mountaineering
advertisement
mountaineering Nature has long been the mother of invention in the Stubai Valley. For centuries the water flowing from the glaciers in the Stubai Alps has powered the hammers in our foundries. Today, those same amazing natural forces still provide our power as well as our inspiration. Our team of expert climbers, guides and engineers are in constant communication, to share new ideas from mountain tours and to discuss improvements to our existing ranges. Before we put any product on the market, our first task is to overcome all the emerging technical challenges. Any new equipment is then subjected to a thorough programme of rigorous testing. Only then is our equipment good enough for you. Your satisfaction and opinion are both extremely important to us. You are a vital part of our chain, and we welcome any ideas and feedback that you might have about our products. With best wishes for continued safe, enjoyable and rewarding adventures in the extraordinary world of mountains! Yours STUBAI BERGSPORT Content 4 Quickdraws 5-7 Karabiners 8 Via ferrata and helmets 9 Harnesses 10 Climbing accessories 11 Pitons 12-15 Crampons and accessories 16-17 Ice axes 18 Ice tools 19 Ice screws and accessories 20-21 Tour products 22-23 Steel karabiners and Skysports www.stubai-bergsport.com The Top of The Range quickdraw from our state-of-the-art foundry. The karabiners are ergonomically designed for easy handling and hassle-free clipping, and guarantee smooth rope running. The Supreme also excels with its low weight and very high breaking strength – even with the gate open. Supplied with Dyneema slings in 110, 160 and 210 mm. 25 kN 10 kN 11 kN Weight 85 g (for 110 mm Dyneema) Art. 97950. Supreme Quickdraws Supreme Set Ice Clip Set The Ice Clip quickdraw combines extreme light weight with high strength. The wire gate prevents potential icing in freezing wet conditions. Available with standard or Dyneema slings in 110, 160 and 210 mm. 30 kN 8 kN 10 kN Weight 92 g (for 110 mm Dyneema) Art. 97902. Standard Art. 97903. Dyneema Rock Clip Set Reliable and rigorously-tested quickdraw with great handling – especially when unclipping. The Rock Clip is available with standard or Dyneema slings in 110, 160 and 210 mm. 25 kN 8 kN 10 kN Weight 100 g (for 110 mm Dyneema) Art. 97930. Standard Art. 97961. Dyneema Ice-Rock Clip Set This set combines the advantages of the ICE CLIP and the ROCK CLIP. Available with standard or Dyneema slings in 110, 160 and 210 mm. For strength look at Ice Clip and Rock Clip. Weight 96 g (for 110 mm Dyneema) Art. 97991. Standard Art. 97981. Dyneema Quickdraws are an important part of the safety-chain in any kind of climb. Our range caters for all your demands, with its selection of different shapes of karabiners, gates and slings – whether for rock climbing, ice climbing or mountaineering. For the best possible protection, all our karabiners have anodized coatings. Karabiners Supreme 25 kN 10 kN Ice Clip 11 kN 30 kN Rock Clip 8 kN 10 kN 25 kN 8 kN 10 kN Weight 38 g Weight 42 g Weight 46 g 27 mm Art. 976000 with straight gate 26 mm Art. 975010 with straight gate 20 mm Art. 974011 with straight gate 29 mm Art. 976500 with bent gate 28 mm Art. 975510 with bent gate 22 mm Art. 974511 with bent gate Karabiners HMS Pro Easylock The HMS-Karabiner with screw gate remains the most popular safety device. The brass screw over the precisely engineered thread guarantees reliability and easy handling. The eye-catching red anodized finish makes it especially useful as a central karabiner, and makes it last longer. With its easylock system clipping in and out is easier than ever! 24 kN 11 kN 8 kN 22 mm Weight 95 g Art. 977781 HMS Pro Twistlock The Twistlock system is an auto-locking gate which opens with a simple 90 degree twist. 24 kN 11 kN 8 kN 23 mm HMS Weight 109 g Art. 977731 HMS Pro Push & Twist The new Push & Twist system provides an extra level of safety. The karabiner can only be opened with a 90 degree twist if the barrel has been pushed up. 24 kN 11 kN 8 kN 21 mm Weight 113 g Art. 977799 HMS 3D The HMS 3D’s special shape prevents a running rope from touching the rock-face, regardless of the position of the karabiner. 