Antique Tool & Primitives Auction
October 18, 2008
4835 Central School Road,
St. Charles, MO 63304
1._____ Stanley #5 1/4C junior jack plane (repainted).
2._____ Stanley #5 1/2C jumbo jack plane VG.
3._____ Winchester #3030 18-inch fore plane, VG.
4._____ Wooden 7-drawer machinist tool box.
5._____ Gerstner oak 11-drawer "Tall" machinist tool box.
6._____ Pair slicks or barking spuds.
7._____ Fine unmarked 4-inch slick.
8._____ Unknown handled chopping tool (came with lot of timber framing tools) VG.
9._____ Unusual slick or barking spud w/4-in. blade.
10._____ I. BLOOD poll adz VG.
11._____ D.R. Barton poll adz VG.
12._____ Hand forged gutter adz.
13._____ Collins No. 986 camp axe with leather sheath, VG.
14._____ Fine L&I.J. White coopers chamfer knife.
15._____ W. HUNT poll adz.
16._____ Nice lipped shipwright's adz.
17._____ Unusual mortising axe.
18._____ I. BLOOD BALLSTON, NY broad axe head plus bearded side hatchet, VG.
19._____ Early side hatchet with three touch marks.
20._____ A. CUNNINGHAM early side hatchet.
21._____ Early gutter adz and another adz marked M.PRICE.
22._____ Collins hatchet head with partially intact paper label.
23._____ Unmarked poll adz, VG.
24._____ Leg vise complete and nice.
25._____ Blacksmith's forge & blower VG.
26._____ Anvil 140-lbs.
27._____ Collins & Co. broad axe, some pitting.
28._____ Early winged side axe.
29._____ PEERLESS AXE HOWELL TOOL CO. CLEVELAND broad axe, VG.
30._____ Lot of two long-handled hammers & one chopper.
31._____ DENISON & CO. MYSTIC, CONN. mast axe, VG.
32._____ Goosewing axe head & adz head both needing handles.
33._____ Nice short handled goosewing axe with small touchmark on blade, VG
34._____ Pair of adzes inc. one with square pole.
35._____ Early forged goosewing hatchet.
36._____ Unmarked mortising axe.
37._____ Collins & Co. broad axe, VG.
38._____ PLUMB broad axe, VG.
39._____ Zenith Marshall Wells Tool Co. broad axe, VG.
40._____ Unmarked Pennsylvania? style broad axe.
41._____ Collins broad axe with offset handle, VG.
42._____ I.BLOOD BALLSTON, N.Y. side hatchet, VG.
43._____ Fine FAYETTE R. PLUMB broad axe.
44._____ Unusual mortising axe marked BRADY, D. HOFMAN.
45._____ PLUMB broad hatchet, unknown axe, & broad axe head.
46._____ Unusual W. BUTCHER curved adz, VG.
47._____ Curved adz & unmarked single bit axe, VG.
48._____ Three Disston hand saws inc. one with finger hole.
49._____ Three panel-size hand saws; one has W.S.&M. button.
50._____ Two long miter box saws inc. Stanley R&L made by Disston & Sons, VG.
51._____ Two Henry Disston & Sons back saws.
52._____ Three Disston hand saws inc. VG No. 12.
53._____ Four saws inc. VG Atkins No. 401 with rosewood handle.
54._____ Unusual 30-drawer wooden storage bin.
55._____ Small wooden box with hand-cut dovetails, and intact lock.
56._____ Fine E.H. SARGENT CHICAGO balance-beam scales in wooden case
w/accessories, VG.
57._____ Three vol. set Appletons’ Cyclopedia of Applied Mechanics, hard bound, VG.
58._____ Four vol. set Knight’s Mechanical Dictionary, hard bound.
59._____ Three Stanley wood levels VG to FINE.
60._____ Bostrom surveyor’s Model #2 builder’s level in original wooden box, VG.
61._____ Helb American Combined Level & Grade Finder, inclinometer level, Railroad
York County Penn.
62._____ Williamsburg 12-inch cast iron level with fancy fillegre casting, VG.
63._____ Keuffel & Esser brass surveyor’s transit w/compass, VG.
64._____ Unusual surveyor’s MERIDEN FINDER patented Nov. 2, 1880, VG.
65._____ Unusual Cheney adz hammer & hand vise with wooden handle.
66._____ FINE plated JAMES HOWARTH SHEFFIELD brace.
67._____ Fine Ohio Tool Co. No. 82 set of match planes for tongue & groove work.
68._____ Stanley BEDROCK #605 flat-sided jack plane, VG.
69._____ Winchester corrugated 9-inch smooth plane, VG.
70._____ Ohio Tool Co. #04C & 03C smooth planes; the 03C has corner chip.
71._____ Stanley #203 adj. block plane, VG.
72._____ Lot of four axe handle templates from wagon shop in Femme Osage, Mo. & lot
of measuring sticks with advertising.
73._____ Unusual NASH patent saw set plus original 1912 letter from the James Ohlen
Saw Mfg. Co. of Columbus and a board-foot calculator also from Ohlen.
74._____ Lot of four hand saws.
75._____ Jig saw with iron base and flywheel, needs power supply.
76._____ German two-speed hand-cranked bench drill, made in Germany.
77._____ Millers Falls bench-mounted drill press, VG.
78._____ Davis Patent 24-in. cast iron level by M.W. Robinson, VG; plus Cook’s Patent
29 3/8-in. plumb & level.
79._____ STANLEY’S HAND-Y N0. 90 plumb & level in original pasteboard box, box
fair, level VG.
80._____ Large Millers Falls bench-mounted hand-cranked drill press with vise, VG.
81._____ JOHN P. FOX ST. LOUIS revolving nail caddy.
82._____ Cast iron sharpening stone holder marked SHEPARD HARDWARE CO.
PATENTED NOV 12 DEC 17, 1878, BUFFALO N.Y.
83._____ Pair ST. LOUIS wood planes: ADOLPHUS MEIER & CO. w/radiused bottom;
& SHAPLEIGH, DAY & CO. screw-arm sash.
84._____ Three ST. LOUIS wood planes: A.R. EARL hollow; HUNT & WISEMAN side
bead; & A. MEIER & CO. side bead.
85._____ Three ST. LOUIS wood planes: A. MEIER & CO. center bead; J.
DONALDSON reworked round; & WILSON & BROS. fixed twin-iron sash, missing one
blade & wedge.
86._____ Three ST. LOUIS wood planes: HUNT & WISEMAN hollow; M&NH STOUT
round; & JULIUS, MORISSE & CO. grooving plow.
87._____ R.W. BOOTH CINCINNATI, O. handled screw-arm plow plane.
88._____ Five A.J. CHILD MERCANTILE ST. LOUIS tags.
89._____ Unusual E&T RING, WORTHINGTON, MS double side bead plane.
90._____ D.N. GARRISON, DAYTON, O. unhandled plow plane, replaced wedge.
91._____ C. SAPP, RAVENNA, OHIO, complex molding plane, VG.
92._____ Pair plumb bobs inc. brass bob marked RULETA Co. INC. N.Y. U.S.A.
93._____ Griffin Patent (June 5, 1883) hack saw, VG.
94._____ Johnson Patent 20TH CENTURY brace/wrench, patented Dec. 4, 1894.
95._____ Coolidge Patent (No. 562,329) wrench attachment for braces, VG.
96._____ Lowentraut Mfg. brace/wrench combination tool, VG.
97._____ Stanley #A5 aluminum jack plane, VG.
98._____ Pair of block planes; Stanley #130 & Defiance No. 1245 both VG.
99._____ Stanley #A78 aluminum duplex plane, complete & VG.
100._____ Fine Stanley #55 combination plane in original tall pasteboard box, 100%
nickel plating, all 55 cutters in four cutter boxes. As good as they get.
101._____ Unusual Stanley 17-2 WWII era 9-inch smooth plane in original box, FINE.
102._____ Complete Stanley #248A Weatherstrip plane IOB with all seven blades,
103._____ Stanley HANDYMAN H1105 jack plane in original box, like new.
104._____ Pair wooden bench planes: HEATHCOTT SHEFFIELD (1829-1833) varient
of a groove plane: Thos. Gill badger plane, VG.
105._____ Early MADOX skew bladed panel raising plane with offset tote & wooden
depth stop.
106._____ JULIUS.MORISSE & CO. ST. LOUIS screw-arm plank plane, VG.
107._____ Pair snipe bill planes, faint maker's mark, VG.
108._____ Drawer bottom grooving plow GUARANTEED ENGLISH MADE, with
adjustable fence, VG.
109._____ GLEAVE MANCHESTER compass plane with adjustable boxwood nose
piece; OHIO TOOL Co. #30 toothing plane with THISTLE BRAND blade, VG.
110._____ G.&W.H. ROSEBOOM CIN-O. 3/4-in. match (tongue & groove) plane, VG.
111._____ Large pair Ohio Tool Co. No. 73 hollow & round molding planes.
112._____ Early T.LAKE T.BYE slip boxed side bead & early TRACY complex molder.
113._____ Pair OHIO TOOL CO. handled tongue & groove planes.
