Namakkal | Coimbatore | Palakkad
Support: +91 9003600700
31. Automatic Packing control Machine for Industrial
AUTOMATION MECHNAICAL PROJECTS
Application
32. Automatic Packing Conveyor by using sensors
1.
Accident Avoiding System for Punching Machine-RS-5000
33. Automatic Paint Spaying Equipment-RS-5000
2.
Accident Preventer for Cutting Machine-RS-5000
34. Automatic Pneumatic Grinding Machine-RS-5000
3.
Aero plane Controlling System (Flying Model)-
35. Automatic Pneumatic Jack for four wheeler-RS-4800
4.
Aero plane Controlling System (Glider model)
36. Automatic Pneumatic Paper cup folding Machine
5.
Auto Feed Multi-purpose press
37. Automatic Pneumatic Paper cup folding Machine
6.
Auto head-lamp Alignment system for automobile
38. Automatic Pneumatic Reciprocating Water Pumping
7.
Auto Indexing gear cutting attachment for pneumatic
shaping Machine-RS-8000
System-RS-8000
39. Automatic Pneumatic Reciprocating Water Pumping
8.
Automatic accident avoiding system for machines-RS-4500
9.
Automatic accident avoiding system for machines
System
40. Automatic Pneumatic stand for two wheeler-RS-4000
10. Automatic acrylic sheet bending machine (Heater Control)
41. Automatic pneumatic valcanizing Machine
11. Automatic Bottle Washing Machine –RS-4800
42. Automatic Pneumatic vice and jack-RS-7000
12. Automatic Break Failure and Engine Over Heating
43. Automatic potato chips making Machine-RS-5000
Indication-RS-5000
44. Automatic Power Saving Conveyor for Industrial
13. Automatic Car Parking System for apartment Building-RS7500
Application –RS-6000
45. Automatic pressure controller cum valve open/Close
14. Automatic Car Parking System for apartment Building
15. Automatic Dam shutter controlling system-RS-7000
16. Automatic Differential unit Locking System for four
wheeler
Arrangement-RS-4500
46. Automatic railway track crack detecting Vehicle-RS5000
47. Automatic Railways Signaling System-RS-4000
17. Automatic Dish Washing Machine-RS-6000
48. Automatic rain operated wiper-RS-5000
18. Automatic Distance Measurement and Braking System By
49. Automatic Rain operated wiper and Head light Dim /
using Ultrasonic Waves-RS-5500
Bright Controller-RS-6000
19. Automatic Double Axis Welding Machine-RS-8200
20. Automatic Double Axis Welding Machine
21. Automatic drunken drive avoiding system for automobile –
RS-4500
50. Automatic rotating table with sequence operating
machine
51. Automatic Scrap Collecting Vehicle-RS-5500
52. Automatic Scrap collecting Vehicle
22. Automatic Electro-Plating Coating System
53. Automatic sensor based wall painting robot-RS-7500
23. Automatic Fire fighting cum material handling vehicle
54. Automatic Sensor Operated Pneumatic Braking System-
24. Automatic Foot Dust vacuum Cleaning Machine
RS-5000
25. Automatic Gate Open / Close System-RS-4500
55. Automatic shock absorption system for automobile
26. Automatic Humidification system
56. Automatic Sky Car parking System
27. Automatic Hydro-pneumatic Lubrication system
57. Automatic Solar Traffic and Street Light Controller-RS-
28. Automatic Moisture and Light Controlling System for
Garden
58. Automatic Spray Painting System for Industrial-RS-7500
29. Automatic Motorized door Open/Close Mechanism-RS4500
Application
59. Automatic Spring End Grinding Machine-RS-4200
30. Automatic Packing control Machine for Industrial
Application
www.emnano.com
8500
projects@emnano.com
60. Automatic Steering alignment system –RS-6800
Namakkal | Coimbatore | Palakkad
61. Automatic temperature controller with Cooling System-RS5000
Support: +91 9003600700
95. Digital locking system for material handling vehicle for
industrial application
62. Automatic Three axis hydraulic modern Trailer –RS-10000
96. Electro Hydraulic System for Automation in Vehicle
63. Automatic Typical pipe Cutting Machine-RS-6700
97. Electronic assisted hydraulic braking system
64. Automatic Typical pipe Cutting Machine
98. Electronic Fuel Injection (EFI) system for Two wheeler
65. Automatic Vegetable (or) Lemon Cutting machine-RS-
99. Fabrication CNC Drilling Machine
3500
100. Fabrication of Anti-lock Braking System (ABS)
66. Automatic Vegetable (or) Lemon Cutting machine
101. Fabrication of Automated Guided Vehicle (AGV)
67. Automatic Vehicle Accident Information System-RS-8000
102. Fabrication of Automatic car overtaking system
68. Automatic Visitor Guided with Material Handling Vehicle-
103. Fabrication of Automatic cold chamber Die Casting
RS-
Machine
69. Automatic Visitor Guided with Material Handling Vehicle
70. Automatic Water level controller for Over head tank-RS7000
104. Fabrication of Automatic cold chamber Die Casting
Machine
105. Fabrication of Automatic Electro Hydraulic Braking
71. Automatic Water level controller for Over head tank
System
72. Automatic Water Tape Controlling System-RS-6000
106. Fabrication of Automatic Electro hydraulic Jack
73. Automatic Wheel chair cum bed-RS-6000
107. Fabrication of automatic electro-magnetic Clutch-RS-
74. Automatic Wheel Chair for physically disabled person-RS75. Car or Bus reverse Operation Navigation System by using
IR Rays-RS-
6500
108. Fabrication of Automatic Fire Fighting Robot-RS-8000
109. Fabrication of Automatic jack-RS-7000
76. Car or Bus reverse Operation Navigation System by using
IR Rays
110. Fabrication of Automatic Magnetic Accident preventer
for Train
77. Cell phone controlled pick and place robo-RS-10000
111. Fabrication of Automatic Plate Washing Machine
78. Cell Phone Controlled Video Analysing Robot-RS-10000
112. Fabrication of Automatic Pneumatic Bottle Washing
79. CNC Automatic Ramming Machine-RS-
Machine
80. CNC pick and place crane-RS-12000
113. Fabrication of Automatic Pneumatic Hammer-RS-6000
81. CNC Pick and place sequence operated Robot-RS-115000
114. Fabrication of Automatic Pneumatic High speed Sheet
