FOR EQUIPMENT INFO ONLY
SPECIFICATIONS WHEN PURCHASED IN 2001
MAY NO LONGER APPLY – RECOMMEND INTERESTED PARTIES INSPECT
One (1) Only LeTourneau, Inc. L-1400 diesel electric front end loader complete with the
following:
1.
Fully enclosed cab, ROPS certified SAE and W.C.B. specifications. Cab
meets SAE J395 & J1040 codes.
Cab complete with:
- tinted glass and sun visor
- coolant heater
- defroster
- insulation
- interior lights
- rear view mirror
- windshield washer and wiper
- adjustable suspension seat and seat belt
- full joystick steering with directional control
- lighter and ashtray
- airhorn
- air conditioning and pressurising
1.1
Cab instrument panel complete with:
- hour meter
- amp meter
- speedometer
- air pressure gauge
- engine oil pressure gauge
- engine low oil pressure warning light
- engine temperature gauge
- fuel gauge
- hydraulic fluid power gauge
- brake indicator light
- air cleaner service warning light
- warning light test switch
- warning buzzer
2.
3.
4.
5.
LeTourneau "Boomer" air filter system
Engine oil filters
Hydraulic fluid power high pressure filters
Traction controls (LeTourneau, Inc.) Tire economy advancement!
Page 1, Highland Valley Copper
Specification & Details L-1400
S-2049 – 09/11/2000
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
110 – 130 volt service receptacle
Fluid power main, low oil and high temperature alarm
Generator/motor temperature protection
Stop, tail and working lights
Backup alarm (electronic)
Lincoln automatic lubrication system, with 120 lb. container
Front window rock protection
Five (5) gallon windshield washer reservoir
Engine – Cummins QSK-60 SS 1800 HP engine
Diagnostic meter ( electrical) mounted in cab
(3) complete sets of parts and maintenance manuals, and (18) operator
manuals
20.0 m³ - 26.0 yd3 spade nose rock bucket with rock deflectors and Esco
71 AG hardware (bucket size subject to review of the final application
requirements and/or conditions) “TLC” bucket hardware option.
(4) 36 x 57 Rimex TSR rims.
(4) Michelin 55/80, R57 x MINE D2 tires.
Vital Signs Monitor (VSM) system with Load Weigh, pre-wired for
"Dispatch" (Modular Mining) interface, laptop computer for data
downloads not included
Cab mounted exterior, convex mirrors
Cab pressurisation dust protection
Fire shield kit
OPTIONS, included in the machine make-up
Engine & Accessory
- Ansul fire control W/manual activation
- Ansul Checkfire II detection system
- Fire extinguisher, 21 lb
- Engine (intake) dust detector
- Five (5) minute idle timer
- Air tank bleed kit
- Moisture Ejection kit
- Jump start kit @ ground level
- Battery disconnect switch
Fuel & Lube
- Wiggins fast fuel
- Wiggins Central service fast hydraulic oil fill/drain, fast engine oil
fill/drain
Operators Cab
- Emergency steering
- Ground level shut down, (1) installed at near base of each ladder & (1) in
the cab, total (3) switches
Page 2, Highland Valley Copper
Specification & Details L-1400
S-2049 – 09/11/2000
- Air clean-out hose in cab
- AM/FM & cassette player with 12 volt power supply
- Rotating beacon (amber)
- Aux. walkway & powered retracting ladder
- Dual door interlock
Lighting Systems
- Quartz 500 watt lights, 110 volt - 2x front
- 2x back
- Engine compartment lighting, 24 volt, and 1 each side of engine, total
(2) lights.
- Access ladder light
- Automatic cabinet light
- Additional engine compartment lights
- Turn signal & position lights
Special Cold Weather Options
- Engine oil & engine coolant heaters (Kim Hot Start)
- Hydraulic tank heaters & battery heaters
- Auxiliary electric cab heater
- Grease reservoir heater
Additional Options, included
- High lift boom arms
- Stand by power & shovel relay @ 6,900 volts
- Ground fault electronics
- Auxiliary Hydraulic oil cooler package for 50ºC temperature
- Fluid sampling kit
- Axle drainage kit
- Rear tow hook
Other Options, available at extra cost
- Cat ® 12v batteries
Page 3, Highland Valley Copper
Specification & Details L-1400
S-2049 – 09/11/2000