114._____ Unusual fireman's hatchet with strapped head & leather sheath, sheath needs
sewing.
115._____ Seymour Patent 15-inch twist handle wrench, VG.
116._____ Early ASHTON & JACKSON GERMAN STEEL hand saw w/split nuts, VG.
117._____ DISSTON & SON No.12 rip saw, two nuts replaced.
118._____ Early WHEELER, MADDEN & CLEMSON XLCR with split nuts, VG.
119._____ Two unusual wood planes: small coach maker's rabbet plane & spill plane.
120._____ Three wooden rabbet planes including one with Stanley #78 fence.
121._____ Continental screw-arm panel raising plane, VG.
122._____ Continental screw-arm plow plane, VG.
123._____ Five different American-made wooden jack rabbet planes all with different
pitch handles and/or widths, an instant collection.
124._____ John Weiss & Son Vienna, Austria screw-arm plow plane, VG.
125._____ Early, possibly 18th century, continental plow plane, VG.
126._____ Unusual J.HILTON shoot board type bench plane with skewed blade, VG.
127._____ Continental screw-arm panel raising plane, VG.
128._____ Continental panel raising plane with fence, VG.
129._____ Continental screw-arm plow plane, VG.
130._____ Two wood planes: one looks like a homemade dovetail; the other is factory
made by BERNIER and is used to form the edges of drop-leaf tables.
131._____ Ohio Tool Co. 28-in. razee-type jointer plane presented in 1955 and signed by
the entire sophomore class, boys & girls, a neat presentation plane.
132._____ Little used 26-inch rosewood jointer plane from a Buenos Aires, Argentina
maker, FINE.
133._____ Massive 25-inch handled jack rabbet plane with 3-inch blade, VG.
134._____ Two heavy iron prototype smooth planes, both are entirely hand made,
deserving of more research.
135._____ AJAX barn beam boring machine, complete and very good.
136._____ Ohio Tool Co. handled jack rabbet plane with unusual rear handle that’s
mounted to a steel base & can be tilted from side to side, possibly a patented feature, VG.
137._____ Pair of continental wood planes inc. horned smoother with adjustable fence.
138._____ Unusual cabinet scraper with laminated body and Stanley SW blade.
139._____ Unmarked rosewood fillester plane with adjustable fence on bottom, VG.
140._____ Two John Weis & Son horn planes inc. smoother & toothing, VG.
141._____ Three horn planes inc. smoother & scrub.
142._____ Two horn planes: scrub & scarce rabbeting with Sandusky blade.
143._____ Two horn planes inc. a smoother with rosewood sole & L&IJ White blade.
144._____ Pair of horn scrub planes.
145._____ Pair of mini horn planes; smoother marked GERMANY & compass with
WEISS & SON blade.
146._____ Lot of seven carving books: Tom Wolfe Carves Dragons; Carving Favorite
Songbirds by Anthony Hillman; Carving Totem Poles & Masks by Alan & Gill
Bridgewater; Burning and Texturing Methods by William Veasey; Carving Western
Figures by Harold L. Enlow; Whittlin' Bill's Folk Characters by Bill HIgginbotham; and
Ship carvers of North America by M.V. Brewington.
147._____ Lot of five woodworking books: The Art of Elegant Kitchenware by Tony
Lydgate; Creating Beautiful Boxes with Inlay Techniques by Doug Stowe; Making Wood
Handles, Hinges & Knobs by Alan & Gill Bridgewater; Making Small Wooden Boxes by
James A. Jacobson.
148._____ Lot of four woodworking books: Trim Carpentry Techniques by Craig
Savage; Measure Twice, Cut Once by Jim Tolpin; James Krenov Worker in Wood; A
Cabinetmaker's Notebook Krenov.
149._____ Lot of eight circa 1930 Modern Mechanics magazines.
150._____ Lot of four English/British crafts books: English Town Crafts by Norman
Wymer; British Craftsmanship published by Collins; English Fairs and Markets by
William Addison; British Craftsmen by Thomas Hennell; and a Directory of Sheffield by
Da Capo Press.
151._____ Lot of four FINE Wood Working publications: Fine Wood Working on
Marquetry and Verneer (2); Fine Woodworking on Things to Make; & Fine Wood
Working on Finishing and Refinishing.
152._____ Lot of four books on cabinetmaking: A Cabinetmaker's Notebook by James
Krenov; Bookshelves & Cabinets by Lane Publishing; Cabinets and Built-Ins by H.H.
Siegele; & Making Kitchen Cabinets by Paul Levine.
153._____ Lot of four books on engines & machines: Engines of Change by Brooke
Hindle and Steven Lubar; LIFE SCIENCE LIBRARY'S MACHINES; A History of the
Machine by Robert Soulard; and The Technology of Man by Cipolla and Birdsall.
154._____ Three misc. books: The Smithsonian - 150 Years of Adventure, Discovery,
and Wonder by James Conaway; To The City by John Y. Beaty (rough); & The Complete
Farmer compiled by The Main Street Press.
155._____ Three books: The History of American Business & Industry; The 50 Great
Pioneers of American Industry; DuPont The Autobiography of an American Enterprise.
156._____ Lot of two books & two magazines: Gristmills Of Early America And Today
magazine; Science: The Islamic Legacy magazine by ARAMCO World Magazine;
Cathedral, Forge, And Waterwheel Technology and Invention in the Middle Ages book
by Frances & Joseph Gies; & Moxon's Mechanic Exercises on the Whole Art of Printing.
157._____ Aldren A. Watson's HAND TOOLS - Their Ways and Workings book plus a
Trees to Tribunes booklet.
158._____ Nine woodworking books: 176 Woodworking Projects by the staff of
Workbench Magazine; Easy-to-Make Antique Furniture Reproductions by John A.
Nelson; Woodworking And Furniture Repair by The War Department 1946; 500
Woodworking Do-It-Yourself Projects; Wood Toys & Playhouses by Stevenson;
Collapsible Basket Patterns by Rick & Karen Longabaugh; Picture Framing & Wall
Display; Making Wood Signs; Wood Colors and Kinds by Dept. of Agriculture 1956.
159._____ Three cabinetmaking books: Designing, Building, and Installing Custom
Cabinets for the Home by G. William Scherer; The Home Cabinetmaker by Monte
Burch; and Cabinetry edited by Robert A. Yoder.
160._____ Four books: America Goes to Press by Louis Solomon; History of the YMCA
in North America by C. Howard Hopkins; Automation by Walter Buckingham; & The
History of Baker Perkins by Augustus Muir.
161._____ Seven books or booklets: Jigs, Fixtures, and Shop Furniture by Nick Engler;
Woodworking Techniques by R.J. DeCristoforo; Woodwork Aids and Devices by Robert
Wearing; Metalwork & Enamelling by Herbert Maryon; Cane Seats, Rush Seats & Rush
Seats by John K. Burch Co.; Best Ship Jigs by American Woodworker; How To Repair
Remodel Refinish Furniture edited by Arthur Wakeling.
162._____ Seven books: Reprint of 1888 Mott's Illustrated Catalog of Victorian
Plumbing Fixtures; Reprint of ca. 1876 Authentic Mid-Victorian Gas Lighting Fixtures;
Heebner & Sons Pioneers of Farm Machinery in America by Francis Blase, Jr.; European
Rooms in Miniature by Mrs. James Ward Thorne; The Derby Horse Railway And The
World's First Electric Freight Locomotive by Stevens; Cambridge Glass 1818-1888 by
Lura Woodside Watkins; Adam Silver [in the] Victoria & Albert Museum.
163._____ Two books: Industrial Revolution of the United States by Carroll D. Wright;
The Age of Invention by Holland Thompson.
164._____ Seven crafts books inc. People Who Make Things by Carolyn Meyer; Art In
America by Robert Myron and Abner Sundell; Early American Crafts and Hobbies by
Raymond & Marguerite Yates; Needlework Tools by Elanor Johnson; A Guide To
American Trade Catalogs by Lawrence B. Romaine; The Unknown Mayhew by Eileen
Yeo and E.P. Thompson; & Do-It-Yourself Coffins For Pets and People by Dale Power.
165._____ Four books: Illustrations Of Trades by Charles Tomlinson; Early Artisans by
Bobbie Kalman; Early Handwrought Ancestors by Marion Nicholl Rawson; & Pioneer
America - It's First Three Centuries by Carl W. Drepperd.
166._____ Three automotive books: The Company And The Union by William Serrin;
GM The First 75 Years Of Transportation Products; & ASIA Automotive Service
Industry Association The First Twenty-Five Years by Mike Greicus.
167._____ Audel's Carpenter's and Builder's Guide Vol. 1-4.
168._____ Six books on staining and finishing: Wood Finishing And Refinishing By
S.W. Gibbia; The Complete Book of Furniture Repair And Refinishing by Ralph Parsons
Kinney; Practical Furniture Refinishing by A.B. Pattou; The Modern Wood Finisher by
F. Maire; Wood Finishing by W.A.G. Bradman; & Wood Finishing Plain and Decorative
by F.N. Vanderwalker.
