Material safety data sheet
According to UE 91/155/CEE and ISO 11014
1- Identification
Commercial name :
NetShape® PEEK-CA30
Supplier identification :
NetShape S.A.S.
19, rue Jules Ferry
ZI le Pontet
69360 Saint Symphorien D’Ozon – France
Tél. : +33 (0)4 78 89 15 14
Fax : +33 (0)4 78 93 32 45
E-mail : netshape@netshape.fr
Emergency phone number : :
2- Composition and information on ingrédients
This product is a chemical substance
Chemical caraterisation :
Synonym :
Polyetheretherketone with carbon fibres
Chemical structure : PEEK
CAS Nr (Chemical Abstract Service Registration Number)
Polymer :
Additive 1 : carbon fibres
Additive 2 : none
CAS nr : 29658-26-2
CAS nr : 7782-42-5
CAS nr :
3- Hazards identification
Critical hazards :
No critical hazards for men and environment in case of normal storing,
handling and usage.
N.A.
Specific hazards :
4- First aid measures
Inhalation :
Skin contact :
In case the plastic burns and combustion gases are inhaled, immediately leave the
room and get medical help.
In case molten material comes in contact with the skin, the skin need to be rinsed
abundently with cold water. Do no try to remove the molten material. Get medical
assistance for the removal of the tacky material and for medical care of the burn.
5- Fire-fighting measures
Suitable extinguishing media :
Water, foam, dry chemical, CO2
Extinguishing media which must not
none
be used for safety reasons :
Special exposure hazards arising from substance or preparation itself, combustion products or resulting
gases : see section 10
Special protective equipement for fire-fighters :
Self contained breathing apparatus and protective clothings
6- Accidental release measures
Personal protection :
Environmental precautions :
Methods for cleaning up :
N.A. = not applicable
NetShape® PEEK-CA30
N.A.
see section 12 & 13
see section 13
Material safety data sheet 15/04/2001
page 1 / 3
Material safety data sheet
According to UE 91/155/CEE and ISO 11014
7- Handling and storage
Handling
Technical measures :
Précautions :
Safe handling advise :
To respect the usual instructions for the handling of the loads.
N.A.
During the machining of the stock shapes, evacuate swarf to
prevent slipping or tripping hazards.
Storage
Technical measures :
Safe storage conditions :
Avoid long term exposition to UV
Inert under normal storage conditions. Avoid contact or
proximity with an ignition source.
N.A.
N.A.
Incompatible products :
Safe packaging materials :
8- Exposure controls / personal protection
Engineering measures to minimize worker exposure: Apply industrial safety rules.
Personal protection
Respiratory protection :
None, except when product burns. If exposed to combustion
fumes in a high concentration, bring the victim into fresh air.
Gloves for handling and in case of contact with warm
material.
Safety goggles during machining
Hand protection :
Eyes protection :
9- Physical and chemical properties
Appearance :
Form :
Stock shapes (sheet/plate, rod and tube)
Color :
black
Odor :
no special odor
Change in physical state :
Boiling point/boiling range °C :
N.A.
Melting point/melting range °C :
340
Glass transition temperature °C :
N.A.
Flash point : °C :
N.A.
Vapour pressure :
N.A.
Self ignition temperature °C : (ASTM D 1929) :
595
pH :
N.A.
3
Density(23°C) g/cm : (ISO 1183) :
1.41
Solubility in water :
negligible
°
Thermal decomposition temperature C :
> 400
10- Stability and reactivity
Stability :
Conditions to avoid :
Hazardous decomposition products :
Specific hazardous decomposition
products :
Stable in normal circumstances.
Temperatures above the melting point / melting range. (see
section 9)
H2O, CO2, CO depending on the amount of available
environmental oxygen
-
11- Toxicological informations
Acute toxicity :
Local effects :
In solid state, this material is not considered as being harmful to human health.
N.A.
N.A. = not applicable
NetShape® PEEK-CA30
Material safety data sheet 15/04/2001
page 2 / 3
Material safety data sheet
According to UE 91/155/CEE and ISO 11014
12- Ecological informations
This material do not harm the environment but is not biodegradable.
13- Disposal considerations
Residual waste :
Contaminated packaging :
When recycling is impossible, incineration or landfill. Disposal
methods must conform to local or other government
regulations. This product does not contain cadmium pigments
or cadmium stabilizers.
N.A.
14- Transports informations
International regulations :
Local regulations :
N.A.
To verify according Country, state, province or area
15- Regulatory informations
Classification and labelling according to the relevant EU-directives : Not required
16- Other informations
See technical data sheet
Note
All information supplied by or on behalf of NetShape in relation to its products, wether in the nature of data, recommendations or
otherwise, is supported by research and believed reliable, but NetShape assumes no liability whatsoever in respect of application,
processing or use made of the afore mentioned informations or products, or any consequence therof. The user undertakes all liability in
respect of the application, processing or use of the afore mentioned informations or products, whose quality and other properties he
shall verify, or any consequence thereof. No liability whatsoever shal attach to NetShape for any infringement of the rights owned or
controlled by a third party in intellectual, industrial or other property by reason of the application, processing or use of the afore
mentioned informations or products by the user.
N.A. = not applicable
NetShape® PEEK-CA30
Material safety data sheet 15/04/2001
page 3 / 3