EXPORT PRODUCT CATALOGUE
（REFINERY AND OIL FIELD CHEMICALS）
REFINERY & CHEMICAL PRODUCT EXPORT
DIVISION
MARCH, 2010
CONTENT
Refinery Additives .................................................................................................................. 4
Oil Soluble Demulsifier (Emulsion Breaker) ........................................................................... 4
Water Soluble Demulsifier (Emulsion Breaker) ...................................................................... 5
CO Combustion Promoter ........................................................................................................ 6
Dimethyl Disulfide ................................................................................................................... 7
High-Efficiency Desulphurizer ................................................................................................ 8
Slurry Oil Antifouling Agent .................................................................................................... 9
Light Olefins-enhancing FCC Catalyst .................................................................................. 10
Catalytic Molecular Sieve Antiscorching Activator ............................................................... 11
Catalytic Cracking Sulphur Reducing Agent ......................................................................... 12
Sweetening Activator ............................................................................................................. 13
Neutralizing Corrosion Inhibitor ............................................................................................ 14
Antifouling Agent for Heat Exchangers of Hydrotreating Feedstock.................................... 15
Defoaming Agent for Delayed Coking Unit .......................................................................... 16
Special Decoking Agent for Delayed Coking Units .............................................................. 17
Sulfonated Cobalt Phthalocyanine Catalyst ........................................................................... 18
Polyphthalocyanine Cobalt Catalyst ...................................................................................... 19
Chemical Addtives ................................................................................................................ 20
Antifoulant for Caustic Washing System (Yellow Oil Inhibitor) ........................................... 20
Coking Inhibitor ..................................................................................................................... 21
Polymerization Inhibitor ........................................................................................................ 22
4-tert-Butylcatechol ................................................................................................................ 23
Cobalt Acetate ........................................................................................................................ 24
Manganese Acetate ................................................................................................................. 25
Antimony Triacetate ............................................................................................................... 26
Antimony Tris-ethylene glycol .............................................................................................. 27
Calcium Hypochlorite Granular ............................................................................................. 28
Etherification Resin Catalyst .................................................................................................. 29
β-Mercaptoethanol ................................................................................................................. 30
Triethyl Aluminum ................................................................................................................. 31
Tetrabromoethane ................................................................................................................... 32
Hydrobromic acid ................................................................................................................... 33
Chemical Fiber Additives .................................................................................................... 34
Titanium Dioxide - Titania ..................................................................................................... 34
Sodium Methyl Sulfonate....................................................................................................... 35
1
Plastic Additvives.................................................................................................................. 36
Antioxidant 1010 .................................................................................................................... 36
Antioxidant 1076 .................................................................................................................... 37
Antioxidant 168 ...................................................................................................................... 38
Antioxidant BHT, 264 , T501 ................................................................................................. 39
Heavy Tar Stearic Acid Calcareous ........................................................................................ 40
Zinc Stearate ........................................................................................................................... 41
Hydrated Magnesium Silicate ................................................................................................ 42
Glyceryl Monostearate ........................................................................................................... 43
Erucamide............................................................................................................................... 44
Oleamide ................................................................................................................................ 45
Ion Exchange Resins ............................................................................................................ 46
Gel and Macroporous Strong Base Anion Exchange Resins ................................................. 46
Gel-type Polystyrene Strong Cation Exchange Resins .......................................................... 47
Water Treatment Chemicals ................................................................................................ 48
Polyaluminum Chloride ......................................................................................................... 48
Lubricant Additives.............................................................................................................. 49
T151, Mono-Succinimide....................................................................................................... 49
T161, High Molecular Weight Succinimide Ashless Dispersant ........................................... 50
T101 Lowbased petroleum calcium sulfonate ....................................................................... 51
T106 High Base Synthetic Calcium Sulfonate....................................................................... 52
T803B, poly-α-Olefine ........................................................................................................... 53
S206, Calcium Sulphurized Ackgl phenate ............................................................................ 54
T202, Zinc Di-Alky Dithio phosphate ................................................................................... 55
T203, Zinc Di-I-octyl Dithio phosphate................................................................................. 56
Benzene Ramification, Metal Deactivator T551 .................................................................... 58
T746, Dodecylene Maleic Acid .............................................................................................. 59
T152, Bis-Succinimide ........................................................................................................... 60
T801, Alkyl Naphthalene ....................................................................................................... 61
H4205, General Gear Oil Compound..................................................................................... 62
H5039, Antiwear Hydraulic Fluid Additive Package ............................................................. 63
T304, Antiwear Additive, Dibutyl phosphite ......................................................................... 64
Fuel Oil Additives .................................................................................................................65
Gasoline Stabilizing Additives ............................................................................................... 65
Antistatic Agent for Gasoline and Diesel ............................................................................... 66
Antioxidannt 2.6.4(Com.Grade)(T 501) ................................................................................ 67
Diesel-Oil Cetane Number Improver ..................................................................................... 68
Diesel fuel flow improver ...................................................................................................... 69
2
Solvent ................................................................................................................................... 70
P-DEB (Para-Di-ethyl Bezene) .............................................................................................. 70
Sulfolane................................................................................................................................. 71
Adsorbent .............................................................................................................................. 72
High Efficiency Particulate Clay (Granule Clay) .................................................................. 72
Activated Clay ........................................................................................................................ 73
Oil Drilling Chemicals ......................................................................................................... 74
Complex ionic acrylate........................................................................................................... 74
Sulfonated phenol-formaldehyde resin .................................................................................. 75
Ammonium Hydrolyzed Polyacrylonitrile ............................................................................. 76
Sodium Carboxymethyl Cellulose(LV) .................................................................................. 77
Sodium Carboxymethyl Cellulose(CMC-HV) ....................................................................... 78
Sulfonated Tannin................................................................................................................... 79
Sulfonated lignite ................................................................................................................... 80
Sulfonated Asphalt ................................................................................................................. 81
Potassium Polyacrylamide ..................................................................................................... 82
Hydrolyzed Polyacrylonitrile Potassium................................................................................ 83
Hydrolyzed Polyacrylamide Powder ...................................................................................... 84
Barite Powder ......................................................................................................................... 85
Sefstromite Powder ................................................................................................................ 86
Ilmenite Powder ..................................................................................................................... 87
Oil Production Chemicals .................................................................................................... 88
Crude Oil Paraffin Inhibitors & Removers ............................................................................ 88
Viscosity Reducer for viscous crude ...................................................................................... 89
Crude Oil Demulsifier ............................................................................................................ 90
Acid Fracturing Chemicals ................................................................................................. 91
Hydroxyl Guar Gum............................................................................................................... 91
Fracture Proppant ................................................................................................................... 92
Clay Stabilizer ........................................................................................................................ 93
Cleanup Additive .................................................................................................................... 94
Tertiary Oil Recovery Chemicals ........................................................................................ 95
Polyacrylamide ....................................................................................................................... 95
DYD Type Surfactants for EOR............................................................................................. 96
Petroleum Sulfonate ............................................................................................................... 97
3
Refinery Additives
Refinery Additives: Oil Soluble Demulsifier
Oil Soluble Demulsifier (Emulsion Breaker)
【Product Name】
Product Name: Oil Soluble Demulsifier (Emulsion Breaker)
【Quality Index】
1. Outer appearance
2. Relative Density 20℃
amber, viscous liquid
g/cm3
0.85 -0.99
3. Product Color APHA
≤ 300
4. PH Value
6~9
【Application】
This product can be used by refineries as an aiding agent for dehydrating and desalting in the
electric desalting system of the crude oil. It carries the characteristic of low dehydrating temperature,
quick dehydrating speed, low water content in the dehydrated oil, high desalting ratio and clear
dehydrated water.
【Recommended Dosage】
Subject to the specification of oil, normal injection is around 20ppm.
【Storage & Packaging】
This product is packed in clean and dry iron drums of net weight 180kg each.
Avoid violent collision during transportation so as to prevent breakage.
【Precautions】
This product obsorbs moisture and the package must be air tight.
Avoid direct sun light. Open flames prohibited. To be kept in a dry and well ventilated
warehouse.
4
Refinery Additives: Water Soluble Demulsifier
Water Soluble Demulsifier (Emulsion Breaker)
【Product Name】
Product Name: Water Soluble Demulsifier (Emulsion Breaker)
【Quality Index】
1、Outer appearance
2、Density 20℃
Colorless or light-yellow liquid
g/cm
3
0.90-1.20
3、Kinematic viscosity 40℃ mm /S
＜ 40
4、Solubility
Soluble in water and ethanol
5、PH（1% aqueous solution）
6.00 ~ 9.00
2
【Application】
This product can be used by refineries as an aiding agent for the water-wash electric desalting
of the crude oil, to realize quick demulsifying and dehydrating effects.
It is also applicable to oil
fields for the demulsification and dehydration of the crude oil.
【Recommended Dosage】
Under normal conditions, 30~50ppm.
【Storage & Packaging】
This product shall be stored in a shady, cool, ventilated, dry warehouse.
The shelf life is 2 years.
This product is packed in iron drums of net weight 180kg each.
【Precautions】
This product is flammable, therefore, shall be kept far away form open flame.
5
Refinery Additives: CO Combustion Promoter
CO Combustion Promoter
【Product Name】
Product Name: CO Combustion Promoter
【Molecular Formula/Structural Formula】
Pt/Al2O3
【Performance Characteristics】
Good combusion-supporting results, fast reaction and high conversion(over 95%), contributing
to the elimination of carbon deposition to recover the activity of the catalyst, improvimg light oil
absorption rate (2-3%), reducing coke content ( 0.5%).
【Quality Index 】
Implementing Manufacturer’s Standards
items
Active component （%）
type
quality index
1
Pt;0.01±0.0005
2
Pt;0.02±0.001
3
Pt;0.03±0.002
5A
Pt;0.05±0.002
5B
Pt;0.05±0.002
A12O3%
≥ 95
Fe2O3(%)
≤0.06
Na2O(%)
≤0.5
Specific surface area (m2/g)
100-260
Stacking denstiy (g/ml)
0.85-1.05
Particle size distribution (%)
40-105u
Relative conversion
≥60
≥95
【Application】
Regenerative combustion-supporting agent used in the catalytic cracking unit.
【Recommended Dosage】
The system inventory is 0.1-5% of which of the FCC equilibrium catalyst. Its recruitment is
1-3% of the additional amount of FCC catalyst per day after normal combustion.
【Storage & Packaging】
1.Plastic buckets and cardboard drums lined with plastic bags. 40kg net per barrel or
determined by the user. Marked outside of the bucket: product name, number of the implementated
standard, production date, shelf life, the name, address, telephone of producer and so on.
2.Prevent the sun and rain in the transport. The product should be stored in dry ventilated
database, should be moisture-proof, and prevent pollution. The storage temperature should be above
0 degree celcius.
【Precautions】
Moistureproof, prevent chemical pollution.
6
Refinery Additves: Dimethyl Disulfide
Dimethyl Disulfide
【Product Name】
Product Name: Dimethyl disulfide
Synonyms: Dimethyldisulfide; 2,3-Dithiabutane; Sulfa-Hitech; DMDS
CAS Registry Number: [ 624-92-0 ]
【Molecular Formula/Structural Formula】
Formula: C2H6S2
Molecular Weight: 94.2
【Quality Index 】
Specifications
Appearance:
Purity (%):
Methyl mercaptan (%):
Dimethyl sulfide (%):
Moisture (ppm):
Dimethyl Polysulfide (%):
Sulfur content (%):
colorless to yellowish liquid
99.5 min.
0.1 max.
0.1 max.
600
0.2 max.
68 min.
【Application】
Used as an activator in hydrodesulfurization process of oil refinery, and in resulfurization
process, an inhibitor in cracking coking of petrochemicals, also an intermediate for solvent and
pesticides.
【Packaging】
200 kg net in galvanized drum, PE drum or ISO tank.
7
Refinery Additives: High Efficiency Desulphurizer
High-Efficiency Desulphurizer
【Product Name】
Product Name:
【Quality Index】
High-Efficiency Desulphurizer
Outer appearance
Density 20℃
Colorless or light-yellow liquid
g/cm3
Kinematic viscosity 20℃
Freezing point
1.035-1.055
mm2/S
90-115
≤ -45
℃
Refractive index 20℃
1.4600-1.4700
Solubility
Intersoluble with water
Content (main component)
%
≥ 95
【Application】
It is mainly used for removing H2S from refinery gas and natural gas.
【Recommended Dosage】
Dilute the desulfurizer with demineralized water into a solution of 30~40% concentration, the
ratio between desulfurizer and hydrocarbon shall be kept at 1:4.
【Storage & Packaging】
This product shall be stored in a shady, cool, ventilated, dry warehouse.
The shelf life is 2
years.
This product is packed in galvanized iron drums of net weight 200kg each.
【Precautions】
This product is flammable, therefore, shall be kept far away from open flame.
8
Refinery Additives: Slurry Oil Antifouling Agent
Slurry Oil Antifouling Agent
【Product Name】
Product Name: Slurry Oil Antifouling Agent (Slurry Scale Inhibitor)
【Quality Index】
Outer appearance
Brownish red liquid
Density 20℃ g/cm3
0.87-0.95
Kinematic viscosity 20℃ mm2/S
10 ~ 50
Freezing point
℃
≤ -25
【Application】
This agent is for inhibiting scale formation and coking in the slurry heat-exchange system of heavy-oil
catalytic cracking units, and thus improving the efficiency of heat exchange and prolonging the working
cycle of facilities.
【Recommended Dosag】
150~300ppm of this product shall be maintained in the circulating slurry
【Storage & Packaging】
This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years.
This product is packed in galvanized iron drums of net weight 170kg each.
【Precautions】
This product is flammable, therefore, shall be kept far away form open flame.
9
Refinery Additives: Light Olefins-enhancing FCC Catalyst
Light Olefins-enhancing FCC Catalyst
【Product Name】
Product Name: Light Olefins-enhancing FCC Catalyst
【Performance Features】
It is used in (FCC equipments to improve the yield of propylene(up 1%), butylene(up 0.5%)
and ethylene.
【Quality Index】
Item
Loss on Ignition , m%
Al2O3, m%
Abrasion Index , m%/h
Apparent Density, g/ml
Specific Area , m2 /g
Pore Volume, ml/g
0-40 μm,v%
0-149 μm,v%
Specifications
≤ 10
≥25
≤ 3.0
0.60-0.75
≥60
≥0.06
≤ 22
≥90
Test Methods
RIPP32-90
RIPP42-90
RIPP29-90
RIPP32-97
GB/T5816-1995
RIPP151-90
QJ/CL.4.2.009
【Storage & Packaging】
To be stored in shady, cool, well ventilated dry warehouse. Shelf life is 2 years.
Packaged in double layer woven sacks lined with cloth, 25 kg net weight each.
【Precautions】
The product is non-flamable, non-explosive, non-corrosive and non-toxic. Keep away from
moisture, acid, alkaline and other chemical pollution.
10
Refinery Additives: Antiscorching Activator
Catalytic Molecular Sieve Antiscorching Activator
【Product Name】
Product Name: Catalystic Moluecular Sieve Antiscorching Activator
【Application】
The surface activity, acidity and rare-earth metal act together and improve respectively the
viscosity of the feed stock, the acidity of B-acid and L-acid of the primary catalyst and the hydrogen
transfer reaction, and hence effectively improve the atomization and vaporization effect of feed
stock, the activity and selectivity of primary catalyst and contribute to the catalytic cracking
reaction, increase the yield of LPG, gasoline and diesel ( the proportion of these three products
depends on the characteristics of the feed stock oil, the property of the catalyst, the feature of the
process, operating condition and production plan), with a increase of toal liquid yield of above
1.5%(m), at the same time, slow down the deactivation speed of the catalyst caused by poisonous
substances such as alkaline nitrogen compound and heavy metals. By keeping the activity of the
catalyst at a high level, remarkable economic benefits is achieved. The additive can be used for
RFCC, MGD, ARGG and DCC plants.
【Performance Features】
This additive is an oil soluble liquid, non flammable, non explosive, not corrosive to the
equipment. Mix it directly with the feed stock oil, and no modification of plant process parameters
is needed. Easy injection, without influence to the load of the plant. It functions in the form of
homogeneous molecules, and does not cause scorching, polution or aging.
【Quality Index】
Appearance
Brown liquid
Density（20℃，g/cm3）
0．85～1.00
Solubility
Intersoluble with oil
Freezing Point ℃
≤-20
Effective substance content
≥70%
【Recommended Dosage】
Using metering pump, inject at the inlet of the feed stock pump and mix uniformly with FCC
feed stock.
Reference Dosage: 60～100ppm in fresh feed stock。（in higher speed period, the injection
shall be 200ppm，for 5～7 days.）
【Storgae & Packaging】
Packed in iron drums, net weight 180kg each. To be stored in clean, cool, well ventilated dry
warehouse. Keep away from flames. Shelf life is 1 year.
11
Refinery Additives: Catalytic Cracking Sulphur Reducing Agent
Catalytic Cracking Sulphur Reducing Agent
【Product Name】
Product Name: Catalytic Cracking Sulphur Reducing Agent
【Application】
It is used to reduce the sulphur content of gasoline and diesel by 20 ～ 30 %; it can also
improve the activity of catalysts.
【Quality Index】
Item
Specifications
Test Methods
Effective Content, m %
≥15
atomic absorption
Appearance
light yellow - yellowish
eye survey
brown liquid
Density, g/ml
1.30-1.45
GB/T 2540-81
Viscosity(50 ℃), mm2 /s
15-20
GB/T 265-88
Solidifying Point, ℃
< -25
GB/T 510-83
Decomposition Temp., ℃
> 200
Solubility
freely soluble in water
eye survey
pH value
PH=4.0-7.0
PH meter
【Storage & Packaging】
This product is packed in 200L iron drums.
This product shall be stored in a shady, cool, ventilated, dry warehouse.
The shelf life is 2 years.
【Precautions】
The product is non-flamable, non-explosive and non-toxic.
12
Refinery Additives: Sweetening Activator
Sweetening Activator
【Product Name】
Product Name: Sweetening Activator
【Application】
Products of the sweetening activator series are used to remove the thioalcohol from the
alkali-free deodorization of catalytic gasoline. It has the properties such as easy infusion, high
deprivation rate of low-molecular thioalcohol as well as high-grade thioalcohol. The total
deprivation rate is about 90-95%. The products can also relieve the problem of oil-vapor corrosion.