169._____ Four books: Men and Volts at War - The Story of General Electric in World
War II by John A. Miller; Elementary Studies in House Painting, Decorating and Paper
Hanging edited by F.N. Vanderwalker; Piano Tuning and Allied Arts by William Braid
White; & Interior Wall Decoration by F.N. Vanderwalker.
170._____ Seven books and booklets: Furniture in Print - Pattern Books From the
Redwood Library by Christopher P. Monkhouse & Thomas S. Michie; Benjamin
Franklin Electrician by Bern Dibner; The Spirits of '76 by Eric Sloan; The Colonial
Craftsman by Carl Bridenbaugh; Technology and the Frontiers of Knowledge; Midieval
and Early Modern Science Vol. I by A.C. Crombie; & Early Modern Science Vol. II by
A.C. Crombie.
171._____ Four books: Art And The Industrial Revolution by Francis D. Klingender; The
Better Mousetrap by Aaron & Cynthia Klein; Men of Science in America by Bernard
Jaffe; & Pleasant Hill And Its Shakers by Thomas D. Clark & F. Gerald Ham.
172._____ Eight woodworking books & booklets: Advanced Woodworking Projects by
Robert Lento; Making A Chair From A Tree by John D. Alexander, Jr.; Handcrafted
Shelves & Cabinets by Amy Zaffarano Rowland & William H. Hylton; Practical
Veneering by Charles H. Hayward; Veneering Simplified by Harry Jason Hobbs;
Marquetry & Inlay by Alan & Gill Bridgewater; Windsor Chairmaking by Michael
Dunbar; & How to Build Your Own Furniture by R.J. DeCristoforo.
173._____ Three woodworking books: Tools & Skills: Workshop, Plumbing & Wiring;
Oak Furniture Styles And Prices; The Router Book by R.J. DeCristoforo.
174._____ Five misc. books: Du Pont The Autobiography of an American Enterprise;
The Oilmen by Hollyman; Therapeutic Uses of Adhesive Tape by Johnson & Johnson;
The Abrasive Ages by William G. Pinkstone; & A Way of Life - The Story of the John
Burroughs School 1923-1973 by Parry.
175._____ Lot of tools used to do picture matting. See following lot for picture framing
tools. Start your own business with this lot and the one below.
176._____ Lot of Stanley picture framing tools: #100 Mitre machine like new with #39120 back saw plus original #100 rule and clamp, all fine to like new; plus #400 miter
vise, VG; and original Stanley Picture Frame Tools booklet.
177._____ Gerstner 3-drawer machinist-style walnut box for carving tools, VG.
178._____ Homemade tool chest with one tray & lid attached by graphic door hinges.
179._____ Antique Bausch and Lomb microscope in wooden box with locking door.
180._____ OLIVER No. 5 "Standard Visible" antique typewriter, VG.
181._____ Small suitcase full of misc. drafting tools, most in fine overall condition.
182._____ Two antique typewriters: THE SMITH PREMIER TYPEWRITER with
unusual key layout; and a Hammond model with characters on a revolving disc, very
unusual.
183._____ Pair of antique portable typewriters and stenograph machine: This lot included
portable typewriters by REMINGTON and CORONA as well as an old stenograph
machine like those used by court reporters. All are in their original cases.
184._____ Nicely made tin tool box with carrying handle on top and lockable clasp.
185._____ Lot of six tools inc. four small hammers; one offset screwdriver and one
mystery hammer-type tool.
186._____ Three hammers inc. two wooden handled claw hammers, claw hammer head.
187._____ Lot of two fencing hammers inc. a pitted Jacob's Patent plus an unusual pair
of plier-type tool with a open end wrench on top of top jaw.
188._____ Two cobbler's hammers: one by PLUMB with anchor logo and one USMC
(United Shoe Machinery Corp.) both VG.
189._____ Two combination hammers: Thayer Patent that is missing the wooden handle;
and another hammer/screwdriver combo with plastic handle.
190._____ Lindley Patent (U.S. Patent No. 441,879) combination stove lid lifter and
hammer, with replaced wooden handle, VG.
191._____ Three unusual tinner's? hammers with nice handles.
192._____ Three hammers inc. unusual nail holding claw hammer, one with a spike on
the back side; ball peen and cross peen head.
193._____ Three non-sparking hammers: claw hammer, small maul and peening, all VG.
194._____ Lot of four tinner's? hammers, all VG with nice handles.
195._____ Lot three hammers inc. glazers and a brass glass cutter, all VG.
196._____ Wood's No. 2 piggyback spoke shave with flat and concave faces, very goo.
197._____ Stanley #92 butt and rabbet gauge / gage complete and fine condition.
198._____ Stanley #71 router plane complete with 4 blades and throat closing
attachment, VG.
199._____ Stanley #79 double side rabbet plane MADE IN U.S.A. missing only one of
the screws that secures the fence, a former owner painted the stippled areas with red
paint, otherwise fine.
200._____ Stanley #65 low angle block plane with knuckle jointed cap, fine overall.
201._____ Unknown make #1130 double block plane (like Stanley #130) in fine overall.
202._____ Stanley Millers Patent #141 plow plane, has had a new handle installed,
repainted, some pitting on skate, fair.
203._____ BAILEY TOOL CO. #11 iron spoke shave with screw adjuster and battle axe
logo embossed on lever cap, no blade, very good overall.
204._____ Stanley #93 cabinetmaker's shoulder or rabbet plane, fine overall.
205._____ Large gunmetal router plane (Like Stanley #71) with wooden handles, fine.
206._____ Stanley #67 universal spoke shave missing one bottom and fence but
otherwise VG; and a Holzheimer Patent carving device IOB with extra blades.
207._____ Scarce Stanley #66 marking gage/gauge with brass faces on both sides of
head, head marked STANLEY, very good overall.
208._____ Stanley #192 rabbet plane & Stanley #78 rabbet plane, both complete and VG.
209._____ Stanley #12 1/2 cabinet scraper, needs blade, usable condition.
210._____ Three Stanley router planes: two #71 1/2 and one #71, all VG.
211._____ Pair block planes: early Stanley #110, complete and VG; and Stanley #118
malleable iron block plane missing the adjusting screw, good overall.
212._____ RARE B Plane #4 1/4 with adjustable throat, very good tote and knob, good
original cutter with patent date, corner of throat chipped, VG.
213._____ Lot nine wrenches: unusual Pazzano piers; adjustable alligator; 9-inch auto;
double ended alligator and a ratcheting Waldon #4564-2 for use on Ford brake and
reverse bands.
214._____ Six Crescent-type wrenches inc. three Robinson and 6-inch Bemis and Call.
215._____ Lot six ratchet wrenches inc.
216._____ Lot of 25 misc. wrenches.
217._____ Lot nine wrenches inc. three 6-inch wood handled nut wrenches; two 6-inch
woood handled pipe wrenches; dog bone; alligator, etc.
218._____ Double ended 8 to 10-inch Crescent wrench & six 4-inch Crescent-types, VG.
219._____ H.D. Smith "PERFECT HANDLE" 12-inch nut wrench, fine.
220._____ Set Frank Mossberg socket wrenches and ratchet in original wood box, VG.
221._____ Lot of eight tool or trade specific items: jar embossed ILLINOIS
WISCONSIN GLASS PROTECTIVE LEAGUE, JUNE 4-5, 1982, STREATOR, ILL;
Sheet Metal Workers Local 36, International Assoc. belt buckle and 5 carpenter and
jointers union year pins, all VG.
222._____ Lot three bit braces: One with unusual chuck; Scotch brace from Glasgow;
and penny brace, all VG.
223._____ Three braces: Two all iron bit braces and an iron automotive-type wrench
brace, all VG.
224._____ Four wall hanging copper trade plaques: COPPERSMITH; CARPENTER:
SHOEMAKER; and PRINTER, all like new.
225._____ Box of 6 different corn cob pipes in original box made in Washington
Missouri by Buescher's, salesmen's sample, VG.
226._____ Small child or toy-size sewing machine complete with original clamp, nice
original paint, fine overall.
227._____ Large old pair of scissors or shears, VG.
228._____ Large lot of mini screwdrivers, included are three nested sets.
229._____ Unusual compass by W.S. Darley and Co. Melrose Park, ILL. IOB.
230._____ Two Brown and Sharpe plumb bobs in nice fitted wood box.
231._____ Lot of 3 farm tools: bull lead; Hurd's Patent 1862 Hog-Snout cutter; and a
patented hog holder, all VG.
232._____ Hand forged tire bolt wrench, VG.
233._____ Three decorative wall hangers: Barn scene with horse and buggy and two
brass pieces one with two eagles, the other with a Masons' symbol.
234._____ Three small antique measuring cups, the largest is a tin pint and has
advertising on it; the smaller two are copper.
235._____ Two copper funnels, both VG.
236._____ Lot of three hand vises inc. to Alford's patent and two different tool handles
one with rosewood handle.
237._____ Lot three screwdrivers: Yankee ratcheting and two A.H. Reid patent spiral
screwdrivers inc. scarce #2 size.
