Go to SUP8 1st Rev.
MAINTENANCE
SECTION
MA
MODIFICATION NOTICE:
I
I
GI
EM
LC
EC
Specifications of recommended fluids and lubricants have been revised.
The maintenance schedule for the platinum-tipped spark plugs of TB engine models has been added for
the introduction of the Euro-III exhaust emission control. (For Australia and New Zealand models)
CONTENTS
FE
CL
MT
PERIODIC MAINTENANCE (For Australia and
New Zealand) ..................................................................2
Engine and Emission Control Maintenance
(TB48DE engine) .........................................................2
RECOMMENDED FLUIDS AND LUBRICANTS.............3
Fluids and Lubricants ..................................................3
SAE Viscosity Number ................................................4
AT
TF
PD
FA
RA
BR
ST
RS
BT
HA
EL
SE
IDX
MA-1
PERIODIC MAINTENANCE (For Australia and New Zealand)
The following tables show the normal maintenance schedule. Depending upon weather and atmospheric
conditions, varying road surfaces, individual driving habits and vehicle usage, additional or more frequent
maintenance may be required.
Periodic maintenance beyond the last period shown on the tables requires similar maintenance.
Engine and Emission Control Maintenance
(TB48DE engine)
Abbreviations: I = Inspect and correct or replace as necessary, R = Replace, A = Adjust, C = Clean, E = Check and correct the engine coolant mixture
ratio.
MAINTENANCE OPERATION
MAINTENANCE INTERVAL
Months
Perform at the specified months or milekm x 1,000
age whichever comes first.
(Miles x 1,000)
—
6
12
18
24
30
36
42
48
1
10
20
30
40
50
60
70
80
(0.6)
(6)
(12)
(18)
(24)
(30)
(36)
(42)
(48)
Reference
page
Engine compartment and under vehicle
Torque of manifolds & exhaust tube nuts
Intake & exhaust valve clearance
I
—
See NOTE (1)
—
Drive belts
I
I
—
Engine oil (Use API recommended oil)★
R
R
R
R
R
R
R
R
MA-3
Engine oil filter★*1
R
R
R
R
R
R
R
R
—
R
—
Engine coolant (Use NISSAN Genuine
Engine Coolant or equivalent in its quality)
See NOTE (2)
E
I
MA-3
Fuel filter★
Cooling system
I
R
R
—
Fuel lines
I
I
—
Air cleaner filter (Viscous paper type)★
R
R
—
I
—
Spark plugs (Platinum-tipped type)
I
I
Replace every 100,000 km (60,000 miles)
EVAP vapor lines (With carbon canister)
I
—
NOTE: Maintenance items with “★” should be performed more frequently according to “Maintenance Under Severe Driving
Conditions”.
(1) For models with three way catalyst, periodic maintenance is not required. However, if valve noise increases, check valve
clearance.
(2) Use NISSAN Genuine Engine Coolant, or equivalent in its quality, in order to avoid possible aluminum corrosion within
the engine cooling system caused by the use of non-genuine engine coolant. After first replacement, replace every 40,000
km (24,000 miles) or 24 months.
*1: Use part No. 15208 31U00 or equivalent.
MA-2
RECOMMENDED FLUIDS AND LUBRICANTS
GI
Fluids and Lubricants
Capacity (Approximate)
Liter
Imp measure
Engine oil (Refill)
With oil filter
Without oil filter
TB45E
7.6
TB48DE
6.8
6 qt
TD42, TD42T
10.5
9-1/4 qt
ZD30DDTi
8.2
7-1/4 qt
TB45E
7.3
6-3/8 qt
TB48DE
6.5
5-3/4 qt
TD42, TD42T
9.3
8-1/8 qt
7.7
6-3/4 qt
10.9
11.7
13.2
13.0
15.1
13.0
12.7
13.2
12.9
11.0
12.5
14.4
12.0
12.6
14.1
13.9
16.0
14.1
13.8
14.3
14.0
9-5/8 qt
10-1/4 qt
11-5/8 qt
11-1/2 qt
13-1/4 qt
11-1/2 qt
11-1/8 qt
11-5/8 qt
11-3/8 qt
9-5/8 qt
11 qt
12-5/8 qt
10-5/8 qt
11-1/8 qt
12-3/8 qt
12-1/4 qt
14-1/8 qt
12-3/8 qt
12-1/8 qt
12-5/8 qt
12-3/8 qt
3.5
6-1/8 pt
5.4
9-1/2 pt
2.4
3.0
4.9
4.7
3.7
2.1
4.9
4.7
4-1/4
5-1/4
8-5/8
8-1/4
6-1/2
3-3/4
8-5/8
8-1/4
1.9
1-5/8 qt
ZD30DDTi
