Dear Sir / Madam,
I am a Mechanical Engineer with 13 years of rich experience in Quality Assurance, Quality
Control, Inspection and ISO. I have done Diploma in Industrial Management, Diploma in Total
Quality Management & ISO 9000, Diploma In Environmental Management, and Six Sigma Green
Belt Certified professional.
I am working in an Engineering firm in India as a Manager - Quality Assurance and Management
Representative. And part time / freelance, I am working as a QC Inspector / Supplier Sourcing
Engineer / ISO Consultant. I am representative in India for one Singapore based and one Canada
based Quality Control and Sourcing companies. I am also freelance working for one Taiwan based
quality control and supplier sourcing company for their India office.
My activities
I.
II.
III.
IV.
V.
VI.
VII.
include:
Pre Dispatch Inspection
During Production Inspection
Initial Production Inspection
Container Loading Inspection
Inspection at Port
Factory Audit / SA8000:2008
System Audit ISO9001:2008 (QMS), ISO/TS16949:2009 (TS), ISO14001:2004
(EMS)
VIII. Supplier Sourcing, Verification and Development
I have experience of inspecting as per AQL standard ANSI/ASQ Z1.4-2008 following items:
1. Plastic products like Jerry cans, Buckets, Bore well pipes etc.
2. Engineering and automotive products like machined components, plastic and rubber
molded components, stamped components, etc.
3. Education kits (consists of note books, world globe, black board, compass boxes, more
than 150 items in a education kit)
4. Aluminium and Stainless Steel utensils and kitchenware usually all types. For e.g. Ice
Bucket, Ice Cream Maker, Ice Tong, Malt Cup, Spoons, Plates, Bar Shaker, Coffee
Decanter, Jug, etc.
5. Blankets, rugs and carpets
6. Sports Kit
7. Toys
8. Tarpaulins
9. Hygiene Kits (consisting of 14 items)
10. Hand pumps and its accessories
11. Jewellery products (gold & diamond)
12. Food Products
13. Farm kits or Agricultural tools
14. Fish hooks, twine, floats
15. First Aid kits
16. Boats
17. Sundries Products
18. Safety Matches – Book Matches, Kitchen Matches, Pocket Matches, Box Matches.
19. Resin Figurines
20. Candles
21. Handicrafts items in Wood and Brass
22. Gift Articles
23. Wooden Samples
So if you are looking for product quality control or sourcing in India, please feel free to contact
me. I am attaching my resume herewith.
Regds
Mr. Shivom Singh Bisht
Mobile No. 09322951403
Skype ID : shivom.bisht
Email ID : shivom2k2@hotmail.com
Position Applied For
:
Tel. No.
Email ID
: Res. 2965 3013 / 9322951403
: shivom2k2@hotmail.com
shivombisht@indiatimes.com
Birth Date : 7th December, 1978.
Passport No. : H0581771
Name : Shivom Singh Bisht
Add. : Room No. 6, Rajanigandha Niwas,
Anandwadi Road, Shivaji Nagar,
Kurar Village, Malad (East)
Mumbai-400 097.
CURRICULUM VITAE
Objective
: Looking for a long term appointment as a Middle or Senior Position in a
renowned organization in the field of Quality, Process & Production.
Experience
:
I) Two years as a Manager - Quality & Management Representative – QMS, ISO/TS and EMS
in ALMIGHTY AUTO ANCILLARY PVT. LTD., Taluka - Wada, District - Thane.
Company Profile
: A fast growing ISO 9001:2008, ISO/TS 16949:2009 and
ISO14001:2004 certified company, engaged in the manufacturing &
supply of components for automotive & industrial applications.
Products
: 1. Wash & Wiper System (Without motor)
2. Bar Pins
3. Pressure Die Casting Parts
4. Injection Molded Parts
5. Sheet metal stamped & welded components
Customers
: OEM (Original Equipment Manufacturers)
1. Wexco (Volvo – Mack), U.S.A.
2. Tenneco Automotive Inc., U.S.A.
3. SRI (Speciality Resources Inc.), U.S.A.
4. GEM (Global Electric Motors)
5. CVG (Commercial Vehicles Group) Inc.
6. International Trucks & Engine Corporation (ITEC)
7. Ring Automotive Ltd.
Job Profile
►
►
►
►
►
►
►
►
►
►
►
►
►
►
:
To qualify the development of new products / projects & to establish & set the
Control plan & Quality procedure for the same.
To analyze the root cause for failures & provide error and mistake proof solution to
improve the process & quality.
To identify process key parameters & setting adapted specifications, operating
methods & verification plans in order to optimize work, quality & production.
To assure incoming, in-process & outgoing quality of products.
To conduct Quality Circle meeting for quality related issues.
To publish daily yield report, scrap % report, outgoing quality report, trend charts &
control charts.
To prepare weekly cost reduction assignments, productivity & quality
improvement plans on Value Engineering &Value Analysis methods.
Development of new suppliers, up gradation of existing suppliers & execution of
supplier rating depending upon Quality, Quantity & Timeliness delivery.
Heading the documentation department.
Heading the training department.
Responsible for the measurement management system.
To interact with Customers regarding quality issues & build healthy relationship
with customers.
To give the feedback to Customer regarding quality issues, problems, deviations.
and to give CAPA (Corrective & Preventive Action) & G8D to customers.
