Program
Lighting controls
Indoor area
Outdoor area
2008/09 edition
Efficient visual comfort
Light interprets space and turns
architecture into an experience.
“tune the light” means being able
to adjust architectural lighting
at any time using precision lighting tools and networked control
systems to attain optimum lighting quality and conservation of
resources.
Contents
Introduction
7 ERCO Innovations
43 Lighting Vertical Surfaces
Lighting controls
Lighting control systems
Index page 50
Light System
DALI
51
LON Area Net
61
Indoor
Introduction
74 Light in the indoor area
Track and light structures
Index page 76
ERCO track
77
Hi-trac track
and light structure
95
T16 light structure
103
Monopoll track
and light structure
111
Note:
Available in varychrome
technology
www.erco.com
ERCO Program 2008/09
1
Indoor
Contents
Spotlights, floodlights and
wallwashers
for track
Index page 122
Cantax
Emanon
128
147
Quinta
212
Jilly
224
Optec
Stella
281
Parscan
180
Eclipse
194
TM Spotlights
200
Domotec
208
Pollux
234
Castor
242
Oseris
248
Gimbal
253
256
Recessed spotlights
Index page 296
Compar
297
2
ERCO Program 2008/09
Gimbal
305
Quadra
312
www.erco.com
Contents
Indoor
Lightcast recessed luminaires
Index page 320
PAR lamps:
358 Downlights
359 Lens wallwashers
361 Directional luminaires
Low-voltage halogen lamps:
330 Double-focus downlights
331 Downlights
335 Washlights
337 Double washlights
338 Double-focus wallwashers
339 Lens wallwashers
340 Directional luminaires
Tungsten halogen lamps:
347 Double-focus downlights
348 Downlights
352 Washlights
353 Double-focus wallwashers
354 Lens wallwashers
High-pressure discharge lamps:
365 Double-focus downlights
367 Downlights
374 Washlights
377 Double-focus wallwashers
377 Lens wallwashers
380 Wallwashers
380 Directional luminaires
Compact fluorescent lamps:
391 Downlights
399 Washlights
403 Wallwashers
Compact HIT
410
Starpoint
431
Compact 100
440
Lightscan
481
TFL Wallwasher
Recessed luminaires
Index page 408
Skim
CL downlights
447
CLC downlights
453
416
Panarc
460
Quadra
466
487
Surface-mounted luminaires
Index page 494
Starpoint
495
www.erco.com
Cylinder
500
Panarc
505
TFL Wallwasher
510
Note:
Available in varychrome
technology
ERCO Program 2008/09
3
Indoor
Contents
Pendant luminaires
Index page 514
Parabelle
515
Starpoint
522
Cylinder
525
Atrium
Floor washlights
551
Task lights
Index page 529
Lucy
530
Wall-mounted luminaires
Index page 535
Trion
536
545
Recessed floor luminaires
Index page 557
Nadir IP67
558
Outdoor
Introduction
571 Light in the outdoor area
Projectors and floodlights
Index page 573
Grasshopper
574
4
ERCO Program 2008/09
Beamer
580
Focalflood
594
Parscoop
614
Note:
Available in
multichrome technology
Available in varychrome
technology
www.erco.com
Contents
Outdoor
Open area and facade
luminaires
Index page 636
Kubus
638
Axis Walklight
Visor
650
Midipoll
659
Focalflood
Facade
luminaires
Site
703
Panorama
666
Lightmark
674
645
Lightmark
Facade
luminaires
689
Cylinder Facade
luminaires
694
699
Lightcast recessed luminaires
Index page 709
Low-voltage halogen lamps:
712 Downlights
713 Directional luminaires
PAR lamps:
714 Downlights
714 Directional luminaires
High-pressure discharge lamps:
715 Downlights
716 Directional luminaires
Compact fluorescent lamps:
717 Downlights
Ceiling-mounted luminaires
Index page 718
Paratec
719
Cylinder
726
Tesis IP68
LED orientation
luminaires IP68
In-ground luminaires
Index page 733
734
Note:
Available in varychrome
technology
756
www.erco.com
ERCO Program 2008/09
5
Contents
Outdoor
Appendix
767
778
789
792
795
6
ERCO Program 2008/09
Lamp index
Photometric data from ERCO
General Information
Article number index
ERCO Addresses
www.erco.com
ERCO Innovations 2008/09
The essence of innovations is
more than a collection of crea tive ideas, inventions or research
results. It is the implementation
of these to bring about a change
for the better, to benefit the
people who will use them. The
new ERCO Program includes a
phenomenal 800 new products.
Some are additions to, and
updates of, existing ranges, but
predominantly, it includes several
completely new product ranges.
New developments provide the
opportunity to link state-of-theart technology with the results
of ERCO’s own research and
develop ment to produce designs
which are as innovative as the
technologies used in these products. The following pages introduce our key innovations that
have resulted in new ERCO lighting equipment, and explain the
concepts behind the new prod uct ranges. The aim is to enable
every lighting user to exploit
the advantages and possibilities
afforded by these developments
straight away.
Spherolit reflectors
The new reflector technology produces perfect light quality and a
wealth of advantages in practical
applications.
8
Kubus
Kubus is a range of highly inte grated,
miniaturised light sources for outdoor use – for use with HIT lamps or
maintenance-free LED technology.
27
Emanon
From the stage to the shop window:
the Emanon range of spotlights
designed by Yves Béhar – for effective presentation lighting, sales
areas or trade fair stands.
13
Midipoll
This new range of bollard luminaires
for either HIT lamps or LED technology provides glare-free light and
transforms the bollard into a spacedividing element.
30
Cantax
This spotlight range designed by
Naoto Fukasawa is characterised by
clear shapes and state-of-the-art
technologies.
17
Lightmark
The Lightmark range of bollard
lumi naires and facade luminaires
has been extended with versions
for recessed wall installation.
33
Light System DALI
This lighting control system and
its integral Light Studio software
are continuously updated with new
functions.
20
Floor washlights
The redevelopment of the range of
floor washlights has concen trated
on modern lamps such as LEDs
and on maintaining the attractive
appearance.
35
Wallwashing out of the ground
New lighting equipment for recessed
floor mounting provides differentiated vertical illumination to suit
every situation – both indoors and
outdoors.
22
Compact HIT
With Spherolit technology and
highly efficient metal halide lamps,
the Compact HIT represents a new
approach to the concept and appearance of downlights.
37
Tesis
The square recessed Tesis floor
luminaires add a further design to
the range and include new types
of wallwasher.
23
Compar
This new range of recessed spotlights
is intended primarily for the retail
sector and is intriguing through the
variety of lighting innovations.
39
Nadir
The Nadir range of recessed floor
luminaires has been entirely redeveloped and given a new look with various trim detail in round or square.
25
Focus: efficient visual comfort;
vertical illumination
Lighting technology, lighting design
and light management provide significant potential for energy savings
and the conservation of resources.
42
www.erco.com
ERCO Program 2008/09
7
Spherolit reflectors: a new technology
The innovative and exclusive
technology which ERCO introduced in Spherolit reflectors
presents a virtually ideal light
quality. The reflectors offer many
practical advantages to lighting
designers and users. After introducing Spherolit reflectors some
two years ago in individual ERCO
products, they can now be found
in a comprehensive range of new
and existing products. So, ERCO
has reinvented a seemingly trivial
element of lighting technology.
The Spherolit technology is
based on the division of the reflector into individual areas, similar to
conventional facetted reflectors.
However, these individual areas –
we call them spherolites – have a
three-dimensional, spherical curvature. Due to the individual shaping of the spherolites, the reflector
characteristic can be controlled
over a wide range. The result is
spotlight reflectors that have the
same basic geometry, i.e. diameter, depth and focal point, but different light distribution patterns,
from narrow spot to wide flood.
All these characteristics share one
common factor – producing a light
quality of the highest standard.
The beams are exceptionally uniform, without striations and have
a neat, slightly soft edge – and
that in connection with a suitably
high light output ratio.
Spherolit reflectors are pressformed of aluminium and mirrorfinish anodised. The manufacturing process from the complex
calculation and computer simulation to the manufacture of precision tools and the production
occurs within ERCO, which confirms our claim to leadership in
reflector technology.
ERCO Spherolit
reflectors are
easily recognised
by the bright,
attractive appearance of the individual convex
spherolites.
8
Not until the
availability of
effective computer simulations
has it become
possible to calculate the complex shapes of
Spherolit reflectors efficiently.
ERCO Program 2008/09
“tune the light”:
changing reflectors without
using tools allows
spotlights with
Spherolit technology to be
quickly and flexibly adapted to
new lighting
concepts.
www.erco.com
Spherolit reflectors: spotlight characteristics
Narrow spot
To accentuate
smaller objects
with high luminance or to cover
considerable dis-
tances between
luminaire and
object. Beam
angle < 10°.
Spot
The standard
characteristic to
accentuate all
kinds of objects,
specifically to
model the threedimensional
shape. Beam
angle 10°-20°.
Flood
For efficient
accent light on
larger objects or
for wider spread
lighting of areas
of rooms. Beam
angle 25°-30°.
Wide flood
To provide flexible floodlighting of surfaces
and room areas,
specifically for
the presentation of merchandise. Beam angle
> 45°.
The reflectors of
spotlights with
Spherolit technology can be
exchanged without tools in next
to no time. The
reflectors are
available in different characteristics. Each reflector is supplied
with 3 retaining
springs and the
safety glass.
www.erco.com
ERCO Program 2008/09
9
Spherolit reflectors: wallwashing
Spherolit
wallwasher
In terms of its
basic dimensions,
the innovative
Spherolit reflector, wallwash,
does not differ
from other spotlight reflectors.
A Softec lens
replaces the clear
safety glass.
ible as a segment
The specially
shaped spherolites in the reflector
used for wallwash- surface.
ing are clearly vis-
10
Providing four different spotlight
characteristics for one and the
same basic reflector shape does
not, by any means, exhaust the
Spherolit principle. After extensive experiments with virtual and
real reflector prototypes, ERCO
has now produced an asymmetrical light distribution which
resulted exclusively from the
three-dimensional shaping of
separate areas of the reflector.
Now several spotlight ranges
include Spherolit wallwashers,
which are specifically designed
for applications such as sales
areas or for presentation, where
they are an interesting alternative to the classic lens wallwasher
technology.
In terms of its basic shape,
dimensions and focal point, the
Spherolit reflector, wallwash, is
no different from spotlight reflectors, i.e. it can also be replaced by
other versions without tools. The
reflector surface, however, stands
out clearly due to its specially
shaped spherolites, and a Softec
lens replaces the usually clear
safety glass. The light distribu tion of the Spherolit wallwasher
is designed so that a focal emphasis is placed on the upper third of
the wall, while providing general
illumination of high uniformity.
The new wallwasher technology
has also resulted in raising light
levels over the illuminated area.
ERCO Program 2008/09
For certain applications, however,
the classic lens wallwasher technology proves more suitable due
to its perfect uniformity across
the entire wall – relevant for museums or particular representative
areas in architecture. The wallwasher attachment also provides
improved shielding against glare.
Consequently, both wallwasher
technologies are now a component part of ERCO’s extensive
range of lighting equipment for
vertical illumination.
Lens wallwasher
The scoop-shaped
wallwasher attachment is a characteristic feature of
the classic lens
wallwasher technology.
www.erco.com
Spherolit reflectors: technical background
Using complex calculations and
computer simulations ERCO’s
design engineers created the
arrangement and shape of the
spherolites so they achieve the
intended light distribution pattern. Because the beam of the
spotlight is actually made up of
a multitude of separate beams
from the individual sub areas, it
is possible to produce excellent
uniformity and the defined, yet
soft edge of the beam without
reducing the brightness of the
light. Compared with other methods used to affect the spotlight
characteristic, such as Vario reflector technology, attachments or
spread lenses, the Spherolit reflectors can be replaced without tools
and result in an optimum light
output ratio.
Based on decades
of experience in
reflector production, ERCO can
now fully implement this precision in its production processes.
The development
and production of
Spherolit reflectors requires special know-how,
especially in the
area of computer
calculation and
simulation. The
complex tool
shapes can only
be realised by
The optical principle of the
Spherolit reflector: Depending
on the convex shape used in each
individual sub area, the incident
light reflected off them is spread
accurately. Consequently, the
Spherolit reflector, narrow spot,
has the flattest spherolites, while
the convex shape of the Spherolit
reflector, wide flood, is most pronounced.
using highly
developed CAD/
CAM systems –
with tolerances
in the range of
1/1000mm.
Section of a
Spherolit reflector, narrow spot.
Section of a
Spherolit reflector, wide flood.
www.erco.com
ERCO Program 2008/09
11
Spherolit reflectors: product overview
The following
product ranges
are all provided
with reflectors
in Spherolit
technology:
Cantax
Emanon
Compar
Compact HIT
Parscan
TM spotlight
Quinta
Jilly
Gimbal recessed
spotlights
Lightcast directional luminaires
for low-voltage
halogen lamps
Lightcast directional luminaires
for high-pressure
discharge lamps
Grasshopper
In the following ranges, the
Spherolit technology is used
in individual
articles:
12
ERCO Program 2008/09
Castor
Gimbal
Optec
www.erco.com
Emanon
Many methods and effects that
are used in stage lighting and
then applied to shops and shop
windows, presentations or trade
fair stands eventually now find
their way into architecture. The
time was right to develop a new
range of spotlights from scratch
for this area of application – a
system which would consolidate
the progress of lighting technology over the past few years and
which creative designers could
use effortlessly to implement
the principle of “tune the light“.
Lighting equipment which would
enable the creation of scenographic effects – a familiar aspect
in stage shows and at events
– even for continuous, day-byday operation. This new range of
spotlights – Emanon - consists
of a striking, integrative housing
design for highly differentiated
lighting equipment: from standards including spotlights for lowvoltage halogen or HIT lamps to
ERCO specialities such as LED varychrome spotlights or technical
innovations such as the DALIcontrolled Goborotator.
The innovations incorporated
in the Emanon range include the
Spherolit reflectors, which are
available with four spotlight beam
angles, from narrow spot to wide
flood, and wallwasher. In addition to a superior quality of light,
they provide the option of replacing the exchangeable reflectors
in next to no time to change the
www.erco.com
light distribution. For vertical illumination, the range alternatively
provides classic lens wallwashers.
In terms of heat management, this
range also follows a new path: the
thermally stressed components
such as lamp, lampholder and
reflector are installed in a cylindrical metal carrier with controlled
ventilation which is situated
between the high-quality plastic
shells of the spotlight housing.
The flat part of the housing provides a thermally separated space
for the electronic or DALI-compatible control gear. Its dimpled
surface identifies a gripping zone
to adjust the luminaires during
operation.
In a class of their own are the
projection spotlights, specifically
those with digitally controlled
Goborotator. There are two types
of optical projection system, differentiated by their light distribution patterns. Both types of system
are also available as Goborotator,
which projects two independently
rotating gobos to produce fascinating, dynamic lighting effects.
Emanon design
Designer Yves Béhar says of the
concept devised by fuseproject
for the Emanon range of spotlights:
The housing itself is a handle
with highly tactile recesses. The
spotlight can be adjusted to
illuminate the required scenery.
Emanon challenges the user’s
creativity, encourages spontaneous and insouciant handling
– a fundamentally different
user experience from previous
spotlight luminaires.”
“Our aim for Emanon was to
come up with a design that
would combine visual clarity
with new forms of expression:
the lighting technology and the
volume of the control gear join www.fuseproject.com
to produce a flowing shape by
arranging them next to each
other and uniting them through
a band-like surface. The band
appears like a mantle and has
strong, yet unobtrusive symbolism: the luminaire naturally
merging with the ceiling and its
surroundings. The lightweight,
slimline track fixture penetrates
this mantle like a pendulum at
the luminaire’s centre of gravity without compromising the
flowing shape.
Emanon demonstrates the
intelligence which characterises it by subtle design details
which, rather than intimidate
the user, encourage creativity.
At once sensual and metaphorical, Emanon prompts you to
touch and align it: the spotlight
has a similar feel to that of a
camera and allows the user to
manage light intuitively.
ERCO Program 2008/09
13
Emanon: system design
Designer Yves
Béhar used a
structured surface
to indicate the
handling zones on
the spotlight. The
heat generated by
the lamp is dissipated through the
ventilation grille
on the back.
Unmistakably, the different
Emanon lighting tools form a
system with common design
features. This makes it possible
in an architectural situation to
produce differentiated scenographic lighting concepts with a
uniform appearance of the luminaires. The spotlights use the
whole spectrum of ERCO spotlight accessories, such as colour
and conversion filters or antidazzle rings.
Emanon lens
wallwasher
Emanon
spotlight
Spherolit reflectors
The Emanon spotlights all make
use of the advantages of the innovative Spherolit reflectors: a superior quality of light and flexibility through the option to exchange
the reflectors quickly. The reflectors can be replaced without tools
and are available with four spotlight beam angles and as Spherolit
reflector, wallwash.
14
Narrow spot
Rotationally
symmetrical light
distribution,
beam angle < 10°
ERCO Program 2008/09
Spot
Rotationally symmetrical light distribution, beam
angle 10°-20°
Flood
Rotationally symmetrical light distribution, beam
angle 25°-35°
Emanon projection spotlight
medium beam,
soft-edged
Emanon
projection
spotlight with
Goborotator
medium beam,
soft-edged
narrow beam,
sharp-edged
narrow beam,
sharp-edged
Wide flood
Rotationally symmetrical light distribution, beam
angle > 45°
Wallwash
Asymmetrical
wallwasher light
distribution
www.erco.com
Emanon Goborotator
In the Emanon range, the projection
spotlights with Goborotator are an
innovative highlight. Through the
use of independently controllable rotating gobos, the projection
effects created can be fascinating.
The character of these projections
can range from slow moving, subtly atmospheric effects to stimulating, highly dynamic focal points.
The Goborotator can be used with
two metal or glass gobos, but also
with colour filters or structured
glasses – thus, there is now virtually no limit to the imagination.
The direction and speed of rotation are controlled using either
the rotary switch directly on the
spotlight or via the ERCO Light
System DALI and its integrated
Light Studio software, which provides a convenient tool for the
operation of the Goborotator.
Low-noise toothed belt drives,
elastic motor bearings, long-life
lamps, and a fanless, thermally
efficient design ensure reliable
continuous operation in architecture.
ERCO offers
a selec tion of
gobos and structured glasses with
abstract structures as accessories. Since the
gobos have standard dimensions,
a wide variety of
suitable gobos
are also available
from other accessory suppliers.
ERCO Program 2008/09
15
The Light Studio
software provides
a tool that allows
the control of all
Goborotator functions via Light
System DALI.
www.erco.com
Product overview Emanon
Spotlight
white & silver
Low-voltage halogen lamps 50W
Spherolit reflector High-pressure discharge lamps 20/35W
s
white & silver
Low-voltage halogen lamps 100W
Spherolit reflector High-pressure discharge lamps 70/150W
s
s
Spotlight
varychrome
white & silver
LED red, green, blue
Projection
spotlight
white & silver
Low-voltage halogen lamps 90W
High-pressure discharge lamps 70W
Projection
spotlight with
Goborotator
white & silver
Low-voltage halogen lamps 90W
High-pressure discharge lamps 70W
Spherolit
wallwasher
Low-voltage halogen lamps 50W
white & silver
Spherolit reflector High-pressure discharge lamps 20/35W
wallwash
s
white & silver
Low-voltage halogen lamps 100W
Spherolit reflector High-pressure discharge lamps 70/150W
wallwash
s
Lens wallwasher
16
s
s
white & silver
Low-voltage halogen lamps 50W
High-pressure discharge lamps 20/35W
s
white & silver
Low-voltage halogen lamps 100W
High-pressure discharge lamps 70/150W
s
ERCO Program 2008/09
www.erco.com
Cantax
The new Cantax range of spotlights clearly demonstrates how
design and innovation can help
in an aesthetic way to make technical equipment simpler and
clearer, instead of increasingly
complicated. Based on ERCO’s
latest developments in lighting
technology, the Cantax range is a
logically structured system which
provides a professional quality of
light in shops, galleries, restaurants or residential areas, while
making a striking, highly contemporary design statement with a
shape made up of basic geometric forms.
As with Emanon spotlights,
ERCO has provided Cantax with
the new Spherolit reflectors,
which are available in four light
distribution patterns, from narrow spot to wide flood, and as a
Spherolit wallwasher. In addition
to a superior quality of light, they
provide the option of replacing
the interchangeable reflectors
in next to no time to change the
light distribution. When using an
appropriate wallwash version of
the Spherolit reflector, the light
distribution can even be changed
to that of a wallwasher without
altering the outer appearance
of the spotlight. Alternatively,
Cantax is also available with the
classic lens wallwasher technology for vertical illumination. Naturally, the Cantax range with its
spotlights, wallwashers and acceswww.erco.com
sories also comprises exclusive
ERCO technologies such as DALIcompatible Light Clients or the
varychrome spotlight with colourcompensating LED technology.
The housing and the bracket on
one side with concealed cables
are of cast aluminium with black
or white powder-coating.
Cantax design
Designer Naoto Fukasawa says
of his concept for the Cantax
range of spotlights:
Design is about creating a
pleas ant harmony between
man, his objects and the environ ment. With the evolution
of technol ogy, our demand
“This lighting tool lights up
for comfort and convenience
walls and surfaces. It connects keeps increas ing so that conthe round shape of the beam
tinual efforts are required to
with the square shapes of the
maintain this process of coorilluminated surfaces. Rather
di nation and harmonisation.
than being without shape or
Focusing on design quality
form, the light is directed – as
does not mean keeping to one
visualised by the design of the
lifestyle or one technology.
spotlights. Architecture with its Rather, we must never stop
right angles calls for rectangu- considering new solutions so
lar light sources. Consequently, that the necessary, constant
we have given Cantax the basic change proves a pleasant expeshape of a pure, flat cuboid
rience.”
to represent this connection.
All we have done is add simwww.naotofukasawa.com
ple, universal hinge joints and
then combine these elements
very carefully to produce a
fully coherent, uncompromising shape, yet one which integrates harmoniously with its
environment.
It may be possible one day
to control the shape of light
fully like a data projection.
Light will become digitalised
information; light will provide
intelligent functions. The use
of light will develop into a software technology, while the
housings and the lighting technology will rise to ever higher
standards of quality to adapt to
their environment and tasks.
ERCO Program 2008/09
17
Cantax: system design
Spherolit reflectors
The Cantax spotlights universally use the advantages of the
innovative Spherolit reflectors:
a superior quality of light and
flexible use thanks to the option
of exchanging the reflectors in
next to no time. The reflectors
can be replaced without tools
and are available with 4 spotlight
characteristics and as a Spherolit
reflector, wallwash.
Narrow spot
Rotationally
symmetrical light
distribution,
beam angle < 10°
Spot
Rotationally symmetrical light distribution, beam
angle 10°-20°
Flood
Rotationally symmetrical light distribution, beam
angle 25°-35°
Wide flood
Rotationally symmetrical light distribution, beam
angle > 45°
Wallwash
Asymmetrical
wallwasher light
distribution
Lens wallwasher
Classic lens reflector technology
with wallwasher
attachment
The specially
designed joints
of Cantax guarantee lasting precision, effortless
alignment and
a secure fit. The
end positions are
defined by stops.
The Cantax LED
varychrome spotlight comprises
the exclusive
ERCO colour compensation technology and can
be conveniently
controlled via
Light System DALI
and the Light
Studio software.
18
ERCO Program 2008/09
www.erco.com
Product overview Cantax
Spotlight
white & black
Low-voltage halogen lamps 50W
s
white & black
Low-voltage halogen lamps 50W
Spherolit reflector High-pressure discharge lamps 20W
s
Low-voltage halogen lamps 100W
white & black
Spherolit reflector High-pressure discharge lamps 35/70W
s
LED red, green, blue
s
Spotlight
varychrome
white & black
Spherolit
wallwasher
Low-voltage halogen lamps 50W
white & black
Spherolit reflector High-pressure discharge lamps 20W
wallwash
s
Low-voltage halogen lamps 100W
white & black
Spherolit reflector High-pressure discharge lamps 35/70W
wallwash
s
Lens wallwasher
www.erco.com
white & black
Low-voltage halogen lamps 50W
High-pressure discharge lamps 20W
s
white & black
Low-voltage halogen lamps 100W
High-pressure discharge lamps 35/70W
s
ERCO Program 2008/09
19
Light System DALI
The interaction of control software, control hardware and
addressable luminaires in ERCO’s
Light System DALI has opened up
new dimensions of scenographic
design possibilities for lighting
users. Following its principle of
“tune the light“, ERCO consistently continues to pursue this
concept by steadily increasing its
range of Light Clients, the DALIcompatible luminaires from ERCO
– but also by continuously further
developing the hardware and software functions of Light System
DALI itself and improving its userfriendliness.
The Light
Sequencer introduces two new
lists: the sequence
list, which contains the defined
sequences, and a
work list, which
specifies the
scenes included
From the Light
Studio scene list,
the user selects
the scenes to be
combined into a
sequence.
in the current
sequence. The
actions and fading times for each
scene can be set
individually.
Light Sequencer
The Light Sequencer is a further
module added to the Light Studio
software which provides new functions and considerably increases
the possibilities of using Light
Studio DALI for scenographic concepts. Dynamic progressions and
timer functions were already available as facilities to set light in
motion. The Light Sequencer is a
tool used to define, name, store
and edit sequences of light scenes
in a timed progression and to recall
them through program control.
The Light Sequencer uses the
familiar elements of the Light
Studio user interface, such as the
scene list, to make the new functions intuitively accessible to the
user.
ERCO Light Studio
Light Studio is the integrated software for the
ERCO Light System DALI. It is used
for setting up light scenes and for
other, more complex operating
procedures. To increase convenience and to provide new functions or luminaire features, the
Light Studio is regularly updated.
Further information:
www.erco.com/lightstudio
Goborotator
Particularly convenient tools
for using complex, digitally controlled lighting equipment are one
of the main advantages of Light
System DALI and Light Studio.
Even for the new Goborotator
luminaires, Light Studio provides
a software tool which opens up
the whole range of creative possibilities and makes them usable.
The direction of
rotation of each
gobo can be set
individually.
20
ERCO Program 2008/09
www.erco.com
Light System DALI
max. of
4 inputs
Digital inputs
The redesigned digital inputs
of the ERCO Light Server now
facilitate the connection of a
wide range of alternative digital
input devices beyond simple pushbuttons. Obvious application scenarios include the recall of defined
scenes using movement sensors or
twilight switches. Furthermore, a
radio receiver module can be used
to integrate battery-free remote
controls or radio wall switches as
operating elements with minimal
installation requirement into a
Light System DALI.
Day situation: The
users in a building
select individual
light scenes based
on the ambient
lighting.
Night situation:
When reaching a
specified switching threshold, a
twilight switch
activates a special light scene
to produce a
defined nighttime appearance
of the building.
Typical application of movement
or presence sensors: sensitive
exhibits in a gallery are only illuminated when
visitors enter the
room.
The radio pushbutton module
allows the control
of Light System
DALI (scene selection, master dimming) using batteryless 4-channel
remote controls
or 4-channel wall
transmitters.
www.erco.com
ERCO Program 2008/09
21
Wallwashing out of the ground
In a qualitative, perceptionoriented lighting design, vertical
illuminances play a major role.
ERCO meets this requirement
by providing an exceptionally
wide range of appropriate lighting equipment with a wide beam,
asymmetrical light distribution. Today, it includes not only
wallwashers for recessed ceiling
installation or for track mounting,
but also luminaires for recessed
floor mounting both indoors and
outdoors, which provide vertical
illumination in different ways to
suit the situation.
Outdoor area
In the outdoor area, high-quality
wallwashing is useful, for example, for the uniform illumination
of facades or walls. Recessed floor
luminaires are a solution, which
integrates particularly discreetly
with the architectural environment. Depending on the requirements, different technologies can
be used to produce diverse results.
The Tesis range includes three different types of wallwasher. Their
properties are shown in the followTesis focal
ing illustrations.
wallwasher
Highly efficient
wallwashing with
a focal point
approx. at eye
level. Lamp cover
Indoor area
In indoor areas, wallwashing is
usually provided from the ceiling.
The role of recessed floor luminaires is more one of producing
effect lighting, as the unusual
direc tion of their light attracts
attention. The Nadir range of recessed floor luminaires for indoor
areas now includes a special grazing light wallwasher as lighting
tool for vertical illumination, this
is mounted close to the wall to
meet the requirements of real-life
situations. The designer has the
choice between rhythmic wall illumination due to the intersecting
beams of directional luminaires or
a uniform grazing light that underlines the structure and material of
the wall.
22
as diffuser with
clearly perceptible luminance.
Tesis lens
wallwasher
Wallwashing that
meets the highest standards of
uniformity, with
round or square
front lens. DarkTesis wallwasher
light reflector,
The front lens
40° cut-off angle. above the mounting plane ensures
that the beam
meets the surface
very low, right
from the edge
of the floor, to
ensure optimum
glare protection.
Maximum uniformity.
Nadir
Flat, widespread
beam for grazing light effects,
mounted close to
the wall.
ERCO Program 2008/09
www.erco.com
Tesis IP68
Tesis is the well-established range
of recessed floor luminaires in
protection mode IP68 for universal use in outdoor areas. The versions with square front lens in the
Tesis range have now been completely redeveloped. In this shape,
which designers prefer in specific
architectural situations not least
for aesthetic reasons, the Tesis
recessed luminaires are available
as directional luminaires, as LED
varychrome recessed floor luminaires, and in various wallwasher
characteristics. The lamps predominantly used include metal
halide lamps in different wattages, which have a high energy
efficiency and long life and thus
ensure economic operation.
The Tesis lens wallwashers,
which are available with both
round and square front lens, are
supplemented by a further two
types of wallwasher which, for
design reasons, are reserved to
the new, square version: firstly,
the Tesis focal wallwasher with
a focal point of the light in the
lower third of the wall, and secondly, the Tesis wallwasher with
front lens above the mounting
plane.
The additions
to the Tesis
range with
square recessed
floor luminaires
are complete
redevelopments
with their own
characteristics
profile.
A separate
IP68 control
gear allows the
rational connection of recessed
www.erco.com
ERCO Program 2008/09
floor luminaires
including throughwiring.
23
Product overview IP68
Focal wallwasher
Lens wallwasher
Wallwasher
Directional
luminaire
Recessed floor
luminaire
vary chrome
24
Size 5
High-pressure discharge lamps
20/35W
s
Size 7
High-pressure discharge lamps 70W
s
Size 5
High-pressure discharge lamps
20/35W
s
Size 7
High-pressure discharge lamps 70W
s
Size 5
High-pressure discharge lamps 35W
s
Size 7
High-pressure discharge lamps 70W
s
Size 5
High-pressure discharge lamps
20/35W
s
Size 7
High-pressure discharge lamps
70/150W
s
Size 5
LED red, green, blue
ERCO Program 2008/09
s
www.erco.com
Nadir IP67
Since the unusual direction of
their light attracts attention,
lighting designers like to use
recessed floor luminaires even in
indoor areas. However, recessed
floor installation is usually more
complex than mounting the luminaires to or in the ceiling. Consequently, when the Nadir recessed
floor luminaires for indoors were
completely redeveloped, ERCO
focused its efforts not only on the
usual sophisticated lighting technology but also directed attention
to a safe and simple mounting
solution with superior finish.
The height-adjustable frame of
the recessed floor housing now
compensates for dimensional tolerances between floor slab and
finished floor. The shallow recess
depth of 100mm makes the luminaires suitable for many applications in architecture. The Nadir can
even be mounted in floating floor
screed without forming sound
bridges. The front covers are round
or square; particular highlights in
the range include luminaires with
special characteristics such as the
grazing light wallwashers or with
innovative lamps such as LEDs.
www.erco.com
– even in floors
The elegant,
edgeless mount- made of highquality material.
ing detail makes
the Nadir recessed
floor luminaires
an adequate
design element
For a flush surface and to compensate dimensional tolerances,
the position of
the luminaires
can be precisely
adjusted during
mounting using
height adjustment
screws.
As is the case
with a wide range
of ERCO lighting
equipment, the
Nadir now also
allows alternative mounting
options without
special accessories: depend ing
on the position of
the cover frame,
either edgeless
flush floor mounting or overlapping.
ERCO Program 2008/09
25
Product overview Nadir IP67
Grazing light
wallwasher
Directional
luminaire
Recessed floor
luminaire
vary chrome
26
Size 4
LED daylight white, warm white
Low-voltage halogen lamps 20W
s
Size 4
LED daylight white, warm white
Low-voltage halogen lamps 20W
s
Size 5
High-pressure discharge lamps 20W
s
Size 5
High-pressure discharge lamps 20W
s
Size 4
LED daylight white, warm white
Low-voltage halogen lamps 20W
s
Size 4
LED daylight white, warm white
Low-voltage halogen lamps 20W
s
Size 5
High-pressure discharge lamps 20W
s
Size 5
High-pressure discharge lamps 20W
s
Size 4
LED red, green, blue
s
Size 4
LED red, green, blue
s
ERCO Program 2008/09
www.erco.com
Kubus
Using well-integrated lighting
technology, the Kubus range of
luminaires carries the ERCO principle of “Light, not luminaires” to
positive extremes – less luminaire,
after all, is hardly conceivable. The
miniaturised light sources, inconspicuous, ultra-compact cuboids
with robust housings made of cast
aluminium, are completely immaterial compared to their striking
lighting effect as floor washlights
or facade luminaires.
Their high energy efficiency
and extended maintenance cycles
are due to the modern metal
halide lamps and LEDs. Two housing sizes of the Kubus completely
exhaust the packing density for
the appropriate light source: a line
for the metal halide lamp HIT-CE
20W is available for enormous
output from a compact housing;
as an absolutely minimised solution, Kubus is available with highpower LEDs for even smaller housing dimensions. Despite all the
integration, the Kubus luminaires
are provided with efficient, innovative lighting technology which
allows interesting areas of application. And each individual Kubus
model creates a particular lighting effect.
