HAMID GARMESTANI
School of Materials Science and Engineering
Georgia Institute of Technology
Atlanta, GA 30332-0245
404 385 4495
garm@gatech.edu
PROFESSIONAL EDUCATION:
University of Florida
Mechanical Engineering
B.S. 1977-1981
University of Florida,
Materials Science and Engineering
MS. 1984
Minor: Engineering Sciences and Mechanics.
Advisor: Professor E. W. Hart
Cornell University
Theoretical and Applied Mechanics, Ph.D.1989.
Materials Science and Engineering.
Advisor: Professor E. W. Hart
EMPLOYMENT:
2003-present
2000-2002
1995-2000
1990-1994
1988-1989
Minor:
Professor
Georgia Institute of Technology
Professor
Florida State University
Associate Professor
Florida State University
Assistant Professor:
Florida State University
Associate Research Scientist
Yale University
RESEARCH INTEREST:
Prof. Hamid Garmestani, faculty since 1991, is a Professor of Materials Science and
Engineering at Georgia Institute of Technology. Dr. Garmestani is well known for
Microstructure Sensitive Design (MSD) framework that addresses an inverse
methodology and innovations in various aspects of processing, structure-property
relationships, and simulation-based design of materials. He has contributed years of
work to statistical continuum mechanics for homogenization in composites and
polycrystalline materials. He has published more than 250 papers (165 Journal
papers) with more than 2610 citations with an H factor of 22. Through this work he
has been able to contribute and significantly affect some cutting edge areas of
research and development. His research in Microstructure Design of Ultra High
Molecular Weight Polyethylene resulted in microstructures with significantly higher
wear resistant properties for bio-implant (Knee and Hip) applications. This was
achieved using a computational materials framework that can explore the optimum
processing path conditions (heat treatment and warm rolling to produce highly
deformed microstructures for extended plasticity. He has recently been involved in
Microstructure design of porous ceramic cathode materials resulted in the
development and synthesis of porous gradient LSMO cathode microstructures for
Solid Oxide Fuel Cell (SOFC). The theoretical modeling using statistical approaches
provided a framework to identify the gradient and the required porosity in the ceramic
structures. He and his team have also developed a synthesis methodology based on
spray pyrolysis to fabricate the optimum gradient microstructure. His efforts in the
microstructure design and processing of Carbon Based nano-tube composites has
just resulted in a microstructure with superior mechanical properties (patent pending).
Earlier in 2001, he has developed techniques in magnetic processing of Carbon
Based Nano-tube composites using Shear Drag in the polymer matrix to produce
highly oriented nano-tube composites using high magnetic field.
Dr. Garmestani has been heavily involved in leadership roles in both the American
Society of Mechanical Engineers Materials Division (Associate editor of ASME
JEMT). He is a member of the texture, forming and composite committees of ASM
and TMS. Dr. Garmestani has organized more than 26 workshops and symposia in
the emerging subject of materials design (average of 3 in the last four years), He was
awarded “Superstar in Research” by FSU-CRC in year 2000. He was also the
recipient of the 2000 Engineering Research Award of the FAMU-FSU College of
Engineering and recipient of the Faculty Award for Research from NASA. He is
presently funded through DOE, Pacific Northwest National lab, and the NSF. Dr.
Garmestani is a member of the editorial board of the Journal Engineering Materials
and Technology, International Journal of Plasticity, Journal of Mechanics of
Materials, Computers, Materials and Continua and Theoretical and Applied Multiscale Modeling of Materials.
PUBLICATIONS: Submitted (in review):
(Submitted, Accepted)
[1]
D. S. Li, Z. Y. Liu, H. Garmestani, and M. Al-Haik, "Fabrication of Unidirectional All
Cellulose Nanowhisker Composite. Polymer Bulletin," Submitted.
[2]
Z. Razavi Hesabi, S. Kamrani, J. Gracio, S. Ahzi, and H. Garmesatni,
"Contribution of sdifferent trengthening mechanisms in metal matrix
nanocomposites," Acta Materialia., submitted.
[3]
Z. Razavi Hesabi, K. Dahmen, H. Garmestani, and E. Olson, "Synthesis of carbon
nanobelt with self-assembly properties under magnetic field," submitted.
[4]
Z. Razavi Hesabi, N. K. Allam, K. Dahmen, H. Garmestani, and M. El-Sayed,
"Self-standing crystalline TiO2 nanotubes/CNTs heterojunction membrane:
Synthesis and characterization," Applied Materials and Interfaces,, Submitted.
[5]
Z. Razavi Hesabi, N. K. Allam, K. Dahmen, H. Garmestani, and M. El-Sayed,
"Enhanced photoassisted water splitting using crystalline Ti mixed oxide
nanotubes /CNTs hetro nanostrutures," Submitted.
[6]
P. Pooyan, R. Tannenbaum, and H. Garmestani, "Mechanical Behavior of an
Electrospun Cellulose-Reinforced Scaffold in Cardiovascular Tissue Engineering,"
Journal of the Mechanical Behavior of Biomedical Materials, submitted.
[7]
P. Pooyan, I. T. Kim, R. Tannenbaum, and G. H., "Cellulose-based
Nanocomposite as a Potential Scaffold in Cardiovascular Tissue Engineering,"
Submitted.
[8]
H. A. Hamedani, N. K. Allam, H. Garmestani, and M. A. El-Sayed, "Sr-Doped TiO2
Nanotube
Arrays:
Synthesis,
Characterization,
and
Enhanced
Photoelectrochemical Water Oxidation Characteristics," Journal of the Physical
Chemistry C, Submitted.
[9]
N. M. Hamdan, M. El-Elkawni, B. Z. Cui, and H. Garmestani, "Effect of High
Magnetic Field Annealing on Nd2.4Pr5.6Dy1Fe84Mo1B6
Nanocomposites: a
Circular Magnetic Dichrosim Study," journal of Mechanics of Advanced Materials &
Structures, Submitted.
(2012)
[10]
Z. R. Hesabi, K. A. Nageh, D. Klaus, H. Garmestani, and M. A. El-Sayed, "SelfStanding Crystalline TiO2 Nanotubes/CNTs Heterojunction Membrane: Synthesis
and Characterization," Applied Materials and Interfaces, 2012.
[11]
M. Baniassadi, B. Mortazavi, H. A. Hamedani, H. Garmestani, S. Ahzi, M. FathiTorbaghan, D. Ruch, and M. Khaleel, "Three-dimensional reconstruction and
homogenization of heterogeneous materials using statistical correlation functions
and FEM," Computational Materials Science, vol. 51, pp. 372-379, Jan 2012.
[12]
M. Baniassadi, A. Ghazavizadeh, Y. Remond, S. Ahzi, D. Ruch, and H.
Garmestani, "Qualitative Equivalence Between Electrical Percolation Threshold
and Effective Thermal Conductivity in Polymer/Carbon Nanocomposites," Journal
of Engineering Materials and Technology, vol. 134, pp. 010902-5, 2012.
[13]
M. Baniassadi, S. Ahzi, H. Garmestani, D. Ruch, and Y. Remond, "New
approximate solution for N-point correlation functions for heterogeneous
materials," Journal of the Mechanics and Physics of Solids, vol. 60, pp. 104-119,
Jan 2012.
[14]
M. Baniassadi, Mortazavi, B., Amani-Hamedani, H., Garmestani.H., Ahzi, S.,
Fathi, M., Ruch,D., Khaleel, M., "Three- dimensional reconstruction and
homogenization of heterogeneous materials using statistical Correlation function,"
Computational Materials Science, vol. 51, pp. 372-379, 2012 2012.
[15]
M. Baniasadi, A. Ghazavizadeh, Y. Rémond, A. Ahzi, D. Ruch, and H. Garmestani,
"Qualitative Equivalence Between Electrical Percolation Threshold and Effective
Thermal Conductivity in Polymer/Carbon Nanocomposites," J. Eng. Mater.
Technol., vol. 134, 2012.
(2011)
[16]
W. Miranda, G. Takiguchi, T. Shimabukuro, L. McLennan, C. Agajanian, L.
Quintero, D. Mismar, J. Abdulla, C. Andrews, M. Hahn, E. Fodran, E. W. Lee, H.
Garmestani, R. D. Conner, D. Brick, J. Ogren, and O. S. Es-Said, "Innovative
Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled,
Hydraulic Tubing," Journal of Materials Engineering and Performance, vol. 20, pp.
1206–121, 2011.
[17]
J. Milhans, D. S. Li, M. Khaleel, X. Sun, and H. Garmestani, "Prediction of the
effective coefficient of thermal expansion of heterogeneous media using two-point
correlation functions," Journal of Power Sources, vol. 196, pp. 3846-3850, Apr
2011.
[18]
J. Milhans, D. S. Li, M. Khaleel, X. Sun, M. Al-Haik, A. Harris, and H. Garmestani,
"Mechanical properties of solid oxide fuel cell glass-ceramic seal at high
temperatures," Journal of Power Sources, vol. 196, pp. 5599–5603, 2011.
[19]
D. S. Li, H. Zbib, H. Garmestani, X. Sun, and M. Khaleel, "Modeling of irradiation
hardening of polycrystalline materials," Computational Materials Science, vol. 50,
pp. 2496–2501, 2011.
[20]
Z. R. Hesabi, N. Allam, K. Dahmen, H. Garmestani, and M. El-Sayed, "Enhanced
Photo-Assisted Water Splitting Using Titanium-Niobium Mixed Oxide
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
Nanotubes/CNTs Hybrid Electrodes , 2011 MRS Fall meeting & Exhibit, Nov. 28Dec 2, 2011, Hynes Convention Center, Boston, MA," 2011.
H. A. Hamedani, B. M., M. Khaleel, S. Ahzi, D. Ruch, and H. Garmestani,
"Microstructure, Property and Processing Relation in Gradient porous Cathode of
Solid Oxide Fuel Cells Using Statistical Continuum Mechanics," Journal of Power
Sources vol. 196, pp. 6325-6331, 2011.
H. A. Hamedani, N. K. Allam, H. Garmestani, and M. A. El-Sayed,
"Electrochemical Fabrication of Strontium-Doped TiONanotube Array Electrodes
and Investigation of Their Photoelectrochemical Properties," J. Physical
Chemistry, C, 2011.
A. Ghazavizadeh, M. Baniassadi, M. Safdari, A. A. Atai, S. Ahzi, S. A. Patlazhan,
J. Gracio, and D. Ruch, "Evaluating the Effect of Mechanical Loading on the
Electrical Percolation Threshold of Carbon Nanotube Reinforced Polymers: A 3D
Monte-Carlo Study," Journal of Computational and Theoretical Nanoscience, vol.
8, pp. 2087-2099, 2011.
J. Bouhattate, D. S. Li, G. A. C. Branco, C. M. B. Bacaltchuk, and H. Garmestani,
"Texture Prediction of Cold- and Hot-Rolled Titanium Using Processing Path
Model," Journal of Materials Engineering and Performance, vol. 20, pp. 177-184,
Mar 2011.
L. Baniassadi M, A., Makradi,A., Belouettar,S., Ruch,D., Muller,R., Garmestani,H.,
Toniazzo,V., Ahzi,S.,, "Statistical Continuum Theory for the Effective Conductivity
of Carbon nanotubes Filled Polymer Composites," Thermochimica Acta, vol. 520,
pp. 33-37, 2011.
M. Baniassadi, M. Safdari, A. Ghazavizadeh, B. Mortazavi, H. Garmestani, S.
Ahzi, J. Grácio, and D. Ruch, "Incorporation of Electron Tunneling Phenomenon
into 3D Monte Carlo Simulation of Electrical Percolation in Graphite Nanoplatelet
Composites," Journal of Physics D: Applied Physics, vol. 44, pp. 1-8, 2011.
M. Baniassadi, A. Laachachi, F. Hassouna, F. Addiego, R. Muller, H. Garmestani,
S. Ahzi, V. Toniazzo, and D. Ruch, "Mechanical and thermal behavior of nanoclay
based polymer nanocomposites using statistical homogenization approach,"
Composites Science and Technology, vol. 71, pp. 1930-1935, Nov 14 2011.
M. Baniassadi, H. Garmestani, D. S. Li, S. Ahzi, M. Khaleel, and X. Sun, "Threephase solid oxide fuel cell anode microstructure realization using two-point
correlation functions," Acta Materialia, vol. 59, pp. 30-43, Jan 2011.
M. Baniassadi, F. Addiego, A. Laachachi, S. Ahzi, H. Garmestani, F. Hassouna, A.
Makradi, V. Toniazzo, and D. Ruch, "Using SAXS approach to estimate thermal
conductivity of polystyrene/zirconia nanocomposite by exploiting strong contrast
technique," Acta Materialia, vol. In Press, Corrected Proof, 2011.
(2010)
[30]
M. Safdari, M. Baniassadi, S. Asiaei, H. Garmestani, and S. Ahzi, "Modeling of
Biologically Inspired Adhesive Pads Using Monte Carlo Analysis," Journal of
Adhesion Science and Technology, vol. 24, pp. 1207-1220, 2010.
[31]
J. Milhans, D. Li, M. Khaleel, X. Sun, and H. Garmestani, "Statistical continuum
mechanics analysis of effective elastic properties in solid oxide fuel cell glassceramic seal material," Journal of Power Sources, vol. 195, pp. 5726-5730, Sep
2010.
[32]
[33]
[34]
[35]
[36]
[37]
J. Milhans, M. Khaleel, X. Sun, M. Tehrani, M. Al-Haik, and H. Garmestani, "Creep
properties of solid oxide fuel cell glass-ceramic seal G18," Journal of Power
Sources, vol. 195, pp. 3631-3635, Jun 2010.
A. Mikdam, A. Makradi, S. Ahzi, H. Garmestani, D. S. Li, and Y. Remond,
"Statistical continuum theory for the effective conductivity of fiber filled polymer
composites: Effect of orientation distribution and aspect ratio," Composites
Science and Technology, vol. 70, pp. 510-517, Mar 2010.
D. S. Li, Z. Y. Liu, M. Al-Haik, M. Tehrani, F. Murray, R. Tannenbaum, and H.
Garmestani, "Magnetic alignment of cellulose nanowhiskers in an all-cellulose
composite," Polymer Bulletin, vol. 65, pp. 635-642, Sep 2010.
D. S. Li, M. Khaleel, X. Sun, and H. Garmestani, "Representation of correlation
statistics functions in heterogeneous materials using layered fast spherical
harmonics expansion," Computational Materials Science, vol. 48, pp. 133-139,
Mar 2010.
D. S. Li, M. Baniassadi, H. Garmestani, S. Ahzi, M. M. R. Taha, and D. Ruch, "3D
Reconstruction of Carbon Nanotube Composite Microstructure Using Correlation
Functions," Journal of Computational and Theoretical Nanoscience, vol. 7, pp.
1462-1468, Aug 2010.
M. Baniassadi, A. Ghazavizadeh, M. Safdari, H. Garmestani, and S. Ahzi, "Effect
of mechanical deformation on electrical percolation of CNT polymer composites,"
in ASME International Mechanical Engineering Congress and Exposition,
Proceedings, 2010, pp. 893-897.
(2009)
[38]
G. Vialle, M. Di Prima, E. Hocking, K. Gall, H. Garmestani, T. Sanderson, and S.
C. Arzberger, "Remote activation of nanomagnetite reinforced shape memory
polymer foam," Smart Materials & Structures, vol. 18, Nov 2009.
[39]
J. Milhans, S. Ahzi, H. Garmestani, M. A. Khaleel, X. Sun, and B. J. Koeppel,
"Modeling of the effective elastic and thermal properties of glass-ceramic solid
oxide fuel cell seal materials," Materials & Design, vol. 30, pp. 1667-1673, May
2009.
[40]
A. Mikdam, A. Makradi, S. Ahzi, H. Garmestani, D. S. Li, and Y. Remond,
"Effective conductivity in isotropic heterogeneous media using a strong-contrast
statistical continuum theory," Journal of the Mechanics and Physics of Solids, vol.
57, pp. 74-86, Jan 2009.
[41]
A. Mikdam, A. Makradi, S. Ahzi, H. Garmestani, D. S. Li, and Y. Remond, "A new
approximation for the three-point probability function," International journal of
solids and structures, vol. 46, pp. 3782-3787, Oct 2009.
[42]
S. M'Guil, S. Ahzi, H. Youssef, M. Baniassadi, and J. J. Gracio, "A comparison of
viscoplastic intermediate approaches for deformation texture evolution in facecentered cubic polycrystals," Acta Materialia, vol. 57, pp. 2496-2508, May 2009.
[43]
D. S. Li, H. Garmestani, and J. Schwartz, "Modeling thermal conductivity in UO2
with BeO additions as a function of microstructure," Journal of Nuclear Materials,
vol. 392, pp. 22-27, Jul 2009.