【Quality Index】
No.
1
2
3
4
Item
Outer appearance
Active-constituent Content %
（ m/m ）
Chloride ion %
Density 20 ℃ g/cm 3
Standard indicators
A
B
Light-yellow to redbrown liquid
≥ 8.0
＜ 0.5
0.80~0.95
0.90~1.00
【Storage & Packaging】
This product is packed in plastic barrels. The net weight is 170kg /barrel.
This product shall be stored in well ventilated, dry, shady, cool warehouses. The shelf life is 2
years.
13
Refinery Additives: Neutralizing Corrosion Inhibitor
Neutralizing Corrosion Inhibitor
【Product Name】
Product Name: neutralizing corrosion inhibitor
【Application】
The neutralizing corrosion inhibitor is made by compounding the film-forming agent and the
neutralizing agent. It has both functions of neutralization and film forming, and is widely used by
refineries in the condensing and cooling system on the fractioning tower top for effectively
preventing the dew point corrosion at phase-transition positions so as to extend the service life of
the equipment and ensure a long-period safe operation of the production facilities.
【Quality Index】
No.
1
2
3
4
5
Item
Outer appearance
Density 20 ℃ g/cm 3
Solubility
Neutralizer Content %
Corrosion-mitigation rate %
Standard indicators
A
B
Colorless to light mauve
0.95~1.05
Mutually soluble with water
30~35
50~55
≥ 97
【Storage & Packaging】
This product is packed in plastic barrels with a net weight of 180 kg /barrel.
This product shall be stored in well ventilated, dry, shady, cool warehouses.
The shelf life is 2 years.
14
Refinery Additives: Antifouling Agent (Scale Inhibitor)
Antifouling Agent for Heat Exchangers of Hydrotreating Feedstock
【Product Name】
Product Name: Antifouling Agent (Scale Inhibitor) for Heat Exchangers of Hydrotreating
Feedstock
【Quality Index】
1、Outer appearance
2、Density 20℃
Brownish red liquid
g/cm
3
0.87-0.95
2
3、Kinematic viscosity 50℃ mm /S
4、Freezing point
℃
≤ 50
≤ -30
【Application】
This product prevents coking and scale-forming in the feedstock heat exchangers of gasoline
and diesel hydrotreating units, improves the heat-transfer effect of the heat exchangers, and hence
prolong the working cycle of the processing units.
【Recommended Dosage】
The recommended dosage is usually 50-150ppm.
It will present better effects if used in clean
pipelines when the Hydrotreating Unit is put in use for the first time.
【Storage & Package】
This product shall be stored in a shady, cool, ventilated, dry warehouse.
The shelf life is 2
years.
This product is packed in galvanized iron drums of net weight 170kg each.
【Precautions】
This product is flammable, therefore, shall be kept far away form open flame.
15
Refinery Additives: Defoaming Agent for Delayed Coking Unit
Defoaming Agent for Delayed Coking Unit
【Product Name】
Product Name: Defoaming Agent for Delayed Coking Unit
【Quality Index】
1、Outer appearance
light-yellow liquid
2、Density 25℃ g/cm3
≥0.83
3、Kinematic viscosity 25℃ mm2/S ＜ 150
4、Freezing point
≤ -30
℃
5、Solubility
Inter-soluble with diesel oil
6、Flash point (closed)
℃
≥60
7、Effective constituent
%
≥25
【Application】
This product is used in delayed coking units to inhibit the foaming in the coking tower during
the coke-formation process, lower the foam height, improve the utilization rate of the coking tower
and add to the processing capacity of the delayed coking unit.
【Recommended Dosage】
30~100ppm in proportion to the feedstock being processed.
【Storage & Package】
This product shall be stored in a shady, cool, ventilated, dry warehouse.
The shelf life is 2
years.
This product is packed in galvanized iron drums of net weight 170kg each.
【Precautions】
This product is flammable, therefore, shall be kept far away form open flame.
16
Refenery Addives: Decoking Agent for Delayed Coking Units
Special Decoking Agent for Delayed Coking Units
【Product Name】
Product Name: Special Decoking Agent for Delayed Coking Units
【Quality Index】
1、Outer appearance
Brownish red liquid
2、Density 25℃ g/cm3
0.87-0.97
3、Kinematic viscosity 50℃
4、Freezing point
mm2/S
℃
5、Solubility
≤ 50
≤ -20
Inter-soluble with diesel oil
【Application】
This product is used in delayed coking units to prevent coke & scale formation, strip the coke
scale off the pipe walls of the equipment, improve the heat-transfer coefficient of the heat
exchanger and the heater, reduce the energy consumption, extend the working cycle of the units,
and hence add to the economic benefits.
【Recommended Dosage】
Usually 50-150 ppm in proportion to the amount of the feedstock being processed
【Storage & Packaging】
This product shall be stored in a shady, cool, ventilated, dry warehouse.
The shelf life is 2
years.
This product is packed in galvanized iron drums of net weight 170kg each.
【Precautions】
This product is flammable, therefore, shall be kept far away form open flame.
17
Refinery Additive: Sulfonated Cobalt Phthalocyanine Catalyst
Sulfonated Cobalt Phthalocyanine Catalyst
【Product Name】
Product Name: Sulfonated Cobalt Phthalocyanine Catalyst
【Molecular and Structural Formula】
Molecular Formula: Co(C32H16N8O6S2)
【Quality Index】
Appearance:
Odor:
Relative Density 25℃ kg/L
Water-solubility:
Flamability:
Stability:
Residue on Sieve (0.2mm):
Cobalt content (dry base)
Sweetening activity:
Dark blue powder
Odorless
1.05-1.1
difficult; alkali soluble
difficult; flammable in the air at 250℃ or higher
stable at normal temperature and pressure
≤ 15%
≥ 6.0%
mercaptan sulfur from 100*10-6 to below 10*10-6
【Application】
Mainly used in the sweetening of light oil products.
【Recommended Dosage】
Dissolve the catayst in 10% alkali solution. 1 kg catalyst sweetens more than 20,000 MT light
oil products. If using active carbon or molecular sieve as carrier in a fixed bed process, 1 kg catalyst
sweetens 65,000 MT light oil products.
【Storage & Packaging】
This product is packed in 2 kg plastic bottles. Avoid violent collision during transportation.
Avoid direct sunlight and rain. It absorbs moisture easily, and must be stored in a well ventilated dry
warehouse..
【Precautions】
Do not mix with strong oxidants to prevent combustion.
18
Refinery Additives: Polyphthalocyanine Cobalt Catalyst
Polyphthalocyanine Cobalt Catalyst
【Product Name】
Product Name: Polyphthalocyanine Cobalt Catalyst
【Molecular and Structural Formula】
Molecular Formula: ﹝CoC32H8N8O8﹞nC4H2O8
【Quality Index】
Appearance:
Dark blue powder
Odor:
Odorless
Relative Density 25℃ kg/L
0.50-0.60
Water-solubility:
difficult; alkali soluble
Flamability:
difficult; flammable in the air at 250℃ or higher
Stability:
stable at normal temperature and pressure
Cobalt content (dry base)
≥ 5.5%
Sweetening activity:
mercaptan sulfur from 100*10-6 to below 10*10-6
【Application】
Mainly used in the sweetening of light oil products.
【Recommended Dosage】
Dissolve the catayst in 10% alkali solution. 1 kg catalyst sweetens more than 20,000 MT light
oil products. If using active carbon or molecular sieve as carrier in a fixed bed process, 1 kg catalyst
sweetens 65,000 MT light oil products.
【Storage & Packaging】
This product is packed in 1kg plastic bottles. Avoid violent collision during transportation.
Avoid direct sunlight and rain. It absorbs moisture easily, and must be stored in a well ventilated dry
warehouse..
【Precautions】
Do not mix with strong oxidants to prevent combustion.
19
Chemical Addtives
Chemical Addtives: yellow oil inhibitor
Antifoulant for Caustic Washing System (Yellow Oil Inhibitor)
【Product Name】
Product Name: Antifoulant for Caustic Washing System (yellow oil inhibitor)
【Formula and Structure type】
It is mixture, so there is not formula or structure type, it only contains C, H, O and N elements,
non-halogen or heavy metals
【Performance】
The performance of additive mainly contains two parts:
(1) the additive contains the polymerization inhibitors chemical components, they can eliminate
the oxygen dissolved in the solution, passivate the metal ions , reduce the free radicals, suspend the
chain growth of the polymerization
(2) the additive contains the cleaning-dispersing chemical components, they can disperse the
yellow oil(polymer),clean the surface of the device, improve the effect of the gas caustic washing
【Quality Index】
The additive is colorless or yellow liquid; it is stable, alkaline, and irritant to the human body.
Amine number， KOH mg/g
Density，
20℃ ，g/cm3
Freezing point，
℃，
Flash Point(close mouth cup, ℃)
≥100
0.950 ~ 1.150
≤-20
＞62
【Application】
The additive is used for polymerization inhibitor or anti-fouling in the cracked gas caustic
washing system of ethylene cracking plant
【Recommended Dosage】
The injection amount of the additive is 20-50μg/g,based on the total flow of the three olefins of
the cracked gas, here the three olefins are ethylene, propylene and butadiene.
【Storage & Packaging】
Storage: It is inflammable, micro-toxic, should be away from fire or heat sources when storage
Package: plastic barrels. Net weight: 200kg.
【Precautions】
(1) the injection point of the additive is depending on the process, makes the additive fully mix
into the water solution.
(2) the additive should be uniformly injected into the water solution by metering pumps, it can
be diluted depending on the requirements.
20
Chemical Additives: Coking Inhibitor
Coking Inhibitor
【Product Name】
Product name: coking inhibitor
【Performance Features】
The product is fully decomposed at 600℃, part of it results into intermediate product
HS free radical which will react with metal surface of furnace tube to give metal sulfides,
passivate the metal surface, reduce the catalytic activity on furnace tube surface, and
inhibit coking from heterogeneous catalysis; the other part of it changes the reaction
process of free radical and product distribution, and inhibit coking from homogeneous
catalysis.
【Quality Index】
Item
Specification
Clear transparent liquid
g/cm3
0.93～1.03
Appearance
Density（20℃）
，
Viscosity（25℃）
，
mPa·s
Flashpoint(℃)
Purity of active organic sulfur，
%
<12
>15
≥96
【Application】
It is mainly used for coking inhibition in ethylene cracking furnace (gaseous), with
functions of extending the running period of cracking furnace, delaying the wear of
furnace tube, and reducing the generation of CO effectively.
【Recommended Dosage】
Reference usage：yearly consumption of 36 tons for 20T/h cracking furnace.
【Storage & Packaging】
Blue steel drum，net weight 200 Kgs per drum, stored in dedicated cool, dry and
well-ventilated warehouse.
【Precautions】
It is alkaline, please avoid direct contact with skin and wear protective clothes, gloves
and glasses during handling.
21
Chemical Additves: Polymerization inhibitor
Polymerization Inhibitor
【Product Name】
Product name: Polymerization inhibitor
【Quality Index】
In accordance with the Manufacturer’s Standard
Item
Value
Appearance
tangerine liquid
Viscosity (mPa·s,20℃)
1.00 ~ 5.50
Flash point (℃)
≥50
【Application】
It is a new kind of Polymerization inhibitor for the extraction system of butadiene, with the
features of inhibition, antioxidation, metal deactivation and scale dispersion.
【Recommended Dosage】
Reference usage：yearly consumption of 36 tons for 20T/h cracking furnace.
【Storage & Packaging】
25KG square plastic drum or 180kg metal pail
【Precautions】
It is normal chemicals, avoid the fire. If it is contact with skin, pleas wash it with soap.
22
Chemical Additives: 4-ter-Butylcatechol
4-tert-Butylcatechol
【Product Name】
Product Name：4-tert-Butylcatechol
【Molecular and Structural Formula】
Molecular Formula: C10H14O2
Structural formula：
【Quality Index】
Description
Specification
Test Method
Appearance
white or light yellow crystals Visual test with eyes
Manufacturer’s Standard
Purity (Content %)  99%
Melting point °C≥
53
GB617
0.2
GB9741
Ash Content % 
【Application】
This product can be used as a high efficiency polymerization inhibitor, especially applicable to
styrene, butadiene, chlorobutadiene, isoprene, and vinyl chloride monomer. In addition, this product
can be used as antioxidant for many polymers and/or compounds such as PE, PP,
polychlorobutadiene, nylon, synthetic rubber, and oils and their derivants, ethyl cellulose, lubricants
and metal soap etc. This product also can be used as the passivators for carbamate catalyzers, and
used as stabilizer for various organic conpounds.
【Recommended Dosage】
Monomer
Reference
（PPM）
styrene
dosage
Monomer
Reference dosage
（PPM）
1-400
Vinyl chloride
10-500
butadiene
25-200
α-methyl styrene
1-100
vinyltoluene
10-50
acrylonitrile
10-100
divinylbenzene
1000-2000
chlorobutadiene
25-200
C4
10-100
unsaturated polyester resin
50-400
【Storage & Packaging】
The product is packed in cardboard drum, 40kg per barrel. It shall be protected from impact,
fire, direct sunshine and rain during the transportation. The product shall be stored in dry storage
with ventilation. The product shall be away from heat source and kindling.
23
Chemical Additives: Cobalt Acetate
Cobalt Acetate
【Product Name】
Product Name：Cobalt Acetate
【Molecular and Structural Formula】
Molecular Formula: Co(CH3COO)2•4H2O
Molecular Weight:249.08
【Property Features】
Purple crystal, easy to deliquesce, soluble in water, dilute acid. At 140 celcius, lost of 4
molecules crystalline water, specific gravity 1.703.
【Quality Index】
Content of Cobalt acetate
Water insoluble matter
Sulfate (SO42-)
Chloride (Cl-)
Nitrate（NO3- ）
Content of Iron(Fe)
Content of Copper（Cu）
Content of Nickel（Ni）
Alkali metal and alkaline-earth metal
%
%≤
% ≤
% ≤
% ≤
% ≤
% ≤
%≤
% ≤
97 - 99
0.02
0.01
0.002
0.05
0.001
0.001
0.08
0.30
【Application】
It is used as oxidization catalyst for PTA/PET, paint drier, porcelain dyestuff and foam
stabilizer and analyzing reagent, etc.
【Storage & Packaging】
20/25 kgs net weight per drum. To be stored in a well ventilated cool warehouse. Avoid direct
sunlight.
24
Chemical Additives: Manganese Acetate
Manganese Acetate
【Product Name】
Product Name：Manganese Acetate
【Molecular and Structural Formula】
Molecular Formula: Mn(CH3COO)2•4H2O
Molecular Weight：245.10
【Property Features】
Light red crystal, soluble in water and alcohol.
【Quality Index】
Content of Manganese acetate
Water insoluble matter
Sulfate (SO 4 2- )
Chloride (Cl-)
Content of Iron(Fe)
Content of Copper（Cu）
Content of Nickel（Ni）
Alkali metal and alkaline-earth metal
%
% ≤
% ≤
% ≤
% ≤
% ≤
%≤
%≤
97 - 99
0.01
0.02
0.002
0.001
0.001
0.08
0.30
【Application】
It is used as oxidization catalyst for Terephthalic Acid (TPA) and glacial acetic acid, paint drier,
fertilizer, etc.
【Storage & Packaging】
25 kgs net weight per drum. To be stored in a well ventilated cool warehouse. Avoid direct
sunlight.
25
Chemical Additives: Animony Triacetate
Antimony Triacetate
【Product Name】
Product Name：Antimony Triacetate
【Molecular and Structural Formula】
Molecular Formula: Sb(CH3OO)3
Molecular Weight：298.89
【Property Features】
White or gray powder, easy to solve in glycol, toluene and xylene and easy to resolve when
meeting damp..
【Quality Index】
Content of Antimony (Sb)
Chloride (Cl -)
Content of Iron(Fe)
Content of Toluene
Solubility (20 celcius in glycol)
%
% ≤
% ≤
% ≤
40 - 42
0.002
0.002
0.2
Colorless and transparent
【Application】
Catalyst for poly-condensation of polyester.
【Storage & Packaging】
12.5 kgs net weight per drum.
26
Chemical Additives: Animony Tris-ethylene glycol
Antimony Tris-ethylene glycol
【Product Name】
Product Name：Antimony Tris-ethylene glycol
【Molecular and Structural Formula】
Molecular Formula: Sb(C2H4O2)3
Structural formula：423.66
【Property Features】
White crystal, colorless and non-toxic, easy to deliquesce in damp air.
【Quality Index】
Content of Antimony (Sb)
Chloride (Cl - )
Content of Iron (Fe)
Content of Sulfate (SO 42-)
Loss on drying
%
% ≤
% ≤
% ≤
% ≤
56.0-58.5
0.01
0.001
0.01
1.0
【Application】
Catalyst for poly-condensation of polyester.
【Storage & Packaging】
15 kgs net weight per drum.
27
Chemical Additives: Calcium Hypochlorite Granular
Calcium Hypochlorite Granular
【Product Name】
Product Name：Calcium Hypochlorite Granular
CAS Registry Number: 7778-54-3
PIN (UN/NA Number(s)): 1748 2880
【Molecular and Structural Formula】
Molecular Formula: Ca(OCl)2
Structural Formula: O-Cl-Ca-Cl-O
【Property Features】
Physical state: Crystalline granular
Appearance: white
Odor: strong chlorine like
Molecular Weight: 142.9848
Melting Point: Decomposes at temperatures above 100 deg C
Decomposition temperature: 175 deg C
Specific Gravity/Density: 2.0 (water=1)
Solubility in Water: 21.5g/100ml at 0 deg C; 23.4g/100ml at 40 deg C
Solubility in Other Liquids: Not available. Calcium hypochlorite reacts with many organic
materials.
【Quality Index】
Specification
Available chlorine %
Moisture %
Granular(14~50mesh)%
Density g/ml
Insolubility %
CaCO3 %
Ca(OH)2 %
CaCL2 %
NaCL %
CAL-HYPO 65%
65.0min
5.5-10
90min
1.0-1.1
5.0max
3max
2max
2max
14-20
CAL-HYPO 70%
70.0min
5.5-10
93min
1.0-1.1
3.0max
3max
2max
2 max
12-16
【Application】
Water-treatment agent; Bleaching Agent; Bactericide; Algaecide
【Storage & Packaging】
25kg, 40kg, or 50kg net in plastic drums lined with plastic bags.