82. CNC pneumatic Auto feed punching MachineD & F of
Automatic Embossing (Die Making) Drilling Machine
83. D & F of Automatic Lubrication System
Cutting Machine-RS-7500
115. Fabrication of Automatic Pneumatic Punching and
Riveting Machine-RS-8000
84. D & F of Automatic Multi-Machine Lubrication System
116. Fabrication of Automatic Pneumatic Shaping Machine
85. D & F of Automatic Pneumatic Printing Press
117. Fabrication of Automatic Railway Gate Controller
86. D & F of Automatic Pneumatic Ramming Machine
118. Fabrication of Automatic Sensor Based Reverse Braking
87. D & F of Automatic Pneumatic Riveting Machine
System
88. D & F of Pneumatic Auto feed Drilling Machine
119. Fabrication of Automatic Steering Mechanism
89. D & F of Pneumatic Auto feed Punching Machine
120. Fabrication of Automatic temperature controller with
90. D & F of Pneumatic high speed Hack saw Machine
cooling system
91. D & F of Pneumatic reciprocating saw machine
121. Fabrication of Automatic typical Pipe Cutting Machine
92. Design & Fabrication of Conveyor Automation
122. Fabrication of Automatic Vehicle Over speed controlling
93. Design & Fabrication of Conveyor Automation
94. Digital locking (Fuel, ignition, side lock) system
(Password) for Two wheeler
www.emnano.com
projects@emnano.com
system for School Zone-RS-8000
123. Fabrication of Car Automation-RS-7500
Namakkal | Coimbatore | Palakkad
124. Fabrication of CNC pneumatic auto feed punching and
Support: +91 9003600700
156. Remote controlled boiler flame on/off with flame
riveting Machine
adjustment system
125. Fabrication of Conveyer Automation
157. Remote controlled Bomb detecting robot
126. Fabrication of Electronic Hack Saw Machine-RS-4500
158. Remote controlled gas stove On/Off with flame
127. Fabrication of Emergency Braking System (EBS)-RS-6000
adjustment System
128. Fabrication of Fully Automated Drilling Machine-RS-8000
159. Remote controlled tilting Wheel chair
129. Fabrication of Intelligent Braking System (IBS)-RS-
160. Remote controlled Vacuum Cleaning Robot
130. Fabrication of Microcontroller Based Self centering Four-
161. Remote controlled Video Analyzing pick and place
jaw Chuck
Robot
131. Fabrication of PC based auto feed pneumatic vice
162. Remote operated weapon System
132. Fabrication of PC based pneumatic bottle washing machine
163. Sensor based auto punching conveyor Machine
133. Fabrication of Pneumatic Auto feed metal Forming
164. Sensor Based Automatic paint marking machine for
Machine
sprocket Industries
134. Fabrication of Pneumatic Auto Feed Riveting Machine
165. Sensor Based Automatic steering control system for
135. Fabrication of Pneumatic Auto gear changer
Automobile
136. Fabrication of Pneumatic Machining Time Reduction in
166. Sensor Based Automatic Track Guided Vehicle (ATGV)
Shaper
167. Sensor Based Automatic Water level Sensing Crane
137. Fabrication of Pneumatic Slotting Machine
168. Sensor Based Inspection Conveyor
138. Fabrication of Pneumatic Sticker/Label Making Machine
169. Sensor Based Material loading/unloading system for
139. Fabrication of Sensor Operated Automated Guided Vehicle
different section
140. Fabrication of Simple indexing by stepper motor in
170. Sensor Operated Automatic Ramming Machine
Shaping Machine
171. Sensor Operated Automatic vehicle accident prevention
141. Fabrication of Solar automatic cell phone charger with pay
system
system
172. Sensor Operated Fire Fighting AGV
142. Fabrication of sub marine (Model)
173. Sensor Operated Paper Counting Machine
143. Fabrication of Unaided Guided Vehicle (UGV)
174. Sensor Operated Power saving Foot dust cleaner
144. Fabrication of Unaided Guided Vehicle (UGV)
175. Sensor Operated Track Guided Vehicle
145. Fabrication of Vacuum conveyor for Industrial Application
176. SMS based automatic drilling machine
146. Fully Automated Intelligent Vehicle (Car Model) –RS-
177. SMS based automatic pneumatic Punching and riveting
10000
machine
147. Highways high Speed sensing and Automatic Pneumatic
178. SMS based automatic pneumatic punching machine
braking System
179. SMS based Automatic two wheeler locking system
148. Intelligent active Suspension system for two wheeler
180. SMS based Bomb detecting robot
149. Intelligent active Suspension system for two wheeler
181. SMS based Pick and place Robot
150. Intelligent Wall painting Crane
182. SMS controlled automatic pneumatic ramming machine
151. Material Dimensions Analyzing Robot
183. SMS controlled Material handling robot
152. Over speed indication and Automatic accident Avoiding
184. SMS controlled pick and place robot
System for four wheeler
185. Two Wheeler Automation with security System
153. PC based Automatic sheet cutting Machine
186. Two Wheeler Automation with security System
154. Railways accident Avoiding System – (Level crossing and
187. Video Analyzing remote controlled vacuum Cleaner
Fire Alarm)
155. Remote controlled air craft (Flying Model)
www.emnano.com
AUTOMATIC MECHANICAL PROJECTS
projects@emnano.com
Namakkal | Coimbatore | Palakkad
Support: +91 9003600700
1.
Accident Avoiding System in Heavy Cutting Machine
36. Automatic Vegetable (or) Lemon Cutting machine
2.
Accident Avoiding System in Punching Machine
37. Automatic Visitor Guided with Material Handling
3.
Accident preventing system for automatic pneumatic
Vehicle
printing press
38. Automatic Vulcanizing Machine
4.
Aero plane Controlling System (Glider Model)
39. Automatic Water level Indicator and Controlling System
5.
Auto charging grinding machine with solar power
40. Automatic Water level Sensing Crane
6.
Auto Indexing gear cutting attachment for pneumatic
41. Automatic wheel chair cum bed
shaping Machine
42. Combined hydraulic and disk break
7.
Automatic accident avoiding system for machines
43. Compressed air production using Vehicle Suspensor
8.
