ETC
Unison® 100-120V Rack Enclosure
Unison DRd Series
O r d e r i n g i n f o r m at i o n
100-120V - DRd Rack Enclosures
Model
Description
DRd6-12-120
6 module rack enclosure (12 circuits)
DRd12-24-120
12 module rack enclosure (24 circuits)
DRd12-48-120*
(2) 12 module rack enclosures (48 circuits)
*In 48 channel configurations, (2) 12 module racks are cross-bussed using AX series
main lug or main breaker enclosures.
G e n e r a l I n f o r m at i o n
100-120V - Auxiliary Enclosures
ETC’s Unison DRd Series Rack Enclosures are the workhorses behind
the scenes, supporting two processor options and a variety of
dimming, switching and option modules. DRd Rack Enclosures are
trusted for their reliability and versatility
Applications
• Churches
• Hotels
• Convention Centers
• Theatres
• Schools
• Restaurants
Features
• All-On – clearly marked switch allows for all loads to be
turned on to full, without the need for a control processor
• HighFault – protection from power spikes and surges with
short circuit current ratings from 22,000 amps, up to 100,000
amps
• Regulation – monitoring and adjustment of incoming line
voltage with min and max scale voltages
• Bypass – UL924-listed emergency lighting bypass input with
load shedding
• Hold Last Look – dimming engine holds the last output during
any loss of control
• QuickBoot – dimming engine boot time of less than
4 seconds
• PowerStrip – solid copper bus that easily converts form
1-phase to 3-phase without additional parts
• HiRes Dimming – support for 16 bit DMX and over 65,000
steps of dimming
• Electronic Low Voltage Dimming – reverse phase dimming
control when used with the ELV module
Model
Description
AX6-MCB-1-150
Auxiliary rack with 150A Main Breaker for
DRd6 -1ø, 3W
AX6-MCB-3-100
Auxiliary Rack with 100A Main Breaker for
DRd6 - 3ø, 4W
AX12-MCB-1-300
Auxiliary Rack with 300A Main Breaker for
DRd12 - 1ø, 4W
AX12-MCB-3-200
Auxiliary Rack with 200A Main Breaker for
DRd12 - 3ø, 4W
AX12-ML-3-200
Auxiliary Rack with Main Lugs for DRd12 3ø, 4W
AX12X-MCB-1-400
Auxiliary Rack with 400A Main Breaker for
(2) DRd12 - 1ø, 3W
AX12X-MCB-3-400
Auxiliary Rack with 400A Main Breaker for
(2) DR12 - 3ø, 4W
AX12X-ML-1-600
Auxiliary Rack with Main Lugs for (2) DR12
- 1ø, 3W
AX12X-ML-3-400
Auxiliary Rack with Main Lugs for (2) DR12
- 3ø, 4W
DRd Options and Accessories
1 of 4
Model
Description
DRd-FLO
DRd 4-wire Fluorescent Option
DRd-DALI
DRd DALI Option
DRd-PED
DRd Floor Mount Pedestal
ETC
Unison® 100-120V Rack Enclosure
Unison DRd Series
sp e ci f ic a t i o n s
Acc e ss o r i e s a n d Op t i o n s
General
• DRd rack enclosures available in two sizes. DRd6 with support
for 6 modules and up to 12 circuits and DRd12 with up to 12
modules and 24 circuits.
• Full 8 year Warranty
Mechanical
• Welded 18-gauge formed steel construction
• Surface or floor stand mount
• Hinged, lockable full-height door with electrostatic air filter
• Fine-textured, scratch resistant, epoxy paint
• Integral low voltage fan
• Modular control electronics
Electrical
• 100-120 Volt, 3 phase systems –
-- Field configurable for single-phase operation with no
additional parts
-- Available in 230 Volt CE, and 240 or 277 Volt
UL configurations
• Voltage tolerance ± 10%
• Operating frequency: 50-60Hz.
