Thermal Heads for Power and Single-Shot Energy – mW to
KW, mJ to 300J
The highest damage threshold in the industry
Models for 1500W 5000W, 8000W and 20KW for high power laser measurement
LP coating that can withstand up to 6KW/cm2 at the maximum rated head power
Energy damage threshold up to 250J/cm2
EMI rejection
Single pulse energy measurement up to 200 joules
Sensitive meters to measure power down to 40 W and energy to 7 J
www.ophiropt.com
32
Thermal Surface Absorbing Heads
Laser Power
& Energy
(For pulses shorter than 100µs see volume absorber section on page 46)
3A
CW & Pulsed Measurements 60 W-3W 15 J-2J
Recommended Use: Very low power and energy lasers
Special Features: Very sensitive, low noise, fast response
Heads
BB pyro 0.19 - 20µm
Ø9.6mm
3W / 300mW / 30mW / 3mW / 300µW
200W/cm2
2µW
5 - 20µW a
±3%
1.5s
0.3J/cm2 for 10ns pulses
±1.5%
2J / 200mJ / 20mJ / 2mJ / 200µJ
15µJ
±2% ±2µJ
See drawing
Convection
48
30
Ø70
Ø9.5
19
Ø23
97-143
ADJUSTABLE
30o
100
75
Note a: Depending on typical room airflow and temperature variations
Displays
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Thermal drift (30 min):
Power Accuracy:
Response Time with Display (0 - 95%):
Maximum Energy Density:
Linearity with Power:
Energy Scales:
Energy Threshold:
Linearity with energy:
Dimensions:
Cooling:
3A
3A-FS
CW & Pulsed Measurements 40 W-3W 7 J-2J
Notes a: For measurement beyond 2.5µm and up to 20µm, window should be removed. Noise and drift will be higher
b: Depending on typical room airflow and temperature variations
3A-FS
34
30
Ø9.5
Ø70
19
Ø25
Ø23
30˚
97 - 143
ADJUSTABLE
75
100
Ordering Information
Item
3A
3A-FS
Fiber Adapters
Description
3 Watt power/energy meter for low power lasers
3 Watt power/energy meter for low power lasers with removable fused silica window
See page 55 for ordering information
www.ophiropt.com
33
Integrated Systems
Broadband, 0.19 - 2.5µm a
Ø9.6mm
3W / 300mW / 30mW / 3mW / 300µW
200W/cm2
2µW
2 - 10µW b
±3%
1.5s
0.3J/cm2 for 10ns pulses
±1.5%
2J / 200mJ / 20mJ / 2mJ / 200µJ
7µJ
±2% ±1.5µJ
See drawing
Convection
Ophir P/N
1Z02621
1Z02628
OEM Products
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Thermal drift (30 min):
Power Accuracy:
Response Time with Display (0 - 95%):
Maximum Energy Density:
Linearity with Power:
Energy Scales:
Energy Threshold:
Linearity with energy:
Dimensions:
Cooling:
Beam Profile
Wavelength
Recommended Use: Very low power and energy lasers
Special Features: Removable fused silica window
Very sensitive, low noise, fast response. Paricularly suitable for thermally unstable environments
10A
CW & Pulsed Measurements 20mW-10W 6mJ-2J
Recommended Use: General, powers to 10W
Special Features: Compact, fast response
Broadband, 0.19 - 20µm
Ø16mm
10W / 5W / 0.5W
30KW/cm2
1mW
±3%
0.8s
±1%
2J / 200mJ
6mJ
Convection
33.5
Ø65
Ø16
Distance
from front
surface to
absorber
11.3mm
˚
10
75
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0 - 95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Cooling:
10A
ADJUSTABLE
92 - 127
75
100
12A
CW & Pulsed Measurements 2mW-12W 1mJ-30J
Recommended Use: Very low to low power and energy lasers
Special Features: Very wide dynamic range, low noise and drift
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Thermal drift (30 min):
Power Accuracy:
Response Time with Display (0 - 95%):
Maximum Energy Density:
Linearity with Power:
Energy Scales:
Energy Threshold:
Linearity with energy:
Dimensions:
Cooling:
Broadband, 0.19 - 20µm
Ø16mm
12W / 2W / 200mW / 20mW / 2mW
25KW/cm2
50µW
40-150µW a
±3%
2.5s
0.3J/cm2 for 10ns pulses
±1.5%
30J / 3J / 200mJ / 300mJ / 30mJ b
1mJ
±1.5% ±50µJ
See drawing
Convection
12A
38
Ø80
7
Ø16
45˚
ADJUSTABLE
19 102-134
44
ADJUSTABLE
107 - 150
43
ø85
Notes: a. Depending on typical room airflow and temperature variations.
b. For the 30mJ energy scale measurements it is recommended to use the attached snout
or to protect the head from direct air flow.
100
75
75
100
Ordering Information
Item
10A-V3
12A
Fiber adapters
Description
10 Watt power/energy meter for low power lasers
12 Watt power/energy meter for low power lasers
See page 55 for ordering information
www.ophiropt.com
34
Ophir P/N
1Z02637
1Z02638
30A
Recommended Use: General purpose powers to 30W
Special Features: Fast response, wide dynamic range
30A
Broadband, 0.19 - 20µm
Ø17.5mm
30W / 5W a
25KW / cm2
1mW
±3%
0.8s
±1%
30J / 3J b
6mJ
Convection
44
43
ø85
Ø17.5
Heads
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0 - 95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Cooling:
Laser Power
& Energy
CW & Single Pulse Measurements 20mW-30W 6mJ-30J
Notes: a. Use model 30(150)A-HE / HE1/HL for higher energies.
b. The maximum energy density even for long pulses is limited to 2J / cm2.