So, for example, the Kubus
facade luminaire with LEDs is used
to produce a delightful grazing
light effect, while the HIT version
of the facade luminaire features
distinctly asymmetrical, flowing
characteristics. The floor washwww.erco.com
lights with LED provide a choice
between conventional, extensive
light distribution and a more widespread version that follows the
path. Additional mounting options
arise from a recessed wall housing and an upright supporting
pole, which can be used to transform the Kubus into an elegant
bollard luminaire. One aspect that
holds true for all Kubus luminaires
is that their visual comfort meets
the highest standards.
Small luminaire,
big effect: in the
outdoor area, the
lighting effects of
Kubus are often
enough to ensure
good orientation
and spatial perception.
The Kubus facade
luminaires can be
mounted to emit
their light either
upwards or downwards.
ERCO Program 2008/09
27
Kubus
The cables
can be routed
safely in the
upright supporting poles available as mounting
accessories.
Depending on the
required characteristics, there are
various mounting
alternatives. All
Kubus luminaires
can be used on
walls as surfacemounted versions.
Kubus floor washlights can also be
mounted on an
upright supporting pole available
as an accessory
and freely positioned in an area
for use as a bollard luminaire.
For the LED floor
washlights, the
choice includes
a conventional,
extensive light
distribution and
a more wide-
spread version
which follows
the path.
The Kubus can
be mounted to
suit any situation using the
ERCO range of
accessories: a
mounting plate,
an upright supporting pole, a
base, and a concrete anchor.
The floor washlights are also
suitable for flush
wall mounting
using the recessed
housing or mounting plate available
as accessories.
High-power LEDs
as light sources
need special lighting systems consisting of reflectors and lenses
to be used effectively for illumination. These systems made of
high-quality optical materials are
developed and
produced by ERCO
28
ERCO Program 2008/09
itself. LEDs are
energy-efficient
and practically
maintenance-free
– a key benefit
particularly in the
outdoor area.
www.erco.com
Product overview Kubus
Floor washlight
Facade luminaire
www.erco.com
LED daylight white, warm white
s
High-pressure discharge lamps 20W
s
LED daylight white, warm white
s
High-pressure discharge lamps 20W
s
ERCO Program 2008/09
29
Midipoll
The Midipoll bollard luminaire
provides architects, lighting and
landscape designers with a tool
which competently performs not
one but several tasks: Midipoll is
not only an efficient instrument
for outdoor area lighting, but
itself also serves as an unobtrusive, space-dividing element –
both during the day and at night.
The light beam emitted from the
abso lutely glare-free, shielded
front lens illuminates the surrounding area while also grazing
the elegant, cross-shaped profile
to produce a discreet luminance
on the bollard itself.
Midipoll is ideal for a variety
of applications: to reveal open
areas, but also to follow path ways or accentuate focal points.
Thanks to its rational design and
the latest lighting technology,
Midipoll combines cost-effective
procurement and operation with
ERCO’s high standard of sturdiness, design and lighting quality.
A significant level of energy efficiency and long maintenance
cycles are ensured by innovative
light sources such as metal halide
lamps and LEDs. Using the Dark
Sky technology, Midipoll prevents
spill light above the horizon line.
Exclusive lighting elements such
as the complex prism lens of the
LED models made of high-quality
polycarbonate are developed and
produced entirely by ERCO – from
the computer calculation to precision tool manufacture to the pro30
duction in ERCO’s own injection
moulding facility.
The housing and profile are
both of cast aluminium with the
tried and tested multi-layer powder coating that enables them to
withstand any weather condition
for many years. Depending on the
ground, the appropriate mounting
accessories ensure rational installation options.
ERCO Program 2008/09
The cover glass
of the bollard
luminaire is fully
concealed from
view. A lens
spreads the light
onto the ground
but also illuminates the crossshaped aluminium profile to
provide a discreet
focal point.
www.erco.com
Midipoll
The models for
HIT lamps are
available as 20W
or 35W version
and provide a
choice of two
heights.
Midipoll with LED
module 4x2.5W
is available in the
light colours daylight white and
warm white.
Due to its quartered light emission, the Midipoll
has a double axially symmetrical,
rather than an
absolutely round,
light distribution.
Midipoll provides
various mounting
options: concrete
anchor, ground
socket or mounting plate. The
wall plate enables
rational throughwiring.
Midipoll for HIT
lamps feature an
optimised glass
flood lens as
front cover.
The Midipoll bollard luminaire for
LEDs uses a recalculated prism lens
made of plastic to
spread the light
of the high-power
LEDs over a wide
area.
www.erco.com
ERCO Program 2008/09
31
Product overview Midipoll
Bollard luminaire
32
LED daylight white, warm white
High-pressure discharge lamps 20/35W
s
LED daylight white, warm white
High-pressure discharge lamps 20/35W
s
ERCO Program 2008/09
www.erco.com
Lightmark floor washlights
The Lightmark range consists of a
diverse system of outdoor luminaires with different flood light
distributions and cuboid forms to
integrate precisely and inconspicuously into architecture as well as
square and landscape design. In
addition to the bollard luminaires
and facade luminaires already
available, ERCO now also offers
Lightmark luminaires for wall
mounting. These make it possible for lighting concepts for open
areas and pathways to change
seamlessly from free-standing
bollards to floor washlights integrated flush in walls.
In terms of lighting technology,
the Lightmark floor washlights for
wall mounting are similar to bollard luminaires: they are fitted with
highly efficient light sources such
as metal halide lamps, low-voltage
halogen lamps or compact fluorescent lamps and feature different
light distribution patterns. Glare
protection and visual comfort are
of the highest standard, while the
Dark Sky technology prevents any
spill light above the horizon line.
www.erco.com
The mounting accessories
include a frame
for surface
mounting and a
concrete housing.
The luminaires
for recessed wall
installation complement the established range of
Lightmark bollard
luminaires for
open area lighting.
ERCO Program 2008/09
33
Product overview Lightmark
Floor washlights
Pathway lighting
s
Low-voltage halogen lamps 50W
High-pressure discharge lamps 20/35W
Fluorescent lamps 18W
Open area lighting
s
High-pressure discharge lamps 35W
Bollard luminaire
Pathway lighting with single-sided light
emission
s
Tungsten halogen lamps 150W
High-pressure discharge lamps 35W
Fluorescent lamps 18W
Pathway lighting with single-sided light
emission
s
Tungsten halogen lamps 150W
High-pressure discharge lamps 35W
s
Pathway lighting with double-sided light
emission
Tungsten halogen lamps 150W
High-pressure discharge lamps 35/70W
s
Pathway lighting with double-sided light
emission
Tungsten halogen lamps 150W
High-pressure discharge lamps 35W
Open area lighting
s
High-pressure discharge lamps 35W
Facade floodlight
s
High-pressure discharge lamps 35/70W
Facade luminaire
with single-sided light emission
s
Tungsten halogen lamps 150W
High-pressure discharge lamps 35W
with double-sided light emission
s
Tungsten halogen lamps 300W
High-pressure discharge lamps 70W
34
ERCO Program 2008/09
www.erco.com
Floor washlights
The complete redevelopment
of the ERCO range of floor washlights focused on two aspects:
the integration of modern light
sources such as LEDs and more
flexibility in terms of trim detail
design. In addition, ERCO’s design
engineers devised reflectors with
a new surface that proves particularly scratch-resistant and easy
to clean. Apart from its excellent
reflection capacities, the satin
matt silver coating ensures that
the discreet luminance of the
reflector surface provides the
desired effect and turns the floor
washlights into an architectural
element.
The light sources themselves
are fully concealed from view and
protected against the ingress of
dust and dirt by using a Softec
lens as safety glass. Low-maintenance light sources such as metal
halide lamps or maintenancefree LED lamps underline the fact
that the ERCO floor washlights
are truly efficient and economical
lighting tools suitable for problemfree operation over long periods
of time.
www.erco.com
The mounting
frame is available
with two optional trim details for
mounting in drywall partitions:
optionally with
cover edge or
flush mounted.
Floor washlights
are used to provide discreet and
safe lighting for
traffic areas, hallways and stairs.
Due to its luminance, the new
satin matt reflector surface stands
out as an architectural element that
is both scratchresistant and easy
to clean.
ERCO Program 2008/09
35
Product overview Floor washlights
Floor washlights
36
LED daylight white, warm white
Low-voltage halogen lamps 20W
High-pressure discharge lamps 20W
s
LED daylight white, warm white
Low-voltage halogen lamps 20W
High-pressure discharge lamps 20W
s
ERCO Program 2008/09
www.erco.com
Compact HIT
Compact HIT represents an
entirely new approach to downlight lighting and is made possi ble only by the exclusive ERCO
innovation of Spherolit reflectors.
In order to achieve a revolutionary
combination of light efficiency,
compact recessing dimensions,
visual comfort, and cost-effectiveness, the Compact HIT follows
an alternative path to Darklight
technology, a characteristic of the
remaining ERCO range of downlights: the exclusive use of energyefficient metal halide lamps with
a connected load of 20W to 70W –
naturally with electronic control
gear – ensures high luminances
of the wide beams emitted by
Spherolit reflectors with a wide
flood light distribution. An antidazzle cap with mirror-finish
exterior effectively shields the
lamp. The attractive, almost magical appearance of Compact HIT
in the ceiling is defined by bright
reflections and the non-reflecting
safety glass, which makes it ideal
for prestigious rooms in the retail
sector or in administrative buildings.
Easy mounting
and the compact
dimensions of
Compact HIT are
aspects which
can have a positive effect on
the overall costeffec tiveness of a
building project.
130
100
50
0
30°
In the Spherolit
reshape it into a
The Spherolit
comfort and an
beam with ideal
reflector, the non- attractive appear- reflector, hundreds of individ- properties.
reflecting safety
ance.
ually domed sub
glass, and the
areas disperse the
mirror-finish antilight from the
dazzle cap prolight source and
vide high visual
www.erco.com
ERCO Program 2008/09
37
Product overview HIT
Downlight
38
Size 3
Spherolit reflector
wide flood
High-pressure discharge lamps 20W
s
Size 4
Spherolit reflector
wide flood
High-pressure discharge lamps 35W
s
Size 5
Spherolit reflector
wide flood
High-pressure discharge lamps 35/70W
s
ERCO Program 2008/09
www.erco.com
Compar
The development of the Compar
recessed spotlights was based to
a degree on the requirements of
the retail sector in the area of
shop lighting. The Compar range
provides a combination of innovative lighting technology, rational
detail solutions and flexible
system design. As a result, all the
spotlights have Spherolit reflectors for a superior quality of light.
The light distribution patterns
include the rotationally symmetrical narrow spot, spot, flood and
wide flood reflectors and the
Spherolit reflector, wallwash, for
asymmetrical light distribution.
New in the ERCO Program is the
Compar recessed spotlight with
display lens: depending on the
version with flood or spot reflector, this lighting tool produces an
oval-shaped beam of different
dimensions and is suitable for the
highly efficient illumination of
product presentations with wide
luminaire spacing. Fitted with
economical, long-life lamps, the
luminaires are available for either
HIT or HST.
The aluminium
mounting ring
can be mounted
in false ceilings
without tools by
using three bracing springs. The
spotlights can
be tilted up to
30° and rotated
through 360°.
30°
30°
www.erco.com
360°
ERCO Program 2008/09
39
Compar
Compar recessed
spotlight with
Spherolit reflector,
spot + display lens
The powerful,
bright light of
the HIT lamps
makes fresh
products in selfservice areas
appear natural
and appetising.
Compar forms a system of recessed
ceiling spotlights with an as yet
unparalleled variety of seven different light distribution patterns.
Producing a uniform, aesthetic
appearance in the ceiling, the
Compar can be used effectively
for complex lighting tasks. Different spotlight characteristics in
Spherolit technology ensure flexibility to produce extraordinary
highlights, while the Spherolit
wallwasher emphasises the vertical room surfaces. The spotlights
with display lens are particularly
suitable for the efficient illumination of product presentations in a
linear arrangement, such as tables
and shelves. The selection of light
sources – both metal halide lamps
and high-pressure sodium vapour
lamps – and wattages provide
additional design possibilities.
40
The new display
lens produces
a brilliant, precise, horizontally
spread beam of
light. In contrast
to the sculpture
lens, its only
structuring are
the grooves for
light distribution,
and it features
an anti-dazzle
cap for defined
visual comfort.
The beam angles
vary depending
on whether the
display lens is
combined with
a spot or a flood
reflector.
Compar recessed
spotlight with
Spherolit reflector,
narrow spot
Compar recessed
spotlight with
Spherolit reflector,
spot
ERCO Program 2008/09
Compar recessed
spotlight with
Spherolit reflector,
flood
Compar recessed
spotlight with
Spherolit reflector,
wide flood
Compar recessed
spotlight with
Spherolit reflector,
flood + display
lens
Compar Spherolit
wallwasher with
Spherolit reflector,
wallwash
Designed for
use in the retail
sector, Compar
is also available
for HST 50/100W
lamps to highlight
specific types of
products optimally with warm
light tones.
www.erco.com
Product overview Compar
Recessed
spotlight
Spherolit
wallwasher
www.erco.com
Metal halide lamps 35/70W
Size 6
Spherolit reflector High-pressure sodium vapour lamps
50/100W
s
Metal halide lamps 35/70W
Size 6
Spherolit reflector High-pressure sodium vapour lamps
50/100W
+ display lens
s
Metal halide lamps 35/70W
Size 6
Spherolit reflector High-pressure sodium vapour lamps
50/100W
wallwash
s
ERCO Program 2008/09
41
Efficient visual comfort
Lighting requires energy. Anyone
involved in any aspect of lighting
– from the manufacturer to the
designer and the user – should use
the limited resources responsibly.
Even under the pressure of rising
energy prices, architectural lighting has made enormous progress
over the past few years and has
already achieved a significant level
of efficiency. The efforts in this
area must not be reduced – on
the other hand, energy efficiency
should not be sought at any price,
especially not at the expense of
the quality of light. ERCO sees
further potential for the effective
use of our resources particularly
in the following areas:
Effective lighting technology
Efficient, precise optical systems
lower the energy requirement for
lighting. Innovations such as the
ERCO Spherolit reflectors combine
a high light output ratio with visual comfort. Only tools which give
the user complete control of the
light, allow effective planning and
design.
Thermal management
In practice, all artificial light
sources generate excess heat.
As part of ERCO’s resource-conscious thinking, the luminaires
are designed so as to allow a
constructive dissipation of this
heat to ensure that the lamps and
heat-sensitive electronic components such as LEDs or control gear
can work to capacity throughout
their entire life.
Modern control gear
Electronic control gear not only
ensures greater comfort than conventional control gear, it is also a
lower-loss, more compact version
and protects the lamps. On the
whole, it is a far more resourcesaving option. Incidentally, ERCO
exclusively uses lead-free soldered
electronic components.
Intelligent lighting control
DALI technology from ERCO makes
scenic lighting uncomplicated and
economical. Light scenes to suit
each situation are selected and
controlled by the user and together
with automated light management
Efficient lamps
involving sensor systems and timer
ERCO provides an exceptionally
programs provide enormous potenwide range of products for use with tial savings.
the economical and long-lasting
metal halide lamps, but also for
Qualitative lighting design
compact fluorescent lamps. FurCareful, perception-oriented lightthermore, ERCO is significantly
ing design uses light specifically
involved in the development of LED where it meets the requirements
lighting equipment and thus prac- of the user: vertical lighting, for
tically utilises the rapid progress
example, provides a subjectively
in terms of the luminous efficacy
high impression of brightness in
of LEDs.
a room. In the same manner, regulated accent lighting is usually
more effective than the provision
of a blanket high level of lighting.
A
QT, QPAR
QT-NV
T
TC
HIT-CE
HST
LED
20
40
60
80
Light output
ratio
The table shows
the average light
output ratios
of today’s lamp
types. The differences speak
for themselves –
Accent lighting
Qualitative lighting design concentrates on the
essentials in architecture and thus
produces many
possibilities to
lower energy
consumption.
42
Scenic lighting
Light scenes
recalled only
where required
provide enormous energy
savings potential
– whether manually controlled
or automated by
timer or sensors.
ERCO Program 2008/09
100
:(lm/W)
nevertheless, a
qualitative lighting design should
never be based
solely on the
light output ratio
as the only criterion for lamp
selection.
Vertical lighting
Wallwashing is
one example of
how perceptionoriented lighting
design with a
lower connected
load can provide
a brighter impression of the room.
www.erco.com
Illumination of vertical surfaces
Light can be used to define and
continually reinterpret spaces.
Looking at walls and other vertical surfaces, it is clear that
these are crucial for the perception of architecture: illuminated
walls allow us to perceive the
shape and dimensions of a room.
When illuminated in perfect uniformity, the wall appears light,
almost intangible. Objects such
as photos, posters or paintings
can be viewed in optimal conditions. Vertical illumination creates a subjective impression of
significant brightness in the room
and can contribute to energy saving. The lighting equipment used
for this type of lighting is called
wallwashers. ERCO has developed
and perfected these special luminaires for decades. The result is a
range of tools for the illumination of vertical surfaces which is
as yet unparallaled in terms of its
extent and distinction. The different types of wallwasher and their
typical applications are presented
on the following pages.
Wallwashing and
accent lighting
Wide, vertical
illumination
as background,
together with
accentuating,
directed illumination in the
foreground form
a classic concept
for highlighting
objects in the
room.
Successful
wallwasher illumination can be
so subtle that
it is hardly perceived as such,
but rather as a
pleasant level of
brightness in the
room. The diffuse
light reflected on
the wall contributes to the ambient lighting.
Wallwashing:
play of brilliants
Vertical surfaces
in the room are
transformed by
appropriate lighting equipment to
become screens
used for dynamic
lighting effects.
Plays of colours
or projections
become an attractive eyecatcher.
www.erco.com
ERCO Program 2008/09
43
Illumination of vertical surfaces
The applications illustrated describe
a widespread, uniform wall illumination with different optical systems
and a wide range of lamps. To ensure
optimal uniformity and high illuminances, the following is recommended:
Wall height
up to 3.0m 4.0m
Offset from wall
1.0m 1.5m
When the wallwashers are arranged
in a row, the luminaire spacing should
be the same as the offset from the
wall. With some luminaires, this can
be up to 1.5 times the offset from
the wall. In addition, the wall and
spacing distances documented in
the publications provide information
on optimal arrangements and the
expected illuminances.
Lens wallwashers
The reflector technology used here
is suitable for the highest museum
quality. Lens wallwashers illuminate
walls from the ceiling to the floor.
The light is spread in longitudinal
direction by special lenses. Reflectors
distribute the luminous flux evenly
on the wall and shield the lens wallwashers to prevent glare in the room.
The wallwashers illustrated are operated on tracks.
Lens wallwashers
Special lens wallwasher systems
ensure a uniform illumination of the
wall. The light is spread by lenses,
while the reflectors direct it onto
the wall. The Darklight reflectors
visible from below are glare-free.
Wallwashers with LED varychrome
also produce scenic effects on vertical surfaces.
Lens wallwashers
These lens wallwashers distinguish
themselves by their high visual comfort. Darklight reflectors with a cutoff angle of 40° let the luminaires
appear dark. Only the cover glass is
visible above the cut-off angle. A
wallwasher lens system distributes
the luminous flux on the wall to provide an illuminance distribution of
the highest level of uniformity.
Washlights
As recessed ceiling luminaires, these
wallwashers are no different to downlights. The internal reflector segment
distributes the light uniformly on the
wall surface, while the downlight effect
is maintained. Washlights are available
for low-voltage halogen lamps, tungsten halogen lamps, high-pressure
discharge lamps, and compact fluorescent lamps.
44
ERCO Program 2008/09
www.erco.com
Illumination of vertical surfaces
Double focus wallwashers
This type of wall illumination provides
the highest level of uniformity for
vertical illuminances. The effect of
these wallwashers is achieved using
special, internal wallwasher reflectors.
Due to the total shielding of the
lamp, the Darklight reflector produces an improved optical effect. There
is no spill light in areas of the room
near to the walls.
Focal wallwashers
The use of metal halide lamps in
Lightscan wallwashers makes them
particularly suitable for the general
lighting of walls in shops and presentational area. They produce a focal
emphasis in the upper third of the
illuminated area, e.g. for the illumination of displays above shelves.
Focal wallwashers
A diffuser and a wallwasher reflector distribute the light of Tesis on a
façade in a way that produces a visible focal emphasis at approx. 1/3 of
the height. The lens below the safety
glass produces a wide beam and distributes the luminous flux uniformly
on the cover glass. This means that
the luminaire is visible even when
viewed from shallow angles.
Wallwashers
Wallwashers in the Optec range are
track mounted and provide an ideal,
uniform illuminance distribution
from ceiling to floor. The area in
front of the wall is also illuminated.
The range comprises various types
of luminaires for almost all lamps.
Wallwashers
With Paratec wallwashers, part of the
luminaire projects from the ceiling.
The beam intersects with the wall
directly in the upper corner, while
the illuminated surface remains practically invisible to the viewer. A special wallwasher reflector provides
the highest level of uniformity. These
wallwashers combine a high degree
of visual comfort with maximum
efficiency.
www.erco.com
ERCO Program 2008/09
45
Illumination of vertical surfaces
Wallwashers
With Tesis wallwashers, part of the
luminaire is above the mounting
plane. Thus, the luminaire cannot be
walked on or rolled over by vehicles.
The beam intersects with the wall
directly above the mounting plane.
The illuminated surface remains
practically invisible to the viewer.
A special wallwasher reflector and
a Softec lens provide the highest level of uniformity.
Wallwashers
Designed for high-pressure discharge
lamps and compact fluorescent lamps,
they are available especially for wall
illumination and shop lighting in
sales rooms and shops. On these wallwashers, the peak intensity is emitted
at approx. 30° and produces the vertical illuminances important for the
required spatial effect.
Wallwashers
Parscoop wallwashers and floodlights are provided with asymmetrical beam reflectors. These reflectors
are designed so that the light distribution is ideal for uniform facade
lighting. In addition to the main
mounting option on the ceiling or
the floor to illuminate facades, they
can also be mounted on walls to provide uniform ceiling illumination.
Wallwashers
The special reflector technology
of TFL wallwashers for fluorescent
lamps provides a uniform and even
wall illumination, especially in museums. The DALI-compatible luminaires
have digitally addressable control
gear which allow each luminaire to
be addressed individually. TFL wallwashers can also be mounted as a
continuous arrangement.
The uniform
light distribution
from ceiling to
floor highlights
the wall as a
whole and makes
the room appear
more spacious.
46
ERCO Program 2008/09
www.erco.com
Illumination of vertical surfaces
Spherolit wallwashers
These wallwashers use Spherolit reflectors, wallwash. In these reflectors, the
individual spherolites are arranged
so as to produce an asymmetrical
light distribution. As opposed to lens
wallwashers, Spherolit wallwashers
can also be positioned in high rooms
or closer to the wall. With a focal
emphasis on the upper half of the
wall, they are ideal for the illumination of vertical surfaces in shops.
Grazing light wallwashers
These types of luminaire produce
grazing light and can be positioned at
close distance to the wall. Sculpture
lenses spread the width of the beam
along one plane, while maintaining a
narrow beam light distribution on the
other. In the round and square Nadir
recessed floor luminaires, the lamps
can be tilted and rotated by +/- 5° for
adjustment.
Facade luminaires
Focalflood facade luminaires are
available for high-performance LEDs.
The luminaire’s lens system has been
optimised so that a narrow beam light
distribution gives an efficient grazing
light on the wall surface. In the other
direction, a wide light distribution is
produced. The DALI-compatible varychrome version can be controlled via
the ERCO Light System DALI.
Facade floodlights
Facade floodlights are fitted with
asymmetrical reflector-lens systems.
They are effectively free of spill light.
The light distributions are designed
for even wall illumination or surfaces
without perceptible edges to the beam.
www.erco.com
ERCO Program 2008/09
47
Lighting control
Lighting control systems link
both indoor and outdoor luminaires in intelligent networks.
They combine the lighting hardware and software to produce a
user-friendly tool allowing innovative lighting technology functions, such as the varychrome
colour change technology, to be
utilised for scenographic lighting concepts. They also enable
lighting systems to be integrated
with the building technology for
professional light management.
Whether for a single room or an
entire building – the ERCO product range offers the optimum
solutions for lighting control
tasks of all sizes.
Parkside Restaurant at Stockholm
trade fair, Stockholm Älvsjö. Architect: Rosenbergs
Arkitekter, Stockholm, Akabaljev
Barrow Arkitekter,
Stockholm.
Darmstadt Evangelical Church,
Darmstadt. Lighting design: Prof.
Harald Hofmann,
Lüdenscheid.
48
ERCO Program 2008/09
www.erco.com
Lighting control
Scenographically
controlled light
with Light System
DALI at the ERCO
auditorium,
Lüdenscheid.
Guillaume at
Bennelong restaurant, Sydney Opera House, Syd ney.
Architect: Dale
Jones-Evans, Sydney. Lighting
design: Barry
Webb Design Pty
Ltd., Barry Webb,
Matt Tindale, Sydney.
www.erco.com
ERCO Program 2008/09
49
Lighting control systems
Lighting control systems from ERCO are
professional control systems for lighting management and scenic dimming.
By using such systems, the architecture
can be repeatedly reinterpreted along
functional, aesthetic and dramaturgical
lines. Intelligent lighting management
increases the comfort of the building and saves energy. It is equally possible to control light scenes via timer
functions as it is to program cyclical
sequences. ERCO lighting control systems are particularly suitable for controlling complex, atmospheric scenic
lighting installations in architectural
settings, e.g. in hotel foyers, lobbies,
shops, restaurants, bars or conference
rooms. Lighting control systems allow
dynamic and user-friendly control of
lighting tools with colour mixing function such as ERCO Varychrome luminaires.
Light System DALI
51
LON Area Net
61
50
ERCO Program 2008/09
www.erco.com
Light System DALI
The ERCO Light System DALI brings
an innovative approach to lighting control: intelligently applied
DALI (Digital Addressable Lighting Interface) technology for individually addressable luminaires,
combined with the ERCO Light
Studio software, form an integrated system for scenographic
lighting. Together with the comprehensive range of DALI-compatible ERCO luminaires for the indoor
and outdoor area and the ERCO
DALI track, this enables scenographic lighting effects such as
coloured light, dynamic progressions, light scenes, timer functions
and light sequences to be used in
architecture more simply and economically than ever before.
New standards in terms of ease
of operation, range of functions
and creative control are set by the
consistent integration of software
and hardware. For example, colour selection for DALI-compatible varychrome luminaires in the
ERCO Light Studio are determined clearly and interactively at the
click of a mouse. The bus technology and the switch and dimming
functions integrated into the control gear make a permanent wiring of individual circuits and the
installation of vast dimmer banks
in switch cabinets unnecessary.
Once a system is activated, the
DALI-compatible ERCO luminaires known as Light Clients - are automatically recognised by the Light
Server due to the factory-set codwww.erco.com
ing of the luminaire’s DALI control
gear and clearly displayed in the
software. DALI-compatible luminaires of other manufacturers can
also be integrated into Light System DALI and be controlled just as
easily as ERCO Light Clients. The
Light Server 64 for up to 64 DALI
addresses enables the Light System
to handle many typical lighting
control applications, as in multifunctional rooms, shops and shop
windows, restaurants, lobbies or
company showrooms.
Larger installations with over
64 addresses can be created by
networking up to twelve Light
Servers via the integrated Ethernet
interfaces. This makes it possible to
manage up to 768 DALI addresses.
In order to identify luminaires in
complex rooms with limited visual
contact, each Light Client has an
electronic luminaire ID stored in
the control gear and recorded
on a sticker, which is placed in
a lighting plan on site. The electronic luminaire ID is automatically recognised by the lighting
control software. The DALI Light
System consists of the hardware
components Light Server and Light
Changer and the software Light
Studio. The Light Server is a DALI
controller that stores system and
scene data and provides the control functions. Day-to-day operation takes place via the compact,
wall-mounted ERCO Light Changer
control panel, via push-buttons or
via remote control. To set up light
scenes and for more complex operations, designers or users can use
the ERCO Light Studio software on
a PC connected to the Light Server
or the Light Changer via a USB
connection. The Light Server uses
the DALI protocol to communicate with the Light Clients, i.e. the
connected DALI-compatible luminaires, via a two-core control line.
With DALI track accessories, the
well-established and reliable ERCO
track is ideal for the operation of
DALI-compatible ERCO spotlights
via Light System DALI.
ERCO Program 2008/09
Dreipunkt furniture showroom
at the Stilwerk
mall, Stuttgart.
Architect: Bernd
Schellenberg
(DREIPUNKT International). Lighting
design: Stephan
Haubner, Wesenlicht, Stuttgart.
51
Light System DALI
Software
The Light Studio software is used
to set up lighting installations with
Light System DALI and to make
its complex functions available
in a user-friendly format. It consists of four modules: Light Master,
Light Book, Light Timer, and Light
Sequencer. Light scenes, which
may contain coloured effects and
dynamic progressions, are created,
designed and edited in the Light
Master module. The Light Book
is used to organise and spatially
structure lighting installations.
The selection of the scene can
be automatically time-controlled
with the Light Timer. A sequence
of light scenes can be stored in
the Light Sequencer. An interface
for the configuration of Emanon
Goborotator is integrated in the
Light Master. The project data can
be printed out for documentation. The software is suitable for
the following operating systems:
Windows 2000, XP and Vista.
Output devices
The Light Server controls the
ERCO Light Clients. These can
be DALI compatible luminaires
and/or DALI compatible control
gear, dimmers, switching actuators or transformers. The data
for the luminaires, light scenes,
timer programs and the room
management is stored in the Light
Server. A PC installed with the
ERCO Light Studio software can
be connected via the USB port.
Every single Light Server 64+ can
address up to 64 DALI participants.
It has an interface enabling it to
be networked with additional
Light Server 64+ devices. A total
of up to 768 DALI addresses can be
managed via the integral Ethernet
interfaces. Four digital inputs for
customised configuration can be
used for push-buttons, movement
sensors or twilight switches. An
interface to the media system
can be created or a PC with Light
Studio connected via Ethernet.
Input devices
Stored light scenes and timer programs can be recalled by the Light
Server via the Light Changer. The
Light Changer has a user-friendly
touch screen for menu navigation.
A push-button for the On/Off function can switch all Clients on or off.
The plastic housing can be mounted on the plaster or flush mounted in the wall using the mounting frame. The Light Changer has
a USB interface for connecting a
PC to the Light System installation.
Batteryless remote controls or wall
transmitters and a radio control
receiver are available for the easy
recall of light scenes.
52
ERCO Program 2008/09
www.erco.com
Light System DALI
Accessories
The DALI switching actuator, DALI
dimmer or DALI transformer allows
luminaires, for example those
without DALI control gear, to be
integrated into the Light System
DALI. The mechanical accessories
enable wall mounting of the Light
Changer.
Entry Paradise
Pavilion (coal
washery, Zollverein colliery. Exhibition: Entry2006),
Essen. Architect:
Chris Bosse,
Sydney.
www.erco.com
ERCO Program 2008/09
53
Light System DALI
120V-240V
50-60Hz
DALI
Light Clients
ERCO track with DALI live end
Hub/Switch
Cat-5
Light Server
USB
Light Studio
Light Server 64+
12 max.
Light Changer
RS485
24V DC
--DALI control line
- USB connection
-- 24V DC
- Mains voltage
- RS 485 connection
Light Client: either lumi naire with its own DALI
control gear or a separate,
encoded DALI control gear
RS485
31 max.
Receiver
4 push-button
groups max.
System overview
The diagram shows how the
components of the Light System
DALI can be combined not only
with ERCO Light Clients but also
with conventional ERCO luminaires, with DALI-compatible
luminaires of other manufactures
and with additional peripheral
devices such as push-buttons.
The installation work is significantly reduced when compared
with that of other lighting control technologies: DALI technology integrates the switching and
dimming functions in the luminaire or in the control gear, while
the 2-core control line connects
all participating devices in any
topology. The power supply to
the luminaires is constant and
independent of the DALI wiring.
54
Light Server
The Light Server 64+ is a DALI
controller that stores system and
scene data and provides the control functions. Its compact design
gives it great flexibility when
choosing a mounting location.
The ERCO Light Studio software is
included with every Light Server.
A PC can be connected via the
USB interface. The integral Ethernet interface can be used to network several Light Servers.
ERCO Program 2008/09
Movement sensor/
twilight switch
Remote control
Radio push-button
Light Client
DALI-compatible ERCO luminaires
– known as Light Clients – are preprogrammed with a factory-set
code of their DALI control gear.
This allows them to be automatically recognised and clearly displayed by the Light Server and the
Light Studio software. The selection of Light Clients currently available covers the most important
areas of the ERCO product range.
In particular, it also includes Varychrome luminaires whose colour
change function can now be simply and intuitively controlled with
unparalleled ease using the Light
System DALI.
Light Clients with luminaire ID
When you can see the luminaires,
the mounting locations of Light
Clients are identified simply by
using the “flash” option in the
Light Studio software. However,
this is not always possible for
larger Light System DALI installations. Now, every Light Client
carries an additional sticker with
a unique luminaire ID. This individual luminaire ID allows each
Light Client to be identified both
during commissioning and in the
lighting control software. The
sticker can be removed by the
installer and transferred to the
appropriate place on the reflected
ceiling plan drawing to show the
mounting location of each Light
Client.
www.erco.com
Light System DALI
ERCO Light Studio
The ERCO Light Studio
software is an integral
component of the Light System
DALI and is included with every
Light Server. Although a Light
System DALI may be commissioned for use without a PC, only
the Light Studio can give designers and users full creative control
in the sense of “tune the light”.