[44]
D. S. Li, H. Garmestani, S. Ahzi, M. Khaleel, and D. Ruch, "Microstructure Design
to Improve Wear Resistance in Bioimplant UHMWPE Materials," Journal of
Engineering Materials and Technology-Transactions of the Asme, vol. 131, Oct
2009.
[45]
[46]
[47]
[48]
[49]
O. Hatamleh, P. M. Singh, and H. Garmestani, "Corrosion susceptibility of peened
friction stir welded 7075 aluminum alloy joints," Corrosion Science, vol. 51, pp.
135-143, Jan 2009.
O. Hatamleh, P. M. Singh, and H. Garmestani, "Stress Corrosion Cracking
Behavior of Peened Friction Stir Welded 2195 Aluminum Alloy Joints," Journal of
Materials Engineering and Performance, vol. 18, pp. 406-413, Jun 2009.
H. Garmestani, M. Baniassadi, D. S. Li, M. Fathi, and S. Ahzi, "Semi-inverse
Monte Carlo reconstruction of two-phase heterogeneous material using two-point
functions," International Journal of Theoretical and Applied Multiscale Mechanics,
vol. 1, pp. 134-149, 2009.
H. Garmestani, Baniassadi, M., Li, D.S., Fathi, M., Ahzi, S., "Semi-inverse Monte
Carlo reconstruction of two-phase heterogeneous material using two-point
functions," International Journal of Theoretical and Applied Multiscale Mechanics,
vol. 1, pp. 134-149, 2009.
A. Belvin, R. Burrell, A. Gokhale, N. Thadhani, and H. Garmestani, "Application of
two-point probability distribution functions to predict properties of heterogeneous
two-phase materials," Materials Characterization, vol. 60, pp. 1055-1062, Sep
2009.
(2008)
[50]
M. K. Singh, T. Shokuhfar, J. J. D. Gracio, A. C. M. de Sousa, J. M. D. Fereira, H.
Garmestani, and S. Ahzi, "Hydroxyapatite modified with carbon-nanotubereinforced poly(methyl methacrylate): A nanocomposite material for biomedical
applications," Advanced Functional Materials, vol. 18, pp. 694-700, Mar 2008.
[51]
A. Sheikh-Ali and H. Garmestani, "Changes in microhardness of cold rolled metals
induced by annealing in ultra-high magnetic field," Materials Letters, vol. to be
published, 2008.
[52]
G. Saheli, H. Garmestani, and A. Gokhale, "Homogenization relations for elastic
properties of two-phase composites using two-point statistical functions," Journal
of Mechanics of Materials and Structures, vol. 3, pp. 85-106, Jan 2008.
[53]
D. S. Li, A. D. Rollett, G. Vialle, and H. Garmestani, "Multiproperty microstructure
and property design of magnetic materials," Journal of Engineering Materials and
Technology-Transactions of the Asme, vol. 130, Apr 2008.
[54]
D. S. Li, H. Garmestani, A. O. Chu, H. Ahzi, G. Alapati, M. Khatonabadi, O. EsSaid, M. T. Siniawski, L. Matrisciano, and S. Ahzi, "Wear resistance and
microstructure in annealed ultra high molecular weight polyethylenes," Polymer
Science Series A, vol. 50, pp. 533-537, May 2008.
[55]
H. A. Hamedani, K. H. Dahmen, D. Li, H. Peydaye-Saheli, H. Garmestani, and M.
Khaleel, "Fabrication of gradient porous LSM cathode by optimizing deposition
parameters in ultrasonic spray pyrolysis," Materials Science and Engineering BAdvanced Functional Solid-State Materials, vol. 153, pp. 1-9, Sep 2008.
[56]
E. Camponeschi, J. Walker, H. Garmestani, and R. Tannenbaum, "Surfactant
effects on the particle size of iron (III) oxides formed by sol-gel synthesis," Journal
of Non-Crystalline Solids, vol. 354, pp. 4063-4069, Sep 2008.
(2007)
[57]
[58]
[59]
[60]
A. D. Sheikh-Ali and H. Garmestani, "Evolution of surface and bulk textures during
superplastic deformation in a zinc alloy," MATERIALS LETTERS, vol. 61, pp. 478481, Jan 2007.
D. S. Li, H. Garmestani, and S. Ahzi, "Processing path optimization to achieve
desired texture in polycrystalline materials," Acta Materialia, vol. 55, pp. 647-654,
Jan 2007.
D. Li and D. Garmestani, "Microstructure Sensitive Design and Quantitative
Prediction of Effective Conductivity in Fuel Cell Design," in The 13th International
Symposium on Plasticity and Its Current Applications, Alaska., 2007.
E. Camponeschi, R. Vance, M. Al-Haik, H. Garmestani, and R. Tannenbaum,
"Properties of carbon nanotube-polymer composites aligned in a magnetic field,"
Carbon, vol. 45, pp. 2037-2046, Sep 2007.
(Previous Years)
[61]
S. S. Yan, H. Garmestani, Y. F. Tian, S. J. Hu, R. W. Gao, Y. X. Chen, G. L. Liu,
and L. M. Mei, "Free boundary domain wall pinning model for the magnetization
reversal in magnetic thin films," Japanese Journal Of Applied Physics Part 1Regular Papers Brief Communications & Review Papers, vol. 45, pp. 93-98, Jan
2006.
[62]
S. S. Yan, H. Garmestani, Y. F. Tian, and e. al., "Free boundary domain wall
pinning model for the magnetization reversal in magnetic thin films," Japanese
Journal Of Applied Physics Part 1-Regular Papers Brief Communications &
Review Papers vol. 45, pp. 93-98 2006.
[63]
A. D. Sheikh-Ali, D. A. Molodov, and H. Garmestani, "Thermomagnetic treatment
of zinc: Selective grain growth and texture modification," Reviews on Advanced
Materials Science, vol. 11, pp. 167-173, Apr 2006.
[64]
S. S. Park, H. Garmestani, G. T. Bae, N. J. Kim, P. E. Krajewski, S. Kim, and E.
W. Lee, "Constitutive analysis on the superplastic deformation of warm-rolled 6013
Al alloy," Materials Science and Engineering a-Structural Materials Properties
Microstructure and Processing, vol. 435, pp. 687-692, Nov 2006.
[65]
D. S. Li, G. Saheli, M. Khaleel, and H. Garmestani, "Microstructure optimization in
fuel cell electrodes using materials design," CMC-COMPUTERS MATERIALS &
CONTINUA, vol. 4, pp. 31-42, Aug 2006.
[66]
D. S. Li, G. Saheli, M. Khaleel, and H. Garmestani, "Quantitative prediction of
effective conductivity in anisotropic heterogeneous media using two-point
correlation functions," Computational Materials Science, vol. 38, pp. 45-50, Nov
2006.
[67]
F. Johnson, C. Y. Um, M. E. McHenry, and H. Garmestani, "The influence of
composition and field annealing on magnetic properties of FeCo-based
amorphous and nanocrystalline alloys," Journal of Magnetism and Magnetic
Materials, vol. 297, pp. 93-98, Feb 2006.
[68]
I. C. Dragomir, G. A. Castello-Branco, G. Ribarik, H. Garmestani, T. Ungar, and R.
L. Snyder, "Burgers Vector Populations in hot rolled titanium determined by X-ray
Peak Profile Analysis," Zeitschrift fur Kristallographie, pp. 99-104, 2006.
[69]
B. Z. Cui, K. Han, D. S. Li, H. Garmestani, J. P. Liu, N. M. Dempsey, and H. J.
Schneider-Muntau, "Magnetic-field-induced crystallographic texture enhancement
in cold-deformed FePt nanostructured magnets," Journal of Applied Physics, vol.
100, Jul 2006.
[70]
[71]
[72]
[73]
[74]
B. Z. Cui, K. Han, H. Garmestani, and H. J. Schneider-Muntau, "Structure and
magnetic properties of FePt and FePt-Ag nanostructured magnets by cyclic cold
rolling," Journal of Applied Physics, vol. 99, Apr 2006.
E. Camponeschi, B. Florkowski, R. Vance, G. Garrett, H. Garmestani, and R.
Tannenbaum, "Uniform directional alignment of single-walled carbon nanotubes in.
viscous polymer flow," Langmuir, vol. 22, pp. 1858-1862, Feb 2006.
M. S. Al-Haik, M. Y. Hussaini, and H. Garmestani, "Prediction of nonlinear
viscoelastic behavior of polymeric composites using an artificial neural network,"
International Journal of Plasticity, vol. 22, pp. 1367-1392, 2006.
M. Zubris, R. B. King, H. Garmestani, and R. Tannenbaum, "FeCo nanoalloy
formation by decomposition of their carbonyl precursors," Journal of Materials
Chemistry, vol. 15, pp. 1277-1285, 2005.
G. Saheli, H. Garmestani, and A. Gokhale, "Effective Elastic Properties of an AlSiC Composite Using Two-point Statistical Mechanics Approach," International
Journal of Physics and Mechanics of Solids
, 2005.
[75]
G. Saheli, H. Garmestani, and B. L. Adams, "Microstructure design of a two phase
composite using two-point correlation functions," Journal of Computer-Aided
Design, vol. 11, pp. 103 – 115, 2005.
[76]
D. S. Li, H. Garmestani, and B. L. Adams, "A texture evolution model in cubicorthotropic polycrystalline system," International Journal of Plasticity, vol. 21, pp.
1591-1617, 2005.
[77]
D. S. Li, H. Garmestani, and B. L. Adams, "A Processing Model for Texture
Evolution in Cubic-Orthotropic Polycrystalline System " International Journal of
Plasticity, vol. 21, pp. 1591–1617, 2005.
[78]
D. S. Li, J. Bouhattate, and H. Garmestani, "Processing path model to describe
texture evolution during mechanical processing," in Icotom 14: Textures of
Materials, Pts 1and 2. vol. 495-497, P. V. Houtte and L. Kestens, Eds., ed, 2005,
pp. 977-982.
[79]
G. Jefferson, H. Garmestani, R. Tannenbaum, A. Gokhale, and E. Tadd, "Twopoint probability distribution function analysis of Co-polymer nano-composites,"
International Journal of Plasticity, vol. 21, pp. 185-198, 2005.
[80]
A. M. Gokhale, A. Tewari, and H. Garmestani, "Constraints on microstructural twopoint correlation functions," SCRIPTA MATERIALIA, vol. 53, pp. 989-993, Oct
2005.
[81]
I. C. Dragomir, D. S. Li, G. A. Castello-Branco, H. Garmestani, R. L. Snyder, G.
Ribarik, and T. Ungar, "Evolution of dislocation density and character in hot rolled
titanium determined by X-ray diffraction," Materials Characterization, vol. 55, pp.
66-74, Jul 2005.
[82]
I. C. Dragomir, G. A. Castello-Branco, G. Ribarik, H. Garmestani, T. Ungar, and R.
L. Snyder, "Burgers Vector Populations in hot rolled titanium determined by X-ray
Peak Profile Analysis," Zeitschrift fur Kristallographie 2005.
[83]
B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, and H. J.
Schneider-Muntau, "Magnetization reversal and nanostructure refinement in
magnetically annealed Nd2Fe14B/alpha-Fe-type nanocomposites," Journal of
Applied Physics, vol. 97, May 2005.
[84]
B. Z. Cui, K. Han, H. Garmestani, J. H. Su, H. J. Schneider-Muntau, and J. P. Liu,
"Enhancement of exchange coupling and hard magnetic properties in
nanocomposites by magnetic annealing," Acta Materialia, vol. 53, pp. 4155-4161,
Sep 2005.
[85]
J. Bouhattate, D. Li, H. Garmestani, S. Ahzi, and M. Khaleel, "On improving
predictions
of
texture
evolution
using
processing
path
model,"
Materialwissenschaft Und Werkstofftechnik, vol. 36, pp. 538-540, Oct 2005.
[86]
C. M. B. Bacaltchuk, G. A. Castello-Branco, and H. Garmestani, "Magnetic field
effect on the microstructure of low silicon steel," in Icotom 14: Textures of
Materials, Pts 1and 2. vol. 495-497, P. V. Houtte and L. Kestens, Eds., ed, 2005,
pp. 1165-1170.
[87]
C. M. B. Bacaltchuk, G. A. C. Branco, H. Garmestani, C. Iskandar, P. Koo, A.
Kasseh, R. Abourialy, J. Ogren, and O. S. E-Said, "High magnetic field effect on
texture and grain growth of GNO silicon steel," Materialwissenschaft Und
Werkstofftechnik, vol. 36, pp. 561-565, Oct 2005.
[88]
M. Al-Haik, M. Y. Hussaini, and H. Garmestani, "Adhesion energy in carbon
nanotube-polyethylene composite: Effect of chirality," Journal of Applied Physics,
vol. 97, Apr 2005.
[89]
S. S. Yan, C. Ren, X. Wang, Y. Xin, Z. X. Zhou, L. M. Mei, M. J. Ren, Y. X. Chen,
Y. H. Liu, and H. Garmestani, "Ferromagnetism and magnetoresistance of Co-ZnO
inhomogeneous magnetic semiconductors," Applied Physics Letters, vol. 84, pp.
2376-2378, Mar 2004.
[90]
G. Saheli, H. Garmestani, and B. L. Adams, "Microstructure design of a two phase
composite using two-point correlation functions," Journal of Computer-Aided
Materials Design, vol. 11, pp. 103-115, 2004.
[91]
L. Meda, K. H. Dahmen, S. Hayek, and H. Garmestani, "X-ray diffraction residual
stress calculation on textured La2/3Sr1/3MnO3 thin film," Journal of Crystal
Growth, vol. 263, pp. 185-191, Mar 2004.
[92]
D. S. Li, H. Garmestani, S. S. Yan, M. Elkawni, M. B. Bacaltchuk, H. J. SchneiderMuntau, J. P. Liu, S. Saha, and J. A. Barnard, "Effects of high magnetic field
annealing on texture and magnetic properties of FePd," Journal of Magnetism and
Magnetic Materials, vol. 281, pp. 272-275, Oct 2004.
[93]
F. Johnson, H. Garmestani, S. Y. Chu, M. E. McHenry, and D. E. Laughlin,
"Induced anisotropy in FeCo-based nanocrystalline ferromagnetic alloys
(HITPERM) by very high field annealing," IEEE Transactions on Magnetics, vol.
40, pp. 2697-2699, Jul 2004.
[94]
C. M. B. Bacaltchuk, G. A. Castello-Branco, H. Garmestani, and A. D. Rollett,
"Effect of magnetic field during secondary annealing on texture and microstructure
of nonoriented silicon steel," Materials and Manufacturing Processes, vol. 19, pp.
611-617, 2004.
[95]
M. S. Al-Haik, H. Garmestani, and A. Savran, "Explicit and implicit viscoplastic
models for polymeric composite," International Journal of Plasticity, vol. 20, pp.
1875-1907, 2004.
[96]
M. S. Al-Haik, H. Garmestani, D. S. Li, M. Y. Hussaini, S. S. Sablin, R.
Tannenbaum, and K. Dahmen, "Mechanical properties of magnetically oriented
epoxy," Journal of Polymer Science Part B-Polymer Physics, vol. 42, pp. 15861600, May 2004.
[97]
M. S. Al-Haik and H. Garmestani, "A. Savran Explicit and Implicit Viscoplastic
Models for Polymeric Composite
," International Journal of Plasticity vol. 20, pp. 1875–1907, 2004.
[98]
[99]
[100]
[101]
[102]
[103]
[104]
[105]
[106]
[107]
[108]
[109]
[110]
[111]
[112]
S. S. Yan, M. Elkawni, D. S. Li, H. Garmestani, J. P. Liu, J. L. Weston, and G.
Zangari, "Soft/hard exchange-coupled layered structures with modulated
exchange coupling," Journal of Applied Physics, vol. 94, pp. 4535-4538, Oct 2003.
A. D. Sheikh-Ali, J. A. Szpunar, and H. Garmestani, "Stimulation and suppression
of grain boundary sliding by intragranular slip in zinc bicrystals," Interface Science,
vol. 11, pp. 439-450, Oct 2003.
A. D. Sheikh-Ali, D. A. Molodov, and H. Garmestani, "Migration and reorientation
of grain boundaries in Zn bicrystals during annealing in a high magnetic field,"
SCRIPTA MATERIALIA, vol. 48, pp. 483-488, Mar 2003.
A. D. Sheikh-Ali, D. A. Molodov, and H. Garmestani, "Boundary migration in Zn
bicrystal induced by a high magnetic field," Applied Physics Letters, vol. 82, pp.
3005-3007, May 2003.
A. D. Sheikh-Ali and H. Garmestani, "Assessment of contribution of intragranular
slip to grain boundary sliding in bicrystals," in Superplasticity in Advanced
Materials. vol. 447-4, R. I. Todd, Ed., ed, 2003, pp. 33-38.
D. S. Li, H. Garmestani, and S. Schoenfeld, "Evolution of crystal orientation
distribution coefficients during plastic deformation," SCRIPTA MATERIALIA, vol.