238._____ The George Washington Door Stop by Newton Mfg. Newton, Iowa.
Aluminum hatchet with wooden handle, VG.
239._____ Millers Falls No. 902R Micrometer Caliper in original wooden box with paper
label, VG.
240._____ Pair of Stanley #45 combination plow planes for parts or restoration.
241._____ Stanley #12 1/2 cabinet scraper with rosewood bottom, missing three of the
screws that secure the rosewood bottom and there's no blade, will still make a good user.
242._____ BAM (Blacksmith Association of Missouri) Newsletters 1997 to 2000, total of
26 volumes, all VG.
243._____ SWTCA Southwest Tool Collectors Association club newsletters 1985 to
1991, total of 20 issues, all VG.
244._____ Antique Woodworking Power Tool Association Newsletters 1989 to 1991,
long defunct group, very collectible, total of eight issues, all VG.
245._____ Lot of Martin J. Donnelly antique tool catalogues rare and early tool reference
books from 1993 to 2002.
246._____ EAIA first 50 years of Chronicle Newsletters bound into two volumes.
Volume 1 covers 1933 thru 1958 and Vol. 2 covers 1959 thru 1973. Volume I has a
creased spine. Both are otherwise complete and in very good overall condition.
247._____ Ten original indexes to the EAIA Chronicle Magazine from 1933 thru 1993.
248._____ Missouri Valley Wrench Club Newsletters 1987 to 2004 plus four
membership rosters 1996, 1999, 2000 and 2001. All VG.
249._____ THCKK The Hardware Kompanies Kollectors Klub Newsletters for collectors
of Keen Kutter, Bluegrass, Diamond Edge, OVB, etc. Approx. 34 issues plus several
THCKK auction catalogs.
250._____ Plane Talk Newsletters 1979 to 1991 by E. Pollac. These were done prior to
the release of his American Wooden Planes series of books.
251._____ The Imp newsletters by Roger K. Smith approx. 1980 to 1986. The research
that went into these newsletters was the basis for the PTAMPIA books that Smith
subsequently published.
252._____ The Catalog of American Wooden Planes newsletters and its Sign Of The
Jointer successor publication 1994 to 2001. Nice research into previously unknown or
new marks on planes.
253._____ Twelve assorted tool sale lists and auction catalogs. Nine lists of William A.
Gustafson; one 1997 Tony Murland International catalogue and Hans Brunner Auctions
No. 4 and 5 1998. All complete and VG; plus a new History of The Can Opener Book by
Alfred Wood published 2008.
254._____ MWTCA Gristmill Magazines from 1993 to 2008. All complete and VG.
255._____ MWTCA Gristmill Magazines from Vol. 1, No. 1 in 1974 to 1992. Buy this
lot and the one above and you've got the entire run. One or two have cover creases
otherwise all are fine.
256._____ EAIA Shavings newsletters 1983 to 2008, not a complete set, but quite a few
are here, all complete and very good.
257._____ Fine Tool Journal Publications Fall 1995 to Summer 2008. All like new.
258._____ Iron Horse Antiques and it's successor publication Fine Tool Journal 1972 to
1990. This an almost complete set of early Iron Horse publications.
259._____ Fine Tool Journal publications Winter 1991 to Summer 1995 (just prior to the
use of color on the covers), all in very good overall condition.
260._____ EAIA Chronicle magazines March 1993 to March 2005 and two issues from
2008. All in fine overall condition.
261._____ EAIA Chronicle magazines March 1978 to December 1992. All in very good.
262._____ Bridge Tool Co. tool catalogs 13 different issue in all, VG.
263._____ The Plumb Line publication dedicated to plumb bob collecting published by
R. Bruce Cyner of Ft. Wayne, Ind. Complete set of 16 issues. All VG.
264._____ Nice handled ripping gauge.
265._____ Fine Connecticut-style hand adz with oak? handle and marked blade.
266._____ Wood and brass stale engine for making round tool handles.
267._____ Three wooden scales including a 22-inch wooden rule made by M.
DAVIDSON N.Y. also marked REED and AUERBACH BOWERY NEW YORK; a
LUFKIN 8152 tailor's rule; and another tailor's rule by WOLLEY and CO. CHICAGO.
268._____ Keuffel and Esser Co. Mannheim Slide Rule IOB, this auction is for a very
nice Keuffel and Esser Mannheim slide rule that comes in 1/2 of the original box and
comes with the original circa 1920 instruction booklet.
269._____ Lot of miniature tools and misc. tool related items inc. little Keen Kutter pin
back button; mini Crown Tools rosewood handled bevel; two small sets of wrenches;
scissors; etc.
270._____ Ohio Tool Co. #101 handled screw-arm plow plane with an Ohio Tool Co. 1/2
center bead hanging off the right side, plane has a few thread chips, is otherwise VG.
271._____ SCIOTO TOOL CO. wooden jack plane with good Millers Falls iron jointer
gauge/fence.
272._____ Pair complex profile molding planes inc. VARVILL and SON YORK, both
complete and VG.
273._____ OHIO TOOL CO. No. 54 moving fillester plane, complete and fine.
274._____ Wheelwright's jarvis or shave for rounding spokes etc. This one has a steel
bottom and is in very good overall condition.
275._____ Unusual brace-type screwdriver and Stillman's patent saw set.
276._____ Like New BLUEGRASS HARDWARE shears with nice etching on blade;
plus a like new push drill with rosewood? handle, fine.
277._____ Reprint of a circa 1913 BUFFUM TOOL CO. Catalog. Buffum operated in
Louisiana Missouri and used an old Indian good luck symbol as their trademark. Included
with the catalog is a screwdriver that may have been made by Buffum, as it has the same
symbol stamped into its shaft.
278._____ Four different flashlights inc. CHALLENGE; EVEREADY; RAY-O-VAC;
and DIAMOND.
279._____ PURINA cloth measuring tape used to measure livestock & predict weight.
280._____ JIFFEY CORN SHELLER, hand held iron corn sheller, complete and very
good; plus a large pair of dividers and three brass greasers?
281._____ Four reproduction watch fobs: three Keen Kutter and one KRIT MOTOR
CAR COMPANY, all are like new.
282._____ Two brewer's-type thermometers in wooden holders; plus two small pocket
knives made in Germany and having assorted tools embossed into the handles, all fine.
283._____ Four old tool booklets: Two Stanley pocket tool catalogs; one Stanley Rafter
and Framing Square booklet.
284._____ ARKANSAS TOOTHPICK by WINN sheath knife with leather sheath, VG.
285._____ MARBLE'S folding knife in original box with zippered pouch, fine.
286._____ Case XX 6333SS BUTTERNT RD JDG #03971 collector's knife IOB.
287._____ Three copper commemorative coins inc. 1931 Cyrus McCormick inventor of
the reaper; 1977 Small Business coin with a blacksmith on the front; and Hardware
Retailer Magazine.
288._____ Bag of Italian 50 Lira coins, all featuring a nude blacksmith swinging a
hammer, will make great jewelry like cufflinks for your blacksmith group.
289._____ Seven different United States proof sets of coins: 1976, 1977, 1978, 1979,
1980, 1981, & 1982.
290._____ Seven United States proof sets of coins: 1976 (2); 1979 (3); 1981 & 1982.
291._____ Seven United States proof sets: 1976, 1977, 1979 (2), 1981 & 1982 (2).
292._____ Three commemorative bank notes printed by the Bureau of Engraving for the
American Numismatic Association Conventions in Washington, D.C. (1971); New
Orleans (1972); & Boston (1973).
293._____ Bayonet USM7, for a 1960's M-16 rifle, with original sheath, VG.
294._____ Case 6185SS Doctors Brnt Antio #03535 collector's pocket knife IOB.
295._____ Case 6282SP SS Baby Dog Jade #01222 collector's pocket knife IOB.
296._____ Case 3185CV Doctors Yellow #00119 collector's pocket knife IOB.
297._____ Box of three old paint cans and four brushes from the 1930s thru 1950s,
includes horsehair brush.
298._____ Justrite carbide light with can of Union Carbide "Miners Lamp" calcium
carbide fuel.
299._____ Guy's Dropper carbide miner's lamp/light with can of calcium carbide fuel.
300._____ AUTOLITE carbide miner's lamp/light with can of calcium carbide fuel.
301._____ Shanklin Mfg. Springfield ILL carbide miner's lamp/light with a 2-lb. can of
Shawinigan calcium carbide.
302._____ AUTO LITE by Universal Lamp Co. carbide miner's lamp/light with 2-lb. can
Union Carbide calcium carbide fuel.
303._____ NEW WHITE POWDER WONDER 12 gage single-shot breach loading
shotgun with 32-inch barrel, gun is tight and not all shot out, just needs a good cleaning.
304._____ Dark oak Sessions "bim bam" wall clock.
305._____ Rosewood wall clock "figure 8" door, needs repair.
306._____ Ansonia oak kitchen clock, needs to be reassembled.
307._____ Large lot of clock & watch repair tools: staking set; hand removal tool; two
stem wresting tools; pin vise, etc.
308._____ Large lot of clock and watch repair books and parts catalogs.