ADJUSTABLE
102-134
21.5
45o
75
Displays
100
L30A
CW & Single Pulse Measurements 80mW-30W 20mJ-30J
Broadband absorber 0.19 - 20µm
Ø29mm
30W/3W
25KW/cm2
4mW
±3%
1.5s
±1%
30J/3J/300mJ
20mJ
Convection
L30A
44
43
Ø29
Ø85
ADJUSTABLE
102-134
100
75
Integrated Systems
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Cooling:
Beam Profile
Wavelength
Recommended Use: Divergent beams, large aperture
Special Features: 29 mm aperture, 30 watts
Item
30A-V1
L-30A-V1
Fiber adapters
www.ophiropt.com
Description
30 Watt power/energy meter
Large aperture 30 Watt power/energy meter
See page 55 for ordering information
35
Ophir P/N
1Z02604
1Z02603
OEM Products
Ordering Information
L30A-10MM
CW & Single Pulse Measurements 80mW-30W 20mJ-60J
Recommended Use: Tight spaces, photolithography exposure
Special Features: Low profile – 10mm thick, 26mm aperture
Absorber:
Aperture:
Digital Power Scales:
Maximum Power:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Energy Threshold
Repeatability of Energy:
Max Width of Pulse train
Cooling:
Broadband absorber 0.15 - 20µm
Ø26mm
30W/3W
4W free standing, 30W heat sinked
25KW/cm2
4mW
±3%
1.5s
±1%
60J/20J/2J/200mJ
20mJ
0.5%
4s for measuring accumulated energy
Convection, conduction
L30A-10MM
10
Ø75
Ø26
55o
ADJUSTABLE
100-145
100
75
L50A
CW & Single Pulse Measurements 80mW-50W 20mJ-100J
Recommended Use: General purpose to 50W
Special Features: Large aperture, convection cooled
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Energy Threshold
Cooling:
Broadband, 0.19 - 20µm
Ø29mm
50W/5W
20KW/cm2
4mW
±3%
1.5s
±1%
100J / 30J / 3J / 300mJ
20mJ
Convection
L50A
Ø100
Ø29
47
18.5
ADJUSTABLE
110 - 135
100
75
Ordering Information
Item
L30A-10MM
L50A
Fiber adapters
www.ophiropt.com
Description
Large aperture 10mm thick 30 Watt power/energy meter
50 Watt power meter for general use
See page 55 for ordering information
36
Ophir P/N
1Z02273
1Z02606
30(150)A
Laser Power
& Energy
CW & Average Power Measurements 60mW-150W 20mJ-100J
Recommended Use: Short-term measurement to 150 watts
Special Features: Compact, convection cooled
30(150)A
Broadband, 0.19 - 20µm
Ø17mm
150W/30W a
20KW/cm2
3mW
±3%
1.2s
±1%
100J/30J/3J
20mJ
Convection
44
43
Ø85
Ø17
Heads
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Energy Threshold
Cooling:
ADJUSTABLE
102-134
Note a: Maximum continuous power is 30 Watts. Can be used intermittently to 150 watts.
75
Displays
100
L30(150)A-LP
CW & Pulsed Measurements 50mW-150W 80mJ-300J
Energy Threshold
Cooling:
LP 0.4 - 1.5, 10.6µm
Ø29mm
150W/30W/3W a
30W continuous, 150W intermittent
3mW
±3%
1.5s
±1%
300J/30J/3J
10ns
0.1J/cm2
2ms
50J/cm2
10ms
150J/cm2
25mJ
Convection
Beam Profile
Wavelength
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power:
Power Noise Level:
Power Accuracy:
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Maximum Energy Density J/cm2
L30(150)A-LP
44
43
Ø29
Ø85
ADJUSTABLE
102-134
Note a: Maximum continuous power is 30 Watts. Can be used intermittently to 150 watts.
100
75
Integrated Systems
Recommended Use: Long pulsed lasers
Special Features: High damage threshold for long pulses and CW
Item
30(150)A-V1
L30(150)A-LP
Fiber adapters
www.ophiropt.com
Description
30/150 Watt power/energy meter
Power meter for high energy pulses >1ms, 30W continuous, 150W intermittent
See page 55 for ordering information
37
Ophir P/N
1Z02608
1Z02636
OEM Products
Ordering Information
L40(150)A
CW & Average Power Measurements 200mW-150W 80mJ-200J
Recommended Use: Large beams, low profile, single shot energy
Special Features: Large aperture, slim profile
Absorber:
Aperture:
Digital Power Scales:
Maximum Power:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Energy Threshold
Cooling:
L40(150)A
Broadband, 0.19 - 20µm
Ø50mm
150W/20W
35W continuous, 150W intermittent
20KW/cm2
15mW
±3%
2.5s
±1%
200J/30J/3J
80mJ
Convection
90
(2x) M3
Mounting Threads
33
72
17
Ø50
ADJUSTABLE
107 - 152
75
100
L50(150)A
CW & Pulsed Measurements 200mW-150W 80mJ-200J
Recommended Use: Large aperture lasers
Special Features: Convection cooled, up to 50W CW, 150W intermittent
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Energy Threshold
Cooling:
L50(150)A
Broadband, 0.19 - 20µm
Ø50mm
150W/20W
50W continuous, 150W intermittent
20KW/cm2
6mW
±3%
2.5s
±1%
200J/30J/3J
80mJ
Convection
38.5
(5x) 3.5
(6x) 2.5
100
(2x) M3
Mounting Threads
100
16
Ø50
ADJUSTABLE
112 - 158
75
100
Ordering Information
Item
L40(150)A-V2
L50(150)A
Fiber adapters
www.ophiropt.com
Description
Large aperture power/energy meter, 35W continuous, 150W intermittent
Large aperture power/energy meter, 50 W continuous, 150W intermittent
See page 55 for ordering information
38
Ophir P/N
1Z02626
1Z02633
F150A
Recommended Use: High power surgical lasers, broadband