• DRd6/ DRd12 Rack Enclosure fault current protection:
-- 22,000A Short Circuit Current Rating (SCCR)
-- 100,000A SCCR when installed using AX Auxiliary Rack
with Main Breaker
• Main lugs accept maximum 350 MCM wire
• Load terminals accept maximum #6 AWG wire
• AX Racks equipped with breakers sized for maximum
load capacity
-- Lower rated trip plug options available
• UL and cUL Listed
Functional
• High density dimming for incandescent, fluorescent,
neon, cold cathode, electronic and magnetic low voltage
transformer, load types
• Ability to cross bus and control two rack enclosures using
one control processor
• Supports ETC Dimmer Doubling
• 16 bit DMX input
• Designed for reliable continuous operation
Thermal
• Ambient room temperature: 0-40°C / 32-104°F
• Ambient humidity: 10-90% non-condensing
Control Processors
• SmartLink® Architectural Control Processor (S-ACP)
• Paradigm™ Architectural Control Processor (P-ACP)
Station power Options
• SmartLink Station Power Module (S-SPM)
-- Provides Echelon® LinkPower for up to 16
SmartLink stations
-- Allows for up to 1640 feet (500 meters) of
station bus wiring
• Paradigm Station Power Module (P-SPM)
-- Provides Echelon LinkPower for up to 32 Unison stations
-- Provides 24V auxiliary power for interface and
touchscreen stations
-- Allows for up to 1640 feet (500 meters) of station
bus wiring
uNISON MODULES
Model
Description
D15
Dual 1.8KW (120V) Dimmer Module
D15E
Dual 1.8KW (120V) High Rise-time Dimmer Module
D15F
Single 1.8KW (120V) 3-wire Dimmer Module
R15
Dual 1.8KW (120V) Relay Module
CC15
Dual 1.8KW (120V) Constant Current Module
D20
Dual 2.4KW (120V) Dimmer Module
D20E
Dual 2.4KW (120V) High Rise-time Dimmer Module
D20F
Single 2.4KW (120V) 3-wire Dimmer Module
R20
Dual 2.4KW (120V) Relay Module
CC20
Dual 2.4KW (120V) Constant Current Module
ELV10
Dual 1.2KW (120V) Electronic Low-Voltage Module
Accessories
• Unison RideThru Option (URTO)
-- Short term power back-up of control electronics
for at least 10 seconds
-- Automatically engages when power is lost
-- Recharges during normal power operation
• Unison Battery Pack Option (UBPO)
-- Long term power back-up of control electronics
for at least 90 minutes
-- Automatically engages when power is lost
-- Recharges during normal power operation
• 4-wire Fluorescent option (DRd-FLO)*
-- 4-wire (0-10 Volt sink) ballast control
-- Up to 24 outputs
-- Up to 50 ballasts per output
• DALI Ballast option (DRd-DALI)*
-- Support for 24 loops of DALI control in broadcast mode
-- Up to 63 ballasts per output
-- External DALI power supply required (by others)
• Unison DRd Pedestal (DRd-PED)
-- Floor-mount pedestal for Unison DRd dimming enclosures
*Option module required, either (1) DRd-DALI or (1) DRd-FLO may be used
in each DRd enclosure
2 of 4
ETC
Unison® 100-120V Rack Enclosure
Unison DRd Series
t y pic a l s y s t e m r is e r – sMARTL I N K C ONTROL
To load circuits
SmartLink
Timeclock
S-ATC
To load circuits
Unison
DRd12
Unison
DRd12
LinkConnect
Belden 8471+(1) #14
LinkConnect
Belden 8471+(1) #14
SmartLink
button stations
S10005 and S10010
LinkConnect
Belden 8471+(1) #14
DMX
Belden 9729
Link
Power
Link
Power
Fault+
Fault+
Fault-
Fault-
1
Power
DMX IN
Error
DMX
Belden 9729
4
2
5
3
1
Power
6
7
8
9
recent