309._____ Two 1920s Emerson electric fans, one is D.C., and one has "ball" motor, both
need blades and guards reinstalled, and both need serious cleaning.
310._____ Lot of 11 old woodworking tool catalogs.
311._____ Large lot missels and rockets magazines circa 1960, contains lots of early
industry advertising.
312._____ Two David E. Heckel tool books: Sargent Planes & Stanley #45 combination
plane, both in fine original condition.
313._____ Parker Brothers JACK STRAWS game IOB.
314._____ Glass dome full of shredded American currency.
315._____ Nice wooden tote and Goldblatt patent Angle Plane used by plasterers.
316._____ Walnut dovetailed box.
317._____ Old beat-up wooden machinist tool chest with drawers that the owner said
came off the U.S. Battleship Missouri where it had been used in the machine shop.
318._____ Boxes of lead letters that came out of a pattern shop in Ferguson Missouri.
319._____ Patented "T" auger and unusual double sided saw.
320._____ Two St. Louis fore or jointer planes inc. BAILEY & RICHARDSON that
needs new handle.
321._____ Fine Stanley #7C jointer plane; & VG Stanley #5 jack plane.
322._____ Lot of six Sandusky & Ohio Tool Co. wooden dado planes.
323._____ Pair Mathieson & Son 1-inch tongue & groove planes.
324._____ Matched set 7/8-inch tongue & groove planes.
325._____ Matched set 5/8-inch tongue & groove planes.
326._____ Three St. Louis Missouri wooden planes: Chip-A-Way 8-inch smoother; Geo.
A. Rubelmann 8-inch smoother & Child Pratt & Co. screw-arm plank plow.
327._____ Five 1986 United States First Day covers devoted to Woodcarved Figurines,
plus an early valentine post card depicting a cherub in a blacksmith shop, and an 1800s
trade card for Leibig's Fleisch Extract with German text.
328._____ Old time sled and ice skates.
329._____ Dandy Pencil Sharpener, complete and VG.
330._____ Three U.S. Military medals in original boxes with original ribbons.
331._____ AMES TOOLS advertising piece commemorating '49 California Gold Rush.
332._____ Large lot of Keen Kutter, Diamond Edge, Shapleigh and OVB pocket knives,
all need work or have shortened blades.
333._____ Pair St. Louis, MO wooden molding planes: Hall & Hynson round &
Adolphus Meier hollow.
334._____ Pair St. Louis, MO wooden molding planes: J. Donaldson & J. Hall & A.
Meier & Co. 1/4-inch side beads.
335._____ Pair St. Louis, MO wooden molding planes: F.E. Schmieding & Co. 3/4-in.
boxed side bead & Shapleigh, Day & Co. tongue cutting 1/2 of a T&G set.
336._____ Pair wooden molding planes: 119 N. Main St. Louis 5/8-in. boxed side bead &
unmarked wooden sash coping plane.
337._____ J. Donaldson & J. Hall boxwood screw-arm plow plane, VG.
338._____ Three St. Louis wooden planes: Hunt & Wiseman 1 1/2-inch rabbet & 7/8-in.
plow & Shapleigh Day & Co. 1/2-in. plow.
339._____ Two St. Louis planes: Child, Pratt & Co. 1 1/4-in. nosing & Geo. A.
Rubelmann Hdwe plow.
340._____ Three St. Louis wooden planes: Hunt & Wiseman #2 & #6 rounds &
Shapleigh Day & Co. 1-inch rabbet.
341._____ Matched set Sandusky 3/4-inch tongue & groove planes, VG.
342._____ Matched set 3/8-in. tongue & groove planes, makers name overstruck, VG.
343._____ Matched set Auburn Tool Co. 1/2-inch tongue & groove planes, skate of
grooving plow has some rodent chewing damage on rear, will not affect functioning.
344._____ Two children's tool boxes, one with tools.
345._____ Two Shelton planes: 9-inch IOB and malleable or unbreakable block plane.
346._____ Craftsman electric scroll saw.
347._____ Zippo tape measure IOB and BLUE GRASS brass hose nozzle.
348._____ Ring of large brass keys.
349._____ Two DAISY BB guns: models 39 & 80.
350._____ AH-000-GAH car horn IOB.
351._____ Fine English toothing plane & brass-faced scraper.
352._____ Misc. antique collectables, photos, paper items, etc.
353._____ Thirty (30) box lots of tools and antiques to be sold individually.
354._____ Traditional woodworking work bench with Ohio Tool Co. wooden screw vise.
355._____ Two bench mounted grinders; one by KEYSTONE plus a sickle bar grinder.
356._____ MOUND CITY (St. Louis) brace plus three spoke pointers.
357._____ Yankee No. 1555 ratcheting, reversible, multi-speed breast drill, FINE.
358._____ Wooden auger handle with collet-type chuck & two raft augers plus one T
auger with crude wooden handle.
359._____ Lot inc. bench arbor & Luther hand cranked grinder.
360._____ James Bee plated Sheffield brace with one J. Bee center bit.
361._____ Four saw tools inc. Stearns saw vise & Buller Saw Set.
362._____ Four coping saws one with spare pack of blades plus a BRANCH, CROOKES
& CO. hack saw with logo nicely etched into frame.
363._____ Four saw tools inc. two saw sets.
364._____ Lot of four drawknives inc. one with curved blade marked READ. Two need
new handles.
365._____ Lot of three drawknives inc. L&IJ White and one with adj. handles.
366._____ Five wrenches: one marked VULCAN PLOW 95; CYLINDER STUDBATTERY NUT-SPARK PLUG-GEN. NUT 90257; IH G3172...
367._____ Four implement wrenches inc. OLIVER CP245 & two ignition type wrenches.
368._____ Lot of five wrenches inc. DELAVAL & a clevis with a wrench for a pin.
369._____ Three different pipe wrenches and two nut wrenches.
370._____ Lot of three saws, one marked HILGER and good pair of shears.
371._____ Mixter Patent (July 2, 1889) hand cranked saw gummer.
372._____ Pair cooper's tools: nice patented bung auger & hoop driver.
373._____ Craftsman Future Antique Collection wood screw NIB.
374._____ Goodell Improved combination treadle lathe, jig saw & table saw, treadle is a
modern copy of an original, bed not shown in photo but is included, needs to be
assembled.
375._____ W.F.& John Barnes No. 5 pedal powered screw-cutting lathe, pedals &
flywheel missing, intact bed, headstock, yoke & tool post, center rest and tail stock, good
for parts or a great start to a restoration project.
376._____ Large foot operated grinding wheel in wooden frame.
377._____ Luther pedal operated grinder.
378._____ Millers Falls treadle jig saw No 687, needs round belt & new wooden pitman
arm, VG.
379._____ Schnitzenbank used in 1870s on a German farm in Southern Illinois.
380._____ H.J. Boyce Fayette, Ohio blacksmith's kick vise Pat. April 28, 1896.
381._____ Foot operated power wheel used by dentists, jewelers, etc.
382._____ Brecht Patent (June 16, 1868) St. Louis hub boring machine.
383._____ Reynolds Patent tire bolting machine Pat. Nov. 8, 1898, Marion, Indiana.
384._____ W.F. & John Barnes foot powered mortising machine with wooden spring.
385._____ W.F.& John Barnes screw cutting lathe for parts. Included are a headstock, 4jaw chuck, carriage; tailstock and bed.
386._____ Reproduction seat bracket for W.F.& John Barnes lathes, very good.
387._____ Assorted bits for Barnes mortising machines (choice)
388._____ Pexto tinner’s stake plate.
389._____ Large tinner’s anvil.
390._____ Pexto No. 502 tinner’s grooving machine.
391._____ Early tinner's anvil.
392._____ Lot of automotive tools inc. lug wrench; grease cup tool; spark plug gapper;
two valve lapping tools & a valve facing fixture.
393._____ Lot of 11 wrenches & pliers inc. a Cochran Patent by M.M. BUCK (St.
Louis), Boos Tool Co. K.C. MO. & a Bridgeport Radio-Lectric No. 442.
394._____ Pair of Bridges Patent (No. 2,098,856) meat tenderizers Independence,
Missouri plus an unmarked ice plane or shaver.
395._____ Lot misc. iron tools inc. Fantayne 1868 Patent treadle, small vise, five screw
clamps; dibble, etc.
396._____ Hand cranking chain-driven bench mounted grinder, VG.
397._____ Lot of five die stocks by makers such as KING, HOLROYD &
BUTTERFIELD.
398._____ Lot of four die stocks and one large "LITTLE GIANT" tap handle.
399._____ Lot of four die stocks including a D.Saunders' Sons Pat'd April 25, 1856.
400._____ Three hand drills including Stanley #610; Yankee #1430 & Goodell Pratt.
401._____ Woods Patent hollow auger, two dowel pointers & three tapered reamers.
402._____ Lot inc. tapered bung or hub reamer; drawknife; shears; six screwdrivers, two
saws & soldering iron.
403._____ Four hammers including unusual blacksmith's-type rounding hammer plus one
claw and three ball peen hammer heads.