22 kN Weight 95 g Art. 977761 8 kN 6 kN 23 mm Ypsilon 3600 The Ypsilon 3600 with screwgate is the strongest aluminium karabiner in the STUBAI range. It is designed for use wherever you need extra strength. 36 kN 10 kN 14 kN 16 mm Ypsilon Weight 94 g Art. 973011 Alpha Pro The Alpha Pro with screwgate is a versatile karabiner with high strength and wide gate clearance. 30 kN 10 kN 12 kN 23 mm Weight 95 g Art. 977511 Alpha Pro Twistlock Similar to the Alpha Pro with screwgate, but opens with a simple 90 degree twist. Alpha 30 kN 10 kN 12 kN 24 mm Weight 109 g Art. 977531 STUBAI offers a specially designed range of karabiners with various shapes and locking systems. Our use of finest grade materials and the most modern technology guarantees the highest possible quality of our products. Alpha Pro Push & Twist The Push & Twist system is for extra security. The karabiner can only be opened with a twist if the barrel has been pushed up. 30 kN 10 kN 12 kN 22 mm Weight 113 g Art. 977599 Ferrata Connect Modern, easy to use karabiner for use on via ferrata. The palm clip system of the Ferrata Connect can be easily engaged even by children. An extra large gate clearance is achieved by setting the gate down in the corner of the karabiner. 32 kN 14 kN 26 mm Ferrata Weight 110 g Art. 977552 Via ferrata Ferrata Connect Basic Same spec as the FERRATA CONNECT FLEX, but with one velcro strap to secure the braking rope and without the elastic band. Weight 495 g Art. 988460 Ferrata Connect Flex Y-form via ferrata set with Ferrata Connect karabiners. The brake rope is held by a double velcro strap to stop it from getting in the way when climbing and walking. The sling’s fastening strap attaches directly to your harness with a simple anchor knot. Elastic bands ‘swallow’ unused rope and prevent annoying tangling. The built-in brake softens any falls and reduces stress on both the body and the equipment. Weight 510 g Art. 988450 Ferrata Helmets Fuse Light A light but robust moulded helmet which combines comfort with functionality. Size can be changed in seconds with the adjuster wheel, even with one hand. It has great ventilation, and padding both inside of the helmet and on the adjustable chin-strap. The ergonomic neck-line completes the Fuse Light’s features, and its shape means that there is no hindrance to vision – even when looking up. Also equipped with a handy headlamp holder. Size 54-62 cm (XS-XL) Weight 345 g Art. 900005 white Art. 900006 red Flow Plus An extra-light helmet thanks to the use of Polycarbonate and In-Mould technology. Its ergonomic side and neck cut means you could almost forget you are wearing it. The Flow Plus has an adjustable chin-strap, and a simple adjuster wheel for a perfect fit. With good ventilation and a headlamp holder, it is equally useful in the heat of the day or the dark of the night. Size 54-62 cm (XS-XL) Weight 245 g Art. 900015 Flow Plus Absorbing a fall on a via ferrata puts your equipment under sudden and violent stress, and that’s why good quality gear is so important. At STUBAI, all our products are manufactured to combine maximum safety with ease of use and comfort. This philosophy naturally applies as standard throughout our range of helmets, harnesses and via ferrata sets. Harnesses Vario Full harnesses (chestwaist combinations) prevent the wearer from tipping backwards in the event of a fall, and are aimed at rucksack wearers. Since the majority of falls occur whilst sport climbing, our sports harnesses are padded in the hip and thigh area. Alpine climbers require more equipment, so we have provided their harnesses with more gear loops. The Vario is a hybrid waist and chest harness. The waist harness can be detached to be used on its own if required. Low volume and weight make this an ideal harness for mountaineering, glacier touring or via ferrata tours. On the gear loop there is enough room for extra kit, and all straps are adjustable. Weight 515 g Art. 998020 Combi The Combi is a very comfortable and easily adjustable harness combination, developed specially for via ferrata use. As you do not need much equipment on a via ferrata, this harness only requires two loops. Weight 675 g Art. 998025 Utility A general purpose adjustable chest harness. The Utility is compatible with sport climbing waist harnesses. CAUTION: