Technology Metals | Advanced Ceramics
Overspray Recycling: Smart,
­Sustainable, Economical
The Solution for Enhancing Your
Raw Material Efficiency
Two Challenges ...
> Raw Material Efficiency: For technical reasons, thermal spraying is associated with a relatively high volume of overspray.
>
Disposal: The recent regulatory requirements dictated by the thermal spraying industry regarding the handling and
disposal of materials, scrap, and by-products have become stricter due to REACH* regulation.
… One Solution:
>H.C. Starck’s Overspray Recycling enhances the raw material efficiency in thermal spraying as it returns the overspray
into its own tungsten and rhenium production. Here it is reprocessed into raw materials for our high-quality A
­ MPERIT®
products. Collection, transportation and treatment are fully in line with legal provisions, contributing to the safe disposal
of overspray.
Benefit from partnering with H.C. Starck: As a raw materials processor, we meet and exceed our customer’s expectations.
Overspray Recycling:
Smart, Sustainable, Economical
>> SIMPLE DISPOSAL of overspray according to legal guidelines**
>> SUSTAINABLE RAW MATERIAL USAGE by returning the overspray into the
tungsten and rhenium production at H.C. Starck
>> ECONOMICAL IMPLEMENTATION through cost-efficient and fast material
analysis, transparent value assessment, as well as optimum support in
handling and transportation
*REACH is a European Community Regulation (EC) 1907/2006 by the EU Parlament and Council from December 18, 2006, concerning the registration, evaluation, authorization
and restriction of chemicals. It aims to regulate and control potential hazards and risks for human health and the environment associated with the production, import and
use of chemicals within the European Union. The REACH regulation targets are important guidelines for H.C. Starck.
**For further Information regarding overspray classification and handling, please contact our sales department
Fast, Reliable, Flexible:
Our Full-Service for Overspray Recycling
We simplify the disposal of your overspray as much as possible – see for yourself:
$
H.C. Starck
USE
COLLECTION
TRANSPORTATION
ASSESSMENT
Certified H.C. Starck
­material: High-quality
­powders from certified
sources and in-house
production
Provision of drums, labels
(Re-MCrAIY, WC-Co, WC-Ni) as
well as legally required documentation and packaging for
handling and transportation
of overspray (safety data
sheets, transportation labels,
legally conform transportation
packaging material)
Transportation handling
by H.C. Starck after sending
an appropriate fax form to
our purchasing department
(perfect also for smaller
­volumes up to 50 kg)
Cost-efficient and fast
material analysis as well
as value assessment
based on current raw
material prices
Closed Loop: Sustainable Raw Material Usage
Without Loss of Quality
The closed loop overspray recycling process is an integrated cycle that ensures sustainable raw materials usage. The
­chemical decomposition of the overspray eliminates any impact of the recycling process on product quality. This way,
we contribute to both stabilizing raw material supply and preserving our natural resources.
Thermal Treatment
> Conversion
Chemical Decomposition
> Purification
Raw Material for
AMPERIT®-Production
H.C. Starck Technological Expertise
Tungsten and Rhenium Overspray
Overspray
Spray Shop / OEM
Thermal Spraying
OEM
High-Quality
AMPERIT®Powders
H.C. Starck GmbH
Im Schleeke 78 - 91
38942 Goslar
Germany
Global Sales
T +49 5321 751 - 3753
F +49 5321 751 - 4753
amperit.europe@hcstarck.com
Application Engineering
T +49 5321 751 - 3170
F +49 5321 751 - 4170
amperit.technicalsupport@hcstarck.com
DPAP 04/14
The conditions of your use and application of our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative
that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis at least must include testing to determine suitability from a technical as
well as health, safety, and environmental standpoint. Such testing has not necessarily been done by H.C. Starck. All information is given without warranty or guarantee. It is expressly understood and agreed that the customer assumes and hereby expressly releases H.C. Starck
from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind H.C. Starck. Nothing herein shall be construed
as a recommendation to use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent. Properties of the products referred to herein shall as general rule not be classed as information on the
properties of the item for sale. In case of order please refer to issue number of the respective product data sheet. All deliveries are based on the latest issue of the product data sheet and the latest version of our General Conditions of Sale and Delivery.
The values in this publication are typical values and do not constitute a specification.
info@hcstarck.com
www.hcstarck.com