With its easy-to-follow graphic
user interface, Light Studio provides many different functions
for setting up and documenting DALI Light Systems and for
using them for scenographic and
energy-efficient architectural
lighting. These functions include
such unique features as the automatic recognition of DALI-compatible ERCO luminaires (Light
Clients) and the display of these
with product names, images and
article numbers, or the interac tive determination of the colour
locus of varychrome luminaires.
A PC installed with ERCO Light
Studio can be connected to the
Light Server or the Light Changer
via a USB port or to the hub via
Ethernet. When connected, the
arrangement and current settings
of the particular Light System
DALI are transferred to the program and displayed there as a project. After completing the system
set up and programming the light
scenes, the PC can then be disconnected from the system; the
day-to-day operation (i.e. recalling light scenes) is performed via
the Light Changer or via pushbuttons. Light Studio consists of
several modules which cover different tasks when working with
a Light System DALI.
Light Master
The primary function
of the Light Master
module is to process and control
light scenes. The Light Clients of
a Light System are displayed as
a list and graphically. Their attributes, such as dimmer settings
or colour locations, can be set
interactively, and there are userfriendly tools such as the colour
wheel, a colour library and a progression library or dynamic progressions especially for controlling varychrome luminaires. Light
Clients can be grouped together
as required and synchronised
with each other. Defined settings
are saved as a light scene. Up to
1024 light scenes can be created
and given plain text names. These
are also displayed on the Light
Changer.
Light Book
The Light Book is used
for the organisation
and spatial structuring of Light
Studio projects. Its main function is to create zones and assign
Light Clients or Light Changers
to zones. It also defines generic
Light Clients for luminaires from
other manufacturers or custombuilt ERCO luminaires and saves
the relevant information in the
DALI control gear of the Light
Clients.
www.erco.com
In 2008, the Light System DALI
will be available with new functions:
1. Connection of a PC to Light
Studio via Ethernet
2. Connection of up to four
switches, movement sensors or
twilight switches for each Light
Server
3. Interface to media technology
via Ethernet
4. Master dimming
5. Configuration of Emanon
projection spotlights with
Goborotators
6. Printout of project data for
documentation
Light Timer
The Timer module allows
light scenes to be recalled
at predefined times. The time and
calendar functions provide great
flexibility for the automation of
scenographic lighting, e.g. to set
the light scenes to shop-opening
times or licensing hours, or to
reduce the lighting level during
night time.
Light Sequencer
The Light Sequencer
is a tool designed specifically for the purpose of defining and storing sequences of light
scenes as a timed progression.
Compared with the dynamic progression in the Light Master, the
Light Sequencer can be used to
create a sequence of scenes without specifying a definite starting
time. This component can then
be used for a variety of events
with different starting times.
The actions and fading times for
each scene transition can be set
individually.
ERCO Program 2008/09
55
Light System DALI
Integrating sensors and media
technology
The four digital inputs on the
Light Server allow an individual
configuration of components
such as movement sensors or twilight switches. The Light System
DALI can thus interact with sensors and automatically recall
scenes. The inputs are conveniently configured using Light
Studio. The Ethernet interface
enables the user to connect to
the media technology or wirelessly program the Light System
DALI using a WLAN router. This
simplifies the set-up of the
scenes and enables the lighting
designer to move around freely
in the room and check the different light settings in the Light
Studio.
The battery free
remote control,
for example, is
useful in conference rooms for
conveniently
recalling different light scenes.
The receiver
receives the signals sent by the
remote control
or the wall transmitter and passes
them on to the
Light System
DALI installation.
The battery free
wall transmitter
with four pushbuttons can also
be subsequently
mounted on any
surface since it
does not require
electrical wiring.
Sensors such as
movement sensors or twilight
switches can be
connected to
the four digital
inputs of the
Light Server and
configured using
the Light Studio
software.
Scalability
DALI protocol limits the number
of addresses in a conventional
DALI system to 64. ERCO Light
System DALI goes beyond this
limit with the Light Server 64+,
which can be networked with
other Light Servers of the same
type through an Ethernet interface. Installations with over
64 addresses can be created by
networking up to twelve Light
Server 64+ units via the integrated Ethernet interfaces. This
allows the management of up
to 768 DALI addresses. The number of connectable Light Changers
multiplies accordingly.
The option of
the networkable
Light Server 64+
makes the Light
System DALI suitable for extensive
systems with differentiated lighting concepts and
dynamic light.
56
ERCO Program 2008/09
www.erco.com
Software
06652.000
Light Studio for Light System DALI
Software for configuring the ERCO
Light System DALI.
Light Studio software for PCs with
Windows 2000, XP, Vista, for configuration of the ERCO Light System DALI.
Creation of 1024 light scenes, 64 colour
progressions and 1024 timed events.
Operation in 6 languages: German,
English, French, Italian, Spanish, Dutch.
The Light Master, Light Book and Light
Timer modules help in designing the
light scenes, the organisation and spatial structuring of projects, and the
recalling of scenes at pre-determined
times.
- Easy-to-follow representation of the
Light Clients.
- Display of product information.
- The symbols for the Light Clients can
be placed anywhere on the stage as a
visual, mnemonic aid.
- Simple adjustment of colours, etc.,
with the help of a colour wheel.
The Light Sequencer module enables
the individual creation of sequences, i.e.
a predefined progression of scenes.
Configuration of Emanon projection
spotlights with Goborotators (2nd
quarter of 2008).
Printout of the project data for documentation (2nd half of 2008).
Output devices
06660.000 White
Light Server 64+ for Light System DALI
Control gear to control up to 64 Light
Clients.
Connection of 31 Light Changers maximum and up to 4 push-button groups.
Realisation of larger Light System DALI
installations possible by using additional interface to network 12 Light
Servers 64+ units to each other.
Control of up to 768 Light Clients,
12x31 Light Changers, 1024 light
scenes in up to 64 zones.
USB connection for configuration with
ERCO Light Studio.
Weight 0.55kg
www.erco.com
DALI controller for connection of up to
64 Light Clients with DALI interface.
The networking of a number of Light
Servers is carried out using Ethernet,
RJ45 connector, Cat5 cabling.
Automatic identification of ERCO Light
Clients and automatic assignment of
RGB colour channels. All required data
is permanently stored, e.g. light scenes,
timer programs, colour progressions,
etc.
Connection of up to 31 Light Changers
for recalling light scenes, timer programs and single-circuit operation.
When connecting more than four Light
Changers, an additional 24V DC power
supply (SELV) is required, e.g. ERCO
06139.
The light scenes, timer programs, colour progressions, etc., are configured
using the ERCO Light Studio Windows
software supplied.
The Light Master, Light Book and Light
Timer modules help in designing the
light scenes, the organisation and spatial structuring of projects, and the
recalling of scenes at predefined times.
- Easy-to-follow representation of the
Light Clients.
- Display of product information.
- The symbols for the Light Clients can
be placed anywhere on the stage as a
visual, mnemonic aid.
- Simple adjustment of colours, etc.,
with the help of a colour wheel.
The Light Sequencer module enables
the individual creation of sequences, i.e.
a predefined progression of scenes.
The PC is connected via the Light
Server’s USB interface with a USB A-B
or a USB A-mini B cable. A USB Amini B cable is included in the delivery.
4 digital inputs with individually configurable functions of:
- up to 4 push-button groups for the
recall of scenes or sequences
- master dimming (from 2nd quarter of
2008)
- up to 4 switches, movement sensors
or twilight sensors (from 2nd quarter of
2008)
Other features in the 2nd half of 2008
- Interface to media technology via
Ethernet.
- Connection of a PC with Light Studio
via Ethernet.
ERCO Program 2008/09
57
Manual input devices
Control panel for recalling 32 light
scenes, single-circuit operation and the
On/Off, master dimming and timer on/
off functions.
Graphic LC display with touch screen,
sensor button ON/OFF.
Cavity wall box, plastic.
Control panel for recalling 32 light
scenes, single-circuit operation and the
On/Off, master dimming and timer on/
off functions.
Graphic LC display with touch screen,
sensor button ON/OFF.
Cavity wall box, plastic.
06651.000 White
Light Changer for Light System DALI
Control panel for recalling light scenes
and timer programs, single-circuit operation, On/Off and master dimming
functions.
Weight 0.18kg
Control panel for recalling 32 light
scenes, single-circuit operation and the
On/Off, master dimming and timer on/
off functions.
Graphic LC display with touch screen,
sensor button ON/OFF.
Cavity wall box, plastic.
06655.000 Silver
Light Changer for Light System DALI
Control panel for recalling light scenes
and timer programs, single-circuit operation, On/Off and master dimming
functions.
Weight 0.18kg
06656.000 Graphit
Light Changer for Light System DALI
Control panel for recalling light scenes
and timer programs, single-circuit operation, On/Off and master dimming
functions.
Weight 0.18kg
58
ERCO Program 2008/09
www.erco.com
Manual input devices
Transmitter for battery free remote
control on the interference-free
868MHz frequency. Maintenance-free.
Range of 30m with 2 brick walls. Max.
30 transmitters on one receiver.
06658.000
4-channel remote control for Light System DALI
Transmitter with 4 push-buttons for the
recall of light scenes.
Weight 0.05kg
Receiver for remote control.
06659.000
2-channel receiver for Light System
DALI
Receiver with 2 DALI push-button functions, for switching light scenes.
Weight 0.04kg
Transmitter for battery free remote
control on the interference-free
868MHz frequency. Maintenance-free.
Range of 30m with 2 brick walls. Max.
30 transmitters on one receiver.
2 rocker switches. Combi frame. Other
combi frames to be ordered separately.
www.peha.de.
06665.000 White
4-channel wall transmitter for Light
System DALI
Transmitter with 4 push-buttons for the
recall of light scenes.
Weight 0.06kg
Transmitter for battery free remote
control on the interference-free
868MHz frequency. Maintenance-free.
Range of 30m with 2 brick walls. Max.
30 transmitters on one receiver.
2 rocker switches. Combi frame. Other
combi frames to be ordered separately.
www.peha.de.
06666.000 Graphit
4-channel wall transmitter for Light
System DALI
Transmitter with 4 push-buttons for the
recall of light scenes.
Weight 0.06kg
www.erco.com
ERCO Program 2008/09
59
Manual input devices
Transmitter for battery free remote
control on the interference-free
868MHz frequency. Maintenance-free.
Range of 30m with 2 brick walls. Max.
30 transmitters on one receiver.
2 rocker switches. Combi frame. Other
combi frames to be ordered separately.
www.peha.de.
06667.000 Silver
4-channel wall transmitter for Light
System DALI
Transmitter with 4 push-buttons for the
recall of light scenes.
Weight 0.06kg
83817.000
DALI transformer EN 61347
230/240/12V, 50-60Hz. 20-105W at
max 60°C ambient temperature.
Secondary voltage 11.8V.
Installation in ceiling voids, showcases,
furniture.
Plastic housing. Primary and secondary
cable clamps and terminal blocks.
Short-circuit protection: electronic cutout, reconnect once short-circuit is
cleared.
Overload and overheat protection:
automatic load-sensing. For interference suppression to VDE 0875, part 2,
secondary conductor length 2m max.
For ceiling aperture ø 80mm, recessed
depth 90mm
83829.000
DALI dimmer 1000W
for ohmic loads, conventional and electronic transformers. Mounting on DIN
rail.
83816.000
DALI switch actuator, double, 16A
Weight 0.21kg
Two voltage-free contacts for switching
ohmic, inductive and capacitive loads
max 16A.
DALI interface with two independent
addresses. Mounting on DIN rail.
Electrical accessories
83814.000
DALI analogue converter 230V ± 10%,
5A
Weight 0.22kg
For connection of luminaires with ECG
1-10V to Light System DALI.
Conversion of a DALI signal into a
1-10V signal.
Internal relay for inductive loads of
max. 5A. Mounting on DIN rail.
72
Mechanical accessories
40
72
06653.000
Plaster frame for
Light System DALI
Weight 0.22kg
Plaster frame for
the installation of
Light Changers in
cavity walls or for
flush installation.
06657.000
Housing for Light System DALI
Weight 0.19kg
Recessed housing for the installation of
Light Changer.
60
ERCO Program 2008/09
www.erco.com
LON Area Net
Public services
administration
building, Lüdenscheid. Architect:
HPP Hentrich,
Petschnigg &
Partner, Düsseldorf. Lighting
design: Ingenieurgesellschaft Dr.
A. Henne mbH,
Siegen.
ERCO Area Net, the system for
light management and scenic
dimming, is a convenient tool for
dynamic lighting design. Area Net
can be used to interpret architecture to suit different requirementswhether aesthetic or practical, Area
Net can create the optimum lighting effect for each individual case.
Area Net integrates into the networked building technology as
a modular-based individual system with decentralised control
panels which control the lighting of a whole building and can
be linked up with sensors, other
equipment and data networks. The
system components have their own
microprocessor with an integrated
interface. Identified by individual
addresses, all com-ponents can
communicate with one another
using a common line, which simplifies the installation considerably.
The speed and dependability of the
bus protocol is ideal for high quality lighting control applications.
Sensors enable the interaction
between Area Net and its environment. This means that the daylight
sensors automatically maintain
the lighting level even with fluctuating levels of daylight, saving
energy. In addition, different light
scenes can be recalled to suit the
external lighting conditions. The
connections for presence sensors
and switches complete the product
range.
www.erco.com
ERCO Program 2008/09
61
LON Area Net
Input devices
Programming, configuration and
operation of Area Net is carried
out via the Control Pad or a Preset.
From this point the output modules are addressed. They recall the
relevant parameters for the requested light scene from their memory
banks and control the connected circuits as required. Parallel to
the Preset, four programmed light
scenes can be recalled and can be
regulated in their total brightness
through the master control function via extensions, or via an IR
remote control. An IR receiver is
integrated in the Control Pad or
the Preset. Sensors for the indoor
and outdoor areas enable automatic input for the daylight control. A sequence module is available
Output devices
Output modules for a maximum of
4 or 8 connections are available to
control external dimmers or relays
for luminaires, electric blinds and
projection screens.
Interfaces
A PC interface is available to connect the Preset to a bus connector.
62
ERCO Program 2008/09
to automatically recall light scenes
in sequential order.
www.erco.com
LON Area Net
Control gear units
The supply of power to the Presets, nology control ohmic and inductive
extensions, D/A modules etc. is
loads as well as electronic transensured by the control gear units. If formers.
necessary, several power packs can
be connected in parallel. Dimmers
in leading and trailing edge tech-
Sets
The set serves as a lighting control
system for one area with 32 light
scenes and 8 circuits. It consists
of a Preset with built-in infrared
receiver, the relevant housing, a
Accessories
Area Net can be easily programmed, configured and
documented with the PC Preset
software for Windows.
D/A module (as the output device)
and the power supply.
ERCO’s LON-based
lighting control
technology
manages over
700 circuits in
the Stuttgart
Art Museum.
Architects:
Hascher Jehle und
Assoziierte GmbH,
Berlin. Lighting
design: Peter
Andres, Hamburg;
ibb Burrer &
Deuring Ingenieurbüro GmbH,
Ludwigsburg.
www.erco.com
ERCO Program 2008/09
63
Manual input devices for recessed wall installation
For the configuration, programming
and operation of max. 32 light scenes,
ON/OFF and master control. Integral IR
receiver, single-circuit operation and
blind control.
06100.000
Preset for Area Net
Control panel for the configuration,
programming and operation (recall of
max. 32 light scenes)
Weight 0.96kg
Recall of 4 light scenes, ON/OFF and
master control. LEDs identify the
selected light scene. For instance,
when using, with a Preset Area Net
06100.000 in one room, the 4 light
scenes are recalled which are currently
displayed on the Preset.
06101.000
Extension for Area Net
Control panel for the recall of 4 light
scenes
Weight 0.32kg
Manual input device for recessed ceiling installation
X
4 programmed light scenes, the ON/OFF
functions and master dimming function
can be recalled with the IR receiver via
the IR remote control 06105.000. For
instance, when using, with a Preset
Area Net 06100.000 in one room, the
4 light scenes can be recalled which are
currently displayed on the Preset.
06106.000
IR receiver for Area Net
IR receiver for remote control
06105.000
Weight 0.12kg
64
ERCO Program 2008/09
www.erco.com
Manual input device Remote control
IR remote control for the recall of
4 light scenes, ON/OFF and master control. Only those 4 light scenes are to be
recalled which are shown on the display
of the Preset. The required block battery
(6F22) is not included.
06105.000
IR remote control for Area Net,
Professional Net
Control panel for the recall of 4 light
scenes
Weight 0.12kg
Manual input devices for installation in distribution boxes
Recall of 4 light scenes, ON/OFF and
master control. 8 inputs for the connection of potential-free push-buttons.
8 outputs to confirm the selected function. An optional function automatically switches a light scene off after a
prescribed time period.
06112.000
Key control for Area Net
Control panel for recalling light scenes
via external potential-free push-buttons
Weight 0.40kg
The switch trigger is used to connect
commercially available switches or
movement sensors with potential-free
switch contacts. The recall of defined
light scenes and the OFF function, and/
or the function of two defined light
scenes is possible in up to 8 rooms. A
switch and/or input of the switch trigger is assigned to every room.
06113.000
Switch trigger for Area Net
Control panel for recalling a defined
light scene via potential-free switches
or movement sensors
Weight 0.40kg
www.erco.com
ERCO Program 2008/09
65
Manual input devices for installation in distribution boxes
The 4x key control allows 2 programmed light scenes for up to 4 rooms
to be recalled via external pushbuttons. 8 inputs for the connection of
potential-free push-buttons. 8 outputs
to confirm the selected function.
06124.000
4x key control for Area Net
Control panel for recalling two light
scenes in up to 4 rooms via external
push-buttons
Weight 0.40kg
Automatic input devices for installation in distribution boxes
06110.000
Daylight control with indoor sensor for
Area Net
Control panel for maintaining up to
32 lighting levels constant in one room
Weight 0.41kg
The daylight control with internal
sensor maintains constant illuminance
within a room. The set value can be a
default value or can be variably selected. Variably means that the present
light situation (illuminance) is taken as
being the new set value. Default means
that the set values measured with a
luxmeter during the course of programming are used when a light scene
is recalled. The default set values are
permanently saved in the device. The
daylight control features an input for
connecting a potential-free switch with
which the function for maintaining
constant illuminance can be temporarily switched off.
The daylight control with external
sensor is used to automatically recall
light scenes depending on the external
brightness. The device features an input
for connecting a potential-free pushbutton to switch the control on and off.
06111.000
Daylight control with outdoor sensor
for Area Net
Control panel for automatic recall of
light scenes dependant on daylight
conditions
Weight 0.43kg
66
ERCO Program 2008/09
www.erco.com
Automatic input devices for installation in distribution boxes
The sequence module is used for the
automatic and sequential recalling of
max. 32 light scenes. The time interval
between light scenes is adjustable. The
sequence is started or stopped by an
operating device or via external pushbuttons / switches.
06114.000
Sequence module for Area Net
Control panel for the automatic
sequential recall of up to 32 light
scenes
Weight 0.40kg
The partition interconnector is used
for functionally connecting up to six
rooms. The device uses potential-free
switches to detect when the partitioning walls are opened. The switch positions recognised by the device can be
displayed via the acknowledgement
outputs. An additional switch can be
connected to deactivate the device.
06165.000
Partition interconnector for Area Net
For the interconnection of up to six
rooms
Weight 0.40kg
Output device for installation in distribution boxes
The D/A module is an output device
with 8 channels. Each channel contains
one analogue output and one switch
output. The D/A module allows the connection of: external dimmers 0V-10V,
electronic control gear or other devices
with 1V-10V (current sink), power relay
for controlling non-dimmable luminaires, electric blinds and projection
screens. For saving and calling up light
scenes as well as light scene names
and all necessary parameters. Saves the
switch-on period / switch-on frequency
of every circuit. Recall via separate software (PC Preset).
06120.000
D/A module for Area Net
8x output module for connecting
external dimmers, for directly controlling dimmable ECG or transformers.
Weight 0.40kg
www.erco.com
ERCO Program 2008/09
67
Output device for installation in distribution boxes
The electric blind control is an output
device for controlling up to 4 electric
blinds or projection screens via external
relays (e.g. ERCO 06209.000). The outputs for each electric blind are mutually
interlocked using software.
06121.000
Electric control blind for Area Net
Output module for controlling up to
4 electric blind groups
Weight 0.39kg
Interface
With the PC interface (RS232) and a
PC or media control, light scenes can
be recalled and the ON/OFF and master
control functions used.
06153.000
PC interface (RS232) for Area Net
PC interface for the recall of light
scenes via devices with serial interface
(RS232)
Weight 0.35kg
Software (CD ROM) for configuration
and programming, recall of light scenes,
single-circuit operation, ON/OFF and
master control. Additional timer and
sequence control.
PC interface (RS232) for connecting
ERCO Area Net to a PC.
Operation via a multi-media system
is possible. Current commands can be
made available.
06156.000
PC Preset for Area Net
Software for programming and recall of
light scenes incl. PC interface (RS232)
Weight 0.35kg
68
ERCO Program 2008/09
www.erco.com
Gateway
Software (CD ROM) for configuration
and programming, recall of light scenes,
single-circuit operation, ON/OFF and
master control. Additional timer and
sequence control.
Gateway with RJ45 socket for connecting ERCO Area Net to IT networks.
Operation via a multi-media system
is possible. Current commands can be
made available.
06159.000
PC Preset for Area Net
Software for programming and recall of
light scenes incl. Gateway (TCP/IP).
Weight 0.35kg
Power supplies
Power supply for supplying Presets,
Extensions, D/A modules etc. If necessary, several power supplies can be connected in parallel.
06139.000
Power supply 36VA, 24V DC for Area
Net and Professional Net
Power supply 36VA, 24V DC
Weight 0.20kg
Power supply for supplying of Presets,
extensions, D/A modules etc. If 120VA
of power is insufficient, then up to
three power supplies can be connected
in parallel.
06142.000
Power supply 120VA, 24V DC for Area
Net and Professional Net
Power supply 120VA, 24V DC
Weight 0.75kg
www.erco.com
ERCO Program 2008/09
69
Dimmer
Dimmer for controlling incandescent
lamps, tungsten halogen lamps, lowvoltage halogen lamps with conventional (wire-wound) transformer and
fluorescent lamps. Control via external
0V-10V control voltage or 10kO linear
potentiometers or push-buttons.
06203.000
Dimmer LE, 5500VA for Area Net and
Professional Net
Dimmer (leading edge), 5500VA
Weight 2.80kg
Dimmer for controlling incandescent
lamps, tungsten halogen lamps, lowvoltage halogen lamps with conventional (wire-wound) transformer and
fluorescent lamps. Control via external
0V-10V control voltage or 10kO linear
potentiometers.
06204.000
Dimmer LE, 1400VA for Area Net and
Professional Net
Dimmer (leading edge), 1400VA
Weight 0.56kg
Dimmer for controlling incandescent
lamps, tungsten halogen lamps, lowvoltage halogen lamps with conventional transformer and fluorescent
lamps. Control via external 0V-10V
control voltage or 10kO linear potentiometers.
06205.000
Dimmer LE, 3000VA for Area Net and
Professional Net
Dimmer (leading edge), 3000VA
Weight 1.40kg
Dimmer in trailing edge technology for
controlling incandescent lamps, tungsten halogen lamps and low-voltage
halogen lamps with electronic transformer. Control via external 0V-10V
control voltage or linear potentiometers.
06213.000
Dimmer TE, 1200VA for Area Net and
Professional Net
Dimmer (trailing edge), 1200VA
Weight 0.46kg
70
ERCO Program 2008/09
www.erco.com
Dimmer
Dimmer in trailing edge technology for
controlling incandescent lamps and
electronic transformers for low-voltage
halogen lamps.
Control via external control voltage
1V-10V (current sink) 470kO potentiometer, preferred logarithmic.
Incandescent or tungsten halogen
lamps: 60-500W
06215.000
Dimmer TE, 750VA for Area Net and
Professional Net
Dimmer (trailing edge), 750VA
Weight 0.24kg
Dimmer in trailing edge technology for
controlling incandescent lamps, tungsten halogen lamps and low-voltage
halogen lamps with electronic transformer. Control via external 0V-10V
control voltage or linear potentiometers.
06217.000
Dimmer TE, 2300VA for Area Net and
Professional Net
Dimmer (trailing edge), 2300VA
Weight 1.00kg
Relay
For direct connection to the switch outputs of the D/A or S/D/A module or
electric blind control (control voltage
24V DC). For switching luminaire groups
and dimmers, 10A ohmic load.
06209.000
Power relay for Area Net and
Professional Net
Power relay 10A ohmic load
Weight 0.07kg
www.erco.com
ERCO Program 2008/09
71
Set
06300.000
Local System Set
Consisting of: Preset Local System,
housing, D/A module and power supply
Weight 2.03kg
Lighting control for a room with
32 light scenes and 8 circuits
(expandable to 16 circuits), consisting
of:
Preset Local System
For the configuration, programming
and operation of max. 32 light scenes,
ON/OFF and master control. Integral IR
receiver, single-circuit operation, blind
control.
Housing/recessed mounted wall housing
For mounting Presets in cavity walls
and for flush installation.
D/A module
8x output module for connecting
external dimmers, for directly controlling dimmable ECG or transformers.
36VA power supply
For supplying the Local System. For
mounting on DIN rail. For installation in
standard distribution boxes.
Electrical accessories
06146.000
Bus terminating resistor for Area Net,
Professional Net
Bus terminating resistor with integrated
bus connection socket.
Weight 0.05kg
Allows connection of PC interface (e. g.
06153.000, 06553.000 or 06156.000,
06556.000), the terminating resistance setting and bus line through-wiring. The bus terminating resistance is
provided within a housing for mounting
on DIN rail.
06154.000
Bus connection socket for Area Net,
Professional Net
Bus connection socket for PC interface
(RS232)
Weight 0.12kg
The bus connection socket is required
for connecting the PC interface (RS232)
(e.g. 06153.000/06553.000).
X
X
Mechanical accessories
06151.000
Recessed housing, extension for Area
Net, Professional Net
Recessed wall housing for recessed
mounting in walls for extensions
Weight 0.27kg
Recessed housings are for the installation of Presets in cavity walls and for
flush installation.
72
06152.000
Recessed housing, Preset for Area Net,
Professional Net
Recessed housing for Presets
Weight 0.47kg
Recessed housings are for mounting
Presets in cavity walls and for flush
installation.
ERCO Program 2008/09
www.erco.com
Software
06122.000
D/A-Save for Area
Net
Software for saving data
The software D/A
Save is a facility
with which the
memory of the
Local System/Area
Net output modules can be read,
written, and saved
onto other data
medium. The different versions of
the output modules used allow
various copying
options.
Supplied on CDROM.
06162.000
CE Light Pad for
Area Net
Software for operation with pocket
PCs
Software CE Light
Pad for Pocket PCs
with Windows CE
3.0 for recalling
16 light scenes
and the OFF function.
06190.000
PC Light Pad for
Area Net
Software for operation with PCs
Software for PCs
to recall programmed light
scenes, controlling blinds, ON/
OFF and dimming
functions.
Teatteri Ravintola,
Helsinki. Architect/
lighting design:
Rupert Gardner,
Stockholm.
www.erco.com
ERCO Program 2008/09
73
Light in the indoor area
Luminaires designed to add scenic
lighting to architecture are more
accurately described as lighting
instruments. They are the result
of intense reflection on the issues
of lighting engineering. ERCO’s
range of indoor luminaires embraces a wide spectrum of different lighting tools: spotlights and
downlights, track, light structures,
task lights, directive luminaires,
ceiling washlights and floor washlights. The common features that
they share are the high quality
constructional precision and
visual comfort.
Top:
Museum Ara Pacis,
Rome. Architect:
Richard Meier,
New York. Lighting design: Fisher
Marantz Stone,
New York.
Yoko Yap shoe
store, Gothenburg. Architect:
Vasilis arkitekt
Design, Västra
Frölunda.
74
ERCO Program 2008/09
www.erco.com
Light in the indoor area
Hotel Emirates
Palace, Abu Dhabi.
Architect: Wimber ly Allison Tong
& Goo. Lighting
design, indoor
area: DHA Design
& Lighting Design
International,
London. Lighting
design, outdoor
area: DHA Design,
London.
Company Fashion
Shop, Antwerp.
Architect: Claire
Bataille & Paul
Ibens, Antwerp.
Diesel, Spring
Street, Soho, New
York. Architect:
Diesel interior
Design Department, Molvena.
Rembrandt Exhibition, Kulturforum Staatliche
Museen zu Berlin
(Berlin State Museums). Architecture/lighting
design: Hansjörg
Hartung, Berlin;
Staatliche Museen
zu Berlin.
www.erco.com
ERCO Program 2008/09
75
Track and light structures
No invention since the incandescent
lamp has created such a revolution in
lighting design as the track. The track
effectively liberates light and luminaires
from the constraints of rigid mounting. It forms the basis for variable, flexible lighting design that can be adapted to the changing style and use of a
space. A comprehensive range of accessories allows the track to be connected
in a linear sequence, or for right-angle
shapes to be constructed. Light structures combine the benefits of fixed and
movable luminaires.
They typically feature a modular design
that enables the construction of countless structural variations - ranging from
single-dimensional linear arrangements
to two-dimensional networked grids all using standardised basic and connector components.
ERCO track
81
Hi-trac track and light structure
98
99
100
106
107
108
108
115
115
116
117
T16 light structure
Monopoll track and light structure
76
ERCO Program 2008/09
www.erco.com
ERCO track
No invention since the incandescent lamp has created such a
revolution in lighting design as
the track. The track effectively liberates light and luminaires from
the constraints of rigid mounting
and allows lighting designers additional freedom to meet any specific
lighting requirement. Luminaires
in different shapes and with different photometric characteristics
can be installed on track, to suit
the specific lighting requirements.
If the room interior or function
changes, the luminaires can easily
be replaced or moved on the track.
The classic ERCO track with a crosssection of 33.5 x 34mm is primarily designed for mounting on ceilings or walls, whereas the flanged
track is designed for suspended
ceilings or flush mounted using a
plaster trim profile. Individual track
lengths of up to 4 metres can be
butted together or formed into
rectangular shapes. Flexible connectors are available to create more
complex configurations.
In the standard form, the ERCO
track is operated in 3-circuit
installations. When using the
ERCO track in a DALI application,
the same conductors are used
but are connected differently:
only one conductor carries the
supply voltage, the other two
conductors are used for the control
signal. Spotlights fitted with
DALI adapters are designed for
mechanical and electrical as well
as for bus connection. Special DALI
www.erco.com
"Abpfiff! Faces of
Football" exhibition, Mathias
Braschler and
Monika Fischer.
c/o Berlin at the
central post office
building, Oranienburger Straße,
Berlin. Architect:
Ingo Pott, Berlin.
accessories ensure that the track
can be correctly and safely wired.
This arrangement ensures the
optimum logistics and availability
of DALI track systems. It also means
that existing track installations can
be economically retrofitted with
ERCO DALI technology.
ERCO Program 2008/09
77
ERCO track
The ERCO track is formed of
extruded aluminium profile, with
white or black powder-coating or
silver anodised. A large number of
connectors are available. Almost
all connectors can be used for
electrical power supply. When
selecting connectors and live ends,
the position of the earth conductor
is critical. Earth conductors must
be continuous throughout the
planned layout. The profile has
stamped knock-outs to mount
the track to ceilings or walls. The
track can also be suspended using
pendant tubes or wire ropes.
Track
ERCO 3-circuit track is available
in lengths up to 4m. When connected to a three-phase network,
each of the three circuits can be
loaded to a maximum of 16A. The
circuits must be separately protected. In the DALI version, one conductor carries the phase and the
two others are used for the information signal. All the connectors for
3-circuit installation or for DALI
applications are available for making the electrical connection.
Application
For a flexible power supply to spotlights, floodlights and wallwashers
and for accent lighting and washlighting in all professional lighting
situations.
Flanged track
ERCO 3-circuit track is available as
flanged track in 3m lengths. The
profile’s flanged sides can be used
as a surface on which to place ceiling panels. When connected to a
three-phase network, each of the
three circuits can be loaded to a
maximum of 16A. The circuits must
be separately protected. In the DALI
version, one conductor carries the
phase and the two others are used
for the information signal. All the
connectors for 3-circuit installation
or for DALI applications are available for making the electrical connection.
Application
For a flexible power supply to spotlights, floodlights and wallwashers
and for accent lighting and washlighting in all professional lighting
situations.
78
ERCO Program 2008/09
www.erco.com
ERCO track
The earth conductor in ERCO track
systems is set in the lower profile
edge. When selecting live end, L- and
T-connectors, it must be ensured that
the continuous line is not interrupted.
The position of the earth conductor is
established by the orientation of the
track system.
Definitions
Live end
Earth conductor left: when looking
up into the track towards the live end,
the earth conductor is on the left.
Earth conductor right: when looking
up into the track towards the live end,
the earth conductor is on the right.
T-connector
Earth conductor left: the earth conductor is on the left when looking
across the T towards the leg.
Earth conductor right: the earth
conductor is on the right when looking across the T towards the leg.
The earth conductor is always positioned on the outside of the T-bar.
To begin with, all track and connectors should be drawn without earth
conductor.
Live end
Earth conductor
left
Earth conductor
right
L-connector
Earth conductor
inside
L-connector
Earth conductor
outside
T-connector
Earth conductor
left
T-connector
Earth conductor
right
X-connector
79307.000 outside
79309.000 left
79309.000 left
79308
79308.000
right
79310.000
79308.000 right
79307.000 outside
79309.000 left
79307.000 outside
79301.000 left
Starting from a T-connector, the
earth conductor should be drawn as
a continuous line.
