R EPRESENTATIVE O FFICES
C L
A
I N G
D D
AUSTRALIA
Specialised Ceiling Systems Pty Ltd
715 - 717 Port Road
Woodville Park SA 5012
Ph: (08) 268 6322
Fx: (08) 268 6083
Ceilings By Design
1 / 24 Porter Street
Hemmant Qld 4174
Ph: (07) 3890 7600
Fx: (07) 3890 7622
Solarshield Ceilings
73 Powers Road
Seven Hills NSW 2147
Ph: (02) 9620 9655
Fx: (02) 9620 9799
Metal Building Systems
2 - 6 McWilliam Street
Springvale Vic 3171
Ph: (03) 9562 3711
Fx: (03) 9562 4077
MALAYSIA
Perangsang Remuda
27 - 1 Jalan 5 / 76B Desan Pandan
55100 Kuala Lumpur Malaysia
Ph: (603) 981 4643
Fx: (603) 981 6648
HONG KONG
Chevalier Ltd
22nd Fl., 8 Wang Hoi Road
Kowloon Bay, Hong Kong
Ph: (852) 2 318 1818
Fx: (852) 2 798 0432
SINGAPORE
Framework Building Products
58 Tuas Basin Link
Jurong 2263 Singapore
Ph: (65) 861 5838
Fx: (65) 861 3387
UNITED ARAB
EMIRATES
Khalidia Intersystems
PO Box 46554
Abu Dhabi U.A.E.
Ph: (971) 2 679 5497
Fx: (971) 2 679 4030
NEW ZEALAND
Forman Building Systems
20 vestey Drive
Mt Wellington Auckland
Ph: (649) 276 4000
Fx: (649) 276 4141
M E T A L
Y
S
T
E
M
S
Architectural Ceiling Systems has constructed a state of the art Acoustic Laboratory in
Western Australia for use by all industry Australia wide and Internationally. It’s designed
to carry out a full range of acoustic tests, including sound absorption, sound power
and sound transmission loss performance of Ceiling Systems and room to room sound
loss in accordance with AS 2499.
A MEMBER OF
Distributor:
ARCHITECTURAL
CEILING SYSTEMS PTY
LTD
INCORPORATED IN WESTERN AUSTRALIA
ABN 86 008 782 161
CEILINGS DESIGN, MANUFACTURE
INSTALLATION & CONSULTANT SERVICES
HEAD OFFICE: 1-3 Irvine Street (P.O. Box 93)
Bayswater, Western Austraila 6053
Telephone: (08) 9271 0777
Fax: Nat. (08) 9272 2801, Inter. + 61 8 9272 2801
Website: www.architecturalceilingsystems.com.au
Email: acoustics@architecturalceilingsystems.com.au
Revision March 2002
Architectural Ceiling
Systems Pty Ltd
P ROFILE 230
PRODUCT PROFILE
PRODUCT PROFILE
ACS TOP HAT CARRIER RAIL
The system provides Architects,
DECKFORM
Designers and Building owners with a
Provide ACS 13 Top Hat Carrier Rails, spaced at 1200mm
flat, smooth uninterrupted surface for
signage or sign writing.
apart, fixed to the support framing and spanning not
more than 1500mm between supports.
The Carrier Rails shall provide machine spaced and
shaped clips to accept Deckform Cladding panels at
Deckform Cladding face panels are
produced from 0.75mm BMT Zincalume
which provides a high impact
resistance.
exactly 150mm centres.
Deckform Cladding panels shall be Cold Roll
formed strip and finished to a colour to be selected from
the ACS Colour Range.
The panels shall have a purpose Rolled flat closed
profile with a central rib 11.0 x 0.50mm deep, panels are
Available in either Colorbond or Post
painted, colour selections from ACS and
BHP standard ranges.
The 150mm module face panels
to be profiled so as to provide a secure interlocking,
S PECIFICATIONS
HEAVY DUTY
CLADDING SYSTEM
COMMENCEMENT CLIP
HIGH LOW PROFILE
RIBBED CLADDING
Profile 230 offers Designers the choice
PROFILE 230
of Vertical or Horizontal panel aspect
Provide ACS 16 Cold Roll formed PROFILE 230
installations.
panelling direct fixed to the support framing by
means of Hex Head Tek screws at maximum 1200mm
All panels are concealed fixed to the
support framing. Framing can be either
the main structure sub-frame or
alternatively a Proprietory primary
sections for Fascia and Soffit
Profile 230 ideally suits Retail,
isolate all dissimilar metals with an inert membrane.
