Hellenic Accreditation System
Annex B4/12 to the Certificate No. 31-4
SCOPE of ACCREDITATION
of
TÜV HELLAS (TÜV NORD) S.A.
as a Products Certification Body
in line with E.C. Directives
Field of certification
Lifts
Type of Certification
Normative Regulations / Standards /
In-House Procedures
-EC Type Examination (Annex
VB)
-Final inspection (Annex VI)
-Unit verification (Annex Χ)
Directive 95/16/ΕC,
MD 32803/1308/97 G.G 815/B/97
Lift safety components
Type examination (Annex VA)
Conformity to type with random
checking (Annex XI)
Directive 95/16/EEC
M.D. 32803/1308/97 (G.G. 815/Β/97)
ELOT ΕΝ 81-1:1999 + Α3:2010
ELOT ΕΝ 81-2:1999 + Α3:2010
Simple pressure vessels
- EC Type examination (Chapter
II, article 10)
- EC Verification (Chapter III,
article 11)
Directive 2009/105/EC
Standards:
ΕΝ 286-1:1998/AC:2002
ASME VIII: 2013 (Division 1)*
AD MERKBLÄTT*
1. Electric lifts
2. Hydraulic lifts
Page 1 of 7
ELOT ΕΝ 81-1:1999 + Α3:2010
ELOT ΕΝ 81-2:1999 + Α3:2010
ELOT ΕΝ 81-70:2004
ELOT ΕΝ 81-28:2003
ELOT ΕΝ 12016:2004
Annex B4/12 according to the Certificate ESYD No. 31-4
7.8.2015
Field of certification
Pressure equipment
Groups – Subgroups**
Type of Certification
-Internal production control
(Annex ΙΙΙ, Module Α1)
-EC type-examination (Annex ΙΙΙ,
Module B)
-EC design-examination (Annex
ΙΙΙ, Module B1)
-Conformity to type (Annex ΙΙΙ,
Module Γ1)
-Product verification (Annex ΙΙΙ,
Module F)
-EC unit verification (Annex ΙΙΙ,
Module G)
Normative Regulations / Standards /
In-House Procedures
Directive 97/23/EEC,
M.D. 16289/330/99 (G.G. 987/Β/99)
1) Unfired pressure vessels
Group: 1.1
Subgroup: 1.1.2, 1.1.3
ΕΝ 13445-1:2009,
EN 13445-2:2009+A2:2012,
EN 13445-3:2009+A1:2012,
EN 13445-4:2009+A1:2011,
EN 13445-5:2009+A3:2011,
EN 13445-6:2009
AD ΜΕRΚΒLATT*, ASME VIII:2013 *
2) Shell boilers
Group: 1.2
Subgroup: 1.2.1,1.2.2
ΕΝ 12953-1:2012, EN 12953-2:2012,
EN 12953-3:2002, EN 12953-4:2002,
EN 12953-5:2002, EN 12953-6:2011
TRD*, ASME I:2013*
3) Metallic industrial piping
Group:1.3
Subgroups: 1.3.1, 1.3.2
ΕΝ 13480-1:2012
ΕΝ 13480-2:2012+A1:2013
ΕΝ 13480-3:2012
ΕΝ 13480-4:2012+A1:2013
ΕΝ 13480-5:2012+A1:2013
ASME B31.1:2013*, ASME B31.3:2013*,
ASME B31.4:2013*, ASME B31.8:2013*
4) Pressure Assemblies
Group: 2.1
Subgroups: 2.1, 2.2
Group: 3
Page 2 of 7
- Approval of permanent joining
procedures
(Annex Ι, paragraph 3, section 3.1.2)
EN ISO 15614-1:2004+A2:2012,
EN ISO 15614-2:2005
EN ISO 15609-1:2004+Cor1:2005*,
ΕΝ ISO 15609-2:2001*
- Approval of permanent joining
personnel
(Annex Ι, paragraph 3, section 3.1.2)
ΕΝ 287-1:2011
EN ISO 9606-2:2004*
Annex B4/12 according to the Certificate ESYD No. 31-4
7.8.2015
Field of certification
Type of Certification
Construction products
Product certification body
(System 1+)
Normative Regulations / Standards /
In-House Procedures
Cement
Regulation (EU) 305/2011
Decision 97/555/EC
ΕΝ 197-1:2011
Masonry cement
ΕΝ 413-1: 2011
Ground granulated blast furnace
slag for use in concrete, mortar
and grout
Fly ash for concrete
Decision 99/469/ΕC
EN 15167-1:2006
Thermal insulation products for
buildings
ΕΝ 450-1:2012
Product certification body
(System 1)
Decision 99/91/ΕC
- Factory made mineral wool
(MW) products - Specification
- Factory made products of
expanded polystyrene (EPS) Specification
EN 13162:2012
- Factory made products of
extruded polystyrene foam
(XPS) - Specification
EN 13164:2012
- Factory made rigid
polyurethane foam (PUR)
products – Specification
EN 13165:2012
Lighting columns
- Requirements for reinforced
and prestressed concrete
lighting columns
- Requirements for steel lighting
columns
- Requirements for aluminium
lighting columns
- Requirements for fibre
reinforced polymer composite
lighting columns
Road Equipment
Road traffic signs
Decision 96/579/ΕC
EN 40-4:2005
EN 40-4:2005/AC: 2006
Traffic control equipment
ΕΝ 12368:2006
EN 12352:2006
Road marking materials
ΕΝ 1463-1:2009
EN 1423:2012
EN 1423:2012/AC:2013
Vehicle restraint systems
ΕΝ 1317-5:2007+A2:2012
ΕΝ 1317-5:2007+A2:2012/AC:2012
Page 3 of 7
EN 13163:2012
EN 40-5:2002
EN 40-6:2002 (according to Regulation’s
article 46)
EN 40-7:2002
ΕΝ 12899-1:2007, ΕΝ 12899-2:2007, ΕΝ
12899-3:2007, EN 12966-1:2005+A1:2009
Annex B4/12 according to the Certificate ESYD No. 31-4
7.8.2015
Field of certification
Type of Certification
Construction products (cont.)