To keep away from humidity and direct sunlight, it should be properly sealed and stored
under ambient temperature and good ventilation, also it should not be mixed up with organic, acid
and reducing agent.
28
Chemical Additives: Etherification Resin Catalyst
Etherification Resin Catalyst
【Product Name】
Product Name：Etherification Resin Catalyst
【Property Features】
The product has been developed for the production of chemicals including fuel additives,
industrial solvents, such as for MTBE, ETBE and TAME through the action of butylenes
hydration; for high-octane gasoline by methanol and iso-olefin from light gasoline through
etherification reaction; for Tert-butylation phenol by isobutylene and phenol through alkylation
reaction. Its novel catalysis outperforms any others in olefin conversion and catalyst lifetime.
Physical form
Opaque beads
Ionic form as shipped
Hydrogen
Structure
Polystyrene crosslinking with DVB
Functional group
SO3H
Concentration of acid sites [1]
> 5.20 mmol/g
>1.70mmol/ml
Moisture holding capacity [1]
50 to58 % (H+ form)
Shipping weight
750 to 850 g/L
Specific Gravity
1150 to 1250 g/L
Particle Size
Particle size range
(0.355 to 1.250mm)≥99%
Uniformity coefficient
< 1.4
Fine contents
< 0.355 mm : 0.5 % max
Coarse beads
> 1.250 mm : 0.5 % max
Maximum operating temperature
120℃
【Application】
For MTBE by isobutylene in C4 raw material through etherification reaction
content of isobutylene from C4 material
15~45%
reaction pressure
0.5~1.0MPa
methanol to isobutylene(unit: mol)
0.95 to 1.2
Reaction temperature
30~80℃
Airspeed
1~3 h-1
conversion of isobutylene
≥90%
Selectivity
≥99%
For TBA by isobutylene hydration
Content of isobutylene from C4
15~45%
reaction pressure
1.0~2.0MPa
Water to isobutylene (unit: mol)
15~25
Reaction temperature
70~90℃
Airspeed
1~5 h-1
conversion of isobutylene
≥40%
Selectivity
≥99%
For high-octane gasoline through gasoline etherification
content of etherified olefin in gasoline
≥15％
reaction pressure
0.6~0.7MPa
methanol to isobutylene(unit: mol)
0.85～1.0
Reaction temperature
65~75℃
conversion of etherified olefin
≥60％
【Storage & Packaging】
Storage: avoiding water rain at the temperature 5-40 celcius, don’t pack column with dry ion exchange resin. Dry
beads expands when wetted; this expansion can cause glass column to shatter. Packed 25 kg in plastic woven
bags.
29
Chemical Additives: β-Mercaptoethanol
β-Mercaptoethanol
【Product Name】
Product Name：β-Mercaptoethanol
Chemical Name: Ethylene thioglycol; Thioglycol 2-Hydroxyethylmercaptane, MCE
【Molecular and Structural Formula】
Molecular Formula: C2H6OS
Structural Formula: HSCH2CH2OH
【Property Features】
β-Mercaptoethanol is a colorless transparent liquid with a special smell. It is soluble in water, alcohol, aether,
benzene and other organic solvents. It is hygroscopic in air, and not irritant. No cancers could be caused. Boiling
point:158 C (9.9 X 104 pa, Flash point: 75 C, Melting point: -100 C, Density:(20C,g/cm3): 1.1143. Refractive
index: (
) 1.4996, Viscosity:(20 C) 3.43cp
【Quality Index】
Index
Item
Superior Grade
Appearance
First Grade
General
Grade
Colorless liquid, no mechanical impurities
Color(Pt－Co)
50
50
100
Purity(%)
99.2
98.50
98.00
H2O(%)
0.50
PH (50%V/V water solution)
3.0
Emulsion separated time, Sec
60
【Application】
The product can be used as chain extender in manufacturing of low- polymer PVC; As inhibitor
for acrylo nitrile; As transfer agent for polymerization; As intermediate for production of corp
protection agents and dyestuff; As textile auxiliaries and inhibitors for pickling baths.
【Storage & Packaging】
Packing Size: In 200kg or 220kg net plastic drum. Handle and carry with care, protect against
heat and fire. Sealed and stored in cool, dry ventilative warehouse. keep away from Oxides (such as
H2O2, H2SO4,other organic oxides) and sunlight .
30
Chemical Additives：Triethyl Aluminum
Triethyl Aluminum
【Product Name】
Product Name: Triethyl Aluminum (TEAL)
CAS No.: 97-93-8
【Quality Index】
Property
Unit TEAL-Ⅰ
Appearance
Color
Density
25 celcius
Boiling Point (760mmHg)
Melting Point
celcius
Viscosity (cP) (25 celcius)
Vapor Pressure (mmHg) (25 celcius)
Aluminum Content
%
Purity
%
Tri-n-propyl Aluminum
%
Tri-n-Butyl Aluminum
%
Tri-iso-Butyl Aluminum
%
Hydrides as ALH3
%
Liquid
Colorless
0.835
186.6
-52
2.58
0.025
23.0
≥94.0
≤0.7
≤6
≤1.5
≤1.0
TEAL-Ⅱ
Liquid
Colorless
0.835
186.6
-52
2.58
0.025
≥22.8
≥94.0
≤0.7
≤6
≤1.5
≤0.1
【Application】
Co-catalyst for olefin polymerization.
【Storage & Packaging】
Store in accordance with local/national regulations. Keep away from food, drink and animal
feedingstuffs. Keep under dry nitrogen containing less than 10 ppm oxygen. Protect product from
moisture and wet air. Keep container tightly closed and in a well-ventilated place. Packed in
C60/12 tank-type storage tank during transportation.
【Precautions】
Reacts violently with water. Spontaneously flammable in air, Causes burns.
When using do not eat, drink or smoke. Handle in well ventilated areas. Eliminate all sources of ignition,
and do not generate flames or sparks. Take precautionary measures against static discharges. Apply
grounding when transferring from one container to another. Avoid contact with moisture and water. Keep
under nitrogen. Handle only in closed system. During sampling, disconnecting lines or opening connections,
an aluminised suit should be worn. Avoid contact with skin and eyes. Avoid Incompatible materials
31
Chemical Additives：Tetrabromoethane
Tetrabromoethane
【Product Name】
Product Name: Tetrabromoethane, 1,1,2,2-tetrabromoethane
【Molecular Formula】
Molecular Formula: C2H2Br4
Molecular weight: 345.67
【Quality Index】
Appearance
Colorless or light yellow transparent liquid
Saturation （APHA）
Relative density,
≤
-2 — 0
Freezing point,℃
≥
Content ,%
98.5
5.0 — 7.0
PH
Content of inorganic
80
2.955 — 2.970
d2525
halide10-6
≤
15.0
【Application】
Used as catalyst accelerators for the PTA production; used for making quarternary ammonium salt
compounds and burning rate accelerators in the organic synthesis industry; used as activators in the
oxidation procedure for making terylene in the chemical fiber industry; used as inter-media in the coating
industry; used as disinfectors and medicinal inter-media in the pharmaceutical industry; used as solvents
of oils and waxes in the oil production industry; used as separators in the mining industry; used as fire
extinguishing agents in the fire fighting industry; used as chemical reagents in the analytical chemistry;
used as cleaning agents of microscopes and instruments.
【Storage & Packaging】
Net weight 150kg each barrel, the iron barrel lined with a plastic film. Stock in cool and ventilated
places, keep out of moisture and sun. Shelf life: 12 months.
32
Chemical Additives：Hydrobromic Acid
Hydrobromic acid
【Product Name】
Product Name: Hydrobromic Acid
【Molecular Formula】
Molecular Formula: HBr
Molecular weight: 80.91
【Quality Index】
Appearance
Content
Free bromine
ClSO42Iodide
Iron
Heavy Metals
% w/w
PPm w/w
PPm w/w
PPm w/w
PPm w/w
PPm w/w
PPm w/w
Colorless clear liquid
≥47
≤50
≤100
≤100
≤100
≤5
≤10
【Application】
As the catalyst in PTA production; other process where high purity hydrobomic acid is needed.
【Storage & Packaging】
300kg per drum or tanks. To be stored in a well ventilated warehouse. Avoid direct sun light.
33
Chemical Fiber Additives
Chemical Fiber Additives: Titanium Dioxide
Titanium Dioxide - Titania
【Product Name】
Product Name: Titanium Dioxide, Titania
【Molecular Formula】
Molecular Formula： TiO2
【Quality Index】
Typical physical and mechanical properties of titania
Density
4 gcm-3
Porosity
0%
Modulus of Rupture
140MPa
Compressive Strength
680MPa
Poisson’s Ratio
0.27
Fracture Toughness
3.2 Mpa.m-1/2
Shear Modulus
90GPa
Modulus of Elasticity
230GPa
Microhardness (HV0.5)
880
12
Resistivity (25°C)
10 ohm.cm
Resistivity (700°C)
2.5x104 ohm.cm
Dielectric Constant (1MHz)
85
Dissipation factor (1MHz)
5x10-4
Dielectric strength
4 kVmm-1
Thermal expansion (RT-1000°C)
9 x 10-6
Thermal Conductivity (25°C)
11.7 WmK-1
【Application】
Applications for sintered titania are limited by its relatively poor mechanical properties. It does
however find a number of electrical uses in sensors and electrocatalysis. By far its most widely used
application is as a pigment, where it is used in powder form, exploiting its optical properties.
34
Chemical Fiber Additives: Sodium Methyl Sulfonate
Sodium Methyl Sulfonate
【Product Name】
Product Name：Sodium Methyl Sulfonate
【Molecular Formula】
Molecular formula： CH2C(CH3)CH2SO3Na
Molecular weight: 158.156
【Application】
1. As monomer of high efficiency polycarboxylic acids concrete water reducing agents; offer
stable sulfonic acid groups.
2. It is mainly used as the third monomer to improve the dyeability, heat resistance,sense of
touch and easily weaving of the polyacrylonitrile. Also it can be used on water treatment, paint
additive, carbon pore creating and powdered paints.
【Quality Index】
Appearance
white flaky crystal
Melting point
270-280°C
Solubility
It is easily soluble in water,slightly soluble in alcohol and
Water Solution:
Assay
Chlorides
Iron
Sodium sulfite
Moisture
Color
methylsulfoxide,but not soluble in other organic solvent.
transparent
>99.50%
≤0.035%
≤0.4ppm
≤0.02%
≤0.5%
≤10
【Storage & Packaging】
1. Net weight: 20kg/bag 25kg/bag (kraft paper bag lined with PE), 170kg/bag or
500kg/flexible container
2. Avoid rain, dampness and sunlight in transporting.
3. Sttored in dry, cool place.
35
Plastic Additvives
Plastic Additvives：Antioxidant 1010
Antioxidant 1010
【Product Name】
Product Name：Antioxidant 1010
Chemical name: Tetrakis[methylene(3,5-di-t-butyl-4-hydroxyhydrocinnamate)]methane
CAS NO:6683-19-8
【Molecular and structural formula】
Molecular Formula: C73H108O12
【Performance Features】
Highly compatible with a wide range of organic substrates, Non-staining and non-discoloring
Excellent resistance to extraction, Odorless and tasteless, Improvement of long-term stability
Low volatility,Ease of compatibility with other stabilizers
【Quality Index】
Appearance
White Crystal powder or granular
Assay
98 % (MIN)
Melting Point
110~125℃ MIN
Ash Content
0.1% WT MAX
Volatile
0.5% WT MAX
percent transmission of solution
425 NM 97% MIN, 500 NM 98% MIN
【Application】
Antioxidant 1010 finds application in plastics, rubber, latex, varnishes, adhesives, TPR's and
Hot Melts. In plastics, ntioxidant 1010 provides excellent antioxidant performance in
Polyethylene, Polystyrene, Polyacetal, PVC, AS resin, Methacrylic resin, Polycarbonate,
Polyester, and Polymethyl-pentene as well as many others. In rubbers, Antioxidant 1010 can be
used in SBR, EPR, EPDM, Polybutadiene, Neoprene, Nitrile, Polyisoprene, and many other
synthetic rubbers.
【Recommende Dosage】
Typical dosage is 0.02% - 0.50% by weight. The loading data and results are based on
laboratory work (and field testing) under controlled conditions and do not necessarily indicate
the result that the buyer or user will attain. For this reason we strongly recommend testing of
your own system under the actual conditions of processing and end-use prior to full scale testing.
The recommended loading concentrations in polyolefins range between 0.05% and 0.5%
depending on substrate, processing conditions, and long-term stability requirements.
Concentration levels of Antioxidant1010 in hot melt adhesives range from 0.2% to 1%, and in
synthetic tackifier resins, Antioxidant 1010 concentrations range between 0.1% and 0.5%. Exact
loading must be determined by compositions of the specific polymer system.
【Storage & Packaging】
Packing: the net weight is 25Kg. It is packed in Three-in-one compound bags.The inner layer
is plastic film,and the outer is polypropylene braided lining kraft paper bags.
【Precautions】
Keep away from moisture and not to be handled together with toxic materials.
36
Plastic Additvives：Antioxidant 1076
Antioxidant 1076
【Product Name】
Product Name：Antioxidant 1076
Chemical name: Stearyl-3-(3',5'-di-t-butyl-4-hydroxyphenyl) propionate
CAS NO: 2082-79-3
【Molecular and structural formula】
Molecular Formula: C35H62O3
【Quality Index】
Melting Point
50~55℃
Ash Content
0.01 max %
Moisture content
0.2 max %
Volatile Content
0.10% max
Assay
99% min
Appearance
white crystalline granular or powder
Light transmittance (10g/100ml toluene)
425nm 97% min, 500nm 98% min
【Application】
It’s widely applicable to polyethylene,poly propylene, polyoxymethylene, ABS resin,PS resin,
PVC, engineering plastics, rubber and petroleum products for polymerization!
【Storage & Packaging】
Packing: the net weight is 25Kg.It is packed in Three-in-one compound bags.The inner layer is
plastic film,and the outer is polypropylene braided lining kraft paper bags.
【Precautions】
Keep away from moisture and high temperature, not to be handled together with toxic materials.
37
Plastic Additvives：Antioxidant 168
Antioxidant 168
【Product Name】
Product Name：Antioxidant 168
Chemical name: Tris (2,4-di-tert-butylphenyl) phosphite
CAS NO: 31570-04-4
【Molecular and structural formula】
Molecular Formula: C H O P
42
63 3
【Performance Features】
Highly compatible with a wide range of organic substrates, Non-staining and non-discoloring
Excellent resistance to extraction, Odorless and tasteless, Improvement of long-term stability
Low volatility,Ease of compatibility with other stabilizers
【Quality Index】
Appearance
Assay
Melting Point
Ash Content
Volatile
acid number
phosphorus content
percent transmission of solution
2,4-DI-TERT BUTYL PHENOL
White powder
99.0% (MIN)
184.8~186°Cmin
0.15%
0.3% WT MAX
0.5% WT MAX
5% WT MIN
425 NM 98% MIN, 500 NM 99.1% MIN
0.3% WT MAX
【Application】
Antioxidant 168 is sterically hindered phenolic antioxidant, exhibiting its highly effective, non
discoloring and low volatility
character for organic substrates. As a stabilizer, it is recommended and protect organic
substrates against thermo-oxidative degradation.it’s widely used for additives of Rubber or
plastics.
【Storage & Packaging】
Packing: the net weight is 25Kg. It is packed in Three-in-one compound bags.The inner layer
is plastic film, and the outer is polypropylene braided lining kraft paper bags.
【Precautions】
Keep away from moisture and not to be handled together with toxic materials.
38
Plastic Additives: Antioxidant BHT
Antioxidant BHT, 264 , T501
【Product Name】
Product Name：Antioxidant BHT, 264, T501
CAS:128-37-0
【Performance Features】
Antioxidant BHT(2,6-di-tert-butyl-4-methyl phenol), C15H24O, molecular weight 220.36,
white crystals or crystalline powder; soluble in benzene, toluene, ethanol, acetone, carbon
terachloride,and methanol;insoluble in water and 10% NaOH solution.Mainly used in animal and
vegetable oil and fat, and oil-rich food,and for packaging materials for cosmetics and food.
【Quality Index】
Items
Parameter
Appearance
white crystals or crystalline powder
m.p.℃
69.0-70.0
Water content, % ≤
0.1
Incandesced residue ,% ≤
0.01
Sulfate (as SO4), % ≤
0.002
Heavy metal (as Pb), % ≤
0.0004
As
,% ≤
0.0001
Free cresol(as p-cresol) ,% ≤
0.02
Grades: Food grade, technical grade and feed grade.
【Storage & Packaging】
kraft paper outside, plastic woven bag with plastic lining inner, with a net weight of 25kg, or
load by 500kg plastic woven bag.
【Precautions】
Keep away from moisture and not to be handled together with toxic materials.
39
Plastic Additives: Calcium Stearate
Heavy Tar Stearic Acid Calcareous
【Product Name】
Product Name: Heavy tar stearic acid calcareous
Chemistry name：Calcium Stearate
【Molecular and structural formula】
Molecular Formula: C36H70O4Ca
Structural Formula:
【Performance Features】
The heavy granular products of CaSt is superior to the conventional powdered products with
three remakable advantages: 1st. the lower dust pollution and therefore more in favour of
enviormental protection, 2nd，the enhanced liquidity,3rd. the higher purity.
【Quality Index】
Factory Project
Units
Quality Index
Size 2.2mm white or light yellow
Appearance
Visual
crystalline particles
Ca Content
%
7.0±0.5
Free acid （ With stearic acid
≤1.0
%
Meter）
Heat Loss
%
≤2
Melting
℃
150-160
3
BulkDensity
g/cm
0.6±0.1
Ash
%
9.0-10.5
【Application】
Used as the acids neutalizer in polyolefine and halogen obsorber in resin. Used as lubricant in
the forming and extrusing molding process when added to the polyolefine, polyoacyl styrenics and
rubber. Used as molding discharging agent when added to the the thermoplastic plastics, rubber and
the thermosetting products. Also used as water proofing additive in water proof materials and
flatting agent in oil paint.
