access-enable

advertisement
Switch>
enable
Entra a modo privilegiado
enable
Switch>
Switch#
Abreviatura
en->
exit
Salir
exit
Switch con0 is now available
Press RETURN to get started.
Abreviatura
ex->
Switch#
clear
Reset functions
clear access-list counters
(linea en blanca)
Abreviatura
cle---ac--l-c>
clear arp-cache
(linea en blanca)
Abreviatura
cle---ar-->
clear arp-cache
(linea en blanca)
Abreviatura
cle---ar-->
clear interface [Interface]
(linea en blanca)
Abreviatura
cle---in-->
clear mac-address-table dynamic
(linea en blanca)
Abreviatura
cle---mac-dy->
clock
Administra la hora del sistema
clock set hh:mm:ss <DD> MONTH <YYYY>
(linea en blanco)
Exception
% Incomplete command.
% Invalid input detected at '^' marker.
Abreviatura
clo-s->
configure
Entrar a un modo de configuracion
Abreviatura
conf->

configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Abreviatura
conf---- t->
exit
Salir
exit
Abreviatura
ex->
show
Informacion del Sistema

show access-lists
Standard IP access list [number
1-99]
[permit/deny] [any/ip]
Extended IP access list [number 100-199]
[permit/deny/dynamic] [ip/tcp/icmp] [any/ip] any precedence
internet log
Abreviatura
sh-- acce->

show arp
Abreviatura
sh-- arp->

show clock
*00:53:31.927 UTC Mon Mar 1 1993
Abreviatura
sh-- cl->

show configuration
Using 1014 out of 32768 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch
!
!
ip subnet-zero
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
no ip address
!
interface FastEthernet0/2
no ip address
!
interface FastEthernet0/3
no ip address
!
interface FastEthernet0/4
no ip address
!
interface FastEthernet0/5
no ip address
!
interface FastEthernet0/6
no ip address
!
interface FastEthernet0/7
no ip address
!
interface FastEthernet0/8
no ip address
!
interface FastEthernet0/9
no ip address
!
interface FastEthernet0/10
no ip address
!
interface FastEthernet0/11
no ip address
!
interface FastEthernet0/12
no ip address
!
interface GigabitEthernet0/1
no ip address
!
interface GigabitEthernet0/2
no ip address
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
ip http server
!
!
line con 0
line vty 5 15
!
!
monitor session 1 source interface Fa0/1 - 2
monitor session 1 destination interface Fa0/5
end
Abreviatura
sh-- conf->

show interfaces
Vlan1 is administratively down, line protocol is down
Hardware is CPU Interface, address is 000f.24a2.7900 (bia 000f.24a2.7900)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 packets output, 0 bytes, 0 underruns
0 output errors, 2 interface resets
0 output buffer failures, 0 output buffers swapped out
FastEthernet0/1 is down, line protocol is down
Hardware is Fast Ethernet, address is 000f.24a2.7901 (bia 000f.24a2.7901)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Auto-duplex, Auto-speed
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 02:00:37, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
1 packets input, 64 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
1 packets output, 64 bytes, 0 underruns
0 output errors, 0 collisions, 3 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Abreviatura
sh-- in->

show mac-address-table
Mac Address Table
-----------------------------------------Vlan
----
Mac Address
-----------
Type
----
Abreviatura
sh-- mac
->
show running-config
Building configuration...
Current configuration : 1039 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname ksks
!
!
ip subnet-zero
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
no ip address
!
interface FastEthernet0/2
Ports
-----
no ip address
!
interface FastEthernet0/3
no ip address
!
interface FastEthernet0/4
no ip address
!
interface FastEthernet0/5
no ip address
!
interface FastEthernet0/6
no ip address
!
interface FastEthernet0/7
no ip address
!
interface FastEthernet0/8
no ip address
!
interface FastEthernet0/9
no ip address
!
interface FastEthernet0/10
no ip address
!
interface FastEthernet0/11
no ip address
!
interface FastEthernet0/12
no ip address
!
interface GigabitEthernet0/1
no ip address
!
interface GigabitEthernet0/2
no ip address
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
ip http server
!
!
line con 0
line vty 0 4
login
line vty 5 15
login
!
!
monitor session 1 source interface Fa0/1 - 2
monitor session 1 destination interface Fa0/5
end
Abreviatura
sh-- ru-->