Special Features: Fan cooled
F150A
Broadband, 0.19 - 20µm
Ø17.5mm
150W/30W
15KW/cm2
3mW
±3%
1.2s
±1%
100J/30J/3J
20mJ
Fan
115
118
89
45
Ø50
Heads
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Energy Threshold
Cooling:
Laser Power
& Energy
CW & Average Power Measurements 60mW-150W 20mJ-100J
44.5
13
89
ADJUSTABLE
106-152
100
Displays
75
FL250A
CW & Average Power Measurements 200mW-250W 50mJ-200J
Recommended Use: Surgical lasers, large beams
Special Features: Fan cooled, large aperture
Broadband, 0.19 - 20µm
Ø50mm
250W/30W
250W
10KW/cm2
10mW
±3%
2.5s
±1%
300J/30J/3J
50mJ
Fan
115
118
89
45
Ø50
44.5
13
89
ADJUSTABLE
106-152
100
75
Integrated Systems
Absorber:
Aperture:
Digital Power Scales:
Maximum Power:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Energy Threshold
Cooling:
Beam Profile
Wavelength
FL250A
www.ophiropt.com
Description
Fan cooled 150W power/energy meter
Fan cooled 150W power/energy meter with electrical calibration option
Large aperture fan cooled 250 Watt power/energy meter
See page 55 for ordering information
39
Ophir P/N
1Z02163
1Z02164
1Z02605
OEM Products
Ordering Information
Item
F150A
F150A-CAL
FL250A-V1
Fiber adapters
FL300A
CW & Average Power Measurements 200mW-300W 50mJ-300J
Recommended Use: General purpose to 300W
Special Features: Fan cooled
FL300A
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0 - 95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Surface Uniformaty:
Cooling:
Broadband, 0.19-20µm
Ø50mm
300W/30W
8KW/cm2
10mW
±3%
2.5s
±1%
300J/30J/3J
50mJ
±2% over central 70% of surface
Fan
115
118
89
45
Ø50
44.5
13
89
ADJUSTABLE
106-152
100
75
FL300A-LP
CW & Average Power Measurements 200mW-300W 50mJ-300J
Recommended Use: High power and long pulse YAG and CO2 lasers
Special Features: High power density and high pulse energy density
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0 - 95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Maximum Energy Density:
Surface Uniformaty:
Cooling:
LP 0.4-1.5, 10.6µm
Ø50mm
300W/30W
10KW/cm2
10mW
±3%
2.5s
±1%
300J/30J/3J
50mJ
0.1J/cm2
10ns
20J/cm2
0.5ms
120J/cm2
5ms
±2% over central 70% of surface
Fan
FL300A-LP
115
118
89
45
Ø50
44.5
13
89
ADJUSTABLE
106-152
100
75
Ordering Information
Item
FL300A
FL300A-LP
www.ophiropt.com
Description
Large aperture fan cooled 300W power/energy meter
Large aperture 300W power/energy meter with damage resistant LP coating
40
Ophir P/N
1Z02627
1Z02635
L250W
Laser Power
& Energy
CW & Single Pulse Measurements 4W-250W 200mJ-200J
Recommended Use: Tight spaces
Special Features: Water cooled, very thin design – 20mm thick
Broadband, 0.19-20µm
Ø50mm
250W / 30W
250W
10KW / cm2
200mW
±3%
2.5s
±2%
200J/ 30J/ 3J
200mJ
Water – 1.0 liter/minute, (minimum)
Water temperature range 18-30oC
Water temperature rate of change <1oC/min.
L250W
CABLE
WATER CONNECTION
6.5
20
10
60
90
15
Heads
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0 - 95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Cooling:
Ø50
6.5
90
1/4-20 BSW
6 DEEP
1/8-27 NPT THREAD
FOR WATER CONNECTION
Displays
WATER CONNECTOR
FOR Ø1/4” PLASTIC HOSE
1000W
CW & Average Power Measurements 5W-1000W 300mJ-300J
1000W
35
Ø34
1 / 8” NPT
21.5
THREAD SIZE
Ø100
9
45˚
30˚
ADJUSTABLE
112-158
17.5
1 / 4” BSW
THREAD FOR ROD
QUICK CONNECT FITTING
FOR Ø3 / 8” PLASTIC HOSE
100
75
Ordering Information
Item
L250W
1000W-V1
www.ophiropt.com
Description
Thin profile, water cooled 250W power/energy meter
1000 Watt power/energy meter
41
Integrated Systems
Broadband, 0.19 - 20µm
Ø34mm
1000W / 200W
6KW / cm2
0.2W
±3%
2.5s
±2%
300J / 30J
300mJ
±2.5%
Water – 1.8 liter / minute (minimum)
Water temperature range 18-30oC
Water temperature rate of change <1oC/min.
Ophir P/N
1Z02688
1Z02634
OEM Products
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0 - 95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Surface Uniformity:
Cooling:
Beam Profile
Wavelength
Recommended Use: High power CO2, Nd YAG and Diode lasers
Special Features: High power, fast response, compact
L1500W / L1500W-LP
CW & Average Power Measurements 20W-1500W 500mJ-200J
Recommended Use: High power and long pulse YAG and CO2 and Diode lasers
Special Features: High power and energy density, large aperture
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Response Time with Display (0 - 95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Maximum Energy Density
Cooling:
Broadband 0.19-20µm LP 0.19-1.5, 10.6µm
Ø50mm
1500W / 150W
BB-5KW/cm2, LP-6KW/cm2
0.7W
±5%
2.7s
±2%
200J / 20J
500mJ
pulse width
BB
LP
10ns
0.3J/cm2 0.1J/cm2
0.5ms
5J/cm2
20J/cm2
5ms
20J/cm2
120J/cm2
Water – 2.5 liter / minute, (minimum)
Water temperature range 18-30oC
Water temperature rate of change <1˚C/min.
