Section
06
Headwear
& Facial
PROTECTION
Using Shermond’s Headwear and facial protection products, combined with Standard Precautions, you can
protect yourself from potentially harmful pathogens. Shermond’s range of infection prevention products are
designed for optimum protection, patient care and user comfort.
Headwear provides complete containment of hair, preventing the migration of skin scales and hair particles to the
patient and protects the wearer from hidden dangers in theatre.
Protective eyewear is designed for use in situations where potentially infectious fluids may splash or spray into the
eyes or face. All eye protection products are CE approved.
Face masks offer a variety of protection levels from basic protection for circulating staff to disposable respirators for
potentially high infection risks areas. Fluid resistant masks have a finer filter layer with longer wearability and protect
against direct fluid contamination.
Shermond can provide training and fit testing where required.
CONTAINS
NURSES & Theatre caps
Operating caps
Surgeons hood
Mob caps
Uniprotect face masks
Standard face masks
Fluid resistant face masks
RESPIRATORS
Fit test kits
EYE PROTECTION
32
HEADWEAR & FACIAL PROTECTION
NURSES & THEATRE caps
Nurses caps and theatre caps are recommended for medical use to provide protection against the risk of cross infection between
the patient and wearer.
B
Nurses Caps (Elasticated Back)
D
Premier nurses caps are made from soft, lightweight,
breathable, spun-bound, non-woven polypropylene material.
A
Colours available:
C
PREMIER
Healthcare
Excellence
KEY
CODE
Packing
Inner
Outer
A
2915
White
Dispensing Box
100
600
B
2916
Blue
Dispensing Box
100
600
C
2917
Green
Dispensing Box
100
600
D
2918
Pink
Dispensing Box
100
600
G
F
COLOUR
H
I
J
E
A
F
THEATRE Caps (Tie Back)
Premier theatre caps with ties are made from spun-bound, nonwoven polypropylene material. Universal theatre caps with ties
are made from non-woven viscose material. Both materials are
soft, lightweight and breathable. The tie length on all theatre
caps is approximately 5 cm (2”).
THEATRE Caps (Elasticated Back)
PREMIER
Universal theatre caps are made from soft, lightweight,
breathable, non-woven viscose material.
Healthcare
Excellence
KEY
Colours available:
KEY
Colours available:
CODE
COLOUR
Packing
Inner
Outer
G
2901
Green
Dispensing Box
100
600
H
2902
Blue
Dispensing Box
100
600
CODE
COLOUR
Packing
Inner
Outer
UN91220
Blue
Dispensing Box
100
600
CODE
COLOUR
Packing
Inner
Outer
UN91230
Blue
Dispensing Box
100
600
UN91231
Green
Dispensing Box
100
600
E
UN91232
Pink
Dispensing Box
100
600
UN91221
Green
Dispensing Box
100
600
F
UN91233
White
Dispensing Box
100
600
I
UN91223
White
Dispensing Box
100
600
UN91234
Yellow
Dispensing Box
100
600
J
UN91224
Yellow
Dispensing Box
100
600
Email: sales@shermond.coM
KEY
WEB: www.shermond.com
33
OPERATING caps
Operating caps are designed to give more head and hair coverage than theatre caps. They are recommended for medical use to
provide protection against the risk of cross infection between the patient and wearer.
A
C
D
B
D
Operating Caps (Tie Backs)
Premier operating caps with ties are made from spun-bound, non-woven polypropylene material. Universal operating caps with
ties are made from non-woven viscose material. Both materials are soft, lightweight and breathable. The tie length on all operating
caps is approximately 5 cm (2”).
Colours available:
PREMIER
Healthcare
Excellence
KEY
CODE
COLOUR
Packing
Inner
Outer
A
2910
White
Dispensing Box
100
600
B
2911
Blue
Dispensing Box
100
600
C
2912
Green
Dispensing Box
100
600
CODE
COLOUR
Packing
Inner
Outer
UN91250
Blue
Dispensing Box
100
600
UN91251
Green
Dispensing Box
100
600
UN91252
Pink
Dispensing Box
100
600
UN91253
White
Dispensing Box
100
600
KEY
D
Headwear & facial protection
34
Healthcare
Excellence
HEADWEAR & FACIAL PROTECTION
Why choose
Premier Products?
