1) Machines and Equipments for the Dept. of Mechanical Engineering.
Turbomachinery lab:
Centrifugal Pump Demonstration Unit (FM50):
Specifications: Make: Armfield
The pump should comprise of a water reservoir, pump, control valve, relief valve and
inter- connecting pipework, all mounted on a stainless steel base.It should be equipped
with electronic measurement sensors for pump head pressure, suction, flow-rate and
water temperature. The pump volute should be transparent for visibility. It should be
capable of being linked to a PC via the IFD7 interface unit.Software providing full
instructions for setting up, operating, calibrating and performing the teaching exercises
should be provided along with the provision for logging, processing and displaying data
graphically.
Gear pump (FM52)
Specifications: Make: Armfield
The pump should comprise of a water reservoir, pump, control valve, relief valve and
inter- connecting pipework, all mounted on a stainless steel base.It should be equipped
with electronic measurement sensors for pump head pressure, flow-rate and water
temperature.The pump head should be transparent for visibility.It should be capable of
being linked to a PC .Software providing full instructions for setting up, operating,
calibrating and performing the teaching exercises should be supplied. Facilities should
be provided for logging, processing and displaying data graphically.
Plunger Pump Demonstration Unit((FM53):
Specifications: Make: Armfield
The pump should comprise of a water reservoir, pump, control valve, relief valve and
inter- connecting pipework, all mounted on a stainless steel base.The pump should
include a sprung loading valve and a needle valve for loading the pump.It should be
equipped with electronic measurement sensors for cylinder pressure, plunger position,
pump outlet pressure and cumulative flow. It should have the facility for Pulsation
damping.The pump head should be transparent for visibility.It should be capable of being
linked to a PC .
Software providing full instructions for setting up, operating, calibrating and performing
the teaching exercises should be supplied. Facilities should be provided for logging,
processing and displaying data graphically.
Turbine Service Unit(FM6X)
Specifications: Make: Armfield
Capacity: 28 litres.
Max. flow rate: 20 litres per minute Max head: 30m
It should provide suitable water supply for testing a range of different turbines with flow
meter, pump, brake and dynamometer controlled form software. It should have the
provision for linking to a computer via a USB interface and should be supplied with full
education software package including comprehensive results processing and help
facilities.
Reaction Turbine(FM61)
Specifications: Make: Armfield
The module should effectively demonstrate the operating principles of a reaction turbine.
There should be provision for connection to a PC via the turbine service unit and a USB
interface console.
Pelton Turbine(FM62)
Specifications: Make: Armfield
The module should effectively demonstrate the operating principles of an impulse
turbine. There should be provision for connection to a PC via the turbine service unit and
a USB interface console.
FM63 Propeller TurbineSpecifications: Make: Armfield
The Unit should consists of a 75 litre water reservoir, a circulating pump capable of
producing 14m head at 4.4 litres/second. It should have the provision for loading by a
magnetic brake unit, controlled directly from a PC. It should be supplied with full
education software package including comprehensive results processing and help
facilities.
UNIVERSAL VIBRATION APPARATUS:
Make : TECHQUIPMENT
Electrical supply: Single-Phase, 230V/110V, 50 Hz
Sound Level(all product): Less than 70 dB(A)
The apparatus should have provision for experiments on the following.
Simple pendulum, Compound pendulum, Center of percussion, Determination of
acceleration due to gravity by means of a Kater (reverse) pendulum., Bifilar suspension.,
Mass- spring system., Torsional oscillation of a single rotor, Torsional oscillation of a
single rotor with viscous damping, Torsional oscillation of two rotor system, Transverse
vibration of a beam with one or more bodies attached, Undamped vibration absorber,
Forced vibration of a rigid body-spring system with negligible damping, Free damped
vibrations of a rigid body-spring system, Forced damped vibrations of a rigid body-spring
system.
NOISE METER:
Specification:
Display : 3 ½ digitals liquid large LCD display (1999 Counts).
Resolution: 0.1 dB
Frequency range : 31.5 Hz – 8 kHz.
Sampling range : 2.5 times per second.
Microphone : ½ inch Electret Condenser microphone.
Accuracy : ±1.5 dB (ref 94 dB @ 1 kHz).