404._____ Hand cranked band-saw setting machine made by A.E. Cunningham
Worcester, Mass. & a Dietze Patent (No. 1,348,270) hand-cranked banding machine.
405._____ Three nut wrenches inc. Baxter & Vandegrift patents plus three pipe wrenches
inc. one by Roberts Wrench Co. The top one needs work.
406._____ Keen Kutter lathing hatchet; pliers and shears, VG.
407._____ Keen Kutter hatchet shears and hatchet head plus a Diamond Edge pruning
shear, all VG.
408._____ Five assorted plier-type tools inc. tin snips; nippers and BELL SYSTEM
crimpers, all VG.
409._____ Two hatchets plus a hoe, adz & broad axe that all need de-rusting and new
handles.
410._____ G.N. Stearns & B.S.V.& CO. spoke pointers and two diestocks used in braces.
411._____ Six plumb bobs: one brass, one nickel plated, & three iron and one steel.
412._____ FINE E.C. Stearns & Co. jointer fence for bench planes.
413._____ Stanley 7C joiner plane, and #51 spoke shave body.
414._____ Three threshing machine cylinder-tooth straighteners and wrenches; one
marked 1088R and another 805.
415._____ Four blacksmith's hammers inc. Heller square end; and ATHA 1/2-in. top
swedge.
416._____ Six different blacksmith's hammers inc. unusual diagonal peen.
417._____ Small traditional shaped tool chest with hand-cut dovetailed construction,
folding iron handles on both sides, inside measures 20 X 10 X 9-inches, VG.
418._____ Three blacksmith's hammers; 2 marked WARREN 7/8 & one marked 3/8.
419._____ Five different blacksmith tools including one to hold crucible and crucible is
included.
420._____ Seven different blacksmith tongs
421._____ Four different blacksmith tongs plus a fire poker.
422._____ Four blacksmith tools inc. BRIDGE TOOL (St. Louis) pincers; long tongs and
two coal or ash shoves, one needs new scoop.
423._____ Four different blacksmith's tongs.
424._____ Carpenter's tool box with fold down lid and inside drawer; with assorted tools
including zig zag rule; mini block plane, two keyhole saws, brace, claw hammer, etc.
425._____ D.R. BARTON carriage maker's drawknife and two mallets, one with nice
burl head.
426._____ Unusual vise plus two mystery tools, the bottom one may be a disc sharpener.
427._____ Lot misc. tools: blacksmith-made tooth straightening tool for threshing
machine teeth; hand forged grappling hook; Crescent brass cement edging tool, etc.
428._____ Three saws: Disston Keystone back saw; Swedish? keyhole saw & George
Bishop brass-back dovetail saw.
429._____ FINE Millers Falls No. 2 hand drill plus assorted bitstock tools inc.
screwdriver bits, countersinks, center bits, spoon bit, etc.
430._____ Traditional-style carpenter’s tool box with fold down lid & inner drawer,
needs new top handle, and side is cracked and needs to be glued.
431._____ Small tool box, 2 corner chisels, 11 chisels, Keen Kutter gouge, square etc.
432._____ Block knife with forged staple formerly in the Dr. George Murphy collection.
433._____ Nice medium sized carpenter's tool chest, genuine dovetailed construction,
folding iron handles on ends, intact lock (no key), inside measures 28 X 10 X 7.5-in.,
VG.
434._____ Electric Champion Forge & Blower Co. drill press flat belt drive, needs belt.
435._____ Snap-On collectibles: 10 glass glasses shaped like sockets & 13 plastic cups &
mugs with calendar girls.
436._____ Stump and plate anvils.
437._____ All-wood "maiden" tamping tool used on roadways in England.
438._____ Pair of unusual long-handled edging shovels?
439._____ Unusual wood framed saw ex. Doctor George Murphy collection. and
440._____ Orrin W. Burritt 1882 Patent (U.S. No. 266,604) double seaming machine for
sheet metal roofing, VG.
441._____ Pair manufactured threshing machine cylinder tool wrenches inc. Minnesota
Threshing Machine Co. #X899.
442._____ Pair of alligator wrenches inc. HAWKEYE double ended with three dies in
the middle of the handle & a J.H. Williams No. 2 BULLDOG with C.C.C. railroad logo.
443._____ Lot automotive type wrenches inc. T-handle socket wrench.
444._____ Lot of assorted bitstock tools inc. BLUEGRASS screwdriver bits plus seven
H. HAWKE center & spade bits.
445._____ Stanley #7C jointer plane VG, plus a body for a Stanley #51 spoke shave.
446._____ Three mortising chisels, 1 gouge & 1 Diamond Edge butt chisel, 3 need
handles.
447._____ Five tractor or implement wrenches including International M231; Empire
Plow A370; Stoddard/Pitman #M55, one homemade.
448._____ Five blacksmith's punches, all VG.
449._____ Three blacksmith tongs for holding round work, smallest one by
CHAMPION.
450._____ Lot blacksmith tools: Three tongs and two coal shovels, one needs new pan.
451._____ Lot blacksmith tools: tongs, clamp etc.
452._____ Lot five blacksmith hammer heads: flatter, two swedges, etc.
453._____ Lot of seven blacksmith tools: flatter hammer; coal shovel; three tongs, one
for round work; and two hammers with punches.
454._____ Large cast iron wheel trough used to soak wooden wagon wheels in oil, to
preserve them.
455._____ Small iron trough for soaking smaller wooden buggy wheels.
456._____ Large tool for de-horning cattle.
457._____ Pair Ford Model A and Ford Flat Head V8 valve tools.
458._____ Jarecki 1873 Patent unusual screw adjust pipe wrench or tong.
459._____ Wooden wagon jack from St. Louis Mo. hardware store.
460._____ Barn beam boring machine, folds down for easy storage, very good.
461._____ Unusual vise mounted, hand cranked armature lathe MADE IN U.S.A.
462._____ Three unusual tools: unusual pruning saw (needs handle), cast aluminum
emasculating tool, and an unusual tool marked THE AUTO TIRE RETREADER CO.
ROCKFORD ILL.
463._____ Millers Falls #210 drill press, hand crank replaced with pully for use with a
motor.
464._____ Dosch Patent (653,794) miter trimming machine, complete, no damage or
missing parts, has light surface rust, but will clean to very good overall condition.
465._____ Stanley #45 plane parts: Two main frames with slitter, sash cutter, depth and
beading stop, both very good plus one fence (no knob); a broken Stanley #78 frame; large
cooper's spoke shave that needs new wood handles & a wooden coachmaker's router
missing blade and wedge.
466._____ Pair of NOS auger handles: Millers Falls No. 2 & V.B.I. PHILA. PA No. 2;
plus three handled scrapers inc. an E.C. Stearns adjustable.
467._____ Three augers and a James Swan auger handle.
468._____ Clamp for installing floorboards; 20-inch L.S. Starrett caliper; and ice
chipping tool?
469._____ Set of RAY sockets and speed wrench by the Packer Auto Specialty Co.
Chicago; plus an adjustable ring groove cleaner.
470._____ Two valve lapping tools one with rack and a Snap-On tappet adjusting tool.
471._____ Lot: two pry bars; C.S. Osborne grommet installing tool IOB; chain breaker;
inside/outside caliper; clamp for a saw vise; and a dinglestock-type anvil.
472._____ Lot eight wrenches inc. TRIMO pipe wrench.
473._____ Lot: wood handled scraper, Akron Brass Mfg. hydrant wrench.
474._____ Lot three wrenches: BARNES TOOL CO and WAKEFIELD pocket
wrenches; Wizard No. 9 nut wrench and FOOTPRINT pliers made in England.
475._____ HEAVY railroad track bending tool, bring a truck and two or three stong lads
to help you load it.
476._____ Hand cranked chain-driven drill for drilling railroad tracks to electrify them.
477._____ Lot of railroad track tools: pry bar for spikes; track gague/gage; and track
moving bar, the small item that looks like a wrench is also used in prying up spikes; all
are iron and all are heavy.
478._____ Two different tools used in pulling railroad spikes, the one shown with the
spike was likely used with one of the pry bars in lot 477.
479._____ Bemis and Call WABASH Railroad 15-inch screw-adjust nut wrench, fine.
480._____ Lot: two pocket wrenches including a BARNES TOOL CO.; a rack and cam
adjusting plier Made in Germany; a Wizard #19 nut wrench and an unusual plier with a
glass cutter in one jaw.
481._____ Bell Systems hand-cranked swedging tool for cables.
482._____ John Byrne Sharon, Wis. March 13, 1888 patent tire-bolt wrench.
483._____ Shoe or bootmaker's double lasting tool and a leather fillet cutter.
484._____ Stanley #46 skew bladed plow plane, fine late model plane with 10 original
cutters, needs only front and rear depth stop and slitter to be complete, in fine owner
made wooden box.
485._____ Large iron saw set and a sharpening stone in an unusual wooden holder.
486._____ Two shingle froes: 8-inch and 12-inch blades.
487._____ Lot of 36+ leather decorating tools including a masons symbol; two hands
shaking, etc.