Automatic Acrylic Sheet Bending Machine (Heater
44. Conversion of tap or Salty bore well water into purest,
Control)
9.
tastiest bottled Quantity Drinking Water
Automatic bar feeding mechanism for hack saw machine
45. D & F of Abrasive Belt Grinder
10. Automatic Birds scrarer Machine
46. D & F of Abrasive Cutting Machine
11. Automatic Break Failure and Engine Over Heating
47. D & F of Activated Carbon Manufacturing Plant
Indication
48. D & F of Automatic Coil Winding Machine
12. Automatic Car Parking System for apartment Building
49. D & F of Automatic Drilling and Tapping machine
13. Automatic Cylinder Boring Machine
50. D & F of Automatic Embossing Drilling Machine
14. Automatic Dam Shutter Control System
51. D & F of Automatic Lubrication Machine
15. Automatic Dish Washing Machine
52. D & F of Chemical Powered System (CPS)
16. Automatic Double Axis Welding Machine
53. D & F of Circular Cutting machine
17. Automatic Gate Open/Close System
54. D & F of Contour Turning Attachment for Lathe
18. Automatic high speed Bottle Washing Machine
55. D & F of Gear type Injection Moulding Machine
19. Automatic Lamination Machine
56. D & F of Hot and Cold Water Dispenser
20. Automatic Moisture and Light Controlling System
57. D & F of Hydraulic Lift with Power Pack
21. Automatic Motorized Door Open/Close Mechanism
58. D & F of Hydraulic Press with Power Pack
22. Automatic Packing control machine for industrial
59. D & F of Injection Moulding Machine
application
60. D & F of Involute Gear Profile Error Detector
23. Automatic paint spraying pick and place Equipment
61. D & F of Manual Coil Winding Machine
24. Automatic Plant Water Moistering System for Garden
62. D & F of Micro Boring Attachment
25. Automatic pneumatic Gear Changer
63. D & F of Mini Hydraulic Press Machine
26. Automatic Pneumatic Grinding Machine
64. D & F of Multi-Engine Air Compressor
27. Automatic pneumatic multi-purpose press
65. D & F of Multipurpose Pneumatic Pressing Machine
28. Automatic Pneumatic Paper cup folding Machine
66. D & F of Pneumatic Auto Feed Drilling Machine
29. Automatic pneumatic vice and jack
67. D & F of Pneumatic Auto Feed Punching and Riveting
30. Automatic pneumatic welding robot
Machine
31. Automatic potato chips making machine
68. D & F of Pneumatic Auto Feed Punching Machine
32. Automatic Power Saving Conveyor for Industrial
69. D & F of Pneumatic Auto Feed Riveting Machine
Application
70. D & F of Pneumatic Multipurpose Press
33. Automatic Pressure controller Cum Valve Open/Close
Arrangement
72. D & F of Pneumatic Ramming Machine
34. Automatic rotating table with sequence operating machine
35. Automatic Scrap Collecting Vehicle
www.emnano.com
71. D & F of Pneumatic Printing Press Machine
73. D & F of Pneumatic Reciprocating Water Pumping
System
projects@emnano.com
Namakkal | Coimbatore | Palakkad
Support: +91 9003600700
74. D & F of Pneumatic Slow & High Speed Drilling Machine
111. Fabrication of Bending/Bend Removing Machine
75. D & F of Scissor Platform Machine
112. Fabrication of Bottling of sugarcane juice Machine
76. D & F of Scissor Platform with Hydraulic Power Pack
113. Fabrication of Brass Screw Threading And Tapping
77. D & F of Screw Slotting Machine
Machine
78. D & F of Self primary Centrifugal Pump
114. Fabrication of Cam Operated Valve
79. D & F of two stage Self Primary Pump
115. Fabrication of Coin Separator Machine
80. D & F of Wall grove Cutting Machine
116. Fabrication of Coir Making Machine
81. D & Fabrication of Hydraulic Lift using Pressure Booster
117. Fabrication of Cold Chamber Die casting Machine
82. D & Fabrication of Hydro-Pneumatic Vice using Pressure
118. Fabrication of Concave Attachment for Lathe
Booster
119. Fabrication of Concave Attachment in Shaper
83. D & Fabrication of Pneumatic Material Handling
Equipment
120. Fabrication of Copper Wire Cutting machine
121. Fabrication of Cylinder Block Boring Machine
84. D & Fabrication of Portable Slotting Machine
122. Fabrication of Cylindrical grinding Machine
85. Design & Fabrication of Conveyor Automation
123. Fabrication of cylindrical Tapping Machine
86. Design and Fabrication of Cam Vice
124. Fabrication of Detra fan for Industrial Application
87. Digital Controlled Coil Winding Machine
125. Fabrication of Domestic Floor Mill
88. Digital Locking System for material handling Vehicle
126. Fabrication of Dosai Maker
89. Electric Two Wheeler with Rechargeable Battery (Foldable
127. Fabrication of Eccentric Press Machine
Type)
128. Fabrication of Electric Two Wheeler with Rechargeable
90. Electrical Spot Welding Machine
Battery
91. Electronic assisted hydraulic braking system
129. Fabrication of Electromagnet Scrap Collecting Machine
92. Electronic Braking System
130. Fabrication of Electronic Hack Saw Machine
93. Energy Saving Light Arrangement
131. Fabrication of Escalator
94. Fabrication Folding Mobile with Gas and petrol
132. Fabrication of Fiber Extracting Machine
95. Fabrication of switch board Cutter
133. Fabrication of Floor Cleaning Machine
96. Fabrication of Abrasive Jet Machine
134. Fabrication of Fly Press Machine
97. Fabrication of Accident preventing system in cutting
135. Fabrication of friction Welding Machine
Machine
136. Fabrication of Grass Cutting Machine
98. Fabrication of Air leak Detector
137. Fabrication of Ground Dryer
99. Fabrication of Air Leak Detector
138. Fabrication of hand Operated edge Folding Machine
100. Fabrication of Arbor Presses Machine
139. Fabrication of High Speed Portable Pipe Cutting
101. Fabrication of Auto feed pneumatic Vice
Machine
102. Fabrication of Automatic Bottle Washing Machine
140. Fabrication of Home Floor Mill
103. Fabrication of Automatic cold chamber Die Casting
141. Fabrication of Hybrid Vehicle
Machine
142. Fabrication of hydraulic Disk Brake
104. Fabrication of Automatic Dish Washing Machine
