Data Sheet
EIBA Series
EIBA Building Automation System
(BAS) Ethernet Switch
• Powered from an unregulated DC power
source (10–36 V) or from an AC power
source (8–24 V, 47–63 Hz). Power is
provided through a quick-disconnect
terminal strip.
• Broadcast storm control
• Full- or half-duplex operation
• Activity/link and data rate LEDs
• Compact size
• Industrial environment EMC compatible
• 10BASE-T/100BASE-TX compliant
• UL 508 Listed, Industrial Control Equipment
• Auto-MDIX ports
• C-UL Listed, CSA 22.2 No. 14-M91,
Industrial Control Equipment
• Auto-negotiated data rate, duplex, and
flow control
• DIN-rail and panel mountable versions
• CE Mark
• RoHS compliant
PRODUCT OVERVIEW
There is an expanding need for Ethernet switches
in many of the new Building Automation Systems (BAS).
The Plug-and-Play (PnP) EIBA switches provide the needed
functionality, mounting convenience, and ruggedness to fill
those applications. The popular EIBA5-100T which is
designed for panel mounting is complemented by its DIN-rail
cousin, the EIBA5-100T/R.
Utilising switching technology, the compact and low-cost EIBA
switches provide five 10/100 Mbps shielded RJ-45 ports.
Each port is Auto-MDIX compliant and can operate as an
uplink port, eliminating the need for crossover cables. All
ports automatically negotiate data rate, duplex, and flow
control.
EIBA switches address a key issue in building
automation systems and that is convenient mounting in control panels. Office-grade equipment is intended
for desktops, requiring a separate power supply powered
from a 120/230 Volt AC mains circuit. In this situation, a
shelf would be constructed to mount the unit and a receptacle
would be installed inside the control panel. However, EIBA
switches mount in sub-panels and operate from the same
source that powers other BAS equipment, making the
TD030600-0DC
installation neat and rugged. These devices accept a widerange, low-voltage AC or DC power source.
The LEDs on these units face the technician for easy network
troubleshooting. The label on the device can be written upon
so port connections can be documented as to the location of
connected equipment. Each port LED glows solid if a link
exists, flashes to show activity and shows data rate by
colour: green for 100 Mbps and yellow for 10 Mbps. One
power LED is provided.
Unlike office-grade equipment, EIBA units are
designed for commercial and industrial applications. The switches have a wider operating temperature
range and comply with global industrial electromagnetic
compatibility standards so there is no concern about
installing them in harsh environments. They are UL 508 Listed
for Industrial Control Equipment.
EIBA switches will function with any Ethernet application such
as BACnet/IP, BACnet/Ethernet and Metasys. Built-in
broadcast storm control prevents excessive broadcasts from
degrading network performance.
Page 1
Data Sheet
EIBA Building Automation System
(BAS) Ethernet Switch
Mechanical
CL
3.31”
84 mm
0.80”
20 mm
0.63”
16 mm
BAS Switch
0.80”
20 mm
PWR HI
CL
PWR COM
10-36 VDC 5W
8-24 VAC 5VA 47-63 Hz
Hi: DC+ or AC HI
Com: DC COM or AC LO
Class 2 Circuits Only
1
Port Indicators
Power
Yellow Solid
Yellow Flashing
Green Solid
Green Flashing
1
Indicators
4
BAS Switch
5
10/100 Mbps
1”
25.4 mm
COM HI
POWER