Product certification body
(System 1)
Fire detection and fire alarm
systems
Screed Material and Floor
Screeds
Products related to concrete,
mortar and grout:
Fibres for concrete: Steel fibres
Fibres for concrete: Polymer
fibres
Admixtures for concrete, mortar
and grout
-Concrete admixtures
- Admixtures for masonry
mortar
- Admixtures for grout for
prestressing tendons
- Admixtures for sprayed
concrete
Products and systems for the
protection and repair of
concrete structures
Regulation (EU) 305/2011 (cont.)
Decision 96/577/ΕC
ΕΝ 54-2:1997, ΕΝ 54-2:1997/A1:2006,
ΕΝ 54-2:1997/AC:1999
EN 54-3:2001/A1:2002
EN 54-3:2001/A2:2006
EN 54-4:1997, EN 54-4:1997/A1:2002
EN 54-4:1997/A2:2006
EN 54-4:1997/AC:1999
EN 54-5:2000/A1:2002
EN 54-7:2000/A1:2002,
EN 54-7:2000/A2:2006
EN 54-11:2001, EN 54-11:2001/A1:2005
EN 54-17:2005, EN 54-17:2005/AC:2007
EN 54-18:2005, EN 54-18:2005/AC:2007
EN 54-21:2006
Decision 97/808/EC
EN 13813:2002
Decision 99/469/EC
ΕΝ 14889-1:2006
ΕΝ 14889-2:2006
Factory production control
certification body
(System 2+)
Decision 99/469/ΕC
EN 934-2:2009+A1:2012
EN 934-3:2009+A1:2012
ΕΝ 934-4:2009
ΕΝ 934-5:2007
Cold formed welded structural
hollow sections of non-alloy
and fine grain steels
Hot rolled products of structural
steels
Execution of steel structures
and aluminium structures
Aluminium and aluminium
alloys - Structural products for
construction works
Page 4 of 7
Normative Regulations / Standards /
In-House Procedures
ΕΝ 1504-2:2004
ΕΝ 1504-3:2005
ΕΝ 1504-4:2004
ΕΝ 1504-5:2004
ΕΝ 1504-6:2006
ΕΝ 1504-7:2006
Decision 98/214/ ΕC
EN 10219-1:2006
ΕΝ 10025-1:2004
ΕΝ 1090-1:2009+Α1:2011
ΕΝ 15088:2005
Annex B4/12 according to the Certificate ESYD No. 31-4
7.8.2015
Field of certification
Construction products (cont.)
Precast concrete products:
Foundation piles
Type of Certification
Factory production control
certification body
(System 2+)
Normative Regulations / Standards /
In-House Procedures
Regulation (EU) 305/2011 (cont.)
Decision 99/94/EC
Hollow core slabs
EN 12794:2005+A1:2007
ΕΝ 12794:2005+Α1:2007/ΑC:2008
EN 1168:2005+A3:2011
Floor slats for livestock
EN 12737:2004+A1:2007
Elements for fences
EN 12839:2012
Masts and poles
EN 12843:2004
Ribbed floor elements
ΕΝ 13224:2011
Linear structural elements
EN 13225:2004
EN 13225:2004/AC:2006
EN 13225:2013
Special roof elements
ΕΝ 13693:2004 +Α1:2009
Floor plates for floor systems
ΕΝ 13747:2005+Α2:2010
Stairs
ΕΝ 14843:2007
Box culverts
ΕΝ 14844:2006+Α2:2011
Foundation elements
ΕΝ 14991:2007
Wall elements
ΕΝ 14992:2007+A1:2012
Beams
ΕΝ 15037-1:2008
Concrete blocks
ΕΝ 15037-2:2009+Α1:2011
Clay blocks
ΕΝ 15037-3:2009+Α1:2011
Expanded polystyrene blocks
ΕΝ 15037-4:2010
ΕΝ 15037-4:2010+A1:2013
Bridge elements
ΕΝ 15050:2007+A1:2012
Retaining wall elements
ΕΝ 15258:2008
Wood-based panels for use in
construction - Characteristics,
evaluation of conformity and
marking
Decision 97/462/ ΕC
ΕΝ 13986:2004
Page 5 of 7
Annex B4/12 according to the Certificate ESYD No. 31-4
7.8.2015
Field of certification
Type of Certification
Construction products (cont.)