【Recommended Dosage】
In polyolefine amount used 350ppm-1500ppm
【Storage & Packaging】
Store in cool, dry and well ventilated storehouse. Pay attention to moisture-proof. No stress
and handle with care. 25kg(net weight) in paper-plastic laminated box or triple kraft paper packing
bag.
【Precautions】
Use process enclosures and local exhaust ventilation to keep airborne levels below recommended exposure
limits. A self cotained breathing appatatus shoud be used for operators to avoid inhalation and splash goggles to
protect eyes. After contact with shin, wash immediatly with plenty of water. Use water spray, appropriate foam,
carbon dioxide, dry chemical powder or sandy soil as extinguishing media when ignited. Intact package shoud be
guaranteed when dipatched and should be kept in the whole tansportation. Packed or transported with oxidants is
prohibited. Don’t exposed to the hot sun or the rain.
40
Plastic Additives: Zinc Stearate
Zinc Stearate
【Product name】
Product Name: Zinc stearat
【Molecular and structural formula】
Molecular Formula: C36H70O4Zn
【Performance Features】
The heavy granular products of ZnSt is superior to the conventional light powdered products
with three remakable advantages: 1st. the lower dust pollution and therefore more in favour of
enviormental protection, 2nd. the enhanced liquidity, 3ed. the higher purity.
【Quality Index】
Factory Project
Units
Quality Index
Appearance
Size 2.2mm white granules, powder
Visual
Zn Content
%
10.4-11.4
Free acid（With stearic
≤1.0
%
acid Meter）
Heat Loss
%
≤0.5
Melting
℃
118-128
3
BulkDensity
g/cm
0.6±0.1
【Application】
The product is widely used as lubricant and separant in rubber product. Used as stablizer,
lubricant, molding discharging agent and color medicianl powder n plastic processing, also used as
flatting agent in oil paint.
【Recommended Dosage】
Mix this product with raw plastic by the proportion of 0.035-0.150 before the normal
processing.
【Storage & Packaging】
Store in cool, dry and well ventilated storehouse. Pay attention to moisture-proof. No stress
and handle with care. 25kg(net weight) in paper-plastic laminated box or triple kraft paper packing
bag.
【Precautions】
Use process enclosures and local exhaust ventilation to keep airborne levels below
recommended exposure limits. A self cotained breathing appatatus shoud be used for operators to
avoid inhalation and splash goggles to protect eyes. After contact with shin, wash immediatly with
plenty of water. Use water spray, appropriate foam, carbon dioxide, dry chemical powder or sandy
soil as extinguishing media when ignited. Intact package shoud be guaranteed when dipatched and
should be kept in the whole tansportation. Packed or transported with oxidants is prohibited. Don’t
exposed to the hot sun or the rain.
41
Plastic Additives: Hydrated Magnesium Silicate
Hydrated Magnesium Silicate
【Product Name】
Product Name: hydrated magnesium silicate
【Performance Features】
Hydrated magnesium silicate atablilizer, also known as TA is a white flaky crystals of
phosphorus, which is a high-plastic rheology additives openings. Hydrated magnesium silicate used
as a polyethylene film major openings agent, agent. PP nucleating agent and is widely used in
plastic industry. Its good dispersion can be a certain degree of miscibility resin, the resin added in a
certain amount of hydrated magnesium silicate additives openings, and its resin did not affect the
physical properties, easy processing and molding resin. Opening it as agent,agent, nucleating agent
widely used in the plastics industry, in order to enhance the rigidity of plastic to improve its, the
opening of. Hydrated magnesium silicate or the paint, ink production, the best fillers, it has not
precipitated, non-degenerate, characterized by uniform light, which in the paint, ink production line
is also a wide range of applications.
Hydrated magnesium silicate produced by HSM-1 products, stable quality, excellent quality, to
replace imported products are widely used in the Qilu, Yanshan, Daqing, Guangzhou and other
major petrochemical ethylene plant, by users.
HSM-hydrated magnesium silicate product physical and chemical properties of indicators:
【Quality Index】
SiO2 content(wt%)
58-61
MgO content(wt%)
29-32
firing agravity(wt%)
5-6.5
granularity
400-2500eye mesh
whiteness ≥
88
【Storage & Packaging】
Product Package: net weight of 20 ± 0.02Kg / bag, kraft paper bag lined with PE plastic bag.
42
Plastic Additives: Glyceryl Monostearate
Glyceryl Monostearate
【Product Name】
Product name：Glyceryl Monostearate
【Molecular and structural formula】
Molecular formula：C21H42O4
【Quality Index】
Item
Appearance
Α-GMS content
Melting point
acidity
Iodine value
ash
Ester value
Iron content
Unit
By eyes
%
℃
mgKOH/g
gl2/100g
%
mgKOH/g
mg/kg
Standard
GMS-40LA
≥40
56-60
≤3.0
≤2.0
≤0.15
158-176
≤15
GMS-45/3
GMS-60/3
White waxy solid
≥45
≥60
56-61
60-66
≤3.0
≤3.0
≤2.0
≤2.0
≤0.10
≤0.10
160-175
160-172
≤10
≤10
GMS-90A
≥90
66-70
≤3.0
≤2.0
≤0.10
160-172
≤10
【Application】
Widely used in the field of pelletizing and processing of polyolefin products.
【Recommended Dosage】
Reference dosage：400-1500 ppm
【Storage & Packaging】
Stored in cool, well ventilated dry warehouse. Avoid moisture or pile up under heavy weight.
Handle with care. Packaged in cartons lined with plastic bags or in kraft bags, net weight 25kg each.
【Precautions】
Keep away from water, moisture and direct sunlight. Transportation should be done in early
morning or late evening so as to avoid strong sunlight which may result in hardening of the
product..
43
Plastic Additives: Erucamide
Erucamide
【Product Name】
Trade name：Erucamide
Chemical Name：Cis-22 Carbon-acid amide
【Molecular and structural formula】
Molecular formula：C21H41CONH2
Structural formula：CH3(CH2)7CH=CH(CH2)11C=O-NH2
【Performance Features】
For the waxy solid, insoluble in water, In ketones, esters, alcohols, ether, benzene and other
organic solvents have a certain solubility, Good compatibility with the resin, which has good
mobility; with high melting point and good thermal stability. Is a non-toxic (FDA argument) No
corrosion, multi-effect plastic printing ink, paint, paint, textile, paper, cosmetics and other chemical
additives.
【Quality Index】
Item
Standard
Appearance
Powder or small granules
Amide Content %
98min
Acid Value mgKOH/g
0.3max
Iodine Value gI2/100g
72—78
Melting Point ℃
79—86
Gardner Hazen
2max
Water %
0.1max
【Application】
BOPP, CPP, LLDPE and other films’s best opening and anti-adhesion agent; Photographic
light-sensitive material (coating) of the lubricant; Cigarette membrane lubricant; Table India
(Composite) ink anti-sticking, anti-stick and Smoothness agent; Toner, paste lubricant and
dispersing agent; Functional additive masterbatch essential for good; coatings and paint flow calm
Run Shuang agent; And melting point of wax modified the regulation of agents, engineering plastics
processing auxiliaries, textile softeners, lubricating oil additives, thermoplastic dip powder
Smoothness, leveling agent.
【Recommended Dosage】
Reference dosage：1%—2%
【Storage & Packaging】
Products with compound bag, bag net weight 25kg, inappropriate storage and transportation of
pollutants and toxic Yi, should be stored in a cool dry and ventilated place, storage period of six
months.
44
Plastic Additives: Oleamide
Oleamide
【Product Name】
Product Name：Oleamide
Chemical Name：9-Octadecenamide
【Molecular and structural Formula】
Molecular formula：C18H35NO
Structure type：CH3(CH2)7CH=CH(CH2)7C=O-NH2
【Performance Features】
No smell of waxy solids, molecules containing an unsaturated Jian (double-jian). Do not
dissolve in water, ketones, esters, alcohols, ether, benzene and other organic solvents have a certain
solubility, good compatibility with the resin. To heat, oxygen, UV stable, with a typical polar and
non-polar molecular structure, can form a monolayer of material interface, with the opening of
anti-adhesion, smooth, increase slip, leveling, waterproof, moisture, anti-settling, anti-pollution,
anti-static, dispersion effects. It is a non-toxic (FDA argument) No corrosion, excellent performance
of non-ionic surfactant.
【Quality Index】
Item
Standard
Appearance
Powder or small granules
Amide Content %
98min
Acid Value mgKOH/g
1.0max
Iodine Value gI2/100g
70—90
Melting Point ℃
70—78
Gardner Hazen
4max
Water %
0.1max
【Application】
This product is mainly used for LDPE film and its composite films, multi-layer co-extruded
films, thin film, cast film, as well as the PP films smooth agent and opening agent; EVA, POM, PC,
PET, PBT, PA and other plastic lubricants and de-film; PU surface treatment agent and fiber
Masterbatch smoothness agent; Plastic ink and dip powder thermoplastic binder and leveling of
anti-agents, smoothness agents; Toner, color paste, color masterbatch lubricant and dispersing agent;
Functionality (opening and smoothness agent) Masterbatch essential for good additive; Also serves
as a metal protection additives and polyolefin sheet of lubricant.
【Recommended Dosage】
Reference dosage：1%—2%
【Storage & Packaging】
Products with compound bag, bag net weight 25kg, inappropriate storage and transportation of
pollutants and toxic Yi, should be stored in a cool dry and ventilated place, storage period of six
months.
45
Ion Exchange Resins
Gel and Macroporous Strong Base Anion Exchange Resins
Total
Water
Shipping Specific Reversible
Ionic Exchange
Retention Weight Density Swelling Color
Form Capacity
(g/ml)
(g/ml)
Max.
Min.(meq/ml) (%)
Remarks
Gel-type Polystyrene Strong Base Anion Exchange Resins
201×2
Cl
≥0.75
72~80
0.65~0.70 1.01~1.07 Cl→OH
40%
201×4
Cl
≥1.25
50~56
0.65~0.72
Cl→OH
1.03~1.09 33%
201×4FC Cl
≥1.20
50~56
0.63~0.72
201×7
≥1.35
42~48
0.67~0.73 1.06~1.10
201×7OH OH
≥1.15
53~58
0.66~0.71 1.05~1.09
201×7FC Cl
≥1.35
42~48
0.67~0.73
201×7SC Cl
≥1.30
42~48
0.66~0.71 1.06~1.10
201×7MB Cl
≥1.35
42~48
0.67~0.73
202-II
Cl
≥1.30
45~51
0.67~0.73 1.08~1.15
202-IISC Cl
≥1.30
45~51
0.67~0.73 1.08~1.15
74
Cl
Cl
With excellent kinetic
properties. Mainly used in
antibiotic extraction and
organic acid adsorption.
International gel
type
standard. With good kinetic
properties
and
high
working capacity. For
demineralization and silica
removal. Widely used in
Pharmaceutical and Food
industries.
Cl→OH
27%
Colorless
To Light Domestic
gel
type
Yellow
standard.
With
high
capacity
and
good
mechanical strength. FC
for floating bed and SC for
double-layer bed. The
correspondent
OH-type
resins are also available.
Type II gel anion resin.
Very
high
working
capacity
for
demineralization.
Remove Fe Ion in ≥30%
HCl
Cl→OH
25%
0.66-0.73 1.04-1.10
Macroporous-type Polystyrene Strong Base Anion Exchange Resins
≥1.15
53~58
0.65~0.73 1.03~1.10
D201OH OH
≥0.95
58~65
0.63~0.70 1.02~1.09
D201FC
Cl
≥1.15
53~58
0.65~0.73 1.03~1.10
D201MB Cl
≥1.15
53~58
0.65~0.73 1.03~1.10
D202-II
Cl
≥1.20
50~57
0.68~0.73 1.08~1.15
D202-IIFC Cl
≥1.20
50~57
0.68~0.73 1.08~1.15 Cl→OH
15%
D202-IIO OH
H
≥1.00
55~63
0.65~0.70 1.03~1.12
D296
Cl
≥1.10
50~60
0.65~0.75 1.05~1.10 Cl→OH
20%
Excellent resistance to
physical breakage and
osmotic shock fracture.
Good
silica
removal
ability.
Mainly
used
in
Milky
demineralization.
WhiteTo
Light
Yellow
Macroporous type II anion
resins. Excellent resistance
to
physical
breakage,
osmotic shock fractures.
Very
high
working
capacity in deionization.
High resistance to organic
Light
fouling. Mainly used as
Yellow
organic scavenger.
DOC2001 Cl
≥0.80
55~65
0.63~0.73 1.03~1.08 Cl→OH
20%
Same as D296. Suitable for
food processing.
78~85
0.60~0.70 1.04~1.08 Cl→OH
15%
D201
D208
Cl
Cl
≥0.55
Cl→OH
20%
Milky
White
Mainly used in separation
and
purification
of
Heparin.
46
Ion Exchange Resins
Total
Exchange Water
Shipping
Ionic
Capacity Retention Weight
Form
Min.
(%)
(g/ml)
(meq/ml)
Specific Reversible
Density Swelling Color Remarks
(g/ml)
Max.
Gel-type Polystyrene Strong Cation Exchange Resins
≥1.40
52~58
0.75~0.80 1.18~1.25
001×4H H
≥1.25
58~65
0.72~0.78 1.10~1.20
001×7
≥1.90
45~50
0.78~0.85 1.25~1.29
001×7H H
≥1.80
51~56
0.73~0.80 1.17~1.25
001×7FC Na
≥1.90
45~50
Na→H
0.78~0.85 1.25~1.29 8~10%
001×7MB Na
≥1.90
45~50
0.78~0.83 1.25~1.29
001×8
Na
≥2.0
43~48
0.78~0.88 1.26~1.30
001×8FC Na
≥2.0
43~48
0.78~0.88 1.26~1.30 Na→H
5~8%
001×8MB Na
≥2.0
43~48
0.78~0.88 1.26~1.30
001×10
≥2.2
37~42
0.80~0.88 1.28~1.32
001×10H H
≥2.0
43~59
0.78~0.83 1.22~1.28
001×16
Na
≥2.4
28~36
0.83~0.89 1.30~1.35
66
Na
≥1.5
35~45
0.78~0.88 1.15~1.25
68
Na
≥1.9
45~50
0.78~0.88 1.25~1.29 Na→H
10%
607
H
≥1.75
51-56
0.70-0.80
001×4
Na
Na
Na
Na→H
10%
Mainly used in water softening,
demineralization and antibiotic
extraction
Domestic gel type standard.
Suitable for softening and
demineralization.
Na→H
3~5%
1.17-1.22
For floating bed with high flow
rate
With
good
mixture
and
separation properties with anion
resins in mixed bed
Golden International gel type standard.
Suitable for softening and
to
Brown demineralization. Used also in
amino acids and antibiotics.
For
water
treatment
Biochemical extraction.
and
Mainly used in antibiotic
extraction
Partially sulphonated resin for
softening. Significant saving in
salt usage.
Non-solvent cation resin. Very
low contamination. Especially
suitable for drinking water
treatment.
Yellow Particle Size(0.5-1.0mm)
Macroporous-type Polystyrene Strong Cation exchange resins
Na
H
≥1.8
≥1.7
45~50
50~55
D001FC Na
D001MB Na
≥1.8
≥1.8
45~50
45~50
0.78~0.85 1.25~1.28
0.75~0.80 1.16~1.24 Na→H
0.78~0.85 1.25~1.28 5~8%
0.78~0.85 1.25~1.28
D-61 Na
1.80
45~55
0.75~0.85 1.25~1.28
D-65 H
≥2.0
45~55
0.75~0.85 1.18~1.26
D-67 Na
≥2.4
30~40
0.80~0.90 1.30~1.40 Na→H
10%
D001
D001H
Very high resistance to oxidation,
physical breakage, osmotic shock
fracture and organic fouling.
Suitable for water and chemical
Amber treatment.
to
superior
mechanical
Light With
strength
and
excellent
Brown to organic fouling, resistance
D-61,
combined with D-92, is used in
the recycling water treatment in
glycol and methyl ethyl ketone
production.
Very high capacity. Mainly used
Light to convert Vc-Na into VC.
Brown D-67 has higher capacity than
D-65.
47
Water treatment chemicals
water treatment chemicals: Poly Aluminum Chloride
Polyaluminum Chloride
【Product Name】
Product Name: Polyaluminum Chloride
【Molecular and Structural Formula】
Molecular Formula: [AI2(OH)nCL6-n]m, in which n≤6 and m≤10
【Performance Features】
Water treatment cost is 20%-80% lower than that of other inorganic flocculants. It can cause
quick formation of flocs, big flocs and rapid precipitation. It has a wide-rang adaptability for
raw waters with different temperatures and a good solubility. The liquid product is suitable for
automatic dosing, it is slightly corrosive, and convenient for operation. Furthermore, it will not
block pipes over long-time usage.
【Quality Index】
Specifications:(GB15892-2003)
Indices
Name Of Index
Ⅰ
Ⅱ
Liquid
Solid
Liquid
Solid
Excellent Class1
Excellent class1
AI2O3 % ≥
10.0
10.0
30.0
28.0
10.0
27.0
Basicity
40～85
40～85
40～90
40～90
40～90
40～90
Relative Density (20℃)≥ 1.15
1.15
--1.15
-Insoluble substance %≤
0.1
0.3
0.3
1.0
0.5
1.5
PH ( 1% water solution)
3.5～5.0
3.5～5.0 3.5～5.0 3.5～5.0
3.5～5.0 3.5～5.0
Ammonia Nitrogen (N) %≤ 0.01
0.01
Arsenic (As) %≤
0.0001
0.0002
Lead (Pb) %≤
0.0005
0.001
--Cadmium (Cd) %≤
0.0001
0.0002
Mercury (Hg) % ≤
0.00001
0.00001
+6 Chromium (Cr6+) %≤ 0.0005
0.0005
【Recommended Dosage】
1．The liquid product can be dosed directly or dosed after dilution. As for the solid product,
dilution is necessary before being dosed. Normally, dilution proportion for the solid product is
2%-30%,and for the liquid product,5%-50%(based on weight percentage).
2. The specific dosage is based on the flocculation tests and on the trials by the users. As a rule,
the dosage of the liquid product is 2-40gram/ton,and of the solid product,1-20gram/ton.