488._____ Lot of seven wrenches including unusual DIXIE ST. LOUIS combination
with ratchet, screwdriver & box end, ratchet not functional; SH AUTO KIT open end,
etc.
489._____ Lot inc. BF GOODRICH ratchet wrench; Stanley 7/32-in. ignition wrench
marked TAIWAN; nippers; and unusual combination tool with screwdriver end.
490._____ Three W&B alligator wrenches inc. TWIN double ended; all VG.
491._____ GERMANTOWN HAMR'RENCH combination lug wrench, tire tool &
hammer by Griffith Tool Works, Philada, Penn., VG.
492._____ Two unusual hammers: one is a macadamizing hammer for making small
rocks for paving roadways.
493._____ Lot of Popular Mechanics tools inc. adjustable wrench, two screwdrivers, and
two combination wrenches.
494._____ Eight magnetic tools inc. two Snap-On combination wrenches; two B-52
Superatchet 3/8-in. ratchets; 1/4-in. Superratchet; the Snap-On G0EX-120 & OXI-10
wrenches show up on a F-16 fighter plane tool list.
495._____ J.A. THOMPSON ratchet wrench/brace with box of different sized sockets.
496._____ NICE pedal powered LUTHER GRINDER from Milwaukee Wis. This one is
fine but the new owner will need to drill a hole in the frame to secure the bottom of the
seat bracket. It doesn't appear to have ever been drilled. A fine tool and little used
condition.
497._____ W.F. & John Barnes pedal powered No. 2 Velocipede saw, painted battle ship
gray, one spot on frame below table appears to have a welded repair, and the table is
replacement made from the floor of a tractor trailer, can easily be restored to usable
condition, very good overall.
498._____ W.F. & John Barnes foot powered mortising machine, partially repainted in
battleship gray, one bit included, very good overall condition.
499._____ Companion combination treadle lathe and scroll saw, appears to be complete
and original, VG.
500._____ W.F. & John Barnes pedal powered former with drawer under table for bit
storage, one original cutter included, very nice overall condition.
501._____ W.F. & John Barnes No. 5 1/2 screw cutting metal lathe This is the biggest
pedal lathe that Barnes made. It comes with complete change-gear set; pedal assembly,
the seat bracket and one of the brackets near the gears are both reproductions, intact bull
wheel, nice tool post, a basically intact and functional lathe that is run by pedal driven flat
chain, in very good overall condition. (Pedal assembly was loaned when the photos were
taken. They'll be back before the sale).
502._____ AMPCO No. 2 non-sparking shovel, like those used by the gas company, VG.
503._____ Unusual non-sparking pick, like those used by the gas company, VG.
504._____ Three homemade alligator wrenches including one made from a file or rasp.
505._____ Three double-ended alligator wrenches inc. EVER READY; DIAMOND
EDGE DE100 and KandB CO.
506._____ Lot; J. Caspers pliers; GEARENCH valve wheel wrench; & a pitted twybil.
507._____ Four alligator wrenches inc. VandB No.1 double ended; & The Elgin adj.
508._____ Four wrenches & two pliers inc. PROTO 234 & Lowentraut 10-inch gas
pliers.
509._____ Lot: Nice CRONK fencing pliers; scarce SWALLOW AIRPLANE CO.
screwdriver; and iron hacksaw frame.
510._____ Blackhawk-type 4-way adjustable plug wrench; and two ratchet wrenches;
and three fixed socket wrenches.
511._____ Long ice handling tool for moving blocks of ice in an ice house.
512._____ Zima Patent (No. 1,157,356) hoe from Humphrey, Nebraska, 1915, VG.
513._____ Lot of three wrenches and a CRAIN 450 STRIP CUTTER
514._____ Three long handled lathe tools.
515._____ Early Stanley #45 combination plane with floral decorations and Stanley #71
router plane with 1/2-inch blade, VG.
516._____ Craftsman (Millers Falls?) duplex or rabbet and fillester plane complete with
fence and depth stop plus a Union spoke shave with loop handles, VG.
517._____ Small English wheel for taking hammer or tool marks out of sheet metal, can
be mounted in a bench vise.
518._____ CHAMPION BLOWER and FORGE CO. small sized post drill, a previous
owner removed the handle and mounted a big sprocket onto the original gear wheel to
motorize it, can be restored to original condition with a crank handle.
519._____ Two blacksmith's hammers: cross peen and diagonal peen.
520._____ Three blacksmith's hammers: punch; extra large ball peen & diagonal peen.
521._____ Three blacksmith's hammers: diagonal peen; chisel; and turning.
522._____ Hand forged tool for holding open a horse's mouth for working on its teeth;
plus a modern wine bottle corking tool made in France.
523._____ Lot of 11 wrenches inc. nine auto-type socket wrenches plus a Case 256 and a
VandK brass pump wrench.
524._____ Five implement type wrenches inc. Case 106; STAVER; STANDARD, etc.
525._____ Unusual Jackson's 1901 Patent (No. 668,645) 14-inch pipe wrench made by
W.W. Whitehead of Davenport, Iowa, on a patent issued June 11, 1901, the link that
connects the lever to the top jaw is broken and needs to be repaired, otherwise VG.
526._____ Two VandK brass pump wrenches; a PURE CARBONIC iron wrench; and
two DELCO light plant wrenches.
527._____ Pair AMPCO ALBR spark-proof open ended wrenches; one ALB W706 3/4inch and 9/16-inch; and W726, 7/8-inch and 13/16-inch, both like new.
528._____ AMPCO N1 non sparking nail puller, like new condition.
529._____ AMPCO non sparking 15-inch W1148A spud type nut wrench.
530._____ BERYLCO BECU W219 non sparking 18-inch Stilson-type pipe wrench, like
new condition.
531._____ Four saw sets: three lever type inc. TAINTOR'S; Morrill's #1 & an unmarked
Stearns plus one wrest-type marked GERMANY.
532._____ Four saw sets: three lever types inc. aluminum Welliver; Stearns; & Pine Knot
#110; plus a wrest-type marked GERMANY.
533._____ Unusual homemade? hatchet & ELWELL 3902 billhook that needs a new
wooden handle.
534._____ Four wrenches: three are marked ST.L.C.CO (St. Louis Car Company) a
maker of railroad cars, all VG.
535._____ Lot three button hooks and two ice picks.
536._____ Five different advertising screwdrivers.
537._____ Two chain tools: Weed Sturdy Pliers by American Chain Co. & Schriver Co.
Cincinnati, Ohio link pliers.
538._____ Unusual nickel plated steel pedal or shoe stand with the letters CK SON STL
MO cast into it. Possibly from a shoe shine stand.
539._____ Nickel plated nut cracker mounted in a wooden bowl, some nickel peeling.
540._____ Nice hand-cranked apple peeler & wooden bottle corking tool, VG.
541._____ Three Snap-On items: windbreaker jacket, stocking cap & brimmed cap.
542._____ Fine GEM folding wooden miter box & unusual Wheeler Madden & Clemson
hand saw, handle needs to be repaired or replaced.
543._____ FINE Gates drive belt measuring tool.
544._____ Pomeroy Patent riveting machine with built-in vise; plus an unusual anvil that
had something else with it at one time, possibly a vise.
545._____ The item in red paint looks like an old tornado siren, may not be complete;
plus an A.H. Patch patent corn-sheller, needing a crank handle.
546._____ Nice long handled sythe.
547._____ Three sickles: BOOKER; CHIP-A-WAY & another marked NY with ususual
touch mark.
548._____ Primitive wooden witchet or rounder.
549._____ Two router planes: Stanley #71 1/2 with 1/2-in. blade; & router with steel
sole, VG.
550._____ FINE cabinetmaker's work bench having both face and end vises with wooden
screws.
551._____ KING & PEACH HULL, English beech slide arm plow plane with brass arm
wedges.
552._____ JAS. MILNE English handled beech slide-arm plow plane, very nice.
553._____ Graduated set of 8 W. BUTCHER plow plane blades.
554._____ Graduated set of 8 W. Butcher plow plane irons.
555._____ Lot of 9 wooden plow plane bodies.
556._____ Two boxes plane parts including wooden knobs and wedges and screws.
557._____ ALEX. MARSHALL Scottish beech plow plane marked BIGGAR
H.SCHOOL.
558._____ One set of 7 graduated Moulson Bros. irons
559._____ SANDUSKY #119 handled beech screw-arm plow plane, VG.
560._____ Graduated set of 8 unmarked plow plane irons.
561._____ Small croze, marked WILN for Wilno Lithuania, for small barrels or kegs.
562._____ AUBURN TOOL CO. beech screw-arm plow plane, wedge a replacement.
563._____ Graduated set of 8 unmarked plow plane irons.
564._____ Set of five 1979 Fine Woodworking Magazines, missing only Sept/Oct.
565._____ Lot of nine paperback tool books & catalogs inc. Ohio Tool, Stanley; H.
Chapin's Son etc.
566._____ Well worn Dictionary of Tools by R.A. Salamon book; plus Ohio Toolmakers
And Their Tools book by Jack Devitt.
567._____ Three tool books: Barlow's price guide; MJD's Catalogue of Antique Tools; &
The Garrett Wade Book of Woodworking Tools.