Factory production control
certification body
(System 2+)
Lightweight aggregates for
concrete, mortar and grout
Normative Regulations / Standards /
In-House Procedures
Regulation (EU) 305/2011 (cont.)
Decision 98/598/ΕC
ΕΝ 13055-1:2002
ΕΝ 13055-1:2002/AC:2004
Lightweight aggregates for
bituminous mixtures and
surface treatments and for
unbound and bound
applications
ΕΝ 13055-2:2004
Aggregates for mortar
ΕΝ 13139:2002, ΕΝ 13139:2002/AC:2004
Aggregates for railway ballast
EN 13450:2002, EN 13450:2002/AC:2004
Aggregates for concrete
ΕΝ 12620:2002+A1:2008
Aggregates for bituminous
mixtures and surface treatments
for roads, airfields and other
trafficked areas
ΕΝ 13043:2002, ΕΝ 13043:2002/AC:2004
Aggregates for unbound and
hydraulically bound materials
for use in civil engineering
work and road construction
EN 13242:2002+A1:2007
Decision 98/601/ΕC
Bituminous mixtures
- Asphalt Concrete
- Asphalt Concrete for very thin
layers
- Soft Asphalt
- Hot Rolled Asphalt
- Stone Mastic Asphalt
- Mastic Asphalt
- Porous Asphalt
Bitumen and bituminous
binders
Page 6 of 7
EN 13108-1:2006
EN 13108-1:2006/AC:2008
EN 13108-2:2006
EN 13108-2:2006/AC:2008
EN 13108-3:2006
EN 13108-3:2006/AC:2008
EN 13108-4:2006
EN 13108-4:2006/AC:2008
EN 13108-5:2006
EN 13108-5:2006/AC:2008
EN 13108-6:2006
EN 13108-6:2006/AC:2008
EN 13108-7:2006
EN 13108-7:2006/AC:2008
ΕΝ 13924:2006
EN 13924:2006/AC:2006
ΕΝ 13808:2005
ΕΝ 14023:2010
ΕΝ 12591:2009
ΕΝ 15322:2009
ΕΝ 15322:2013
Annex B4/12 according to the Certificate ESYD No. 31-4
7.8.2015
Field of certification
Type of Certification
Construction products (cont.)
Factory production control
certification body
(System 2+)
Normative Regulations / Standards /
In-House Procedures
Regulation (EU) 305/2011 (cont.)
Decision 95/467/ ΕC
External Thermal Insulation
Composite Systems with
Rendering-ETICS
Decision 97/556/ ΕC
ETAG 004 :2011
Chimneys - Requirements for
metal chimneys
- System chimney products
ΕΝ 1856-1:2009
- Metal flue liners and
connecting flue pipes
- Chimneys - Clay/ceramic flue
blocks for single wall chimneys
ΕΝ 1856-2:2009
Specification for masonry units
- Clay masonry units
Decision 97/740/ ΕC
ΕΝ 771-1:2011
- Calcium silicate masonry units
EN 771-2:2011
-Aggregate concrete masonry
units (Dense and light-weight
aggregates)
- Autoclaved aerated concrete
masonry units
- Manufactured stone masonry
units
- Natural stone masonry units
EN 771-3:2011
- Specification for mortar for
masonry
Building lime
ΕΝ 998-2:2010
External Thermal Insulation
Composite Systems with
Rendering-ETICS
ΕΝ 1806:2006
EN 771-4:2011
EN 771-5:2011
EN 771-6:2011
Product certification body
(System 1)
Decision 97/555/ΕC
ΕΝ 459-1:2010
Decision 97/556/ ΕC
ETAG 004 :2011
* The star mark to harmonized or non harmonized European Standards, Regulations or other Normative documents indicates that
the specific normative document is applied in the degree which is necessary for the conformity assessment of the product against
the essential requirements of the applicable Directive and possibly in conjunction with the harmonized standards, which are
mentioned at the same row.
**Grouping according to ESYD_ KO-PED/01/00/27-1-2011.
Address of the Body: 282, Mesogeion street, 155 62, Cholargos, Greece
Approved Signatories: G. Kechribaris, S. Peltekis, L. Zachos, V. Kazazi, I. Konstantaropoulos,
D. Gournakis, Ch. Dolopoulos
This Scope of Accreditation replaces the previous one dated 11.06.2015.
The Accreditation Certificate No. 31-4, according to ELOT EN ISO/IEC 17065:2012, is valid until 25.09.2017.
Athens, 7.8.2015
George Kallergis
Director of Bodies Accreditation Division
Page 7 of 7
Annex B4/12 according to the Certificate ESYD No. 31-4
7.8.2015