Specifications
10 Mbps Link
Yellow Solid
Yellow Flashing
10 Mbps Activity
Green Solid
100 Mbps Link
100 Mbps Activity
Green Flashing
Class 2 Circuits Only
3.5”
89 mm
3
EIBA5-100T Ethernet Switch
5
4
PORTS
2.88”
73 mm
2
3
2
10 Mbps Link
10 Mbps Activity
100 Mbps Link
100 Mbps Activity
TS-35 DIN-Rail
0.63”
16 mm
10-36 VDC 5W
8-24 VAC 5VA 47-63 Hz
Hi: DC+ or AC HI
Com: DC COM or AC LO
3.31”
84 mm
1
2
3
4
5
10/100 Mbps
EIBA5-100T/R Ethernet Switch
4EA4
1
3.63”
92 mm
1.25”
32 mm
4.13”
105 mm
EIBA5-100T
2
3
4EA4
4
3.5”
89 mm
Panel Mount
EIBA5-100T/R
5
0.97”
24.6 mm
0.16”
4 mm
DIN-rail Mount
Power Diagrams
PWR HI
PWR HI
PWR COM
PWR COM
(customer
supplied)
(customer
supplied)
optional chassis connection
AC Powered
optional chassis connection
AC Powered with Grounded Secondary
PWR HI
PWR COM
(customer
supplied)
optional chassis connection
DC Powered
Specifications
Electrical
Input voltage
Input power (max)
Input frequency
DC
10–36 Volts
5W
N/A
Environmental
Operating temperature
Storage temperature
Relative humidity
Protection
0°C to +60°C
–40°C to +85°C
10–95% non-condensing
IP30
Functionality
Standards
Process type
Data rate
Signalling
Connectors
Segment length
LED indicators
Flow control
Aging
TD030600-0DC
AC
8–24 Volts
5 VA
47–63 Hz
IEEE 802.3
Store-and-Forward
10/100 Mbps
10BASE-T/100BASE-TX
Shielded RJ-45
100 m (max)
Link (L)
Yellow – 10 Mbps, Green – 100 Mbps
Flashing – Green
Half-Duplex (Backpressure)
Full-Duplex (IEEE 802.3x – PAUSE)
200 to 300 seconds
Page 2
Data Sheet
MDI-X 1
RJ-45
1
2
3
4
5
6
7
8
10BASE–T/100BASE-TX
Usage
TD+
TD–
RD+
Not Used
Not Used
RD–
Not Used
Not Used
EIBA Building Automation System
(BAS) Ethernet Switch
1
Ports normally assume the internal crossover function,
but will automatically adapt to connected devices.
Electromagnetic Compatibility
Standard
Test Method
EN 55024
EN 61000-4-2
EN 55024
EN 61000-4-3
EN 55024
EN 61000-4-4
EN 55024
EN 61000-4-5
EN 55024
EN 61000-4-6
EN 55024
EN 61000-4-11
EN 55022
CISPR 22
EN 55022
CISPR 22
CFR 47, Part 15
ANSI C63.4
Description
Electrostatic Discharge
Radiated immunity
Fast Transient Burst
Voltage Surge
Conducted Immunity
Voltage Dips & Interruptions
Radiated Emissions
Conducted Emissions
Radiated Emissions
Test Levels
6 kV Contact & 8 kV Air
10 V/m 80 MHz to 1 GHz
1 kV Clamp & 2 kV Direct
1 kV L to L & 2 kV L to Earth
10 Volts (rms)
1 Line Cycle to 5 sec. @ 100% dip
Class A
Class B
Class A
Ordering Information
Copper Only
Model
EIBA5-100T
EIBA5-100T/R
Description
Five-port 10BASE-T/100BASE-TX switch, Panel mount
Five-port 10BASE-T/100BASE-TX switch, DIN-rail mount
Accessories
Model
AI-XFMR
AI-XFMR-E
Description
Wall-mount plug-in transformer 120V AC (nom) input/24V AC (nom) output
Wall-mount plug-in transformer 230V AC (nom) input/24V AC (nom) output
Contemporary Controls, ARC Control, ARC DETECT, EXTEND-A-BUS and CTRLink are registered trademarks
or trademarks of Contemporary Control Systems, Inc. Specifications are subject to change without notice.
Other product names may be trademarks or registered trademarks of their respective companies.
©Copyright 2007 Contemporary Control Systems, Inc.
www.ccontrols.com
Contemporary Control Systems, Inc.
2431 Curtiss Street
Downers Grove, Illinois 60515 USA
Telephone 630 963-7070
Fax 630 963-0109
TD030600-0DC
January 2007
Page 3