All connectors shown in this catalogue are marked according to the
above definitions of earth conductor
left and right.
Mechanical information
Horizontal ceiling mounting:
All luminaires that are approved for
the ERCO track system can be used.
Horizontal mounting on walls:
ERCO 3-circuit adapter and DALI
adapter: Only luminaires weighing
up to a maximum of 2kg may be
used.
ERCO transadapter and DALI transadapter: Only luminaires weighing up
to a maximum of 1kg may be used.
Vertical mounting on walls:
The guide groove on the track profile
must be facing to the right.
ERCO 3-circuit adapter and DALI
adapter: The luminaires must not
weigh more than 3.5kg.
ERCO transadapter and DALI transadapter: The luminaires must not
weigh more than 1kg max.
Other mounting positions:
If using luminaires mounted at an
angle, please contact us for advice.
Permissible loading is calculated
from the max. permissible profile
deflection and the max. permissible
mechanical loading of the suspension devices. Load distribution takes
both the weight of the system and
the equally distributed point loads
into consideration.
L
f
e
F
F
F
F
D
e
1
2
(mm) length
(mm) deflection due to weight
of profile
(kg) max. loading of suspension device
(kg) weight of the profile
(kg) maximum permissible load
for two-point suspension
and permissible deflection
(L/250) of 4mm per metre
length
(kg) maximum permissible load
for series suspension and
permissible deflection
(L/250) of 4mm per metre
length
ERCO track
L (mm) 1000
F (kg) 1.1
f (mm) 0.07
2000 3000 4000
2.2
3.3
4.4
1.09 5.50 17.40
F
F
F
11
11
e
e
D
1
2
= 20 kg
(kg) 39
(kg) 19
3
3
—
—
FD
FD
L
F1
FD
FD
L
F2
F2
20kg
20kg
2m
311kg
20kg
20kg
1m
3 19kg
www.erco.com
FD
L
ERCO Program 2008/09
20kg
1m
319kg
79
ERCO track
ERCO track for
3-circuit installation
2
3
1
N
ERCO track is designed for use in a
variety of electrical installations. The
same track profile is wired for either
conventional 3-circuit, 1-circuit and
for DALI installations.
Whereas in conventional 3-circuit
installations all conductors are connected to the network and are individually protected by 3x16A circuit
breakers, in the DALI installation only
one circuit (1x16A) is required for
supplying the mains voltage to the
Light Client. The two remaining copper conductors are used as DALI data
lines.
All connector parts for the electrical connection are available either
for 3-circuit or for DALI installations.
The various different applications
or connection types are indicated
on the articles themselves. Furthermore, every single piece of track in
the DALI installation should be identified as DALI track using the clips
provided.
1
2
3
N
PE
ERCO flanged
track for
3-circuit installation
Circuit 1
Circuit 2
Circuit 3
Neutral conductor
Earth conductor
2
3
PE
Circuit 1
Circuit 2
Circuit 3
Neutral conductor
Earth conductor
DA
DA
1
N
PE
DALI data line
DALI data line
Circuit
Neutral conductor
Earth conductor
PE
ERCO track for
DALI installation
DA
1
1
N
1
2
3
N
PE
DA
N
DA
DA
1
N
PE
DALI data line
DALI data line
Circuit
Neutral conductor
Earth conductor
ERCO flanged
track for
DALI installation
DA
1
PE
DA
N
PE
When installing the 3-circuit adapter,
the lever on the left is firstly locked
in order to make the mechanical connection in the track, and then one
of the three circuits is selected with
the rotatable circuit selector switch.
When inserting the DALI adapter,
the left contact lever first locks it in
place and then the necessary contacts in the track are made by turning the DALI switch.
3-circuit adapter
Trans adapters in
various shapes
and sizes
DALI adapter
DALI transadapters in
various shapes
and sizes
With the 3-circuit adapter the
actual usage is predetermined by
selecting the circuit, while with the
DALI adapter the voltage is permanently applied. It is the DALI signal
that first triggers an action, e.g.
switching on a luminaire.
Spotlights for mains voltage lamps
are fitted with 3-circuit adapters;
transformers or control gear for fluorescent or high-intensity discharge
lamps are frequently built into the
transadapters. The various shapes
and sizes depend on the dimensions
of the internal equipment.
Where spotlights with DALI adapters
are concerned, the DALI transformers
or the DALI control gear are located
either in the luminaires themselves
or in a DALI transadapter.
Every Light Client with DALI adapter
or DALI transadapter is specially
equipped to protect against over voltage caused by running three circuits
on one conductor.
3-circuit adapter
DALI adapter
80
ERCO Program 2008/09
www.erco.com
ERCO track
4 isolated copper conductors and
pressed-in earth conductor.
When used as DALI track: one 16A circuit and two conductors for connecting
to the DALI data line.
When used as a 3-circuit track: three
separately switchable circuits 16A each.
The ERCO track system is approved to
IEC 60570 (EN 60570/VDE 0711 part
300).
Mounting surface with easy to remove
knockouts at 0.4m intervals.
Accessories page 83
0q
78341.000 White (RAL9002)
78361.000 Black
Aluminium profile, powder-coated.
Weight 1.10kg
78301.000 Silver
Aluminium profile, anodised.
Weight 1.10kg
0q
78342.000 White (RAL9002)
78362.000 Black
Aluminium profile, powder-coated.
Weight 2.20kg
78302.000 Silver
Aluminium profile, anodised.
Weight 2.20kg
0q
78343.000 White (RAL9002)
78363.000 Black
Aluminium profile, powder-coated.
Weight 3.30kg
78303.000 Silver
Aluminium profile, anodised.
Weight 3.30kg
0q
78344.000 White (RAL9002)
78364.000 Black
Aluminium profile, powder-coated.
Weight 4.40kg
78304.000 Silver
Aluminium profile, anodised.
Weight 4.40kg
0q
www.erco.com
0q
0q
0q
ERCO Program 2008/09
81
ERCO track
$!,)
SIDI trade fair
stand at the
Orgatec 2006,
Cologne. Architect: Stefano
Colli, Barcelona.
Lighting design:
Stefano Colli, SIDI
team.
82
ERCO Program 2008/09
www.erco.com
ERCO track DALI installation: connectors
79302.000 White
79322.000 Black
End plate
Plastic.
0q
0q
79207.000 White
79227.000 Black
DALI
DALI L-connector
Plastic.
Earth conductor outside. Feeding possible. Through-wiring.
0q
79208.000 White
79228.000 Black
DALI
DALI T-connector
Plastic.
Earth conductor, right. Feeding possible.
Through-wiring.
0q
79209.000 White
79229.000 Black
DALI
DALI T-connector
Plastic.
Earth conductor, left. Feeding possible.
Through-wiring.
0q
79210.000 White
79230.000 Black
DALI
DALI X-connector
Plastic.
Feeding possible. Through-wiring.
0q
79206.000 White
79226.000 Black
DALI
DALI L-connector
Plastic.
Earth conductor inside. Feeding possible. Through-wiring.
www.erco.com
79204.000 White
79224.000 Black
DALI
DALI coupler
Plastic.
Feeding possible. Through-wiring.
0q
0q
79201.000 White
79221.000 Black
DALI
DALI live end
Plastic.
Earth conductor, left.
0q
79200.000 White
79220.000 Black
DALI
DALI live end
Plastic.
Earth conductor, right.
79211.000 White
79231.000 Black
DALI
DALI Multiflex coupler
Plastic.
Feeding possible. Through-wiring.
0q
79315.000 White
79335.000 Black
Coupler
for flush connection of ERCO track.
Plastic.
0q
ERCO Program 2008/09
83
ERCO track DALI installation: electrical accessories
79047.000 White
79048.000 Black
DALI
ERCO DALI
adapter
For 250V, 10A
pendant luminaire, with strain
relief. Plastic.
Connection cable
5x0,75mm²,
L 1500mm.
Weight 0.39kg
79094.000 White
79095.000 Black
DALI
DALI singlet
Recessed mounting/cast into concrete.
For spotlights with ERCO DALI adapter,
250V, 6A.
Plastic. Strain relief.
Mechanical Load:
Ceiling mounting 8.00kg.
Wall mounting 3.50kg.
Weight 0.32kg
0q
79092.000 White
79093.000 Black
DALI
DALI singlet
Surface mounting. For spotlights with
ERCO DALI adapter, 250V, 6A.
Plastic. Strain relief.
Mechanical Load:
Ceiling mounting 8.00kg.
Wall mounting 3.50kg.
Weight 0.13kg
12693.000 White
5x1,5mm²
12691.000 Black
5x1,5mm²
Spiral cable
L 500/2,500mm.
0q
ERCO track 3-circuit installation: connectors
79302.000 White
79322.000 Black
End plate
Plastic.
0q
79308.000 White
79328.000 Black
3-circuit T-connector
Plastic.
Earth conductor, right. Feeding possible.
Through-wiring.
0q
79309.000 White
79329.000 Black
3-circuit T-connector
Plastic.
Earth conductor, left. Feeding possible.
Through-wiring.
0q
84
79307.000 White
79327.000 Black
3-circuit L-connector
Plastic.
Earth conductor outside. Feeding possible. Through-wiring.
79310.000 White
79330.000 Black
3-circuit X-connector
Plastic.
Feeding possible. Through-wiring.
0q
0q
79306.000 White
79326.000 Black
3-circuit L-connector
Plastic.
Earth conductor inside. Feeding possible. Through-wiring.
79304.000 White
79324.000 Black
3-circuit coupler
Plastic.
Feeding possible. Through-wiring.
0q
0q
0q
79301.000 White
79321.000 Black
3-circuit live end
Plastic.
Earth conductor, left.
0q
79300.000 White
79320.000 Black
3-circuit live end
Plastic.
Earth conductor, right.
79311.000 White
79331.000 Black
3-circuit Multiflex coupler
Plastic.
Feeding possible. Through-wiring.
0q
ERCO Program 2008/09
79315.000 White
79335.000 Black
Coupler
for flush connection of ERCO track.
Plastic.
0q
www.erco.com
ERCO track 3-circuit installation: electrical accessories
79023.000 White
79024.000 Black
ERCO 3-circuit
adapter
With earthed
socket outlet.
250V, 10A.
Plastic. Cover:
plastic, black.
L 71mm, B 56mm,
H 90mm.
79031.000 White
79030.000 Black
ERCO 3-circuit
adapter
Installation kit
for 250V, 10A
pendant luminaire, with strain
relief. Plastic.
Connection cable
3 x 0.75mm,
L 1500mm.
Individual parts to
be assembled onsite.
Weight 0.15kg
79055.000 White
79054.000 Black
ERCO 3-circuit
adapter
For pendant luminaire, 250V, 10A,
with hook and
terminal block.
Plastic.
Load: 10kg.
L 71mm, B 32mm,
H 33mm.
79037.000 White
79036.000 Black
1-circuit singlet
Recessed mounting/cast into concrete. For spotlights with ERCO 3-circuit
adapter, 250V, 6A.
Plastic. Strain relief.
Mechanical Load:
Ceiling mounting 8.00kg.
Wall mounting 3.50kg.
Weight 0.32kg
0q
79039.000 White
79038.000 Black
1-circuit singlet
Surface mounting. For spotlights with
ERCO 3-circuit adapter, 250V, 6A.
Plastic. Strain relief.
Mechanical Load:
Ceiling mounting 8.00kg.
Wall mounting 3.50kg.
Weight 0.12kg
0q
79053.000 White
79052.000 Black
ERCO 3-circuit
adapter
With earthed
coupler. 250V, 6A.
Spiral cable
3x0,75mm².
L 700/1400mm.
12692.000 White
3x1,5mm²
12693.000 White
5x1,5mm²
12690.000 Black
3x1,5mm²
12691.000 Black
5x1,5mm²
Spiral cable
L 500/2,500mm.
83816.000
DALI
DALI switch actuator, double, 16A
Two voltage-free contacts for switching
ohmic, inductive and capacitive loads
max 16A.
DALI interface with two independent
addresses.
Mounting on DIN rail.
Weight 0.21kg
Cuines de Santa
Catarina restaurant, Barcelona.
Architect/lighting design: Sandra
Tamuella, Isabel
Lopéz, Barcelona.
www.erco.com
ERCO Program 2008/09
85
ERCO track Mechanical accessories
0
79551.000 White
79550.000 Black
Mounting device
for suspension on live end.
Metal.
0 0
79556.000 White
79555.000 Black
Mounting device
for suspension on coupler with feeding.
Metal.
0
79561.000 White
79560.000 Black
Mounting device
for suspension on L-connector.
Metal.
0 0
79566.000 White
79565.000 Black
Mounting device
for suspension on T-connector.
Metal.
0 0
79515.000
Mechanical bridge
for connection of plaster trim profiles.
78633.000
Mounting toggle
for fixing track in plaster trim profiles.
12440.000
Wire rope
Load: 20kg.
ø 1.75mm, L 10m.
16910.000
Turnbuckle with
2 clamps
Metal, galvanised.
Load: 60kg.
79500.000
Suspension device for track
Metal, galvanised.
Subsequent mounting of suspension
bridge in ERCO track possible.
Load: 15kg.
L 30mm, H 47mm.
78350.000
Plaster trim profile
Aluminium profile, silver anodised. For
flush mounting of track in plasterboard
ceilings.
B 40mm, H 52mm, L 3000mm.
Weight 3.00kg
78652.000 White
78651.000 Black
Mounting device
for subsequent
mounting on
track.
78671.000 White
78670.000 Black
Mounting device
for suspension on
track.
Metal.
79571.000 White
79570.000 Black
Mounting device
for suspension on X-connector.
Metal.
79501.000
Suspension bridge
for direct track coupler connection.
Metal, galvanised.
Subsequent mounting of suspension
bridge in ERCO track possible.
Load: 20kg.
L 180mm, H 47mm.
Matisse Exhibition, K20 Art
Gallery of North
Rhine-Westphalia, Düsseldorf. Exhibitions
architecture: Kühn
Malvezzi Architekten, Berlin.
86
ERCO Program 2008/09
www.erco.com
ERCO track Mechanical accessories
79503.000
Fixing clip
Spring steel, galvanised.
Load: 20kg.
L 33mm.
14mm.
79548.000 White
79547.000 Black
Cover profile
Plastic.
L 10m.
79504.000
Junction
With two screws.
Aluminium, anodised.
Load 30kg.
L 50mm, H 26mm.
-
79530.000
Mounting device
for M5 screws, with retaining spring.
Cast aluminium.
Load: 10kg.
79527.000
Display hook
Plastic/steel.
Load: 10kg.
L 67mm.
79528.000
Mounting device
with M4 set screw
and two nuts.
Kunststoff/Stahl.
Load: 10kg.
L 55mm.
79549.000
Cable nippers
for shortening the
copper conductors
in track.
Rembrandt Exhibition, Culture
Forum of the
Berlin State
Museums, Berlin.
Exhibitions architecture/lighting
design: Hansjörg Hartung,
Berlin; Berlin
State Museums.
Shop window of
the "Donaldson"
boutique, Brussels.
www.erco.com
ERCO Program 2008/09
87
12446.000 White
12445.000 Black
Pendant tube suspension
Pendant tube: metal, powder-coated.
ø 13mm, L 1,040mm.
Baldachin: plastic. ø 64mm, H 73mm.
Load: 20kg.
12671.000
Wire rope suspension
Wire rope: ø 1.50mm, L 2,500mm.
Mounting bush: metal.
Canopy: plastic, white, ø 105mm,
H 43mm.
Cable entry for 5x1.5mm² plasticcoated cable or spiral cable.
Strain relief. Terminal block.
Load: 20kg.
¢
12662.000
Wire rope suspension
Wire rope: ø 1.50mm, L 2,500mm.
Mounting bush: metal.
Canopy: plastic, white, ø 65mm,
H 63mm.
Cable entry for 3x1.5mm² plasticcoated cable or spiral cable.
Strain relief. Terminal block.
Load: 20kg.
ERCO track Suspension equipment
12561.000 White
12560.000 Black
Wire rope suspension
With rapid connector for adjustment
levelling.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
powder-coated. ø 65mm, H 14mm.
Load: 20kg.
12557.000
Wire rope suspension
With single-point fixing and rapid connector for adjustment levelling.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
white powder-coated. ø 18mm,
H 49mm.
Load 20kg (with heavy load dowel).
ERCO flanged track
Flanges for ceiling panels.
4 isolated copper conductors and
pressed-in earth conductor.
When used as DALI track: one 16A circuit and two conductors for connecting
to the DALI data line.
When used as a 3-circuit track: three
separately switchable circuits 16A each.
The ERCO track system is approved to
IEC 60570 (EN 60570/VDE 0711 part
300).
Accessories page 90
78353.000 White (RAL9002)
Aluminium profile, powder-coated.
Weight 3.60kg
0q
78323.000 Silver
Aluminium profile, anodised.
Weight 3.60kg
0q
88
ERCO Program 2008/09
www.erco.com
ERCO flanged track
$!,)
Spotlights and
ERCO track
provide a flexible
basis for the lighting concept of
the Swedish EGO
chemist stores.
www.erco.com
ERCO Program 2008/09
89
ERCO flanged track DALI installation: connectors
79241.000 White
79261.000 Black
DALI
DALI live end
Plastic.
Earth conductor, left.
79302.000 White
79322.000 Black
End plate
Plastic.
0q
0q
79245.000 White
79265.000 Black
DALI
DALI L-connector
Plastic.
Earth conductor outside. Feeding possible. Through-wiring.
0q
79248.000 White
79268.000 Black
DALI
DALI X-connector
Plastic.
Feeding possible. Through-wiring.
79246.000 White
79266.000 Black
DALI
DALI T-connector
Plastic.
Earth conductor, right. Feeding possible.
Through-wiring.
0q
79247.000 White
79267.000 Black
DALI
DALI T-connector
Plastic.
Earth conductor, left. Feeding possible.
Through-wiring.
0q
0q
79244.000 White
79264.000 Black
DALI
DALI L-connector
Plastic.
Earth conductor inside. Feeding possible. Through-wiring.
90
79243.000 White
79263.000 Black
DALI
DALI coupler
Plastic.
Through-wiring. Feeding possible.
0q
0q
0q
79240.000 White
79260.000 Black
DALI
DALI live end
Plastic.
Earth conductor, right.
79315.000 White
79335.000 Black
Coupler
for flush connection of ERCO track.
Plastic.
0q
ERCO Program 2008/09
www.erco.com
ERCO flanged track DALI installation: electrical accessories
79047.000 White
79048.000 Black
DALI
ERCO DALI
adapter
For 250V, 10A
pendant luminaire, with strain
relief. Plastic.
Connection cable
5x0,75mm²,
L 1500mm.
Weight 0.39kg
79094.000 White
79095.000 Black
DALI
DALI singlet
Recessed mounting/cast into concrete.
For spotlights with ERCO DALI adapter,
250V, 6A.
Plastic. Strain relief.
Mechanical Load:
Ceiling mounting 8.00kg.
Wall mounting 3.50kg.
Weight 0.32kg
0q
79092.000 White
79093.000 Black
DALI
DALI singlet
Surface mounting. For spotlights with
ERCO DALI adapter, 250V, 6A.
Plastic. Strain relief.
Mechanical Load:
Ceiling mounting 8.00kg.
Wall mounting 3.50kg.
Weight 0.13kg
12693.000 White
5x1,5mm²
12691.000 Black
5x1,5mm²
Spiral cable
L 500/2,500mm.
0q
ERCO flanged track 3-circuit installation: connectors
79341.000 White
79361.000 Black
3-circuit live end
Plastic.
Earth conductor, left.
79302.000 White
79322.000 Black
End plate
Plastic.
79345.000 White
79365.000 Black
3-circuit L-connector
Plastic.
Earth conductor outside. Feeding possible. Through-wiring.
0q
79348.000 White
79368.000 Black
3-circuit X-connector
Plastic.
Feeding possible. Through-wiring.
www.erco.com
79346.000 White
79366.000 Black
3-circuit T-connector
Plastic.
Earth conductor, right. Feeding possible.
Through-wiring.
0q
79347.000 White
79367.000 Black
3-circuit T-connector
Plastic.
Earth conductor, left. Feeding possible.
Through-wiring.
0q
0q
0q
79344.000 White
79364.000 Black
3-circuit L-connector
Plastic.
Earth conductor inside. Feeding possible. Through-wiring.
79343.000 White
79363.000 Black
3-circuit coupler
Plastic.
Feeding possible. Through-wiring.
0q
0q
0q
0q
79340.000 White
79360.000 Black
3-circuit live end
Plastic.
Earth conductor, right.
79315.000 White
79335.000 Black
Coupler
for flush connection of ERCO track.
Plastic.
0q
ERCO Program 2008/09
91
ERCO flanged track 3-circuit installation: electrical accessories
79023.000 White
79024.000 Black
ERCO 3-circuit
adapter
With earthed
socket outlet.
250V, 10A.
Plastic. Cover:
plastic, black.
L 71mm, B 56mm,
H 90mm.
79031.000 White
79030.000 Black
ERCO 3-circuit
adapter
Installation kit
for 250V, 10A
pendant luminaire, with strain
relief. Plastic.
Connection cable
3 x 0.75mm,
L 1500mm.
Individual parts to
be assembled onsite.
Weight 0.15kg
79055.000 White
79054.000 Black
ERCO 3-circuit
adapter
For pendant luminaire, 250V, 10A,
with hook and
terminal block.
Plastic.
Load: 10kg.
L 71mm, B 32mm,
H 33mm.
79037.000 White
79036.000 Black
1-circuit singlet
Recessed mounting/cast into concrete. For spotlights with ERCO 3-circuit
adapter, 250V, 6A.
Plastic. Strain relief.
Mechanical Load:
Ceiling mounting 8.00kg.
Wall mounting 3.50kg.
Weight 0.32kg
0q
79039.000 White
79038.000 Black
1-circuit singlet
Surface mounting. For spotlights with
ERCO 3-circuit adapter, 250V, 6A.
Plastic. Strain relief.
Mechanical Load:
Ceiling mounting 8.00kg.
Wall mounting 3.50kg.
Weight 0.12kg
0q
79053.000 White
79052.000 Black
ERCO 3-circuit
adapter
With earthed
coupler. 250V, 6A.
Spiral cable
3x0,75mm².
L 700/1400mm.
12692.000 White
3x1,5mm²
12693.000 White
5x1,5mm²
12690.000 Black
3x1,5mm²
12691.000 Black
5x1,5mm²
Spiral cable
L 500/2,500mm.
83816.000
DALI
DALI switch actuator, double, 16A
Two voltage-free contacts for switching
ohmic, inductive and capacitive loads
max 16A.
DALI interface with two independent
addresses.
Mounting on DIN rail.
Weight 0.21kg
Galerie de Pury
& Luxembourg,
Löwenbräu Complex, Zurich.
Lighting design:
Neuco AG, Zurich.
92
ERCO Program 2008/09
www.erco.com
ERCO flanged track Mechanical accessories
0
79551.000 White
79550.000 Black
Mounting device
for suspension on live end.
Metal.
0 0
0 0
0
79556.000 White
79555.000 Black
Mounting device
for suspension on coupler with feeding.
Metal.
79561.000 White
79560.000 Black
Mounting device
for suspension on L-connector.
Metal.
79566.000 White
79565.000 Black
Mounting device
for suspension on T-connector.
Metal.
78671.000 White
78670.000 Black
Mounting device
for suspension on
track.
Metal.
12440.000
Wire rope
Load: 20kg.
ø 1.75mm, L 10m.
79500.000
Suspension device for track
Metal, galvanised.
Subsequent mounting of suspension
bridge in ERCO track possible.
Load: 15kg.
L 30mm, H 47mm.
78652.000 White
78651.000 Black
Mounting device
for subsequent
mounting on
track.
79503.000
Fixing clip
Spring steel, galvanised.
Load: 20kg.
L 33mm.
14mm.
79527.000
Display hook
Plastic/steel.
Load: 10kg.
L 67mm.
79548.000 White
79547.000 Black
Cover profile
Plastic.
L 10m.
www.erco.com
79501.000
Suspension bridge
for direct track coupler connection.
Metal, galvanised.
Subsequent mounting of suspension
bridge in ERCO track possible.
Load: 20kg.
L 180mm, H 47mm.
79528.000
Mounting device
with M4 set screw
and two nuts.
Kunststoff/Stahl.
Load: 10kg.
L 55mm.
16910.000
Turnbuckle with
2 clamps
Metal, galvanised.
Load: 60kg.
79571.000 White
79570.000 Black
Mounting device
for suspension on X-connector.
Metal.
0 0
79504.000
Junction
With two screws.
Aluminium, anodised.
Load 30kg.
L 50mm, H 26mm.
-
79530.000
Mounting device
for M5 screws, with retaining spring.
Cast aluminium.
Load: 10kg.
79549.000
Cable nippers
for shortening the
copper conductors
in track.
ERCO Program 2008/09
93
12446.000 White
12445.000 Black
Pendant tube suspension
Pendant tube: metal, powder-coated.
ø 13mm, L 1,040mm.
Baldachin: plastic. ø 64mm, H 73mm.
Load: 20kg.
12671.000
Wire rope suspension
Wire rope: ø 1.50mm, L 2,500mm.
Mounting bush: metal.
Canopy: plastic, white, ø 105mm,
H 43mm.
Cable entry for 5x1.5mm² plasticcoated cable or spiral cable.
Strain relief. Terminal block.
Load: 20kg.
¢
12662.000
Wire rope suspension
Wire rope: ø 1.50mm, L 2,500mm.
Mounting bush: metal.
Canopy: plastic, white, ø 65mm,
H 63mm.
Cable entry for 3x1.5mm² plasticcoated cable or spiral cable.
Strain relief. Terminal block.
Load: 20kg.
ERCO flanged track Suspension equipment
12561.000 White
12560.000 Black
Wire rope suspension
With rapid connector for adjustment
levelling.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
powder-coated. ø 65mm, H 14mm.
Load: 20kg.
12557.000
Wire rope suspension
With single-point fixing and rapid connector for adjustment levelling.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
white powder-coated. ø 18mm,
H 49mm.
Load 20kg (with heavy load dowel).
94
ERCO Program 2008/09
www.erco.com
Hi-trac track and light structure
The Hi-trac light structure is able
to support heavy loads and allows
a wide spacing between the suspension points. Hi-trac is a 72mm
high aluminium profile section
available in two versions: On the
one hand, as an ERCO track with
an empty upper compartment for
cables and, otherwise as an indirect
luminaire for T16 fluorescent lamps
with ERCO track contained in the
lower part. All ERCO spotlights,
floodlights and wallwashers with
3-circuit adapters, DALI adapters
or transadapters can be used on
the track. Luminaires can be fitted
as uplights into the upper empty
compartment. Hi-trac enables
highlighting or washlighting to
be combined with indirect lighting. Numerous connectors are
available, allowing wall or ceiling
mounting and the construction of
rightangled structures.
To use the Hi-trac tracks and the
Hi-trac light structure for a DALI
application, the same conductors
are used in the track, but just connected differently: only one conductor carries the circuit current,
the other two conductors are used
for the control signal. Special DALI
accessories ensure that the track
is correctly installed. This arrangement ensures the optimum logistics and availability of DALI track
systems. It also means that existing
track installations can be economically retrofitted with ERCO DALI
technology.
www.erco.com
Dr. Oetker Welt,
Bielefeld. Architect: Ackermann
& Raff, Tübingen.
Exhibition design:
Triad, Berlin. Electrical fitters:
Elektro Beckhoff,
Verl.
Spotlights are fitted with DALI
adapters for the mechanical and
electrical connection and also for
the control signals.
ERCO Program 2008/09
95
Hi-trac track and light structure
The product range consists of profile section lengths of 2m to 4m.
The 36mm x 72mm rectangular
sectioned aluminium profile is
available silver or powder-coated
white. The underside is designed
as a 3-circuit track and the topside as an empty compartment or
as a luminaire. The light structure’s
connectors are suitable for forming linear and rightangled layouts.
Pendant tubes or wire ropes are
available as suspension systems.
Track
When connected to a three-phase
network, each of the three circuits
can be loaded to a maximum of
16A. The tracks can be arranged
in linear, L-shaped, U-shaped and
rectangular formations by using Lconnectors, sometimes also with
T-connectors and X-connectors.
The mounting options available are
suspension systems with pendant
tube or wire-rope. In the DALI version, one conductor carries the
phase and the two others are used
for the control signal. All the connectors for 3-circuit installation or
for DALI applications are available
for making the electrical connection.
Application
For a fully accessible power supply for spotlights, floodlights, wallwashers ,accent lighting and washlighting in all professional lighting
situations. With minimum suspension points for large spans.
Luminaires
In the Hi-trac, T16 fluorescent
lamps up to 54W are used in the
upper profile. In the DALI version,
one conductor carries the supply
and the other two the control signal. The connectors are available
to make the electrical connection
for 3-circuit installation or for DALI
applications..
Application
For indirect general lighting in
offices, medical practices and
entrance areas, e.g. in public
buildings and hotels. Additional
highlighting and washlighting
using spotlights, floodlights and
wallwashers.
Uplights
A double uplight is available for
washlighting with the warm white
light of two 150W tungsten halogen lamps.
Application
For indirect general lighting in
offices, medical practices and
entrance areas, e.g. in public
buildings and hotels. Additional
highlighting and washlighting
using spotlights, floodlights and
wallwashers.
96
ERCO Program 2008/09
www.erco.com
Hi-trac track and light structures
In addition to the classic ERCO
track, the Hi-trac range of track
and light structures is also
available for DALI installations.
This means that both the trackmounted spotlights as well as the
light structure luminaires can be
incorporated in a Light System
DALI installation and can be individually controlled using the
Light Studio software. Instead of
introducing an additional, incompatible track section, the proven
5-conductor track from the light
structures is used in a new way
in a DALI installation. Whereas
in conventional 3-circuit installations, all conductors are connected to the network and are
individually protected, the DALI
installation only uses one circuit
to supply the Light Clients with
mains voltage. The two remaining copper conductors are used as
DALI data lines. The special DALI
accessories for the electrical live
end or connection are labelled
accordingly.
2
3
Hi-trac track
and light structure for 3-circuit
installation
1
2
3
N
PE
Circuit 1
Circuit 2
Circuit 3
Neutral conductor
Earth conductor
Hi-trac track
and light structure for DALI
installation
DA
DA
1
N
PE
DALI data line
DALI data line
Circuit
Neutral conductor
Earth conductor
1
N
PE
DA
1
DA
N
PE
Hi-trac track and
light structures
are 72mm high
aluminium sections. They are
available in two
versions: as a
track with an
empty upper
compartment or
as a track with
an indirect T16
fluorescent lamp.
www.erco.com
ERCO Program 2008/09
97
ERCO Hi-trac track
0q
0q
13401.000 White (RAL9002)
13441.000 Silver
Weight 6.00kg
0q
13402.000 White (RAL9002)
13442.000 Silver
Weight 8.00kg
The ERCO track system is approved to
IEC 60570 (EN 60570/VDE 0711 part
300).
Accessories page 101
13400.000 White (RAL9002)
13440.000 Silver
Weight 4.00kg
Panel profile: aluminium, powdercoated.
Upper part: empty compartment, for
fixing of uplights, through-wiring or
cover profile.
Lower part: track. 4 isolated copper
conductors and impressed earth conductor.
When used as DALI track: one 16A circuit and two conductors for connecting
to the DALI data line.
When used as a 3-circuit track: three
separately switchable circuits 16A each.
Boyds Bistro,
Copenhagen.
Architect/Interior
Design: Birgitte
de Neergaard,
Copenhagen.
vital pharmacy,
Vienna. Architecture/lighting designers:
bpw architektur,
Vienna.
98
ERCO Program 2008/09
www.erco.com
Hi-trac Luminaire indirect lighting for fluorescent lamps
Panel profile: aluminium, powdercoated.
Upper part: insert for T16 fluorescent
lamp.
3-pole terminal block. Covered electronic control gear. Fluorescent lamp
operation with one track circuit.
Lower part: track. 4 isolated copper
conductors and impressed earth conductor.
When used as DALI track: one 16A circuit and two conductors for connecting
to the DALI data line. Use DALI electrical
feeding 13491.000, 13492.000.
0q
750 cd
150°
150°
120°
120°
13403.000 White (RAL9002) ECG
13408.000 Silver ECG
T16 28W G5 2600lm
Weight 5.00kg LMF F
When used as a 3-circuit track: three
separately switchable circuits 16A
each. Use electrical feeding 12553.000,
12552.000.
The ERCO track system is approved to
IEC 60570 (EN 60570/VDE 0711 part
300).
Accessories page 101
T16
LOR
DLOR
ULOR
0q
1000 cd
150°
150°
120°
120°
13404.000 White (RAL9002) ECG
13409.000 Silver ECG
T16 54W G5 4450lm
Weight 5.00kg LMF F
0.59
0.00
0.59
T16
LOR
DLOR
ULOR
Connected load
13403.000 P:
13408.000 P:
13404.000 P:
13409.000 P:
31 W
31 W
61 W
61 W
Connected load per 100lx
13403.000 P*: 3.91 W/m²
13408.000 P*: 3.91 W/m²
13404.000 P*: 4.49 W/m²
13409.000 P*: 4.49 W/m²
0.59
0.00
0.59
Number of luminaires per 100lx
13403.000 n*: 12.61 1/100m²
13408.000 n*: 12.61 1/100m²
13404.000 n*:
7.37 1/100m²
13409.000 n*:
7.37 1/100m²
Architecture Biennial 2002, German Pavilion,
Venice. Architect: Hilde Léon,
Léon Wohlhage
Wernik Architekten, Berlin. Lighting designer: Licht
Kunst Licht, Bonn/
Berlin.
www.erco.com
ERCO Program 2008/09
99
Hi-trac Luminaire indirect lighting for fluorescent lamps
Panel profile: aluminium, powdercoated.
