Mohamed El Sayed Abdul Aziz Hussien Shehata
Personal Info:
Date of Birth:
28th April 1978. (Kuwait).
Nationality:
Egyptian.
Postal Address:
8 El Hafiz St. Moharem bek, App. No.7, Alexandria, Egypt.
Marital Status:
Married and have children.
Contact numbers:
+20 3 3084205
+20 1221433675 (Roaming Cell Phone).
E mail contacts:
zanak128@yahoo.com
mohamed_zanak@yahoo.com
Spoken Languages: English (Fluent) – Arabic (Native).
H U
UH
HU
UH
HU
zanak512@yahoo.co.uk
Objective:
To seek a challenging position as QC Assistant Manager, QA/QC Coordinator, QAQC Procurement Lead, EPC QC Supervisor, QC
Piping, Pipeline Welding & NDT Lead Inspector – Mechanical Vendor Inspection & Third Party Inspection, Material Inspection and
Expeditor for EPC, TPI, Vendor, PMC, Clients Representative, Consulting & Engineering Companies; to monitor, control and ensure
compliance to client Specifications, Procedures, and Legislation.
Experience Summary:
I have almost 16 years experience, worked and varied within construction, fabrication, welding & installation of piping and pipeline
systems, well head flow lines, steel structure, pressure vessels, storage tanks; and in service maintenance (recently) of Oil & Gas,
Steel Plants, Gas Fired Steam Boilers Power Generation Plants, Petroleum Oil Refinery, Petrochemical, Gas Plants, Storage and
Spherical (Orbital) Tank Farms Industries.
Work History:
- I worked in EPC and Turn Key Projects for:
Ferrometalco/DSD German Co.
ABB Lummus Global.
Cimi Montubi spa Italy.
Petrofac.
ENPPI – Egyptian Petroleum Engineering Co.
Castolin Eutectic UK.
FosterWheeler France, UK.
ENI Snamprogetti.
Technip Italy SpA.
Fluor Daniel UK.
TTIL-SNC.
Tecnicas Reunidas Spain.
Dietsmann – Monaco.
ENI Saipem.
GE- Power and Water - USA
- I worked in an Accreditation Bodies Organizations as Third Party Inspection (TPI) & Client Representative as:
Moody International KSA.
Veloci - Egypt, Kuwait and Australia.
- I worked & approved in the Construction & Installation of a Multinational Midium, and Mega Projects Owned to:
ANSDK (Alexandria National Iron & Steel Company) Alex-Egypt.
Sonatrach Algeria.
Middle East Oil Refinery (Midor Egypt).
ADNOC/Takreer Abu Dhabi-UAE.
AMOC (Alexandria Mineral Oil Company) Alex-Egypt.
PETRO Rabigh KSA.
KJO (Alkhafji Joint Operation) KSA/Kuwait.
Aramco KSA.
GUPCO/BP Red Sea-Alshokir, Egypt.
Yansab KSA.
3EC/EDF Port Said, Egypt.
Sharq/Sabic KSA.
PDO/Shell (Petroleum Development of Oman).
ENI/Wafa Oil & Gas Libya
PGESCo. (Power Generation Engineering Services Company) Egypt.
MDEPC (Middle Delta Electricity Production Co.) Egypt.
My work locations had includes:
Egypt, Algeria, UAE United Arab Emirates, Kingdom Saudi Arabia KSA, Sultanate of Oman, and Libya.
Education and Qualification:
- The Continuing Education & Certification Engineering Program in the AUC (American University in Cairo) –
TQLC-Testing & Quality Control Engineering Specialization Certificate. (2003).
- Academy Of Specialized Studies – Alexandria Workers University – Division of Technological Development –
Bachelor Of Quality Control (2002).
- ASNT LEVEL II ( R.T.F.I - P.T. - M.T .) Under the Recommended practice ASNT-SNT-TC-1A and the written practice of the
EWA - Egyptian Welding Academy. Certified since 1999 till present according to ASNT approperiate renewal schedule.