49, pp. 867-872, Nov 2003.
D. S. Li, H. Garmestani, R. G. Alamo, and S. R. Kalidindi, "The role of crystallinity
in the crystallographic texture evolution of polyethylenes during tensile
deformation," Polymer, vol. 44, pp. 5355-5367, Aug 2003.
D. S. Li, "Texture Evolution of Polyethylenes During Uniaxial Tension," Ph.D.,
Mechanical Engineering, Florida State University, Tallahassee, 2003.
M. Iskandar, D. Reyes, Y. Gaxiola, E. Fudge, J. Foyos, E. W. Lee, P. Kalu, H.
Garmestani, J. Ogren, and O. S. Es-Said, "On identifying the most critical step in
the sequence of heat treating operations in a 7249 aluminum alloy," Engineering
Failure Analysis, vol. 10, pp. 199-207, Apr 2003.
H. Garmestani, M. S. Al-Haik, K. Dahmen, R. Tannenbaum, D. S. Li, S. S. Sablin,
and M. Y. Hussaini, "Polymer-mediated alignment of carbon nanotubes under high
magnetic fields," Advanced Materials, vol. 15, pp. 1918-+, Nov 2003.
E. S. Choi, J. S. Brooks, D. L. Eaton, M. S. Al-Haik, M. Y. Hussaini, H.
Garmestani, D. Li, and K. Dahmen, "Enhancement of thermal and electrical
properties of carbon nanotube polymer composites by magnetic field processing,"
Journal of Applied Physics, vol. 94, pp. 6034-6039, Nov 2003.
G. A. Castello-Branco, C. M. B. Bacaltchuk, and H. Garmestani, "Effect of cold
rolling on the annealing texture of a near-alpha titanium," in Thermec'2003, Pts 15. vol. 426-4, T. Chandra, J. M. Torralba, and T. Sakai, Eds., ed, 2003, pp. 701706.
C. M. B. Bacaltchuk, G. A. Castello-Branco, B. Gault, and H. Garmestani, "Effect
of high magnetic field during primary annealing on texture of silicon steel," in
Thermec'2003, Pts 1-5. vol. 426-4, T. Chandra, J. M. Torralba, and T. Sakai, Eds.,
ed, 2003, pp. 3733-3738.
M. S. Al-Haik, H. Garmestani, and I. M. Navon, "Truncated-Newton training
algorithm for neurocomputational viscoplastic model," Computer Methods in
Applied Mechanics and Engineering, vol. 192, pp. 2249-2267, 2003.
M. L. Weaver, C. W. Calhoun, and H. Garmestani, "Microstructure, texture, and
mechanical properties of continuously cast gamma TiAl," Journal of Materials
Science, vol. 37, pp. 2483-2490, Jun 2002.
[113]
[114]
[115]
[116]
[117]
[118]
[119]
[120]
[121]
[122]
[123]
[124]
[125]
A. D. Sheikh-Ali, J. A. Szpunar, and H. Garmestani, "Grain Boundary Sliding
during Creep: Role of Boundary Misorientation and Strain Compatibility," Minerals,
Metals and Materials Society, pp. 127-136, 2002.
A. D. Sheikh-Ali, D. A. Molodov, and H. Garmestani, "Magnetically induced texture
development in zinc alloy sheet," SCRIPTA MATERIALIA, vol. 46, pp. 857-862,
Jun 2002.
A. D. Sheikh-Ali, D. A. Molodov, and H. Garmestani, "Texture development in Zn1.1%Al alloy under strong magnetic field," in Textures of Materials. vol. 408-4, D.
N. Lee, Ed., ed, 2002, pp. 955-960.
D. S. Li and H. Garmestani, "Texture evolution and stress evolution of
polyethylene during uniaxial extension," Abstracts of Papers of the American
Chemical Society, vol. 223, pp. 078-PMSE, Apr 2002.
M. Iskandar, D. Reyes, Y. Gaxiola, E. Fudge, J. Foyos, E. W. Lee, P. Kalu, H.
Garmestani, and O. S. Es-Said, "The effect of varying the solution treatment
temperature, natural aging treatment and artificial aging treatment on the
mechanical strength of 7249 aluminum alloy," in Aluminum Alloys 2002: Their
Physical and Mechanical Properties Pts 1-3. vol. 396-4, P. J. Gregson and S. J.
Harris, Eds., ed, 2002, pp. 1121-1126.
K. Han, A. Ishmaku, Y. Xin, H. Garmestani, V. J. Toplosky, R. Walsh, C. Swenson,
B. Lesch, H. Ledbetter, S. Kim, M. Hundley, and J. R. Sims, "Mechanical
properties of MP35N as a reinforcement material for pulsed magnets," IEEE
Transactions on Applied Superconductivity, vol. 12, pp. 1244-1247, Mar 2002.
H. Garmestani, S. R. Kalidindi, L. Williams, C. M. Bacaltchuk, C. Fountain, E. W.
Lee, and O. S. Es-Said, "Modeling the evolution of anisotropy in Al-Li alloys:
application to Al-Li 2090-T8E41," International Journal of Plasticity, vol. 18, pp.
1373-1393, 2002.
M. S. Al-Haik and H. Garmestani, "A composite cylinder model for the prediction of
residual stresses, in gamma-titanium composites," Journal of Materials
Engineering and Performance, vol. 11, pp. 530-536, Oct 2002.
B. L. Adams, M. Lyon, B. Henrie, S. R. Kalidindi, and H. Garmestani, "Spectral
integration of microstructure and design," in Textures of Materials, Pts 1 and 2. vol.
408-4, D. N. Lee, Ed., ed, 2002, pp. 487-492.
Y. Xin, K. Han, N. Mateeva, H. Garmestani, P. N. Kalu, and K. H. Dahmen,
"Microstructures of La(1-x)A(x)(A = Ca or Sr)MnO3-delta thin films by liquiddelivery metalorganic chemical vapor deposition," Journal of Materials Research,
vol. 16, pp. 3073-3083, Nov 2001.
M. R. Vaghar and H. Garmestani, "Three-dimensional axisymmetric stress
analysis of superconducting magnets using Green's function solution," Journal of
Applied Mechanics-Transactions of the Asme, vol. 68, pp. 11-18, Jan 2001.
A. D. Sheikh-Ali and H. Garmestani, "On the independent behavior of grain
boundary sliding and intragranular slip during superplasticity," in Superplasticity in
Advanced Materials, Icsam-2000. vol. 357-3, N. Chandra, Ed., ed, 2001, pp. 393398.
L. Meda, L. Kennon, C. Bacaltchuk, H. Garmestani, and K. H. Dahmen, "Effects of
thermal annealing on the texture of La0.67Sr0.33MnO3 thin films," Journal of
Materials Research, vol. 16, pp. 1887-1889, Jul 2001.
[126]
[127]
[128]
[129]
[130]
[131]
[132]
[133]
[134]
[135]
[136]
[137]
[138]
[139]
[140]
L. Meda, C. Bacaltchuk, H. Garmestani, and K. H. Dahmen, "Residual strain and
texture in strontium-doped lanthanum manganite thin films," Journal of Materials
Science-Materials in Electronics, vol. 12, pp. 143-146, 2001.
D. Li, H. Garmestani, S. R. Kalidindi, and R. Alamo, "Crystallographic texture
evolution in high-density polyethylene during uniaxial tension," Polymer, vol. 42,
pp. 4903-4913, May 2001.
H. Garmestani and M. A. Zikry, "Special issue on: "Inelastic Deformation and
Failure" in honor of Professor E.W. Hart on his 80th birthday - Editorial,"
International Journal of Plasticity, vol. 17, pp. 1303-1304, 2001.
H. Garmestani, M. R. Vaghar, and E. W. Hart, "A unified model for inelastic
deformation of polycrystalline materials - application to transient behavior in cyclic
loading and relaxation," International Journal of Plasticity, vol. 17, pp. 1367-1391,
2001.
H. Garmestani, S. Lin, B. L. Adams, and S. Ahzi, "Statistical continuum theory for
large plastic deformation of polycrystalline materials," Journal of the Mechanics
and Physics of Solids, vol. 49, pp. 589-607, Mar 2001.
H. Garmestani, M. Al-Haik, T. A. Townsley, and C. Sabinash, "Residual stress
development during fabrication and processing of gamma-titanium based
composites," SCRIPTA MATERIALIA, vol. 44, pp. 179-185, Jan 2001.
M. S. Al-Haik and H. Garmestani, "Durability study of a polymeric composite
material for structural applications," Polymer Composites, vol. 22, pp. 779-792,
Dec 2001.
M. Al-Haik, M. R. Vaghar, H. Garmestani, and M. Shahawy, "Viscoplastic analysis
of structural polymer composites using stress relaxation and creep data,"
Composites Part B-Engineering, vol. 32, pp. 165-170, 2001.
B. L. Adams, A. Henrie, B. Henrie, M. Lyon, S. R. Kalidindi, and H. Garmestani,
"Microstructure-sensitive design of a compliant beam," Journal of the Mechanics
and Physics of Solids, vol. 49, pp. 1639-1663, Aug 2001.
M. Trinca, A. Avalino, H. Garmestani, J. Foyos, E. W. Lee, and O. S. Es-Said,
"Effect of rolling orientation on the mechanical properties and crystallographic
texture of 2195 aluminum-lithium alloy," in Aluminium Alloys: Their Physical and
Mechanical Properties, Pts 1-3. vol. 331-3, E. A. Starke, T. H. Sanders, and W. A.
Cassada, Eds., ed, 2000, pp. 849-854.
A. D. Sheikh-Ali and H. Garmestani, "NHMFL Annual Research Review," The
National High Magnetic Field Laboratory, Tallahassee2000.
S. Lin, H. Garmestani, and B. Adams, "The evolution of probability functions in an
inelasticly deforming two-phase medium," International journal of solids and
structures, vol. 37, pp. 423-434, Jan 2000.
S. Lin and H. Garmestani, "Statistical continuum mechanics analysis of an elastic
two-isotropic-phase composite material," Composites Part B-Engineering, vol. 31,
pp. 39-46, 2000.
H. Garmestani, X. Dong, L. Brandao, and H. Dahmen, "Texture analysis in LDMOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials,"
Journal of Textures and Microstructures, vol. 34, pp. 65-74, 2000.
M. L. Weaver, L. P. M. Brandao, H. Garmestani, E. S. Gillman, K. H. Dahmen, and
A. Morrone, "Microcharacterization of liquid delivery metalorganic chemical vapor
deposition processed thin film materials exhibiting giant magnetoresistance,"
Journal of Materials Research, vol. 14, pp. 2007-2011, May 1999.
[141]
[142]
[143]
[144]
[145]
[146]
[147]
[148]
[149]
[150]
[151]
[152]
[153]
[154]
[155]
W. D. Markiewicz, M. R. Vaghar, I. R. Dixon, and H. Garmestani, "Generalized
plane strain analysis of superconducting solenoids," Journal of Applied Physics,
vol. 86, pp. 7039-7051, Dec 1999.
E. W. Lee, P. N. Kalu, L. Brandao, O. S. Es-Said, J. Foyos, and H. Garmestani,
"The effect of off-axis thermomechanical processing on the mechanical behavior
of textured 2095 Al-Li alloy," Materials Science and Engineering a-Structural
Materials Properties Microstructure and Processing, vol. 265, pp. 100-109, Jun
1999.
H. Garmestani and K. Harris, "Orientation determination by EBSP in an
environmental scanning electron microscope," SCRIPTA MATERIALIA, vol. 41,
pp. 47-53, Jun 1999.
F. Booeshaghi and H. Garmestani, "On the application of load relaxation in
characterizing superplastic Al-Li 8090," SCRIPTA MATERIALIA, vol. 40, pp. 509516, Jan 1999.
N. Bednar and H. Garmestani, "Biaxial testing of high strength carbon fiber
composite cylinders for pulsed magnet reinforcement," Composites Part a-Applied
Science and Manufacturing, vol. 30, pp. 147-152, 1999.
M. A. Zikry and H. Garmestani, "Special issue: Deformation and failure modes in
multiphase materials," International Journal of Plasticity, vol. 14, pp. 671-671,
1998.
M. L. Weaver and H. Garmestani, "Microstructures and mechanical properties of
commercial titanium foils processed via the melt overflow process," Materials
Science and Engineering a-Structural Materials Properties Microstructure and
Processing, vol. 247, pp. 229-238, Jun 1998.
K. E. Harris, F. Ebrahimi, and H. Garmestani, "Texture evolution in NiAl," Materials
Science and Engineering a-Structural Materials Properties Microstructure and
Processing, vol. 247, pp. 187-194, Jun 1998.
M. A. Z. H. Garmestani, "Deformation and failure modes in multiphase materials,"
International Journal of Plasticity, vol. 14, pp. 671-671 1998.
H. Garmestani, S. Lin, and B. L. Adams, "Statistical continuum theory for inelastic
behavior of a two-phase medium," International Journal of Plasticity, vol. 14, pp.
719-731, 1998.
H. Garmestani, P. Kalu, and D. Dingley, "Characterization of Al-8090 superplastic
materials using orientation imaging microscopy," Materials Science and
Engineering a-Structural Materials Properties Microstructure and Processing, vol.
242, pp. 284-291, Feb 1998.
J. Schwartz, B. C. Amm, H. Garmestani, D. K. Hilton, and Y. Hascicek,
"Mechanical properties and strain effects in Bi2Sr2CaCu2Ox/AgMg composite
conductors," IEEE Transactions on Applied Superconductivity, vol. 7, pp. 20382041, Jun 1997.
H. Garmestani, P. N. Kalu, and F. Booeshaghi, "Micromechanical investigation
and phenomenological modeling of Al-8090 superplastic materials," Materials
Science Forum, vol. 243-, pp. 569-574, 1997.
F. Booeshaghi and H. Garmestani, "On the existence of threshold stress,"
SCRIPTA MATERIALIA, vol. 38, pp. 89-94, Dec 1997.
M. R. Vaghar, H. Garmestani, and W. D. Markiewicz, "Elastoplastic stress analysis
of Nb3Sn superconducting magnet," Journal of Applied Physics, vol. 80, pp. 24902500, Aug 1996.
[156]
[157]
[158]
[159]
[160]
[161]
[162]
[163]
[164]
[165]
[166]
[167]
[168]
[169]
H. Garmestani, K. Harris, and P. Kalu, "Orientation Imaging Microscopy in
Environmental Scanning Electron Microscopy," Journal Scanninig Microscopies,
vol. 20, 1996.
A. W. Cox, H. Garmestani, W. D. Markiewicz, and I. R. Dixon, "Power series stress
analysis of solenoid magnets," IEEE Transactions on Magnetics, vol. 32, pp. 30123015, Jul 1996.
S. Mukherjee, H. Garmestani, and N. Chandra, "EXPERIMENTAL
INVESTIGATION OF THERMALLY-INDUCED PLASTIC-DEFORMATION IN
MMCS USING BACK SCATTERED KIKUCHI METHOD," Scripta Metallurgica et
Materialia, vol. 33, pp. 93-99, Jul 1995.
H. Garmestani, M. R. Vaghar, D. Markiewicz, and N. Chandra, "STRESSANALYSIS OF AN ORTHOTROPIC WORK-HARDENING CYLINDER WITH
BODY FORCE," Mechanics of Structures and Machines, vol. 23, pp. 521-548,
1995.
W. D. Markiewics, M. R. Vaghar, I. R. Dixon, and H. Garmestani, "Generalized
Plane Strain Analysis of Solenoid Magnets," IEEE Transactions on Magnetics, vol.
30, pp. 2233-2236, 1994.
H. Garmestani, R. Vaghar, and W. D. Markiewics, "Concepts of Plasticity in
Solenoid Stress Analysis," IEEE Transactions on Magnetics, vol. 30, pp. 22372240, 1994.
N. Chandra, K. Murali, and H. Garmestani, "Experimental and Numerical
Investigation of Superplastic Deformation Mechanisms," Material Science Forum,
vol. 170-172, pp. 47-52, 1994.
N. Chandra, C. R. Ananth, and H. Garmestani, "Micromechanical Modeling of
Process-Induced Residual Stresses in Ti-24Al-11Nb/SCS-6 Composite," Journal
of Composite Technology & Research, vol. 16, pp. 37-46, 1994.
E. W. Hart and H. Garmestani, "Mechanical Testing Using Direct Control of the
Inelastic Strain Rate," Journal of Experimental Mechanics, vol. 33, pp. 1-6, 1993.
C. R. Ananth, N. Chandra, and H. Garmestani, "Process Induced Residual
Stresses in Metallic/Intermetallic Matrix Composites," Computational Plasticity:
Fundamentals and Applications, pp. 2205-2216, 1992.
H. Garmestani and E. W. Hart, "Controlled Inelastic Strain Rate Experiments,"
JOM, J. Min. Met. Mat. Sci, vol. 40, 1988.