Upper part: insert for T16 fluorescent
lamp.
5-pole terminal block. Covered electronic control gear. Fluorescent lamp
operation with one track circuit.
Lower part: track. 4 isolated copper
conductors and impressed earth conductor.
When used as DALI track: one 16A circuit and two conductors for connecting
to the DALI data line. Use DALI electrical
feeding 13491.000, 13492.000.
$!,)
750 cd
150°
150°
120°
120°
13413.000 White (RAL9002) ECG DALI
13418.000 Silver ECG DALI
T16 28W G5 2600lm
T16 54W G5 4450lm
Weight 5.00kg LMF F
When used as a 3-circuit track: three
separately switchable circuits 16A
each. Use electrical feeding 12553.000,
12552.000.
The ERCO track system is approved to
IEC 60570 (EN 60570/VDE 0711 part
300).
Accessories page 101
0q
T16
LOR
DLOR
ULOR
0.59
0.00
0.59
1000 cd
150°
150°
120°
120°
T16
LOR
DLOR
ULOR
Connected load
13413.000 P:
13413.000 P:
13418.000 P:
13418.000 P:
Number of luminaires per 100lx
13413.000 n*: 12.61 1/100m²
13413.000 n*:
7.37 1/100m²
13418.000 n*: 12.61 1/100m²
13418.000 n*:
7.37 1/100m²
Connected load per 100lx
13413.000 P*: 3.91 W/m²
13413.000 P*: 4.49 W/m²
13418.000 P*: 3.91 W/m²
13418.000 P*: 4.49 W/m²
31 W
61 W
31 W
61 W
0.59
0.00
0.59
Hi-trac Uplights for tungsten halogen lamps
Housing for use on the upper compartment of Hi-trac profiles: cast aluminium, powder-coated. Insert: Metal,
powder-coated.
Through-wiring possible.
Reflectors: Aluminium, silver anodised.
Lamp cover: Safety glass.
Accessories page 101
13540.000 White (RAL9002)
2×QT-DE12 150W 230V R7s L75mm
2550lm
Weight 2.60kg LMF F
150°
120°
120°
0q
1500 cd
150°
LOR
DLOR
ULOR
0.46
0.00
0.46
2×QT-DE12
Connected load
13540.000 P: 300 W
100
ERCO Program 2008/09
Connected load per 100lx
13540.000 P*: 24.76 W/m²
Number of luminaires per 100lx
13540.000 n*: 8.25 1/100m²
www.erco.com
Hi-trac track and light structure
13475.000 White
13476.000 Silver
Hi-trac T-connector
Cast aluminium with plastic cover.
Feeding and through-wiring to be
ordered separately.
Suspension possible.
Weight 0.40kg
www.erco.com
0
13480.000 White
13481.000 Silver
Hi-trac X-connector
Cast aluminium with plastic cover.
Feeding and through-wiring to be
ordered separately.
Suspension possible.
Weight 0.60kg
13470.000 White
13471.000 Silver
Hi-trac L-connector
Cast aluminium with plastic cover.
Feeding and through-wiring to be
ordered separately.
Suspension possible.
Weight 0.30kg
0
13465.000 White
13466.000 Silver
Hi-trac Coupler housing
Cast aluminium with plastic cover.
Feeding and through-wiring to be
ordered separately.
Suspension possible.
Weight 0.30kg
13460.000 White
13461.000 Silver
Hi-trac Live-end housing
Cast aluminium with plastic cover.
Feeding and through-wiring to be
ordered separately.
Suspension possible.
Weight 0.25kg
13485.000 White
13486.000 Silver
Hi-trac End plate
Plastic.
Weight 0.02kg
0
0
0
Hi-trac track and light structure Accessories
13500.000 White
13501.000 Silver
Hi-trac Wall bracket
Cast aluminium with cover. Sliding
adjustment +/-5mm.
Feeding to be ordered separately.
Weight 0.30kg
79315.000 White
Coupler
for flush connection of ERCO track.
Plastic.
0q
ERCO Program 2008/09
101
13492.000
DALI
DALI electrical feeding
and through-wiring for ERCO DALI
track systems. Plastic, white.
Earth conductor, right.
5-pole terminal block.
12552.000
Electrical feeding
and through-wiring for ERCO 3-circuit
tracks. Plastic, white.
Earth conductor, left.
5-pole terminal block.
0q
83829.000
DALI
DALI dimmer 1000W
for ohmic loads, conventional and electronic transformers.
Mounting on DIN rail.
12692.000 White
3x1,5mm²
Spiral cable
L 500/2,500mm.
12553.000
Electrical feeding
and through-wiring for ERCO 3-circuit
tracks. Plastic, white.
Earth conductor, right.
5-pole terminal block.
83816.000
DALI
DALI switch actuator, double, 16A
Two voltage-free contacts for switching
ohmic, inductive and capacitive loads
max 16A.
DALI interface with two independent
addresses.
Mounting on DIN rail.
Weight 0.21kg
13490.000
Hi-trac Mounting device
for suspension of butt-jointed profile.
Cast aluminium.
Feeding not possible. Electrical coupler
79315 to be ordered separately.
12671.000
Wire rope suspension
Wire rope: ø 1.50mm, L 2,500mm.
Mounting bush: metal.
Canopy: plastic, white, ø 105mm,
H 43mm.
Cable entry for 5x1.5mm² plasticcoated cable or spiral cable.
Strain relief. Terminal block.
Load: 20kg.
102
¢
12662.000
Wire rope suspension
Wire rope: ø 1.50mm, L 2,500mm.
Mounting bush: metal.
Canopy: plastic, white, ø 65mm,
H 63mm.
Cable entry for 3x1.5mm² plasticcoated cable or spiral cable.
Strain relief. Terminal block.
Load: 20kg.
ERCO Program 2008/09
12561.000 White
12560.000 Black
Wire rope suspension
With rapid connector for adjustment
levelling.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
powder-coated. ø 65mm, H 14mm.
Load: 20kg.
12446.000 White
12445.000 Black
12447.000 Silver
Pendant tube suspension
Pendant tube: metal, powder-coated.
ø 13mm, L 1,040mm.
Baldachin: plastic. ø 64mm, H 73mm.
Load: 20kg.
13420.000 White L 1000mm.
13421.000 White L 2000mm.
13422.000 Silver L 1000mm.
13423.000 Silver L 2000mm.
Hi-trac Cover profile
for use on the upper compartment.
Aluminium, powder-coated. Fitted
without tools.
79546.000
Cable nippers
for shortening the
copper conductors
in track.
16910.000
Turnbuckle with
2 clamps
Metal, galvanised.
Load: 60kg.
12440.000
Wire rope
Load: 20kg.
ø 1.75mm, L 10m.
12693.000 White
5x1,5mm²
Spiral cable
L 500/2,500mm.
0q
13491.000
DALI
DALI electrical feeding
and through-wiring for ERCO DALI
track systems. Plastic, white.
Earth conductor, left.
5-pole terminal block.
Hi-trac track and light structure Accessories
12557.000
Wire rope suspension
With single-point fixing and rapid connector for adjustment levelling.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
white powder-coated. ø 18mm,
H 49mm.
Load 20kg (with heavy load dowel).
www.erco.com
T16 light structure
BPA Banca
Privada d’Andorra,
Escaldes-Engordany, Andorra.
Architect/lighting
design: Orobitg
Arquitects/Stefano
Colli.
The T16 light structure is identified
by its very precise design. Due to its
compact dimensions it is an inconspicuous architectural detail. Its
versatility as a lighting tool means
it can be used universally. T16 light
structures are designed primarily
for the T16 fluorescent lamp. They
are always suspended at the ends
of the profile so that unsupported
spans of up to 3.2m are possible.
www.erco.com
ERCO Program 2008/09
103
T16 light structure
The range consists of three luminaire types: Direct luminaires, direct /indirect luminaires and indirect luminaires. They consist of a
72mm x 60mm rectangular sectioned aluminium profile and are
powder-coated white or silver. The
ends of the profile are finished
with mounting trays to secure the
luminaires to each other or to the
connectors. The connectors are cast
aluminium and provide the suspension of the luminaires and connection to the power supply. They
are suitable for forming linear and
right-angled layouts.
An adjustable connector means
that geometric forms to be constructed. Pendant tubes or wire
ropes are available as suspension
systems for the profiles.
Luminaires, direct
Each luminaire is designed for one
T16 fluorescent lamp of 54W. In
the 2-lamp versions, two singlelamp luminaires are arranged end
to end in the profile. The light
apertures for the single-lamp
luminaires are asymmetrically positioned in the profiles. Conversely,
the light apertures in the 2-lamp
versions are symmetrically positioned in the profile. All luminaires
for direct lighting are fitted with
Darklight reflectors with 40° cutoff angles.
Luminaires, direct/indirect
These luminaires are to be fitted
with a 54W T16 fluorescent lamp.
In the 2-lamp versions, two singlelamp luminaires are arranged end
to end in the profile. The light
apertures for the single-lamp
luminaires are asymmetrically
positioned in the profiles. Conversely, the light apertures in the
2-lamp versions are symmetrically
positioned in the profile.
All luminaires for direct/indirect
lighting are fitted with Darklight
reflectors with 40° cut-off. The
upper light apertures can be fitted with clear, longitudinally ribbed
covers.
Application
For direct/indirect general lighting in offices, medical practices and
entrance areas, e.g. in public buildings and hotels.
Luminaires, indirect
Indirect luminaires are created as a
profile which is covered below and
take T16 fluorescent 54W lamps.
In the 2-lamp versions, two singlelamp luminaires are arranged end
to end in the profile. In this case,
however, the light apertures of the
single-lamp and 2-lamp luminaires are arranged symmetrically in
the profile. These can also be fitted
with clear, ribbed covers.
Application
For purely indirect general lighting in offices, medical practices and
entrance areas, e.g. in public buildings and hotels.
104
ERCO Program 2008/09
Application
For direct general lighting in
offices, medical practices and
entrance areas, e.g. in public
buildings and hotels.
www.erco.com
T16 light structure
The upper-side is provided with a
cover. The lower cover features a
longitudinal structure.
Empty profile
Application
The empty compartments can be
used to provide a direct connection to the luminaires or to act as
connectors.
Sidley Austin
LLP Law Office,
London. Architect: Gensler, San
Francisco/London.
www.erco.com
ERCO Program 2008/09
105
T16 light structure Luminaire direct lighting for fluorescent lamps
7
60°
60°
30°
T16
7
13606.000 White (RAL9002) ECG
13607.000 Silver ECG
2×T16 54W G5 4450lm
Lamps positioned in series.
Weight 8.90kg LMF C
13602.000 White (RAL9002) ECG
13603.000 Silver ECG
T16 54W G5 4450lm
Light aperture positioned asymmetrically in profile.
Weight 4.90kg LMF C
Aluminium profile, powder-coated. Cast
aluminium mounting plates, for direct
connection of luminaires or connectors.
Lower lateral cover profiles: aluminium,
fluted.
Feeding possible. Electronic control
gear. 5-pole terminal block on each end
of profile. Through-wiring 5x1.5mm².
Darklight reflector with parabolic cross
baffles: aluminium, silver, mirror-finish
anodised. Cut-off angle 40° (C0), 30°
(C90). For lamp replacement removable
without tools, retained on safety cords.
Accessories page 109
2000 cd
LOR
UGR C0
UGR C90
65° <
0.57
-17.3
18.2
1000 cd/m²
30°
Connected load
13602.000 P:
61 W
13603.000 P:
61 W
13606.000 P: 118 W
13607.000 P: 118 W
Connected load per 100lx
13602.000 P*: 2.42 W/m²
13603.000 P*: 2.42 W/m²
13606.000 P*: 2.34 W/m²
13607.000 P*: 2.34 W/m²
2×T16
Number of luminaires per 100lx
13602.000 n*: 3.97 1/100m²
13603.000 n*: 3.97 1/100m²
13606.000 n*: 1.99 1/100m²
13607.000 n*: 1.99 1/100m²
Palais du Vin,
Les Ateliers des
Tanneurs, Brussels. Architect:
Christophe Gillis,
OZON Architecture,
Brussels.
106
ERCO Program 2008/09
www.erco.com
T16 light structure Luminaire direct/indirect lighting for fluorescent lamps
7
13612.000 White (RAL9002) ECG
13613.000 Silver ECG
T16 54W G5 4450lm
Light aperture positioned asymmetrically in profile.
Weight 4.70kg LMF F
Aluminium profile, powder-coated.
Upper side with openings for indirect lighting. Cast aluminium mounting
plates, for direct connection of luminaires or connectors. Lower lateral cover
profiles: aluminium, fluted.
Feeding possible. Electronic control
gear. 5-pole terminal block on each end
of profile. Through-wiring 5x1.5mm².
Darklight reflector with parabolic cross
baffles: aluminium, silver, mirror-finish
anodised. Cut-off angle 40° (C0), 30°
(C90). For lamp replacement removable
without tools, retained on safety cords.
Accessories page 109
120°
60°
1500 cd
120°
60°
LOR
DLOR
ULOR
UGR C0
UGR C90
65° <
0.79
0.40
0.38
-20.0
12.7
1000 cd/m²
7
13616.000 White (RAL9002) ECG
13617.000 Silver ECG
2×T16 54W G5 4450lm
Lamps positioned in series.
Weight 8.70kg LMF F
T16
Connected load
13612.000 P:
61 W
13613.000 P:
61 W
13616.000 P: 118 W
13617.000 P: 118 W
Connected load per 100lx
13612.000 P*: 2.30 W/m²
13613.000 P*: 2.30 W/m²
13616.000 P*: 2.23 W/m²
13617.000 P*: 2.23 W/m²
2×T16
Number of luminaires per 100lx
13612.000 n*: 3.78 1/100m²
13613.000 n*: 3.78 1/100m²
13616.000 n*: 1.89 1/100m²
13617.000 n*: 1.89 1/100m²
Munich Airport,
Terminal 2,
Munich. Architect:
Koch & Partner,
Munich. Electrical
engineers: ProElektroplan,
Ottobrunn.
Installation: ARGE
Bauer Elektro
GmbH + Co. KG,
Buchbach, Elektro
Kreutzpointner GmbH,
Burghausen.
www.erco.com
ERCO Program 2008/09
107
T16 light structure Luminaire indirect lighting for fluorescent lamps
Aluminium profile, powder-coated.
Lower side fluted. Cast aluminium
mounting plates, for direct connection
of luminaires or connectors.
Feeding possible. Electronic control
gear. 5-pole terminal block on each end
of profile. Through-wiring 5x1.5mm².
Accessories page 109
13622.000 White (RAL9002) ECG
13623.000 Silver ECG
T16 54W G5 4450lm
Weight 4.90kg LMF F
7
1250 cd
150°
150°
120°
120°
T16
LOR
DLOR
ULOR
7
13626.000 White (RAL9002) ECG
13627.000 Silver ECG
2×T16 54W G5 4450lm
Lamps positioned in series.
Weight 8.90kg LMF F
0.60
0.00
0.60
Connected load
13622.000 P:
61 W
13623.000 P:
61 W
13626.000 P: 118 W
13627.000 P: 118 W
Connected load per 100lx
13622.000 P*: 4.40 W/m²
13623.000 P*: 4.40 W/m²
13626.000 P*: 4.25 W/m²
13627.000 P*: 4.25 W/m²
2×T16
Number of luminaires per 100lx
13622.000 n*: 7.21 1/100m²
13623.000 n*: 7.21 1/100m²
13626.000 n*: 3.61 1/100m²
13627.000 n*: 3.61 1/100m²
T16 light structure Empty profile
Aluminium profile, powder-coated. Cast
aluminium mounting plates, for direct
connection of luminaires or connectors. Upper side with cover. Lower side
fluted.
Accessories page 109
13630.000 White (RAL9002)
13631.000 Silver
Weight 3.00kg
13632.000 White (RAL9002)
13633.000 Silver
Weight 4.90kg
108
ERCO Program 2008/09
www.erco.com
T16 light structure
T16 light structure Accessories
13654.000 White
13655.000 Silver
T16 light structure Dead end
Cast aluminium, powder-coated.
Feeding possible.
Weight 0.16kg
13660.000 White
13661.000 Silver
T16 light structure X-connector
Cast aluminium, powder-coated. Lower
side with plastic cover.
Feeding possible.
Weight 0.82kg
www.erco.com
ª
13662.000 White
13663.000 Silver
T16 light structure L-connector
Cast aluminium, powder-coated.
0°-180° tilt.
Weight 0.65kg
0
ª
13658.000 White
13659.000 Silver
T16 light structure T-connector
Cast aluminium, powder-coated. Lower
side with plastic cover.
Feeding possible.
Weight 0.70kg
0
0
13656.000 White
13657.000 Silver
T16 light structure 90°-connector
Cast aluminium, powder-coated. Lower
side with plastic cover.
Feeding possible.
Weight 0.58kg
13639.000
T16 light structure
Cover
For upper lighting
aperture.
Clear, ribbed
plastic cover.
0
0
12692.000 White
3x1,5mm²
Spiral cable
L 500/2,500mm.
83816.000
DALI
DALI switch actuator, double, 16A
Two voltage-free contacts for switching
ohmic, inductive and capacitive loads
max 16A.
DALI interface with two independent
addresses.
Mounting on DIN rail.
Weight 0.21kg
13650.000 White
13651.000 Silver
T16 light structure
Mounting device
for suspension on
mounting plates
and dead ends.
Cast aluminium,
powder-coated.
ERCO Program 2008/09
109
12561.000 White
12560.000 Black
Wire rope suspension
With rapid connector for adjustment
levelling.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
powder-coated. ø 65mm, H 14mm.
Load: 20kg.
¢
12662.000
Wire rope suspension
Wire rope: ø 1.50mm, L 2,500mm.
Mounting bush: metal.
Canopy: plastic, white, ø 65mm,
H 63mm.
Cable entry for 3x1.5mm² plasticcoated cable or spiral cable.
Strain relief. Terminal block.
Load: 20kg.
12446.000 White
12445.000 Black
12447.000 Silver
Pendant tube suspension
Pendant tube: metal, powder-coated.
ø 13mm, L 1,040mm.
Baldachin: plastic. ø 64mm, H 73mm.
Load: 20kg.
16910.000
Turnbuckle with
2 clamps
Metal, galvanised.
Load: 60kg.
12440.000
Wire rope
Load: 20kg.
ø 1.75mm, L 10m.
13652.000 White
13653.000 Silver
T16 light structure
Mounting device
for intermediate
suspension on
profile.
Cast aluminium,
powder-coated.
No suspension
possible in the
area of the cover
13639.000.
T16 light structure Accessories
12557.000
Wire rope suspension
With single-point fixing and rapid connector for adjustment levelling.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
white powder-coated. ø 18mm,
H 49mm.
Load 20kg (with heavy load dowel).
Sparkasse savings
bank, Würzburg.
Architect:
Architekturbüro
Appel, Würzburg.
Lighting design:
REA Reinhart
Engel Albert
Ingenieure.
110
ERCO Program 2008/09
www.erco.com
Monopoll track and light structure
Art gallery,
Emden. Architects: Friedrich
and Ingeborg
Spengelin,
Hanover.
With a 50mm tube diameter,
Monopoll light structures provide
a good solution wherever a filigree
lighting system is required which
remains subordinate to the architecture. T16 fluorescent lamps are
to be used in direct luminaires as
well as in the wallwasher.
For accent lighting, the Monopoll
track can be fitted with spotlights
for ERCO track. A large selection
of connectors, suspension devices
and accessories make the creation
of complex vertical and horizontal
structures possible. The Monopoll
profiles can be rotated at 15° intervals. This allows the direction of
the light aperture to be adjusted to
produce uniform wall illumination.
When using the Monopoll track
in a DALI application, the same
conductors are used in the track
but they are connected differently:
only one conductor carries the circuit current, the other two conductors are used for the control
signal. Special DALI accessories
ensure that the track is correctly
installed. This ensures optimum
logistics and availability of DALI
track systems. It also means that
existing track installations can be
economically retrofitted with ERCO
DALI technology.
The spotlights are fitted with
DALI adapters to facilitate mechanical and electrical connection and
to handle the control signals.
www.erco.com
ERCO Program 2008/09
111
Monopoll track and light structure
Monopoll luminaires consist of circular aluminium profile sections of
50mm dia., powder-coated white
and supplied in lengths of up to
3.20m. Monopoll wallwashers and
direct luminaires are available for
T16 fluorescent lamps. Each luminaire is designed for one fluorescent lamp of 54W. In the 2-lamp
versions, two single-lamp luminaires are arranged end to end in
the profile. The light apertures for
the single-lamp luminaires are
asymmetrically positioned in the
profiles. The light apertures on 2lamp luminaires are positioned
symmetrically.
The aluminium connectors are
used to construct linear and rightangled structures. An adjustable L
connector enables other geometric
forms to be constructed. Pendant
tubes or wire ropes are available as
suspension systems for the profiles.
Track
Monopoll track is available in
lengths of up to 4m. When connected to a three-phase network,
each of the three circuits can be
loaded to a maximum of 16A.
The circuits must be separately
protected. The tracks can be
arranged in linear, L-shaped, Ushaped and rectangular forms
using L connectors or with T
connectors, X connectors and
adjustable L connectors. Mounting
options include suspension with
pendant tube or with wire rope.
Rotation of the track profile in
15° steps using rotatable connectors. In the DALI version, one
conductor carries the supply and
the other two the control signal.
The connectors are available to
Empty profiles
Monopoll profiles are available as
empty compartments for connecting luminaires.
Wallwashers
The special wallwasher reflector
provides uniform illumination of
the wall even above the usually
suspended Monopoll profiles.
make the electrical connection for
3-circuit installation or for DALI
applications.
Application
For a flexible power supply to spotlights, floodlights and wallwashers
and for accent lighting and washlighting of all professional lighting
situations. For areas where filigree
lighting systems are to be suspended or routed along ceilings and
walls.
Application
Optimised, asymmetrical light distribution from a highly efficient
reflector system providing uniform
washlighting. Applications include
museums, exhibitions and art galleries, promotional and entrance
areas.
112
ERCO Program 2008/09
www.erco.com
Monopoll track and light structure
Luminaires, direct
All direct Monopoll luminaires have
aluminium-vaporised plastic Darklight reflectors with 20° cut-off
angles.
Application
For floodlighting in professional
lighting scenarios. For areas where
suspended, filigree lighting systems
provide ambient lighting along the
contours of counters, for instance.
Faena Hotel and
Universe, Buenos
Aires. Interior
Design: Philippe
Starck, Paris.
www.erco.com
ERCO Program 2008/09
113
Monopoll track and light structures
Monopoll track
and light structures are based
on a 50mm diameter round aluminium section.
In addition to the classic ERCO
track, the Monopoll range of
track and light structures is also
available for DALI installations.
This means that both the trackmounted spotlights as well as the
light structure luminaires can be
incorporated in a Light System
DALI installation and can be individually controlled using the
Light Studio software. Instead of
introducing an additional, incompatible track section, the proven
5-conductor track from the light
structures is used in a new way
in a DALI installation. Whereas
in conventional 3-circuit installations, all conductors are connected to the network and are
individually protected, the DALI
installation only uses one circuit
to supply the Light Clients with
mains voltage. The two remaining copper conductors are used as
DALI data lines. The special DALI
accessories for the electrical live
end or connection are labelled
accordingly.
114
ERCO Program 2008/09
2
3
1
N
Monopoll track
and light structure for 3-circuit
installation
1
2
3
N
PE
Circuit 1
Circuit 2
Circuit 3
Neutral conductor
Earth conductor
DA
N
Monopoll track
and light structure for DALI
installation
DA
DA
1
N
PE
DALI data line
DALI data line
Circuit
Neutral conductor
Earth conductor
PE
DA
1
PE
www.erco.com
ERCO Monopoll track
Extruded aluminium profile, powdercoated.
4 isolated copper conductors and
impressed earth conductor.
When used as DALI track: one 16A circuit and two conductors for connecting
to the DALI data line.
When used as a 3-circuit track: three
separately switchable circuits 16A each.
The ERCO track system is approved to
IEC 60570 (EN 60570/VDE 0711 part
300).
Accessories page 119
12031.000 White (RAL9002)
Weight 1.45kg
0q
12032.000 White (RAL9002)
Weight 2.90kg
0q
12033.000 White (RAL9002)
Weight 4.35kg
0q
12034.000 White (RAL9002)
Weight 5.80kg
0q
Monopoll Empty profile
Aluminium, powder-coated.
Accessories page 119
12037.000 White (RAL9002)
Weight 0.95kg
www.erco.com
ERCO Program 2008/09
115
Monopoll Wallwasher for fluorescent lamps
Aluminium profile, powder-coated.
Lower lateral cover profiles: aluminium,
powder-coated.
Electronic control gear. 5-pole terminal
block. Through-wiring 5x1.5mm².
Wallwasher reflector: aluminium, silver,
satin-matt anodised.
Accessories page 119
12404.000 White (RAL9002) ECG
T16 54W G5 4450lm
Light aperture positioned asymmetrically in profile.
Weight 3.00kg LMF C
0q
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
T16
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
12406.000 White (RAL9002) ECG
2×T16 54W G5 4450lm
Lamps positioned in series.
Weight 4.50kg LMF C
3.0
1.00
1.92
464
1.25
1.92
425
0q
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
2×T16
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
3.0
1.00
3.30
539
1.25
3.30
495
Direct beam
Monopoll luminaires ensure good
light in the library
at the Xaverian
Brothers High
School, Westwood
MA.
116
ERCO Program 2008/09
www.erco.com
Monopoll Luminaire direct lighting for fluorescent lamps
Aluminium profile, powder-coated.
Lower lateral cover profiles: aluminium,
powder-coated.
Electronic control gear. 5-pole terminal
block. Through-wiring 5x1.5mm².
Darklight reflector: plastic, silver, mirror-finish aluminium vaporised. Scratch
resistant special coating. Cut-off angle
20° (C0, C90). Visible parts, silver mirror-finish. For lamp replacement removable without tools.
Upper reflector: metal, white powdercoated.
Accessories page 119
0q
12412.000 White (RAL9002) ECG
T16 54W G5 4450lm
Light aperture positioned asymmetrically in profile.
Weight 3.50kg LMF C
60°
30°
T16
0q
12414.000 White (RAL9002) ECG
2×T16 54W G5 4450lm
Lamps positioned in series.
Weight 5.00kg
60°
1250 cd
LOR
UGR C0
UGR C90
75° <
0.58
20.8
20.3
200 cd/m²
30°
Connected load
12412.000 P:
61 W
12414.000 P: 118 W
Connected load per 100lx
12412.000 P*: 2.55 W/m²
12414.000 P*: 2.46 W/m²
2×T16
Number of luminaires per 100lx
12412.000 n*: 4.17 1/100m²
12414.000 n*: 2.09 1/100m²
Pilar and Joan
Miró foundation,
Palma de Mallorca. Architect:
Rafael Moneo.
www.erco.com
ERCO Program 2008/09
117
Monopoll track and light structure
Supreme Court,
Warsaw. Architect:
Marek Budzynski, Zbigniew
Badowski, Adam
Kowalewski.
118
ERCO Program 2008/09
www.erco.com
Monopoll track and light structure Accessories
12612.000
Monopoll Live-end housing
Cast aluminium, white (RAL9002)
powder-coated. Rotatable fixing insert,
to adjust profiles in steps of 15°.
Feeding and through-wiring to be
ordered separately.
Weight 0.35kg
13491.000
DALI
DALI electrical feeding
and through-wiring for ERCO DALI
track systems. Plastic, white.
Earth conductor, left.
5-pole terminal block.
12587.000
Monopoll Wall/ceiling fixing
Cast aluminium, white (RAL9002)
powder-coated. Rotatable fixing insert,
to adjust profiles in steps of 15°.
Feeding to be ordered separately.
0¢
12578.000
Monopoll End plate
Cover for free ends for T- and X-connectors.
Plastic, white.
79315.000 White
Coupler
for flush connection of ERCO track.
Plastic.
0q
12482.000
Monopoll Wall/ceiling cantilever
as end/intermediate fixing.
Cast aluminium, white (RAL9002)
powder-coated. One end plate: plastic,
white.
Feeding and through-wiring to be
ordered separately.
Load: 25kg.
Weight 0.82kg
12602.000
Monopoll L-connector
with mounting device 12567.000. Cast
aluminium, white (RAL9002) powdercoated, 90°-180° tilt. Rotatable fixing
insert, to adjust profiles in steps of 15°.
Feeding not possible. Through-wiring to
be ordered separately.
Weight 0.50kg
0
0
12527.000
Monopoll 90° connector
Cast aluminium, white (RAL9002)
powder-coated. Rotatable fixing insert,
to adjust profiles in steps of 15°.
Feeding and through-wiring to be
ordered separately.
Weight 0.20kg
0
www.erco.com
0
12597.000
Monopoll Wall/ceiling fixing
Cast aluminium, white (RAL9002)
powder-coated.
Mounting device for connector or
intermediate suspension to be ordered
separately.
Load: 20kg.
12502.000
Monopoll T-connector
for horizontal mounting.
Cast aluminium, white (RAL9002)
powder-coated. Rotatable fixing insert,
to adjust profiles in steps of 15°.
Feeding and through-wiring to be
ordered separately.
Weight 0.60kg
12512.000
Monopoll X-connector
Cast aluminium, white (RAL9002)
powder-coated. Rotatable fixing insert,
to adjust profiles in steps of 15°.
Feeding and through-wiring to be
ordered separately.
Weight 0.85kg
12617.000
Monopoll Coupler housing
Cast aluminium, white (RAL9002)
powder-coated. Rotatable fixing insert,
to adjust profiles in steps of 15°.
Feeding and through-wiring to be
ordered separately.
Weight 0.35kg
0
0
13492.000
DALI
DALI electrical feeding
and through-wiring for ERCO DALI
track systems. Plastic, white.
Earth conductor, right.
5-pole terminal block.
12606.000
Monopoll End cap
for ERCO 3-circuit track and empty profiles. Fixing plate and screw. Plastic,
white.
0
0
0
12552.000
Electrical feeding
and through-wiring for ERCO 3-circuit
tracks. Plastic, white.
Earth conductor, left.
5-pole terminal block.
0q
12553.000
Electrical feeding
and through-wiring for ERCO 3-circuit
tracks. Plastic, white.
Earth conductor, right.
5-pole terminal block.
0q
ERCO Program 2008/09
119
Monopoll track and light structure Accessories
12556.000
Electrical coupler
For through-wiring of ERCO 3-circuit
track on connectors. Plastic, white.
0q
12693.000 White
5x1,5mm²
Spiral cable
L 500/2,500mm.
12692.000 White
3x1,5mm²
Spiral cable
L 500/2,500mm.
83816.000
DALI
DALI switch actuator, double, 16A
Two voltage-free contacts for switching
ohmic, inductive and capacitive loads
max 16A.
DALI interface with two independent
addresses.
Mounting on DIN rail.
Weight 0.21kg
12271.000
Monopoll Mechanical bridge
Connection of track, empty profiles and
luminaires. Not suitable for combination of track with luminaires. Not suitable for wall/ceiling cantilever.
With 3-circuit track electric coupler
79315 to be ordered separately.
12083.000
Monopoll Cover profile
Aluminium, white (RAL9002) powdercoated.
B 32mm, L 500mm.
120
12446.000 White
Pendant tube suspension
Pendant tube: metal, powder-coated.
ø 13mm, L 1,040mm.
Baldachin: plastic. ø 64mm, H 73mm.
Load: 20kg.
ERCO Program 2008/09
12561.000 White
Wire rope suspension
With rapid connector for adjustment
levelling.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
powder-coated. ø 65mm, H 14mm.
Load: 20kg.
12099.000
Hole gauge
for on-site cutting of Monopoll track
and profiles.
Cast aluminium, with hardened sleeve.
?
12499.000
Monopoll Cable
nippers
for shortening the
copper conductors
in Monopoll track.
16910.000
Turnbuckle with
2 clamps
Metal, galvanised.
Load: 60kg.
12440.000
Wire rope
Load: 20kg.
ø 1.75mm, L 10m.
12657.000
Mounting device
for suspension on
connector.
Metal.
12572.000
Mounting device
for suspension on
profile. Profile to
be drilled on-site.
Metal,white.
12567.000
Mounting device
for suspension
on connector.
Metal,white.
12667.000
Wire rope suspension
Wire rope: ø 3mm, L 2,500mm.
Mounting bush: metal.
Canopy: plastic, white, ø 105mm,
H 43mm.
Cable entry for 3x1.5mm² plasticcoated cable or spiral cable.
Strain relief. Terminal block.
Load: 60kg.
www.erco.com
12563.000
Wire rope suspension
With rapid connector for adjustment
levelling. Also for suspension on profile.
Profile to be drilled on-site.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
white powder-coated. ø 65mm,
H 14mm.
Load: 20kg.
12558.000
Wire rope suspension
With single-point fixing. With rapid
connector for adjustment levelling. Also
for suspension on profile. Profile to be
drilled on-site.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
white powder-coated. ø 18mm,
H 49mm.
Load: 20kg (with heavy load dowel).
12557.000
Wire rope suspension
With single-point fixing and rapid connector for adjustment levelling.
Wire rope: ø 1.50mm, L 2,500mm.
Ceiling fixture: cast aluminium/metal,
white powder-coated. ø 18mm,
H 49mm.
Load 20kg (with heavy load dowel).
12681.000
Wire rope suspension
Wire rope: ø 1.50mm, L 2,500mm.
Mounting bush: metal.
Canopy: plastic, white, ø 65mm,
H 63mm.
Cable entry for 3x1.5mm² plasticcoated cable or spiral cable.
Strain relief. Terminal block.