- Previous AWS - CAWI Certificate – Since 2000 - 2004
- CSWIP 3.1 - Welding Inspector (TWI Cambridge, UK) – Since 2005 till present.
TWI-CSWIP Certificate No. : 21432
- TWI-CSWIP 3.2 – Senior Welding Inspector (TWI Cambridge, UK) – Possessing Qualification & Awaiting Exam Result.
- TWI Registered Welding Inspector – A United Kingdom Registry 2010
TWI-CSWIP Registered Certificate No. : R/48527
- Registered TWI-CSWIP Candidate/Resume.
Registry, Membership & Stamp Number: 557854
- QMS-Lead Quality Auditor Certificate - BVQI-IRCA Certification (ISO 9000:2000 Series).
BVQI-IRCA Certificate No.: LA2/06/EG/12319
- ARAMCO VID approval SAP. No. : 70005814
(Pressure Vessel - Valve Inspection - General Mechanical - Steel Structural Inspection)
Page 1 of 8
Computer Skills:
- Microsoft Windows
- Microsoft Office
- Fox Pro D. Base
- Hardware Electronic components Maintenance.
- Bios and memory programmer.
- Internet: Mozilla Fire Fox - Internet Explorer.
Safety Trainings - Award Certificates, and Memberships:
Certificate of Supervisor HSE Responsibilities and Leadership.
Achievement certificate of 16 Million man hours without LTI (Lost Time Injury).
Award PDO - STOP (Safety Training Observation Program), and safe supervising program.
Award PDO/SRDC project Enhanced Safety Supervision and Workmanship training.
Award PDO/SRDC project appreciation certificate of performance.
Membership of the AWS – American Welding Society, Miami – Florida USA.
Professional Membership of the WJS - Welding & Joining Society. TWI – The Welding Institute Cambridge, UK.
TWI–CSWIP Certificate of Professional Registration as Registered Welding Inspector.
SPE International (Society of Petrol. Eng.)/EC Alexandria University - Faculty of Engineering, Introduction to Offshore Engineering.
GE US/Trans Global Energy Lock Out Tag Out (LOTO) Training Certificate.
Gained Skills and Experience Along Last 16 Years:
- Have knowledge of international Codes/Standards applicable to inspection, Material, Testing; (AWS, ASTM, API, ASME, TEMA,
NACE, ANSI, API 1104 for pipelines) and Client/Owner specification (PDO/Shell D.E.P, SP – MSS, Takreer/ADNOC, Sonatrach,
Aramco, ENI, TOTAL GS PLR 420, 421 for Pipelines, Yansab/Fluor Daniel).
- Develop, Implement & Coordinate QA/QC Plans, Procedures, Final Dossier Handover & Contractual Turnover packages for final
CCC (Construction Completion Certificate) as per contract and specification.
- Reviewing and approving Contractors Quality Control Plans, Procedures, Inspection and Test Plans, and all relevant Contractor’s
Quality Documentations and organization charts, material release notes and certificates before issue to site for installation.
- Review design drawings, Isometric DWg’s & engineering specifications to assure that all applicable standards have been applied.
- Develop, Implement & Coordinate QA/QC Plans, Procedures, Final Dossier Handover & Contractual Turnover packages for final
CCC (Construction Completion Certificate) as per contract and specification.
- Coordinate QA/QC activities & ensure proper carrying out of quality control activities as per contract requirements & work scope.
- Supervising the activity of QC Services Provider Inspectors (TPI Organizations - NDT Contractors) as Owner representative and
ensuring that it performed with due diligence.
- Control & check proper trace of all site contractors materials and welding consumables, and approving their handling procedures
as per project specification and manufacturer recommendation.
- Ensure implementation of contractor’s QA/QC plan, ITP and Procedures during fabrication, welding, installation and final testing
according to inspection criticality of hold/witness points.
- Reviewing, approve project quality documentation, Inspection, welding procedures when appropriate according to the documents
code of reviewing and evaluating Contractor Quality documents submittals.