Institutional, Commercial and Industrial
applications providing a desirable and
Install matching colour finished Flashings, Corner
Moulds, Purpose folded Panels and Sections as detailed.
low maintenance Fascia and Soffit lining
PANEL SPAN CHART Note - caution, the spans shown below are correct
system.
applications, providing a monolithic
appearance.
carriers should be spaced at 1200mm centres along the panel lengths.
0.75mm
0.55mm
Fascia
145Km/H Wind
Soffit
2200
2050
1950
1800
1800
1700
Profile 230 panels shall be pre-finished to a
colour to be selected from the ACS Colour Range.
carrier rail.
Fascia
120Km/H Wind
The Commencement Clips shall be fixed to the
support framing by means of Hex Head Tek screws.
All fasteners to be Zinc or Cadmium plated,
interconnecting assembly from panel to panel and
Thickness
ACS 16A Commencement Clips shall be
installed to accept the first panel in each run or bay.
framing system from ACS is available.
in respect of structural ability. For best performance and appearance
interlock on to proprietary carrier rail
centres along the panel length.
THERMAL EXPANSION
0.36mm per metre length per 10 deg. C. change.
ACCESSORIES
The panel is produced from Zincalume
0.40mm BMT in either a Colorbond or
Post painted finish (Baked Enamel or
PARAPET CAP
CASING TRIM
Powder Coat).
ACCESSORIES
Finishes available are:●
Colorbond
●
Baked Enamel
●
Powder Coat
Deckform Cladding face panels are
Colour selections available are from
FLAT NOTCHED CARRIER
ACS UNIVERSAL CARRIER RAIL
the ACS and BHP standard ranges.
BASE MOULD A
EXTERNAL CORNER
BASE MOULD B
INTERNAL CORNER
also available in a 0.55mm BMT option,
providing a more economical solution
More Design Opportunity
to those less demanding applications.
EXTERNAL CORNER
HEAVY DUTY STUD CARRIER
All other flashings or folded panel sections to requirements.
Product profiles are not to scale and are representative of
design and profile.
F l ex i b i l i t y i n D e s i g n
INTERNAL CORNER
All other flashings or folded panel sections to requirements.
Product profiles are not to scale and are representative of
design and profile.
S PECIFICATIONS
D ECKFORM
P ROFILE 230
PRODUCT PROFILE
PRODUCT PROFILE
ACS TOP HAT CARRIER RAIL
The system provides Architects,
DECKFORM
Designers and Building owners with a
Provide ACS 13 Top Hat Carrier Rails, spaced at 1200mm
flat, smooth uninterrupted surface for
signage or sign writing.
apart, fixed to the support framing and spanning not
more than 1500mm between supports.
The Carrier Rails shall provide machine spaced and
shaped clips to accept Deckform Cladding panels at
Deckform Cladding face panels are
produced from 0.75mm BMT Zincalume
which provides a high impact
resistance.
exactly 150mm centres.
Deckform Cladding panels shall be Cold Roll
formed strip and finished to a colour to be selected from
the ACS Colour Range.
The panels shall have a purpose Rolled flat closed
profile with a central rib 11.0 x 0.50mm deep, panels are
Available in either Colorbond or Post
painted, colour selections from ACS and
BHP standard ranges.
The 150mm module face panels
to be profiled so as to provide a secure interlocking,
S PECIFICATIONS
HEAVY DUTY
CLADDING SYSTEM
COMMENCEMENT CLIP
HIGH LOW PROFILE
RIBBED CLADDING
Profile 230 offers Designers the choice
PROFILE 230
of Vertical or Horizontal panel aspect
Provide ACS 16 Cold Roll formed PROFILE 230
installations.
panelling direct fixed to the support framing by
means of Hex Head Tek screws at maximum 1200mm
All panels are concealed fixed to the
support framing. Framing can be either
the main structure sub-frame or
alternatively a Proprietory primary
sections for Fascia and Soffit
Profile 230 ideally suits Retail,
isolate all dissimilar metals with an inert membrane.
Institutional, Commercial and Industrial
applications providing a desirable and
Install matching colour finished Flashings, Corner
Moulds, Purpose folded Panels and Sections as detailed.
low maintenance Fascia and Soffit lining
PANEL SPAN CHART Note - caution, the spans shown below are correct
system.
applications, providing a monolithic
appearance.
carriers should be spaced at 1200mm centres along the panel lengths.
0.75mm
0.55mm
Fascia
145Km/H Wind
Soffit
2200
2050
1950
1800
1800
1700
Profile 230 panels shall be pre-finished to a
colour to be selected from the ACS Colour Range.
carrier rail.
