Using your S-TAC1-7X24 ILLUMINATED MIL-HASH RETICLE
One Mil (MRAD) is equal to 10 centimeters at 100 meters. (3.6 Inches @ 100 yards)
Mil based reticles allow you to range targets to determine distance.
To determine the range of your target simply divide the height of the target in Mils divided by the Mils on the reticle x 100 meters.
Example:
Target Height 5 Mils
Target on Reticle= 2 Mils x 100 Meters
=
5 Mils
2 Mils x 100 Meters
=
250 Meters
Resetting your Turrets to Zero
Your new S-TAC Series Scope is equipped with Tactical style Knobs.
To reset your knobs to zero after sight in Simply hold the knob
and remove the #20 Torx screw from the top of the windage or elevation knob by turning Counter Clockwise.
Retighten after setting the knob to the Zero Mark.
Do not over tighten.
Data Valid for S-TAC1-7x24IRMH Only.
All Values in Mils at 100 Meters.
Magnification
Dimension A
Dimension B
Dimension C
Dimension D
Dimension E
Dimension F
Dimension G
Dimension H
Dimension I
Dimension J
Left to Right Windage Bars in MIL
MIL below center line
MIL distance of spacing
Diameter of W/E Centerline in MIL
MIL distance of spacing
Height and width of 5 MIL BARS Windage and Elevation
Height and width of MIL BARS Windage and Elevation
Center Dot Diameter in MIL
MIL distance of spacing
Height and width of 0.5 MIL BARS Windage and Elevation
1
2
3
4
5
6
7
140.000
105.000
17.500
0.875
14.000
14.000
7.000
2.100
3.500
3.500
70.000
52.500
8.750
0.438
7.000
7.000
3.500
1.050
1.750
1.750
46.667
35.000
5.833
0.292
4.667
4.667
2.333
0.700
1.167
1.167
35.000
26.250
4.375
0.219
3.500
3.500
1.750
0.525
0.875
0.875
28.000
21.000
3.500
0.175
2.800
2.800
1.400
0.420
0.700
0.700
17.500
17.500
2.917
0.146
2.333
2.333
1.167
0.350
0.583
0.583
20.000
15.000
2.500
0.125
2.000
2.000
1.000
0.300
0.500
0.500
VER: 2013-3