- Record legibly and accurately the non-complying construction practices and problems against quality, project specifications during
construction, and during raw piping materials & equipments site receiving (Material Receiving Reports, Material Take Off Reports).
- Issue Non-conformance on deficient construction work and monitor contractors corrective actions and close out of NCRs.
- Issue, reporting/documenting non-conformities, and suggested corrective action to be carried out by contractors to achieve timely
close out of (Site Observation Reports & Memos, NCRs).
- Attend, Co-ordinate, and interface between discipline engineers within the PMT, and represent quality control at project meetings
(Pre Production, Pre inspection, and kick off meetings).
- Co-ordination of QC inspectors where appropriates, and control rotation of RFI and QC documents between contractors, EPC,
companies, Project owner & TPI representatives.
- Ensure Coordination with logistic and Material Department Staff for follow up of Material Procurement QA/QC contractual
requirements, transportation and delivery to/from job site for issues from Stock related to project.
- Evaluation, review of design and fabrication changes requests and waivers; (Technical queries/Request for engineering, site
drawings as built, concession request) against contractual requirements, project QA/QC procedures, specifications, and standards.
- Co-ordinate inspection activities between client, supplier and third party inspection agency to ensure material purchased are as per
the requirements Prepares Inspection request order assignment to the third party inspection agencies.
- Coordinate and resolve comments on supplier quality control documents, inspection procedures between supplier, TPI agency,
and project owner representatives.
- Delegate & Assist as QC Coordinator the QA Manager in organizing the project Kick off meetings, Pre Inspection meetings,
weekly, and monthly meetings with client and vendors in all running projects.
- Review; perform assessment on inspection reports submitted by others for approvals and signature.
- Co-ordination of QA/QC with the HSE and construction direct management departments, and ensure timely delivery of appropriate
documentations.
- Review and Monitor EPC contractor/s site quality audits as scheduled, and trace each last audit findings, implementation of
corrective actions, continual improvement and points of concerns to determine compliance of ISO 9001:2008
- Check & Monitor all relevant information and data of the entire project inspection, material release, MDR, all fabrication sequences
in the company data base electronic system using a Company Management computer data base application includes (Contract
Inspection Services data base – Material Procurement Management).
- Monitoring Contractor/Subcontractor Quality system, records and Quality personnel for compliance with requirements, client
specification, and standards, review and evaluate QC personnel reporting process results and ensuring proper using approved
contract agreement formats.
- Perform as client representative daily monitoring and surveillance of contractor's pipe fabrication operations, and site installation.
Page 2 of 8
-
-
-
-
-
-
Monitoring, expedite progress and performance of fabricators, subcontractors and installation companies.
Expedite & Confirm with Vendor(s) understanding of purchase order requirements, method, & milestones for progress verifications.
Obtain from Vendors a comprehensive schedule to allow the expediting to gauge the progress of the order.
Contact Vendor for follow-up of engineering data submission, materials acquisition, progress and any deliveries advice / status.
Expedite the Company’s engineering to release missing or incomplete information to Vendor.
Expedite and inspect at appropriate time fabricated/manufacturer products to verify that scheduled activities actually take place.
Approve, maintain, & assure expediting files in a uniform manner and completely up to date before dispatch and prior to delivery.
Determine causes of delays to recover the delivery slippage for immediate reporting & Follow up inspection findings, Overage,
Shortage & damaged materials at vendor/manufacturer premises.
Perform vendor shop quality assessments; review and approve final fabrication/inspection documents packages, partial and final
manufacturer data record book before release static equipment, and piping systems (Release notes / Release Certificates).
Carry out HOLD, Witness, and Surveillance / Monitoring inspections and testing at manufacturing workshops or construction sites
to ensure compliance with the Client requirements, project specifications, procedures and standards.