【Precautions】
The product cannot be stored with other chemicals. We provide special tanks for transportation
to the users .The solid product is packed in inner plastic bags and further in polypropylene woven
bags , with each bag containing 25kg. The liquid product can be stored for one year and the solid
product for two years.The product should be stored in a dry and ventilated place, but the effect will
not be affected even if it gets wet.
48
Lubricant Additives
Lubricant Additives: T151
T151, Mono-Succinimide
【Product Name】
Product Name: T151, Mono-Succinimide
【Quality Index】
Item
Specification
Test Method
Appearance
Reddish brown
transparent viscous
liquid
By eyes
Kin. Viscosity at 100 ℃ ,
mm2/s
≥220
N content, wt%
≥2.0
Colour, lines
≤3.0
Flash Point(open),℃
≥180
Turbidity JTU
≤60
T.B.N., mgKOH/g
45~60
Water, wt%
≤0.08
Mechanical impurities,%
≤0.08
GB/T265
ASTMD-445
SH/T0224
ASTMD-3228
GB/T6540
GB/T6540
GB/T3536
ASTMD-92
SH/T0028
LGA-JIU-1
SH/T0251
ASTMD-2896
GB/T260
ASTMD-95
GB/T511
DIN51592
【Application】
Used together with detergent additives, oxidation and corrosion inhibitors to produce high
grade gasoline engine oil. It is also one of the major raw materials of fuel oil additives.
【Recommended Dosage】
For oils the reference additive levels should be in range of 1.5~4.0%
【Storage & Packaging】
The max temperature should be under 65℃ for storage,loading。If for long storage, we advise
the temperature is less than 50℃, Avoid water . Packing : 200liter iron drum ,NW: 170 kgs / barrel..
Quality guarantee: 24 Months
49
Lubricant Additives: T161
T161, High Molecular Weight Succinimide Ashless Dispersant
【Product Name】
Product Name: T161，High Molecular Weight Succinimide Ashless Dispersant
【Quality Index】
Item
Specification
Test Method
Appearance
Reddish brown
transparent viscous
liquid
By eyes
Kin. Viscosity at 100℃, mm2/s
T.B.N., mgKOH/g
N content, wt%
300~500
15~30
1.0~1.1
Colour, lines
≤3.5
Flash Point(open),℃
≥180
Water, wt%
≤0.08
Mechanical impurities,%
≤0.08
GB/T265
ASTMD-445
SH/T0251
ASTMD-2896
SH/T0224
ASTMD-3228
GB/T6540
GB/T6540
GB/T3536
ASTMD-92
GB/T260
ASTMD-95
GB/T511
DIN51592
【Application】
Widely used in medium and high grade gasoline and diesel engine oils.
【Recommended Dosage】
For oils the reference additive levels should be in range of 1~5%
【Storage & Packaging】
The max temperature should be under 65℃ for storage, loading. If for long storage, we advise
the temperature is less than 50℃, Avoid water . Packing : 200liter iron drum ,NW: 170 kgs / barrel .
Quality guarantee: 24 Months
50
Lubricant Additives: T101
T101 Lowbased petroleum calcium sulfonate
【Product Name】
Product Name:
T101 Lowbased petroleum calcium sulfonate
【Quality Index】
Item
Kin. Viscosity at 100℃, mm2/s
Ca content，%
Density at 20℃, g/cm3
Flash Point(open),℃
Turbidity JTU
T.B.N., mgKOH/g
Water, wt%
Mechanical impurities,%
Specification
report
2.0～3.0
0.90～1.00
≥180
report
20~30
≤0.08
≤0.08
Test Method
GB/T265
ASTMD-445
SH/T0297
ASTMD-4628
GB/T2540
ASTMD-1298
GB/T3536
ASTMD-92
SH/T0028
LGA-JIU-1
SH/T0251
ASTMD-2896
GB/T260
ASTMD-95
GB/T511
DIN51592
【Application】
Used for the production of marine lubricants, automobile lubricants and rust preventing oil.
【Recommended Dosage】
For oils the reference additive levels should be in range of 1.0~3.0%
【Storage & Packaging】
The max temperature should be under 65℃ for storage,loading。If for long storage, we advise the
temperature is less than 50℃, Avoid water . Packing : 200liter iron drum ,NW: 185kgs / barrel . Quality guarantee:
24 Months
51
Lubricant Additives: T106
T106 High Base Synthetic Calcium Sulfonate
【Product Name】
Product Name: T106 High Base Synthetic Calcium Sulfonate
【Quality Index】
Item
Specification
Test Method
Appearance
Reddish brown
transparent viscous
liquid
By eyes
Kin. Viscosity at 100℃,
mm2/s
≤200
Ca content，%
≥11.5
Density at 20℃, g/cm3
Flash Point(open),℃
Turbidity JTU
T.B.N., mgKOH/g
1.10～1.20
≥170
≤250
≥300
GB/T265
ASTMD-445
SH/T0297
ASTMD-4628
GB/T2540
ASTMD-1298
GB/T3536
ASTMD-92
SH/T0028
LGA-JIU-1
SH/T0251
ASTMD-2896
【Application】
It is mainly used in high-grade internal-combustion engine oil and lubricating oils for heavy
load diesel engines, especially for generators using high sulphur fuel.
【Recommended Dosage】
For oils the reference additive levels should be in range of 1.5~3.0%
【Storage & Packaging】
The max temperature should be under 65℃ for storage,loading。If for long storage, we advise
the temperature is less than 50℃, Avoid water . Packing : 200liter iron drum ,NW: 200 kgs / barrel .
Quality guarantee: 24 Months
52
Lubricant Addtives: T803B
T803B, poly-α-Olefine
【Product Name】
Product Name: T803B，poly-α-Olefine
【Quality Index】
Item
Appearance
Flash Point(open),℃
Effective Components，m%
Specification
Test Method
Orange liquid
Visualization
≥135
GB/T3536
ASTMD-92
≥35
Kin. Viscosity at 100℃,
mm2/s
≤1500
Ash content，%
≤0.1
Difference in p.p,℃
≥18
Mechanical impurities, %
≤0.06
RIPP-0034
GB/T265
ASTMD-445
GB/T508
ASTMD-482
GB/T510
ASTM D-97
GB/T511
DIN51592
【Application】
Used in internal combustion engine oil, hydraulic oil, automotive oil and other lubricants with
base oil of differenct paraffin wax content and Viscosity.
【Recommended Dosage】
For oils the reference additive levels should be in range of 0.1~1.0%, Normally, not greater
than 1%
【Storage & Packaging】
The max temperature should be under 65℃ for storage,loading。If for long storage, we advise
the temperature is less than 50℃, Avoid water . Packing : 200liter iron drum ,NW: 165 kgs / barrel .
Quality guarantee: 24 Months
53
Lubricant Additives:
S206
S206, Calcium Sulphurized Ackgl phenate
【Product Name】
Product Name: S206，Calcium Sulphurized Ackgl phenate
【Quality Index】
Item
Specification
Kin. Viscosity at 100℃,
mm2/s
≤300
T.B.N., mgKOH/g
Flash Point(open),℃
Mechanical impurities,%
Water, wt%
Ca content，wt%
S content, wt%
≥245
≥170
≤0.1
≤0.1
≥9.0
2.9～3.8
Test Method
GB/T265
ASTMD-445
SH/T0251
ASTMD-2896
GB/T267
ASTMD-92
GB/T511
DIN51592
SH/T260
ASTMD-95
SH/T0297
ASTMD-4628
SH/T0303
IP-242
【Application】
S206 is mainly used in high-grade internal-combustion oil and marine oil of CC,CD grade and
higher.
【Recommended Dosage】
For oils the reference additive levels should be in range of 1.0~3.5%
【Storage & Packaging】
The max temperature should be under 65℃ for storage,loading。If for long storage, we advise
the temperature is less than 50℃, Avoid water . Packing : 200liter iron drum ,NW: 200 kgs / barrel .
Quality guarantee: 24 Months
54
Lubricant Additives: T202
T202, Zinc Di-Alky Dithio phosphate
【Product Name】
Product Name: T202，Zinc Di-Alky Dithio phosphate
【Quality Index】
Item
Specification
Appearance
density（20℃）g/ cm3
Clear Light yellow to
amber Liquid
Test Method
By eyes
Colour, lines
≤2.0
Flash Point(open),℃
≥180
Water, wt%
≤0.03
Mechanical impurities,%
≤0.07
decomposition temperature ℃
≥220
GB/T2540
ASTMD-1298
GB/T265
ASTMD-445
SH/T0303
ASTMD-5815
SH/T0296
ASTMD-4927
SH/T0226
ASTMD-5815
GB/T6540
GB/T6540
GB/T3536
ASTMD-92
GB/T260
ASTMD-95
GB/T511
DIN51592
SH/T0561
Bush weightlessness， mg
≤25
SH/T0264
Kin. Viscosity at 100℃, mm2/s
S content, wt%
P content, wt%
Zn content, wt%
1.08~1.13
report
14.0~18.0
7.2~8.5
8.5~10.0
【Application】
It can be used in industrial products such as internal-combustion engine oil and gear oil
individually,or with kinds of additives such as detergent dispersant and anti-wear agent.
【Recommended Dosage】
For oils the reference additive levels should be in range of 0.5~3.0%
【Storage & Packaging】
The max temperature should be under 65℃ for storage,loading。If for long storage, we advise
the temperature is less than 50℃, Avoid water . Packing : 200liter iron drum ,NW: 200 kgs / barrel .
Quality guarantee: 24 Months
55
Lubricant Additives: T203
T203, Zinc Di-I-octyl Dithio phosphate
【Product Name】
Product Name: T203，Zinc Di-I-octyl Dithio phosphate
【Quality Index】
Item
Specification
Test Method
Appearance
Clear Light yellow to
amber Liquid
By eyes
1.06~1.15
GB/T2540
ASTMD-1298
report
GB/T265
ASTMD-445
S content, wt%
14.0~18.0
SH/T0303
ASTMD-5815
P content, wt%
7.5~8.8
SH/T0296
ASTMD-4927
Zn content, wt%
9.0~10.5
SH/T0226
ASTMD-5815
Colour, lines
≤2.0
GB/T6540
GB/T6540
Flash Point(open),℃
≥180
GB/T3536
ASTMD-92
Water, wt%
≤0.03
GB/T260
ASTMD-95
Mechanical impurities,%
≤0.07
GB/T511
DIN51592
decomposition temperature ℃
≥230
SH/T0561
Bush weightlessness， mg
≤25
SH/T0264
density（20℃）g/ cm3
Kin. Viscosity at 100℃, mm2/s
【Application】
Used for medium and high grade diesel engine oil.
【Recommended Dosage】
For oils the reference additive levels should be in range of 0.5~3.0%
【Storage & Packaging】
The max temperature should be under 65℃ for storage,loading。If for long storage, we advise the
temperature is less than 50℃, Avoid water. Packing : 200liter iron drum ,NW: 200 kgs / barrel . Quality guarantee:
56
24 Months
57
Lubricant Additives: T551
Benzene Ramification, Metal Deactivator T551
【Product Name】
Product Name: Benzene Ramification, Metal Deactivator T551
【Quality Index】
Item
Appearance
Colorimetric No.
Density（20℃），kg/m3
Motion Viscosity
Flashing Point (Aperture) ℃
Base Number
Oxidization Test (Increment) (min)
Dissolvability %
Thermal Resolution Degree℃
Quality Index
Brown transparent
liquid
Actual
measurement
910-1040
10-14
≥130
210-230
≥90
Acceptable
Report
Testing Method
Eye measurement
GB/T6540
GB/T2540
GB/T265
GB/T3536
Eye measurement
【Application】
It can form the inert protective foil on the metal surface or generate chelate complex to reject
catalysis, especially combined with anti-oxygen additives. This product is generally used in
machine oil, shaft-bearing oil, industrial gear oil, transformer oil and recycling oil, etc. With
good thermal stability, T551 is a high performance multi-effective additive.
【Recommended Dosage】
Common Dosage should be in range of 0.01-0.05%.
【Storage & Packaging】
25/200kg net weight in Iron Drums. Shelf life: 1 year.
58
Lubricant Additives: T746
T746, Dodecylene Maleic Acid
【Product Name】
Product Name: T746，Dodecylene Maleic Acid
【Quality Index】
Item
Specification
Test Method
Appearance
Transparent Sticky Liquid
By eyes
report
GB/T2540
ASTM D - 1298
report
GB/T265
ASTMD-445
Flash Point(open),℃
≥100
GB/T3536
ASTMD-92
PH Value
≥4.3
GB/T264
≤1.0
GB/T5096
ASTM D - 130
density（20℃）g/ cm3
Kin. Viscosity at 100℃, mm2/s
Copper
test(100℃,3h)grade
Corrosion
Liquid phase rust test:
Synthetic Sea Water
Distilled Water
Rust-free
GB/T11143
ASTM D - 665
Test for film tenacity
【Application】
Anti-rust agent for hydraulic oil, steam turbine oil and industrial lubricating oil.
【Recommended Dosage】
For oils the reference additive levels should be in range of 0.03~ 1%
【Storage & Packaging】
The max temperature should be under 65℃ for storage,loading。If for long storage, we advise the
temperature is less than 50℃, Avoid water . Packing : 20liter iron drum ,NW: 20 kgs / barrel .
Quality guarantee: 24 Months
59
Lubricant Additives: T152
T152, Bis-Succinimide
【Product Name】
Product Name: T152，Bis-Succinimide
【Quality Index】
Item
Specification
Test Method
Appearance
Reddish brown
transparent viscous liquid
By eyes
Kin. Viscosity at 100 ℃ ,
mm2/s
≤220
GB/T265
ASTMD-445
SH/T0224
ASTMD-3228
GB/T6540
GB/T6540
GB/T3536
ASTMD-92
RIPP
N content, wt%
1.15~1.35
Colour, lines
≤4.0
Flash Point(open),℃
≥180
SDT
≥55
T.B.N., mgKOH/g
15~30
Water, wt%
≤0.08
Mechanical impurities,%
≤0.08
SH/T0251
ASTMD-2896
GB/T260
ASTMD-95
GB/T511
DIN51592
【Application】
It can be used together with detergent, anti-oxidant and anti-corrosion agent. It can also be
used in quenching oil and fuel.
【Recommended Dosage】
For oils the reference additive levels should be in range of 1.5~4.0%
【Storage & Packaging】
The max temperature should be under 65℃ for storage,loading。If for long storage, we advise
the temperature is less than 50℃, Avoid water . Packing : 200liter iron drum ,NW: 170kgs / barrel .
Quality guarantee: 24 Months
60
Lubricant Additives: T801
T801, Alkyl Naphthalene
【Product Name】
Product Name: T801，Alkyl Naphthalene
【Quality Index】
Item
Specification
Test Method
Flash Point(open),℃
≥180
GB/T3536
ASTMD-92
Chlorine content, %
≤2.0
IP - 224
≤4.0
GB/T6540
GB/T6540
Kin. Viscosity at 100℃, mm2/s
≥100
GB/T265
ASTMD-445
Ash content，%
≤0.1
GB/T508
ASTMD-482
≤0.03
GB/T260
ASTMD-95
≥40
RIPP-0034
≥13
GB/T510
ASTM D-97
Colour, lines
Water, wt%
Effective Components，m%
Difference in p.p,℃
【Application】
Widely used in lube oil with paraffin wax content, or used as dewaxing aid.
【Recommended Dosage】
For oils the reference additive levels should be in range of 0.1~1.0%, Normally, not greater
than 1%
【Storage & Packaging】
The max temperature should be under 65℃ for storage,loading。If for long storage, we advise the
temperature is less than 50℃, Avoid water . Packing : 200liter iron drum ,NW: 170 kgs / barrel . Quality guarantee:
24 Months
61
Lubricant Additives: H4205, General Gear Oil Compound
H4205, General Gear Oil Compound
【Product Name】
Product Name: H4205, General Gear Oil Compound
【Quality Index】
Item
Quality Index
Actual
Measureme
nt Data
Testing Method
30~70
55.2
GB/T265
90
134
GB/T3536
0.90~1.2
1.0638
GB/T2540
25
1.5
0.5
31.06
1.82
0.92
ASTM D 5185
ASTM D5185
ASTM D4629
Motion viscosity，mm2/s
Flashing Point (Aperture) ℃
Density
Element content (m%)：
Sulfur
≥
Phosphor ≥
Nitrogen ≥
【Application】
The latest type complexing agent for general gear oil developed by Research Institute of
Petroleum Processing. 4.5% of the product can be added into paraffin base oil to prepare the vehicle
gear oil of quality grade of GL-5 and viscosity level of 80W/90. The vehicle gear oil prepared has
passed Anti-rust Test of Vehicle Gear Oil: CRC L-33, Load Carrying Capacity Test of Vehicle Gear
Oil CRC L-37, Scratch Resistance Test of Vehicle Gear Oil CRC L-42 and Thermal Oxidization
Stability Test of Vehicle Gear Oil L-60 etc. No.220 heavy load industrial gear oil prepared with
1.5% of H4205 conforms to USS-224.
It can be used to prepare GL-5 vehicle gear oil with the following viscosity grades SAE90,
80W/90, 85W/90 and 85W/140. It can also be applied to the industrial gear oils with following
viscosity grades N68, N100, N150, N220, N320 and N460.
【Recommended Dosage】
Spec Grade
Recommendable adding volume
(m%)
Heavy duty vehicle gear oil GL-5
4.5
Medium load vehicle gear oil GL-4
2.25
Heavy load industrial gear oil
1.5
Normal duty industrial gear oil
1.0
【Storage & Packaging】
200kg net weight in galvanized iron drums.
62
Lubricant Additives: H5039, Antiwear Hydraulic Fluid Additive Package
H5039, Antiwear Hydraulic Fluid Additive Package
【Product Name】
Product Name: H5039, Antiwear Hydraulic Fluid Additive Package
【Quality Index】
Item
Density（20℃）g/cm3
Motion viscosity,40 ℃, mm2/s
Flashing Point (Aperture) ℃
Sulfur %
Phosphor ≥
Quality
Index
1.0-1.1
25-40
≥105
6.5-8.0
3.0~4.0
Actual
Measurement Data
1.06
30.45
148
7.24
3.21
Testing Method
GB/T2540
GB/T265
GB/T3536
SH/T0303
SH/T0296
【Application】
It can be used to prepare high pressure ashless AW hydraulic oil of high grade with its
addition amount of 0.6% to 0.8% (anti-foam agent be added additionally). It can be added into
paraffin grade high viscosity neutral oil (HVIS and HVIW) to prepare products of N32, N46, N68
and N100 viscosity grades. Through the lab physical and chemical properties and high pressure
pump rig test, its quality conforms to the national standard GB11118.1-94 L-HM: Quality Standard
for Mineral Oil Type Excellent Hydraulic Fluid and reaches the requirements as specified in
DENISON HF-0 specification of the United States, it is also in line with the requirements as
specified in ISO11158-97, vickers m-2950-s DIN 51524(ll) as well as cincinnati milacron P-68P-69
P-70, attaining the advanced level of current international products of the same kind.