Premier is one of the UK’s leading medical brands and is
the first choice for unbeatable performance and quality.
Why choose Universal Products?
Launched in 1978 Universal focuses on quality, design
and reliability of consumable products for use in operating
theatre environments.
SURGEONS HOOD
Surgeons hoods provide head and neck coverage but leave the face exposed, they are secured with a tie at the back of the
neck. Hoods are recommended for medical use to provide protection against the risk of cross infection between the patient and
healthcare provider.
A
B
B
SURGEONS HOOD
Premier surgeons hoods are made from spun-bound, non-woven polypropylene material. Universal surgeons hoods are made
from non-woven viscose material. Both materials are soft, lightweight and breathable.
PREMIER
Healthcare
Excellence
KEY
A
CODE
COLOUR
Packing
INNER
Outer
2937
Blue
Dispensing Box
100
600
TEL: +44 (0)1530 278111
KEY
B
CODE
COLOUR
Packing
Inner
Outer
UN91240
Blue
Dispensing Box
100
600
FAX: +44 (0)1530 278117
35
MOB CAPS
Mob caps are suitable for medical use for the protection of the patient and wearer from the transfer of infection.
MOB CAPS
A
Bouffant style Premier and Healthgard mob caps are made
from soft, lightweight, breathable, spun-bound, non-woven
polypropylene material.
Colours available:
PREMIER
Healthcare
Excellence
KEY
A
KEY
PLEATED MOB CAPS
CODE
COL
Packing
Inner
Outer
2906
White
Dispensing Box
100
1,000
2907
Green
Dispensing Box
100
1,000
2908
Blue
Dispensing Box
100
1,000
3906
White
Polythene
Dispenser
100
1,000
3908
Blue
Polythene
Dispenser
100
1,000
CODE
COL
packing
inner
OUTER
PSCR03B
Blue
Polythene
Dispenser
100
1,000
PSCR03W
White
Polythene
Dispenser
100
1,000
B
Bouffant style Premier pleated mob caps are made from soft,
lightweight, breathable, spun-bound, non-woven
polypropylene material.
Colours available:
PREMIER
Healthcare
Excellence
KEY
B
CODE
COL
Packing
Inner
Outer
3950
White
Polythene Dispenser
100
1,000
3951
Blue
Polythene Dispenser
100
1,000
3952
Green
Polythene Dispenser
100
1,000
3953
Red
Polythene Dispenser
100
1,000
3954
Yellow
Polythene Dispenser
100
1,000
Headwear & facial protection
36
HEADWEAR & FACIAL PROTECTION
uniprotect™ FACE masks
UniProtect™ standard face masks offer basic protection for medical
staff. They are suitable for general patient care and procedures with no
risk of exposure to blood and/or body fluids.
Optimum width
for best fit facial
protection
Fully enclosed
noseband to
ensure a secure
and comfortable fit.
Ergonomic design
for added comfort
by keeping mask
away from mouth
and to reduce liquid
contamination from
saliva contact.
Lightweight, breathable
material.
All masks are Latex,
Cadmium and Nickel free.
Long length ties or handy
earloops provide a secure fit.
All Universal masks
and respirators
are ultrasonically
bonded for added
strength and to
minimise any
discomfort for the
wearer.
Face masks are regulated under the Medical Devices
Directives 93/42 EEC and are recognised as being dual
purpose: protecting both the healthcare provider and the
patient. All face masks are CE marked as medical devices in
accordance with the Medical Devices Directive 93/42 EEC.
Face masks are not designed to provide respiratory protection.
Please see UniProtect™ respirators.
Why choose Universal Products?
Launched in 1978 Universal focuses on quality, design
and reliability of consumable products for use in operating
theatre environments.
With
Earloops
With
Ties
Email: sales@shermond.coM
Anti-Fog
Option
Available
Visor
Option
Available
WEB: www.shermond.com
37
Standard FACE masks
UniProtect™ masks provide basic protection for medical staff.