105. Fabrication of Automatic Foot Dust Cleaning Machine
143. Fabrication of Hydraulic Hand Operated pipe Bending
Machine
106. Fabrication of Automatic punching/printing conveyor
144. Fabrication of Hydraulic Pallet Truck
107. Fabrication of Automatic Sofa Comports
145. Fabrication of Hydraulic Pipe Bending Machine
108. Fabrication of Automatic Spring Rolling Machine
146. Fabrication of hydraulic revolving multi-purpose trailer
109. Fabrication of Automatic Steering Mechanism
147. Fabrication of Hydraulic Vice with Power Pack
110. Fabrication of Automatic typical Pipe Cutting Machine
148. Fabrication of Hydro Coupling Mechanism
www.emnano.com
projects@emnano.com
Namakkal | Coimbatore | Palakkad
Support: +91 9003600700
149. Fabrication of Hydro Power Plant
189. Fabrication of Pneumatic Injection Moulding Machine
150. Fabrication of Lamination Machine
190. Fabrication of Pneumatic Machining Time Reduction in
151. Fabrication of lathe Coolant Pump with Fitting
Arrangement
Shaping machine
191. Fabrication of Pneumatic Multipurpose Grinder
152. Fabrication of Lawn Mover
192. Fabrication of Pneumatic Multipurpose Machine
153. Fabrication of level Operated conical bending Machine
193. Fabrication of Pneumatic Paper cup Making Machine
154. Fabrication of Maize de-Husker
194. Fabrication of Pneumatic Quick return Mechanism
155. Fabrication of mantles defense
195. Fabrication of Pneumatic Sheet Cutting Machine
156. Fabrication of Marine Engine Model
196. Fabrication of Pneumatic Slotting Machine
157. Fabrication of Milling Attachment for Lathe
197. Fabrication of Pneumatic Vice
158. Fabrication of Mini Hydraulic Hand Operated Zip Crane
198. Fabrication of Portable Service Unit
159. Fabrication of Mini milling machine
199. Fabrication of potato chips making machine
160. Fabrication of Mini Water Service Station
200. Fabrication of Radial Plunger Pump
161. Fabrication of Miniature Boiler
201. Fabrication of Road Marking Machine
162. Fabrication of Miniature Lathe
202. Fabrication of Rotary Gear Pump
163. Fabrication of mist coolant system
203. Fabrication of Rotary Kaller
164. Fabrication of Mosaic Polishing Machine
204. Fabrication of Rotary Vane Pump
165. Fabrication of Motorized Crane
205. Fabrication of Rubber Melting Machine
166. Fabrication of Motorized Screw Jack
206. Fabrication of sand collecting Machine
167. Fabrication of Motorized Sheet Rolling Machine
207. Fabrication of self feed Drilling Machine
168. Fabrication of Multi Drill Holder
208. Fabrication of Semi-Circular Cutting machine
169. Fabrication of Multi Nut Tightner
209. Fabrication of Sensor Operated Automatic Ramming
170. Fabrication of Multi-Engine Compressor
171. Fabrication of Multi-process Cutter
Machine
210. Fabrication of Sensor Operated Pneumatic Automatic
172. Fabrication of Multipurpose Sheet Metal Machine
Punching Machine
173. Fabrication of Multi-speed gear box
211. Fabrication of Sheet metal Cutting Machine
174. Fabrication of Non-Conventional Air compressor
212. Fabrication of Sheet Rolling Machine
175. Fabrication of Oil pump testing Equipment
213. Fabrication of Sheet Straightening Machine
176. Fabrication of Oil Pump Testing Equipment
214. Fabrication of Slotting Attachment in Drilling Machine
177. Fabrication of Pantograph Universal Gas Cutting Machine
215. Fabrication of Soar Air conditioner
178. Fabrication of Pedal Washing Machine
216. Fabrication of Special Purpose Tapping Machine
179. Fabrication of Pedestal Spot welding Machine
217. Fabrication of Spring End Grinding Machine
180. Fabrication of Pelton Wheel Turbine
218. Fabrication of spring Loaded Fan
181. Fabrication of pipe thread cutting Machine
219. Fabrication of spring separator
182. Fabrication of Plate Bending Machine
220. Fabrication of Spring Testing Machine
183. Fabrication of Pneumatic Auto Indexing Drilling Machine
221. Fabrication of spring testing machine
184. Fabrication of Pneumatic Bearing Press
222. Fabrication of Steam Power Plant
185. Fabrication of Pneumatic Bearing Puller
223. Fabrication of Sub-Marian (Model)
186. Fabrication of Pneumatic belt Conveyor
224. Fabrication of tomato Grader
187. Fabrication of Pneumatic Drill Jig
225. Fabrication of Tool Post Grinder
188. Fabrication of Pneumatic High Speed Reciprocation Hack
226. Fabrication of transformer heat reduction system
Saw Machine
www.emnano.com
227. Fabrication of Tube Rolling Machine
projects@emnano.com
Namakkal | Coimbatore | Palakkad
Support: +91 9003600700
228. Fabrication of Turbo Super Charger
267. Revolving gate compressor
229. Fabrication of Twin spindle Drill Holder
268. Robot Controlled Vacuum Cleaner
230. Fabrication of Universal Tapping Machine
269. Self centering 4-jaw chuck for lathe
231. Fabrication of U-Type, V-Type, L-type Angle Bending
270. Sensor Based Automatic paint marking machine for
Machine
sprocket Industries
232. Fabrication of Vacuum conveyor for industrial Application
271. Sensor Based Inspection Conveyor
233. Fabrication of Vacuum Pump
272. Shocks absorber testing Machine
234. Fabrication of Variable Drive Gear Box
273. Simple indexing stepper motor in shaper Machine
235. Fabrication of vegetable slice machine
274. Solar Powered Auto charging grinding machine
236. Fabrication of water cooler cum air conditioner
275. Spark Plug Tester
237. Fabrication of Water Cooler cum Air Conditioner
276. Temperature Controller with Cooling System
238. Fabrication of Wood Turning Lathe Machine
277. Waste chill recovery heat exchanger
239. Fabrication Pneumatic Leaf-Cup Making Machine
278. Water collar cum air conditioner
240. Fully automated chapathi making machine
241. Fully automated Drilling Machine
CONVERSIONAL AND NON CONVERSIONAL
242. Hybrid System for home
PROJECT
243. Hydraulic Puller for Automobile Engines
1.
Artificial Intelligent based Solar Vehicle
244. Industrial Boiler Flame Remote Adjustment System
2.