Properties and purpose: as the product does not contain Zinc and other metals and has
excellent high pressure EP/AW property and thermal oxidization stability, the AW hydraulic oil
prepared with it mainly finds its use in the hydraulic system with over 30.0 Mpa at the plunger
pump and 14.0 to 17.5Mpa pressure at the vane pump; it is an ideal motor transmission medium,
extensively applied in metallurgy, plastic, mine and heavy duty engineering mechanical equipment
such as in the hydraulic system of the truck loader, the excavator, the tilting car, the forming
machine and the pressing machine. It can also extend its service life by reducing the mechanical
wear of the hydraulic machinery and improve its economic benefits by lowering oil consumption
and cost.
【Storage & Packaging】
200kg net weight in iron drums. The temperature shall not exceed 60 celcius during storage,
loading, unloading and producing lubricants, and 45 celcius during long time storage. Avoid contact
with water.
63
Lubricant Additives: Antiwear Additives 304；Dibutyl phosphite
T304, Antiwear Additive, Dibutyl phosphite
【Product Name】
Product Name: T304 Antiwear Additive, Dibutyl phosphite
CAS No. 1809-19-4
【MolecularFormula】
Molecular Formula：(C4H9O)2POH
Molucular Weight：194.0
【Quality Index】
Item
Appearance
Density
Boiling Point
Refraction
Flash Point
Solubility
Phosphor content: P%
Acid number: mgKOH/g≤
Sheet copper erosion grade
(121℃, 3h)
Quality Index
Oily liquid in blank or light
yellow
0.998
95 Celcius
N251.4228
120 F
Organic solvent-soluble
Water-insoluble
14.5-16.0
10
0-1
Testing Method
Eye measurement
SH/T0296
GB/T264
GB/T5096
【Application】
This product is the preferred EP/AW additive from novel phosphorus-containing compounds
for lubrication oil with high EP/AW index and sound compatibility, which can be used to prepare
vehicle gear oil and industrial gear oil, cutting oil and other kinds of oil of various grades. Its
proposed level of addition shall be 0.3% to 1%. It is one of the major organic chemical materials
which can be mixed with other additives to prepare compound oil additives and can also be used to
compound oil flame retardant, pharmacy and perfume.
【Storage & Packaging】
20kg/200kg plastic barrel package
64
Fuel Oil Additives
Fuel Oil Additives: Gasoline Stabilizing Additives
Gasoline Stabilizing Additives
【Product Name】
Product Name：Gasoline Stabilizing Additives
【Quality Index】
1、Appearance
Orange yellow to brownish red liquid
2、Density 20℃ g/cm3
0.87-0.97
3、Kinematic viscosity 20℃ mm2/S
＜ 100
4、Freezing point ℃
＜ -12
【Application】
The products can effectively improve the stability of gasoline and abate the formation of gums and
asphaltines, and also have the effect of metal passivation, which will improve the induction period of
gasoline. Further more, the products have overcome the drawbacks like contamination and precipitation of
the simplex amine antioxidant itself due to the adverse effects of the atmosphere during usage and storage.
【Recommended Dosage】
Normally, the induction period of gasoline will increase 5~8 minutes when 1 ppm of additives is
injected.
【Storage & Package】
This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years.
This product is packed in galvanized iron drums of net weight 180kg each.
65
Fuel Oil Additives: Antistatic Agent ofr Gasoline and Diesel
Antistatic Agent for Gasoline and Diesel
【Product Name】
Product Name: Antistatic Agent for Gasoline and Diesel
【Quality Index】
1. Appearance:
2. Density
yellow or amber liquid
g/ml
0.82-0.96
3. Pour Point
℃
＜ -30
4. Flash Point
℃
report
5. Viscosity cst 40℃
≤200
【Application】
The product can effectively increase the conductivity of the fuel thus inhibit the buildup of
static electricity and lower the risk of fire and explosion during the transportation and mixing of the
gasoline and diesel product.
【Storage & Packaging】
Packed in 200 liter iron drums net weight 175kg each.
【Precautions】
The product is non-corrosive, non-toxic, non-flamable and non-explosive.
66
Fule Oil Additives: Antioxidant T501
Antioxidannt 2.6.4(Com.Grade)(T 501)
【Product Name】
Product Name: Antioxidannt 2.6.4(Com.Grade)(T 501)
Chemical Name: 2,6-Di-tert-butyl-4-cresol Butylated Hydroxytoluene
【Molecular and Structural Formula】
Molecular Formula: C15H24O
Structural Formula:
【Performance Features】
It is a white crystal, odorless, tastless and nontoxic, mp71°C, bp265°C. Insoluble in water and
dilute alkalies, soluble in benzene, toluene, alcohol, gasoline and food oils. Its solubilities are:
alcohol 25%(20°C), bean oil 30%(25°C), cotton seed oil 20%(25°C), lard oil 40%(40°C).
【Quality Index】
technical grade Food grade
Appearance
White crystal
Melting point, °C
69.0-70.0
69-71
Moisture, %≤
0.05
0.10
Incandescence Leavings %,≤
0.01
0.10
Sulfates (based on SO4-2)%, ≤
0.002
Heavy metals (based on Pb),%, ≤
0.0004
Arsenic (As),%, ≤
0.0001
Free phenols(based on p-cresol)%, ≤
0.015
0.02
SH0015-90
GB1900-80
Relative Density
Standard
【Application】
As an food grade Antioxidant, it can delate the rancidity of the food.. It is also a stabilizer of
synthetic rubbers (SBR, NBR, PU, BR), PE,and PVC.
【Recommended Dosage】
Dosage：0.3% in petrol or diesel, 0.012% in wax.
【Storage & Packaging】
Technical grade: composite bag(PPbag inside)25kg; Reagent grade& Food grade: composite
bag(PE bag inside) 25kg.
67
Fuel Oil Additives: Diesel-Oil Cetane Number Improver
Diesel-Oil Cetane Number Improver
【Product
Name】
Product Name: Diesel-Oil Cetane Number Improver
【Quality
Index】
1、Outer appearance
2、Density 20℃
Color to light-yellow transparent liquid
g/cm3
0.800-0.830
3、Kinematic viscosity 20℃ mm2/S
≤ 2.5
4、Freezing point ℃
≤ -40
5、Water content
≤ 0.05
6、Flash point
%
℃
7、Effective constituent
Ambient temperature
%
83 ~ 85
【Application】
This product is to be added to commercial diesel oil for the purpose of improving its cetane number.
【Recommended
Dosage】
Normally, adding 1‰ of this product in diesel oil will raise the cetane number by 1~5 units.
【Storage
& Package】
This product shall be stored in a shady, cool, ventilated, dry warehouse. The shelf life is 2 years.
This product is packed in plastic drums of net weight 150kg each.
【Precautions】
This product is flammable, therefore, shall be kept far away form open flame and heat sources.
68
Fuel Oil Additives: Diesel fuel flow improver
Diesel fuel flow improver
【Product Name】
Product Name: diesel fuel flow improver
【Performance Features】
This new-generation product diesel fuel flow improver,with its long-chained alkyl as well as
polar groups, can increase the dissolving extent of normal hydrocarbon in diesel oil and shield waxy
crystal, being an acidamide compound polymer polymerized from 3 monopolymers
According to relevant tests, it has good receptivity in the diesel oil of 0#,-10#,-20#,-35#. When the
level of addition is about 5/10000, it can decrase the freezing point by 5-30 °C, and cold filter
plugging point by 2-10 °C.
【Quality Index】
1. Appearance:
2. Kinematical Viscosity (40℃)mm2/s:
3. Flash Point ℃:
4. Solidifying Point ℃:
straw yellow liquid
30～80
≥40
≤20
【Storage & Packaging】
It is packed in 170Kg galvanized drums. Prevent from fire and direct sun light during storage.
69
Solvent
Solvent: P-DEB (Para-Di-ethyl Bezene)
P-DEB (Para-Di-ethyl Bezene)
【Product Name】
Product Name: P-DEB (Para-Di-ethyl Bezene)
CAS No.：105-05-5
【Molecular and Structural Formula】
Molecular formula：C10H14，Molecular Weight：134.22
【Quality Index】
Item
P-DEB
Other DEB
C8Aromatics
C9Aromatics
Other C10+
Carbonyl No.
Bromine Index
Total Sulphur
Total Nitrogen
Total Chloride
Colour（Pt-Co）
Active Oxygen
As
Unit
Wt%
Wt%
Wt%
Wt%
Wt%
Mg/l
mgBr/100g
Ppm
Ppm
Ppm
Ppm
Ppb
Indices
≥99.0
平衡
≤0.03
≤0.05
≤0.3
≤1.0
≤5
≤1.0
≤1.0
≤1.0
≤10
≤1
≤1
【Storage & Packaging】
1. UN No.：2049
2. Barrel package( new zinc-plated iron barrel, sealed with pure Nitrogen)
Net weight: 170kg/barrel; Gross Weight: 192kg/barrel. To be delivered with container.
3. Tank package (ISO container tank; sealed with pure Nitrogen)
Dimension is equivalent to 20 feet container.Net Weight: 20 MT/tank; Gross weight: 25MT/tank,
to be delivered to the customers’ directly with container tank.
70
Solvent: Sulfolane
Sulfolane
【Product Name】
Product Name: Sulfolane, Tetrahydrothiophene dioxide;
CAS Number: 126-33-0
【Molecular and Structural Formula】
Chemical Formular: C4H8O2S, Molecular Weight： 120.17
Chemical
Structure：
【Quality Index】
ITEMS
UNIT
TECHNICAL INDEX
Density@30℃
kg/m3
1260-1270
5% Distill off temperature
℃
282 Min
95% Distill off temperature
℃
288 Max
Thermal stability
mgSO2/kg
20 Max
Moisture
%
3.0 Max
Sulfur content
%
26.0-27.0
2-sulfolene
%
0.2 Max
Isopropyl sulfolane aether
%
0.2 Max
Assay
%
99.5 Min.
Ash content
%
0.1 Max
【Application】
Sulfolane is an organic solvent in multi-usage, which can be used in aromatic extraction, gas
puritycation, medical intermediate,organic solvent in petrochemical industry, and addtives in
rubber industry, as well as dyestuff intermediate,etc
【Storage & Packaging】
250kg / drum or according to customer’s request.
71
Adsorbent
Adsorbent: Particulate Clay (Granule Clay)
High Efficiency Particulate Clay (Granule Clay)
【Product Name】
Product Name: high efficiency particulate clay (Granule Clay)
Chemical Name: Calcium, sodium activity bentonite
【Molecular & Structural Formula】
Molecular Formula: （½Ca、Na）0.7（Al、Mg、Fe、
）4（S i、Al）8O20（OH）4·nH2O
The Ca, Na cation including is exchangeable.
【Performance Features】
This product has a moisture absorption, expansion, thixotropy, caking, thickening, stability, bleaching and
strong cation exchange capacity, and has certain adsorption capacity to gas, liquid, and organic substances. The
largest absorbed capacity up to 7-8 times on its own weight, surface active’s acid bleaching clay having
Adsorption, permutation Features, have a good bleaching purification to the Pigment and animal or vegetable oil.
【Quality Index】
Index
NC－01
NC－02
Item
A
B
A
B
Convention Improved water
al type
resistance type
Surface area， m2/g
≥
200
200
220
200
220
Crushing strength，N/Each
≥ 0.50
0.60
0.50
5.0
5.0
Bromine index，mgBr/100gOil
≤
5.0
5.0
5.0
5.0
5.0
Below 300μm， %
≤ 5.0
5.0
5.0
≥
85.0
85.0
85.0
Particle 1000～300μm， %
size
Diameter 1～1.4mm，%
≥ 85.0
85.0
Length 2～8mm， %
≥ 85.0
85.0
Free acid (by H2SO4）
，%
≤
0.20
0.20
0.20
0.20
0.20
Bulk density，
g/ML
0.6～0.9
0.6～0.9
0.6-0.9 0.6-0.9 0.6-0.9
Water-content % ≤
5.0
3.0
5.0
5.0
5.0
Notes：1、NC－02 is renewable.2、Particle size and Water according to user’s requirements。
【Application】
This product can be widely used in aromatics adsorbent device as catalytic, removing olefin in them. Being
stable, and effect is great. After Improvement , applications in benzene hydrogenation device has being developed.
This product has a high degree of bleaching power and activity, having better effect to the decolorization,
dehydration, adsorption, and purification of aviation kerosene, gasoline, diesel oil, lubricating oil, solvents oil, and
other petrochemical products. Also develop the application to removing nitrogen in extraction, the effect is better
than similar products.
【Storage & Packaging】
The products should be stored in moistureproof, sun protection, anti-stress and ventilated, dry warehouse.
Packaging NO1: 25 kg / bag , two layers plastic film bag inside, and woven bag outside; Packaging NO2: 850 kg
/jumbo bag packaged. Can also be packed according to user’s requirements.
【Precautions】
This product is non-toxic solid particles, slightly acidic, and with a small amount of dust, but it’s without
Pollution to the environment or to the water. Slight corrosion to the unit. Effect to the skin cause of subacidity,
breathe in dusts will have little influence.
72
Adsorbent: Activated Clay
Activated Clay
【Product Name】
Product Name:
activated clay
Chemical Name: Calcium, sodium activity bentonite
【Molecular & Structural Formula】
(½Ca,Na)0.7(Al,Mg,Fe)4(S I,Al)8O20(OH)4·nH2O
The Ca, Na cation including is exchangeable.
【Performance Features】
This product has a moisture absorption, expansion, thixotropy, caking, thickening, stability,
bleaching and strong cation exchange capacity, and has certain adsorption capacity to gas, liquid,
and organic substances. The largest absorbed capacity up to 7-8 times on its own weight, surface
active’s acid bleaching clay having Adsorption, permutation Features, have a good bleaching
purification to the Pigment and animal or vegetable oil.
【Quality Index】
Item
BY—1020
BY—1040
BY—1060
Decolorization ability
≥150
≥153
≥154.5
Decolorization rate
≥80
≥85
≥90
Free acid (by H2SO4）%
≤0.2
≤0.2
≤0.2
Water-content %
≤12
≤12
≤12
Particle size (through 200 mesh)%
Granularity (200 mesh)
≥95
≥95
≥95
Arsenic -content %
≤0.0005
≤0.0005
≤0.0005
【Application】
This product is rich of montmorillonite content of bentonite as raw material, inorganic acid
treatment, rinsing, drying the adsorbent obtained, showing a white or pink powder, no mechanical
impurities.The product is mainly used for grease industry (animal or vegetable oil refining
bleaching), daily chemical industry (fancy soap) and petrochemical industry (including lubricating
oil, paraffin, naphthene acid and etc.) and medicament industry. The quality of our products exceed
the national standard, its performance is stable, strong bleaching (tons of oil to add less), filtration
speed, and for different manufacturers of oil, adding suitable formula to achieve customer
satisfaction results.
【Storage & Packaging】
To be stored in a moisture proof, well ventilated dry warehouse. Avoid direct sun light or pile
up under heavy load. Packaged in woven sacks lined with double layer plastic bags net weight 25kg
each, or jumbo gags 850kg each
【Precautions】
Non toxic particles with slight acidity and a little amount of fine dust. Non hazardous to the
environment and does not cause polution to the water bodies. It will cause a slight corrossion to the
plant. Avoid contact with skin or inhalation of the fine dust.
73
Oil Drilling Chemicals
Oil Drilling Chemicals: Complex Ionic Acrylate
Complex ionic acrylate
【Product Name】
Trade name:Complex ionic acrylate（FA367）
【Performance Features】
1.Performing as drilling Fluids Inhibitor and shale coating agent.
2.Improve the mud flow type, and reduce the coefficient of friction.
【Quality Index】
Item
data
Apparent viscosity (1% aqueous solution),mPa·s
≥30.0
Moisture, %
≤9.0
Granularity (sieve 0.9mm sieve residue), %
≤15.0
pH valaue
7.5 ~ 9.0
Apparent viscosity, mPa·s
≥25.0
Water
Plastic viscosity, mPa·s
≥8.0
solution
Filter Loss, ml
≤15.0
Apparent viscosity, mPa·s
≥15.0
Complex
salt
Plastic viscosity, mPa·s
≥10.0
solution
Filter Loss, ml
≤10.0
Increasing rate of apparent viscosity in( Base paste
+ Sample +20gBentonite) at 160 ℃, after hot
≤250.0
rolling. %
【Application】
The product can inhibit the hydration, swelling and dispersion of shale stone effectively. It also
can improve the flow type, reduce coefficient of friction. It can be used in mud under the
circumstance of high solid concentration, high-density.
【Recommended dosage】
0.3~0.5%;
【Storage & Packaging】
The product should be stored in dry, ventilated warehouse, and avoid direct sunlight and rain.
The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially slippery.
As a powder, it may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after sink contact.
Flushing open eyes for several minutes under running water. If necessary, seeking medical advice.
74
Oil Drilling Chemicals: Sulfonated Phenol-formaldehyde resin
Sulfonated phenol-formaldehyde resin
【Product Name】
Trade name：Sulfonated phenol-formaldehyde resin
Chemical Name：Sulfomethylation phenolic resin
【Molecular & structural formula】
Formula [C8H8O2]n
【Performance Features】
Work as fluid loss control chemical under the circumstance of high temperature or in
salt-bearing mud. Its capacity of high temperature-resistance reaches up to 200 ℃.