Cooling system (with reservoir tank)
With front heater
RHD
TB45E
LHD
RHD
TB48DE
LHD
TD42, TD42T
RHD
ZD30DDTi
LHD
Without front
heater
With rear heater
6-3/4 qt
For Europe
Except for Europe
For Europe
Except for Europe
TB45E
TB48DE
TD42, TD42T
ZD30DDTi
TB45E
LHD
RHD
TB48DE
LHD
TD42
LHD
RHD
ZD30DDTi
LHD
Manual transmission oil
FS5R50B
Differential gear oil (Front)
H233B
Differential gear oil (Rear)
H233B
H233B (with diff. lock)
H260 Pickup
H260 Wagon
H260 (with diff. lock)
H233B (with LSD)
H260 (with LSD) Pickup
H260 (with LSD) Wagon
Transfer fluid
TX12A
Automatic transmission fluid
RE5R05A
RE4R03A
Power steering fluid
Brake and clutch fluid
Multi-purpose grease
Propeller shaft grease
Air conditioning system refrigerant
Air conditioning system lubricants
For Europe
Except for Europe
For Europe
Except for Europe
pt
pt
pt
pt
pt
pt
pt
pt
9-1/8 - 9-3/8
qt
11.8
10-3/8 qt
Refill to the proper oil level
according to the instructions
in the “Maintenance and doit-yourself” section of the
owner’s manual.
—
—
10.4 - 10.7
—
—
—
—
Recommended Fluids/Lubricants
I Gasoline engine:
Genuine NISSAN engine oil
API SE, SF, SG, SH, SJ, SL or SM*1
ILSAC grade GF-1, GF-2, GF-3, GF-4 or SG+*1
I Diesel engine:
Genuine NISSAN engine oil
TD engine (except for Europe):
API CC or CD, CE, CF or CF-4
JASO DH-1*1, *5
ZD engine (except for Europe):
API CE, CF or CF-4
JASO DH-1*1, *5
ZD engine (for Europe):
API CF-4, ACEA B3 or B3/E3, JASO DH-1*1, *5
LC
EC
FE
CL
I For Europe
Genuine NISSAN Anti-freeze Coolant or equivalent in
its quality*6
I Except for Europe
NISSAN Genuine Engine Coolant or equivalent in its
quality*6
MT
AT
TF
PD
API GL-4, Viscosity SAE 75W-90 only
FA
API GL-5*1
Gear Oil Hypoid LSD (Part No.: KLD31-1400203) or
equivalent*2
Genuine NISSAN ATF Matic Fluid D or equivalent*4 or
API GL-4*1
Genuine NISSAN ATF Matic Fluid J*3
Genuine NISSAN ATF Matic Fluid D or equivalent*4
Genuine NISSAN PSF or equivalent*7
I For Europe: DOT 3 or DOT 4 (U.S. FMVSS No.
116)*8
I Except for Europe: DOT 3 (U.S. FMVSS No. 116)
NLGI No. 2 (Lithium soap base)
NLGI No. 2 (Molybdenum disulphide lithium soap
base)
HFC-134a (R-134a)
NISSAN A/C System Oil Type S or equivalent
*1: For further details, see “SAE viscosity number”.
*2: API GL-5, SAE 140 and 10% volume of LSD Friction Modifier (Part No.: 38469-C6000) is an equivalent.
*3: Using automatic transmission fluid other than Genuine NISSAN ATF Matic Fluid J will cause deterioration in driveability and automatic transmission durability, and may damage the automatic transmission, which is not covered by the warranty.
*4: For more information regarding suitable fluids, contact a NISSAN dealer for correct brands of DEXRONTMIII/MERCONTM Automatic Transmission Fluid.
*5: Never use API CG-4.
*6: Use NISSAN Genuine Engine Coolant or equivalent in its quality, in order to avoid possible aluminum corrosion within the engine cooling system caused
by the use of non-genuine engine coolant.
Note that any repairs for the incidents within the engine cooling system while using non-genuine engine coolant may not be covered by the warranty even if such incidents occurred during the warranty period.
*7: DEXRONTMIII type ATF can be used.
*8: Never mix DOT 3 & DOT 4.
MA-3
EM
RA
BR
ST
RS
BT
HA
EL
SE
IDX
RECOMMENDED FLUIDS AND LUBRICANTS
SAE Viscosity Number
I
5W-30 is preferable. If 5W-30 is not available, select the
viscosity from the chart, that is suitable for the outside
temperature range.
I
5W-30 is preferable. If 5W-30 is not available, select the
viscosity from the chart, that is suitable for the outside
temperature range.
SMA203D
SMA204D
MA-4