Auto charging grinding machine with solar power
245. Intelligent Motorized Wall Painting Crane
3.
Automatic Solar street light controller
246. Magnetic coolant filter
4.
Cell phone controlled Solar Vehicle
247. Magnetic Iron Separator
5.
Compressed air production using speed breaker
248. Mini Crushing Machine
6.
Domestic wind mill
249. Mirror cutting machine by using compressed air with
7.
Electrical Power Generation system using Railway track
8.
Electrical Power Generation using Foot Steps
250. Motorized Focus Light Mechanism (In All Direction)
9.
Electrical Power generation using Hydro Power Plant
251. Motorized Wheel Chair for Physically Disabled
10. Electrical Power generation using Railway Track
252. Paper Counting Machine
11. Electrical Power Generation using Speed Breaker
253. PC based wireless material handling vehicle for industrial
12. Electrical Power Generation using steam Power Plant
abrasive stone mixture
application
13. Electrical Power Generation using Thermal Power Plant
254. Pedestal Spot Welding Machine
14. Electricity and Water Pumping System using Wind Mill
255. Pneumatic Operated Chapathi Making Machine
15. Fabrication of Battery Cycle
256. Pneumatic Operated three Axis Modern Trailer
16. Fabrication Of Double Effecting Solar Cooker
257. Pneumatic Reciprocating Water Pumping System
17. Fabrication of Electric two Wheeler
258. Portable Circular Saw Machine
18. Fabrication of Electric Two Wheeler with Rechargable
259. Portable Pipe Cutting machine
Battery
260. Power Saving System for Lathe
19. Fabrication of Foot Step Power Generation
261. Quick Lifting Jack with Gear Arrangement
20. Fabrication of Gas kit for Four Wheeler
262. Remote control Dish Antenna Tracking System
21. Fabrication of Gas kit for Power Sprayer
263. Remote controlled air craft (Flying Model)
22. Fabrication of Gas kit for Two Wheeler
264. Remote controlled Material handling crane
23. Fabrication of Grid Interactive inverter (Wind Mill)
265. Remote controlled tilting wheel chair for physically disable
24. Fabrication of Hydro Power plant
266. Remote operated weapon system
25. Fabrication of Multi Functional Wind Mill
www.emnano.com
projects@emnano.com
Namakkal | Coimbatore | Palakkad
Support: +91 9003600700
26. Fabrication of PC based solar car
62. Fabrication of Solar Water Heater
27. Fabrication of PC based solar E-Car
63. Fabrication of Solar Wheel Chair for physically Disabled
28. Fabrication of Pelton Wheel Turbine
64. Fabrication of Wind Energy Vehicle
29. Fabrication of Solar Air Cooler
65. Fabrication Solar automatic head-lamp alignment system
30. Fabrication of Solar Air Cooler and Heater with Auto
66. Horizontal Turbine Type Domestic Wind Mill
Tracking
67. Hybrid system for home (Wind mill with Solar Power)
31. Fabrication of Solar Air Cooler with Heater
68. Non conventional Air compressor
32. Fabrication of Solar Air Dryer
69. PC based wireless solar powered vehicle
33. Fabrication of Solar Air Dryer with Auto tracking System
70. SMS based solar pick and place robot
34. Fabrication of Solar Automated Track Guided Vehicle
71. SMS controlled solar moving vehicle for industrial
(Solar ATGV)
Application
35. Fabrication of Solar automatic cell phone charger with pay
system
72. SMS controlled solar Vehicle
73. Solar Agricultural Water Pumping System
36. Fabrication of Solar Automatic Dish Washing Machine
37. Fabrication of Solar Automobile Fridge
74. Solar Agricultural Water Pumping System With Auto
tracking
38. Fabrication of Solar Birds Scrarer
75. Solar air cooler with auto changeover system
39. Fabrication of Solar Board Cleaner
76. Solar Air cooler With Auto tracking
40. Fabrication of Solar Car
77. Solar Automated Guided Vehicle (Solar AGV)
41. Fabrication of Solar Cycle
78. Solar Automatic Traffic and Street Light Controller
42. Fabrication of Solar Fan with Lighting System
79. Solar Automobile air conditioner
43. Fabrication of Solar fertilizer Sprayer
80. Solar Electric go bed Drive
44. Fabrication of Solar Hybrid Car
81. Solar Intelligent Vehicle (car model)
45. Fabrication of solar irrigation System
82. Solar lighting with battery auto changeover system
46. Fabrication of Solar Kettle (or) Solar Parabolic Collector
83. Solar Multi-Purpose Sprayer (or) Solar Seed and
47. Fabrication of Solar Lighting System
Fertilizer Sprayer
48. Fabrication of Solar Lighting System with Auto Tracking
49. Fabrication of Solar Panel Auto tracking
84. Solar Powered Automatic head light Dim/Bright
Controller
50. Fabrication of Solar Power Generation With Auto Tracking
85. Solar Powered Automatic Railway Gate Controller
51. Fabrication of solar powered remote operated weapon
86. Solar Powered Automatic Rain Operated Wiper
system
87. Solar Powered Fire Fighting Robot
52. Fabrication of Solar race car
88. Solar Powered Path Finding Robot
53. Fabrication of Solar railway track crack detecting vehicle
89. Solar powered remote controlled bomb detecting robot
54. Fabrication of solar remote controlled pick and place video
90. Solar Powered Unaided Guided Vehicle (Solar UGV)
analyzing vehicle
91. Solar Powered Visitor Guided with Material Handling
55. Fabrication of Solar Seed Dryer
Vehicle
56. Fabrication of Solar Seed Dryer with Auto tracking
92. Solar Refrigeration system
57. Fabrication of Solar Seeds Sprayer
93. Solar Water cooler cum room cooling system
58. Fabrication of Solar Train
94. Solar Water Purification by using thermal method
59. Fabrication of solar UPS
95. Water Turbine Power generation System
60. Fabrication of Solar Water Disalation (Purification)
96. Wind Mill Power Generation System
61. Fabrication of Solar water disalation by using Photovoltaic
97. Wind Turbine Power Generation System
method
www.emnano.com
projects@emnano.com
Namakkal | Coimbatore | Palakkad
Support: +91 9003600700
27. Automatic Vehicle Accident Information System
28. Automatic Vehicle Accident prevention system
29. Automatic Vehicle Over speed Controlling System
30. Automatic Vehicle Speed measuring using IR Rays
THERMAL REFREGERATION BASED PROJECTS
31. Automatic Visitor Guided with material handling
Vehicle
AUTOMOBILE PROJECTS
1.