They are suitable for general patient care and procedures
where there is no risk of exposure to blood and/or body fluids.
All UniProtect™ face masks are EN14683 Type II compliant.
Standard face masks consistent of three layers;
1
outer protective layer
Coloured to distinguish from fluid resistant face masks
and ensures the user wears the mask the correct way.
2
filter layer
Gives 0.1 micron particle filtration and 3 micron
bacteria filtration efficiency at ≥ 99%
3
inner comfort layer
Enables users to wear the masks comfortably for
an extended period.
UNIPROTECT™ AIR
Cool AIR lightweight materials for maximum
breathing comfort with high level protection
UNIPROTECT™ SURGICAL face masks
Made with a protective three-layer construction, SILK surgical face masks are lightweight and designed to minimise irritation or
discomfort for sensitive skin wearers.
• Complies with EN14683 Type II
• BPF ≥ 99% at 3 microns
• PFE ≥ 99% at 0.1 micron
A
KEY
B
C
D
CODE
DEScription
FIT
colour
Inner
Outer
A
UN41810
Surgical Face Mask
Ties
Blue
50
300
B
UN42815
Procedure Face Mask
Earloops
Blue
50
300
C
UN43900
SILK with DermaCare layer
Ties
White
50
300
D
UN43910
Anti-Fog Surgical Face Mask with Anti-Fog Band
Ties
Blue
50
300
Headwear & facial protection
38
HEADWEAR & FACIAL PROTECTION
Fluid resistant FACE masks
High performance FluidProtect® face masks are fluid resistant to protect from blood borne pathogens. They are recommended for
use where there is risk of fluid contamination during splash or spray prone procedures.
Fluidprotect® masks
All FluidProtect® masks exceed the requirements of EN 14683 Type IIR and provide;
• BPF ≥ 99% at 3 microns
• PFE ≥ 99% at 0.1 micron
Type IIR standards require fluid resistance of 120 mm/Hg (mercury), FluidProtect® masks provide fluid resistance of 160 mm/Hg
(mercury) giving an additional 33% protection from strike-through.
FluidProtect® masks are available with or without a visor for additional protection. The visor has an anti-fog coating and an antiglare band to minimise reflections.
Masks are constructed from
four layers;
1
1
2
3
4
Outer Protective Layer
Brightly coloured to distinguish from
standard face masks and ensures the
user wears the mask the correct way.
3
Filter Layer
Gives 0.1 micron particle filtration and
3 micron bacteria filtration efficiency
at ≥ 99%.
A
B
KEY
2
FluidProtect ®
Membrane Layer
A breathable fluid repellent
membrane that prevents liquid
transmission to the filter layer.
efficiency at ≥ 99%.
4
Inner Comfort Layer
Enables users to wear the masks
comfortably for an extended period.
A soft layer that draws moisture
from exhaled air and enhances
user comfort.
C
D
CODE
DESCRIPTION
FIT
A
UN49245
Surgical Face Mask with FluidProtect Membrane & Anti-Fog Visor
Ties
25
100
B
UN49250
Procedure Face Mask with FluidProtect® Membrane & Anti-Fog Visor
Earloops
25
100
C
UN49205
Surgical Face Mask with FluidProtect® Membrane & Anti-Fog Band
Ties
50
300
D
UN49210
Procedure Face Mask with FluidProtect® Membrane & Anti-Fog Band
Earloops
50
300
®
INNER
Outer
Particle Filtration Efficiency (PFE)
Bacterial Filtration Efficiency (BFE)
Measures the filtration efficiency of a mask against small particles, usually 0.1
μ (micron).
BFE tests determine how much infective agent is retained by the face mask.
This value is directly related to the amount of bacteria released into the air and
retained retained in the mask filter layer. A higher BFE percentage indicates
better protection levels from inffective agents.
The Particle Filtration Efficiency and Bacterial Filtration Efficiency results are averages based upon testing of representative samples selected randomly from production.