Approve, witness & inspect new site arrived material MRR as pipes, fittings, plate sheets materials against any mill imperfection,
inspect and conform dimensions, length, diameter, thickness, and assure material in accordance and conform purchase order, mill
test certificates, MDR, supplied from pipe mill or manufacturer, and evaluate it’s compliance to the project specification, and
standard codes (ASME B Series, API Codes, Standards, ASTM).
Supervise & witness the NDT nondestructive testing inspection according to client specification and relevant ASME V code.
Approve, witness as client representative inspection according to codes and standards, client specification, AWS D1.1/ASME
IX/ANSI B31.1 - 31.3 - 31.4 - 31.8 – 16.5 , inspection and dimension of all field activities (Mat. receiving of piping, fittings, valves,
plates, flanges) welding & rack installations.
Prepare & issue site inspection reports with all findings, abnormalities and recommendations.
Review, approve & witness testing and certifying welders and welding, NDT, PWHT, Inspection procedures.
Review and marking up Manufacturing contractors Inspection and Test Plans with required Witness and Hold points.
Witness & control proper applied welding process as per approved welding procedures, specification & test of welders qualification.
Witness, Approve and check proper carrying out of mechanical destructive lab testing for welded specimens of welder qualification
test coupons according to ASME IX.
Perform welding inspection according to code specification, accessing and issue visual & NDT reports.
Witness and approve Inspection of tank shell plate sheets by NDT & check the dimension (peaking & banding, plumbness &
roundness) and witness vacuum / leak testing to nozzles, manholes, tank bottom plates according to API 650-Welded Steel Tanks
for Oil Storage / 620-Design and Construction of Large, Welded, Low-Pressure Storage Tanks.
Witness inspection and supervision of the fabrication sequence to floating, cone and fixed roof tanks, Sphere tanks & hand over
operations using ASME VIII Division I, API 650 (Welded Steel Oil Storage Tanks) / API 620(Design & Construction of Large
Welded Low Pressure Storage Tanks) during construction and installation.
Attend as 3rd party inspection engineer in-progress steel structure inspection during fabrication, welding, painting and galvanizing.
Review and approve equipment/machines and instruments calibration certificates based on check and inspection before use in the
entire project, and witness the re calibration by the accreditation body at their facilities.
Ensure piping systems are following the approved isometric, P&ID, bill of material, welding map & last revision as built drawings.
Approve, witness PMI testing procedure and verify proper carrying out to stainless steel series and low alloy steel grades.
Approve after my final Interpretation R.T radiographic films of the subcontractors according to ASME B31.3 normal fluid service
B31.1, VIII - IX code requirements for approval.
Collecting & filing all Construction QA/QC Documentation related to installation and fabrication for handover to client/project owner.
Conduct system walk down inspections and identify deficiencies, discrepancies for mechanical completion stage according to the
contract requirements, project specifications and final approved engineering drawings, Isometric drawings, P& ID’s.
Review and approve hydro test package documents before submitting to client and before testing.
Witness & Issue as client representative punch list items & follow up punch list categories clearance and closing activities (before,
after hydro test), and coordinate final pre commissioning punch list clearance as per contract requirements, witness final air
blowing, flushing, and piping fitting final bolt tightness.
Assure the full material traceability to S.S series ,C.S., Alloy steel grades are according to the purchase order, material certificates,
mark no., heat and slab no. have been carried out before releasing material to contractors.
Experience History:
Period:
Company:
Client:
Location:
Position:
Period:
Company:
Project Owner:
Project:
References will be furnished upon request.
March 2014 till Present
Dietsmann, Monaco – MMA Contract (Maintenance Management Assistance Contract).
ENI - Melitah Complex – Wafa Oil & Gas Plant.
Libya – Wafa West Desert.
QC Inspection Manager/Coordinator (Assistant to ENI Owner Co.)
1st January 2013 – Feb 2014
GE – USA (Power Plant Consultant and Turnkey contract).
MDEPC (Middle Delta Electricity Production Co) / PGESCo.
(Power Generation Engineering Services Company) Egypt.