Aero plane Controlling System (Flying Model)
32. Cell Phone Controlled jumping Robot
2.
AI Based Fire fighting AGV
33. Cell phone controlled pick and place robot
3.
AI Based Path Finding Vehicle
34. Cell Phone Controlled pick and place Robot
4.
Anti-Lock Braking System In Four wheeler (ABS)
35. Cell phone controlled Solar Vehicle
5.
Artificial Intelligent Based Automatic Path finding Cum
36. Combined hydraulic and disk break
Video Analyzing vehicle
37. Compressed air production using vehicle suspensor
6.
Artificial Intelligent based Solar Vehicle
38. Cordless Communication System for Cars (Car Security
7.
Auto clutch for Automobile
8.
Automated Guided Vehicle (AGV)
100. D & F of Chemical Processing Plant
9.
Automatic Break Failure indicator and Engine Over
39. D & F of Triangular air Compressor with Common
System)
Heating Alarm
Compression Chamber
10. Automatic Differential Unit locking system for Automobile
40. Digital Fuel Level Indicator
11. Automatic Distance Measurement and Braking System By
41. Digital locking (Fuel, ignition, side lock) system
using Ultrasonic Waves
(Password) for Two wheeler
12. Automatic Electro-magnetic Clutch
42. Digital locking system for material handling vehicle
98. Automatic Electro-plating coating process
43. Efficiency increasing system in automobile
13. Automatic head light dim and bright controller with engine
44. Efficiency Increasing System in Automobile by using
overheating alarm
preheating method
14. Automatic material handling Fire Fighting Robot
45. Electrical Power Generation system using Railway track
15. Automatic paint spraying pick and place Equipment
101. Electrical Power Generation using Steam Power Plant
16. Automatic pneumatic vulcanizing Machine
102. Electrical Power Generation using Thermal Power Plant
99. Automatic pneumatic vulcanizing Machine using heat
46. Electro-Hydraulic System for Automation in Four
sensor
Wheeler
17. Automatic Pneumatic welding Robot
47. Electronic assisted hydraulic braking system
18. Automatic Railways Signaling System
48. Electronic Fuel Injection (EFI) system for Two wheeler
19. Automatic Rain Operated Wiper
49. Emergency Braking System in Four Wheeler (EBS)
20. Automatic Rain operated wiper and Head light Dim/Bright
103. Fabrication of Activated Carbon Manufacturing Plant
Controller
104. Fabrication of Air Dryer
21. Automatic Scrap collecting Vehicle
50. Fabrication of Automatic car overtaking system
22. Automatic sensor based wall painting robot
51. Fabrication of Automatic Electro-Hydraulic Jack for
23. Automatic sky Car Parking System
Four Wheeler
24. Automatic steering control Mechanism using sensor
25. Automatic temperature controller with cooling system for
car
for automobile
105. Fabrication of automatic humidification system
26. Automatic Track Guided Vehicle (ATGV)
www.emnano.com
52. Fabrication of Automatic head lamp alignment system
projects@emnano.com
Namakkal | Coimbatore | Palakkad
53. Fabrication of Automatic Magnetic Accident preventer for
Train
Support: +91 9003600700
80. Fabrication of hydraulic screw jack
81. Fabrication of Intelligent Motorized Hydraulic Jack
54. Fabrication of Automatic pneumatic jack
82. Fabrication of Kids Car
55. Fabrication of Automatic Railway Gate Controller
113. Fabrication of L.L.D.P. Material extruder
56. Fabrication of Automatic steering control system for
114. Fabrication of Lube oil cooler
automobile
83. Fabrication of Lube oil cooler
106. Fabrication of Automatic temperature controller with
cooling system
84. Fabrication of man less defense
115. Fabrication of Micro Wave Oven
57. Fabrication of Automatic Vehicle Over speed controlling
system for School Zone
116. Fabrication of Mini Boiler
117. Fabrication of Mini Water Heater
58. Fabrication of Battery Car
85. Fabrication of Motorized Jack
107. Fabrication of Bottle Cooler
86. Fabrication of Multi Nut (Wheel) Tightner
59. Fabrication of Car Automation
87. Fabrication of Multi-Engine compressor
60. Fabrication of Catelite converter for Automobile
88. Fabrication of oil pump and water pump for jeep and
108. Fabrication of Cooling tower
tractor
109. Fabrication of double effecting solar cooker
89. Fabrication of Path Finding Robot
110. Fabrication of double reflection solar Cooker
90. Fabrication of Path finding Vehicle
61. Fabrication of Electric Two Wheeler
91. Fabrication of PC based pick and place sequence robot
62. Fabrication of Electrical Steering Mechanism
118. Fabrication of refrigeration system (trainer)
63. Fabrication of Electro-Hydraulic Braking system for Four
92. Fabrication of Sensor Operated AGV
Wheeler
119. Fabrication of Solar air conditioning Machine
64. Fabrication of Electro-Magnetic braking System For
Automobile
120. Fabrication of Solar Air Cooler
121. Fabrication of Solar Air Cooler cum Heater
65. Fabrication of Electronic ignition system
122. Fabrication of Solar Fridge
66. Fabrication of Emission control of Diesel Engine
93. Fabrication of Solar Hybrid Car
67. Fabrication of Foldable Electric Go Bed Drive
94. Fabrication of Solar Powered Automobile Air Cooler
68. Fabrication of Foldable two wheeler
95. Fabrication of Solar Race Car
69. Fabrication of four wheel steering system
123. Fabrication of Solar refrigeration system
70. Fabrication of Fuel Injector testing equipment
124. Fabrication of Solar Water Disalation (Purification)
71. Fabrication of Fully Automated Intelligent Vehicle (Car
125. Fabrication of solar water disalation by using
Model)
photovoltaic method
72. Fabrication of Gas kit circuit board for two and Four
Wheeler
96. Fabrication of Sub-Marine (Model)
97. Fabrication of three axis pneumatic modern trailer
73. Fabrication of Gas kit for Four Wheeler
74. Fabrication of Gas kit for two Wheeler
75. Fabrication of Gear Level Indicator for Automobile