show startup-config
Using 1014 out of 32768 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch
!
!
ip subnet-zero
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
no ip address
!
interface FastEthernet0/2
no ip address
!
interface FastEthernet0/3
no ip address
!
interface FastEthernet0/4
no ip address
!
interface FastEthernet0/5
no ip address
!
interface FastEthernet0/6
no ip address
!
interface FastEthernet0/7
no ip address
!
interface FastEthernet0/8
no ip address
!
interface FastEthernet0/9
no ip address
!
interface FastEthernet0/10
no ip address
!
interface FastEthernet0/11
no ip address
!
interface FastEthernet0/12
no ip address
!
interface GigabitEthernet0/1
no ip address
!
interface GigabitEthernet0/2
no ip address
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
ip http server
!
!
line con 0
line vty 5 15
!
!
monitor session 1 source interface Fa0/1 - 2
monitor session 1 destination interface Fa0/5
end
Abreviatura
sh-- star
->
show vlan
VLAN Name
Status
Ports
---- -------------------------------- --------- ------------------------------1
default
active
Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Gi0/1, Gi0/2
2
Servidores_BD_Aplic
active
3
Servidores_Unix_Red_Adm
active
4
VLAN0004
active
5
Red_Administrativa
active
6
Novell_conta
active
8
pabellon8
active
10
Ventas
active
20
Prod
active
50
TeleIP
active
100 Linux_Fwall
active
140 Lab_1403
active
401 Lab_401
active
403 Lab_404_Mecatronica
active
409
605
701
Lab_409
Lab_605
Lab_701
active
active
active
VLAN
---702
703
704
706
707
708
709
1002
1003
1004
1005
Name
-------------------------------Lab_702
Lab_703
Lab_704
Lab_706
Lab_707
lab708
Lab_709
fddi-default
token-ring-default
fddinet-default
trnet-default
Status
Ports
--------- ------------------------------active
active
active
active
active
active
active
active
active
active
active
VLAN
---1
2
3
4
5
6
8
10
20
Type
----enet
enet
enet
enet
enet
enet
enet
enet
enet
SAID
---------100001
100002
100003
100004
100005
100006
100008
100010
100020
MTU
----1500
1500
1500
1500
1500
1500
1500
1500
1500
Parent
------
RingNo
------
BridgeNo
--------
Stp
----
BrdgMode
--------
Trans1
-----0
0
0
0
0
0
0
0
0
Trans2
-----0
0
0
0
0
0
0
0
0
VLAN
---50
100
140
401
403
409
605
701
702
703
704
706
707
708
709
1002
1003
1004
1005
Type
----enet
enet
enet
enet
enet
enet
enet
enet
enet
enet
enet
enet
enet
enet
enet
fddi
tr
fdnet
trnet
SAID
---------100050
100100
100140
100401
100403
100409
100605
100701
100702
100703
100704
100706
100707
100708
100709
101002
101003
101004
101005
MTU
----1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
Parent
------
RingNo
------
BridgeNo
-------1
1
Stp
---ieee
ibm
BrdgMode
-------srb
-
Trans1
-----0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Trans2
-----0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Remote SPAN VLANs
-----------------------------------------------------------------------------Primary Secondary Type
Ports
------- --------- ----------------- ------------------------------------------
Abreviatura
sh-- vl-