Fascia
120Km/H Wind
The Commencement Clips shall be fixed to the
support framing by means of Hex Head Tek screws.
All fasteners to be Zinc or Cadmium plated,
interconnecting assembly from panel to panel and
Thickness
ACS 16A Commencement Clips shall be
installed to accept the first panel in each run or bay.
framing system from ACS is available.
in respect of structural ability. For best performance and appearance
interlock on to proprietary carrier rail
centres along the panel length.
THERMAL EXPANSION
0.36mm per metre length per 10 deg. C. change.
ACCESSORIES
The panel is produced from Zincalume
0.40mm BMT in either a Colorbond or
Post painted finish (Baked Enamel or
PARAPET CAP
CASING TRIM
Powder Coat).
ACCESSORIES
Finishes available are:●
Colorbond
●
Baked Enamel
●
Powder Coat
Deckform Cladding face panels are
Colour selections available are from
FLAT NOTCHED CARRIER
ACS UNIVERSAL CARRIER RAIL
the ACS and BHP standard ranges.
BASE MOULD A
EXTERNAL CORNER
BASE MOULD B
INTERNAL CORNER
also available in a 0.55mm BMT option,
providing a more economical solution
More Design Opportunity
to those less demanding applications.
EXTERNAL CORNER
HEAVY DUTY STUD CARRIER
All other flashings or folded panel sections to requirements.
Product profiles are not to scale and are representative of
design and profile.
F l ex i b i l i t y i n D e s i g n
INTERNAL CORNER
All other flashings or folded panel sections to requirements.
Product profiles are not to scale and are representative of
design and profile.
S PECIFICATIONS
D ECKFORM
R EPRESENTATIVE O FFICES
C L
A
I N G
D D
AUSTRALIA
Specialised Ceiling Systems Pty Ltd
715 - 717 Port Road
Woodville Park SA 5012
Ph: (08) 268 6322
Fx: (08) 268 6083
Ceilings By Design
1 / 24 Porter Street
Hemmant Qld 4174
Ph: (07) 3890 7600
Fx: (07) 3890 7622
Solarshield Ceilings
73 Powers Road
Seven Hills NSW 2147
Ph: (02) 9620 9655
Fx: (02) 9620 9799
Metal Building Systems
2 - 6 McWilliam Street
Springvale Vic 3171
Ph: (03) 9562 3711
Fx: (03) 9562 4077
MALAYSIA
Perangsang Remuda
27 - 1 Jalan 5 / 76B Desan Pandan
55100 Kuala Lumpur Malaysia
Ph: (603) 981 4643
Fx: (603) 981 6648
HONG KONG
Chevalier Ltd
22nd Fl., 8 Wang Hoi Road
Kowloon Bay, Hong Kong
Ph: (852) 2 318 1818
Fx: (852) 2 798 0432
SINGAPORE
Framework Building Products
58 Tuas Basin Link
Jurong 2263 Singapore
Ph: (65) 861 5838
Fx: (65) 861 3387
UNITED ARAB
EMIRATES
Khalidia Intersystems
PO Box 46554
Abu Dhabi U.A.E.
Ph: (971) 2 679 5497
Fx: (971) 2 679 4030
NEW ZEALAND
Forman Building Systems
20 vestey Drive
Mt Wellington Auckland
Ph: (649) 276 4000
Fx: (649) 276 4141
M E T A L
Y
S
T
E
M
S
Architectural Ceiling Systems has constructed a state of the art Acoustic Laboratory in
Western Australia for use by all industry Australia wide and Internationally. It’s designed
to carry out a full range of acoustic tests, including sound absorption, sound power
and sound transmission loss performance of Ceiling Systems and room to room sound
loss in accordance with AS 2499.
A MEMBER OF
Distributor:
ARCHITECTURAL
CEILING SYSTEMS PTY
LTD
INCORPORATED IN WESTERN AUSTRALIA
ABN 86 008 782 161
CEILINGS DESIGN, MANUFACTURE
INSTALLATION & CONSULTANT SERVICES
HEAD OFFICE: 1-3 Irvine Street (P.O. Box 93)
Bayswater, Western Austraila 6053
Telephone: (08) 9271 0777
Fax: Nat. (08) 9272 2801, Inter. + 61 8 9272 2801
Website: www.architecturalceilingsystems.com.au
Email: acoustics@architecturalceilingsystems.com.au
Revision March 2002
Architectural Ceiling
Systems Pty Ltd