76. Fabrication of Go Ped Drive
98. Fabrication of Two Engine Synchronization for Four
Wheeler
99. Fabrication of Two Wheeler Automation with Security
System
111. Fabrication of Ground Dryer
100. Fabrication of Unaided Guided Vehicle(UGV)
112. Fabrication of Hot and Cold Water Dispenser
101. Fabrication of Vulcanizing machine
77. Fabrication of Hybrid Vehicle
126. Fabrication of Water cooler cum Air Cooler
78. Fabrication of Hydraulic Break show riveting Machine
127. Fabrication of Water Heater
79. Fabrication of Hydraulic Cylinder Liner Puller
102. Fabrication of Wind Energy Vehicle
www.emnano.com
projects@emnano.com
Namakkal | Coimbatore | Palakkad
Support: +91 9003600700
103. Fabrication turbo charger for two wheeler
130. Two Wheeler Automation with security System
104. High Speed Indication and automatic Pneumatic Braking
131. Video analyzing remote controlled vacuum cleaner
System
132. Voice Controlled Material handling vehicle
105. Highways High Speed Sensing and Automatic Speed
Braking System
136. Waste chill recovery heat exchanger
137. Water Cooler cum Air Conditioner
106. Intelligent Active Suspension system for two wheeler
107. Intelligent Braking System in Four Wheeler (IBS)
138. Water cooler cum Water heater by using refrigeration
System
108. Intelligent Way Searching Pick and Place Robot
128. Mist Coolant system
PNEUMATIC AND HYDRAULIC BASED
129. Modern Thermal Power Plant (Model)
PROJECTS
109. Motorized Screw Jack
130. Multi-Purpose Ground Dryer (or) Multi-Purpose Dryer and
Room Heater
133. Accident avoiding System for heavy Cutting Machine
134. Accident Avoiding System for Punching Machine
110. Over speed indication and Automatic accident Avoiding
System for four wheeler
135. Auto Indexing gear cutting attachment for pneumatic
shaping Machine
131. Paper cup folding Machine by using heater
136. Automatic bar feeding mechanism for hack saw machine
111. PC based cordless pick and place Jumping Robot
137. Automatic Distance Measurement and Pneumatic
112. PC based pick and place jumping robot
113. PC Based wireless material handling vehicle
114. PC based wireless Pick and Place Robot
115. Pick and Place jumping robot with remote control
116. Quick lifting jack with Gear Arrangement
117. Railways accident Avoiding System – (Level crossing and
Fire Alarm)
Braking System By using Ultrasonic Waves
138. Automatic Electro-Hydraulic Braking System for Four
Wheeler
139. Automatic Paint marking machine for sprocket
manufacturing industries
140. Automatic paint spraying Equipment
141. Automatic Pneumatic Cold Chamber Die Casting
118. Remote controlled air craft (Flying Model)
Machine
119. Remote controlled Pick and Place video analyzing robot
142. Automatic Pneumatic Paper cup folding Machine
120. Remote Controlled Solar Vehicle
143. Automatic pneumatic Spring End Grinding Machine
121. Remote operated weapon system
144. Automatic pneumatic vice and jack
122. Robot Controlled Vacuum Cleaner-RS-8000
145. Automatic pneumatic vulcanizing Machine
123. Sand Collecting Vehicle-RS-7500
146. Automatic pneumatic welding machine
124. Sensor Operated Automatic Reverse Braking System-
147. Automatic Pneumatic Welding Robot
RS8500
148. Automatic sensor based wall painting robot
125. Sensor Operated Track Guided Vehicle
149. Automatic Sensor Operated Pneumatic Braking System
126. Shock Absorber Test rig using Cam and sensors
150. Cell phone controlled pneumatic 4-Axis material
127. SMS based automatic two wheeler locking system-RS7000
Handling Equipment
151. Cell phone controlled pneumatic 4-Axis material
128. SMS based vehicle Ignition controlling system
Handling Equipment
129. SMS controlled moving vehicle for industrial application
152. Combined hydraulic and disk break system
132. Solar Air Condition-RS-5000
153. Compressed air production using vehicle suspensor
133. Solar Kettle (or) Solar Parabolic Collector-RS-7000
154. D & F of Automatic Lubrication System
134. Solar Water Purification by using thermal method-RS-8000
155. D & F of Automatic Pneumatic Ramming Machine
135. Transformer heat reduction system-RS-7000
156. D & F of Automatic Pneumatic Riveting Machine
www.emnano.com
projects@emnano.com
Namakkal | Coimbatore | Palakkad
Support: +91 9003600700
157. D & F of Hydraulic Injection Moulding Machine
191. Fabrication of Automatic Pneumatic Shaping Machine
158. D & F of Hydraulic Lift with Pressure Booster
192. Fabrication of Automatic Pneumatic Stand for two
159. D & F of Hydraulic Press with Power Pack
160. D & F of Hydraulic Scissor Lifter
wheeler
193. Fabrication of Automatic Reverse Braking System for
161. D & F of Hydraulic Scissor plat form Machine With Power
Pack
Automobile
194. Fabrication of CNC Drilling Machine
162. D & F of Hydro-Pneumatic Vice with Pressure Booster
195. Fabrication of CNC pneumatic packing control machine
163. D & F of Mini Hydraulic Press
196. Fabrication of CNC pneumatic punching machine
164. D & F of Pneumatic Auto feed Drilling Machine
197. Fabrication of Conveyer Operated Robot Hand Model
165. D & F of Pneumatic Auto Feed Punching Machine
198. Fabrication of Hydraulic Break show Riveting Machine
166. D & F of Pneumatic Automatic Printing Press
199. Fabrication of Hydraulic Cylinder Liner Puller
167. D & F of Pneumatic Automatic punching and riveting
200. Fabrication of Hydraulic Hand Operated Bus Bar Bender
Machine
201. Fabrication of Hydraulic Ladder
168. D & F of Pneumatic Bearing Press System
202. Fabrication of Hydraulic Lift with Power pack
169. D & F of Pneumatic Bearing Puller
203. Fabrication of Hydraulic oil pump testing Equipment
170. D & F of Pneumatic Four-Axis Material Handling
204. Fabrication of Hydraulic Pallet Truck
Equipment
205. Fabrication of Hydraulic Pipe Bending Machine
171. D & F of Pneumatic High Speed Hack Saw Machine