show
->
etherchannel
Mac Address Table
-----------------------------------------Vlan
----
Mac Address
-----------
Abreviatura
Type
----
Ports
-----
sh-- mac
->
ip
show
Mac Address Table
-----------------------------------------Vlan
----
Mac Address
-----------
Type
----
Ports
-----
Abreviatura
sh-- mac-
reload
->
Reiniciar
reload
System configuration has been modified.
Save? [yes/no]:
Proceed with reload? [confirm]:
01:59:24: %SYS-5-RELOAD: Reload requested
Abreviatura
rel->
vlan
abort
apply
exit
no
reset
show
vlan
vtp
Configure VLAN parameters
vlan database
Exit mode without applying the changes
Apply current changes and bump revision number
Apply changes, bump revision number, and exit mode
Negate a command or set its defaults
Abandon current changes and reread current database
Show database information
Add, delete, or modify values associated with a single VLAN
Perform VTP administrative functions.
write
Graba configuracion
write
Building configuration...
[OK]
Abreviatura
wr->
Switch(config)#
access-list
Add an access list entry
arp
Set a static ARP entry
exit
Salir
exit
Abreviatura
ex->
hostname
Ingresas el nombre del periferico
hostname [WORD]
Abreviatura
ho->
interface
Seleccionas la interface a configurar
interface ethernet [0-MaxNumero]
Abreviatura
in-- e->
ip
Global IP configuration subcommands
access-list
Named access-list
accounting-list
Select hosts for which IP accounting information is
kept
accounting-threshold Sets the maximum number of accounting entries
accounting-transits Sets the maximum number of transit entries
alias
Alias an IP address to a TCP port
default-gateway
Specify default gateway (if not routing IP)
dhcp-server
Specify address of DHCP server to use
domain-list
Domain name to complete unqualified host names.
domain-lookup
Enable IP Domain Name System hostname translation
domain-name
Define the default domain name
finger
finger server
ftp
FTP configuration commands
gdp
Router discovery mechanism
gratuitous-arps
Generate gratuitous ARPs for PPP/SLIP peer addresses
host
Add an entry to the ip hostname table
host-routing
Enable host-based routing (proxy ARP and redirect)
hp-host
Enable the HP proxy probe service
http
HTTP server configuration
icmp
ICMP options
igmp
IGMP options
local
Specify local options
name-server
Specify address of name server to use
radius
RADIUS configuration commands
rcmd
Rcmd commands
reflexive-list
Reflexive access list
security
Specify system wide security information
source-route
Process packets with source routing header options
sticky-arp
Allow the creation of sticky ARP entries
subnet-zero
Allow 'subnet zero' subnets
tacacs
TACACS configuration commands
tcp
Global TCP parameters
telnet
Specify telnet options
tftp
tftp configuration commands
mac-address-table
Configure the MAC address table
aging-time Set MAC address table entry maximum age
notification Enable/Disable MAC Notification on the switch
static
static keyword
vlan
Vlan commands
Switch(config-if)#
channel-group
Etherchannel/port bundling configuration
channel-group 2 mode
auto
Enable PAgP only if a PAgP device is detected
desirable Enable PAgP unconditionally
on
Enable Etherchannel only
exit
Salir
exit
Abreviatura
ex->
ip
Interface Internet Protocol config commands
mac-address
Manually set interface MAC address
mac-address [H.H.H]
Abreviatura
mac-a->
shutdown
Shutdown a la interface
shutdown
Abreviatura
sh->
spanning-tree
Spanning Tree Subsystem
bpdufilter Don't send or receive BPDUs on this interface
bpduguard
Don't accept BPDUs on this interface
cost
Change an interface's spanning tree port path cost
guard
Change an interface's spanning tree guard mode
link-type
Specify a link type for spanning tree protocol use
mst
Multiple spanning tree
port-priority Change an interface's spanning tree port priority
portfast
Enable an interface to move directly to forwarding on link up
stack-port Enable stack port
vlan
VLAN Switch Spanning Tree
switchport
Set switching mode characteristics
access
Set access mode characteristics of the interface
host
Set port host
mode
Set trunking mode of the interface
nonegotiate Device will not engage in negotiation protocol on this
interface
port-security Security related command
priority
Set appliance 802.1p priority
protected
Configure an interface to be a protected port
trunk
Set trunking characteristics of the interface
voice
Voice appliance attributes
Download