H. Garmestani and B. Adams, "Transient Small-Scale Yield Behavior of Textured
Copper Tubing Under Biaxial Loading," Journal of Engineering Materials and
Technology, vol. 108-2, pp. 127-134, 1986.
B. L. Adams, R. K. Raghavan, and H. Garmestani, "BIAXIAL SMALL STRAIN
YIELD BEHAVIOR IN SINGLE-PHASE METAL TUBES," Journal of Metals, vol.
36, pp. 60-60, 1984.
H. Garmestani and B. L. Adams, "INFLUENCE OF RECOVERY ANNEALING ON
BIAXIAL SMALL-SCALE YIELDING OF COPPER," Journal of Metals, vol. 35, pp.
A55-A55, 1983.
Books Published:
1. "Advances in Superplasticity and Superplastic Forming", Edited by N. Chandra, H.
Garmestani, R. E. Goforth, A TMS Publication, Proceedings of a Symposium
sponsored by the MDMD Shaping and Forming Committee, held at the TMS/ASM
Materials Week 2-5 November, 1992.
2. Deformation and failure modes in multiphase materials”, Zikry MA, Garmestani H,
Special issue: Int. J. Plasticity 14: (8) 671-671 1998
3. Special issue on: "Inelastic Deformation and Failure" in honor of Professor E.W.
Hart on his 80th birthday – Editorial, INT J PLASTICITY 17 (10): 1303-1304 2001.
Laboratory Manual:
"Experimental Methods in Solid Mechanics," H. Garmestani, Used for the junior level
course in experimental mechanics in the Dept. of Mechanical Engineering at
FAMU/FSU College of Engineering.
Proceedings:
(2011)
1. Zohreh Razavi Hesabi, Nageh Allam, Klaus Dahmen, Hamid Garmestani and
Mostafa El-Sayed,Enhanced Photo-Assisted Water Splitting Using TitaniumNiobium Mixed Oxide Nanotubes/CNTs Hybrid Electrodes , 2011 MRS Fall meeting
& Exhibit, Nov. 28-Dec 2, 2011, Hynes Convention Center, Boston, MA
2. Zohreh Razavi Hesabi, Nageh Allam, Hossein Sojoudi, Klaus Dahmen, Hamid
Garmestani and Mostafa Elsayed; TiO2 Nanotubes/CNTs/Graphene Heterojunction
Electrodes for Solar Energy-Driven Applications, 2011 MRS Fall meeting & Exhibit,
Nov. 28-Dec 2, 2011, Hynes Convention Center, Boston, MA
(2009)
3. Majid Baniassadi, Akbar Ghazavizadeh, Masoud Safdari, Hamid Garmestani, Said
AHZI, Effect of Mechanical Deformation on Electrical Percolation of CNT Polymer
Composites, Proceedings of the ASME 2009 International Mechanical
Engineering, Congress & Exposition IMECE2009, November 13-19, Lake Buena
Vista, Florida, USA
4. Effect of Low Field Magnetic Annealing on the Viscoelastic Behavior of a Structural
Epoxy, Mehran Tehrani, Marwan Al-Haik Hamid Garmestani, Dongsheng
Li,Proceedings of 2009 ASME International Mechanical Engineering Congress and
Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA
5. H. Garmestani, “Effect of Deformation History on Magnetic Processing of Materials”,
May 12, 2008, Presented to IMAP3 Tokeo, Japan,
6. Multiphysics Approach for the Behavior of Polymers and Polymer-based
Nanomaterials, Proceedings of third International Conferences on Polymer
Behavior, Nov 3-7, 2008, Marrakech, Morocco
7. Hoda Amani Hamedani, Klaus-Hermann Dahmen, Dongsheng Li, Hamid
Garmestani, Effect Of Spray Parameters On The Microstructure Of La1-Xsrxmno3
Cathode Prepared By Spray Pyrolysis, accepted for publication in 32nd international
conference & exposition on advanced ceramics & composites January 27–February
1, 2008, Daytona Beach, Florida USA
8. Microstructure Design Using Statistical Correlation Functions. Hamid Garmestani,
School of Mechanical and Materials Engineering, Georgia Institute of Technology,
presented to the First American Academy of Mechanics, New Orleans, June 17-20
(keynote talk);
9. Microstructure Design and Realization of Nanocomposite Structures, Hamid
Garmestani, 2nd International Joint Conference On Composite Engineering 8-11
July 2008, Vancouver Canada. (Keynote)
(2007)
1. Controlling Residual Stress in Metal Matrix Ceramic Fiber Composite Marwan S AlHaik, Hamid Garmestani, and Yousef Haik, Mater. Res. Soc. Symp. Proc. Vol. 977
© 2007 Materials Research Society 0977-FF03-03.
2. “Soft Magnet Multi Property Microstructure Design”, D. Li. H. Garmestani, G. Vialle,
The 13th International Symposium on Plasticity and Its Current Applications, June 26, 2007, Alaska,
3. “Microstructure Sensitive Design and Quantitative Prediction of Effective
Conductivity in Fuel Cell Design”, D. Li. H. Garmestani, The 13 th International
Symposium on Plasticity and Its Current Applications, June 2-6, 2007, Alaska.
4. Texture Prediction of cold and warm rolled Titanium using processing path model, J.
Bouhattate1, D.S. Li2, G. Castello-Branco3, H. Garmestani, Germany conference
on Knowledge management, July 3, 2007
5. H. Garmestani, D.S. Li, M.A. Khaleel. Microstructure sensitive design and
quantitative prediction of effective conductivity in fuel cell design. Proceedings of
PRICM6 (the sixth Pacific Rim International Conference on Advanced Materials and
Processing), 2007, 315-318.
6. Influence Functions for Fatigue Microcrack Driving Force as an Efficient Alternative
to Finite Element Analysis for Exploration of Microstructure-Property Relations within
Very High Cycle Fatigue Regime: Nima Salajegheh, David L. McDowell, Hamid
Garmestani, Rajesh Prasanna, Georgia Institute of Technology, USA, presented to
Fourth International Conference on Very High Cycle Fatigue August 19-22, 2007
(2006)
7. Microstructure and Mechanical Properties of Rolled Sheet and Forged Block
Gamma-Titanium Aluminides: Russell J. Foon; Julius De Rojas1; Sun Hyung Kim;
Nicole Sporer1; Richard Clark; John Ogren; Omar Es- Said; Kyle Mori; Elizabeth
Villalobos1; Hamid Garmestani; Dongsheng Li; Gopal Das; Titanium Alloys for High
Temperature Applications - A Symposium Dedicated to the Memory of Dr. Martin
Blackburn: Titanium Based Intermetallic Alloys for High Temperature Applications –
Gamma, 2006 TMS Annual Meeting, San Antonio, TX, March 14, 2006.
8. Processing Path Design and the Integration of Texture and Micro- Texture
Evolution: Hamid Garmestani Amiya Mukherjee Symposium on Processing and
Mechanical Response of Engineering Materials: Modeling of Material Behavior
Sponsored by: The Minerals, Metals and Materials Society, TMS Materials
Processing and Manufacturing Division, TMS Structural Materials Division,
TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Shaping and
Forming Committee, 2006 TMS Annual Meeting, San Antonio, TX, March 14, 2006
9. H. Garmestani, “Statistical Distribution Functions for Multi-Scale Design of
Materials”, Presented to University of Luxembourg and Henri Tudor Research
center, June 23rd, 2006.
10. H. Garmestani, “Statistical Correlation Functions as a Tool for Microstructural
Design”, Presented to Northwest Consortium for Multiscale Mathematics and
Applications Multiscale Modeling of Materials: Mathematics and Computation May
25-30, 2006. University of Puget Sound, Tacoma, WA.
(2005)
11. B. Z. Cui , K. Han , H. Garmestani , N. M. Dempsey , J. P. Liu , H. J. SchneiderMuntau, “Magnetic Properties of FePt and FePtAg Nanostructured Magnets by
Cyclic Cold Rolling”, 50th MMM Conference (10/30/05-11/03/05), San Jose,
California
12. C. M. B. Bacaltchuk, G. A. Castello-Branco, H. Garmestani, “High Magnetic Effects
on Texture of Grain-Non Oriented Silicon Steel”, Proceeding of the 1 st International
Conference on Diffusion in Solids and Liquids. DSL-2005, July 6-8, University of
Aveiro, Aveiro, Portugal.
13. H. Garmestani, D.S. Li, J. Bouhattate, S. Ahzi, and M. Khaleel, Processing Path
Model to Describe Texture Evolution During Mechanical Processing, Proceeding of
the ICOTOM 14, July 11-July 15, 2005, Leuven, Belgium.
14. C.M.B. Bacaltchuk, G.A. Castello-Branco1, H. Garmestani1, Magnetic Field effect
on the microstructure of low Silicon Steel, Proceeding of the ICOTOM 14, July 11July 15, 2005, Leuven, Belgium.
15. M. Iskandar, O. Essaid, et. Al. and H. Garmestani, “The Effect of Rolling Mode on
the Mechanical Strength and Crystallographic Texture of Rhenium Metal”
Proceeding of the 16th International Plansee Conference on Refractory Materials
(May 2005).
(2004)
16. G. Saheli, H. Garmestani, A. Gokhale, “Effective Elastic Properties of an Al-SiC
Composite Using Two-point Statistical Mechanics Approach”, The 8th International
Conference on Numerical Methods in Industrial Forming Processes NUMIFORM
2004, June 13-17, 2004, Ohio State University, US
17. B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, H. J. SchneiderMuntau Magnetization Reversal and Nanostructure Refinement in Magnetically
Annealed Nd2Fe14B/a-Fe-type Nanocomposites, accepted by the 49th MMM
Conference and will appear on JAP, 2005.
18. B. Z. Cui, k. Han , h. Garmestani , h. J. Schneider-muntau, j. H. Su, j. P. Liu,
enhancement of the material properties by magnetic field assisted phase
transformation, International Workshop on Materials Analysis and Processing in
Magnetic Fields Tallahassee, FL, March 2004, in press.
19. B. Z. Cui, K. Han, H. Garmestani, H. Schneider-Muntau, J. P. Liu, “Nanostructure,
Crystallographic Texture, Exchange Coupling, In-plan Magnetic Anisotropy and Hard
Magnetic Properties of Nd2Fe14B/a-Fe-type Nanocomposites Prepared by
Magnetic Annealing”, DARPA MetaMaterials PI Review (abstract), Colorado
Springs, CO, USA, August 4-7 (2003) Part II, p11.
20. B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, H. J. SchneiderMuntau Magnetization Reversal, Nanostructure Optimization and Magnetic Property
Enhancement in Magnetically Annealed Nd2Fe14B/-Fe-type Nanocomposites,
Proceeding of 2004 MMM conference.
(2003)
21. D.S. Li, H. Garmestani, “Processing Path of Crystal Orientation Coefficient during
Plastic Deformation”, Dislocations, Plasticity and Metal Forming, ISBN 0-9659463-47, Published by NEAT Press, 2003, 487-489.
22. G. Saheli, A. Belvin, H. Garmestani, and B. L. Adams, “Microstructure sensitive
design for a two-phase composite material”, PLASTICITY 2003, July 7-11, 2003,
Quebec City.
23. D.S. Li, H. Garmestani. A Linear Model of Processing Path in Cubic-Orthotropic
System. Multiscale modeling and characterization of elastic inelastic behavior of
engineering materials, Published by Kluwer, Eds: S. Ahzi et al., 2003, pp. 307-314
24. D.S. Li, H. Garmestani, “Prediction of Texture Coefficients Evolution During Bulk
Deformation”, Twelfth Symposium on Processing and Fabrication of Advanced
Materials, Oct. 2003.
25. D.S. Li, H. Garmestani. Modeling of Processing Path in Processing of Titanium.
Proceedings of International Light Metals Conference 2003.
26. H. Garmestani, G. Saheli, D. L. Li, “Microstructure Sensitive Design of Two Phase
composites”, 7th US National Congress on Computational Mechanics at
Albuquerque, New Mexico, July 27-31, 2003.
27. Frank Johnson,…Crystallization, Morphology and Magnetic Properties of Melt-spun
(Nd,Pr,Dy)₂(Fe,Co,Mo)₁₄B/[[alpha]] Fe Nanocomposites
ID: TMAG-03-10-0233, MMM conference, 2003
28. BauZhi,..Induced anisotropy in FeCo-based nanocrystalline ferromagnetic alloys
(HITPERM) by very high field annealing, ID: TMAG-03-10-0248, 2003
29. H. Garmestani, G. Saheli, G. A. Castello-Branco, Brent Adams - AIAA, 9th
AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta,
Georgia, September 4-6, 2003.
30. C. M. B. Bacaltchuk, G. A. Castello-Branco, M. Ebrahimi, H. Garmestani and A. D.
Rollett - 2003 TMS ANNUAL MEETING · San Diego, California , March 2003.
31. G.A.Castello-Branco, C.M.B.Bacaltchuk, H.Garmestani - Proceedings of the
THERMEC’2003 Conference – Madrid, Spain - July/03
32. G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld,
H.Garmestani - Proceedings of the TI-2003, 10th International Conference in
Titanium, Hamburg, Germany – July 2003
33. G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld,
H.Garmestani - 2003 MS&T '03: Materials Science & Technology, Symposium
Name: General Abstracts 2003, Chicago, Illinoys, November 2003
34. G.A.Castello-Branco, C.M.B.Bacaltchuk, J. C. Fanning, H.Garmestani- 2003 MS&T
'03: Materials Science & Technology 2003- Symposium:Processing and Properties
of Structural Materials,Chicago, Illinoys, November 2003
35. C.M.B.Bacaltchuk, G.A.Castello-Branco, H.Garmestani - 2003 MS&T '03: Materials
Science & Technology, Symposium: Processing-Structure-Property-Performance
Relationships,Chicago, Illinoys, November 2003
36. Arun Gokali, A. Tewari H. Garmestani, Utility of geometric constrains for modeling
two-point correlation functions, PLASTICITY 2003, Quebec City July 7-11
37. H. Garmestani A. Belvin, G. Saheli, H. Garmestani and B. L. Adams, Microstructure
sensitive design for a two-phase composite material, PLASTICITY 2003, Quebec
City July 7-11
38. (2002)
39. D. Li; H. Garmestani, “Influence of Branch Length on the Texture Evolution of Linear
Low Density Polyethylene”, Bulletin of America Physics Society, March meeting,
2002, 309
40. L. Zhu, A. J. Beaudoin, H. Garmestani and S. R. MacEwen “Stress Relaxation of a
Work-Hardened Aluminum Magnesium Alloy and application to Hart’s model” TMS
Annual Meeting, Columbus, Ohio, October 6-9th, 2002
41. S.S. Yan; M. Elkawni; D. Li; H. Garmestani etc, “Experimental and Theoretical study
on Soft/Hard Exchange-coupled NiFe/SmFe Bilayers”, DARPA MetaMaterials PI
Review, 2002, p22
42. “Statistical Mechanics Analysis of Heterogeneity”, Presented to IUTAM conference
in Morocco, October 20-24th, 2002, Marakesh, Morocco.
43. M.S. Al-Haik and H. Garmestani, G. Jefferson” Modeling of Process Induced
Residual Stress in Gamma Titanium Composite”, The Materials Information Society
(ASM) 11th International Symposium on Processing and Fabrication of Advanced
Materials, Materials Solutions Conference, Columbus Ohio, October 7-9 2002.
44. H. Garmestani, G. Saheli, G. Bronco, Optimization of microstructure in Ti-6Al-4V
using statistical continuum mechanics, Proceeding of the AIAA/ISSMO Symposium
and Exhibit on Multidisciplinary Analysis and Optimization, Grand Hyatt Atlanta,
Georgia, 4-6 September 2002.
45. G. Jefferson, H. Garmestani, B. L. Adams, Two point Distribution Functions and
application to Co-Copolymers, Proceeding of the Plasticity Conference in Aruba,
January 3-9, 2002.
46. H. Garmestani and B. L. Adams, Statistical continuum theory for characterization of
heterogeneity using strain energy, Proceeding of the Plasticity Conference in Aruba,
January 3-9, 2002.
47. H. Garmestani, M. Fathi, G. Saheli, "Statistical Continuum Approaches Based On
Parallel And Distributed Processing", The 2002 International Multi-conference in
Computer Science, June 24-27 2002, Las Vegas, Nevada, USA.
48. M.S. Al-Haik and H. Garmestani, ” Creep Prediction of Carbon Fiber/Epoxy
Composite Using Neural Network” WAC (World Automation Congress), Orlando FL,
June 9-13, 2002.
49. L. Zhu, A. J. Beaudoin, H. Garmestani and S. R. MacEwen “An Assessment of InService Stress Relaxation of a Work-Hardened Aluminum Magnesium Alloy” paper
for the NUMISHEET conference in Korea, 2002.