Lever range : LO: 30 – 80 dB; Med: 50 – 100 dB; Hi: 80 – 130 dB.
Analog AC output : Output Voltage: 1 Vrms (at full scale).
Analog DC output : Output Voltage: 10 mV/dB.
Dynamic range : 50dB.
Power supply : Standard 9V DC battery.
DC Adaptor Socket : 9V (8-13V, MAX0, Supply Current : 30mA.
Accessories : Instruction Manual, Carrying Case, screw driver x 1 pc x 3.50 plug x 1 pc,
9V battery x 1 pc.
List of Instruments for Engineering Metrology Laboratory
Sl.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Name of the Items
Specification
Make
Order No
Vernier Caliper (dial)
Vernier Caliper (digimatic)
Outside
Micrometer(digimatic)
Tubular Inside Micrometer
Indicating Micrometer
Digital Depth Gage
Depth Micrometer
Depth Base Attachment
Universal Bevel Protractor
Acc: ±0.03mm. 0.01mm, 1mm/rev
Acc: ±0.001”
Acc: ±0.0001”, range: 0-1”
Mitutoyo
Mitutoyo
Mitutoyo
505-686
551-221-20
50-150 mm
Indicating range: ±0.060 mm
0-150 mm
0 – 50 mm
100 mm
12" Blade (187-103) with Clamp
Box
For Universal Protector
Grd:0.01mm,Range:10mm
Grd:0.01mm,Range:1.6mm
For holding stem dia:6mm, 8mm &
9.53mm
* Wide 350µm (-200µm to +150µm)
measurement range.
* Roughness parameters compatible
with ISO, DIN, ANSI, and JIS.
Grade:1, Range: 1.005-100mm
Range: 0.05-1.00mm
Metric(600), Range:0.25-7mm
Inch(550), Range: 4-42TPI
Range: 7.5-15 mm
Mitutoyo
Mitutoyo
Mitutoyo
Mitutoyo
Mitutoyo
Mitutoyo
133-901
510-121
571-201-20
129-113
050084
Mitutoyo
Mitutoyo
Mitutoyo
Mitutoyo
0187105
2046S
513-444T
Acute Angle Attachment
Dial Indicator (Plunger Type)
Dial Indicator (Lever Type)
Magnetic Stand for mounting
Dial Indicator
Surface Roughness Tester
Slip Gauges/Gauge Block
Filler Gauge
Pitch Gauge
Pitch Gauge
Fillet or Radius Gauge
293-831
0187906
7012-10
Mitutoyo
178-920-2D
Mitutoyo
Insize
Insize
Insize
Insize
516-943-11
IS14602-100-20
IS14820- 24
IS14821- 30
IS14802-16
20
21
22
23
24
25
Sine Bar
Straight Edge
Surface Plate (Granite)
Surface Plate Stand
V- Block with Clamp
C- Clamp
11’’ x 1-1/8’’ x 1-1/16’’
36’’/900mm, Series:385
Size: 36x48", Grade:AA, Height: 6’’
Size: 36x48"
Max. work piece dia:25mm,
6” Size
Suburban
Starret
Mitutoyo
Mitutoyo
Mitutoyo
Bharat/JK
6410045
0051458
517-746
517-964
181-902
2) Sophisticated instrument for the Dept. of MBBT
Specifications for 96 well capillary tube Automated DNA sequencer
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
ix.
x.
xi.
Capillary tube: 72-96 well (with up gradation facility)
DATA collection software: yes
DATA analysis software: yes
One dedicated machine for PCR
Computer with all software related to genome sequence assembly: two
Stabilizer(5KVA)
Warranty/Guarantee: Minimum two years.
Provision for extended warranty: yes.
Provision for AMC: yes
Total FOB value.
Total value upto installation at Tezpur University( with demonstration)
Accessories:
i.
Chemicals/reagents for sequencing reaction: at least 1 kit
ii.
Color laser printer
iii.
Refrigerated centrifuge with a swing bucket attachment for 96 well places.
Specification for Ultracentrifuge
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
ix.
x.
xi.
xii.
xiii.
xiv.
Maximum Force : Minimum 7500000 x g
Capacity: 0.1 ml to 1200 ml
Temperature control system/Refrigeration system: Solid state thermo electric
(no CFC).