【Quality Index】
data
Items
dry powder ofⅠ-type
dry powder of Ⅱ-type
Free-flowing
powder, Free-flowing powder, color
Appearance
color of
10% water of 10% water solution is
solution is brown-red
brown-red
Content on dry basis,
%
Cloud point salinity, (as Clmeter), g/L
HTHP filtrate loss,
mL
Apparent viscosity, mPa.s
≥90.0
≥90.0
≥110
≥160
≤25.0
≤35.0
≤25.0
≤50.0
【Application】
The product’s capacity of high temperature-resistance reaches up to 200 ℃. It can be applied
widely in water-base mud in deep or ultra-deep well. It has the excellent performance of high
temperature resistance, salt-resistance, mud cake improving. It functions well in high salinity and
saturated brine drilling fluids system It can get a better result to be used with sulfonated lignite and
sulfonated tannin.
【Recommended dosage】
Recommended amount： 3.0-5.0%.
【Storage & Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially
slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin,
eyes, and respiratory system. Protective equipment should be available when working. Washing
with water after sink contact. Flushing open eyes for several minutes under running water. If
necessary, seeking medical advice.
75
Oil Drilling Chemicals: Ammonium Hydrolyzed Polyacrylonitrile
Ammonium Hydrolyzed Polyacrylonitrile
【Product Name】
Trade Name: Ammonium Hydrolyzed Polyacrylonitrile（NH4HPAN）
Chemical Name: Ammonium Hydrolyzed Polyacrylonitrile
【Molecular & Structural Formula】
Molecular formula: (NH4HPAN)n
【Performance Features】
1. Work as water loss control chemical.
2. This product is easily dispersed in the drilling fluids and has the good compatibility with
other mud chemicals.
3. This product also has a certain degree of calcium&salt-resistance capacity.
【Quality Index】
Physical and Chemical data
Items
data
appearance
Free-flowing powder
Moisture , %
≤10.0
Screen remains,
≤5.0
%
Content of Ammonium ,
≥7.0
%
≤2.0
Residual after burning , %
Base mud
After adding
NH4HPAN
Mud properties
Freshwater
drilling fluids
filtration loss，ml
22±2.0
brine drilling fluids
60±5.0
Apparent viscosity，mPa.s
5~7
4~6
Filter Loss，ml
≤12.0
≤30.0
Apparent viscosity，mPa.s
≤8.0
≤8.0
【Application】
The product is mainly applied in water-based mud as fluid loss additive and inhibitor. Also it
has good capacity of calcium&salt-resistance.
【Recommended dosage】
Freshwater mud: 0.5%.
Brine mud:.1.5%
【Storage & Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially slippery.
Take attention to prevent package damaging.
As a powder, it may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking
medical advice.
76
Oil Drilling Chemicals: Sodium Carboxymethyl Cellulose (LV)
Sodium Carboxymethyl Cellulose（LV）
【Product Name】
Trade Name: Sodium Carboxymethyl Cellulose（CMC-LV）
Chemical Name: Sodium Carboxymethyl Cellulose
【Molecular formula】
Formula:C6H7O2（OH）3Na
【Performance Features】
1.Strong hygroscopicity, insoluble in water and form a viscous liquid.
2. Provide thin tough filter cake, and reduce fluid loss effectively.
3. Strong capacity of salt-resistance & calcium-resistance .
4. Very convenient to be applied, good compatibility with mud
【Quality Index】
Data
Items
CMC－LV
appearance
White or light yellow powder
moisture，％ ≤
10
purity ，％ ≥
80.0
Degree of substitution ≥
0.80
pH value
7.0～9.0
Filter Loss, ml
≤
10.0
【Application】
The product is a kind of anionic polymers, mainly used to reduce fluid loss, and provide low
viscosity. It also has the following characteristics: excellent capacities of salt-resistance and
calcium-resistance, high efficiency of fluid loss reducing, and so on.
【Recommended dosage】
Recommended dosage: 0.2～0.5％。
【Storage & Packaging】
The product should be stored in dry, ventilated warehouse, and avoid direct sunlight and rain.
The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially slippery.
Take attention to prevent package damaging.
As a powder, it may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical
advice.
77
Oil Drilling Chemicals: Sodium Carboxymethyl Cellulose (CMC-HV)
Sodium Carboxymethyl Cellulose（CMC-HV）
【Product Name】
Trade Name: Sodium Carboxymethyl Cellulose（HV-CMC）
Chemical Name: Sodium Carboxymethyl Cellulose
【Molecular & structural formula】
Molecular formula: C6H7O2（OH）3Na
【Performance Features】
1. Work as mud viscosifier..
2. Good hygroscopicity, soluble in water to form viscous liquid.
3. Excellent capacity of salt-resistance and calcium-resistance.
4. Good compatibility with mud, and convenient to be applied..
【Quality Index】
Items
data
HV－CMC
White or light yellow powder,
10
85.0
0.80
6.5～8.0
10.0
appearance
Moisture，％ ≤
Purity ，％ ≥
Degree of substitution ≥
pH value
Filter Loss, ml
≤
plaint water
Viscometer reading,
40g/dm3 Salt
30
600r/min,
≥
water
Saturated brine
【Application】
Be used to increase the drilling fluid viscosity, alongside with good fluid loss reducing results.
【Recommended dosage】
0.1～0.3％。
【Storage & Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially slippery.
Take attention to prevent package damaging.
As a powder, it may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical
advice.
78
Oil Drilling Chemicals: Sulfonated Tannin
Sulfonated Tannin
【Product Name】
Trade name: Sulfonated tannin（SMT）
Chemical name: Sulfomethylation gallic tannin sodium
【Molecular Formula and Structure Formula】
Formula Structure: C76H52O46
【Performance Features】
Work as a mud thinner. Appearance: brown, free-flowing powder or granules.
Good hygroscopicity, dissolution in water quickly.
【Quality Index】
Test items
data
Moisture, %
≤10.0
Dry residuals water-insoluble, %
≤5.0
100rpm reading
Under the condition of 24 ± 3 ℃
≤10.0
viscosity, mPa·s Under the condition of 24 ± 3℃ after 180 ℃ 16h placing
≤12.0
in rolling oven
Apparent
24 ± 3 ℃
≤8.0
viscosity, mPa·s
Under the condition of 50 ± 3 ℃ after 180 ℃ 16h
≤10.0
placing in rolling oven
Yield point, Pa
24 ± 3 ℃
≤2.0
Under the condition of 24 ± 3 ℃ after 180 ℃ 16h
≤2.0
placing in rolling oven
1min static shear 24 ± 3 ℃
≤1.0
strength , Pa
Under the condition of 24 ± 3 ℃ after 180 ℃ 16h
≤1.0
placing in rolling oven
【Application】
The products can be applied in the various types of water-based drilling fluids acting as an
excellent thinner agent. It can also performance well in salt-water base drilling fluids and saturated
brine drilling fluids as a thinner. It’s capacity of calcium-resistance reaches more than 1000mg/L. It
also have an excellent thermal stability under the high temperature of 180-200 ℃ and provides mud
good rheological properties.
【Recommended dosage】: 1.0% ～2.0%.
【Storage & Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net weight
of the product is 25Kg ± 0.25Kg.
【Precautions】
1. Spilled product in contact with water or moisture causes surfaces to become especially slippery.
Take attention to prevent package damaging.
2. As a powder, it may be harmful to the skin, eyes, and respiratory system.
3. Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking
medical advice.
79
Oil Drilling Chemicals: Sulfonated Lignite
Sulfonated lignite
【Product Name】
Trade Name: Sulfonated lignite（SMC）
【Performance Features】
1.Work as filtrate reducer, especially under the condition of hi-temperature.
2.Also work as a thinner.
【Quality Index】
Physical and chemical data
Appearance
Black-brown powder
Moisture,
≤15.0
%
%
≥50.0
%
Drilling Fluids Performance
0
Water-soluble dry humic acid content
Chrome in dry base)
data
Measured at 24 ± 3 ℃
measured at
after 180 ℃ 16h placing
24 ± 3 ℃
in rolling oven
items
mud
100rpm reading viscosity, mPa·s
39-54
66-96
12.5-17.5
20-26
≥75
≥80
Apparent viscosity, mPa·s
≤8
≤10
1min gel strenth, Pa
≤1
≤1
Apparent viscosity, mPa·s
Rate of viscosity reduction,
mud+
SMC
%
Filter Loss, ml
≤10
≤11
【Application】
The product can resists the temperature of 200 ℃ ~ 220 ℃. It can be added directly to
water-base mud system through rig hopper. Normally it would be applied along with potassium
humate, lignite resin and sulfonated phenol-formaldehyde resin.
【Recommended dosage】 :3-5%.(w/v)
【Storage & Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially slippery.
Take attention to prevent package damaging.
As a powder, it may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking
medical advice.
80
Oil Drilling Chemicals: Sulfonated Asphalt
Sulfonated Asphalt
【Product Name】
Trade Name Sulfonated Asphalt（FT-1）
Chemical Name Sulfonated Asphalt
【Performance Features】
1. It can disperse in drilling fluids quickly.
2. Work as shale inhibitor. It can improve the mud cake, reduce the coefficient of friction and
reduce the water loss..
3. Has excellent capacity of hi-temperature and salt-resistance, and be compatable with other
mud chemicals.
【Quality Index】
Items
data
pH value（1% aqueous solution）
8—9
sodium sulfonated content，%
≥
10.0
Water-soluble substance content，%
≥
70.0
Oil-soluble substance content，%
≥
25.0
HTHP Filter Loss，ml/30min
≤
25.0
the rate of apparent viscosity reducing，%
≥
45.0
the rate of yield point，%
≥
50.0
【Application】
It can be added directly into the drilling mud through rig hopper. It can fills and seals the pore
throats and fractures in the formation besides the functions of lubricating and water loss control
(especially the hi-temperature filtrate).
【Recommended dosage】
1.0～1.5%。
【Storage & Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially slippery.
Take attention to prevent package damaging.
As a powder, it may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical
advice.
81
Oil Drilling Chemicals: Potassium Polyacrylaamide
Potassium Polyacrylamide
【Product Name】
Product name: Polyacrylamide sylvite (KPAM)
【Performance Features】
1. Work as an excellent shale inhibitor or flocculant.
2. Also functions as water loss control agent, flow type improver and lubricant..
3. Good capability of salt-resistance.
【Quality Index】
Items
data
Appearance
white or yellow free-flow powder
Moisture, %
≤10.0
Purity, %
≥75.0
Remains content after screening, %
≤10.0
Degree of hydrolysis, %
27.0-35.0
Content of potassium, %
≥11.0
Content of Cl-, %
≤1.0
Intrinsic viscosity, 100ml/g
≥6.0
【Application】
The product can effectively coated cuttings and prevent mud making of formation. It can
prevent sloughing and keep the well wall stable at the presence of cation Potassium. Also it is
effective in mud water loss control and mud rheological properties. It has good compatability with
other mud chemicals. And the product can be applied in dispersed mud system or non-dispersed
mud system.
【Recommended dosage】
Freshwater mud: 0.2-0.5%;
Saturated brine mud: 0.7-1.5%.
【Storage & Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially slippery.
Take attention to prevent package damaging.
As a powder, it may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical
advice.
82
Oil Drilling Chemicals：Hydrolyzed Polyacrylonitrile Potassium
Hydrolyzed Polyacrylonitrile Potassium
【Product Name】
Trade Name: Hydrolyzed Polyacrylonitrile potassium (KHPAN)
Chemical Name: Hydrolyzed Polyacrylonitrile potassium
【Molecular Formula and Structure Type】
Formula: (KHPAN) n
【Performance Features】
1．Soluble in water, and the solution is alkaline.
2．Work as shale inhibitor and well wall stabilizer.
3．Also be applied as water loss conditioner.
【Quality Index】
Appearance
Free flowing powder
Moisture, %
≤7.0
Content of Water-insoluble substance, %
≤5.0
Content of Potassium, %
≥20.0
Drilling fluids Performance
In Freshwater
Test Item
drilling fluids
In Brine
drilling fluids
Filter Loss, ml
25±2.0
55±3.0
Apparent viscosity, mPa·s
6.0-8.0
4.0 -8.0
Filter Loss, ml
≤15.0
≤15.0
Apparent viscosity, mPa·s
≤10.0
≤12.0
Basic mud
After adding
K-HPAN/H
【Application】
The product acts as excellent shale inhibitor and water loss conditioner. It can be applied in
varieties of anionic or zwitterionic polymer mud. It can prevents caving-in and reduces trouble and
accidents in well-bore.
【Recommended dosage】 Fresh water mud: 0.5%. Salt water mud: 1.5%.
【Storage & Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially slippery.
Take attention to prevent package damaging.
As a powder, it may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking
medical advice.
83
Oil Drilling Chemicals: Hydrolyzed Polyacrylamide Powder
Hydrolyzed Polyacrylamide Powder
【Product name】
Merchandise name：Hydrolyzed Polyacrylamide powder (HPAM)
Chemistry name：Hydrolyzed Polyacrylamide powder
【Molecular formula】
Molecular formula: (C3H5NO)n
【Performance Features】
1, Working as flocculant and shale inhibitor. Easily soluble in water.
2, Has the excellent capacity of hi-temperature-resistance, salt-resistance and excellent
shearing& thinning properties.
【Quality index】
Item
data
Appearance
The free-flow, white or yellow powder
Fineness, 0.45mm sieve
≤10
margin ，%
moisture，%
≤10
Purity ，%
≥90
The degree of hydrolysis，%
20-30
Intrinsic viscosity，mL/g
≥700
Residual monomer，%
≤0.5
【Application】
The product can prevent efficiently formation from hydrating, swelling and dispersing by
coating or flocculating cuttings. Also it can improve mud flow type and reduce the coefficient of
friction.
【Recommended dosage】
Fresh water mud: 0.2-0.5%
Saturated salt mud: 0.5-1%.
【Storage & Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially slippery.
Take attention to prevent package damaging.
As a powder, it may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after skin
contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical
advice.
84
Oil Drillig Chemicals: Barite Powder
Barite Powder
【Product Name】
Trade Name: Barite powder
Chemical Name: Barium sulfate
【Molecular Formula and Structure】
Formula: BaSO4
【Performance Features】
1. High density and working as weighting material.
2. Strong chemically inert.
3. Acid and alkali-resistant,, low hardness.
【Quality Index】
items
data
First-class Secondary class
4.20
4.00
Density , g/cm3
≥
Content of water-soluble alkaline-earth metal (base on
250
calcium )，mg/kg
≤
75µm screen residual ,% (m/m)
≤
3.0
Particles smaller than 6μm,% (m/m)
≤
30
Before adding calcium sulfate
≤
Viscosity,
130
150
mPa·s
after adding calcium sulfate ≤
【Application】
Mainly be used as weighting material.
【Recommended Usage】
It can be added into drilling fluid through rig hopper as desired.
【Storage and Packing】
It should be stored in dry and ventilated warehouse. The guarantee period is 3 years.
It should be packed in plastic woven bag. The net weight of each bag is 25Kg ± 0.25Kg.
【Precautions】
It may be harmful to eyes and respiratory system.
It may cause people discomfort after inhalation.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical
advice.
85
Oil Drilling Chemicals: Sefstromite Powder
Sefstromite Powder
【Product Name】
Trade Name: Sefstromite powder
【Molecular Formula and Structure Type】
Structural formula: x (FeTiO3) :( 1-x) (V2O5)
【Performance Features】
1. High density, high acid-solubility and low content of alkaline-earth metal.
2. No radioactive element.
3. Not dissolvable in water, non-toxic and tasteless.
【Quality Index】
items
solubility in hydrochloride, %
data
＞
75.0
Density, g/cm3
＞
4.50
Water-soluble alkaline-earth metal (base on calcium), mg/kg
300
≤
200 mesh screen residuals ,
≤
3.0
325 mesh screen residuals ,
≤
5-20
Moisture, %
≤
1.0
Before adding calcium sulfate
≤
125
Viscosity, mPa·s
After adding calcium sulfate
≤
125
【Application】
Mainly be used as weighting material. It can be acidized to protect the pay-zone
【Recommended dosage】
It can be added into drilling fluid through rig hopper as desired.
【Storage and Packing】
It should be stored in dry and ventilated warehouse. The guarantee period is 3 years.
It should be packed in plastic woven bag. The net weight of each bag is 25Kg ± 0.25Kg.
【Precautions】
It may be harmful to the skin, eyes and respiratory system.
It may cause people discomfort after inhalation.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical
advice.
86
Oil Drilling Chemicals: Ilmenite Powder
Ilmenite Powder
【Product Name】
Trade Name: Ilmenite powder
【Molecular Formula and Structure Type】
Structural formula: FeTiO3
【Performance Features】
1. High density, high acid-solubility and low content of alkaline-earth metal.
2. Non-radioactive element.
3. Not dissolve in water, non-toxic and tasteless.
【Quality Index】
tems
solubility in hydrochloride, %
＞
data
60.0
Density , g/cm3
＞
4.50
Fineness (125μm sieve residual percent) ,%
≤
5.0
water content, %
≤
1.5
Before adding calcium sulfate,
≤
125
Viscosity, mPa·s
After adding calcium sulfate,
≤
125
【Application】
Mainly be used as weighting material. It can be acidized to protect the pay-zone
【Recommended dosage】
It can be added into drilling fluid through rig hopper as desired.
【Storage & Packaging】
It should be stored in dry and ventilated warehouse. The guarantee period is 3 years.
It should be packed in plastic woven bag. The net weight of each bag is 25Kg ± 0.25Kg.
【Precautions】
It may be harmful to the skin, eyes and respiratory system.
It may cause people discomfort after inhalation.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking
medical advice.
87
Oil Production Chemicals
Oil Production Chemicals：Crude Oil Paraffin Inhibitors & Removers
Crude Oil Paraffin Inhibitors & Removers
【Product Name】
Product Name：Crude Oil Paraffin Inhibitor
【Performance Features】
Using chemical agent to inhibit the cristilization of paraffin wax. Paraffin Removers include oil-base,
water-base and emulsion type paraffin removers. Paraffin Inhibitors include oil soluble surfactant, water
soluble surfactant, and polymeric paraffin inhibitors.
【Quality Index】
Data
Item
Water base
Oil base
Appearance
Uniform liquid
Condensation point ℃
Lower than the lowest local temperature in winter
solubility
Water soluble
Not water soluble
pH Value
7.0～10.0
Paraffin Inhibition rate
≥15%
≥20%
Paraffin melting rate g/min
≥0.025
Organic Chlorine content
none
none
Carbon Disulfide Content
none
none
【Application】
I. Paraffin Remover
1. Oil-base paraffin remover: A mixture of compositional formulation by various organic solvents,
mutual solvents and oil soluble surfactants. One of the widely used paraffin removers because of its good
capability of dissolving paraffin and paraffin removing effect.