L1500W/L1500W-LP
40
Ø120
Ø50
1 / 8” NPT
THREAD SIZE
22
15o
6.5
30o
ADJUSTABLE
125-165
QUICK CONNECT FITTING
FOR Ø3 / 8” PLASTIC HOSE
100
75
Ordering Information
Item
L1500W
L1500W-LP
www.ophiropt.com
Description
Water cooled 1500W power/energy meter
Large aperture 1500W power/energy meter with damage resistant LP coating
42
Ophir P/N
1Z02660
1Z02082
5000W / 5000W-LP
Laser Power
& Energy
CW Power 100W-5000W
Recommended Use: High power and long pulse YAG, CO2 and Diode lasers
Special Features: High power density and large pulse energy density.
Diode LP type – Highest damage threshold
5000W/5000W-LP
Absorber:
Broadband
0.19-20µma
LP
0.19-1.5, 10.6µma
Aperture:
Ø50mm
Digital Power Scales:
5000W / 500W
Maximum Ave. Power Density:
BB - 3KW / cm2
LP - 4KW / cm2
Power Noise Level:
1W
Power Accuracy:
±5%
Response Time with Display (0 - 95%): 3s
Linearity with Power:
±2%
Energy Scales:
N.A.
Cooling:
Water – 4.5 liter / minute, (minimum)
Water temperature range 18-30oC
Water temperature rate of change <1oC/min.
52
Ø146
1 / 8” NPT
THREAD SIZE
Ø50
30o
30o
30o
ADJUSTABLE
135-180
34.5
6.5
QUICK CONNECT FITTING
FOR Ø3/8” PLASTIC HOSE
100
75
Displays
Note a: Head is calibrated for YAG, CO2 and Diode lasers.
Heads
14.5
10K-W
CW & Pulsed Measurements 200W-10,000W
Recommended Use: Very High Powers and power densities
Special Features: Withstands up to 10KW/cm2 at 10,000W
10K-W
71
Ø146
Ø45
7
30˚
CABLE
55.5
18.5
30˚
30˚
ADJUSTABLE
135-180
75
1/8” NPT
THREAD SIZE
QUICK CONNECT FITTING
FOR Ø3/8” PLASTIC HOSE
Integrated Systems
Broadband type for 0.8-1.1µm and 10.6µm. Patent
pending method for beam intensity reduction
Aperture:
Ø45mm
Digital Power Scales:
10KW / 1KW
Beam
Maximum Ave. Power
Max Power Max Energy Density
Diameter Density
1ms pulse w 3ms p.w. 10ms p.w.
and energy Density:
<15mm
60J/cm2 150J/cm2
10KW/cm2 30J/cm2
15-20mm 7KW/cm2
20J/cm2
40J/cm2 100J/cm2
20-40mm 5KW/cm2
15J/cm2
30J/cm2 70J/cm2
40-45mm 4KW/cm2
12J/cm2
25J/cm2 60J/cm2
2W
Power Noise Level:
±5%
Power Accuracy:
Response Timewith Display (0 - 95%): <3s
±2%
Linearity with Power:
N.A.
Energy Scales:
±2%
Beam Size Dependence:
±5 degrees
Maximum incidence Angle:
Water – 9 liter / minute, (minimum)
Cooling:
Water temperature range 18-25oC
Water temperature rate of change <1oC/min.
Beam Profile
Wavelength
Absorber:
100
Item
5000W
5000W-LP
10K-W-V1
Description
Water cooled 5000W power meter
5000W power/energy meter with damage resistant LP coating
Water cooled 10,000W power meter
www.ophiropt.com
43
Ophir P/N
1Z02119
1Z02255
1Z02645
OEM Products
Ordering Information
Comet Laser Power Probes
CW power: Comet 10K, 10K-HD – 200W to 10KW, Comet 1K – 20W to 1KW
Ophir now offers the simple to use, economical but also highly accurate Comet laser power probe. It operates by measuring the heat rise
from a 10 second exposure to a laser beam. The Comet has a sophisticated algorithm to take into account the heat loss due to the Comet
temperature so that it gives accurate readings even if it is hot before the measurement. This allows you to take several measurements before
cooling the probe with water. Along with the Comet 10K for industrial lasers which measures mainly from 1KW to 10KW, Ophir offers a smaller
Comet 1K for measuring from ~20W up to 1KW.
Recommended Use: Comet 10K, 10K-HD – Industrial lasers, Comet 1K – quick power check of low-med power lasers
Special Features: Accurate, simple to use and inexpensive
Ø55
SMART KEYS
Ø50
MAX. BEAM DIAMETER
SMART KEYS
MENU
43
39
25
Ø110
"ON/READY/OFF" BUTTON
BUTTON “ON/READY/OFF”
43
95
LASER ABSORBER
Model
Power measurement range:
Spectral range:
Absolute calibation accuracy
at calibrated wavelengths:
Repeatability:
Linearity with power:
Number of readings before probe
must be cooled (for 25degC
starting temp.)