Combined Cycle Power Plant 750 MW / US $ 300 Million Value - Installation & Technical Service of
Two (2) GE Gas Turbines Frame 9FA Dual Fuel Technology (Natural Gas & Light Diesel Oil).
Benha – Egypt.
Project QA/QC Manager.
Location:
Position:
Duties & Responsibilities:
Manage the QAQC Department on a given project.
Page 3 of 8
Monitor and implement the company QAQC policy on site.
Using the QAQC team, prepare QAQC reports for presentation to the Client.
Management and Consultant Teams, ensuring the logs and graphs are accurate.
Arrange QAQC schedules and meetings, ensuring key stakeholders are involved and notes and actions are taken.
Supervise the monitoring of quality of site and reporting and managing of non conformances.
Oversee the materials submittal register for the project.
Oversee the QAQC documentation, ensuring it is logged and filed accordingly.
Administer QAQC training to both QAQC and Construction staff.
Develop, Implement & Coordinate QA/QC Plans, Procedures, Final Dossier Handover & Contractual Turnover packages for final
CCC (Construction Completion Certificate) as per contract and specification.
Planning and administering a quality assurance program that aims at ensuring continuous production that is consistent with the
adopted and established quality standards.
Supervising and overseeing the analysis, inspection, design, testing, painting & insulation to ensure the highest standards of quality.
Ensuring the quality of material received at the sites as per the required specifications & quality norms to avoid use of substandard
material. Coordinating the material procurement department for procurement of material.
Supervising and coordinating the quality auditing efforts to ensure compliance with adopted standards.
Maintaining Quality Manual and Quality Procedures Manual and ensure the awareness of all employees with regards to the criticality
of quality and the adopted standards. Attend Project-Kick Off meetings and Pre-Production Supplier Meetings, where applicable.
Manage Project execution and Turnover of all the final dossier and project contract documents completion (Turn Over
Packages/Construction Completion Certificate package/Turn Over Acceptance Certificate package) to the Egyptian ministry of
electrical power MDEPC (Middle Delta Electricity Production Co) / PGESCo after Mechanical, Electrical, Instrumentation and Control
completion, pre commissioning, commissioning up to turbine first fire and start up, base on Simple Cycle, and combined cycle
operation stage includes Heat Recovery Steam Turbine (GT1A/GT1B), (Performance Test Code ASME PTC).
Aside assignment to my above job (2 days per week):
Company: SCS-Global Energy – UK/KCAD UK and Germany.
Position: KCAD Libya/UK QC Inspection Engineer Representative.
Duties & Resp.: Attend and certify at rectifier company (Valve & Tools Egypt) premises location final pressure, Drifting, and load test
of KCAD Libya/UK BOP (Blow Out Preventers) Manufacturered by Shaffer / Hydrill USA. Review and Approve rectification and
Rework Data Book before shipment to Libya Rigs Locations. My main duties; representation of KCAD UK/Germany during testing
their BOPs before shipping to Rigs site location in Libya. My direct contacts through SCS Global/KCAD UK and Germany.
Period:
2012
Company:
Dietsmann, Monaco – MMA Contract (Maintenance Management Assistance Contract).
Client:
ENI Melitah Complex – Wafa Oil & Gas Plant.
Location:
Libya – Wafa West Desert.
Position:
Owner Representative Inspection Engineer/Coordinator (In service Static Maintenance Dept).
Duties & Responsibilities:
Develope annual inspection plans for (Preventive & Corrective maintenance) of static equipment to ensure compliance with ENI
specification and standard. Attend the implementation of periodic inspection of pressure vessels, storage tanks, well head flow lines
(Raw Gas, Hydrocarnbon, water injection, Inlet & Outlet Gas Headers, Plant Launchers & Receivers, Well Heads Satellite Stations
Inlet Oil & Gas underground pipe lines and Plant piping network systems), carried out by contractor to ensure inspection performed
according to client requirements, inspection plan, approved procedures. Representing ENI/WAFA in corrective and preventive
inspections coordination of static equipment maintenance department, between ENI/WAFA & maintenance contractor’s inspection
personnel. Implementing, supervise maintenance & inspection requirements are followed for static equipments at inspection loc ation
& inspected new fabricated material and spare parts at workshop & plant. Monitor and assure inspectors under my supervision are
following static equipment inspection work orders generated by MAXIMO to determine condition of inspected Static equipments.