TEL: +44 (0)1530 278111
FAX: +44 (0)1530 278117
39
Respirators
A
B
UniProtect™ particulate
respirators are recommended
for use where protection of
the respiratory system is
essential. Respirators are
intended to help reduce
the wearer’s exposure to
potentially infectious airborne
pathogens.
FIT TESTING SERVICE
Fit is very important. Respirators must seal tightly to the face or air
will enter from the sides. The ACoPS (Approved Code of Practice)
supporting the COSHH, CLAW and CAR recommend that tight
fitting respiratory protective equipment (RPE) must be fit tested as
part of the selection process. This is to ensure the selected RPE
has the potential to provide adequate protection for the wearer (L5
paragraph 150, L143 paragraph 196 and L132 paragraph 133). The
ACoPS has legal meaning: if you follow the advice, you will be doing
enough to comply with the law. Shermond can provide a fit testing
service and/or training.
C
+
110
™
UniProtect
particulate
respirators are
recommended
for use where
protection of
the respiratory
system is
essential.
Particulate
filter
respirator
USER GUIDE
111
Selecting the Right Respirator
Fitting your Respirator:
™
feature;
Directions
for Donning
from
UniProtect respirators
help hold the mask away
When using a respirator,
cooler air exchange and
the blue
to create
or whitea nose
chamber
breathing
band side MUST be worn
upward
in order
• A large
to provide the best
ease of speech
facing outward and
andpossible
fit.
the face for wearer comfort
layer that minimises discomfort.
and the soft inner facing
• A natural anti-fog seal
and BS EN 149:2001 compliant.
individually CE marked
01
• All respirators are
02
P2 Respirators;
•
Are recommended by
03
the WHO for SARS and
Avian Flu related outbreaks.
P3 Respirators;
Properly
donning your
respirator may
feel a little
awkward at
first, but it will
become easier
with repeated
applications.
for protection against tuberculosis.
in
specified in the NICE guidance
ns for biological agents
• Meet the requirements
Avian Flu and HSE recommendatio
with HPA guidance on
• Comply
Separate
the mask to open
Do not proceed
Gently pre-bend the
healthcare laboratories.
smoke or laser plume.
fully.
found in surgicalHold
the mask upside down
out particulates
nosepiece
to filter
to conform the
with your
• Are suitable for use
to expose the two headbands.
mask to your face.
breathing
activities
up of heat which makes
help to reduce the build
environments or
Respirators
Valved
P3
or when used in warm
time
of
until you have
04 In addition,
worn for longer periods
easier. This is useful when 05
checked your
06
those with elevated humidity.
with 0.6
respirators
the
respirator fit is
involves challenging
P2 or P3).
regime for respirators
The EN149: 2001 testing chloride to determine their classification (FFP1,
successful.
micron particles of sodium
chloride
the % of sodium
The testing measures
of air compared to that
exceeding 98% are FFP3.
Respirators with PFEs
significantly higher volumes
the respirator and uses
particulates filtered by
used for face mask testing.
Separate the headbands
using your index and
middle fingers.
Tip your head slightly
forward
and place the base of
the
mask firmly under your
chin.
important. Respirators
07
Fit is very
face or air
must seal tightly to the
08
will enter from the sides.
Position the mask on your
face and bring the headbands
over your head.
Code of Practice)
The ACoPS (Approved
CLAW and CAR
supporting the COSHH,
fitting respiratory
recommend that tight
must be fit tested
protective equipment (RPE)
process. This is to
as part of the selection
has the potential to
ensure the selected RPE
for the wearer
provide adequate protection
196 and
paragraph 150, L143 paragraphhas legal
(L5
Place the first
headband
The ACoPS
at 133).Form
the nose
paragraph
L132neck
the nape of your
piece
tightly
will be
you
and
the advice,
the
follow
you
across
if
the bridge
meaning:
remaining headband
the law. of your
at the to comply
nosewith
enough
and face. Adjust the
crown of yourdoing
head.
mask to achieve
a good
testing service
fit
a
facial seal.
Shermond can provide
and/or training.
Fit check your respirator
every time you wear
SEE
PAGES
110111
it.