and
0 help
# nav
thru
4
DMX IN
Error
2
5
3
6
7
8
9
recent
and
0 help
# nav
thru
Optional DMX input
Main input
Main input
t y pic a l s y s t e m r is e r – P a r a dig m C ONTROL
To 3rd party
serial device
LinkConnect
Belden 8471+(1) #14
Serial RS232
Belden 9729
Paradigm Touchscreen
P-LCD
ETC Net3
Belden 1583A
PC for LightDesigner
and other ETC software
Paradigm Touchscreen
P-LCD
AuxPower
(2) #16 AWG
LinkConnect
Belden 8471+(1) #14
DMX
Belden 9729
Heritage Control Stations
ETC Net3
Belden 1583A
Aux
Power
Link
Power
Fault+
Fault-
1
Power
DMX A
DMX B
Ethernet
Error
2 abc
3 def
4 ghi
5 jkl
6 mno
7pqrs
8 tuv
9 wxyz
recent
and
0 help
# nav
thru
Unison
DR12
ETC Net3
Belden 1583A
PoE Switch
Remote Video Interface
Net3 RVI
ETC Net3
Belden 1583A
ETC Net3
Belden 1583A
Net3 Gateway
N34G
DMX
Belden 9729
To DMX
devices
ETC Net3
Belden 1583A
SmartSwitch
SS24
ETC Net3
Belden 1583A
Control Console
ION
Sensor+
SR48+
3 of 4
ETC
Unison® 100-120V Rack Enclosure
Unison DRd Series
physical
Clearence
above fan
DRd12
AX Rack*
12.0”
304.8 mm
DRd12
Clearence
above fan
AX Rack*
12.0”
304.8 mm
DRd6
31.0”
787.4 mm
21.9”
556.3 mm
Aux
Power
Aux
Power
Aux
Power
Link
Power
Link
Power
Link
Power
Fault+
Fault+
Fault-
Fault-
2 abc
1
Power
DMX A
DMX B
Ethernet
Error
Fault-
Power
5 jkl
6 mno
DMX A
7pqrs
8 tuv
9 wxyz
Ethernet
recent
and
0
# nav
thru
help
Fault+
1
3 def
4 ghi
DMX B
Error
2 abc
3 def
1
Power
4 ghi
5 jkl
6 mno
DMX A
7pqrs
8 tuv
9 wxyz
Ethernet
recent
and
0 help
# nav
thru
DMX B
Error
2 abc
3 def
4 ghi
5 jkl
6 mno
7pqrs
8 tuv
9 wxyz
recent
and
0 help
# nav
thru
9.6”
243.8 mm
13.0”
330.2 mm
9.6”
243.8 mm
17.0”
431.8 mm
17.0”
431.8 mm
30.0”
762 mm
13.0”
330.2 mm
17.0”
431.8 mm
47.0”
1193.8 mm
*Optional AX Shown
Product Weights*
Product Dimensions*
Model
Height
inches
mm
Width
inches
mm
model
Depth
inches
mm
weight
shipping weight
lbs
kgs
lbs
kgs
DRd6-12-120
21.9
557
17.0
432
9.60
244
DRd6-12-120
38
17.15
42
19.05
DRd12-24-120
31.0
787
17.0
432
9.60
244
DRd12-24-120
51
23.13
55
24.95
AX6
21.9
557
13.0
330
8.0
203
AX6-ML
23
10.43
28
12.70
AX12
31.0
787
13.0
330
8.0
203
AX6-MCB
28
12.52
35
15.87
AX12X
31.0
787
13.0
330
8.0
203
AX12-ML
28
12.70
35
15.88
AX12-MCB
33
14.97
40
18.14
AX12X-ML
33
14.97
40
18.14
AX12X-MCB
35
15.88
42
19.05
*Weights and dimensions typical
Corporate Headquarters • 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979 USA • Tel +1 608 831 4116 • Fax +1 608 836 1736
London, UK • Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK • Tel +44 (0)20 8896 1000 • Fax +44 (0)20 8896 2000
Rome, IT • Via Ennio Quirino Visconti, 11, 00193 Rome, Italy • Tel +39 (06) 32 111 683 • Fax +44 (0) 20 8752 8486
Holzkirchen, DE • Ohmstrasse 3, 83607 Holzkirchen, Germany • Tel +49 (80 24) 47 00-0 • Fax +49 (80 24) 47 00-3 00
Hong Kong • Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong • Tel +852 2799 1220 • Fax +852 2799 9325
Web • www.etcconnect.com • Copyright©2008 ETC. All Rights Reserved. All product information and specifications subject to change. PRELIMINARY Printed in USA 05/08
Unison® products protected by one or more of the following U.S. Patenten Numbers 5,323,088, 5,352,958 and 6,849,943; European Pateten Number 0603333; German Patent Number 69203609; US and International patents pending
4 of 4