Review, evaluate, and approve inspection reports with findings and generate recommendations to the asset teams for any repair or
replacement action necessary to maintain integrity. Ensure all performed preventive & corrective maintenance inspections acco rding
to owner specification, standard & codes specified in Work Orders. Check instrument calibration log book. Review, trace certification,
validity and calibration of all Instruments and equipments used during inspection and maintenance; includes mechanical and
instrumentation departments, and witness the calibration and validity by the accreditation body. Witness the PSV maintenance and
calibration after replacement. Check and audit the ware house consumable and raw material stock and request as appropriate to the
new material to the purchasing department.
Period:
Company:
Client/Project Owner:
Location:
Position:
2011
CPS - Constructor Project Services – Egyptian Company.
LR- Lloyd Register – Egypt/ TCI - San Mar petrochemical Project
Port Saed – Egypt.
QC Inspection Engineer/QC Coordinator.
Period:
Company:
Client/Project Owner:
Location:
Position:
December 2007 – 2010
Period:
Company:
February – September 2007
Saudi Aramco / Velosi – Kuwait.
TR Oman – Initec (Tecnicas Reunidas) group-Spain. (EPC & Turnkey contractor)
Seih Rawl Depletion Compression Plant. (Seih Rawl – Oman)
Sultanate of Oman
QA/QC Inspection Engineer / QC Coordinator (Approved by PDO).
Page 4 of 8
Client/Project Owner:
Saudi Aramco – KSA - Alkhafji Joint Operation-KJO/Expansion of Hout crude onshore production
facilities - Joint venture between Aramco Gulf Operations and Kuwait Gulf Oil Company.
Petrojet - Eastern Fabrication yard, Suez Canal region, Egypt.
VID (Vendor Inspection Division) QA/QC Mechanical Inspection Eng. (Aramco Representative)
Location:
Position:
Duties & Responsibilities:
- working as Aramco QA/QC mechanical representative during the fabrication of Pressure Vessels, API tanks & related piping done
by Petrojet Egyptian Co. (Project Vendor and Fabricator). Expediting of the prepared mechanical rolled, and fabricated material
before dispatch to job site in Al-Khafji Saudi Arabia for installation. Act as QA/ QC coordinator between ENPPI (main contractor
and key turn company) and the project vendors and suppliers. Receiving and approving that piping, plates & fittings material meet
and conforming the required specification and applicable code, perform all QC duties and responsibilities as mentioned in above
skills as Aramco Owner Representative.
- A side Assignment for Velosi Egypt / Australia Branch:
- Assignment from Velosi/Australia branch for EPCM-GRD Minproc/Australian company, the assignment based on expediting the
project from the first quotation stages of the P.O., assignment based on weekly basis to Zamil Steel Egypt as vendor,
manufacturer, and supplier for Tenke Fungurume Project (South Africa).
Period:
Company:
Clients/Project Owner/s:
Location:
Position:
June 2006 - January 2007
Moody International Ltd. KSA
I represent Owner Operators as Aramco, Sabic, Yansab, Petrorabigh, Sharq. EPC as
Snamprogetti, Fosterwheeler, Fluor Daniel, Tecnicas Reunidas.
Saudi Arabia. Approved Aramco, (VID) Vendor Inspection Division.
(Pressure Vessel - Valve Inspection - General Mechanical - Steel Structural Inspection).
Vendor/Third Party Mechanical Inspection-Expediting Engineer.
January to April 2006
Period:
Company:
Client/Project Owner:
Location:
Derrick/Pipe lay Barge).