50. S. R. Kalidindi, B. L. Adams, and H. Garmestani, Process design to achieve
targeted microstructures, Proceeding of the Plasticity Conference in Aruba, January
3-9, 2002.
51. G. Jefferson, B. L. Adams, S. Lin, R. Tannenbaum and H. Garmestani, Two point
probability distribution functions: application to block co-polymer nanocomposites,
Proceeding of the Plasticity Conference in Aruba, January 3-9, 2002.
52. (2001)
53. D. Li; H. Garmestani, “Texture Evolution in Ethylene-Octene Copolymer during
Uniaxial Tension”, 50th Annual Denver X-ray Conference, Steamboat Springs,
Colorado, July 2001
54. D. Li, H Garmestani, S.R Kalidini, R. Alamo, “Texture Evolution and Morphology
Evolution in High Density Polyethylene during Uniaxial Tension”, Bulletin of America
Physics Society, March meeting, 2001, 203
55. B. L. Adams, S. R. Kalidindi and H. Garmestani, “Spectral Representation of
Microstructure Evolution in Polycrystals”, Proceeding of the TMS conference on
Microstructure Modeling and Prediction During Thermomechanical Processing,
Edited By: Raghavan Srinivasan, S. L. Semiatin, Armand Beaudoin, Steven Fox,
Zhe Jin, Held November 4-8, 2001, Indianapolis, Indiana.
56. H. Garmestani, “A Constitutive Model for Cyclic Loading and Relaxation”,
Proceeding of the ASME publication for constitutive modeling of advanced
materials, Orlando, Nov. 5-8, IMECE 2000 Dr. Marwan Khraisheh.
57. Garmestani, M.S. Al-Haik and S. Downey, ”Durability Analysis of an Autoclave
Structural Polymer Composite Using Stress Relaxation and Creep Data,” CANCOM
2001, Third Canadian International Composite Conference, Montréal (Quebec)
Canada, August 21-24 2001.
58. (2000)
59. L. Meda, H. Garmestani, …“Residual Stress in Thin Films of Strontium-Doped
Lanthanum Manganites” MRS, 2000 Spring Meeting, April 23-28, San Francisco,
CA.
60. H. Garmestani, s. Lin, b. L. Adams, “statistical continuum theory for characterization
of heterogeneity in an inelasticly deforming body” Proceeding of the Multi-scale
Modeling by Nasr Goneim, LosAngeles, 8/21/2000
61. H. Garmestani1, S. R. Kalidindi2, L. Williams1, E. W. Lee3, O. S. Es-Said “Evolution
of Anisotropy In Al-Li 2090-T8e41 Alloy”, Proceeding of the Plasticity 2000, Whistler,
Canada, July 15-24, 2000.
62. H. Garmestani, B. L. Adams, “Statistical Continuum Theory for Characterization of
Heterogeneity in an Inelastic Deforming Body”, Proceeding of ICCE/7 International
Committee on Composite Engineering, Denver, Co, July 2- June 8, 2000
63. M.S. Al-Haik and H. Garmestani, ” Implicit Creep Model of Polymer Matrix
Composites By Means Of Neural Network,” ICCE/7 Conference, Denver, Colorado,
July 2-8, 2000.
64. A.D. Sheikh-Ali, J.A. Szpunar and H. Garmestani, On the relationship between grain
boundary sliding and intragranular slip during superplastic deformation,
Superplasticity--Current Status and Future Potential (USA), Proceeding of MRS Fall
Meeting, November 29 - December 3, 1999, Boston, Massachussets,193-198, 2000
65. H. Garmestani, M. Al-Haik and S. Lin,” Statistical Continuum Mechanics
Representation of Material Heterogeneity Using Neural Networks,” WAC 2000
Conference, Maui, Hawaii June 11-16, 2000.
(1999)
66. H. Garmestani, S. Lin, “Statistical Continuum Theory for Inelastic Deformation of a
Polycrystalline Medium”, Proceeding of ICCE/6 International Committee on
Composite Engineering, Pullman, Washington, June 28-July3, 1999.
67. “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant
Magnetoresistant (LaM)MnO3 Materials”, K/ H. Dahmen, Nelly N. Mateeva, X. Dong,
L. Meta, H. Garmestani Proceeding of ICCE/6 International Committee on
Composite Engineering, June 28-July3, 1999.
68. M. Al-Haik, H. Garmestani, and T. A. Townsley, ” A Concentric Cylinder Model for
Residual Stress Prediction of High Temperature Titanium Aluminide Composite
Materials,” ICCE/6, 6th Annual International Conference on Composites
Engineering, Orlando Florida, June 27-July3 1999.
69. “Residual stress development during fabrication and processing of Gamma Titanium
based composites”, M. Al-Haik, T. A. Townsley, C. Sabinash, Proceeding of ICCE/6
International Committee on Composite Engineering, June 28-July3, 1999.
70. “A phenomenological model for superplastic materials”, H. Garmestani and F.
Booeshaghi, Proceedings of the Symposium on Superplasticity and Superplastic
Forming, M. A. Khalil, Editor, As part of SES 98 Annual Meeting in Pullman, Wa,
September 27-29, 1998.
71. H. Garmestani, Unified Modeling of Inelastic Deformation Including Strain
Transients in Cyclic Loading and Relaxation”, Presented at the special Symposium
to honor Hart’s 80th Birthday, Proceedings of SES 98 Annual Meeting in Pullman,
Wa, September 27-29, 1998.
72. Statistical Continuum Mechanics Analysis of Composite Materials, H. Garmestani,
S. Lin, B. Adams, Proceeding of the ICCE/5-International Committee on Composite
Engineering, July 5-11, 1998 in Las Vegas.
73. “Mechanical and Microscopy Analysis of Carbon Composites during high
Temperature Application”, Shahawy, H. Garmestani, C. Goins,
M. AlHaik,
Proceeding of the ICCE/5-International Committee on Composite Engineering, July
5-11, 1998 in Las Vegas
74. “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant
Magnetoresistant (LaM)MnO3 Materials”, M. Li, E. Gillman, K.-H. Dahmen, X.
Dong , L. Brandao, H. Garmestani, Proceeding of the ICCE/5-International
Committee on Composite Engineering, July 5-11, 1998 in Las Vegas.
75. “A Phenomenological Model For Aluminum Based Superplastic Materials”, H.
Garmestani and F. Booeshaghi Proceedings of the International Conference on
Plasticity by the International Committee on Plasticity, Juneau, Alaska, July 13-17,
1997
76. “Unified Modeling of Cyclic Loading and Relaxation”, H. Garmestani Proceedings of
the International Conference on Plasticity by the International Committee on
Plasticity, Juneau, Alaska, July 13-17, 1997.
77. “Phenomenological Modeling of Superplastic Al-7475”, F. Booeshaghi, H.
Garmestani, P. N. Kalu, Light Weight Alloys for Aerospace Applications IV. Edited
by E. W. Lee, W. E. Frazier, N. J. Kim, and K. Jatta. The Minerals, Metals &
Materials Society, 1997.
78. “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed
via the Melt Overflow Process”, in NASA ACE Center Series: Proceedings of the
NASA University Center Technical Conference on Education, Aeronautics, Space,
Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque,
NM, vol,. 1, pages 925-929
(1997).
79. “Texture Studies of Gamma Titanium Aluminide Sheets produced by melt overflow
rapid solidification”, M. L. Weaver, H. Garmestani, G. Das, in High Ordered
Intermetallic Alloys VII, Mat. Res. Soc. Symp. Proc., v. 460, pages 243-248 (1997)
80. “A Novel Microcharacterization Technique in the Measurement of Strain and
Orientation Gradient in Advanced Materials”, H. Garmestani, K. Harris, L. Lourenco,
Proceedings of the NASA University Research Centers, in NASA ACE Center
Series: Proceedings of the NASA University Research Center Technical Conference
on Education, Aeronautics, Space, Autonomy, Earth and Environment
(URC_TC’97), ACE Center Press, Albuquerque, NM, vol. 1, pages 931-936 (1997).
81. “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed
via the Melt Overflow Process”, M.L. Weaver and H. Garmestani, in NASA ACE
Center Series: Proceedings of the NASA University Research Center Technical
Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment
(URC_TC’97), ACE Center Press, Albuquerque, NM, vol. 1, pages 925-929 (1997).
82. M.L. Weaver and H. Garmestani, “Texture Studies of Gamma Titanium Aluminide
Sheets Produced By Melt Overflow Rapid Solidification,” to appear in the
proceedings of the Materials Research Society Fall Meeting vol. 460, session on
High Temperature Ordered Intermetallic Alloys VII, Boston, MA, Materials Research
Society, November 1996.
83. “Microstructural Characterization of Al8090 Superplastic Materials Using Orientation
Imaging Microscopy“, Proceeding of the Microscopy Society of America Meeting in
Kansas City, August 13-17, 1995. P
84. “Low Cycle Fatigue of High Temperature Composite Materials”, N. Fox, H.
Garmestani, Proceedings of the Second International Conference on Composite
Engineering, Aug. 20-24, 1995. p237-238
85. “Measurement of Thermal Stresses Using Non-Uniform Thermal Expansion in
Inhomogeneous Materials”, H. Garmestani, L. Lourenco, M. Gholami, M. Ebrahimi,
Proceedings of the Second International Conference on Composite Engineering,
Aug. 20-24, 1995. PP245-246
86. “Multi-Axial Investigation of High Field Composite Solenoids”, A. Cox, H.
Garmestani, D. Markiewics, I. Dixon, Proceedings of the Second International
Conference on Composite Engineering, Aug. 20-24, 1995. PP167-168.
87. “Elastic-Plastic Analysis of a Composite Cylinder with Body Forces”, M. R. Vaghar,
H. Garmestani, Proceedings of the Second International Conference on Composite
Engineering, Aug. 20-24, 1995. PP 769-770
88. “Microstructural Evolution and Characterization of Al-8090 Superplastic Materials”,
H. Garmestani, P. Kalu, D. Dingley, Proceeding of the Light Weight Alloys for
Aerospace Applications III, 124th Annual Meeting of TMS, Feb 12-16, 1995.,
PP177-187.
89. “Rheological Modeling of Superplasticity”, F. Booeshaghi, H. Garmestani,
Proceedings of the 32nd annual meeting of the Society of Engineering Sciences,
October 29-November 2, 1995. 169-170
90. “Statistical Continuum Theory for Inelastic Behavior of a Two-Phase Medium”, H.
Garmestani, S. Lin, B. Adams, Proceedings of the 32nd annual meeting of the
Society of Engineering Sciences, October 29-November 2, 1995.
91. “Neural Network Based Simulation of Transient Behavior of Aluminum-1100”,
Feteih, S., Tsai, J. Booeshaghi, Proceedings of the 32nd annual meeting of the
Society of Engineering Sciences, October 29-November 2, 1995. 155-156
92. “Microscopic Strain Field Analysis”, K. Harris, H. Garmestani, L. Lourenco,
Proceedings of the 32nd annual meeting of the Society of Engineering Sciences,
October 29-November 2, 1995. 211-212
93. “Stress Analysis of a Superconducting Solenoid Using Green’s Function Solution”,
M.R. Vaghar and H. Garmestani, Proceedings of the 32nd annual meeting of the
Society of Engineering Sciences, October 29-November 2, 1995. 631-632
94. "Statistical Continuum Theory For Inelastic Behavior of A Two-Phase Medium", H.
Garmestani, Proceedings of the 14th Imacs World congress on Computational and
Applied Mathematics, Atlanta, Georgia, July 11-15, vol. 1, pp 183, 1994.
95. "Investigation of Deformation Mechanisms of Superplastic Materials Using
Diffraction Patterns", H. Garmestani, G.S. Sohi, S. Mukherjee, N. Chandra,
Superplasticity and Superplastic Forming of Advanced Materials, 10 Pages, Ed. N.
Chandra et. al., TMS Publications, 1993.
96. "Experimental and Numerical investigation of Superplastic Forming", N Chandra, H.
Garmestani, International Conference on Superplasticity in Advanced Materials,
ICSAM'94, May 24-26, 1994, Moscow, Russia.
97. "Effect of Interfacial Properties on the Transverse Mechanical Behavior of
Metallic/Intermetallic Matrix Composites- A Computational Study," C.R. Ananth., N.
Chandra, K. Murali, H. Garmestani, Proceedings of the Fall meeting of The
Minerals, Metals, & Materials Society (TMS) and ASM International, Pittsburgh, PA,
October 17-21, 1993. TMS Publication.
98. "Elastoplastic
Analysis
of
Process
Induced
Residual
Stresses
in
Metallic/Intermetallic Matrix Composites", C. R. Ananth, N. Chandra, H. Garmestani,
Proceeding of the International Conference on computational plasticity, Barcelona,
Spain, April 5-7,1992.
99. "Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites", C.
R. Ananth, N. Chandra, H. Garmestani, Computational Plasticity: Fundamentals and
Applications, 1992, Ed. D.R.J. Owen, et. al., Pineridge Press, 2205-2216.
100.
“Controlled Inelastic Strain Rate Experiments”, Garmestani H., Hart E. W.,
JOM-J Min Met Mat S 40: (7) A55-A55 Jul 1988
101.
Biaxial small strain yield behavior in single-phase metal tubes,” Adams B. L.,
Raghavan R. K., Garmestani H., JOM-J MIN MET MAT S 36: (7) 60-60 1984
102.
Conferences organized:
103.
One of the organizers for the First International Conference on Laser
Peening (15th-17th December, 2008) Houston-Texas, USA
104.
Organized a session on Materials Design as part of the Plasticity 2009, St
Thomas, Virgin Islands, USA, January 3-8, 2009
105.
Organized the 3rd International Joint Conference on Advanced Materials and
Design- ISDT 2009 - Integrated Systems, Design and Technology 106.
Co-organized the Computational Materials Design symposium as part of
MMM conference in Tallahassee, Fl on October 26-30, 2008.
1.
PRESENTATIONS AND INVITED TALKS:
(2011)
1. Z. Razavi Hesabi, J. Gracio, S. Ahzi, H. Garmesatni, “Contribution of different
strengthening mechanisms in metal matrix nanocomposites”, TMS 2011, 26 Feb-3
March, San Diego, USA.
2. Hoda A. Hamedani,Nageh K. Allam, Hamid Garmestani and Mostafa A. El-Sayed,
Synthesis and Characterization of Vertically Oriented Sr-doped TiO2 Nanotubes Using
Electrochemical Anodization, in Process
3. Hoda A. Hamedani,Nageh K. Allam, Hamid Garmestani and Mostafa A. El-Sayed,
poster presentation at the TMS2011 Conference, Feb. 27th- Mar. 3rd, 2011.
4. Pooyan P., Tannenbaum R., Garmestani H. [Feb, 2011], "Fabrication of a Cellulosebased Nanocomposite with an improved Supermolecular Structure as a Potential
Scaffold in Cardiovascular Tissue Engineering", Georgia Tech Research and Innovation
Conference, Atlanta, GA.
5. Pooyan P., Tannenbaum R., Garmestani H. [Feb, 2011], "Cellulose-based Scaffold in
Cardiovascular Tissue Engineering", Biomimetic and Bio-inspired Materials at TMS
conference, San Diego, CA,
6. Pooyan P., Tannenbaum R., Garmestani H. [March, 2011], "Cellulose-based
Nanocomposite as a Potential Cardiovascular Tissue-Engineered Scaffold",
Biomimetics and Biomaterials at iBE: Advancing Biology-Inspired Engineering, Atlanta,
GA.
7. Pooyan P., Aidun C.K., Tannenbaum R., Garmestani H. [March, 2011], "Cellulosebased Nanocomposite as a Potential Scaffold in Cardiovascular Tissue Engineering",
Annual IPST Executive Conference, Atlanta, GA.
8. Pooyan P., Tannenbaum R., Garmestani H. [March, 2011], "Cellulose-based Scaffold in
Cardiovascular Tissue Engineering", Regenerative Medicine: Innovation for Clinical
Applications, Hilton Head, SC.
(2009)
9. H. Garmestani, Characterization of Viscoplastic property of multi-phase structures using
Statistical Continuum Mechanics, Presented at the 2009, St Thomas, Virgin Islands,
USA, January 3-8, 2009
10. H. Garmestani, “The Role of Nano-structure in the Microstructure Design of Fuel Cell
Materials”, Presented to The School of Engineering Science at Simon Fraser University
on February 9, 2009.
11. H. Garmestani, “Characterization of Viscoplastic property of multi-phase structures
using Statistical Continuum Mechanics” 3rd International Joint Conference
on Advanced Materials and Design, ISDT 2009 - Integrated Systems, Design and
Technology, May11-14, 2009.