Knowledge of PPAP (Production Part Approval Process), APQP (Advanced Product
Quality Planning), Seven QC Tools, Six Sigma, Kaizen, 5S, TQM, TPM, FMEA (Failure
Mode & Effects Analysis), Measurement System Analysis (MSA), DPPM (Defective
Parts Per Million), DPU (Defects Per Unit), D.O.E. (Design Of Experiments), AQL
(Acceptance Quality Level), LAR (Lot Acceptance Ratio), OGQA (Out going Quality
Audit), OBA (Out of Box Audit), JIT, Kanban, Lean Manufacturing, One Piece Flow,
Jidoka, Kaizen, etc.
Job Profile as a Management Representative – QMS, ISO/TS and EMS
►
►
►
►
►
►
►
►
►
:
To ensure that a quality / environmental management system is established,
implemented and maintained in the organization.
Working for Environmental Management System (E.M.S.) ISO14001:2004
implementation.
To establish the quality policy and quality objectives.
To liaison with certification bodies or third parties.
To prepare Internal Quality / Environmental Audit plan & execute accordingly.
To ensure that appropriate and adequate corrective action is instituted on the nonconformities observed during internal quality audits.
To conduct Management Review Meeting & report performance of the departments
through data analysis or process measurable to top management via Management
Review Meeting.
To look after the documentation work like Process Instruction. Work Instruction,
Quality Management Plan, Quality System Procedure, Various line formats based on
ISO 9001 / TS 16949 / ISO 14001 requirements.
Identify relevant training needs to employees & arrange for internal or external
training of employees.
II) Worked as a Manager - Quality and Management Representative at M/S. QUICK
INDUSTRIAL SUPPLIERS PVT. LTD., Vasai (East), Thane.
Period
: September 2006 to September 2007
Company Profile
: Fast Growing ISO 9001:2000 Certified company, one of the
Major approved Supplier of Mahindra & Mahindra Ltd, engaged in
manufacturing of various sheet metal components, press
components & fabricated components for automotive industries.
III) One year as a Quality Control Executive in ELEGANT COLLECTION, Mumbai.
Period
: August 2005 to August 2006.
Company Profile
: An ISO9001 company engaged in the business of design &
manufacture of studded & plain jewellery items.
IV) Two years as a Quality Assurance/Quality Control Executive at KGK ENTERPRISES.
Period
: March 2003 to July 2005.
Company Profile
: An ISO9001 MNC engaged in design, manufacture & export of
Loose Diamonds & studded jewelleries.
V) Two years as a Quality Assurance/Quality Control Engineer at M/S. CELETRON
INDIA PVT. LTD., SEEPZ, Andheri (East), Mumbai- 400096.
Period
: 28/11/2000 to 14/01/2003.
Company Profile
: A USA based ISO 9002 MNC engaged in design, manufacture &
export of Hi-tech quality & precision electronic hardware products.
VI) Two years as a Quality Assurance/Quality Control Engineer at M/S. MADAN Metals, Kashi
Mira, Thane.
Period
: 03/09/1998 to 07/09/2000.
Company Profile
: Manufacturers & exporters of Stainless Steel Utensils drawn &
spun sheet metal components.
In-plant Training
:
i) Six months at M/S. KEC INTL LTD., Kurla, Mumbai.
Period
: 01/07/1996 to 31/12/1996.
Company Profile
: Fabricators of Power Transmission Towers.
ii) Six months at M/S. MAZAGON DOCK LTD., Dockyard Road, Mumbai.
Period
: 15/12/1997 to 14/06/1998.
Company Profile : Fabricators of Ship Building, Submarines, Off-shore Platforms &
Ship Repairing.
Job Profile
: Production Engineer.
Major Achievements
►
►
►
►
►
:
Shop floor Cumulative Yield improvement from 37% to 93% in Celetron India
Pvt. Ltd.
Five successful certification audit of ISO. ISO9001:2000 – 1 No., ISO9001:2008
- 2 Nos. and ISO/TS16949:2009 – 1 No. and ISO14001:2004 – 1 No.
Productivity improvement and Automation Process Introduction in KGK
Enterprises.
Production Cost improvement in KGK Enterprises
Inventory cost control in Thermolab Scientific Equipments Pvt. Ltd. from Rs. 3.5
Cr. to Rs. 2 Cr. within three months.
Educational Qualification
►
►
Passed LME (Licentiate of Mechanical Engineering) with 70% from Veermata
Jijabai Technological Institute (V.J.T.I.) Mumbai in July 1998.
Passed SSC with 90.14% from Mumbai University in March 1994.
Professional Qualification
►
►
►
►
►
:
:
DIM (Diploma in Industrial Management) from Prin. L.N. Welingkar
Institute of Management, Development & Research in May 2000 with 63%.
Diploma in “Total Quality Management & ISO 9000” from Indian Institute of
Management And Technology in September 2003.
“Diploma in Environmental Management & ISO 14000” from Indian Institute of
Management And Technology.
Appeared for “Six Sigma Green Belt” from IACT.
Member of ISHRAE (Indian Society of Heating Refrigeration Heating and Air
Conditioning Engineers)
Languages Known
: English, Hindi & Marathi.
Current CTC
: Rs. 7,20,000 p.a.
I hereby declare that all the information provided above is true to the best of my
knowledge.
Date
Place
: 09.12.2011
: Mumbai.