Saipem Offshore SpA - Subsidiary of Eni group (Italy).
GUPCO.(Gulf of Suez Petroleum Company)/BP British Petroleum (Share Holder).
Red Sea-ALSHOKIR region, Egypt. 20 Inch X52 API Material S-Pipe laying Project (CRAWLER
Position:
Period:
Company:
Client/Project Owner:
Location:
Position:
QC Welding Inspector Engineer.
July 2005 - November 2005
UHDE – GmbH-Germany (Main Contractor and EPC work-Turnkey Project).
Egyptian Helwan Fertilizer Company (HFC) - Ammonia & Urea fertilizer Plant complex.
Helwan (South Cairo)-Egypt.
QA/QC Welding Inspector Engineer.
Period:
Company:
Client/Project Owner:
Location:
Position:
2003 – 2005
Technip - Italy spa for Takreer Abu Dhabi ( EPC work and turn key project ).
Takreer Abu Dhabi UAE – Parsons UAE (Owner Representative) – Moody Int’l (Project TPI).
Ruwais Abu Dhabi, UAE - ULG/LSGO (Un Leaded Gas / Low Sulphur Gas Oil) Project.
QA/QC Tank/Piping Welding Inspector Engineer.
Period:
Company:
Client/Project Owner:
Location:
Position:
August 2002 - December 2002
CTU Lead-Etterkib (Companies Temporary Union) “Syrian & Algerian Companies”
Sonatrach, Algeria - ABB. lummus global / Petrofac (EPC Main contractors).
Ohanet Development Gas Plant – Ohanet, Algeria.
QA/QC Inspection Engineer.
Period:
Company:
Client/Project Owner:
Location:
Position:
September 2001 – July 2002 (Job beside studding).
Techint CIMI Montubi SpA - “Italian company” QA / QC Engineer.
3EC Egyptian Engineering Company/EDF France (Owner) - Foster Wheeler-UK (EPC Contractor)
Port Saed, Egypt - Gas – Fuel Fired Combined Cycle Power Plant (2 X 341 MW UNITS).
QA/QC Engineer.
Period:
Company:
Client/Project Owner:
Location:
Position:
August 2001 (Job beside studding).
Castolin Eutectic “UK”- Assignment of repair crack 48mm of cyclone furnace ring, weigh 3 Tons.
Blue circle cement Co. / Alexandria, Portland Cement Co. (APCC).
Alexandria , Egypt, Elmax region.
Welding & NDT Inspector.
Period:
Company:
Client/Project Owner:
Location:
Position:
December 2000 - July 2001 (Job beside studding).
FINCIMIC “Italian Co.” / Foster Wheeler France (EPC Contractor).
AMOC (Alexandria Mineral Oil Company).
Alexandria, Egypt - Expansion Lube Oil Plant.
QA/QC Inspection, Testing, Welding & NDT Inspector.
Period:
March - November 2000 (Job beside studding).
Page 5 of 8
Company:
Client/Project Owner:
Location:
Ferrometalco, Egypt - Foster Wheeler France (EPC Contractor).
AMOC ( Alexandria Mineral Oil Company ).
Alexandria, Egypt - Expansion Lube Oil Plant (70 Tanks Project).
Position:
Period:
Company:
Client/Project Owner:
Location:
Position:
Welding & NDT Inspector.
November 1999 - July 2000 (Job beside studding).
Daelim Industerial Construction Korean Co. / TECHNIP – TTIL-SNC (EPC Contractor).
Middle East Oil Refinery (MIDOR).
Alexandria, Egypt - MIDOR Oil Refinery Plant.
NDT & Welding Inspector.
Period:
Company:
Client/Project Owner:
Location:
Position:
April 1998 - September 1999 (Job beside studding).
Ferrometalco DSD Egypt German Co. (EPCI Company).
ANSDK (Alexandria National Iron & Steel Company) Flat steel plant.
Alexandria, Egypt.
NDT & Welding Inspector.
Page 6 of 8