568._____ Fine Pine Knot 9-inch drawknife plus Stanley rosewood handled try square &
fine rosewood handled sliding bevel with TRUE TEMPER blade.
569._____ E.C. Stearns adjustable hollow auger with intact depth stop, VG.
570._____ D.E. WHITON Code - GRILLB 3-jaw lathe chuck, VG; plus a face plate.
571._____ Older D.E. WHITON 4-jaw lathe chuck, and smaller face plate.
572._____ Fine L.S. Starrett speed indicator. Has 1897 & 1905 patent dates.
573._____ Six antique FORD automotive wrenches plus two FORD specialty tools.
574._____ Antique Cadillac automobile wrench 10-inch long 1 1/2-inch box end, for
valve covers?
575._____ Five Alfa Romeo automotive wrenches & two small 8 & 10mm FIAT auto
wrenches.
576._____ Four wrenches inc. FORD, NASH, IH & FORDSON plus TOYOTA JAPAN
pliers & U.S. pliers
577._____ Trimo 8-inch screw adjusting nut wrench with wood handles, fine overall
condition; plus a small screw adjust pocket wrench marked 1944 RICHARDS
SHEFFIELD on one side and TENT SHEFFIELD on the other, fine overall.
578._____ Small well-executed board of carved mini tools and farm implements.
579._____ Wooden box bitstock tools inc. center bits; counter sinks, gimlets, etc.
580._____ Large Stearns? dowel or spoke pointer used in a brace & a large rosewood
handled Stanley sliding bevel, blade rusty and lever broken off brass locking nut.
581._____ Pair of iron spoke shaves inc. Union #117 with flat and round bottoms and an
unmarked hollow faced shave.
582._____ Fine Hook scraper in original box bottom with original pamphlet.
583._____ Two handled scrapers including one by E.C. Atkins with original blade.
584._____ Pair of scythe blades plus an early foot-shaped treadle base and shaft for some
type of treadle machine.
585._____ Steptoe McFarlan & Co. Cincinnati, Ohio foot powered mortising machine,
cast iron base had a piece broken out of one corner and a crack at another corner, needs
welding, paint and reassembly. A box of original nuts and bolts is included.
586._____ Antique W.P. HOWARD & CO. ST. LOUIS grain bag, VG. Howard shows
up in the 1891 Index of the Chicago & Alton Railway System under the Grain Dealers &
Shippers Gazetteer.
587._____ Hoist Wright Improved Model 1/2-ton chain hoist by Wright Manufacturing
York, PA. Complete & VG.
588._____ Bead breaker for auto, truck, and tractor tires, operates like a slide hammer,
would make a good ice chipper too, VG.
589._____ Two Farmall brace wrenches for attaching cultivator to M or H tractor axels &
homemade mystery tongs.
590._____ Pair track tongs used by two men to pick up one end of a section of railroad
track, VG.
591._____ Pair railroad tools: the one on top looks like a giant pipe wrench, but it would
have had a long wooden handle in one end and been used to turn switches, valves, etc.;
the other looks like another track tool maybe a spike puller?
592._____ Lot of two wrenches inc. IH Co. G3170, unknown TC369 plus an iron
DURCO handle with the number BX23471A, all VG.
593._____ Decker Animal Marker (ear notcher) Keokuk, Iowa.
594._____ Pair of primitive hay knives, one has a replaced wooden handle, both VG.
595._____ NOS STA-TITE scythe by the STA-TITE SNATH COMPANY Shelbyville,
Indiana with intact label on handle, fine.
596._____ Primitive apple butter paddle.
597._____ Early wheat cradle or harvesting scythe, VG.
598._____ W.F. & John Barnes iron base for a former or other pedal powered tool.
599._____ Seneca Falls treadle lathe parts: pair of very good legs and nice bed. The head
stock, tool rest and tail stock are most likely not original to this lathe.
600._____ Unknown make forge blower, has brass oil cups on both sides, spins freely,
fine overall.
601._____ Oak display case, 6-foot with one wooden shelf and a bracket for a second
shelf, VG.
602._____ Scarce Chapin Stephens 28-in. #1 1/2 plumb & level with spring loaded popup sights in both ends of the stock, very good overall.
603._____ Chapin Stephens 28-inch plumb & level with adjustable boxwood
inclinometer insert in one end, all vials intact, very good overall.
604._____ Keen Kutter KK3 (Disston?) 26-inch plumb & level, both vials intact, very
good overall.
605._____ Scarce 24-inch Stanley #21/93 brass bound mahogany plumb & level, small
hang hole in one end, and 10-inch crack along bottom edge, vials intact, very good
overall.
606._____ Children's wooden tool cabinet with tools, several marked MADE IN
POLAND, all tools and box in very good condition.
607._____ HANDY ANDY child sized cloth apron and original HANDY ANDY plane
& level; also included are a rubber drill and hammer.
608._____ Mattel THE POWER SHOP 3.0 toy in original box, VG.
609._____ Seven toy or novelty tools including keyhole saw; mini plier keychain;
hammer, all-wood plane, Polish stamped steel plane, etc.
610._____ Lot of toy or mini tools inc. No. 14 R.BLISS MFG clamp; Handyman H102;
nickel plated pliers; hand saw, etc.
611._____ Two Clipper Belt Lacers made by the Clipper Belt Lacer Co. of Grand
Rapids, Michigan. They are used to join the ends of flat leather belts for driving
machinery. The bigger one has two handles and comes with a NOS box of belt hooks.
and
612._____ Small work bench top with screw-operated end vise that was purchased at the
estate sale of renowned area sketch artist Roscoe Misselhorn.
613._____ Four Stanley carpenters levels: early 30-in.; 28-in. & 26-inch #3 & 24-in. #00,
all in VG condition.
614._____ Three wooden levels: 26-inch Stanley #3?; 28-inch Disston & 30-inch Upson
Nut.
615._____ Three levels: 28-inch Keen Kutter KK3; 26-inch C-S CO. & 24-inch Stratton
Level Co.
616._____ Two wooden 28-inch Davis & Cook Patent levels.
617._____ Pair transitional bench planes including prelateral Stanley #30.
618._____ Three 8-inch #3 Stanley iron smooth planes.
619._____ Four 8-inch iron bench planes: Parplus with Dunlap blade, Bluegrass, Stanley
& Dunlap.
620._____ Three Stanley SW carpenters levels: 26-in. #0; 26-in. #30 with hang hole in
one end of stock; & 30-in. #3, all three have partial decals remaining, all VG.
621._____ Three Stanley levels: 26-in. #5, VG; 30-in. #0, Fine; & 30-in. #30 good.
622._____ Three Disston-made carpenters levels: 30-in. in red paint and having a hang
hole in one end; 30-in. with 1912 patent, VG; & a RICH-CON 24-in. double plumb &
level with small chunk of wood missing from one corner, otherwise VG.
623._____ Two Stratton Brothers wooden levels inc. #3.
624._____ Stratton Brothers brass bound plumb & level.
625._____ Winchester 30-inch #9817 level, Indian cents cover the plumb vial openings,
VG.
626._____ Popular Mechanics "do-it-yourself" encyclopedia set, vols. #1, 2, 3, 4, 8, 9,
10, 11, 12, 13, 15, & 16 plus a hard bound Practical Handyman's Encyclopedia, all VG.
627._____ Popular Mechanics magazines 1953 to 1955 total 14 issues.
628._____ Popular Sceince & Popular Mechanics 16 issues total 3 missing covers.
629._____ Popular Science & Popular Mechanics magazines 19 issues total, all VG.
630._____ Popular Electronics magazines 16 issues total, all VG.
631._____ Popular Electronics, Popular Mechanics, Mechanix Illustrated magazines, 14
issues total.
632._____ Popular Mechanics, Popular Electronics & Home Mechanix magazines 12
issues total.
633._____ Lot of misc. woodworking magazines & tool catalogs inc. The American
Woodworker & Fine Woodworking.
634. Flat of pull tab beer cans from the 1960s & 1970s. (G268.jpg)
635. Flat of pull tab beer cans from 1960s & 1970s, some still full. (G269.jpg)
636. Flat of pull tab beer cans from 1960s & 1970s, some still full. (G270.jpg)
637. TBA_______________________________________.
638. TBA_______________________________________.
639. TBA_______________________________________.
640. TBA_______________________________________.
641. TBA_______________________________________.
642. TBA_______________________________________.
643. TBA_______________________________________.
644. TBA_______________________________________.
645. TBA_______________________________________.
646. TBA_______________________________________.
647._____ Parks electric 12-inch surface planner.
648._____ STANLEY TOOL CENTER store sign, original, VG.
649._____ DIAMOND EDGE TOOLS and CUTLERY sign from the ARTHUR
HAFERKAMP hardware store in August, Missouri, VG.
650._____ DELUXE copper boiler with wooden handles.
Up to 70 additional lots will be printed on a separate sheet and handed out at the sale.
Bring a big truck or trailer if you're buying the treadle stuff or benches. We'll do our best
to help you get the heavy stuff loaded.