(2008)
12. H. Garmestani, “Microstructure Sensitive Design of Fuel Cell (Electrolyzer) Materials”,
The Mechanical Engineering - Engineering MMM 2008, 4th International Conference,
October 27-31, 2008, Tallahassee, Fl
13. H. Garmestani, “Microstructure Sensitive Design of Fuel Cell (Electrolyzer) Materials”,
The Mechanical Engineering - Engineering Department of Advanced Materials and
Nanotechnology, College of Engineering, Peking University, Beijing 100871, June 3rd,
2008
14. H. Garmestani, “Microstructure Sensitive Design of Fuel Cell (Electrolyzer) Materials”,
March 26th 2008, Invited talk at University of New Mexico,
15. H. Garmestani, “Effect of Deformation History on Magnetic Processing of Materials”,
May 12, 2008, Presented to IMAP3 Tokeo, Japan,
16. H. Garmestani, “Effect of magnetic texturing on diamagnetic and paramagnetic
materials”, , Presented to ICOTOM (15th International conference on Texure,
Pittsburgh, May 1, 2008 .
17. H. Garmestani, Microstructure Design using Statistical Correlation Functions, Presented
to First AAM 2008 Conference, in New Orleans, June 2008 (Key Note Talk),
18. H. Garmestani, The Role of Nano-structures in Microstructure Design of Solid Oxide
Fuel Cells, Presented to the 2nd International Conference on Advanced Nano
Materials, June 22nd -25th 2008, Aveiro, Portugal A.
19. H. Garmestani, “Microstructure Design of Solid Oxide Fuel Cell Materials”, Presented to
the conference on Knowledge Management in Composite Materials (KMCM),
Vancouver, Ca, June 30th, 2008.
20. H. Garmestani, “The Role of Nano-structures in Microstructure Design of Solid Oxide
Fuel Cells”, Presented to the Michigan Tech University as part of the Mechanical
Engineering department seminar series. Michigan Tech,. October 8, 2008.
21. H. Garmestani, “Homogenization relations for multiscale modeling of materials”,
Presented to MMM conference in Tallahassee, Fl,. October 26, 2008.
22. H. Garmestani, “Wear resistance and Texture Evolution of ultra high molecular weight
polyethylenes ”, Presented to Third International Conference on Polymer Behavior.
Marakesh, Morocco, November 11, 2008.
(2007)
23. H. Garmestani, D. Li, M. Khaleel, “Microstructure Design of Solid Oxide Fuel Cell
Materials”, Presented to the conference on Knowledge Management in Composite
Materials (KMCM), Dusseldorf Germany, July 3-6, 2007.
24. H. Garmestani, G. Vialle, D. Li “Multi-Property Microstructure and Property Design of
Magnetic Materials”, MPD-5 Cornell University, July 18-20, 2007,
25. H. Garmestani, “Hart’s Model and Its applications”, for Rivlin, Nabarro, Hart in
Thisoluniki, Greece, April27-May1st .
26. “Soft Magnet Multi Property Microstructure Design”, D. Li. H. Garmestani, G. Vialle,
The 13th International Symposium on Plasticity and Its Current Applications, June 2-6,
2007, Alaska,
27. “Microstructure Sensitive Design and Quantitative Prediction of Effective Conductivity in
Fuel Cell Design”, D. Li. H. Garmestani, G. Vialle, The 13 th International Symposium on
Plasticity and Its Current Applications, June 2-6, 2007, Alaska,
28. H. Garmestani, Microstructure Sensitive Design of Fuel Cell Materials. Auguest 2nd:
Invited talk at PNNL
29. H. Garmestani, D. S. Li, …Structure of Polymer Conference in Strasbourg, France:
Effect of Texture of Wear properties of High Density PolyEthylene., October 10.
30. H. Garmestani, “Microstructure sensitive Design of Fuel Cell Materials”, for Craig
Hartley Honorary Symposia, TMS Meeting in Orlando (February 26-28).
31. H. Garmestani, D. S. Li, “Process Path Modeling of Textured Polycrystalline Materials”,
TMS Meeting in Orlando (February 26-28).
32. H. Garmestani, S. S. Park, E. Lee, “Processing of AA6xxx materials for Superplastic
Properties”, TMS Meeting in Orlando (February 26-28):
33. D. Sheng Li, H. Garmestani, “Microstructure Design for Wear Properties Optimization –
application to bone implants” TMS Meeting in Orlando (February 26-28):
34. H. Garmestani, Microstructure Sensitive Design of Fuel Cell Electrolyzer Materials”
March 8th: Invited Talk at Idaho National Lab.
35. H. Garmestani, D. S. Li, G. Vialle, Army Solid Mechanics conference (April 4th):
“Microstructure Design of Soft Magnet Materials”
36. H. Garmestani, “Fuel Cell Design and Statistical Correlation Functions as a Tool for
Microstructural Design”, Presented to Universite Louis Pasteur, Department of
Mechanical Engineering, June 27th, 2006.
37. Microstructure and Mechanical Properties of Rolled Sheet and Forged Block GammaTitanium Aluminides: Russell J. Foon; Julius De Rojas1; Sun Hyung Kim; Nicole
Sporer1; Richard Clark; John Ogren; Omar Es- Said1; Kyle Mori; Elizabeth Villalobos1;
Hamid Garmestani; Dongsheng Li; Gopal Das; Titanium Alloys for High Temperature
Applications - A Symposium Dedicated to the Memory of Dr. Martin Blackburn: Titanium
Based Intermetallic Alloys for High Temperature Applications – Gamma, 2006 TMS
Annual Meeting, San Antonio, TX, March 14, 2006
38. Processing Path Design and the Integration of Texture and Micro- Texture Evolution:
Hamid Garmestani Amiya Mukherjee Symposium on Processing and Mechanical
Response of Engineering Materials: Modeling of Material Behavior Sponsored by: The
Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing
Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of
Materials Committee, TMS: Shaping and Forming Committee, 2006 TMS Annual
Meeting, San Antonio, TX, March 14, 2006
39. H. Garmestani, “Statistical Distribution Functions for Multi-Scale Design of
Materials”, Presented to University of Luxembourg and Henri Tudor Research
center, June 23rd, 2006.
40. H. Garmestani, “Statistical Correlation Functions as a Tool for Microstructural Design”,
Presented to Northwest Consortium for Multiscale Mathematics and Applications
Multiscale Modeling of Materials: Mathematics and Computation May 25-30, 2006.
University of Puget Sound, Tacoma, WA.
41. Microstructure Design Using Statistical Correlation Functions”, Presented to Oak-Ridge
National Lab, March 22, 2006.
42. H. Garmestani, “Microstructure Sensitive Design of Fuel Cell Materials Symposium for
Microstructure Sensitive Design in Madras, Chennai, India, December 1-6, 2005.
43. H. Garmestani, “Microstructure Design Using Statistical Correlation Functions”,
Mathematisches Forscchungsinstitut Oberwolfach, January 22-January 28th, 2005.
44. B. Z. Cui , K. Han , H. Garmestani , N. M. Dempsey , J. P. Liu , H. J. Schneider-Muntau,
“Magnetic Properties of FePt and FePtAg Nanostructured Magnets by Cyclic Cold
Rolling”, 50th MMM Conference (10/30/05-11/03/05), San Jose, California
45. C. M. B. Bacaltchuk, G. A. Castello-Branco, H. Garmestani, “High Magnetic Effects on
Texture of Grain-Non Oriented Silicon Steel”, Proceeding of the 1 st International
Conference on Diffusion in Solids and Liquids. DSL-2005, July 6-8, University of
Aveiro, Aveiro, Portugal.
46. H. Garmestani, D.S. Li, J. Bouhattate, S. Ahzi, and M. Khaleel, Processing Path Model
to Describe Texture Evolution During Mechanical Processing, Proceeding of the
ICOTOM 14, July 11-July 15, 2005, Leuven, Belgium.
47. H. Garmestani, ICOTOM 14, July 11-July 15, 2005, Leuven, Belgium.
48. M. Iskandar, O. Essaid, et. Al. and H. Garmestani, “The Effect of Rolling Mode on the
Mechanical Strength and Crystallographic Texture of Rhenium Metal” Proceeding of
the 16th International Plansee Conference on Refractory Materials (May 2005).
49. M. Iskandar, O. Essaid, et. Al. and H. Garmestani, “The Effect of Rolling Mode on the
Mechanical Strength and Crystallographic Texture of Rhenium Metal” Proceeding of
the 16th International Plansee Conference on Refractory Materials (May 2005).
50. H. Garmestani, Use of Two Point Statistical Correlation Functions in inverse
Methodology for Materials Design”, Presented to the DOE workshop in Multi Scale
Mathematics, Portland Oregon, September 21-24, 2004
51. G. Saheli, H. Garmestani, A. Gokhale, “Effective Elastic Properties of an Al-SiC
Composite Using Two-point Statistical Mechanics Approach”, The 8th International
Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2004,
June 13-17, 2004, Ohio Sate University, US
52. B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, H. J. SchneiderMuntau Magnetization Reversal and Nanostructure Refinement in Magnetically
Annealed Nd2Fe14B/a-Fe-type Nanocomposites, accepted by the 49th MMM
Conference and will appear on JAP, 2005.
53. B. Z. Cui, k. Han, h. Garmestani , h. J. Schneider-muntau, j. H. Su, j. P. Liu,
enhancement of the material properties by magnetic field assisted phase
transformation, International Workshop on Materials Analysis and Processing in
Magnetic Fields Tallahassee, FL, March 2004, in press.
54. B. Z. Cui, K. Han, H. Garmestani, H. Schneider-Muntau, J. P. Liu, ¡°Nanostructure,
Crystallographic Texture, Exchange Coupling, In-plan Magnetic Anisotropy and Hard
Magnetic Properties of Nd2Fe14B/a-Fe-type Nanocomposites Prepared by Magnetic
Annealing¡±, DARPA MetaMaterials PI Review (abstract), Colorado Springs, CO, USA,
August 4-7 (2003) Part II, p11.
55. B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, H. J. SchneiderMuntau Magnetization Reversal, Nanostructure Optimization and Magnetic Property
Enhancement in Magnetically Annealed Nd2Fe14B/-Fe-type Nanocomposites,
Proceeding of 2004 MMM conference.
56. D.S. Li, H. Garmestani, “Processing Path of Crystal Orientation Coefficient during
Plastic Deformation”, Dislocations, Plasticity and Metal Forming, ISBN 0-9659463-4-7,
Published by NEAT Press, 2003, 487-489
57. G. Saheli, A. Belvin, H. Garmestani, and B. L. Adams, “Microstructure sensitive design
for a two-phase composite material”, PLASTICITY 2003, July 7-11, 2003, Quebec City.
58. D.S. Li, H. Garmestani. A Linear Model of Processing Path in Cubic-Orthotropic
System. Multiscale modeling and characterization of elastic inelastic behavior of
engineering materials, Published by Kluwer, Eds: S. Ahzi et al., 2003, pp. 307-314
59. D.S. Li, H. Garmestani, “Prediction of Texture Coefficients Evolution During Bulk
Deformation”, Twelfth Symposium on Processing and Fabrication of Advanced
Materials, Oct. 2003.
60. D.S. Li, H. Garmestani. Modeling of Processing Path in Processing of Titanium.
Proceedings of International Light Metals Conference 2003.
61. H. Garmestani, G. Saheli, D. L. Li, “Microstructure Sensitive Design of Two Phase
composites”, 7th US National Congress on Computational Mechanics at Albuquerque,
New Mexico, July 27-31, 2003.
62. D.S. Li, H. Garmestani. Processing Path of Crystal Orientation Coefficient during Plastic
Deformation. Dislocations, Plasticity and Metal Forming, ISBN 0-9659463-4-7,
Published by NEAT Press, 2003, 487-489
63. Frank Johnson,…Crystallization, Morphology and Magnetic Properties of Melt-spun
(Nd,Pr,Dy)₂(Fe,Co,Mo)₁₄B/[[alpha]] Fe Nanocomposites ID:
TMAG-03-10-0233, MMM conference, 2003
64. BauZhi,..Induced anisotropy in FeCo-based nanocrystalline ferromagnetic alloys
(HITPERM) by very high field annealing, ID: TMAG-03-10-0248, 2003
65. H. Garmestani, G. Saheli, G. A. Castello-Branco, Brent Adams - AIAA, 9th
AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta,
Georgia, September 4-6, 2003.
66. C. M. B. Bacaltchuk, G. A. Castello-Branco, M. Ebrahimi, H. Garmestani and A. D.
Rollett - 2003 TMS ANNUAL MEETING · San Diego, California , March 2003.
67. G.A.Castello-Branco, C.M.B.Bacaltchuk, H.Garmestani - Proceedings of the
THERMEC’2003 Conference – Madrid, Spain - July/03
68. G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld,
H.Garmestani - Proceedings of the TI-2003, 10th International Conference in Titanium,
Hamburg, Germany – July 2003
69. G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld,
H.Garmestani - 2003 MS&T '03: Materials Science & Technology, Symposium Name:
General Abstracts 2003, Chicago, Illinoys, November 2003
70. G.A.Castello-Branco, C.M.B.Bacaltchuk, J. C. Fanning, H.Garmestani- 2003 MS&T '03:
Materials Science & Technology 2003- Symposium:Processing and Properties of
Structural Materials,Chicago, Illinoys, November 2003
71. C.M.B.Bacaltchuk, G.A.Castello-Branco, H.Garmestani - 2003 MS&T '03: Materials
Science & Technology, Symposium: Processing-Structure-Property-Performance
Relationships,Chicago, Illinoys, November 2003
72. Arun Gokali, A. Tewari H. Garmestani, Utility of geometric constrains for modeling twopoint correlation functions, PLASTICITY 2003, Quebec City July 7-11
73. H. Garmestani A. Belvin, G. Saheli, H. Garmestani and B. L. Adams, Microstructure
sensitive design for a two-phase composite material, PLASTICITY 2003, Quebec City
July 7-11
74. “Microstructure Representation and Optimization Using Statistical Continuum
Approaches”, Presented to the weekly department seminar at University of Texas in
Dallas, Texas on December 19, 2002.
75. "Modeling of Residual stress in two phase composites", H. Garmestani, M. Haik, G.
Jefferson, TMS Annual Meeting, Columbus, Ohio, October 6-9th, 2002.
76. “Statistical Mechanics Analysis of Heterogeneity”, Presented to IUTAM conference in
Morocco, October 20-24th, 2002, Marakesh, Morocco
77. “Advanced Processing and Characterization for Texturing of Materials”, Presented to
Materials Science and Engineering at Drexel, January 28, 2002.
78. H. Garmestani and B. L. Adams, Statistical continuum theory for characterization of
heterogeneity using strain energy, Plasticity Conference in Aruba, January 3-9, 2002.
79. B. L. Adams, S. R. Kalidindi and H. Garmestani, “Spectral Representation of
Microstructure Evolution in Polycrystals”, TMS conference on Microstructure Modeling
and Prediction During Thermomechanical Processing, Edited By:
Raghavan
Srinivasan, S. L. Semiatin, Armand beaudoin, Steven Fox, Zhe Jin, Held November 4-8,
2001, Indianapolis, Indiana.
80. “Statistical Mechanics Modeling of Polycrystalline Materials”, Presented to the
Mechanics and Materials Conference in SanDiego, June25-28, 2001.
81. “Spectral And Statistical Mechanics Representation Of Microstructure Evolution”
Presented to Wright Patterson Laboratory, Materials Division, May 24th 2001, (invited)
82. “Advanced Processing and Micro-characterization Techniques for the Production of
Highly Textured Nano-powdered Magnetic Materials”, Presented to NASA Langley
Research, Newport News, May31, 2001. (Invited)
83. “Evolution Of Texture And Anisotropy in Al-2090 Precipitation Hardening Alloys”,
Presented to the Second International Conference on Light Materials, Busan, Korea,
May 6-9, 2001.
84. “Microstructure Sensitive Design”, Presented to the Second International Conference
on Light Materials, Busan, Korea, May 6-9, 2001.
85. “Residual Stress in Thin Films of Strontium-Doped Lanthanum Manganites” MRS, 2000
Spring Meeting, April 23-28, San Francisco, CA
86. “Statistical Continuum Theory for Inelastic Deformation of a Polycrystalline Medium”, H.
Garmestani, S. Lin, Proceeding of ICCE/6 International Committee on Composite
Engineering, June 28-July3, 1999.
87. “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant
Magnetoresistant (LaM)MnO3 Materials”, K/ H. Dahmen, Nelly N. Mateeva, X. Dong, L.
Meta, H. Garmestani Proceeding of ICCE/6 International Committee on Composite
Engineering, June 28-July3, 1999.
88. “Residual stress development during fabrication and processing of Gamma Titanium
based composites”, M. Al-Haik, T. A. Townsley, C. Sabinash, Proceeding of ICCE/6
International Committee on Composite Engineering, June 28-July3, 1999.
89. “A phenomenological model for superplastic materials”, H. Garmestani and F.