Comet 10K
200W to 10,000W
CO2, YAG & diode
±5%
295
12.5
25
SMART KEYS
39
Ø90
350
39
14
26.5
145
100
145
345
12.5
50
87
MENU
ON/READY/OFF
100
53
ON/READY/OFF
145
Comet 10K HD
200W to 10,000W
CO2
±5%
43
Ø100
LASER ABSORBER
BUTTON “ON/READY/OFF”
Comet 1K
20W to 1000W
0.2 - 20µm
±5%
±1% for same initial temperature ±1% for same initial temperature
±1% for same initial temperature
±2% ±1W from 20W to 1KW
±2% from 1KW to 10KW
±2% from 1KW to 10KW
4
4
100W
4
1KW
1KW
3
3
300W
3
3KW
3KW
2
2
400W
2
4KW
4KW
1
1
1KW
1
10KW
10KW
Dimensions:
Absorber: Ø50mm diameter x 25mm
Absorber: Ø100mm diameter x 50mm Absorber: Ø110mm diameter x 87mm
thick
thick
thick. Max beam size 55mm
Length: 340mm
Length: 295mm
Length: 340mm
Standard Model
Damage Threshold for power: a
1K Model
Power
Beam diameter <40mm Beam diameter >40mm Power
3500W/cm2
7KW/cm2
10KW/cm2
1KW
100W
10KW/cm2
2800W/cm2
6KW/cm2
8KW/cm2
2KW
200W
10KW/cm2
2500W/cm2
5KW/cm2
6KW/cm2
3KW
300W
8KW/cm2
1500W/cm2
3KW/cm2
5KW/cm2
5KW
500W
6KW/cm2
1000W/cm2
2KW/cm2
4KW/cm2
10KW
1KW
4KW/cm2
Damage threshold for <100ns
0.3J/cm2
0.3J/cm2
1J/cm2
energy/pulse width:
1J/cm2
1J/cm2
10µs
3J/cm2
10J/cm2
10J/cm2
1ms
30J/cm2
50J/cm2
50J/cm2
10ms
150J/cm2
Time to reading:
Initial reading approximately 20s after exposure,
Initial reading approximately 10s after
final reading 40s after exposure
exposure, final reading 20s after exposure
Weight:
1.2Kg
300g
Temperature compensation:
Temperature compensated to give accurate readings independent of starting probe temperature
Maximum permitted probe temperature: 70degC before measurement, 140degC after measurement
Swivel mount:
Handle swivels ±90 degrees vis a vis absorber for ease of use.
Display:
2x8 character LCD. Character height 5mm
Operation models:
AUTO: Automatic measurement with laser set to 10s timed exposure. Unit senses temperature rise and measures automatically.
MANUAL: User places probe in front of beam for 10s. Unit beeps to indicate start and stop measurement points.
History:
Stores last three readings
Calibration:
Can be recalibrated by user
Battery:
2 x AA. Lifetime in normal use approximately 1 year
Electromagnetic compatibility:
CE approved
Note a: For centered top hat beam
Ordering Information
Item
Comet 10K-V1
Comet 10K HD
Comet 1K
Description
Hand held power probe for 200 - 10,000W
Hand held power probe for 200 - 10,000W with beam spreading cone in center for high damage threshold
Hand held power probe for 20 - 1000W
www.ophiropt.com
44
Ophir P/N
1Z02705
1Z02703
1Z02702
Approximate Spectral Absorption and Damage Threshold of Ophir Thermal Surface Absorbers
100
BB Thermal
Laser Power
& Energy
90
ABSORTIVITY IN %
80
70
60
50
40
30
20
10
0.1
1
10
20
30
10
20
30
Heads
0
WAVELENGTH IN µm
100
LP
90
70
60
50
40
Displays
ABSORTIVITY IN %
80
30
20
10
0
0.1
1
WAVELENGTH IN µm
10
1
BB 0.3
LP 0.1
CW
W / cm
LP
2
0.01
10-10 10-9
1 nsec
10-8
10-7
10-6
10-5
1 µsec
10-4
10-3
10-2
1 msec
10-1
1
1 sec
PULSE WIDTH IN SECONDS
Note a:
With BB (broadband) coating, slight cosmetic damage that does not affect calibration may occur at 3 - 10KW/cm2
Maximum power and energy density ratings of thermal BB and LP coatings vary with power level and beam diameter. In general,
highest values of shaded area in curve are for powers below 300W and beam diameters below 1mm.
For larger beam diameters the maximum power and energy density ratings approach the lower values in the shaded area.
For model 30A, the maximum energy density even for long pulses is limited to 2J/cm2. It is recommended to use model 30(150)A-HE/HE1
for long pulse length high energy single shot lasers.
Rating is for single pulses and is considerably less for repetitive pulses.
www.ophiropt.com
45
Integrated Systems
100
OEM Products
1K
(CW) POWER DENSITY W / CM2
ENERGY DENSITY IN J / CM2
LP > 1500W a
BB thermal > 1500W a
Beam Profile
Wavelength
BB Thermal < 300W a
Pulsed Laser Damage Threshold
10K
Thermal Volume Absorbers for Short and Long Pulse Lasers
3A-P
CW & Pulsed Measurements 60 W-3W 20 J-2J
Recommended Use: Very low power and energy pulsed lasers
Special Features: Very sensitive, low noise, spectrally flat
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Thermal drift (30 min.)
Power Accuracy:
Maximum Energy Density J/cm2 b
Response Time with Display (0 - 95%):
Linearity with Power:
Linearity with Energy:
Energy Threshold:
Energy Scales:
Cooling:
Dimensions:
P type, 0.15 - 6µm
Ø12mm
3W / 300mW/30mW/3mW/300µW
50W/cm2
4µW
5 - 30µW a
±3%
single shot
10-30Hz
10
1
2.5s
±1.5%
±2% ±4µJ
20µJ
2J / 200mJ / 20mJ / 2mJ / 200µJ
Convection
See drawing
3A-P
48
30
Ø12
Ø70
19
Ø23
97-143
ADJUSTABLE
Notes: a. Depending on typical room airflow and temperature variations
b. For shorter wavelengths derate to values shown:
Wavelengths
Derate to value
355nm
40%
266nm
10%
193nm
10%
30º
75
100
12A-P
CW & Pulsed Measurements 200 W-12W 200 J-30J
Recommended Use: High energy pulsed lasers, dermatology and scientific applications
Special Features: High sensitivity, spectrally flat, very high dynamic range
12A-P
Absorber:
Aperture:
Digital power scales:
Maximum average power density:
Power noise level:
Thermal drift (30 min.)