Load: 20kg.
¢
Monopoll track and light structure Accessories
12503.000
Monopoll Intermediate suspension
for 2-lamp luminaires.
Wire rope with mounting bush.
ø 1.50mm, L 2,550mm.
Canopy: metal, white powder-coated.
ø 65mm, H 14mm. Ceiling fixture:
cast aluminium/metal, white powdercoated.
Subsequent installation.
Apollo Theatre in
the SI-Centrum,
Stuttgart. Architect: Schwarz &
Schwarz, Stuttgart/Dresden;
Planungsgruppe
Fiedler, Bielefeld.
Lighting design:
Ingenieurbüro
Scholze, Leinfelden; Gottfried
Schaal, Stuttgart; Lighting
Design Partnership, London.
www.erco.com
ERCO Program 2008/09
121
Spotlights, floodlights and wallwashers for track
Spotlights bring flexible light to architecture: The most important characteristic is mobility, both when positioning
on track and when aligning. Its primary
application is accent lighting. The ERCO
spotlight ranges feature different power
ranges and detailed solutions for each
particular area of application. Each
range consists of luminaires with different beam characteristics, types of lamps
and wattages while the design features remain consistent. A wide range
of accessories is also available.
Cantax
LEDs
Low-voltage halogen lamps
High-pressure discharge lamps
132
132
135
Emanon
LEDs
Low-voltage halogen lamps
High-pressure discharge lamps
153
153
156
Parscan
Low-voltage halogen lamps
R and PAR lamps
High-pressure discharge lamps
183
187
189
191
192
Eclipse
Low-voltage halogen lamps
High-pressure discharge lamps
196
197
199
199
TM Spotlights
Low-voltage halogen lamps
R and PAR lamps
High-pressure discharge lamps
202
203
204
Domotec
R and PAR lamps
210
Quinta
Low-voltage halogen lamps
Tungsten halogen lamps
High-pressure discharge lamps
216
Jilly
122
Low-voltage halogen lamps
Tungsten halogen lamps
R and PAR lamps
High-pressure discharge lamps
Fluorescent lamps
ERCO Program 2008/09
161
165
167
169
214
140
141
143
144
172
173
175
177
222
221
223
227
231
229
230
232
233
www.erco.com
Spotlights, floodlights and wallwashers for track
Pollux
Low-voltage halogen lamps
High-pressure discharge lamps
237
238
Castor
Low-voltage halogen lamps
R and PAR lamps
High-pressure discharge lamps
Fluorescent lamps
244
245
245
Oseris
Low-voltage halogen lamps
High-pressure discharge lamps
250
251
Gimbal
Low-voltage halogen lamps
High-pressure discharge lamps
255
255
Optec
LEDs
Low-voltage halogen lamps
Tungsten halogen lamps
High-pressure discharge lamps
Fluorescent lamps
260
260
Low-voltage halogen lamps
R and PAR lamps
High-pressure discharge lamps
284
285
286
Stella
239
240
241
241
247
247
247
270
267
268
268
263
289
291
271
274
274
275
277
279
292
293
295
New in the program
www.erco.com
Cantax
Emanon
128
147
ERCO Program 2008/09
123
Spotlights, floodlights and wallwashers
The introduction of the track
resulted in a new flexibility in
architectural lighting. Arranging the luminaires is no longer
restricted to individual singlets since power can now be
distri buted along the track. For
changing exhibitions, the luminaires can be easily rearranged
and realigned. If a different light
distribution is required, the spotlight can simply be replaced by
another type of luminaire. The
design of each range of luminaires consists of common features to allow the combination
of spotlights, floodlights and
wallwashers without disturbing
the overall appearance of the
ceiling.
Flexibility
For adjustable focus on exhibits, many spotlights, floodlights
and wallwashers can be rotated
through 360° and tilted by up
to 180°. For accurate alignment,
many luminaires are also provided with an imprinted scale.
DALI-compatible spotlights,
floodlights, and wallwashers with
a factory-set code can be fitted
to the DALI track and individually
dimmed as Light Clients. The luminaires in the Light System DALI
can be controlled centrally via
the Light Studio software. Compared with the 3-circuit installation, the DALI track has the advantage that each luminaire can be
adjusted separately. The control
of luminaires on the track profile
with 3-circuit operation is lim ited
to three different dimmer settings.
124
ERCO Program 2008/09
Lockability
To maintain the luminaire orientation during lamp replacement,
the angle of rotation and tilt of
many luminaires can be locked.
Locking the beam direction
means that the quality of a lighting set-up can be maintained.
Track-mounted
spotlights are the
classical solution
for display lighting, as used in
shop windows.
www.erco.com
Adapters and lighting technology
Taking system design to its
logical conclusion is a characteristic feature of the ERCO spotlight range. We never develop
products in isolation but always
design whole product groups
that are clearly positioned within the well- defined structure of
the overall product range. This
includes using versatile system
accessories to adapt the lighting
tools to suit particular requirements. The ability to interlink
digitally controllable Light Clients
using the Light System DALI and
the incorporation of the Light
Studio software as a user interface for complex luminaire functions is an equally important part
of this concept.
Dimming
Using the integral potentiometer
on the electronic transformer,
the lamp lumens can be freely
dimmed between 100% and 10%.
This allows individual brightness
adjustments without requiring
a lighting control system. When
using different light scenes, a
central control option via a lighting control system proves more
convenient.
3-circuit adapter
The locking lever on the adapter
is used for mechanical mounting
on the track and for making the
electrical connection to the neutral conductor. The rotatable circuit selector switch is then used
to make the electrical connection to the required phase. When
turned 90° to the right or left, the
contact is switched to phase 1 or
2. For phase 3, the selector switch
is pulled out and then turned by
90° to position 3.
DALI adapters
When using a DALI adapter, the
lever is initially locked and then
the necessary contacts for power
and DALI signal are made by
turning the DALI switch. With
the DALI adapter, the voltage is
permanently applied. It is the
DALI signal that first triggers
an action, e.g. switching on a
luminaire.
Transadapters
Luminaires with transformers or
control gear for fluorescent or
high-pressure lamps either have
a transadapter or a DALI transadapter. Every Light Client with
DALI adapter or DALI transadapter
is specially protected against
potential overvoltage associated
with running three circuits.
www.erco.com
Beam angle
To ensure optimal illumination
of both large and small objects,
the spotlights are available with
different beam angles. This allows
designers to select the size that
suits the distance to the object.
The range of beam angles extends
from narrow spot (<10°) to spot
(10°-20°), flood (20°-45°) and
wide flood (>45°).
ERCO Program 2008/09
125
Types of lighting and lighting technology
Spotlights
Spotlights with a narrow to wide
beam, rotationally symmetrical
light distribution are used to
accentuate objects. To ensure
accurate alignment, they can be
rotated and tilted. The light distribution can be individually
adjusted using the lenses available as accessories.
Wallwashers
The characteristic feature of
wallwashers is a light distribu tion which directs the light both
onto vertical surfaces and onto
the area in front of the wall.
Floodlights
Floodlights produce a wide beam
light distribution for uniform
ambient lighting. They are available with a symmetrical or axially
symmetrical light distribution.
Lens wallwashers
The asymmetrical light distribution of the wallwashers ensures a
very uniform wall illumination by
distributing light through a lens.
An additional reflector on the
wallwasher attachment increases
the light in the area at the top
of the wall. The lens wallwashers
can simply be tilted to suit specific wall heights.
Projector spotlights
Spotlights with an additional
lens system are used to project
patterns or shapes through gobos.
They are suitable for decorative
lighting effects as well as for the
projection of text or image information.
Spherolit wallwashers
The asymmetrical light distribution of the Spherolit wallwasher
with Spherolit reflector ensures
a uniform wall illumination with
focal emphasis on the upper
third of the wall. The Spherolit
wallwashers can simply be tilted
to suit specific wall heights.
Luminaires
The luminaires for tracks are
fitted with fluorescent lamps
to produce a wide beam light
distribution for ambient lighting.
Louvres improve the visual comfort when viewed from the side.
126
ERCO Program 2008/09
www.erco.com
Accessories
For optimal adjustment of accent
lighting to suit a particular lighting situation, the spotlights can
be fitted with appropriate accessories. These accessories can be
mounted in two ways: they can
be attached to the luminaire housing or fitted internally. The lenses
or filters are easily and quickly
attached or replaced. Attached
to the outside, the accessories
express the technical design, while
the different lighting technologies
are indicated on the luminaire.
Accessories which
are contained
within the luminaire ensure a
consistent appearance of all luminaires – irrespective of whether or
not they contain
accessories. This
gives the ceiling a
discreet, consistent appearance
with inconspicuous luminaires.
Lenses
Lenses allow the lighting
designer to change the light distribution of luminaires, modify
the beam angle or provide beams
with softer edges. The light spectrum remains unchanged. Softec
lenses used with reflector lamps
eliminate striations, while flood
lenses distribute the light beam
symmetrically. Sculpture lenses
extend the beam along one axis,
while leaving it unchanged on
the other. The oval light pattern
is ideal for the illumination of
sculptures.
www.erco.com
Filters
Filters change the spectrum of
the light. Colour filters are used
for attraction or for decorative
purposes. The effect of correction
filters is rather more subtle. They
can be used to change the light
spectrum to a small degree in
order, for example, to raise the
colour temperature from warm
white to daylight white. In case
of sensitive exhibits, the works
of art can be protected against
harmful spectral components by
using UV and IR filters.
Visual comfort
The fascination of some lighting
installations is their hidden light
sources with appropriately glarefree luminaires and exceptional
visual comfort. Most spotlights
include features to ensure glare
protection. The anti-dazzle cap
attached to the safety glass conceals the lamp from direct view.
The alternative is an internal antidazzle screen which reduces the
glare by obscuring the view of
the reflector and the lamp. Where
special situations require even
higher visual comfort, ERCO provides honeycomb anti-dazzle
screens, anti-dazzle rings or separately adjustable barn doors as
accessories.
ERCO Program 2008/09
127
Cantax for track
The Cantax spotlight range combines advanced lighting technology with a design to produce
distinctive architectural accent
lighting.For these luminaires, the
Japanese designer Naoto Fukasawa
devised stylistic features that are
both elegant and precise and consist of simple geometrical shapes
such as cuboids and cylinders.
The spatial relationships of these
basic shapes, changes depending on use to create an intriguing
architectural impression. Technically, Cantax represents the current
status of development at ERCO
and produces a quality of light
that meets the highest requirements from upmarket residential
to shops, restaurants and galleries.
Lamp options of different wattages
and Spherolit reflectors of different beam angles allow the Cantax
spotlights for low-voltage halogen lamps or metal halide lamps
to be selected for specific lighting tasks. Their reflectors are of the
innovative Spherolit technology
which provides the options of narrow spot, spot, flood, wide flood, or
wallwash characteristics, all from
reflectors of the same size.
The Spherolit reflectors are easily replaced without tools and
allow a change of light distribution
pattern to suit different lighting
tasks. The Spherolit reflector, wallwash, provides a focal emphasis
in the upper third of the wall, for
example, to enhance the visibility of shop displays. To meet the
128
requirement of maximum uniformity and glare control for wallwashing, the Cantax range also includes
lens wallwashers. For accent lighting, Cantax uses high-power LEDs
in varychrome technology for
variable colours of light. The LED
varychrome luminaires have a colour compensation feature to correct the manufacturing tolerances
of the coloured LEDs by calibrating the control gear. As a result,
the same DALI control values will
give the user exactly the same colour of light for all luminaires of a
specific type. The DALI-compatible
luminaires have digital control gear
which can address each luminaire
individually - for instance using
the ERCO Light System DALI with
its integral ERCO Light Studio software.
ERCO Program 2008/09
Combining the
latest developments from
ERCO’s lighting
technology with
the minimalist
design of Naoto
Fukasawa: the
Cantax spotlight
series.
www.erco.com
Cantax for track
The Cantax range consists of spotlights, Spherolit wallwashers and
lens wallwashers in three sizes. The
housings are cast aluminium and
powder-coated black or white. The
electrical connection is made using
a transadapter and the wiring is all
contained internally. DALI-compatible luminaires feature a DALI
transadapter. Amongst the accessories are colour filters and filters
to reduce both IR and UV radiation.
Spotlights
The Cantax spotlights feature
Spherolit reflectors which are easily
replaced without tools and can
produce very narrow to wide light
distribution. In the three sizes,
LEDs in varychrome technology,
low-voltage halogen lamps up to
100W/12V or metal halide lamps
up to 70W are to be used. The
accessories are fitted to the light
heads using a fixing ring.
Application
Very narrow to wide beam, rotationally symmetrical light distribution for accent lighting in
museums, exhibitions, art galleries as well as sales and promotional
areas.
Spherolit wallwashers
With Spherolit technology for wallwashing, the reflectors are formed
to produce an asymmetrical light
distribution for wallwashing with
focal emphasis in the upper area of
the wall. The Spherolit wallwashers
are available for low-voltage halogen lamps up to 100W/12V and
metal halide lamps up to 70W.
Application
Asymmetrical light distribution for
wallwashing with focal emphasis
in the upper area especially of high
walls, for applications including
sales and promotional areas.
Lens wallwashers
The uniform wallwashing of the
lens wallwasher, which meet
extremely high standards of glare
control, is ensured by the typical
ERCO wallwasher reflector. The
lens wallwashers are available for
low-voltage halogen lamps up to
100W/12V and metal halide lamps
up to 70W.
Application
Asymmetrical light distribution for
extremely uniform wallwashing
especially of high walls, for applications including museums, exhibitions and art galleries.
www.erco.com
ERCO Program 2008/09
129
Cantax for track
The design of Cantax is characterised by a reduction to cubic
forms, clear lines and the contrast
of cuboid and cylinder. The concept devised by designer Naoto
Fukasawa distinctly embodies
the Japanese tradition with its
minimalist approach and precision. The light head and bracket
are flush with the transadapter
for track mounting. Within the
simple form there is control gear
with coded information for convenient operation using Light
System DALI.
Four Spherolit
reflectors with
narrow spot,
spot, flood and
wide flood beam
angles are available for accent
lighting.
The innovative
and patented
Spherolit reflectors are ideal
to produce brilliant light with
a highly uniform
brightness pattern. Their surfaces consists of
computer-calculated, spherically
domed segments.
130
Alternatively
to the spotlight
reflector, the
Spherolit reflector, wallwash, can
be used for vertical illumination.
The slight focal
emphasis noticeable in the upper
third serves as
additional accent
lighting. The task
of a spotlight can
thus alternate
The Spherolit
reflectors can easily be exchanged
without tools. This
means that the
user can change
the reflector with
safety glass to suit
different lighting
tasks.
ERCO Program 2008/09
between accent
lighting and wallwashing to suit
the situation.
The low-voltage
transadapter can
be dimmed using
trailing-edge
technology dimmers. A potentiometer allows
the spotlight to be
adjusted directly
on the luminaire.
The LED function
indicator shows
that the luminaire
is operating correctly.
www.erco.com
Cantax for track
LED varychrome spotlight
The coloured light of this Cantax
spotlight is created by twelve
high-power LEDs. The Softec
lens ensures full mixing of the
red, green and blue light colours.
The narrow beam light distribution of the spot reflector lens system allows coloured highlighting
with high colour saturation. The
LED varychrome luminaires have
a colour compensation feature to
correct the manufacturing tolerances of the coloured LEDs by
calibrating the LED module. As a
result, the same DALI control values will give the user exactly the
same colour of light for all luminaires of a specific type.
S (%)
100
S (%)
622
465
90
80
527
70
60
506
50
40
30
The DALI-compatible luminaires
have digital control gear which
allows each lumi naire to be individually addressed,
for example by
using the ERCO
Light System
DALI with integral ERCO Light
Studio software.
Because ERCO
uses LEDs with an
extremely high
colour saturation
in the Varychrome
luminaires, a particularly wide
range of colours
can be obtained.
The saturation
diagram shows
the mixed colours
as wavelength >
with the saturation given as a
percentage.
ERCO’s varychrome LED
luminaires have
been optimised
to produce high
luminous flux
with highly saturated light colours.
The luminous flux
diagram indicates
the output of
the LED module
with respect to
the wavelength.
20
10
> (nm)
780
0
380
300
480
490
500
510
530
555
575
600
(lm)
> (nm)
-569
-493
(lm)
250
583
200
478
150
-561
527
100
622
50
465
0
380
480
490
500
510
530
Like other lamps, high-power
LEDs generate heat. To prevent
the luminous flux and life of the
lamp from decreasing drastically,
the maximum junction temperature must not be exceeded even
during continuous operation.
ERCO places particular importance on heat management in
its luminaires to ensure that the
LED modules remain below the
critical temperature range and
operate at full output through-
www.erco.com
555
575
600
> (nm)
780
-493
> (nm)
-569
out their lives. Mounting the
LED module directly on metalcore PCBs effectively dissipates
the heat to the luminaire housing. The form, design and material of the housing all contribute
to effective heat management.
Extensive simulations and tests
in the development phase ensure
the success of the production
procedures used.
ERCO Program 2008/09
131
Cantax Spotlight varychrome LED with DALI transadapter
$!,)
161
237
h(m)
125
75696.000 White (RAL9002) LED red,
green, blue DALI
75697.000 Black LED red, green, blue
DALI
LED 13W 390lm
Version 1
Colour compensation for precise light
colour.
Weight 2.10kg LMF D
Accessories page 138
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Peripheral groove for fixing accessories.
Bracket on DALI transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO DALI transadapter for DALI track:
plastic.
Electronic control gear for ERCO
Varychrome colour mixing.
Replaceable LED module: high-power
LEDs on metallic core PCB with lens
system.
Anti-dazzle ring: cast aluminium, black
powder-coated. Softec lens.
100
174
60°
LED
30°
60°
4000 cd
30°
1
2
3
4
5
E(lx) D(m)
13°
3188 0.23
797 0.46
354 0.68
199 0.91
128 1.14
Primary colours LED module
Luminous flux F(lm)
Dominant wavelength l(nm)
Colour saturation S(%)
Colour
Red
Green
Blue
F(lm)
140
184
64
l(nm)
620-625
525-530
465-470
S(%)
99
77
97
Cantax Spotlight with transadapter for low-voltage halogen lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on transadapter rotatable
through 360°. Internal wiring.
ERCO transadapter for 3-circuit
track: plastic. Electronic transformer
220-240/12V. Potentiometer for
brightness control 10%-100%. LED
function indicator. Circuit pre-selection.
Anti-dazzle cone: aluminium, black
powder-coated. Softec lens.
Use dimmers for electronic transformers
(trailing edge).
ig
h(m)
75650.000 White (RAL9002)
75651.000 Black
QR-CBC51-RE 50W 12V GU5.3 10°
QR-CBC51-RE 50W 12V GU5.3 60°
Weight 0.60kg LMF E
60°
QR-CBC51-RE
30°
60°
15000 cd
30°
1
2
3
4
5
h(m)
60°
QR-CBC51-RE
132
ERCO Program 2008/09
30°
60°
2000 cd
30°
1
2
3
4
5
E(lx) D(m)
10°
13500 0.17
3375 0.35
1500 0.52
844 0.70
540 0.87
E(lx) D(m)
60°
1287 1.15
322 2.31
143 3.46
80 4.62
51 5.77
www.erco.com
Cantax Spotlight with transadapter for low-voltage halogen lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Peripheral groove for fixing accessories. Bracket on transadapter rotatable through 360°. Internal wiring.
ERCO transadapter for 3-circuit
track: plastic. Electronic transformer
220-240/12V. Potentiometer for
brightness control 10%-100%. LED
function indicator. Circuit pre-selection.
Anti-dazzle ring: cast aluminium,
black powder-coated. Anti-dazzle cap
attached to safety glass.
Reflector replacement without tools.
h(m)
75652.000 White (RAL9002)
75657.000 Black
QT12-ax-RE 50W 12V GY6.35 1250lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 0.82kg LMF D
i
60°
QT12-ax-RE
30°
60°
20000 cd
30°
i
60°
QT12-ax-RE
30°
60°
9000 cd
30°
i
60°
QT12-ax-RE
30°
60°
2500 cd
30°
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Peripheral groove for fixing accessories. Bracket on transadapter rotatable through 360°. Internal wiring.
Only for ceiling mounting.
ERCO transadapter for 3-circuit track:
plastic. Electronic transformer 240/12V.
Potentiometer for brightness control
10%-100%. LED function indicator. Circuit pre-selection.
Anti-dazzle ring: cast aluminium, black
powder-coated.
Reflector replacement without tools.
www.erco.com
1
2
3
4
5
h(m)
75654.000 White (RAL9002)
75659.000 Black
QT12-ax-RE 50W 12V GY6.35 1250lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 0.82kg LMF D
1
2
3
4
5
60°
QT12-ax-LP
30°
60°
60000 cd
30°
1
2
3
4
5
h(m)
60°
QT12-ax-LP
30°
60°
20000 cd
30°
E(lx) D(m)
9°
16041 0.16
4010 0.31
1782 0.47
1003 0.63
642 0.79
E(lx) D(m)
15°
7064 0.26
1766 0.53
785 0.79
441 1.05
283 1.32
E(lx) D(m)
31°
1796 0.55
449 1.11
200 1.66
112 2.22
72 2.77
Use dimmers for electronic transformers
(trailing edge).
Accessories page 138
h(m)
75663.006 White (RAL9002)
75668.006 Black
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, spot: aluminium, silver, mirror-finish anodised. Anti-dazzle
cap attached to safety glass.
Weight 1.55kg LMF D
1
2
3
4
5
h(m)
75653.000 White (RAL9002)
75658.000 Black
QT12-ax-RE 50W 12V GY6.35 1250lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 0.82kg LMF D
75662.006 White (RAL9002)
75667.006 Black
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Anti-dazzle cap attached to safety
glass.
Weight 1.55kg LMF D
Use dimmers for electronic transformers
(trailing edge).
Accessories page 139
1
2
3
4
5
E(lx) D(m)
7°
54234 0.12
13559 0.24
6026 0.37
3390 0.49
2169 0.61
E(lx) D(m)
14°
15709 0.25
3927 0.49
1745 0.74
982 0.98
628 1.23
ERCO Program 2008/09
133
Cantax Spotlight with transadapter for low-voltage halogen lamps
h(m)
75664.006 White (RAL9002)
75669.006 Black
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised. Antidazzle cap attached to safety glass.
Weight 1.55kg
60°
QT12-ax-LP
30°
60°
6000 cd
30°
1
2
3
4
5
h(m)
75665.006 White (RAL9002)
75670.006 Black
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Safety glass.
Weight 1.55kg LMF D
60°
QT12-ax-LP
30°
60°
2500 cd
30°
1
2
3
4
5
E(lx) D(m)
29°
4573 0.52
1143 1.03
508 1.55
286 2.07
183 2.59
E(lx) D(m)
53°
1761 1.00
440 1.99
196 2.99
110 3.99
70 4.99
Cantax Spotlight with DALI transadapter for low-voltage halogen lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Peripheral groove for fixing accessories.
Bracket on DALI transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO DALI transadapter for DALI track:
plastic. Electronic transformer 230/240/
12V.
Anti-dazzle ring: cast aluminium, black
powder-coated.
Reflector replacement without tools.
Accessories page 138
$!,)
134
ERCO Program 2008/09
60°
QT12-ax-LP
30°
60°
60000 cd
30°
1
2
3
4
5
h(m)
75673.000 White (RAL9002) DALI
75678.000 Black DALI
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, spot: aluminium, silver, mirror-finish anodised. Anti-dazzle
cap attached to safety glass.
Weight 1.60kg LMF D
h(m)
75672.000 White (RAL9002) DALI
75677.000 Black DALI
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Anti-dazzle cap attached to safety
glass.
Weight 1.60kg LMF D
60°
QT12-ax-LP
30°
60°
20000 cd
30°
1
2
3
4
5
E(lx) D(m)
7°
54234 0.12
13559 0.24
6026 0.37
3390 0.49
2169 0.61
E(lx) D(m)
14°
15709 0.25
3927 0.49
1745 0.74
982 0.98
628 1.23
www.erco.com
Cantax Spotlight with DALI transadapter for low-voltage halogen lamps
60°
QT12-ax-LP
30°
60°
6000 cd
30°
1
2
3
4
5
h(m)
75675.000 White (RAL9002) DALI
75680.000 Black DALI
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Safety glass.
Weight 1.60kg LMF D
h(m)
75674.000 White (RAL9002) DALI
75679.000 Black DALI
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised. Antidazzle cap attached to safety glass.
Weight 1.60kg LMF D
60°
QT12-ax-LP
30°
60°
2500 cd
30°
1
2
3
4
5
E(lx) D(m)
29°
4573 0.52
1143 1.03
508 1.55
286 2.07
183 2.59
E(lx) D(m)
53°
1761 1.00
440 1.99
196 2.99
110 3.99
70 4.99
Cantax Spotlight with transadapter for metal halide lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Peripheral groove for fixing accessories. Bracket on transadapter rotatable through 360°. Internal wiring.
ERCO transadapter for 3-circuit track:
plastic. Electronic control gear. Circuit
pre-selection.
Anti-dazzle ring: cast aluminium, black
powder-coated. Safety glass.
Reflector replacement without tools.
Accessories page 139
i
i
www.erco.com
HIT-TC-CE
30°
60°
27000 cd
30°
1
2
3
4
5
60°
HIT-TC-CE
30°
60°
12500 cd
30°
1
2
3
4
5
h(m)
i
60°
HIT-TC-CE
30°
60°
4000 cd
30°
1
2
3
4
5
h(m)
75603.000 White (RAL9002) ECG
75608.000 Black ECG
HIT-TC-CE 20W PGJ5 1650lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Weight 0.80kg LMF D
60°
h(m)
i
75602.000 White (RAL9002) ECG
75607.000 Black ECG
HIT-TC-CE 20W PGJ5 1650lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 0.80kg LMF D
75601.000 White (RAL9002) ECG
75606.000 Black ECG
HIT-TC-CE 20W PGJ5 1650lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 0.80kg LMF D
h(m)
75600.000 White (RAL9002) ECG
75605.000 Black ECG
HIT-TC-CE 20W PGJ5 1650lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 0.80kg LMF D
60°
HIT-TC-CE
30°
60°
2000 cd
30°
1
2
3
4
5
E(lx) D(m)
9°
23122 0.16
5781 0.31
2569 0.47
1445 0.63
925 0.79
E(lx) D(m)
15°
9795 0.26
2449 0.53
1088 0.79
612 1.05
392 1.32
E(lx) D(m)
31°
2837 0.55
709 1.11
315 1.66
177 2.22
113 2.77
E(lx) D(m)
49°
1323 0.91
331 1.82
147 2.73
83 3.65
53 4.56
ERCO Program 2008/09
135
Cantax Spotlight with transadapter for metal halide lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Peripheral groove for fixing accessories. Bracket on transadapter rotatable through 360°. Internal wiring.
Only for ceiling mounting.
ERCO transadapter for 3-circuit track:
plastic. Electronic control gear. Circuit
pre-selection.
Anti-dazzle ring: cast aluminium, black
powder-coated. Safety glass.
Reflector replacement without tools.
Accessories page 138
75623.000 White (RAL9002) ECG
75628.000 Black ECG
HIT-CE 70W G12 6600lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Weight 1.90kg LMF D
136
ERCO Program 2008/09
30°
60°
80000 cd
60°
HIT-CE
30°
30°
60°
25000 cd
1
2
3
4
5
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
8000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
3000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
80000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
40000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
15000 cd
30°
1
2
3
4
5
h(m)
75622.000 White (RAL9002) ECG
75627.000 Black ECG
HIT-CE 70W G12 6600lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 1.90kg LMF D
HIT-CE
75621.000 White (RAL9002) ECG
75626.000 Black ECG
HIT-CE 70W G12 6600lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 1.90kg LMF D
75620.000 White (RAL9002) ECG
75625.000 Black ECG
HIT-CE 70W G12 6600lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 1.90kg LMF D
60°
h(m)
75613.000 White (RAL9002) ECG
75618.000 Black ECG
HIT-CE 35W G12 3300lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Weight 1.90kg LMF D
75612.000 White (RAL9002) ECG
75617.000 Black ECG
HIT-CE 35W G12 3300lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 1.90kg LMF D
75611.000 White (RAL9002) ECG
75616.000 Black ECG
HIT-CE 35W G12 3300lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 1.90kg LMF D
h(m)
75610.000 White (RAL9002) ECG
75615.000 Black ECG
HIT-CE 35W G12 3300lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 1.90kg LMF D
60°
HIT-CE
30°
60°
6000 cd
30°
1
2
3
4
5
E(lx) D(m)
7°
67104 0.12
16776 0.24
7456 0.37
4194 0.49
2684 0.61
E(lx) D(m)
16°
19218 0.28
4805 0.56
2135 0.84
1201 1.12
769 1.41
E(lx) D(m)
31°
5561 0.55
1390 1.11
618 1.66
348 2.22
222 2.77
E(lx) D(m)
58°
1.11
2.22
3.33
4.43
5.54
1956
489
217
122
78
E(lx) D(m)
10°
68629 0.17
17157 0.35
7625 0.52
4289 0.70
2745 0.87
E(lx) D(m)
17°
32850 0.30
8213 0.60
3650 0.90
2053 1.20
1314 1.49
E(lx) D(m)
31°
11279 0.55
2820 1.11
1253 1.66
705 2.22
451 2.77
E(lx) D(m)
55°
4196 1.04
1049 2.08
466 3.12
262 4.16
168 5.21
www.erco.com
Cantax Spotlight with DALI transadapter for metal halide lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Peripheral groove for fixing accessories.
Bracket on DALI transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO DALI transadapter for DALI track:
plastic. Electronic control gear, switchable.
Anti-dazzle ring: cast aluminium, black
powder-coated. Safety glass.
Reflector replacement without tools.
Accessories page 138
$!,)
www.erco.com
60°
HIT-CE
30°
60°
80000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
25000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
8000 cd
30°
1
2
3
4
5
h(m)
75643.000 White (RAL9002) ECG DALI
75648.000 Black ECG DALI
HIT-CE 35W G12 3300lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Weight 1.90kg LMF D
75642.000 White (RAL9002) ECG DALI
75647.000 Black ECG DALI
HIT-CE 35W G12 3300lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 1.90kg LMF D
75641.000 White (RAL9002) ECG DALI
75646.000 Black ECG DALI
HIT-CE 35W G12 3300lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 1.90kg LMF D
h(m)
75640.000 White (RAL9002) ECG DALI
75645.000 Black ECG DALI
HIT-CE 35W G12 3300lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 1.90kg LMF D
60°
HIT-CE
30°
60°
3000 cd
30°
1
2
3
4
5
E(lx) D(m)
7°
67104 0.12
16776 0.24
7456 0.37
4194 0.49
2684 0.61
E(lx) D(m)
16°
19218 0.28
4805 0.56
2135 0.84
1201 1.12
769 1.41
E(lx) D(m)
31°
5561 0.55
1390 1.11
618 1.66
348 2.22
222 2.77
E(lx) D(m)
58°
1.11
2.22
3.33
4.43
5.54
1956
489
217
122
78
ERCO Program 2008/09
137
70
9
70 66.0
98 00
70 6.00
9 0
70 67.0
98 00
70 7.00
9 0
70 68.0
98 00
70 8.00
9 0
70 69.0
98 00
70 9.00
9 0
70 70.0
99 00
0.0
75 00
93
5.0
75 00
9
75 41.0
94 00
75 0.00
8 0
75 01.0
90 00
6.0
75 00
90
5.0
00
74
82
0.0
00
74
82
5.0
74 00
80
74 6.0
80 00
74 5.00
4 0
74 86.0
48 00
7.0
74 00
45
1.0
00
74
45
2.0
00
74
45
3.0
00
74
45
4.0
00
Cantax Accessories
75610.000
75611.000
75612.000
75613.000
75615.000
75616.000
75617.000
75618.000
75620.000
75621.000
75622.000
75623.000
75625.000
75626.000
75627.000
75628.000
75640.000
75641.000
75642.000
75643.000
75645.000
75646.000
75647.000
75648.000
75662.006
75663.006
75664.006
75665.006
75667.006
75668.006
75669.006
75670.006
75672.000
75673.000
75674.000
75675.000
75677.000
75678.000
75679.000
75680.000
75696.000
75697.000
138
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ERCO Program 2008/09
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
www.erco.com
70
9
70 56.0
95 00
70 7.00
9 0
70 58.0
95 00
9.0
70 00
96
0.0
00
75
82
5.0
75 00
83
75 1.0
83 00
0.0
75 00
80
1.0
00
75
80
0.0
00
74
42
0.0
00
74
42
5.0
00
74
40
6.0
00
74
40
5.0
00
74
48
4.0
00
74
48
5.0
00
74
44
7.0
00
74
44
8.0
00
74
44
9.0
00
74
45
0.0
00
Cantax Accessories
75600.000
75601.000
75602.000
75603.000
75605.000
75606.000
75607.000
75608.000
75652.000
75653.000
75654.000
75657.000
75658.000
75659.000
•
•
• •
• •
•
•
• •
• •
•
•
• •
•
•
• •
• •
• •
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
70956.000
70966.000
Spherolit reflector,
narrow spot
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Anti-dazzle cap
attached to safety
glass.
70986.000
Spherolit reflector,
narrow spot
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Safety glass.
70957.000
70967.000
Spherolit reflector,
spot
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Anti-dazzle cap
attached to safety
glass.
70987.000
Spherolit reflector,
spot
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Safety glass.
70958.000
70968.000
Spherolit reflector,
flood
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Anti-dazzle cap
attached to safety
glass.
70988.000
Spherolit reflector,
flood
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Safety glass.
70959.000
70969.000
70989.000
Spherolit reflector,
wide flood
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Safety glass.