Operating temperature range(ambient): 20-40 0 C
Inside temperature: 0-40 0 C
Temperature increment: 10 C
User settable program: Yes
Vacuum system: No moisture shall display
LCD screen display: Essential (both RPM and RCF)
Stabilizer: 5KVA
Warranty/Guarantee: Minimum two years.
Provision for extended warranty: Yes
Total FOB value
Total value upto installation at Tezpur University ( with demonstration).
Accessories: ( for accommodating equivalent to minimum of 1.5ml microfuge tube)
i.
Swing out rotor: of various capacities.
ii.
Fixed angle rotor: of various capacities.
3) Lab. equipment for the Department of Food Processing Technology
a) Autoclave: Microprocessor controlled fully automatic sterilizing operation Digital
PID control, complete safety pressure mechanism, with water cutoff and timer.
Capacity: Min 45 lit
Temperature range: Ambient to 50 C to 124 0 C
Chamber: Stainless steel.
Gauge:-0-3 Kg/cm2, Pressure: 1.2Kg/cm2
Door packing : one touch pressure handle type
b) BOD Incubator: Temperature range 00 to 600 , Microprocessor PID multifunction
controller. Capacity: Min 150 lit., silent Fan and defrost function Back light LCD
display with automatic timer, SS inner chamber.
c) UV-VIS Spectrophotometer: Double beam system wave length range: 190 ~1100
nm, spectral Bandwidth: 2nm, Band accuracy: + 0.3 nm, photometric accuracy: +
0.3% T (0~ 100% T), LCD display, stability: < 0.001A/h, Detector: Silicon photo
diode.
d) Vacuum Packaging Machine: Stainless Steel Body, Microprocessor based, size
520x450x100 mm, sealing length : 400 mm, sealing width : 3mm; no of sealing
heads: 2; Digital display, 3 Gas flushing with cycle counter.
e) Digital pH Meter: Measuring voltage: -1800 to +1800 mv; pH range:-2.00 to
+20.00; Temperature: -5.0 to + 105.00C; pH resolution 0.01; pH accuracy: + 0.005
f) Shell & Tube Heat Exchanger
g) Heat Transfer Through Composite wall
h) Discharge Through Orifice & Venturimeter Test: with stainless steel tank
i) Losses Due to Friction in Pipe Lines: with Stainless steel tanks.
j) Reynold’s Apparatus: With stainless steel tank
k) Variable Speed Rotor Mill: Microprocessor based Ergonomic control panel with
membrane keyboard, Motor speed between 6000-20,000 rpm in intervals of a
thousand, constant motor speed even under full load, Digital LED display of rotation,
speed and motor load.
4) Consumable for the Dept. of Physics
Consumables for Scanning Electron Microscope, Model: JOEL , JSM 6390 LV :
Auto carbon coater
Suitable for specimen preparation for SEM observation operates on 110V, 50 Hz
convertible 220V , 50 H3
Standard: Rotary pump
Pressure: Approx. 20 Pa or less
Evaporation Method: Resistor heating method
Over Current Protection: Built in
Carbon Rod: 5.00mm
Terms & Conditions.
1. The rates should be quoted along with specifications and supporting documents
(technical details and brochures etc.).
2. Quotation for each department should be submitted in separate cover indicating the
name of the Department.
3. Quotations should be accompanied byi. A call deposit (earnest money) amounting to Rs. 5,000/- pledge in favour of
the Registrar, Tezpur University, payable at Tezpur.
4. The rates should be exclusive of taxes and applicable tax % should be clearly indicated.
5. The University is exempted from Custom & Excise duty.
6. Terms and Conditions of supply should be clearly indicated in the quotations.
7. The supplier should be in a position to deliver and install the ordered items within the
stipulated time mentioned in the supply order.
8. Items must be delivered at Napaam campus of the University at the cost of the supplier.
9. The rates should be valid at least for a period of one year.
10. The University reserves the right to accept or reject any or all the quotations without
assigning any reason.
11. Applications should be forwarded to the Registrar for release of call deposit against
unaccepted quotations.
12. No separate tender paper will be issued from the office; one should only download
the specifications from the web site.
Sd/- Registrar