1
INTRODUCTION ...................................................................................................................................... 2
2
TECHNICAL DESCRIPTION ................................................................................................................. 2
2.1
2.2
2.3
2.4
2.5
2.6
BOARD DESIGN ..................................................................................................................................... 2
NEW HARDWARE #1 DESCRIPTION........................................................................................................ 2
NEW HARDWARE #2 DESCRIPTION........................................................................................................ 2
FIRMWARE DESIGN ............................................................................................................................... 2
SOFTWARE DESIGN ............................................................................................................................... 2
TESTING PROCESS ................................................................................................................................. 2
3
RESULTS AND ERROR ANALYSIS ...................................................................................................... 2
4
CONCLUSION ........................................................................................................................................... 2
5
FUTURE DEVELOPMENT IDEAS ........................................................................................................ 2
6
ACKNOWLEDGEMENTS ....................................................................................................................... 2
7
REFERENCES ........................................................................................................................................... 2
8
APPENDICES ............................................................................................................................................ 3
8.1
8.2
8.3
8.4
8.5
APPENDIX - BILL OF MATERIALS........................................................................................................... 3
APPENDIX - SCHEMATICS ...................................................................................................................... 3
APPENDIX - FIRMWARE SOURCE CODE ................................................................................................. 3
APPENDIX - SOFTWARE SOURCE CODE ................................................................................................. 3
APPENDIX - DATA SHEETS AND APPLICATION NOTES ........................................................................... 3
Final Project Name
1
Student Name(s)
INTRODUCTION
Students are not required to follow this template, as long as all the required information is presented
in the report. This template is provided only as an aid to the student.
2
TECHNICAL DESCRIPTION
2.1
Board Design
2.2
New Hardware #1 Description
2.3
New Hardware #2 Description
2.4
Firmware Design
2.5
Software Design
2.6
Testing Process
3 RESULTS AND ERROR ANALYSIS
Include a description of how well your project functioned and also what you learned during the
project development. Include a description of any problems experienced and how those might be
overcome.
4
CONCLUSION
5 FUTURE DEVELOPMENT IDEAS
How would you suggest this project be implemented in the future? What additional design elements
should be included or what should be removed? What testing should be done in the future?
6
ACKNOWLEDGEMENTS
7 REFERENCES
References may include articles, data sheets, application notes, books, people, web resources
(include URLs), etc.
2
Final Project Name
Student Name(s)
8 APPENDICES
Several appendices have been attached to this report in the order shown below.
8.1
Appendix - Bill of Materials
Part Description
Source
74LS74 D Flip-Flop
Part #2
Part #3
74LS245 Octal Bus Transceiver (2)
Part #4
Digi-Key www.digikey.com
WebParts www.webparts.com
Jameco www.jameco.com
Embedded Systems Lab
XYZZ Company Donation (worth $55.00)
TOTAL
Cost
$0.25
$23.95
$1.50
$1.00
$0.00
$25.70
Note: If I was doing this project over again, I would have obtained Part #2 from alternate source
xxxxx. I also would have chosen a different part instead of Part #3, because…
8.2
Appendix - Schematics
8.3
Appendix - Firmware Source Code
8.4
Appendix - Software Source Code
8.5
Appendix - Data Sheets and Application Notes
3