70960.000
70970.000
70990.000
Spherolit reflector,
wallwash
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Softec lens.
74420.000
74820.000
Sculpture lens
74425.000
74825.000
Flood lens
74406.000
74806.000
UV filter
74405.000
74805.000
IR filter
74484.000
74486.000
Skintone filter
74485.000
74487.000
Daylight conversion filter
74447.000
74451.000
Interference colour filter
Magenta
74448.000
74452.000
Interference colour filter
Amber
www.erco.com
ERCO Program 2008/09
139
Cantax Accessories
74449.000
74453.000
Interference colour filter
Sky blue
74450.000
74454.000
Interference colour filter
Night blue
75825.000
75935.000
Anti-dazzle ring
Plastic, black.
75831.000 White
75941.000 White
75830.000 Black
75940.000 Black
Barn doors
Metal, powdercoated.
75801.000 White
75906.000 White
75800.000 Black
75905.000 Black
Mounting ring
Plastic.
Cantax Spherolit wallwasher with transadapter for low-voltage halogen lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on transadapter rotatable
through 360°. Internal wiring.
ERCO transadapter for 3-circuit
track: plastic. Electronic transformer
220-240/12V. Potentiometer for
brightness control 10%-100%. LED
function indicator. Circuit pre-selection.
Spherolit wallwasher reflector replaceable without tools: Aluminium, silver,
mirror-finish anodised. Softec lens.
Anti-dazzle ring: cast aluminium, black
powder-coated.
i
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
75656.000 White (RAL9002)
75661.000 Black
QT12-ax-RE 50W 12V GY6.35 1250lm
Weight 0.82kg LMF D
Use dimmers for electronic transformers
(trailing edge).
QT12-ax-RE
Angle of tilt 22°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO transadapter for 3-circuit track:
plastic. Electronic transformer 240/12V.
Potentiometer for brightness control
10%-100%. LED function indicator. Circuit pre-selection.
Spherolit wallwasher reflector replaceable without tools: Aluminium, silver,
mirror-finish anodised. Softec lens.
Anti-dazzle ring: cast aluminium, black
powder-coated.
ERCO Program 2008/09
1.50
1.50
75
Use dimmers for electronic transformers
(trailing edge).
QT12-ax-LP
Angle of tilt 20°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
140
1.25
1.25
108
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
75666.006 White (RAL9002)
75671.006 Black
QT12-ax-LP 100W 12V GY6.35 2200lm
Weight 1.55kg LMF D
4.0
1.00
1.00
156
6.0
1.50
1.50
142
1.75
1.75
110
2.00
2.00
86
www.erco.com
Cantax Spherolit wallwasher with DALI transadapter for low-voltage halogen lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on DALI transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO DALI transadapter for DALI track:
plastic. Electronic transformer 230/240/
12V.
Spherolit wallwasher reflector replaceable without tools: Aluminium, silver,
mirror-finish anodised. Softec lens.
Anti-dazzle ring: cast aluminium, black
powder-coated.
75676.000 White (RAL9002) DALI
75681.000 Black DALI
QT12-ax-LP 100W 12V GY6.35 2200lm
Weight 1.60kg LMF D
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
$!,)
QT12-ax-LP
Angle of tilt 20°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
6.0
1.50
1.50
142
1.75
1.75
110
2.00
2.00
86
4.0
1.00
1.00
216
1.25
1.25
151
1.50
1.50
108
Cantax Spherolit wallwasher with transadapter for metal halide lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on transadapter rotatable
through 360°. Internal wiring.
ERCO transadapter for 3-circuit track:
plastic. Electronic control gear. Circuit
pre-selection.
Spherolit wallwasher reflector replaceable without tools: Aluminium, silver,
mirror-finish anodised. Softec lens.
Anti-dazzle ring: cast aluminium, black
powder-coated.
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
i
75604.000 White (RAL9002) ECG
75609.000 Black ECG
HIT-TC-CE 20W PGJ5 1650lm
Weight 0.80kg LMF D
HIT-TC-CE
Angle of tilt 22°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
www.erco.com
ERCO Program 2008/09
141
Cantax Spherolit wallwasher with transadapter for metal halide lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO transadapter for 3-circuit track:
plastic. Electronic control gear. Circuit
pre-selection.
Spherolit wallwasher reflector replaceable without tools: Aluminium, silver,
mirror-finish anodised. Softec lens.
Anti-dazzle ring: cast aluminium, black
powder-coated.
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
75614.000 White (RAL9002) ECG
75619.000 Black ECG
HIT-CE 35W G12 3300lm
Weight 1.90kg LMF D
HIT-CE
Angle of tilt 20°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
1.75
1.75
138
2.00
2.00
111
8.0
1.75
1.75
183
2.00
2.00
150
2.25
2.25
123
6.0
1.50
1.50
174
1.75
1.75
138
2.00
2.00
111
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
75624.000 White (RAL9002) ECG
75629.000 Black ECG
HIT-CE 70W G12 6600lm
Weight 1.90kg LMF D
6.0
1.50
1.50
174
HIT-CE
Angle of tilt 15°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
Cantax Spherolit wallwasher with DALI transadapter for metal halide lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on DALI transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO DALI transadapter for DALI track:
plastic. Electronic control gear, switchable.
Spherolit wallwasher reflector replaceable without tools: Aluminium, silver,
mirror-finish anodised. Softec lens.
Anti-dazzle ring: cast aluminium, black
powder-coated.
75644.000 White (RAL9002) ECG DALI
75649.000 Black ECG DALI
HIT-CE 35W G12 3300lm
Weight 1.90kg LMF D
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
$!,)
HIT-CE
Angle of tilt 20°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
142
ERCO Program 2008/09
www.erco.com
Cantax Lens wallwasher with transadapter for low-voltage halogen lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO transadapter for 3-circuit
track: plastic. Electronic transformer
220-240/12V. Potentiometer for
brightness control 10%-100%. LED
function indicator. Circuit pre-selection.
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Wallwasher attachment: cast aluminium, powder-coated. Spread lens with
reflector: aluminium, silver anodised.
i
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
75682.000 White (RAL9002)
75683.000 Black
QT12-ax-RE 50W 12V GY6.35 1250lm
Weight 1.12kg LMF D
Use dimmers for electronic transformers
(trailing edge).
Accessories page 146
QT12-ax-RE
Angle of tilt 20°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO transadapter for 3-circuit track:
plastic. Electronic transformer 240/12V.
Potentiometer for brightness control
10%-100%. LED function indicator. Circuit pre-selection.
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Wallwasher attachment: cast aluminium, powder-coated. Spread lens with
reflector: aluminium, silver anodised.
1.25
1.25
98
1.25
1.50
82
Use dimmers for electronic transformers
(trailing edge).
Accessories page 146
QT12-ax-LP
Angle of tilt 15°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
www.erco.com
1.00
1.25
116
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
75684.006 White (RAL9002)
75685.006 Black
QT12-ax-LP 100W 12V GY6.35 2200lm
Weight 2.01kg LMF D
3.0
1.00
1.00
144
4.0
1.00
1.00
227
1.00
1.25
183
ERCO Program 2008/09
1.25
1.25
157
1.25
1.50
131
143
Cantax Lens wallwasher with DALI transadapter for low-voltage halogen lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on DALI transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO DALI transadapter for DALI track:
plastic. Electronic transformer 230/240/
12V.
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Wallwasher attachment: cast aluminium, powder-coated. Spread lens with
reflector: aluminium, silver anodised.
Accessories page 146
75686.000 White (RAL9002) DALI
75687.000 Black DALI
QT12-ax-LP 100W 12V GY6.35 2200lm
Weight 2.06kg LMF D
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
$!,)
QT12-ax-LP
Angle of tilt 15°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
4.0
1.00
1.00
227
1.00
1.25
183
1.25
1.25
157
1.25
1.50
131
1.00
1.25
77
1.25
1.25
64
1.25
1.50
53
Cantax Lens wallwasher with transadapter for metal halide lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO transadapter for 3-circuit track:
plastic. Electronic control gear. Circuit
pre-selection.
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Wallwasher attachment: cast aluminium, powder-coated. Spread lens with
reflector: aluminium, silver anodised.
Accessories page 146
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
i
75688.000 White (RAL9002) ECG
75689.000 Black ECG
HIT-TC-CE 20W PGJ5 1650lm
Weight 1.10kg LMF D
HIT-TC-CE
Angle of tilt 20°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
144
ERCO Program 2008/09
3.0
1.00
1.00
96
www.erco.com
Cantax Lens wallwasher with transadapter for metal halide lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO transadapter for 3-circuit track:
plastic. Electronic control gear. Circuit
pre-selection.
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Wallwasher attachment: cast aluminium, powder-coated. Spread lens with
reflector: aluminium, silver anodised.
Accessories page 146
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
75690.000 White (RAL9002) ECG
75691.000 Black ECG
HIT-CE 35W G12 3300lm
Weight 2.36kg LMF D
HIT-CE
Angle of tilt 15°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
1.00
1.25
197
1.25
1.25
166
1.25
1.50
139
1.25
1.50
211
1.50
1.50
191
1.50
1.75
164
1.00
1.25
197
1.25
1.25
166
1.25
1.50
139
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
75694.000 White (RAL9002) ECG
75695.000 Black ECG
HIT-CE 70W G12 6600lm
Weight 2.36kg LMF D
4.0
1.00
1.00
245
HIT-CE
Angle of tilt 15°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
6.0
1.25
1.25
251
Cantax Lens wallwasher with DALI transadapter for metal halide lamps
Cubic housing and bracket: cast aluminium, powder-coated. 0°-90° tilt.
Bracket on DALI transadapter rotatable
through 360°. Internal wiring.
Only for ceiling mounting.
ERCO DALI transadapter for DALI track:
plastic. Electronic control gear, switchable.
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Wallwasher attachment: cast aluminium, powder-coated. Spread lens with
reflector: aluminium, silver anodised.
Accessories page 146
75692.000 White (RAL9002) ECG DALI
75693.000 Black ECG DALI
HIT-CE 35W G12 3300lm
Weight 2.36kg LMF D
Mean illuminance En (lx)
Specifications:
Number of luminaires n > 5
Without maintenance factor
Without indirect component
Without peripheral area
$!,)
HIT-CE
Angle of tilt 15°
Wall height (m)
Offset from wall (m)
Luminaire spacing (m)
Illuminance En (lx)
www.erco.com
4.0
1.00
1.00
245
ERCO Program 2008/09
145
70
68
8 .0
00
77
19
8 .0
00
70
68
9 .0
00
77
19
6 .0
00
74
48
2 .0
00
74
48
8 .0
00
74
48
3 .0
00
74
48
9 .0
00
74
43
1 .0
00
74
45
5 .0
00
74
43
2 .0
00
74
45
6 .0
00
74
43
3 .0
00
74
45
7 .0
00
74
43
4 .0
00
74
45
8 .0
00
Cantax Accessories
75682.000
75683.000
75684.006
75685.006
75686.000
75687.000
75688.000
75689.000
75690.000
75691.000
75692.000
75693.000
75694.000
75695.000
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
70689.000
77196.000
IR filter
146
ERCO Program 2008/09
•
•
•
•
•
•
•
•
•
•
•
•
70688.000
77198.000
UV filter
•
•
74482.000
74488.000
Skintone filter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
74483.000
74489.000
Daylight conversion filter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
74431.000
74455.000
Interference colour filter
Magenta
•
•
•
•
•
•
•
•
•
•
•
•
74432.000
74456.000
Interference colour filter
Amber
•
•
•
•
•
•
74433.000
74457.000
Interference colour filter
Sky blue
74434.000
74458.000
Interference colour filter
Night blue
www.erco.com
Emanon for track
Light used as a component of
design has long been used to produce effective highlights particularly in the retail sector. Lighting
equipment such as the Emanon
range of spotlights combine innovative lighting technology with
digital control electronics resulting in an entirely new, creative
scope for scenographic lighting
concepts. Shops and shop windows
become a stage with possibilities
previously the reserve of event and
show lighting: Emanon includes a
variety of spotlights with different beam angles and a wide range
of accessories, along with highquality wallwashers, LED varychrome luminaires, and projection
spotlights. As an exceptional feature in the ERCO Program, even
digitally addressable Goborotators for dynamic projection effects
are available. The distinct integral
shape which is characteristic of all
Emanon spotlights is the brainchild
of designer Ives Béhar. The consistent element is a lighting technology module of cast aluminium. This is thermally separated
from the electronic control gear
and contained in housings made
of two plastic shells. The structured
surface indicates that the spotlights can be touched and aligned
without a problem even when in
operation. Optimal heat dissipation is ensured by the concentric ventilation slots on the back
of the housing. Lamp options of
different wattages and Spherolit
www.erco.com
reflectors of different beam angles
make the Emanon spotlights for
low-voltage halogen lamps and
metal halide lamps ideal for specific lighting tasks. Their reflectors feature the innovative Spherolit technology that provides the
option of narrow spot, spot, flood,
wide-flood or wallwash characteristics all from reflectors of the
same size. The Spherolit reflectors
are easily replaced without tools
meaning that the light distribution
patterns can be changed to suit
various lighting tasks.
The Spherolit reflector, wallwash, produces a focal emphasis
in the upper third of the wall, for
example, to enhance the visibility of shop displays. To meet the
requirement of maximum uniformity and glare control for wallwashing, the Emanon range also
includes lens wallwashers. For
accent lighting, Cantax uses highpower LEDs in varychrome technology for variable colours of light.
The LED varychrome luminaires
have a colour compensation feature to correct the manufacturing
tolerances of the coloured LEDs
by calibrating the control gear.
As a result, the same DALI control
values will give the user exactly
the same colour of light from all
luminaires of a specific type. The
Emanon projection spotlights are
available with two light distribution patterns for different applications. One of the special features in
the Emanon range are the Goboro-
tators for scenographic lighting
concepts with dynamic projections.
The overlapping of two rotating
gobo motifs with a different sharpness and speed produces fascinating lighting effects. Vibrationfree motor bearings and toothed
belt drives ensure a low-noise, lowmaintenance operation. This makes
qualifies the Goborotator ideal for
continuous use in architectural
applications. The DALI-compatible luminaires feature digitally
addressable control gear, which can
be individually addressed to each
luminaire separately, for example
when using the ERCO Light System
DALI and the integrated ERCO Light
Studio software.
ERCO Program 2008/09
The spotlights,
projectors and
Goborotators
of the Emanon
product group
provide retail
architecture with
lighting effects fit
for the stage.
147
Emanon for track
The Emanon range consists of
spotlights, projection spotlights,
Spherolit wallwashers and lens
wallwashers in two sizes. The housings are of high-quality white
plastic or with a silver coating. The
electrical connection is made using
a 3-circuit adapter or DALI adapter
and the wiring is all contained
internally. The necessary control
gear is integrated into the spotlight. Amongst the accessories are
colour filters and filters to reduce
both IR and UV radiation.
Spotlights
The Emanon spotlights Spherolit reflectors are easily replaced
without tools and have a very narrow to wide light distribution.
Depending on their lamps, the
luminaires are available in two
sizes. LEDs in varychrome technology, low-voltage halogen lamps up
to 100W/12V or metal halide lamps
up to 150W are to be used. The
accessories are fitted to the light
heads using a fixing ring.
Application
Very narrow to wide beam, rotationally symmetrical light distribution for accent lighting in
museums, exhibitions, art galleries
as well as sales areas and promotional areas.
Projector spotlights
Two optical systems with and
without Goborotator are available
for different projection applications. The projection spotlight with
optical projection system has three
lenses for precise gobo images with
a medium beam light distribution.
The projection spotlight with
optical imaging system has one
lens with a wide beam angle for
soft-edged lighting effects using
gobos. In the version without
the Goborotator, four framing
blades can shape the projection
to a square. The Goborotator
has two separately addressable
motors on vibration-free bearings
to rotate the gobos at speeds of
four seconds to six minutes per
revolution. Control is possible using
either the rotary switch on the
luminaire to recall 12 predefined
programs, or in the DALI version via
the Light Studio software.
Application
Accent effects can be produced by
using individually adjustable, hardedged beams or rectangular image
mask projections. Alternatively projection of rotating gobos for precise images or soft-edged lighting
effects in restaurants, cafés, wine
bars, sales and promotional areas.
Spherolit wallwashers
With Spherolit technology for wallwashing, the reflectors are formed
so as to produce an asymmetrical
light distribution for wallwashing with focal emphasis in the
upper area of the wall. The Spherolit wallwashers are available for
low-voltage halogen lamps up to
100W/12V and metal halide lamps
up to 150W.
Application
Asymmetrical light distribution for
wallwashing with focal emphasis
in the upper area especially of high
walls, for applications including
sales and promotional areas.
148
ERCO Program 2008/09
www.erco.com
Emanon for track
Lens wallwashers
www.erco.com
The highly uniform wallwashing of the lens wallwasher which
meet extremely high standards
of glare control, is ensured by
a special wallwasher reflector.
The wallwashers are available for
low-voltage halogen lamps up to
100W/12V and metal halide lamps
up to 150W.
Application
Asymmetrical light distribution for
very uniform wallwashing especially of high walls, for applications
including museums, exhibitions
and art galleries.
ERCO Program 2008/09
149
Emanon for track
The shape of Emanon is defined by
two rounded shells with shadow
gaps. Designer Yves Béhar and his
Californian design office, fuseproject, devised soft stylistic features as characteristic elements
to accentuate both the lighting
effect and the shape of these
luminaires. Innovative reflector
technology and control gear with
coded information extend the
scope in terms of light distribution and lighting control using
Light System DALI.
The innovative
and patented
Spherolit reflectors are ideal for
producing brilliant light with
a highly uniform
brightness pattern. Their surfaces consist of
computer-calculated, spherically
domed segments.
The Spherolit
reflectors can easily be exchanged
without tools. This
means that the
user can change
the reflector with
safety glass to suit
different lighting
tasks.
The thermally
stressed components such as
lamp, lampholder
and reflector
are installed in a
cylindrical metal
carrier with controlled ventilation, which sits
between the highquality plastic
shells of the spotlight housing.
The flat part of
the housing provides a thermally
separated space
for the electronic
or DALI-compatible control gear.
Its structured
surface marks
a gripping zone
for adjusting the
luminaires during
operation.
Four framing
blades can shape
the circular beam
or the gobo projection into a
square shape.
The projection
spotlight with
lens system
means that precise images can
be produced. The
three lenses produce a narrow
beam light distribution for a
maximum of
two gobos.
150
The projection
spotlight with
optical imaging
system has one
lens with a wide
beam angle for
soft-edged lighting effects. Both
projection spotlights are also
available with a
Goborotator.
ERCO Program 2008/09
www.erco.com
Emanon for track
The Emanon projection spotlight
with Goborotator can be fitted
with two metal gobos, glass gobos
or structure lenses (… 66mm). The
speed of rotation can be set from
four seconds to four minutes.
The gobos are easily exchanged.
After removing the front part of
the housing, the Goborotator
attachment is tilted to the side.
The gobos can be exchanged for
other motifs without tools by
removing the fixing springs. The
vibration-free bearings of the
motors and toothed belt drives
ensure low-noise, low-maintenance operation, which makes
the Goborotator ideal for continuous use in architectural applications.
Even without a DALI lighting control system, it is possible to select
twelve programs with different
speeds and directions of rotation
using a rotary switch on the luminaire itself. The Light System DALI
with the Light Studio software
gives the option of individual
settings.
ERCO provides
a selection of
gobos with abstract structures
as accessories.
Since the gobos
all have standard dimensions,
a wide variety of
other gobos can
be added from
other suppliers.
The direction of
rotation of the
gobos can be set
separately.
The extensive
range of gobo
projection options
can be controlled via the Light
Studio software:
speed, direction
of rotation, and
different dynamic
progressions can
all be adjusted to
suit specific lighting requirements.
www.erco.com
The Emanon
Goborotator can
be used to produce dynamic
light for impressive effects in a
room. By using
metal gobos, glass
gobos or structure lenses, the
designer is able
to produce a
whole range of
lighting effects.
Furthermore,
combining these
with colour filters opens up the
world of coloured
scenography.
ERCO Program 2008/09
151
Emanon for track
S (%)
100
S (%)
622
465
90
80
527
70
60
506
50
40
30
Because ERCO
uses LEDs with an
extremely high
colour saturation
in the Varychrome
luminaires, a particularly wide
range of colours
can be obtained.
The saturation
diagram shows
the mixed colours
as wavelength >
with the saturation given as a
percentage.
ERCO’s varychrome LED
luminaires have
been optimised
to produce high
luminous flux
with highly saturated light colours.
The luminous flux
diagram indicates
the output of
the LED module
with respect to
the wavelength.
20
The DALI-compatible luminaires
have digital control gear which
allows each lumi naire to be individually addressed,
for example by
using the ERCO
Light System
DALI with integral ERCO Light
Studio software.
10
> (nm)
780
0
380
300
480
490
500
510
530
555
575
600
(lm)
> (nm)
-569
-493
(lm)
250
583
200
478
150
-561
527
100
622
50
465
0
380
480
490
500
510
530
555
575
600
> (nm)
780
-493
> (nm)
-569
The coloured light of this Emanon
spotlight is created by twelve
high-power LEDs. The Softec lens
ensures complete mixing of the
red, green and blue light colours.
The narrow beam light distribution of the spot reflector lens system allows coloured highlighting
with high colour saturation. The
LED varychrome luminaires have
a colour compensation feature
to correct the manufacturing tolerances of the coloured LEDs by
calibrating the LED module. As a
result, the same DALI control values will give the user exactly the
same colour of light for all luminaires of a specific type.
Like other lamps, high-power
LEDs generate heat. To prevent
the luminous flux and life of the
lamp from decreasing drastically,
the maximum junction temperature must not be exceeded even
during continuous operation.
ERCO places particular importance on heat management in
its luminaires to ensure that the
LED modules remain below the
critical temperature range and
operate at full output through152
ERCO Program 2008/09
out their lives. Mounting the
LED module directly on metalcore PCBs effectively dissipates
the heat to the luminaire housing. The form, design and material of the housing all contribute
to effective heat management.
Extensive simulations and tests
in the development phase ensure
the success of the production
procedures used.
www.erco.com
Emanon Spotlight varychrome LED with DALI adapter
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder-coated, rotatable on the DALI adapter through 360°.
Internal wiring.
ERCO DALI adapter for DALI track:
plastic.
Electronic control gear for ERCO
Varychrome colour mixing.
Replaceable LED module: high-power
LEDs on metallic core PCB with lens
system.
$!,)
h(m)
76541.000 White (RAL9002) LED red,
green, blue DALI
76542.000 Silver LED red, green, blue
DALI
LED 13W 390lm
Version 1
Colour compensation for precise light
colour.
Weight 2.55kg LMF D
Anti-dazzle ring: cast aluminium, black
powder-coated. Peripheral groove for
fixing accessories. Softec lens.
Accessories page 159
60°
LED
30°
60°
4000 cd
30°
1
2
3
4
5
E(lx) D(m)
13°
3188 0.23
797 0.46
354 0.68
199 0.91
128 1.14
Primary colours LED module
Luminous flux F(lm)
Dominant wavelength l(nm)
Colour saturation S(%)
Colour
Red
Green
Blue
F(lm)
140
184
64
l(nm)
620-625
525-530
465-470
S(%)
99
77
97
Emanon Spotlight for low-voltage halogen lamps
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder-coated, rotatable on 3-circuit adapter through 360°.
Internal wiring.
Electronic transformer 220-240/12V.
Potentiometer for brightness control
10%-100%. LED function indicator.
ERCO 3-circuit adapter: plastic.
Anti-dazzle ring: cast aluminium, black
powder-coated. Peripheral groove for
fixing accessories. Anti-dazzle cap
attached to safety glass.
Reflector replacement without tools.
www.erco.com
60°
QT12-ax-RE
30°
60°
20000 cd
30°
1
2
3
4
5
h(m)
60°
QT12-ax-RE
30°
60°
9000 cd
30°
1
2
3
4
5
h(m)
76433.000 White (RAL9002)
76434.000 Silver
QT12-ax-RE 50W 12V GY6.35 1250lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 1.30kg LMF D
76430.000 White (RAL9002)
76431.000 Silver
QT12-ax-RE 50W 12V GY6.35 1250lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 1.30kg LMF D
h(m)
76427.000 White (RAL9002)
76428.000 Silver
QT12-ax-RE 50W 12V GY6.35 1250lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 1.30kg LMF D
Use dimmers for electronic transformers
(trailing edge).
Accessories page 160
60°
QT12-ax-RE
30°
60°
2500 cd
30°
1
2
3
4
5
E(lx) D(m)
9°
16041 0.16
4010 0.31
1782 0.47
1003 0.63
642 0.79
E(lx) D(m)
15°
7064 0.26
1766 0.53
785 0.79
441 1.05
283 1.32
E(lx) D(m)
31°
1796 0.55
449 1.11
200 1.66
112 2.22
72 2.77
ERCO Program 2008/09
153
Emanon Spotlight for low-voltage halogen lamps
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder-coated, rotatable on 3-circuit adapter through 360°.
Internal wiring.
Electronic transformer 240/12V.
Potentiometer for brightness control
10%-100%. LED function indicator.
ERCO 3-circuit adapter: plastic.
Anti-dazzle ring: cast aluminium, black
powder-coated. Peripheral groove for
fixing accessories.
Reflector replacement without tools.
154
60°
QT12-ax-LP
30°
60°
60000 cd
30°
1
2
3
4
5
h(m)
60°
QT12-ax-LP
30°
60°
20000 cd
30°
1
2
3
4
5
h(m)
60°
QT12-ax-LP
30°
60°
6000 cd
30°
1
2
3
4
5
h(m)
76478.006 White (RAL9002)
76479.006 Silver
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Safety glass.
Weight 2.40kg LMF D
76475.006 White (RAL9002)
76476.006 Silver
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised. Antidazzle cap attached to safety glass.
Weight 2.40kg LMF D
76472.006 White (RAL9002)
76473.006 Silver
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, spot: aluminium, silver, mirror-finish anodised. Anti-dazzle
cap attached to safety glass.
Weight 2.40kg LMF D
h(m)
76469.006 White (RAL9002)
76470.006 Silver
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Anti-dazzle cap attached to safety
glass.
Weight 2.40kg LMF D
Use dimmers for electronic transformers
(trailing edge).
Accessories page 159
ERCO Program 2008/09
60°
QT12-ax-LP
30°
60°
2500 cd
30°
1
2
3
4
5
E(lx) D(m)
7°
54234 0.12
13559 0.24
6026 0.37
3390 0.49
2169 0.61
E(lx) D(m)
14°
15709 0.25
3927 0.49
1745 0.74
982 0.98
628 1.23
E(lx) D(m)
29°
4573 0.52
1143 1.03
508 1.55
286 2.07
183 2.59
E(lx) D(m)
53°
1761 1.00
440 1.99
196 2.99
110 3.99
70 4.99
www.erco.com
Emanon Spotlight with DALI adapter for low-voltage halogen lamps
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder-coated, rotatable on DALI adapter through 360°.
Internal wiring.
Electronic transformer 230/240/12V.
ERCO DALI adapter for DALI track:
plastic.
Anti-dazzle ring: cast aluminium, black
powder-coated. Peripheral groove for
fixing accessories.
Reflector replacement without tools.
Accessories page 159
$!,)
www.erco.com
60°
QT12-ax-LP
30°
60°
60000 cd
30°
1
2
3
4
5
h(m)
60°
QT12-ax-LP
30°
60°
20000 cd
30°
1
2
3
4
5
h(m)
60°
QT12-ax-LP
30°
60°
6000 cd
30°
1
2
3
4
5
h(m)
76508.000 White (RAL9002) DALI
76509.000 Silver DALI
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Safety glass.
Weight 2.45kg LMF D
76505.000 White (RAL9002) DALI
76506.000 Silver DALI
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised. Antidazzle cap attached to safety glass.
Weight 2.45kg LMF D
76502.000 White (RAL9002) DALI
76503.000 Silver DALI
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, spot: aluminium, silver, mirror-finish anodised. Anti-dazzle
cap attached to safety glass.
Weight 2.45kg LMF D
h(m)
76499.000 White (RAL9002) DALI
76500.000 Silver DALI
QT12-ax-LP 100W 12V GY6.35 2200lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Anti-dazzle cap attached to safety
glass.
Weight 2.45kg LMF D
60°
QT12-ax-LP
30°
60°
2500 cd
30°
1
2
3
4
5
E(lx) D(m)
7°
54234 0.12
13559 0.24
6026 0.37
3390 0.49
2169 0.61
E(lx) D(m)
14°
15709 0.25
3927 0.49
1745 0.74
982 0.98
628 1.23
E(lx) D(m)
29°
4573 0.52
1143 1.03
508 1.55
286 2.07
183 2.59
E(lx) D(m)
53°
1761 1.00
440 1.99
196 2.99
110 3.99
70 4.99
ERCO Program 2008/09
155
Emanon Spotlight for metal halide lamps
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder-coated, rotatable on 3-circuit adapter through 360°.
Internal wiring.
Electronic control gear.
ERCO 3-circuit adapter: plastic.
Anti-dazzle ring: cast aluminium, black
powder-coated. Peripheral groove for
fixing accessories. Safety glass.
Reflector replacement without tools.
Accessories page 160
76421.000 White (RAL9002) ECG
76422.000 Silver ECG
HIT-TC-CE 35W G8.5 3300lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Weight 1.50kg LMF D
156
ERCO Program 2008/09
30°
60°
20000 cd
60°
HIT-TC-CE
30°
30°
60°
10000 cd
1
2
3
4
5
30°
1
2
3
4
5
h(m)
60°
HIT-TC-CE
30°
60°
4000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-TC-CE
30°
60°
2000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-TC-CE
30°
60°
35000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-TC-CE
30°
60°
20000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-TC-CE
30°
60°
7500 cd
30°
1
2
3
4
5
h(m)
76418.000 White (RAL9002) ECG
76419.000 Silver ECG
HIT-TC-CE 35W G8.5 3300lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 1.50kg LMF D
HIT-TC-CE
76415.000 White (RAL9002) ECG
76416.000 Silver ECG
HIT-TC-CE 35W G8.5 3300lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 1.50kg LMF D
76412.000 White (RAL9002) ECG
76413.000 Silver ECG
HIT-TC-CE 35W G8.5 3300lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 1.50kg LMF D
60°
h(m)
76539.000 White (RAL9002) ECG
76540.000 Silver ECG
HIT-TC-CE 20W G8.5 1700lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Weight 1.50kg LMF D
76406.000 White (RAL9002) ECG
76407.000 Silver ECG
HIT-TC-CE 20W G8.5 1700lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 1.50kg LMF D
76403.000 White (RAL9002) ECG
76404.000 Silver ECG
HIT-TC-CE 20W G8.5 1700lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 1.50kg LMF D
h(m)
76400.000 White (RAL9002) ECG
76401.000 Silver ECG
HIT-TC-CE 20W G8.5 1700lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 1.50kg LMF D
60°
HIT-TC-CE
30°
60°
4000 cd
30°
1
2
3
4
5
E(lx) D(m)
10°
16769 0.17
4192 0.35
1863 0.52
1048 0.70
671 0.87
E(lx) D(m)
16°
8484 0.28
2121 0.56
943 0.84
530 1.12
339 1.41
E(lx) D(m)
32°
2655 0.57
664 1.15
295 1.72
166 2.29
106 2.87
E(lx) D(m)
47°
0.87
1.74
2.61
3.48
4.35
1321
330
147
83
53
E(lx) D(m)
10°
29756 0.17
7439 0.35
3306 0.52
1860 0.70
1190 0.87
E(lx) D(m)
16°
14810 0.28
3702 0.56
1646 0.84
926 1.12
592 1.41
E(lx) D(m)
31°
5479 0.55
1370 1.11
609 1.66
342 2.22
219 2.77
E(lx) D(m)
46°
2779 0.85
695 1.70
309 2.55
174 3.40
111 4.24
www.erco.com
Emanon Spotlight with DALI adapter for metal halide lamps
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder-coated, rotatable on DALI adapter through 360°.
Internal wiring.
Electronic control gear, switchable.
ERCO DALI adapter for DALI track:
plastic.
Anti-dazzle ring: cast aluminium, black
powder-coated. Peripheral groove for
fixing accessories. Safety glass.
Reflector replacement without tools.
Accessories page 160
$!,)
h(m)
76529.000 White (RAL9002) ECG DALI
76530.000 Silver ECG DALI
HIT-TC-CE 35W G8.5 3300lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 1.50kg LMF D
60°
HIT-TC-CE
30°
60°
35000 cd
30°
1
2
3
4
5
h(m)
76531.000 White (RAL9002) ECG DALI
76532.000 Silver ECG DALI
HIT-TC-CE 35W G8.5 3300lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 1.50kg LMF D
60°
HIT-TC-CE
30°
60°
15000 cd
30°
1
2
3
4
5
h(m)
76533.000 White (RAL9002) ECG DALI
76534.000 Silver ECG DALI
HIT-TC-CE 35W G8.5 3300lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 1.50kg LMF D
60°
HIT-TC-CE
30°
60°
7500 cd
30°
1
2
3
4
5
h(m)
76535.000 White (RAL9002) ECG DALI
76536.000 Silver ECG DALI
HIT-TC-CE 35W G8.5 3300lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Weight 1.50kg LMF D
60°
HIT-TC-CE
30°
60°
4000 cd
30°
1
2
3
4
5
E(lx) D(m)
10°
29756 0.17
7439 0.35
3306 0.52
1860 0.70
1190 0.87
E(lx) D(m)
16°
14810 0.28
3702 0.56
1646 0.84
926 1.12
592 1.41
E(lx) D(m)
31°
5479 0.55
1370 1.11
609 1.66
342 2.22
219 2.77
E(lx) D(m)
46°
0.85
1.70
2.55
3.40
4.24
2779
695
309
174
111
Emanon Spotlight for metal halide lamps
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder-coated, rotatable on 3-circuit adapter through 360°.