2. Water-base paraffin remover: water-base paraffin remover uses water as the dispersing media, mixed
with surfactant, mutual solvents or alkaline materials. It changes the surface of the pipelines into a
hydrophilic surface by moisturing which helps the paraffin wax to fall off and inhibit the re-deposition. As
compared to oil-base paraffin removers, water-base paraffin removers represent the present direction of
development since it is more safe and cause less polution to the environment, although a little less effective
in paraffin removal.
3. Emulsion type paraffin remover: The product is an oil-water emulsion formed by emulsifying organic
solvents and water with the existance of surfactants. It combines the characteristics of oil-base and
water-base paraffin removers. First, select a non-ionic surfactant as a emulsifier to emusify the oil-base
paraffin remover; then, break the emulsion before the paraffin remover reaches paraffin precipitation section
of the oil well and release two types of paraffin removers to work together. This remover keeps the high
effectiveness of oil-base remover and the safety of water-base remover, at the same time overcomes the
flamability of oil-base paraffin remover and low efficiency of water-base remover, is a commonly used type.
II．Paraffin Inhibitors
1. Oil soluble surfactant paraffin inhibitor: a compositional formulation of organic solvents and a
variety of surfactants. It functions by changing the property of paraffin crystal surface. The surfactants are
adsorbed at the paraffin crystal surface and impart polarity to it, thus preventing the further precipitation of
paraffin molecules.
2. Water soluble surfactant paraffin inhibitor: a compostional formulation of formaldehyde and a variety
of surfactants. By means of adsorption and eutectic crystalization to paraffin hydrocarbons, it inhibit the
growth of the paraffin crystal nucleus; at the same time, it prevents the deposition of paraffin crystals on
the surface of pipelines and pumping rods by moisturing the surfaces.
3. Polymeric paraffin inhibitor: Formed by dissolving the oil soluble resins in oil solvents. It has carbon
chain segments similar to that of paraffin. At low concentration, it can form a network throughout the crude
oil. Paraffin hydrocarbons are adsorbed onto its network and form eutectic crystalization, separated from
each other and unable to glomerate and grow bigger.
【Storage & Packaging】
The product is packed in galvanized iron drums. To be stored in a cool, well ventilated dry warehouse.
Avoid direct sunlight and keep away from flames.
【Precautions】 This product is toxic and inflammable. Handle with care.
88
Oil field chemicals: Viscosity reducer for viscous crude
Viscosity Reducer for viscous crude
【Product Name】
Product Name: Viscosity reducer for viscous crude
【Performance Features】
1．Emulsifing and Viscosity reducing.
2．Moisturing and reducing the frictional resistance.
【Quality Index】
Item
Appearance
Solubility
pH 值
Surface tension (for Liquid: 1% water solution, for Solid:
0.3% water solution，mN/m
Interfacial tension(for Liquid: 1% water solution,for solid:
0.3% water solution, mN/m
Viscosity
Viscosity of
≤1000
drop
Crude
(50 ℃)
mPa•s
1000 ～ 10000
10000 ～ 50000
Stability of the emulsion
Natural settling dehydration rate
data
Liquid
Solid
Free flowing
powder or
particles
Uniform
liquid, No
impurities
Water soluble
6 ～ 8
≤32
≤3
≥95.0 %
≥98.0 %
≥99.0 %
Grade 1～4
≥80 %
【Application】
1. Using water soluble surfactant as emulsifier, inject the emulsifier water solution into the oil
well or pipeline, and disperse the crude oil into o/w type emulsion. Thus Viscosity and
frictional resistance is greatly reduced because the fricional resistance between oil slicks
become the resistance between water slicks
2. Moisturing the surface of pipeline or pumping rod，change it into hydrophilic and form
continuous water slicks, thus reducing the resistance in the crude oil flow.
【Storage & Packaging】
Packed in iron drums. The product shall be stored in a cool, well ventilated dry warehouse.
Always keep the right side up during transportation. Avoid direct sunlight and open flame.
【Precautions】
May have harmful effect if contact with skin, eyes and respiratory system, or enter the human
body. The operators shall wear proper protection when handling. Wash with water immediately if
contact with skin occurs.
89
Oil field chemicals: Crude Oil demulsifier
Crude Oil Demulsifier
【Product Name】
Product Name: Crude Oil Demulsifier
【Performance Features】
The demulsifier molecules can infiltrate and attach to the interface of the emulsion drops,
substitute the emulsifier and break the surface slick, release the disperse phas, gather and split, thus
breaking the emulsion.
【Quality Index】
Item
Data
Colour of the specimen shall be similar to that of the guide
Appearance
sample. No impurities, not laminating.
Condensation Point
Lower than the lowest local environmental temperature.
Flash Point
>20
viscosity
≤110％ of that of the guide sample
Relative dehydration rate
≥90％
Water phase cleanness
Grade 1
Dehydration
interface
Not lower than that of the guide sample
condition
【Application】
High activity and good dehydration effect. Not only lower the water contentin the purified oil,
but also decrease the oil content of the water of dehydration. Clearer water is obtained.
【Storage & Packaging】
Packed in iron drums. The product shall be stored in a cool, well ventilated dry warehouse.
Always keep the right side up during transportation. Avoid direct sunlight and open flame.
【Precautions】
May have harmful effect if contact with skin, eyes and respiratory system, or enter the human
body. The operators shall wear proper protection when handling. Wash with water immediately if
contact with skin occurs.
90
Acid Fracturing Chemicals
Acid Fracturing Chemicals: Hydroxyl Guar Gum
Hydroxyl Guar Gum
【Product Name】
Trade Name: hydroxyl guar gum
【Performance Features】
1. Good capacity of hi-temperature-resistance and excellent stability.
2. Having excellent electrolyzed-resistance and excellent shearing performance.
3. Effectively reducing the pollution to formation.
【Quality Index】
Data
Items
Grade I
Grade II
Appearance
Light yellow powder
Apparent viscosity, mPa·s
≥110
≥105
Water-insoluble substance Contents, %
≤4.0
≤7.5
Good cross-linking, Good cross-linking, can
Crosslinking characteristics
be picked or hanged by
can be picked or
glass rod
hanged by glass rod
Moisture content,%
≤10.0
≤10.0
pH Value(0.6 % water solutioni)
6.5～7.5
6.5～7.5
Hydroxypropyl substitution MS
≥0.30
≥0.15
flowability
good
average
【Application】
As an advanced non-ionic thickener, it has a good dispersion and solubility in water. It can be
applied along with anionic, cationic or non-ionic surfactant. A fracturing fluid will be made by
mixing guar gum solution into cross-linking agent and proppant to enhance oil recovery in the
operation of Enhance Oil Recovery.
【Recommended dosage】
0.3%~0.5%.
【Storage and Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions 】
Spilled product in contact with water or moisture causes surfaces to become especially slippery.
Take attention to prevent package damaging.
As a powder, it may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after sink
contact. Flushing open eyes for several minutes under running water. If necessary, seeking medical
advice.
91
Acid Fracturing Chemicals: Fracture Proppant
Fracture Proppant
【Product Name】
Product Name: Fracture Proppant
【Performance Features】
The property ensures that under the high clossing pressure environment, the proppant will
work effectively to prevent the fractures from closing. With different sizes and ingredients, the
products have different strength. The higher the intensity, the stronger the bearing pressure ability.
Fine-grained pellet, with high roundness. The even pellet will increase the proppant’s
property of bearing pressure and permeability. Normally, pellets with diameter of 0.45~0.9mm are
widely used, and few have that of 0.9~1.23mm.
Few impurities. Impurities in fracture proppant mainly include carbonate, feldspar, iron oxide,
clay and other materials. In application, we use Acid solubility to weigh the content of carbonate,
feldspar, iron oxide in the pellets; while Turbidity to test for clay, silt and other inorganic. Too much
impurity will block the fractures, hence reduces flow conductivity.
Low density. Density is no more than 2000kg/m3, which benefits the fracturing fluid to
transport proppant effectively.
Stable chemical property. The proppant bears chemistry inertia in the high temperature salt
water, and it has no chemical change with the fracturing fluid and the oil-bearing reservoir fluid,
which further avoids the pollution of fractures.
【Specifications of Product】
Crushing Resistance Pressure Testing and Specifications of Proppant
Bulk Density/
Size
Clossing
Bearing
Crushing
Apparent
um
Pressure
Mpa
Pressure
kN
Rate %
Density g/cm3
3350-1700（6/12 mesh）
2360-1180（8/16 目）
1700-1000(12/18 mesh）
1700-850（12/20 mesh）
1180-850（16/20 mesh）
1180-600（16/30 mesh）
850-425（20/40 mesh）
600-300（30/50 mesh）
≤1.65/≤3.00
≤1.80/≤3.35
＞1.80/＞3.35
≤1.65/≤3.00
≤1.80/≤3.35
＞1.80/＞3.35
-
52
52
52
52
69
69
52
69
86
52
69
86
86
86
86
105
105
105
105
140
140
105
140
174
105
140
174
174
174
174
≤25.0
≤25.0
≤25.0
≤25.0
≤20.0
≤20.0
≤9.0
≤5.0
≤5.0
≤8.0
≤6.0
≤5.0
≤10.0
≤10.0
≤10.0
425-250（40/60 mesh）
425-212（40/70 mesh）
212-106（70/140 mesh）
【Application】
The proppant is mainly used in the oil and gas wells to keep the fracture open so as to provide
a conductive path connecting a larger area of the reservoir to the well, thus increase and restore
the rate at which oil and gas can be produced from the desired formation, meanwhile extend the
service period of the wells.
【Recommended Dosage】
Depend on the actual fracturing situation.
【Storage & Packaging】
Open flame is strictly prohibited in storehouse. Packing is no loosing, no leaking and label is
affixed. Storage in the open is prohibited, avoiding exposure to weather. All packing bags contain
an inner lining and shrink film outside.
【Precautions】Nontoxic and harmless; please store it in airtight container and in dark place.
92
Acid Fracturing Chemicals: Clay Stabilizer
Clay Stabilizer
【Product Name】
Trade Name: Clay Stabilizer（CPCS）
Chemical Name: Quaternary Ammonium Salt
【Molecular Formula and Structure Type】
Formula:（C8H16NCl）n（C3H5NO）n
【Performance Features】
1. The product is a kind of organic cationic polymer, and it can adsorb firmly on the surface of
formation clay and stabilize clay.
2. it has good stability, also it is easy to be used.
【Quality Index】
items
data
Appearance
White or light yellow viscous liquid
Solids content，% ≥
50.0
Density，%
1.10±0.05
pH value
7-9
【Application】
The product should be used in fracturing fluids and prevent the reservoir clay from swelling
and dispersion.
【Recommended dosage】
Reference dosage: 0.5-2%.
【Storage & Packaging】
The product should be stored in dry workplace. Please avoid direct sunlight and. The guarantee
period of the product is 1 years. The product is packed in plastic barrel. The net weight of the
product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product would cause surfaces to become especially slippery. Take attention to prevent
package damaging.
It may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Wash with water after skin contact.
Flush open eyes for several minutes under running water. If necessary, seek medical advice.
93
Acid Fracturing Chemicals: Cleanup Additives
Cleanup Additive
【Product Name】
Product Name：Cleanup additive
【Performance Features】
1. The product is a colorless or light yellow transparent liquid.
2. The product can quickly and efficiently reduce the interfacial tension and increase interfacial
additive
3. With the help of the product, the fracturing fluids can go smoothly into the formation and
return completely.
【Quality Index】
items
data
Appearance
Colorless or light yellow transparent liquid
Density，g/cm3
0.95～1.05
pH value
Freezing Point,℃
7～9
≤
-1
Surface tension（1.0% Solution）,mN/m≤
Contact angle (1.0% Solution) ,°
≥
Solubility in water
Cleanup ratio
30
45
No turbidity or sedimentation or stratification
≥
15%
【Application】
As an additive for oilfield fracturing fluids, The product has the functions as following:
reducing interfacial tension, increasing contact angle and reducing capillary pressure. As a result it
can eliminate formation plugging and improve the rate and velocity of fluid return and then reduce
damage to formation.
【Recommended dosage】
0.5%～1.5%.
【Storage & Packaging】
The product should be stored in dry workplace. Please avoid direct sunlight and. The guarantee
period of the product is 1 years. The product is packed in plastic barrel. The net weight of the
product is 25Kg ± 0.25Kg.
【Notes】
Spilled product would cause surfaces to become especially slippery. Take attention to prevent
package damaging.
It may be harmful to the skin, eyes, and respiratory system.
Protective equipment should be available when working. Washing with water after skin
contact. Flush open eyes for several minutes under running water. If necessary, seek medical
advice.
94
Tertiary Oil Recovery Chemicals
Tertiary Oil Recovery Chemicals: Polyacrylamide
Polyacrylamide
【Product Name】
Product Name :Polyacrylamide
【Molecular formula】
molecular formula:(C3H5NO)n
【Performance Features】
1. Work as an excellent flocculant and viscosifier.
2. Good water solubility, easily disperses in water
3. Hi-temperature-resistance, salt-resistance and shearing-resistance.
4. Reduces water phase permeability in the formations effectively. Has the low adsorption to
the rock surface in the reservoirs.
【Quality Index】
Table 1
Anionic
Nonioni
Middle
to High
Items
Low degree of
High degree
c
degree
of
hydrolysis
of
Hydrolysis
hydrolysis
Molecular Weight (Million)≥
Solid content,% ≥
hydrolysis degree ,%
Dissolving velocity,h
≤
Content Water Insoluble % ≤
Residual monomer,% ≤
Items
600
88
≤5
1
0.2
0.05
1200
88
12--18
1
0.2
0.05
Table 2
Noni
onic
Low degree
of
hydrolysis
150
350
600
5
1600
88
22--28
2
0.2
0.05
Anionic
Middle to
High degree
of hydrolysis
200
400
1000
5
1600
88
≥30
2
0.2
0.05
High degree
of
Hydrolysis
200
400
1000
5
0.1% ≥
30
Apparent viscosity Conce
of distilled water
ntratio
0.25% ≥
80
（mPa•s）
n
0.5% ≥
180
granularity （≥1.00mm，≤0.15mm）%
5
【Application】
The product is mainly applied in the operation of Enhanced Oil Recovery. It has the functions
as the following: viscosity increasing, water loss reduction, rheological properties adjustment,
gelation, flow distribution, profile adjustment, and so on. It can enhance the oil recovery by
injecting polyacrylamide solution into the formation to improve the flow rate of oil and the water in
the operation of Enhanced Oil Recovery, and effectly increase the oil yield in tertiary oil recovery.
【Recommended Dosage】
fresh water mud: 0.1-0.3%; Saturated brine mud: 0.5-1%。
【Storage & Packaging】
The product should be stored in dry and ventilated warehouse. Please avoid direct sunlight and
rain. The guarantee period of the product is 2 years.
The product r is packed in complex paper bag outside and film plastic bag inside. The net
weight of the product is 25Kg ± 0.25Kg.
【Precautions】
Spilled product in contact with water or moisture causes surfaces to become especially
slippery. Take attention to prevent package damaging. As a powder, it may be harmful to the skin,
eyes, and respiratory system. Protective equipment should be available when working. Wash with
water after skin contact. Flush open eyes for several minutes under running water. If necessary, seek
medical advice.
95
Tertiary Oil Recovery Chemicals: Surfactants
DYD Type Surfactants for EOR
【Product Name】
Product Name：DYD Type Surfactants for EOR
Chemical Name: Dodecylbenzene sulfonic acid sodium salt and combination
【Molecular & Structural Formula】
Molecular Formula: C18H29NaO3S； CH3(CH2)11C6H4SO3Na
Structural Formula:
【Performance Features】
1、Alkaline free formula, solveing the problem of scaling, demulsifying and waste water
treatment of alkaline-surfactant-polymer flooding technology.
2、Using easily degradable, non toxic green surfactant, bringing no harm to the strata.
3、Compositional formulation with petroleum sulfonate creates synergy effects, ultra low
interface tension is achieved, enhancing the effect.
【Quality Index】
item
Solid Content(%)
Interface tension(mN/m)
pH Value(1% water solution)
data
≥50
≤5×10-3
7.0~10.5
Water Solubility (10% water Uniform solution, not laminating, no
solution)
precipitates
【Application】
Mainly used in the binary combination flooding technology for tertiary oil recovery.
【Recommended Dosage】
Reference Dosage：0.1~0.3%
【Storage & Packaging】
Packaged in stainless steel drums.
【Precautions】
Designed for the sole purpose of the binary combination flooding technology for tertiary oil
recovery. Other application prohibited.
Operators shall always wear necessary protections.
Keep air tight and prevent any leakage all the time during storage and transportation. Keep
away from flames.
96
Tertiary Oil Recovery Chemicals: Petroleum Sulfonate
Petroleum Sulfonate
【Product Name】
Product Name: Petroleum Sulfonate
【Molecular & Structural Formula】
Molecular Formula: C23H38SO3M 或 C31H48SO3M
【Performance Features】
1. Good water solubility and salt resistance.
2. Remarkably lower the oil-water interface tension.
3. Lower the water content of the oil well production stream.
4. Increase crude oil recovery rate.
【Quality Index】
Item
Data
Appearance
Brown thick and viscous liquid
pH Value
7.0-9.0
Active content
≥32.0％
≤28.0％
Unsulfonated oil content
Inorganic salt content ％
≤9.0％
Water solubility, min
≤10
Interface tension, mN/m
≤5.0×10-2
Calcium and Magnesium resistance,
mN/m
≤7.0×10-2
【Application】
Petroleum Sulfonate is an anion surfactant using petroleum cut or crude oilasrawmaterial. It
has good interface activity, crude oil compatibility, water solubility, and is a very effecitve
oil-displacing agent in tertiary oil recovery.
【Storage & Packaging】
To be stored in a cool and well ventilated warehouse. Avoid direct sun light and rain.
【Precausions】
Operators shall always wear necessary protections. Keep air tight and Avoid any leakage all
the time during storage and transportion. Keep away from flames.
97