Power accuracy:
Maximum energy density J/cm2
Response time with display (0 - 95%):
Linearity with power:
Energy scales:
Energy threshold:
Linearity with Energy:
Dimensions:
Cooling:
P type, 0.19 - 6µm
Ø16mm
12W / 2W/200mW/20mW/2mW
50W/cm2
80µW
40 - 150µW a
±3%
single shot
10-30Hz
10
1
3.5s
±1.5%
30J / 3J / 300mJ / 30mJ / 3mJ b
1mJ
±1.5% ±50µJ
See drawing
Convection
Notes: a. Depending on typical room airflow and temperature variations.
b. For the 30mJ energy scale measurements it is recommended to use the screw on barrel
supplied with the head to protect from direct air flow
38
Ø80
7
Ø16
45˚
ADJUSTABLE
19 102-134
44
ADJUSTABLE
107 - 150
43
ø85
100
75
75
100
Ordering Information
Item
3A-P-V1
12A-P
Fiber adapters
www.ophiropt.com
Description
3W power/energy meter for low energy pulsed lasers
12W power/energy meter for pulsed lasers
See page 55 for ordering information
46
Ophir P/N
1Z02622
1Z02624
30A-P
Laser Power
& Energy
CW & Single Pulse Measurements 60mW-30W 30mJ-30J
Recommended Use: Single pulsed Q-switched lasers, low average power pulsed lasers
Special Features: Broad spectral range
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Maximum Energy Density J/cm2 a:
P type, 0.19 - 6µm
Ø17mm
30W / 3W
50W / cm2
3mW
±3%
single shot
10
Response Time with Display (0 - 95%): 2.5s
Linearity with Power:
±1%
Energy Scales:
30J / 3J
Energy Threshold:
30mJ
Cooling:
Convection
10-30Hz
1
43
Ø85
Heads
Ø17
ADJUSTABLE
102-134
40%
10%
10%
100
30A-P-DIF
75
Displays
Note a: For shorter wavelengths derate to values shown:
Wavelength:
355nm
Derate to value:
266nm
193nm
30A-P
30A-P-DIF
CW & Pulsed Measurements 60mW-30W 30mJ-30J
P type, 0.19 - 6µm a
Ø16mm
30W / 3W
30 Watts continuous
500W / cm2
3mW
Diffuser IN
Diffuser OUT
3J / cm2
1J / cm2
2J / cm2
1J / cm2
±5%
2.5s typ
±1%
30J / 3J
30mJ
Convection
1J / cm2
0.4J / cm2
±3%
Diffuser IN
Diffuser OUT
77
43
Ø17
Ø85
Ø25
REMOVABLE DIFFUSER
ASSEMBLY
ADJUSTABLE
102-134
Note a: With diffuser in, head is only calibrated at wavelengths listed.
100
75
Integrated Systems
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power:
Maximum Average Power Density:
Power Noise Level:
Maximum Energy Density J/cm2 for
10ns pulses and 10-30Hz:
1064nm
532nm
355nm
Power Accuracy:
Response Time with Display (0 - 95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Cooling:
Beam Profile
Wavelength
Recommended Use: Concentrated beam Q-switched lasers
Special Features: Diffuser to spread out concentrated pulsed laser beams
Item
30A-P
30A-P-DIF
P absorber
Fiber adapters
Description
30W power/energy meter for pulsed lasers
30W power/energy meter for pulsed lasers with diffuser for concentrated beams up to 500W/cm2
Replacement absorber for user installation for 30A-P-V1 heads
See page 55 for ordering information
www.ophiropt.com
47
Ophir P/N
1Z02613
1Z02616
19509
OEM Products
Ordering Information
30A-N
CW & Single Pulse Measurements 60mW-30W 30mJ-200J
Recommended Use: Concentrated beam YAG lasers
Special Features: Very high damage threshold for power density
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy:
Maximum Energy Density J/cm2:
N type, 1064nm, 532nm
Ø17.5mm
30W / 3W
5KW / cm2
3mW
±3%
30A-N
44
43
Ø85
Ø17.5
1J/cm2
1µS:
0.5ms:
20J/cm2
>5ms:
>100J/cm2
Response Time with Display (0 - 95%): 2s typ
±1%
Linearity with Power:
200J / 30J / 3J
Energy Scales:
30mJ
Energy Threshold:
Convection
Cooling:
ADJUSTABLE
102-134
100
75
30(150)A-HE/HE1
CW & Single Pulse Measurements 50mW-150Wa 50mJ-200J
Recommended Use: High energy and average power pulsed lasers.
HE: YAG + harmonics, Holmium, Erbium / HE1: Ruby, Alexandrite, Erbium
Special Features: Very high damage threshold, high average power.
HE type, 0.19-3µm except 625-900nm
HE1 type: 0.19-0.76µm, 2.9µm
Ø17mm
Aperture:
150W / 30W/3W a
Digital Power Scales:
Maximum Average Power:
30 Watts continuous, 150 Watts intermittent
Maximum AveragePower Density:
500W / cm2
3mW
Power Noise Level:
±3%
Power Accuracy:
single shot
10-30Hz
Maximum Energy Density J/cm2 b
10ns
5
2
0.5ms
100
25
5ms
250
60
Response Time with Display (0 - 95%): 3.8s, typ
Linearity with Power:
±1%
Energy Scales:
200J/30J/3J
Energy Threshold:
50mJ
Cooling:
Convection
Absorber:
Notes: a.
b.
Max power is 30W continuous, 150W intermittent
For shorter wavelengths derate to values shown: Wavelength Derate to value
355nm
50%
266nm
50%
193nm
10%
30(150)A-HE/HE1
43
Ø85
Ø17
ADJUSTABLE
102-134
100
75
Ordering Information
Item
30A-N
30(150)A-HE
30(150)A-HE106
30(150)A-HE1
30(150)A-HE1-755
Fiber adapters
Description
30W power/energy meter for concentrated or high energy YAG beams
30/150W power/energy meter for wavelength 0.19-625 and 0.9-3µm. Energy calibrated for 0.19-0.6µm and 2.9µm
30(150)A-He with energy calibration for 1.064µm
30/150W power/energy meter for high pulse energies, 0.19-0.76µm. Energy calibrated for 0.694µm (Ruby laser)
30(150)A-HE1 with energy calibrated for 0.755µm (Alexandrite laser)
See page 55 for ordering information
www.ophiropt.com
48
Ophir P/N
1Z02003
1Z02380
1Z02385
1Z02382
1Z02387
30(150)A-HE-DIF
30(150)A-HE-DIF
Laser Power
& Energy
CW & Pulsed Measurements 50mW-150W 50mJ-30J
Recommended Use: Concentrated beam Q-switched lasers.