Booeshaghi, Proceedings of the Symposium on Superplasticity and Superplastic
Forming, M. A. Khalil, Editor, As part of SES 98 Annual Meeting in Pullman, Wa,
September 27-29, 1998.
90. “Unified Modeling of Inelastic Deformation Including Strain Transients in Cyclic Loading
and Relaxation”, H. Garmestani, Presented at the sepecial Symposium to honor Hart’s
80th Birthday, Proceedings of SES 98 Annual Meeting in Pullman, Wa, September 2729, 1998.
91. Statistical Continuum Mechanics Analysis of Composite Materials, H. Garmestani, S.
Lin, B. Adams, Proceeding of the ICCE/5-International Committee on Composite
Engineering, July 5-11, 1998 in Las Vegas.
92. “Mechanical and Microscopy Analysis of Carbon Composites during high Temperature
Application”. Shahawy, H. Garmestani, C. Goins, M. AlHaik, Proceeding of the ICCE/5International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas
93. “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant
Magnetoresistant (LaM)MnO3 Materials”, M. Li, E. Gillman, K.-H. Dahmen, X. Dong , L.
Brandao, H. Garmestani, Proceeding of the ICCE/5-International Committee on
Composite Engineering, July 5-11, 1998 in Las Vegas.
94. “Statistical Continuum Theory for Microstructure Evolution of an Inelastic
Heterogeneous Medium”, Invited talk at the Mutiscale Modeling of Materials Organized
by the Institute of Materials and the National Livermore Lab. April 9-11, 1997. SanDiego
California.
95. “State Variable Modeling of Relaxation and Cyclic Loading”, Presented at the National
Instititute of Standards and Technology, July 18, 1997.
96. “Texture and Micro-texture Characterization of Advanced Materials”, Presented to The
Materials Lab of the Naval Research Lab of Naval Air Warware Systems at Putaxent
River, Maryland, July 29, 1997.
97. “A Novel Microcharacterization Technique in the Measurement of Strain and
Orientation Gradient in Advanced Materials”, H. Garmestani, K. Harris, L. Lourenco,
Proceedings of the NASA University Research Centers, in NASA ACE Center Series:
Proceedings of the NASA University Research Center Technical Conference on
Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE
Center Press, Albuquerque, NM, (1997). .
98. “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed
via the Melt Overflow Process”, M.L. Weaver and H. Garmestani, in NASA ACE Center
Series: Proceedings of the NASA University Research Center Technical Conference on
Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE
Center Press, Albuquerque, NM, (1997). .
99. “Microstructural Characterization of Al8090 Superplastic Materials Using Orientation
Imaging Microscopy“, Presented at the Microscopy Society of America Meeting in
Kansas City, August 13-17, 1995.
100. “High Temperature Low Cycle Fatigue Analysis of Composite Materials”, Presented
at the Second International Conference on Composite Engineering, Aug. 20-24, 1995.
101. “Measurement of Thermal Stresses Using Non-Uniform Thermal Expansion in
Inhomogeneous Materials”, Presented at the Second International Conference on
Composite Engineering, Aug. 20-24, 1995.
102. “Multi-Axial Investigation of High Field Composite Solenoids”, A. Cox, H.
Garmestani, D. Markiewics, I. Dixon, Presented at the Second International Conference
on Composite Engineering, Aug. 20-24, 1995.
103. “Elastic-Plastic Analysis of a Composite Cylinder with Body Forces”, M. R. Vaghar,
H. Garmestani, Presented at the Second International Conference on Composite
Engineering, Aug. 20-24, 1995.
104. “Microstructural Evolution and Characterization of Al-8090 Superplastic Materials”,
H. Garmestani, P. Kalu, D. Dingley, Presented at the Light Weight Alloys for Aerospace
Applications III, 124th Annual Meeting of TMS, Feb 12-16, 1995.
105. "Micro-Mechanical Characterization of AlLi-8090 Superplastic Material", H.
Garmestani, P. Kalu, K. Mehr, J. Kuhlhof, N. Chandra, The annual conference of the
Materials Society (TMS) in Las Vegas, February 12-17-1995.
106. "Investigation of Residual Stress Development during processing of Ti47Al2Ta
matrix composite materials", H. Garmestani, T. Townsley, The annual conference of the
Materials Society (TMS) in Las Vegas, February 12-17-1995.
107. "Mechanical and Micro-texture evolution of Al-Li Superplastic Materials", H.
Garmestani, K. Mehr, P. Kalu, N. Chandra, International Conference on superplasticity,
Manchester, England, December 2-5th, 1994.
108. "Statistical Continuum Theory For Inelastic Behaviour of A Two-Phase Medium", H.
Garmestani, Proceedings of the 14th IMACS (International Association for Mathematics
and Computers in Simulation), World Congress on Computational and Applied
Mathematics, Atlanta, Georgia, July 11-15, vol. 1, pp 183, 1994
109. "Experimental and Numerical Investigation of Superplastic Forming", N Chandra, H.
Garmestani, International Conference on Superplasticity in Advanced Materials,
ICSAM'94, May 24-26, 1994, Moscow, Russia
110. "Microcharacterization of Aluminum Based Fiber Reinforced Composites," H.
Garmestani S. Mukherjee, M. Ebrahimi, N. Chandra, Presented at the TMS Fall
meeting of The Minerals, Metals, & Materials Society and ASM International, Pittsburgh,
PA, October 17-21, 1993
111. "Effect of Moisture and Temperature on the Compressive Response of Woven
Composite Laminate," J. King, N. Chandra, R. Rai, K. Murali, H. Garmestani, Presented
at the TMS Fall meeting of The Minerals, Metals, & Materials Society and ASM
International, Pittsburgh, PA, October 17-21, 1993
112. "Effect of Interfacial Properties on the Transverse Mechanical Behavior of
Metallic/Intermetallic Matrix Composites- A Computational Study," C.R. Ananth., N.
Chandra, K. Murali, H. Garmestani, Presented at the TMS Fall meeting of The Minerals,
Metals, & Materials Society and ASM International, Pittsburgh, PA, October 17-21,
1993
113. Microstructural Failure Analysis Studies in Metal Matrix Composites Using The
Backscattered Kikuchi Diffraction Technique" H. Garmestani, M. Ebrahimi, and N.
Chandra, Presented in Fourth International Conference on Structural Failure, Product
Liability and Technical Insurance, Vienna, Austria July 6-9, 1992.
114. "Finite Element Approach to Evaluation of Residual Stress in Metal Matrix
Composites", C.R. Ananth, N. Chandra, and H. Garmestani, Presented in the 28th
Annual Technical Meeting of the Society of Engineering Science, November 6-8, 1991.
115. "Elastic-Plastic Fatigue Analysis of a Structural Joint Using Experimental and
Computational Methods", N. Chandra, H. Garmestani, V.S. Rao, and M. Shahawy,
Presented in the 28th Annual Technical Meeting of the Society of Engineering Science,
November 6-8, 1991.
116. "Measurement of Local Strain in Metal Matrix Composite Interfaces Using
Backscatter Kikuchi Diffraction Technique", H. Garmestani, M. Ebrahimi, N. Chandra,
Mechanical Alloying/Composites, 120th TMS Annual Meeting, New Orleans, Louisiana,
February 17-21, 1991.
117. "Evolution of Statistical Measures of a two phase Medium", H. Garmestani, B.L.
Adams, Fall Meeting of The Materials Society (TMS) Composite Materials Meeting,
November 1990.
118. "Controlled Inelastic Strain Rate Experiments", H. Garmestani, E.W. Hart. 1988
Fall Meeting of American Society of Metals, The Metallurgical Society (ASM-TSM),
Chicago, September 24, 1988.
119. "Biaxial Small Strain Yield Behavior in Single Phase Metals", R.K Raghavan, B.L.
Adams, H. Garmestani, Fall Meeting of the TMS Shaping and Forming, Detroit, Mi,
September 19, 1984.
120. "Biaxial Small Scale Yield Behavior Of Textured Copper Tubing With Anelastic
Recovery", H. Garmestani, B.L. Adams. 1983 Fall Meeting of the Mechanical and
Physical Metallurgy Society, Philadelphia, September 1983.
Editorial Responsibilities:
123-
Associate Editor of Mechanics of Materials
Member of the editorial board of the International Journal of Plasticity
Associate Editor for the International Journal of Engineering Materials and
Technology
Member of the editorial board of the Metallurgical and Materials Transactions (until
2007).
5- Editorial Board of Computers, Materials and Continua
6- Editorial Board of Theoretical and Applied Multi-scale Modeling of Materials.
4-
Conferences Organized
2009:
1- Conference Chair for the fourth international workshop on Materials Analysis and
Processing in Magnetic field in May 2010: www.map4.gatech.edu.
2- Conference Chair for Organized the TMS- Microstructure Characterization,
Analyses, and Design in October 2009
3- Co-Organized the Integrated Systems, Design and Technology (ISDT)- Conference
Program in Ankorage, Alaskam May 11-14, 2009)
4- Organized a symposium on Materials Design as part of : PLASTICITY 2009, St
Thomas, Virgin Islands, USA, January 3-8, 2009
2008:
5- Organized a symposium on Materials and Microstructure Design as part of
PLASTICITY 08, Keauhou Bay Resort, Kailua/Kona
6- Co-Organized the First International Conference on Laser Peening (15th-17th
December, 2008) Houston-Texas, USA
7- Organized a session on Magnetic Texturing of materials as part of the 15th
International Conference on Textures of Materials (ICOTOM 15), 1-6 June 2008 •
Carnegie Mellon University Center • Pittsburgh, Pennsylvania
2007:
8- Organized the Materials and Microstructure Design symposium Microstructure and
Materials Design as part of Plasticity 07, Alaska, June 2-6, 2007
9- Organized the Hartley Honorary Symposia on Mathematical Modeling of Materials
and Microstructures... At TMS, Annual meeting in Orlando February 26-28, 2007
10- Co-organized THE 1ST WORLD MATERIAL MECHANICS SYMPOSIUM” in
Thessaloniki, Greece (April 29-May 1st, 2007)” in the honor of Frank Nabarro, Ed
Hart, Ronald Rivlin
2006:
11- Organized a symposium on “Brent Adams” Honorary Symposium on
Homogenization Techniques and Microstructure Design and Characterization as
part of the International Plasticity conference in Halifax, Nova Scotia (Canada), July
17-22, 2006
2005:
12- Organized a Symposium on Materials and Microstructure Design as part of the
International Conference on Computational and Experimental Engineering and
Sciences December 1-6, 2005, Indian Institute of Technology Madras, Chennai.
INDIA
13- Challenges in Designing Materials as part of the Eleventh International Symposium
“Plasticity 2005” in the island “Kauai", Hawaii, during Jan. 4-8, 2005.
2004:
14- Organized the Materials Design Conference in 2004 at Georgia Institute of
technology.
15- Organized the symposium on “Materials By Design” in International Journal of
Plasticity conference in Aruba, January 2002.
16171819202122232425262728-
Co-organized the mini-school on materials by Design at Drexel, December 2002.
Organizing committee for the Society of Engineering Sciences (97,99)
Organizing committee for the International Committee of Plasticity (99)
Organizing committee for the International Composite Engineering Committee
Member of the International Composite Committee of TMS
Organized a Superplasticity Conference in Chicago TMS Conference, Nov. 2-5,
1992.
Organized the Symposium on Failure Mechanisms in Heterogeneous materials,
ASME Fall, November 1996, Atlanta, Georgia
Organized the Symposium on Phenomenological Modeling of Inelastic Materials,
The sixth International Symposium on Plasticity, Alaska., Sept 1997
Organized a symposium as part of the Society of Engineering Sciences in Portland
Washington to honor Hart’s 80th Birthday., Sep. 1998
Organized a Symposium on Mechanics of Heterogeneity, the Seventh
Frequent Panel reviewer for NSF Mechanics and materials (Feb 2000)
Reviewer for International Journal of Solids and Structures
Reviewer for Journal of Composite Science and Technology
Honors:
Awarded “Superstar in Research” by FSU-CRC in year 2000.
Recipient of the 2000 Engineering Research Award of the FAMU-FSU College of
Engineering, Spring 2001.
NASA Faculty Award for Research in 1996.
UNIVERSITY RESPONSIBILITIES:
Member of the MARTECH advisory committee.
Member of the Mechanical Engineering Curriculum Committee.
Member of Mechanical Engineering Laboratory Committee.
Chair of the MARTECH Seminar Committee.
Served as a member of the search committee for NHMFL (1992-1993), 1997.
Served as a member of the MARTECH search committee (1993-1995).
AFFILIATIONS:
The Materials Society (TMS)
American Society of Metals (ASM INTERNATIONAL)
Materials Research Society (MRS)
American Society of Testing of Materials (ASTM)
American Society of Mechanical Engineers (ASME)
Society of Engineering Sciences (SES)
TEACHING
EXPERIENCE:
Florida State University (Mechanical Engineering)
Fall 1990 Mechanics of Materials (Undergraduate)
Spring 1991
Advanced Mechanical Metallurgy (Graduate)
Spring 1991
Experimental Methods in Solid Mechanics
Fall 1991 Mechanics of Materials (Undergraduate)
Fall 1991 Continuum Mechanics (Graduate)
Spring 1992
Theory of Plastic Flow and Fracture (Graduate)
Spring 1992
Experimental Methods in Solid Mechanics and Materials
Fall 1992 Design of Machine Elements (Undergraduate)
Fall 1992 Mechanics of Materials (Undergraduate)
Spring 1993
Experimental Methods in Solid Mechanics and Materials
Spring 1993
Theory of Elasticity (Graduate)
Fall 1993 Design of Machine Elements (Undergraduate)
Fall 1993 Crystal and Visco-plasticity, Texture analysis (Graduate)
Spring 1994
Theory of Elasticity (Graduate)
Spring 1994
Experimental Methods in Solid Mechanics and Materials
Fall 1994 Design of Machine Elements (Undergraduate)
Spring 1995
Theory of Elasticity (Graduate)
Spring 1995
Mechanics of Composites
Fall 1995 Design of Machine Elements
Spring 1996
Theory of Elasticity
Spring 1996
Mechanics of Texture
Fall 1996 Experimental Methods in Solid Mechanics and Materials
Fall 1996 Theory of Plasticity and Inelasticity
Spring 1997
Theory of Elasticity (Graduate)
Spring 1997
Mechanics of Composites (Graduate)
Fall 1997 Continuum Mechanics (Graduate)
Fall 1997 X-ray Diffraction (Graduate)
Spring 1998
Experimental Methods in Solid Mechanics and Materials
Spring 1998
Mechanics of Composites (Graduate)
Fall 1998 Experimental Methods in Solid Mechanics and Materials
Fall 1998 Continuum Mechanics (Graduate)
Spring 1999
Mechanics and Materials-I (Undergraduate)
Spring 1999
Texture (Graduate)
Summer 1999
Mechanics and Materials-I (Undergraduate)
Fall 1999 Mechanics of Materials- II (undergraduate)
Fall 1999 Statistical Continuum Mechanics-I (Graduate)
Spring 2000
Mechanics and Materials-I (Undergraduate)
Spring 2000
Texture (Graduate) (Graduate)
Spring 2000
Statistical Continuum Mechanics-II (Graduate)
Summer 2000
Mechanics and Materials-I (Undergraduate)
Fall 2000 Composite Materials (Graduate)
Fall 2000 Experimental Methods in Solid Mechanics and Materials
Fall 2000 Special Topics in Magnetic Materials (Graduate)
Spring 2001
X-ray Diffraction (Graduate) at GATECH and FSU
Fall 2001 Theory of Plasticity and Damage
Spring 2002
Micro-characterization of Materials (Texture)
Georgia Institute of Technology:
Spring 2002
Diffraction Studies (at Georgia Tech)
Fall 2002 Materials Characterization (at Georgia Tech)
Fall 2002 Continuum Mechanics (FSU)
Spring 2003
MSE 6105 X-ray diffraction
Fall 2003 MSE 6105 X-ray Diffraction
Spring 2004
MSE2020 -Characterization of Materials
Fall 2004 MSE 2001 –Materials Science and Engineering
Spring 2005
MSE 8803 –Electron and X-ray Analysis
Spring 2005
MSE 2020 -Characterization of Materials
Fall 2005 MSE 8503 –Statistical Continuum Mechanics
Fall 2005 MSE 2001 –Materials Science and Engineering
Spring 2006
MSE 2020 - Characterization of Materials
Spring 2006
MSE8803 –Scattering and Micro-Diffraction
FUNDING
Present
Agency
Title of Grant
Date(s)
DOD, PI (sub- Next Generation Structural
contract
Composites Using Surface
through
Grown Carbon Nanotubes
University of
New Mexico)
Pacific
Inverse
Methodology
Northwest
Materials Design
National Lab,
PI
IPST
2/20082/2011
for 1/200812/2010
Fabrication of Super Nanopaper
by Designing of Nanocellulose
with Desired Supermolecular
Structure
2009-
Total
Amount
$310,600
$60,000/ye
ar
One
graduate
student
funding
Pacific
Microstructure Sensitive Design September $53,000/ye
Northwest
in Sealant Materials for Fuel ,
2007- ar
National Lab, Cells
2008
PI
NSF, Co-PI
DOE, PI
NASA
Langley
Industry/University Cooperative
2004-2006
Research
Center
on
Computational
Materials Design (CCMD), (PI:
David McDowell)
Microstructure Sensitive Design 2006-2009
and Processing in Solid Oxide
Electrolyzer Cell
MicroCharacteriation of Stir
2007-2008
Welded Materials (Joint with Dr.
