AGRICULTURAL MACHINERY
MECHANIC AUTO ELECTRICAL & ELECTRONICS
MECHANIC COMPUTER HARDWARE
MECHANIC CONSUMER ELECTRONICS
MECHANIC INDUSTRIAL ELECTRONICS
MECHANIC LENS / PRISM GRINDING
MECHANIC MACHINE TOOL MAINTENANCE
MECHANIC MECHATRONICS (EARLIER MECHANIC
ADVANCED MACHINE TOOL MAINTENANCE)
MECHANIC MEDICAL ELECTRONICS
MECHANIC - CUM - OPERATOR (ELECTRONIC
42
43
44
45
46
47
48
(ASSISTANT)
PRESERVATION OF FRUITS AND VEGEABLES
PROCESS CAMERAMAN
SECRETARIAL PRACTICE
STENOGRAPHY (HINDI)
STENOGRAPHY (ENGLISH)
STEWARD
TOURIST GUIDE
49
50
WEAVING OF SILK & WOOLEN FABRICS
WEAVING OF WOOLEN FABRICS
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
COMMUNICATION SYSTEM)
OPERATOR ADVANCED MACHINE TOOL
PAINTER (GENERAL)
PHYSIOTHERAPY TECHNICIAN
PLASTIC PROCESSING OPERATOR ( P.P.O.)
PLUMBER
PUMP OPERATOR CUM MECHANIC
RADIOLOGY TECHNICIAN (RADIO DIAGNOSIS &
RADIOTHERAPY)
SANITARY HARDWARE FITTER
SHEET METAL WORKER
SURVEYOR
TOOL & DIE MAKER (DIES & MOULDS)
TOOL & DIE MAKER (PRESS TOOLS JIGS &
FIXTURE)
TURNER
VESSEL NAVIGATOR
WELDER ( GAS & ELECTRIC)
WIREMAN
SPINNING TECHNICIAN
WEAVING TECHNICIAN
TEXTILE MECHATRONICS