Special Features: Diffuser to spread out concentrated pulsed beam
HE type, 0.19-3µm except 625-900nm a
Ø16mm
150W / 30W / 3W
30 Watts continuous, 150 Watts intermittent
500W / cm2
3mW
Diffuser IN
5J/cm2
4J/cm2
1.5J/cm2
±5%
3.8s typ
±1%
30J / 3J
50mJ
Convection
Diffuser IN
Diffuser OUT
2J / cm2
2J / cm2
1J cm2
±3%
Diffuser OUT
77
43
Ø17
Ø85
Ø25
Heads
Absorber:
Aperture:
Digital Power Scales:
Maximum AveragePower:
Maximum AveragePower Density:
Power Noise Level:
Maximum Energy Density J/cm2 for
10ns pulses and 10-30Hz:
1064nm
532nm
355nm
Power Accuracy:
Response Time with Display (0 - 95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Cooling:
REMOVABLE DIFFUSER
ASSEMBLY
ADJUSTABLE
102-134
Note a: With diffuser in, head is only calibrated for wavelengths listed
75
Displays
100
30(150)A-SV
CW & Pulsed Measurements 50mW-150W 50mJ-300J
SV type, 0.19 - 12µm
Ø17mm
150W / 30W / 3W
30 Watts continuous, 150 Watts intermittent
>100KW/cm2
3mW
>2J/cm2
40J/cm2
>100J/cm2
±3%
1.5s typ
±1%
300J / 30J / 3J
50mJ
Convection
Beam Profile
Wavelength
Absorber:
Aperture:
Digital Power Scales:
Maximum AveragePower:
Maximum AveragePower Density:
Power Noise Level:
Maximum Energy Density J/cm2
10ns
0.5ms
2ms
Power Accuracy:
Response Time with Display (0 - 95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Cooling:
30(150)A-SV
43
Ø85
Ø17
Integrated Systems
Recommended Use: Both high power density and energy density
Special Features: Extremely high damage threshold for average
power and single pulses
ADJUSTABLE
102-134
100
75
Item
30(150)A-HE-DIF
30(150)A-SV
Fiber adapters
www.ophiropt.com
Description
30(150)A-HE with diffuser for concentrated beams up to 500W/cm2
30/150W power/energy meter with extremely high damage threshold
See page 55 for ordering information
49
Ophir P/N
1Z02354
1Z02625
OEM Products
Ordering Information
F100A-HE/HE1
CW & Single Pulse Measurements 120mW-100W 50mJ-200J
Recommended Use: High energy and average power pulsed lasers.
HE: YAG + harmonics, Holmium, Erbium
HE1: Ruby, Alexandrite, Erbium
Special Features: Very high damage threshold, high average power.
Absorber:
HE type: 0.19-3µm except 625-900nm
HE1 type: 0.19-0.76µm, 2.9µm
Aperture:
Ø25mm
Digital Power Scales:
100W / 30W
Maximum AveragePower Density:
500W / cm2
Power Noise Level:
6mW
Power Accuracy:
±3%
Maximum Energy Density J/cm2 a
single shot
10-30Hz
10ns
5
2
0.5ms
100
25
5ms
250
60
Response Timewith Display (0 - 95%): 3.8s, typ
Linearity with Power:
±1%
Energy Scales:
200J / 30J / 3J
Energy Threshold:
50mJ
Cooling:
Fan
Note a: For shorter wavelengths derate to values shown:
Wavelength Derate to value
355nm
50%
266nm
50%
193nm
10%
F100A-HE/HE1
115
115
89
45
12.5
89
Ø24
ADJUSTABLE
106-152
100
75
Ordering Information
Item
F100A-HE
F100A-HE-106
F100A-HE1
www.ophiropt.com
Description
As 30(150)A-HE (page 48) for 100W average power
As 30(150)A-HE-106 (page 48) for 100W average power
As 30(150)A-HE1 (page 48) for 100W average power
50
Ophir P/N
1Z02430
1Z02432
1Z02431
Approximate Spectral Absorption of Thermal Volume Absorbers
100
P
SV
Laser Power
& Energy
HE1
90
LP
80
SV 10.6µm
HE
ABSORTIVITY IN %
70
60
50
40
30
Heads
20
10
0
0.1
1
10
20
30
WAVELENGTH IN µm
Displays
Pulse Energy Rating for Ophir Thermal Volume Absorbers
Pulsed Laser Damage Threshold
1K
100
P
10
2
1
0.1
CW
W / cm
LP
2
Beam Profile
Wavelength
HE / HE1
(CW) POWER DENSITY W / CM2
ENERGY DENSITY IN J / CM2
10K
10-8
10-7
10-6
10-5
1 µsec
10-4
10-3
10-2
1 msec
PULSE WIDTH IN SECONDS
Note:
Power and energy density is derated as follows:
Absorber
193nm
248-266nm
355nm
P type
derate to 10%
derate to 10%
derate to 40%
HE/HE1 type
derate to 10%
derate to 50%
derate to 50%
Rating is for single pulses and is considerably less for repetitive pulses
www.ophiropt.com
51
10-1
1
1 sec
OEM Products
10-10 10-9
1 nsec
Integrated Systems
0.01
Thermal Excimer Heads
L30A-EX
CW & Single Pulse Measurements 80mW-30W 20mJ-30J
Recommended Use: Medium aperture excimer lasers, Cu vapor lasers, TEA lasers
Special Features: Sensitive, spectrally flat in UV, compact
L30A-EX
Absorber:
Aperture:
Digital Power Scales:
Maximum Average
Power Density:
Power Noise Level:
Power Accuracy
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Cooling:
EX absorber, 0.15-0.4µm, 10.6µm
Ø29mm
30W / 3W
44
43
2KW/cm2
4mW
±3%
1.5s
±1%
30J / 3J / 300mJ
20mJ
Convection
Ø29
Ø85
ADJUSTABLE
102-134
100
75
L40(150)A-EX
CW & Single Pulse Measurements 200mW-150Wa 80mJ-200J
Recommended Use: Large aperture, low power excimer lasers, Cu vapor lasers, TEA lasers
Special Features: Sensitive, spectrally flat in UV, low profile
Absorber:
Aperture:
Digital Power Scales:
Maximum Average Power Density:
Power Noise Level:
Power Accuracy
Response Time with Display (0-95%):
Linearity with Power:
Energy Scales:
Energy Threshold:
Cooling:
L40(150)A-EX
EX absorber, 0.15-0.4µm, 10.6µm
Ø50mm
150W / 20W a
2KW/cm2
15mW
±3%
2.5s
±1%
200J / 30J / 3J
80mJ
Convection
90
33
100
75
Ø50
ADJUSTABLE
107-152
Note a: Max power is 35W continuous, 150W intermittent.