Singh)
$38k
$570,000
$8,700
Pending
Title of Grant
Modeling Laser Peening and
Shot Peening of Precipitation
Hardening Steels to Improve
Their Mechanical and Corrosion
Behavior
Agency
%
Date(s)
Total
Amount
NSF (Co- 50%
PI,
Dr.
Preet
Singh,
Ph.D.
as
the PI)
7/2008-
$520,000
Microstructure Sensitive Design NSF
of Fuel Cell structures
LaFarge
Investigation
Mechanisms
Texturing
100% Septem
ber,
20072008
Failure
2007- $14,000
Analysis of 2008
Kiln Materials
(Joint with
Preet Singh)
Of
The DOE
100% July,
Of
Magnetic
20082013
On the role of a magnetic field
during
heat
treatment
on
textured
growth
of
Ag/Bi2Sr2CaCu2Ox composites
NSF (co- 40%
PI),
(J.
Schwartz
as the PI
from FSU)
SOFC Sealant Material Design NSF
and Optimization
$410,000
for three
years
LaFarge
$620,000
for three
years
July,
20082011
$570,000
for three
years
100% July,
20082011
$502,000
for 3 yrs.
Multiscale
Modeling
and NSF (Co- ~20
Validation of Interfacial Structure PI, PI: R. %
in Polymer Nanocomposites
Tannenbau
m)
08/01/08 $1,106,297
Materials World Network
Microstructure
Design
UHMWPE Materials
07/01/08 697k for
3yrs
LaFarge
NASA Langley
Agency
NSF, -Co-PI
on NSF/FNR
50%
of Joint with
Luxenbour
g Institute
Failure
2007- $14,000
Analysis of 2008
Kiln Materials
(Joint with
Preet Singh)
MicroCharact 2007- $8,700
eriation of 2008
Stir Welded
Materials
(Joint with Dr.
Singh)
Title of Grant
Date(s)
REU with Loyola Mary Mount 2004-2006
University
Total
Amount
$300,000
(2002
2005)
:
Pacific
Northwest
National Lab
Microstructure Sensitive Design January,
in Fuel Cell
2005
$50,000
NSF, PI
Collaborative
to
Integrate 1999-2002
Material
Science
and
Engineering
Research
and
Education, NSF Grant # DMR9982872
$1,551,000
/3yrs
NSF, PI
Cooperative Grain Boundary 2001-2004
Sliding and Heterogeneities of
Grain
Boundary
Character
Distribution
in
Superplastic
Materials,
$430,000/3
yrs
DOD-Army,
PI
“High Field Thermo-magnetic 2001-2004
Texturing of magnetic Materials”,
(9/2001-11/2004).
$870,826/3
yrs
NSF, co-PI
Acquisition of High Temperature 2000-2003
Atomic Force Microscope
$210,000
Army Lab, PI
Processing Path for Optimum 2002-2003
Texture for Titanium-1100
$50,000
MARTECH,
FSU
Texturing and Mechanism of 2002-2003
Deformation in Semi-Crystalline
Polyethylene Materials, Center
for Materials Research and
Technology,
$25,500
NASA,
Center
for
Nonlinear 1999-2003
Phenomena
in
Aerospace
Materials and Structures.
$1,000,000
/yr
(Single)
Contact # NAGW-2930,
$210,000/y
r
FSU, Co-Pi
Center
for
Application
of 2002-2003
Nanotechnology in Micro Total
Analysis Systems (CANmTAS)
$125,000.0
0
AFOSR, Pi
Statistical Mechanics Analysis of 2003-2005
Microstructure Evolution and
Texture in Ti-6Al-4V
$300,000
for 3 years
AFOSR, co-Pi Microstructure Sensitive Design April 2004
Workshop
$30,000
Durip, Co-PI
$160,000
An Integrated
Computational
Incorporation
Experimental- May 2004
System
For
FUNDING DURING 94-2002:
Army Office of Research (ARO), “High Temperature High Field Characterization
of textured materials”, contract #37-1906-118, 1992-2002, $220,000/3 yrs!
National Science Foundation Acquisition of a Scanning Transmission Electron
Microscope, Division of Materials Research, Instrumentation Program (co-PI,
1996-99), $301,871, DMR-0109535 Prior Award No: 9625692
Organization of Naval Research, “Field biasing and thermal stabilization of LaManganite magnetoresistive thin films”, $2,000,000. Contract ONR-N00014-96-10767
NASA , “Plasma Cast Overflow to process Titanium sheet”, Contract # NAG-11866, $310,000 for 3 years 1977-December 99. PI: H. Garmestani,
Department of Transportation "High Temperature Investigation of structural
Composites", $50,000. PI: H. Garmestani, May 1995, December 1995., (Started
on Dec. 24, 1995).
NASA, "Center for Nonlinear Phenomena in Aerospace Materials and Structures",
January 1 1992-December 31 1996. Contact # NAGW-2930, PI: H. Garmestani.
National Science Foundation, "Interactions Between Bulk Hg-Ba-Ca-Cu-O
Superconductor and Metals", $722,367. 1/01/95 to 12/31/97. PI: J. Schwartz.
National High Magnetic Field Laboratory "Experimental and theoretical Analysis
of a high field magnet, $35,000. PI: H.Garmestani.
National Science Foundation "Micro-Mechanical Characterization of Metal Matrix
Composites", $285,630. PI: Prof. N. Chandra, Co-Pi: Prof. H. Garmestani,
November 1991-November 1994.
Contract #HRD-9113351
CONSULTING
EXPERIENCE:
Gould Lewis and Proctor Consulting, Engineer, Gainesville, Florida,
Summer, and Fall 1983.
Department of Transportation, Consultant, Tallahassee, Fl. 1993-1999.
Nasa langley research Center, 2000
Benedict Engineering Co. Inc., Consultant, Tallahassee, Fl. Spring 1994.
Tala Com., Consultant, Tallahassee, Fl. Spring 1994.
`
Collaborators:
D. Markiewics (NHMFL)
Ke Han (NHMFL)
Schneider Muntao (NHMFL)
S. Nourbakhsh (Univ. of NY)
M. Kaufman (Univ. of Florida)
R. Abbschian (Univ. of Florida)
Brent Adams (BYU)
Omar Es-Said (Loyola Marymont University)
E.W. Lee, (Naval Research Lab)
GRADUATE THESIS SUPERVISED
(Major advisor, Current)
1. Gregg Vialle (GATECH, Ph.D.), Microstructure Design and Processing of
Inducture Choke Ferrites for Magneto-elasticity and Magnetostriction.
2. Samuel T. Adedokun (Ph.D. at FAMU)., Optimization of Microstructure and
Grain Boundary Character (Texture and Micro-Texture) Of Aluminum 6xxx
Using magnetic Annealing
3. Jackie Milhans, (Ph.D.) Microstructure Design of Sealant Materials for Solid
Oxide Fuel Cell Materials
4. Hoda Amani (Ph.D.), Synthesis Techniques Based on Spray Pyrolysis for the
production of Large Surface Area Solid Oxide Fuel Cell Electrolyzer
5. Brad Fromm (Ph.D.)
(Major advisor, Completed) (25)
Ph.D: (6 minority, 6 females, 5 African American)
1. Samuel Adedokun (FAMU, Ph.D.-08), Magnetic processing of Aluminum
6xxx
2. Erin Camponeschi. (GATECH, Ph.D.-07), Synthesis and characterization of
Oriented Nano-tube Composites
3. Jamaa Bouhattate(2002-2006), Modeling texture evolution in polycrystalline
materials using spherical harmonics
4. Reesheman Burell
(2000-2006), Mechanical Property Response On
Textured Ultra High Molecular Weight Polyethylene (UHMWPE)
5. Gail Jefferson (2000-2006), Two-Point Probability Distribution Function
Analysis Of Nano-Composites.
6. Ghazal Saheli (9/2000-4/2006), (GATECH), Homogenization Relations for
Elastic Properties Based on Two-Point Statistical Functions
7. Gilberto
Alexander
Castello
Branco
(Ph.D),
(1999-2004),
ThermoMechanical Processing of Titanium
8. Anthony Belvin (Ph.D. 2000-2005), Texture Effects on the Ductile Fracture
and Deformation Behavior of Polycrystalline Nickel
9. Cristiane Maria Basto Bacaltchuk (1999-2004), Magnetic Processing of FeSi
10. DongSheng Li (5/2002) TextureEvolution of Polyethylenes During Uniaxial
Tension
11. Marwan Al Haik (Ph.D. 12/2002), Neural Network analysis of life prediction
12. Shinguang, Lin, (Ph.D. 8/98) "Statistical Mechanics Analysis of a
Heterogeneous medium".
13. F. Booeshaghi (Ph.D., June 1997, from FSU) “Superplasticity”
14. Vaghar, Reza. (Ph.D. 7/96) "Green’s Function Solution for the Stress
Analysis of a Superconducting Magnet"
Masters: (7 minority, 7 females, 5 African American)
1. Antoine Berret, (11/2005), Morphologic Influence Of High Magnetic Fields
On The In-Situ Mocvd (Metal Organic Chemical Vapor Deposition) Of XyleneFerrocene Nanotubes And Structures
2.
3.
4.
5.
6.
7.
8.
Michelle Adams (MS 2003)
Xin Dong (M.S. 8/99) “Microtexture Characterization of thin film materials”
Lathanza Williams (M.S. 1/2000))
Enga Wright (M.S 5/99) “Microcharacterization of cast overflow process”
Sharon Jones (M.S. 9/99)
Neil Bednar (M.S. 5/98)
Kuhlhoff, J. (M.S. 6/95) "Investigation of Mechanical properties of
superplastic materials".
9. Cox, A. (M.S. 5/95)" Biaxial failure analysis of Superconducting solenoids".
10. Murphy, P. (M.S. 1/95) "Biaxial analysis of PMC Composites".
11. Mehr, K. (M.S. 1/95) "Micromechanical Characterization of Al-Li superplastic
materials".
12. Townsley, T. (M.S. 8/95) "Residual stress analysis of Ti-48Al-2Ta
composites"
13. Sohi, G. (M.S. Dec. 1993) "Evolution of Misorientation Distribution Function
for Superplastic Materials"
14. Vaghar, Reza. (M.S. 5/93) "Elastic-Plastic analysis of high Field
superconducting Solenoid"
15. Ebrahimi, Masood (M.S. 5/93) "Residual stress measurement in materials
using Backscattered Kikuchi and x-ray Techniques".
Post-Doctoral, Research Associates and Technical Staff
(Present):
Klaus Dahmen, Visiting Professor, (2003- present)
(Past)
1. Jackie Milhans(2011)
2. Yoon Oh (2010)
3. DongSheng Li, (2002-2010)
4. SungSu Park (Pohang University in Korea)
5. Bauzhi Cui (2003-2006)
6. Askar Sheikali (Ph.D. from Russia)
7. M. Haik (Ph.D. from FSU)
8. Madjid Fathi, Visiting Professor (2003-2004)
9. ShiShen Yan (Ph.D. from LSU)
10. Lamartine Meta (Ph.D. from Northeastern),1998-2001
11. Shuguang Lin (Ph.D. from FSU)
12. Luiz Brandao, Associate Professor of Mechanical Engineering, from Brazil
13. Mark Weaver, (Ph.D. from University of Florida)
14. F. Booeshaghi (Ph.D. from FSU)
15. K. Harris (Ph.D. from Stoney Brooks)
Member of Graduate Committee
(Present)
1. Ming Li, Mechanical Engineering
2. Arun Sreeranganathan (Advisor: Gokhali)
3. Liang Tong (Computer Science)
4. Tao Xu (Advisor: Mo Li) "Computational Study of Microstructure-Property
Relations for Mechanical Behaviors in Nanocrystalline Materials"
5. Xiefei Zhang, Polymer, Textile and Fiber Engineering. (Advisor: Dr. Satish
Kumar working on Single wall carbon nano-tube based films and fibers)
(Past)
1. Ashwin K. Samarao 2011, (ECE), Farrokh Ayyazi
2. Craig Pyszla 2010, (MSE), David McDowell
3. Dong Yang (Mechanical Enginering), Preet Singh
4. Jenine Johnson 2009 (Mechancal Engineering)
5. Mike Haberman 2008 (advisor: Yves Berthelot, and Dr. Mohammed
Cherkaoui)
6. Sangil Han, (Advisor:Dr. Melkote, ME)
7. Paul Wissman, 2008 (Advisor: Martha Grover Gallivan)
8. Harpreet Singh 2008, (advisor: Gokhali)
9. Larry Prangler 2008, Advisor Dr. Rina Tannenbum
10. Stephanie C. Barthe, 2008, (Advisor: Dr. Ronald W. Rousseau, Martha Grover
Gallivan)
11. Martin Lara, 2008, Advisor, Dr. CP Wong, graduated in March 2008
12. Haejin Choi, 2008 (Mechanical Engineering, Dr. Mistree advisor)
13. Vincent Wang, 08 (Advisor: Rosen)
14. Laurent Capolungo, 2007 (Jianmin Qu, Cherkawi)
15. Vibhor Jain, Dr. Karl Jacob, Ph.D., May 2007
16. Jeremy D. Walker, 2006 (Advisor: Rina Tannenbaum)
17. Jiann-Cherng Su, 2006 (Advisor: Steven Liang)
18. Jingping Chen, 2006, (Advisor: Ke Han -FSU)
19. Kasi David, 2006 (Advisor: Rina Tannenbaum)
20. Krishnakumar Sundaresan, August 2006, (Advisor: Ayazi)
21. Babak Vakili Amini, 2006, (Advisor: Dr. Ayazi)
22. Raymond Oh (December 2005) , Joe Cochran
23. Melissa A. Zubris (2005), Materials science, Advisor: Rina Tannenbaum
24. Hongqing Vincent Wang (Fall 2005), Mechanical Engineering, Dr. Rosen
25. David Mebane, Fall 2004, (Advisor: Roserio Gerhart)
26. Clint Barineau, Department of Geology (2004), Ph.D.
27. Mukherjee, J., (Ph.D. 1996),
28. Crisler, W., (Ph.D, 12/93),
29. Wardrope, C., (M.S. 8/93),
30. Forman F. (Ph.D. 1996),
31. Voleti, R. (Ph.D. 1997),
32. Ananth, C. (Ph.D., 1996),
33. Xie, Z. (Ph.D. 1995),
34. Roy, B. (Ph.D., 1993),
35. Steve Palms (Ph.D. 1998 from Geology),
36. Chun(Cathy) Fan, (Ph.D., 2000 ME),
37. Pan Zheng (Ph.D. 2000 from ME),
38. Ebony Waller, (M.S.,1998),
39. King, Jefrey, (M.S. August 1993),
40. Kartik Iyer (M.S. August 1999),
41. Angela Thomas (MS 2001);
42. David Wariobi, (2003)
Undergraduate Research Students
(present):
John Ho,
(past): (43 total, 15 female, 20 African American)
Andrew Stutsman, Houman Peydaye-saheli (2004-2006), A. Ordonez-Chu
(5/2006-8/2006), H. Ahzi (5/2006-8/2006), G. Alapati (5/2006-8/2006), M.
Khatonabadi (5/2006-8/2006), Tamrat Alemayehu (1/2006-2/2007), John Ho
(2006), Kimani Partin (2006), Sunil Patel (2006), Julie Duryee, (2005), Mikhail
Valikhovsky, (2005), Steve Downey (2002-2003), LaQuita Kennon (2001-2003),
Andrew Parry (2002), Antoine Berret (2001-2004), Mark Sheer (2002), Barbara
Gault (2001), Brandon Toliver (2001), Eyana Smith(00), Ouida Blackwood (00),
Graham Cambrice (01), Cherrice Goins (97-00), Jashua Grey (99-00), Loren
Rideout (01), Jared Gilmore (Summer 00, visitor from T. University), Mathew
Thames (99), Ebony Page (99), Cassande Fountain (99), Terrel Jones (98), Edvin
Navarro, Antonio Lee, John Kulhoff, Key Mehr, Ed Dugic, Reda Daher, Keith
Kobetich, James Crawford, Thomas Addison, Shawna Osbourn, Tameika
Franklin, Victoria Ruohomaki, Candice Henderson, Ivy Williams, Roderick Parker,
Lathanza Williams, Miguel Wallace, Pathrick Anderson