206. Fabrication of Hydraulic Pressure Testing Pump
172. D & F of Pneumatic Injection Moulding Machine
207. Fabrication of Hydraulic Puller for Automobile
173. D & F of Pneumatic Multipurpose Press System
208. Fabrication of hydraulic revolving multi-purpose trailer
174. D & F of Pneumatic reciprocating Hack saw Machine
209. Fabrication of Hydraulic Trolley Type Jack
175. D & F of Pneumatic Vice
210. Fabrication of hydro coupling mechanism
176. Electro hydraulic System for Automation in Vehicle
211. Fabrication of Intelligent Motorized Hydraulic jack
177. Electro-Hydraulic System Based Anti-Lock Braking
212. Fabrication of Mini Hydraulic Hand Operated Zip Crane
System (ABS)
213. Fabrication of mirror cutting machine by using
178. Electro-Hydraulic System for Automation
compressed air
179. Electronic Assisted hydraulic breaking system
214. Fabrication of Motorized Hydraulic Jack
180. Fabrication of Abrasive Jet Machine
215. Fabrication of Motorized Zip Crane
181. Fabrication of Auto feed pneumatic vice
216. Fabrication of Paper Cup Making Machine
182. Fabrication of Automatic Electro Hydraulic Braking
217. Fabrication of PC based auto feed pneumatic vice
System
218. Fabrication of PC based pneumatic Ramming Machine
183. Fabrication of Automatic Electro hydraulic Jack
219. Fabrication of Pneumatic 4-axis JCB Equipment
184. Fabrication of Automatic Jack for Four Wheeler
220. Fabrication of Pneumatic Auto feed Bottle washing
185. Fabrication of automatic Multi-purpose press
186. Fabrication of Automatic Pneumatic Bottle Washing
machine
221. Fabrication of Pneumatic Auto feed Metal Forming
Machine
187. Fabrication of Automatic Pneumatic Chapathi making
machine
222. Fabrication of Pneumatic Auto Feed Riveting Machine
223. Fabrication of Pneumatic Auto gear changer
188. Fabrication of Automatic Pneumatic Hammer
189. Fabrication of Automatic Pneumatic Jack
190. Fabrication of automatic pneumatic reciprocating grinding
machine
www.emnano.com
Machine
224. Fabrication of Pneumatic Automatic sheet Cutting
Machine
225. Fabrication of Pneumatic automatic Vegetable Cutting
Machine
projects@emnano.com
Namakkal | Coimbatore | Palakkad
226. Fabrication of Pneumatic Ball Printing Robot
Support: +91 9003600700
258. Pneumatic based automatic Pick and Place paint
227. Fabrication of Pneumatic Belt Conveyor
spraying Equipment
228. Fabrication of Pneumatic Belt Conveyor
259. Pneumatic based Intelligent Active Suspension system
229. Fabrication of Pneumatic Bending/Bend Removing
for two wheeler
Machine
260. Pneumatic Multipurpose Grinding Machine
230. Fabrication of Pneumatic Cutting and Grinding Machine
261. Pneumatic Operated Emergency Braking System (EBS)
231. Fabrication of Pneumatic Machining Time Reduction in
262. Pneumatic Operated Intelligent Braking System (IBS)
shaping Machine
263. Quick Lifting Hydraulic jack with gear arrangement
232. Fabrication of Pneumatic Mobile Crane
264. Remote controlled paint spraying Robot
233. Fabrication of Pneumatic Multipurpose Machine
265. Sensor Operated Auto feed Punching Machine
234. Fabrication of Pneumatic Operated Automatic packing
266. Sensor Operated Automatic Ramming Machine
Control Machine
267. SMS controlled pneumatic Ramming Machine
235. Fabrication of Pneumatic operated Conveyor Automation
236. Fabrication of Pneumatic Operated Inspection conveyor
AGRICULTURE PROJECTS
237. Fabrication of Pneumatic Pick and Place Robot
1.
Automatic bottle washing machine
238. Fabrication of Pneumatic punch die
2.
Automatic Moisture and Light Controlling System for
239. Fabrication of Pneumatic Reciprocating Water Pumping
System
Garden
3.
Automatic Packing control Machine
240. Fabrication of Pneumatic Sander and Polisher Machine
4.
Automatic Vegetable (or) Lemon Cutting machine
241. Fabrication of Pneumatic Screw Driver Machine
5.
Automatic Water level Sensing Crane
242. Fabrication of Pneumatic Slotting Machine
6.
Automatic Water Tape Controlling System
243. Fabrication of Pneumatic trainer kit with air compressor
7.
Chisel Plough
244. Fabrication of Radial Plunger Pump
8.
Coconut tree Sprayer
245. Fabrication of Remote Operated Belt Conveyor
9.
D & F of Gas Converted Power Sprayer
246. Fabrication of Sticker Making Machine
10. Electricity and Water Pumping System using Wind Mill
247. Fabrication of three axis pneumatic Modern Trailer
11. Fabrication of Agricultural Motor Pump Running using
248. Fabrication Pneumatic Leaf-Cup Making Machine
249. Fabrication Pneumatic Operated Automatic differential unit
locking System
Solar Power
12. Fabrication of Hydraulic 3 axis Modern Trailer
13. Fabrication of Maize de-Husker
250. Highways high speed indication and Automatic Pneumatic
Braking System
14. Fabrication of rotary Kaller
15. Fabrication of Seeds Sprayer
251. Highways high Speed sensing and Automatic Pneumatic
braking System
16. Fabrication of Solar Agro Sprayer
17. Fabrication of solar irrigation System
252. PC based Accident preventing system in Pneumatic cutting
machine
18. Fabrication of Solar Seed Dryer
19. Fabrication of Solar seed Dryer with Auto Tracking
253. Pneumatic 3/8-th inc Reversible Drilling Attachment
20. Fabrication of Solar Seeds Sprayer
254. Pneumatic Auto feed lemon Cutting Machine
21. Fabrication of Tomato grader
255. Pneumatic Auto feed Reciprocating Water Pumping
22. Fabrication of vegetable slicing Machine
System
23. Groundnut Harvester
256. Pneumatic Auto feed Sheet Cutting Machine
24. Groundnut Thruster
257. Pneumatic Auto indexing Drilling Machine
25. Paddy Harvester
www.emnano.com
projects@emnano.com
Namakkal | Coimbatore | Palakkad
26. Solar Powered Agricultural Water Pumping System with
Auto Tracking
27. Water Pumping system using Wind Power
www.emnano.com
projects@emnano.com
Support: +91 9003600700