Ordering Information
Item
L30A-EX
L40(150)A-EX-V1
www.ophiropt.com
Description
Large aperture 30W excimer power/energy meter
Large aperture 35/150W excimer power/energy meter
52
Ophir P/N
1Z02194
1Z02614
FL250A-EX
Laser Power
& Energy
CW & Single Pulse Measurements 200mW-250W 50mJ-200J
Recommended Use: Large aperture excimer lasers, Cu vapor lasers, long pulse lasers
Special Features: Sensitive, spectrally flat in UV, compact
EX absorber, 0.15-0.4µm, 10.6µm
Ø50mm
250W / 30W
2KW/cm2
10mW
±3%
2.5s
±1%
200J / 30J / 3J
50mJ
Convection
Heads
Absorber:
Aperture:
Digital Power Scales:
Maximum Ave. Power Density:
Power Noise Level:
Power Accuracy:
Response Time withDisplay (0 - 95%):
Linearity with Power:
Energy Scales:
Energy threshold
Cooling:
115
Ø50
Displays
FL250A-EX
118
44.5
89
44.5
12.5
89
75
Integrated Systems
100
Beam Profile
Wavelength
ADJUSTABLE
106 - 152
Ordering Information
Description
Large aperture 250W excimer power/energy meter
Large aperture 250W excimer power/energy meter with electrical calibration option
Ophir P/N
1Z02391
1Z02393
OEM Products
Item
FL250A-EX
FL250A-EX-CAL
www.ophiropt.com
53
Approximate Spectral Absorption of EX Absorbers
100
EX
90
ABSORTIVITY IN %
80
70
60
50
40
30
20
10
0
0.1
1
10
20
30µ
WAVELENGTH IN µm
Pulse Energy Rating for Ophir Surface & Volume Absorbers
Pulsed Laser Damage Threshold
1K
100
(CW) POWER DENSITY W / CM2
ENERGY DENSITY IN J / CM2
10K
10
2
1
0.5
EX
0.1
CW
W / cm
2
0.01
10-10 10-9
1 nsec
10-8
10-7
10-6
10-5
1 µsec
10-4
10-3
10-2
1 msec
PULSE WIDTH IN SECONDS
www.ophiropt.com
54
10-1
1
1 sec
Fiberoptic Adapters and Accessories for Thermal Heads
Ø32
Ø32
Ø32
13
7
2
13
7
2
13
M20x1
M20x1
M20x1
Ø25
Ø25
Ø25
3A-P/10A-SMA
3A-P/10A-ST
3A-P/10A-FC
1Z02216
1Z02214
1Z02215
48
118
F.O. ADAPTER
MOUNTING BRACKET
F.O. ADAPTER
MOUNTING BRACKET
Ø25
2
89
6
F.O. ADAPTER
F.O. ADAPTER
M20x1
75
75
30A/L30A
FL250A
with F.O. input
with F.O. input
SMA F.O. adapter
for 30A/L30A/F100A
and FL250A
1G01236
55
Integrated Systems
45
43
www.ophiropt.com
Beam Profile
Wavelength
2
OEM Products
7
Displays
Heads
Laser Power
& Energy
The heads can work either with or without the adapters attached
Ordering Information for Fiber Adapters for Thermal and Photodiode Heads
Head Series
Fiber adapter
mounting bracket
(1 bracket will fit
all fiber adapters)
SC Fiber
adapter
LC Fiber
adapter
ST Fiber
adapter
FC Fiber
adapter
SMA Fiber
adapter
PD300
PD300-IRG-V1
3A-IS-V1
F100A-IS
3A
3A-P-V1
10A-V1
12A / 12A-P
30A-V1
30A-P
L30A-V1
L50A
30(150)A-HL
30(150)A-SV
30(150)A-HE / HE1
30(150)A-V1
L40(150)A-V2 / L50(150)A
FL250A-V1
FL300A / FL300A-LP
not needed
not needed
1Z08213
1Z08213
not needed
not needed
not needed
not needed
1Z08211
1Z08230
1Z08210
1Z08210
1Z08211
1Z08230
1Z08230
1Z08211
1Z08238 a
1Z08212
1Z08212
1Z08221
not available
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
1Z08227
not available
1Z08215
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z08228
1Z02210
not available
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z08226
1Z02213
1Z08216
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z08229
1Z02212
1Z08222
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
1G01236
Note a: The fiber mounting bracket for these heads is a triple adapter for mounting up to three different fibers looking at same head
SH to BNC Adapter
Ordering Information
Item
SH to BNC Adapter
www.ophiropt.com
Description
Allows connection of smart head to voltage measuring device for measurement of raw
voltage output
56
Ophir P/N
1Z11010