Internal wiring.
Electronic control gear.
ERCO 3-circuit adapter: plastic.
Anti-dazzle ring: cast aluminium, black
powder-coated. Peripheral groove for
fixing accessories. Safety glass.
Reflector replacement without tools.
Accessories page 159
www.erco.com
60°
HIT-CE
30°
60°
80000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
40000 cd
30°
1
2
3
4
5
h(m)
76445.000 White (RAL9002) ECG
76446.000 Silver ECG
HIT-CE 70W G12 6600lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 2.50kg LMF D
76442.000 White (RAL9002) ECG
76443.000 Silver ECG
HIT-CE 70W G12 6600lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 2.50kg LMF D
h(m)
76439.000 White (RAL9002) ECG
76440.000 Silver ECG
HIT-CE 70W G12 6600lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 2.50kg LMF D
60°
HIT-CE
30°
60°
15000 cd
30°
1
2
3
4
5
E(lx) D(m)
10°
68629 0.17
17157 0.35
7625 0.52
4289 0.70
2745 0.87
E(lx) D(m)
17°
32850 0.30
8213 0.60
3650 0.90
2053 1.20
1314 1.49
E(lx) D(m)
31°
11279 0.55
2820 1.11
1253 1.66
705 2.22
451 2.77
ERCO Program 2008/09
157
Emanon Spotlight for metal halide lamps
HIT-CE
30°
60°
6000 cd
60°
HIT-CE
30°
30°
60°
110000 cd
1
2
3
4
5
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
70000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
30000 cd
30°
1
2
3
4
5
h(m)
76463.000 White (RAL9002) ECG
76464.000 Silver ECG
HIT-CE 150W G12 14000lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Weight 3.00kg LMF D
60°
h(m)
76460.000 White (RAL9002) ECG
76461.000 Silver ECG
HIT-CE 150W G12 14000lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 3.00kg LMF D
76457.000 White (RAL9002) ECG
76458.000 Silver ECG
HIT-CE 150W G12 14000lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 3.00kg LMF D
76454.000 White (RAL9002) ECG
76455.000 Silver ECG
HIT-CE 150W G12 14000lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 3.00kg LMF D
h(m)
76448.000 White (RAL9002) ECG
76449.000 Silver ECG
HIT-CE 70W G12 6600lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Weight 2.50kg LMF D
60°
HIT-CE
30°
60°
12500 cd
30°
1
2
3
4
5
E(lx) D(m)
55°
4196 1.04
1049 2.08
466 3.12
262 4.16
168 5.21
E(lx) D(m)
12°
91838 0.21
22959 0.42
10204 0.63
5740 0.84
3674 1.05
E(lx) D(m)
18°
53678 0.32
13419 0.63
5964 0.95
3355 1.27
2147 1.58
E(lx) D(m)
31°
22208 0.55
5552 1.11
2468 1.66
1388 2.22
888 2.77
E(lx) D(m)
53°
9266 1.00
2316 1.99
1030 2.99
579 3.99
371 4.99
Emanon Spotlight with DALI adapter for metal halide lamps
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder-coated, rotatable on DALI adapter through 360°.
Internal wiring.
Electronic control gear, switchable.
ERCO DALI adapter for DALI track:
plastic.
Anti-dazzle ring: cast aluminium, black
powder-coated. Peripheral groove for
fixing accessories. Safety glass.
Reflector replacement without tools.
Accessories page 159
$!,)
158
60°
HIT-CE
30°
60°
80000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
40000 cd
30°
1
2
3
4
5
h(m)
60°
HIT-CE
30°
60°
15000 cd
30°
1
2
3
4
5
h(m)
76493.000 White (RAL9002) ECG DALI
76494.000 Silver ECG DALI
HIT-CE 70W G12 6600lm
Spherolit reflector, wide-flood: aluminium, silver, mirror-finish anodised.
Weight 2.55kg LMF D
76490.000 White (RAL9002) ECG DALI
76491.000 Silver ECG DALI
HIT-CE 70W G12 6600lm
Spherolit reflector, flood: aluminium,
silver, mirror-finish anodised.
Weight 2.55kg LMF D
76487.000 White (RAL9002) ECG DALI
76488.000 Silver ECG DALI
HIT-CE 70W G12 6600lm
Spherolit reflector, spot: aluminium,
silver, mirror-finish anodised.
Weight 2.55kg LMF D
h(m)
76484.000 White (RAL9002) ECG DALI
76485.000 Silver ECG DALI
HIT-CE 70W G12 6600lm
Spherolit reflector, narrow spot: aluminium, silver, mirror-finish anodised.
Weight 2.55kg LMF D
ERCO Program 2008/09
60°
HIT-CE
30°
60°
6000 cd
30°
1
2
3
4
5
E(lx) D(m)
10°
68629 0.17
17157 0.35
7625 0.52
4289 0.70
2745 0.87
E(lx) D(m)
17°
32850 0.30
8213 0.60
3650 0.90
2053 1.20
1314 1.49
E(lx) D(m)
31°
11279 0.55
2820 1.11
1253 1.66
705 2.22
451 2.77
E(lx) D(m)
55°
4196 1.04
1049 2.08
466 3.12
262 4.16
168 5.21
www.erco.com
70
9
70 66.0
98 00
70 6.00
9 0
70 67.0
98 00
70 7.00
9 0
70 68.0
98 00
70 8.00
9 0
70 69.0
98 00
70 9.00
9 0
70 70.0
99 00
0.0
75 00
93
5.0
75 00
9
75 41.0
94 00
75 0.00
9 0
75 06.0
90 00
5.0
74 00
82
0.0
00
74
82
5.0
74 00
80
74 6.0
80 00
5.0
74 00
48
6.0
00
74
48
7.0
00
74
45
1.0
00
74
45
2.0
00
74
45
3.0
00
74
45
4.0
00
Emanon Accessories
76439.000
76440.000
76442.000
76443.000
76445.000
76446.000
76448.000
76449.000
76454.000
76455.000
76457.000
76458.000
76460.000
76461.000
76463.000
76464.000
76469.006
76470.006
76472.006
76473.006
76475.006
76476.006
76478.006
76479.006
76484.000
76485.000
76487.000
76488.000
76490.000
76491.000
76493.000
76494.000
76499.000
76500.000
76502.000
76503.000
76505.000
76506.000
76508.000
76509.000
76541.000
76542.000
www.erco.com
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ERCO Program 2008/09
159
70
9
70 56.0
98 00
70 1.00
9 0
70 57.0
98 00
70 2.00
9 0
70 58.0
98 00
70 3.00
9 0
70 84.0
96 00
0.0
70 00
98
5.0
00
75
82
5.0
75 00
8
75 31.0
83 00
75 0.00
8 0
75 01.0
80 00
0.0
74 00
42
0.0
00
74
42
5.0
74 00
4
74 06.0
40 00
5.0
74 00
48
4.0
00
74
48
5.0
00
74
44
7.0
00
74
44
8.0
00
74
44
9.0
00
74
45
0.0
00
Emanon Accessories
76400.000
76401.000
76403.000
76404.000
76406.000
76407.000
76412.000
76413.000
76415.000
76416.000
76418.000
76419.000
76421.000
76422.000
76427.000
76428.000
76430.000
76431.000
76433.000
76434.000
76529.000
76530.000
76531.000
76532.000
76533.000
76534.000
76535.000
76536.000
76539.000
76540.000
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
70956.000
70966.000
Spherolit reflector,
narrow spot
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Anti-dazzle cap
attached to safety
glass.
70981.000
70986.000
Spherolit reflector,
narrow spot
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Safety glass.
70957.000
70967.000
Spherolit reflector,
spot
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Anti-dazzle cap
attached to safety
glass.
70982.000
70987.000
Spherolit reflector,
spot
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Safety glass.
70958.000
70968.000
Spherolit reflector,
flood
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Anti-dazzle cap
attached to safety
glass.
70983.000
70988.000
Spherolit reflector,
flood
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Safety glass.
70969.000
70984.000
70989.000
Spherolit reflector,
wide flood
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Safety glass.
70960.000
70970.000
70985.000
70990.000
Spherolit reflector,
wallwash
Reflector set
replaceable
without tools.
Reflector: Aluminium, silver, mirrorfinish anodised.
Softec lens.
74420.000
74820.000
Sculpture lens
74425.000
74825.000
Flood lens
74406.000
74806.000
UV filter
74405.000
74805.000
IR filter
74484.000
74486.000
Skintone filter
74485.000
74487.000
Daylight conversion filter
74447.000
74451.000
Interference colour filter
Magenta
74448.000
74452.000
Interference colour filter
Amber
160
ERCO Program 2008/09
www.erco.com
Emanon Accessories
74449.000
74453.000
Interference colour filter
Sky blue
74450.000
74454.000
Interference colour filter
Night blue
75825.000
75935.000
Anti-dazzle ring
Plastic, black.
75831.000 White
75941.000 White
75830.000 Black
75940.000 Black
Barn doors
Metal, powdercoated.
75801.000 White
75906.000 White
75800.000 Black
75905.000 Black
Mounting ring
Plastic.
Emanon Projector spotlight for low-voltage halogen lamps
76568.006 White (RAL9002)
76569.006 Silver
QT12-ax 90W 12V GY6.35 1800lm
Weight 4.75kg
www.erco.com
Contour attachment removable for
lamp replacement without tools.
Use dimmers for electronic transformers
(trailing edge).
Available as of 3rd quarter of 2008
Accessories page 171
With projection lens for precise projection.
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder- coated, on the
mechanical adapter rotatable through
360°.
Only for ceiling mounting.
Electronic transformer 240/12V.
Potentiometer for brightness control
10%-100%. LED function indicator.
ERCO 3-circuit adapter with cable:
plastic.
Reflector: aluminium, silver anodised. IR
filter.
Contour attachment: aluminium,
powder-coated. Framing attachment
(opening 8x8mm) with holder for
aperture masks or gobo (ø 66mm).
3 aperture masks: metal, black, ø 50,
ø 40, ø 30. Lens 1:1. 7/100mm, focusing
± 10mm.
QT12-ax
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Maximum edge length D (m) of
square projection through framing
attachment dependent on projection
distance h (m)
Aperture
mask
(mm)
h (m)
E (lx)
D (m)
1
2
3
4
5
1890
473
210
118
76
0.35
0.71
1.06
1.41
1.77
h (m)
E (lx)
D (m)
630
1
2
3
4
5
3006
752
334
188
120
16
0.30
0.60
0.90
1.20
1.50
640
1
2
3
4
5
2430
608
270
152
97
22
0.40
0.80
1.20
1.60
2.00
650
1
2
3
4
5
1890
473
210
118
76
26
0.50
1.00
1.50
2.00
2.50
ERCO Program 2008/09
161
Emanon Projector spotlight for low-voltage halogen lamps
76562.006 White (RAL9002)
76563.006 Silver
QT12-ax 90W 12V GY6.35 1800lm
Weight 4.55kg
162
Contour attachment removable for
lamp replacement without tools.
Use dimmers for electronic transformers
(trailing edge).
Available as of 3rd quarter of 2008
Accessories page 171
Projection lens for soft-edged effect
lighting.
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder- coated, on the
mechanical adapter rotatable through
360°.
Only for ceiling mounting.
Electronic transformer 240/12V.
Potentiometer for brightness control
10%-100%. LED function indicator.
ERCO 3-circuit adapter with cable:
plastic.
Reflector: aluminium, silver anodised. IR
filter.
Contour attachment: aluminium,
powder-coated. Framing attachment
(opening 8x8mm) with holder for
aperture masks or gobo (ø 66mm).
3 aperture masks: metal, black, ø 50,
ø 40, ø 30. Projection lens, 50mm, Focal
length, focusable.
QT12-ax
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Maximum edge length D (m) of
square projection through framing
attachment dependent on projection
distance h (m)
Aperture
mask
(mm)
h (m)
h (m)
E (lx)
D (m)
630
1
2
3
4
5
716
179
79
45
29
33
0.60
1.20
1.80
2.40
3.00
640
1
2
3
4
5
608
152
68
38
24
44
0.80
1.60
2.40
3.20
4.00
650
1
2
3
4
5
461
115
51
29
18
53
1.00
2.00
3.00
4.00
5.00
ERCO Program 2008/09
1
2
3
4
5
E (lx)
D (m)
461
115
51
29
18
0.71
1.41
2.12
2.83
3.54
www.erco.com
Emanon Projector spotlight with DALI adapter for low-voltage halogen lamps
With projection lens for precise projection.
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder-coated, on the
mechanical adapter rotatable through
360°.
Only for ceiling mounting.
Electronic transformer 230/240/12V.
ERCO DALI adapter with cable for DALI
track: plastic.
Reflector: aluminium, silver anodised. IR
filter.
76576.000 White (RAL9002) DALI
76577.000 Silver DALI
QT12-ax 90W 12V GY6.35 1800lm
Weight 4.80kg
$!,)
www.erco.com
Contour attachment: aluminium,
powder-coated. Framing attachment
(opening 8x8mm) with holder for
aperture masks or gobo (ø 66mm).
3 aperture masks: metal, black, ø 50,
ø 40, ø 30. Lens 1:1. 7/100mm, focusing
± 10mm.
Contour attachment removable for
lamp replacement without tools.
Available as of 3rd quarter of 2008
Accessories page 171
QT12-ax
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Maximum edge length D (m) of
square projection through framing
attachment dependent on projection
distance h (m)
Aperture
mask
(mm)
h (m)
E (lx)
D (m)
1
2
3
4
5
1890
473
210
118
76
0.35
0.71
1.06
1.41
1.77
h (m)
E (lx)
D (m)
630
1
2
3
4
5
3006
752
334
188
120
16
0.30
0.60
0.90
1.20
1.50
640
1
2
3
4
5
2430
608
270
152
97
22
0.40
0.80
1.20
1.60
2.00
650
1
2
3
4
5
1890
473
210
118
76
26
0.50
1.00
1.50
2.00
2.50
ERCO Program 2008/09
163
Emanon Projector spotlight with DALI adapter for low-voltage halogen lamps
Projection lens for soft-edged effect
lighting.
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder- coated, on the
mechanical adapter rotatable through
360°.
Only for ceiling mounting.
Electronic transformer 230/240/12V.
ERCO DALI adapter with cable for DALI
track: plastic.
Reflector: aluminium, silver anodised. IR
filter.
Contour attachment: aluminium,
powder-coated. Framing attachment
(opening 8x8mm) with holder for
aperture masks or gobo (ø 66mm).
3 aperture masks: metal, black, ø 50,
ø 40, ø 30. Projection lens with focal
length of 50mm, focusable.
Contour attachment removable for
lamp replacement without tools.
76574.000 White (RAL9002) DALI
76575.000 Silver DALI
QT12-ax 90W 12V GY6.35 1800lm
Weight 4.60kg
$!,)
164
Available as of 3rd quarter of 2008
Accessories page 171
QT12-ax
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Maximum edge length D (m) of
square projection through framing
attachment dependent on projection
distance h (m)
Aperture
mask
(mm)
h (m)
h (m)
E (lx)
D (m)
630
1
2
3
4
5
716
179
79
45
29
33
0.60
1.20
1.80
2.40
3.00
640
1
2
3
4
5
608
152
68
38
24
44
0.80
1.60
2.40
3.20
4.00
650
1
2
3
4
5
461
115
51
29
18
53
1.00
2.00
3.00
4.00
5.00
ERCO Program 2008/09
1
2
3
4
5
E (lx)
D (m)
461
115
51
29
18
0.71
1.41
2.12
2.83
3.54
www.erco.com
Emanon Projector spotlight for metal halide lamps
76556.000 White (RAL9002) ECG
76557.000 Silver ECG
HIT-CE 70W G12 6600lm
Weight 4.85kg
www.erco.com
Contour attachment: aluminium,
powder-coated. Framing attachment
(opening 8x8mm) with holder for
aperture masks or gobo (ø 66mm).
3 aperture masks: metal, black, ø 50,
ø 40, ø 30. Lens 1:1. 7/100mm, focusing
± 10mm.
Contour attachment removable for
lamp replacement without tools.
Available as of 3rd quarter of 2008
Accessories page 171
With projection lens for precise projection.
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder-coated, on the
mechanical adapter rotatable through
360°.
Only for ceiling mounting.
Electronic control gear.
ERCO 3-circuit adapter with cable:
plastic.
Reflector: aluminium, silver anodised. IR
filter.
HIT-CE
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Maximum edge length D (m) of
square projection through framing
attachment dependent on projection
distance h (m)
Aperture
mask
(mm)
h (m)
E (lx)
D (m)
1
2
3
4
5
3590
898
399
224
144
0.35
0.71
1.06
1.41
1.77
h (m)
E (lx)
D (m)
630
1
2
3
4
5
5000
1250
556
313
200
16
0.30
0.60
0.90
1.20
1.50
640
1
2
3
4
5
4615
1154
513
288
185
22
0.40
0.80
1.20
1.60
2.00
650
1
2
3
4
5
3590
898
399
224
144
26
0.50
1.00
1.50
2.00
2.50
ERCO Program 2008/09
165
Emanon Projector spotlight for metal halide lamps
76550.000 White (RAL9002) ECG
76551.000 Silver ECG
HIT-CE 70W G12 6600lm
Weight 4.65kg
166
Contour attachment: aluminium,
powder-coated. Framing attachment
(opening 8x8mm) with holder for
aperture masks or gobo (ø 66mm).
3 aperture masks: metal, black, ø 50,
ø 40, ø 30. Projection lens with focal
length of 50mm, focusable.
Contour attachment removable for
lamp replacement without tools.
Available as of 3rd quarter of 2008
Accessories page 171
Projection lens for soft-edged effect
lighting.
Housing: high-temperature plastic.
Non-slip surface with geometrically
arranged dimples. 0°-90° tilt. Bracket:
cast aluminium, powder- coated, on the
mechanical adapter rotatable through
360°.
Only for ceiling mounting.
Electronic control gear.
ERCO 3-circuit adapter with cable:
plastic.
Reflector: aluminium, silver anodised. IR
filter.
HIT-CE
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Maximum edge length D (m) of
square projection through framing
attachment dependent on projection
distance h (m)
Aperture
mask
(mm)
h (m)
h (m)
E (lx)
D (m)
630
1
2
3
4
5
1226
306
136
72
49
33
0.60
1.20
1.80
2.40
3.00
640
1
2
3
4
5
1188
297
132
74
47
44
0.80
1.60
2.40
3.20
4.00
650
1
2
3
4
5
901
277
123
69
44
53
1.00
2.00
3.00
4.00
5.00
ERCO Program 2008/09
1
2
3
4
5
E (lx)
D (m)
901
277
123
69
44
0.71
1.41
2.12
2.83
3.54
www.erco.com
Emanon Projector spotlight with Goborotator for low-voltage halogen lamps
76570.006 White (RAL9002)
76571.006 Silver
QT12-ax 90W 12V GY6.35 1800lm
Weight 6.50kg
for adjusting the gobos. Low-noise
toothed-belt drive.
Switch for calling up speed and rotational direction (12 programs). Pushbutton for setting the reference position. LED function indicator.
Goborotator attachment removable for
lamp replacement without tools. Screw
fixing.
Use dimmers for electronic transformers
(trailing edge).
Available as of 3rd quarter of 2008
Accessories page 171
With projection lens for precise projections.
Thermally optimised housing without
fan: high-temperature plastic. Non-slip
surface with geometrically arranged
dimples. 0°-90° tilt. Bracket: cast aluminium, powder- coated, on the mechanical adapter rotatable through 360°.
Only for ceiling mounting.
Electronic transformer 240/12V.
Potentiometer for brightness control
10%-100%. LED function indicator.
2 ERCO 3-circuit adapters with cable:
plastic.
Reflector: aluminium, silver anodised. IR
filter.
Goborotator attachment: plastic.
Two rotatable receptacles for gobos
(ø 66mm). Lens 1:1,7/100mm, focusing
± 10mm.
Two elastically mounted stepping
motors, 4s/1 to 360s/1. Hall sensors
QT12-ax
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Aperture
mask
h (m) E (lx)
(mm)
630
1
2
3
4
5
3006
752
334
188
120
D (m)
16
0.30
0.60
0.90
1.20
1.50
Aperture
mask
h (m) E (lx)
(mm)
640
1
2
3
4
5
2430
608
270
152
97
Aperture
mask
h (m) E (lx)
(mm)
D (m)
22
0.40
0.80
1.20
1.60
2.00
650
76566.006 White (RAL9002)
76567.006 Silver
QT12-ax 90W 12V GY6.35 1800lm
Weight 6.30kg
1890
473
210
118
76
26
0.50
1.00
1.50
2.00
2.50
for adjusting the gobos. Low-noise
toothed-belt drive.
Switch for calling up speed and rotational direction (12 programs). Pushbutton for setting the reference position. LED function indicator.
Goborotator attachment removable for
lamp replacement without tools. Screw
fixing.
Use dimmers for electronic transformers
(trailing edge).
Available as of 3rd quarter of 2008
Accessories page 171
Projection lens for soft-edged effect
lighting.
Thermally optimised housing without
fan: high-temperature plastic. Non-slip
surface with geometrically arranged
dimples. 0°-90° tilt. Bracket: cast aluminium, powder- coated, on the mechanical adapter rotatable through 360°.
Only for ceiling mounting.
Electronic transformer 240/12V.
Potentiometer for brightness control
10%-100%. LED function indicator.
2 ERCO 3-circuit adapters with cable:
plastic.
Reflector: aluminium, silver anodised. IR
filter.
Goborotator attachment: plastic.
Two rotatable receptacles for gobos
(ø 66mm). Projection lens, 50mm focal
length, focusable.
Two elastically mounted stepping
motors, 4s/1 to 360s/1. Hall sensors
1
2
3
4
5
D (m)
QT12-ax
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Aperture
mask
h (m) E (lx)
(mm)
630
www.erco.com
1
2
3
4
5
716
179
79
45
29
D (m)
33
0.60
1.20
1.80
2.40
3.00
Aperture
mask
h (m) E (lx)
(mm)
640
1
2
3
4
5
608
152
68
38
24
D (m)
44
0.80
1.60
2.40
3.20
4.00
Aperture
mask
h (m) E (lx)
(mm)
650
1
2
3
4
5
ERCO Program 2008/09
461
115
51
29
18
D (m)
53
1.00
2.00
3.00
4.00
5.00
167
Emanon Projector spotlight with Goborotator and DALI adapter for low-voltage halogen lamps
With projection lens for precise projections.
Thermally optimised housing without
fan: high-temperature plastic. Non-slip
surface with geometrically arranged
dimples. 0°-90° tilt. Bracket: cast aluminium, powder- coated, on the mechanical adapter rotatable through 360°.
Only for ceiling mounting.
Electronic transformer 230/240/12V.
2 ERCO DALI adapters with cable for
DALI track: plastic.
Reflector: aluminium, silver anodised. IR
filter.
Goborotator attachment: plastic.
Two rotatable receptacles for gobos
(ø 66mm). Lens 1:1,7/100mm, focusing
± 10mm.
Two elastically mounted stepping
motors, 4s/1 to 360s/1. Hall sensors
for adjusting the gobos. Low-noise
toothed-belt drive.
76572.000 White (RAL9002) DALI
76573.000 Silver DALI
QT12-ax 90W 12V GY6.35 1800lm
Weight 6.55kg
$!,)
The speed and rotational direction are
recalled via the Light System DALI software. LED function indicator.
Goborotator attachment removable for
lamp replacement without tools. Screw
fixing.
Available as of 3rd quarter of 2008
Accessories page 171
QT12-ax
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Aperture
mask
h (m) E (lx)
(mm)
630
1
2
3
4
5
3006
752
334
188
120
D (m)
16
0.30
0.60
0.90
1.20
1.50
640
1
2
3
4
5
2430
608
270
152
97
D (m)
22
0.40
0.80
1.20
1.60
2.00
Projection lens for soft-edged effect
lighting.
Thermally optimised housing without
fan: high-temperature plastic. Non-slip
surface with geometrically arranged
dimples. 0°-90° tilt. Bracket: cast aluminium, powder- coated, on the mechanical adapter rotatable through 360°.
Only for ceiling mounting.
Electronic transformer 230/240/12V.
2 ERCO DALI adapters with cable for
DALI track: plastic.
Reflector: aluminium, silver anodised. IR
filter.
Goborotator attachment: plastic.
Two rotatable receptacles for gobos
(ø 66mm). Projection lens, 50mm focal
length, focusable.
Two elastically mounted stepping
motors, 4s/1 to 360s/1. Hall sensors
for adjusting the gobos. Low-noise
toothed-belt drive.
Aperture
mask
h (m) E (lx)
(mm)
650
1
2
3
4
5
1890
473
210
118
76
D (m)
26
0.50
1.00
1.50
2.00
2.50
The speed and rotational direction are
recalled via the Light System DALI software. LED function indicator.
Goborotator attachment removable for
lamp replacement without tools. Screw
fixing.
Available as of 3rd quarter of 2008
Accessories page 171
$!,)
76564.000 White (RAL9002) DALI
76565.000 Silver DALI
QT12-ax 90W 12V GY6.35 1800lm
Weight 6.35kg
Aperture
mask
h (m) E (lx)
(mm)
QT12-ax
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Aperture
mask
h (m) E (lx)
(mm)
630
168
ERCO Program 2008/09
1
2
3
4
5
716
179
79
45
29
D (m)
33
0.60
1.20
1.80
2.40
3.00
Aperture
mask
h (m) E (lx)
(mm)
640
1
2
3
4
5
608
152
68
38
24
D (m)
44
0.80
1.60
2.40
3.20
4.00
Aperture
mask
h (m) E (lx)
(mm)
650
1
2
3
4
5
461
115
51
29
18
D (m)
53
1.00
2.00
3.00
4.00
5.00
www.erco.com
Emanon Projector spotlight with Goborotator for metal halide lamps
76558.000 White (RAL9002) ECG
76559.000 Silver ECG
HIT-CE 70W G12 6600lm
Weight 6.60kg
Switch for calling up speed and rotational direction (12 programs). Pushbutton for setting the reference position. LED function indicator.
Goborotator attachment removable for
lamp replacement without tools. Screw
fixing.
Available as of 3rd quarter of 2008
Accessories page 171
With projection lens for precise projections.
Thermally optimised housing without
fan: high-temperature plastic. Non-slip
surface with geometrically arranged
dimples. 0°-90° tilt. Bracket: cast aluminium, powder- coated, on the mechanical adapter rotatable through 360°.
Only for ceiling mounting.
Electronic control gear.
2 ERCO 3-circuit adapters with cable:
plastic.
Reflector: aluminium, silver anodised. IR
filter.
Goborotator attachment: plastic.
Two rotatable receptacles for gobos
(ø 66mm). Lens 1:1,7/100mm, focusing
± 10mm.
Two elastically mounted stepping
motors, 4s/1 to 360s/1. Hall sensors
for adjusting the gobos. Low-noise
toothed-belt drive.
HIT-CE
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Aperture
mask
h (m) E (lx)
(mm)
630
1
2
3
4
5
5000
1250
556
313
200
D (m)
16
0.30
0.60
0.90
1.20
1.50
Aperture
mask
h (m) E (lx)
(mm)
640
1
2
3
4
5
4615
1154
513
288
185
Aperture
mask
h (m) E (lx)
(mm)
D (m)
22
0.40
0.80
1.20
1.60
2.00
650
76554.000 White (RAL9002) ECG
76555.000 Silver ECG
HIT-CE 70W G12 6600lm
Weight 6.40kg
3590
898
399
224
144
26
0.50
1.00
1.50
2.00
2.50
Switch for calling up speed and rotational direction (12 programs). Pushbutton for setting the reference position. LED function indicator.
Goborotator attachment removable for
lamp replacement without tools. Screw
fixing.
Available as of 3rd quarter of 2008
Accessories page 171
Projection lens for soft-edged effect
lighting.
Thermally optimised housing without
fan: high-temperature plastic. Non-slip
surface with geometrically arranged
dimples. 0°-90° tilt. Bracket: cast aluminium, powder- coated, on the mechanical adapter rotatable through 360°.
Only for ceiling mounting.
Electronic control gear.
2 ERCO 3-circuit adapters with cable:
plastic.
Reflector: aluminium, silver anodised. IR
filter.
Goborotator attachment: plastic.
Two rotatable receptacles for gobos
(ø 66mm). Projection lens, 50mm focal
length, focusable.
Two elastically mounted stepping
motors, 4s/1 to 360s/1. Hall sensors
for adjusting the gobos. Low-noise
toothed-belt drive.
1
2
3
4
5
D (m)
HIT-CE
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Aperture
mask
h (m) E (lx)
(mm)
630
www.erco.com
1
2
3
4
5
1226
306
136
72
49
D (m)
33
0.60
1.20
1.80
2.40
3.00
Aperture
mask
h (m) E (lx)
(mm)
640
1
2
3
4
5
1188
297
132
74
47
D (m)
44
0.80
1.60
2.40
3.20
4.00
Aperture
mask
h (m) E (lx)
(mm)
650
1
2
3
4
5
ERCO Program 2008/09
901
277
123
69
44
D (m)
53
1.00
2.00
3.00
4.00
5.00
169
Emanon Projector spotlight with Goborotator and DALI adapter for metal halide lamps
With projection lens for precise projections.
Thermally optimised housing without
fan: high-temperature plastic. Non-slip
surface with geometrically arranged
dimples. 0°-90° tilt. Bracket: cast aluminium, powder- coated, on the mechanical adapter rotatable through 360°.
Only for ceiling mounting.
Electronic control gear, switchable.
2 ERCO DALI adapters with cable for
DALI track: plastic.
Reflector: aluminium, silver anodised. IR
filter.
Goborotator attachment: plastic.
Two rotatable receptacles for gobos
(ø 66mm). Lens 1:1,7/100mm, focusing
± 10mm.
Two elastically mounted stepping
motors, 4s/1 to 360s/1. Hall sensors
for adjusting the gobos. Low-noise
toothed-belt drive.
76560.000 White (RAL9002) ECG DALI
76561.000 Silver ECG DALI
HIT-CE 70W G12 6600lm
Weight 6.65kg
$!,)
The speed and rotational direction are
recalled through the Light System DALI
software. LED function indicator.
Goborotator attachment removable for
lamp replacement without tools. Screw
fixing.
Available as of 3rd quarter of 2008
Accessories page 171
HIT-CE
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Aperture
mask
h (m) E (lx)
(mm)
630
1
2
3
4
5
5000
1250
556
313
200
D (m)
16
0.30
0.60
0.90
1.20
1.50
640
1
2
3
4
5
4615
1154
513
288
185
D (m)
22
0.40
0.80
1.20
1.60
2.00
Projection lens for soft-edged effect
lighting.
Thermally optimised housing without
fan: high-temperature plastic. Non-slip
surface with geometrically arranged
dimples. 0°-90° tilt. Bracket: cast aluminium, powder- coated, on the mechanical adapter rotatable through 360°.
Only for ceiling mounting.
Electronic control gear, switchable.
2 ERCO DALI adapters with cable for
DALI track: plastic.
Reflector: aluminium, silver anodised. IR
filter.
Goborotator attachment: plastic.
Two rotatable receptacles for gobos
(ø 66mm). Projection lens, 50mm focal
length, focusable.
Two elastically mounted stepping
motors, 4s/1 to 360s/1. Hall sensors
for adjusting the gobos. Low-noise
toothed-belt drive.
Aperture
mask
h (m) E (lx)
(mm)
650
1
2
3
4
5
3590
898
399
224
144
D (m)
26
0.50
1.00
1.50
2.00
2.50
The speed and rotational direction are
recalled via the Light System DALI software. LED function indicator.
Goborotator attachment removable for
lamp replacement without tools. Screw
fixing.
Available as of 3rd quarter of 2008
Accessories page 171
$!,)
76552.000 White (RAL9002) ECG DALI
76553.000 Silver ECG DALI
HIT-CE 70W G12 6600lm
Weight 6.45kg
Aperture
mask
h (m) E (lx)
(mm)
HIT-CE
Measured illuminance levels (new
values) E (lx) and beam diameters D (m)
dependent on aperture mask and projection distance h (m)
Aperture
mask
h (m) E (lx)
(mm)
630
170
ERCO Program 2008/09
1
2
3
4
5
1226
306
136
72
49
D (m)
33
0.60
1.20
1.80
2.40
3.00
Aperture
mask
h (m) E (lx)
(mm)
640
1
2
3
4
5
1188
297
132
74
47
D (m)
44
0.80
1.60
2.40
3.20
4.00
Aperture
mask
h (m) E (lx)
(mm)
650
1
2
3
4
5
901
277
123
69
44
D (m)
53
1.00
2.00
3.00
4.00
5.00
www.erco.com
75
80
0.0
00
74
40
6.0
00
74
40
5.0
00
74
48
4.0
00
74
48
5.0
00
74
44
7.0
00
74
44
8.0
00
74
44
9.0
00
74
45
0.0
00
75
92
6.0
00
75
92
7.0
00
75
92
8.0
00
75
92
9.0
00
75
93
0.0
00
75
93
1.0
00
Emanon Accessories
76550.000
76551.000
76552.000
76553.000
76554.000
76555.000
76556.000
76557.000
76558.000
76559.000
76560.000
76561.000
76562.006
76563.006
76564.000
76565.000
76566.006
76567.006
76568.006
76569.006
76570.006
76571.006
76572.000
76573.000
76574.000
76575.000
76576.000
76577.000
74406.000
UV filter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
74405.000
IR filter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
74484.000
Skintone filter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
74485.000
Daylight conversion filter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
74447.000
Interference colour filter
Magenta
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
74448.000
Interference colour filter
Amber
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
74449.000
Interference col-