Forcefully inhale and exhale
several times. The respirator
you inhale and expand
should collapse slightly
when you exhale. You
when
should not feel any air
face and the respirator.
leaking
If the respirator does not
out between your face
collapse and expand OR between your
and the respirator, then
if air is leaking
you
Adjust your respirator
until the leakage is corrected have NOT achieved a good facial fit.
respirator.
and you are able to successfully
fit your
Important: If after trying
these tips you are still
unable to successfully
respirator, please contact
fit check your
us.
S ArE ONLY A GUIDE.
INfOrMATION.
THE ABOvE SEQUENCE HOSPITAL POLICIES fOr fUrTHEr
rEfEr TO YOUr LOCAL
THE ABOvE SEQUENCE
rEfEr TO YOUr LOCAL
S ArE ONLY A GUIDE.
HOSPITAL POLICIES
fOr fUrTHEr INfOrMATI
ON.
UNIPROTECT™ Respirators
KEY
Or fITTING
IrAT
rESP
rESP
IrATOr fITTING
USER GUIDE
FILTER RESPIRATORS
PARTICULATEPARTICU
LATE FILTER RESPIRA
TORS USER GUIDE
CODE
Description
COLOUR
Inner
Outer
A
UN42450
P2 Respirator with Elasticated Headbands
White
20
240
B
UN42460
P3 Respirator Unvalved with Elasticated Headbands
White
20
240
C
UN42470
Valved P3 Respirator with Elasticated Headbands
White
20
240
D
FIT TEST KITS
Fit testing ensures respirators fit each individual wearer. The
test requires the subject to wear a respirator and another
person to administer the test. The Bitrex fit test is a qualitative
test; a pass or fail that relies on the subject’s response to the
test agent (commonly Isoamyl Acetate, Saachrin or Bitrex).
FIT TEST KITS
Bitrex has a bitter taste that indicates a breakthrough in the respirator fit. These Bitrex fit test kits include everything needed to fit
test respirators. Each kit contains:
•
•
•
•
1 x fit test hood
1 x Nebulizer #1 for threshold screening
1 x Nebulizer #2 for fit testing
Bitrex threshold screening solution (6 x 2.5 ml ampules)
•
•
•
•
Bitrex fit test solution (6 x 2.5 ml ampules)
1 x Qualitative fit test instructions
10 x Wallet respirator ID cards
10 x Respirator training certificates
Users should get approximately 3 – 5 fit tests per applicator tube (fit test cycle) or 18 – 30 per supply of Bitrex solution in this kit.
KEY
D
CODE
DESCRIPTION
OUTER
UNHM10301
Moldex Test Kit
1 Kit
UNHM050301
Bitrex Fit Test Solution (50 ml)
10 x 50 ml
Headwear & facial protection
40
HEADWEAR & FACIAL PROTECTION
EYE PROTECTION
A
B
Eyeprotect™ FULL Face visors
EYEPROTECT™ assembled GLASSES
Full face visors provide high level protection from body fluid
or blood splashes or spray. A wide thick foam band across
the forehead, and a wide latex free head band, ensures a
comfortable and secure front seal for wearers. The optically
correct anti-fog visor, gives wearers maximum and accurate
visibility. In addition, prescription or protective eye wear can be
worn underneath the visor.
EyeProtect™ Glasses are comfortable and lightweight, with
excellent optically correct lenses. They can be worn over most
prescription glasses.
KEY
A
To minimise costs and reduce waste, the frames can be
disinfected using a hard surface disinfectant wipe, and
replacement lenses easily fitted.
KEY
CODE
DESCRIPTION
INNER
Outer
B
UN50
Glasses (Assembled)
50
200
CODE
SIZE
Outer
UN250L
Replacement Lenses
25
250
UN43150
Standard
40
UN100F
Replacement Frames
10
100
Astrospecs
C
With single polycarbonate lenses and integral brow guard.
They offer highest optical quality lenses – class 1 and maximum
UV protection. They are CE approved to EN166 1F.
KEY
C
Email: sales@shermond.coM
CODE
SIZE
Outer
UN9168666
One Size
5
WEB: www.shermond.com