Never wear a chest harness on its own! Weight 205 g Art. 998018 Rainbow Double A special children’s climbing harness. Equipped with 2 loops for gear and one more for the chalkbag. Fits waists of 50-65 cm. Weight 330 g Art. 998050 A sport climbing harness with 4 gear loops and an extra loop for attaching a chalkbag. With 4 buckles, the Double can be quickly adjusted to fit different sizes. This harness is very comfortable and extremely light. Weight 450 g (XS-M) Art. 998030 XS-M Art. 998035 L-XXL Climbing accessories Vertical Just right! A solid chalkbag with a large, easy-close opening. The Vertical has a brush holder as well as a zipped pocket for car keys, money and other small valuables. On the removable belt there is a whistle, and the high quality fleece inside keeps your chalk dry. Height 17 cm Weight 110 g Art. 950005 Vertical Standard Easy Pull This large figure of eight is great for smooth descents and dynamic belay. The Standard is made from anodized forged aluminium. Strength 30 kN Weight 109 g Art. 988125 The Easy Pull is a handy little twistable roller for reducing friction when using pulleys or for hauling. Perfect for ropes up to 11 mm diameter. CAUTION: Not for use for lifting people, and only for use as a secondary roller! Strength 12 kN Weight 40 g Art. 988501 Stubai BC Attach Classic belay with excellent braking ability, especially when used with a double or twin rope. Great for abseiling as it keeps the two rope strands apart. Weight 55 g Art. 988130 Our multi-purpose mini-karabiner. Ideal for fixing your hammer or as a key ring. CAUTION: Do not use for climbing! Strength 1,5 kN Weight 8 g Art. 977911 Belay Plus Rocky A safety set consisting of our HMS Pro karabiner with screwgate and the Stubai BC. This combination assures dynamic belay and can also be used for abseiling. Weight 150 g Art. S9000SET61 A well-balanced hammer for knocking-in pitons or bolt hangers with the aid of a drill. It has a rubber handle and a hanging hole. Length 30 cm Weight 590 g Art. 916401 10 1 2 3 4 Rock Pitons have many uses, but are especially useful for unforseeable situations such as retreats or accidents. STUBAI has been hand-forging these tools for many years. In accordance with EN 569, we have differentiated between safety pitons (S) and pitons for progressing (F). 2 Bong This is similar to the profile piton, but the two holes at the front can also be used to reduce the moment of force. Useful length max. 120 (S) mm Weight 165 g, Art. 931015 3 Diagonal Piton Head turned to 45 degrees, CrMoV-steel. Useful length 70 (F), 100 (S) and 130 (S) mm Weight 70, 95 and 125 g, Art. 93701. 4 French Form Piton Head turned to 90 degrees. High load resistance, CrMoV-steel. Useful length 35 (F), 55 (F) and 75 (F) mm Weight 55, 90 and 110 g, Art. 9380.. 5 Flat Blade Piton For narrow cracks – also in frozen rock. Useful length 20 (F) mm Weight 35 g, Art. 939255 6 5 Pitons 1 Profile piton High load resistant, slightly wedge-shaped piton for use as a leader, CrMoV-steel. Useful length 70 (F), 100 (S) and 115 (S) mm Weight 55, 105 and 110 g, Art. 93001. Cliffhanger 3-point For cracks and edges, but tape your sling to the rock to prevent it being levered out as you progress upwards. Length 75 mm Weight 35 g, Art. 940008 6 7 Cliffhanger round To be used similar to the cliffhanger 3-point. Length 100 mm Weight 35 g, Art. 940210 7 8 Soft Metal Piton To fit small cracks exactly, with head turned 90 degrees. Useful length 50 (F), 70 (F) and 90 (F) mm Weight 80, 90 and 110 g, Art. 9440.. 9 8 Ring Piton Diagonal Head at 45 degrees, with loose ring for use in abseiling. Useful length 95 (F) and 125 (F) mm Weight 135 and 165 g, Art. 95701. 10 V-Ring Piton The V-shape makes this piton widen as it is forced into a crack. The ring is ideal for abseiling. Useful length 140 (F) mm Weight 130 g, Art. 958016 9 10 11 12 13 11 Bolt Hanger Standard Made of stainless steel, EN 959 tested. Weight 38 g Art. 930510 Diam. 10 mm Art. 930511 Diam. 12 mm 12 Bolt Hanger Protect Similar to Bolt Hanger Standard, but avoids damage to the karabiners due to the rounded flange of the hole. Weight 40 g Art. 930610 Diam. 10 mm Art. 930611 Diam. 12 mm 13 Anchor UPAT Expansion anchor and nut made of stainless steel. Weight 50 g (10 mm) and 75 g (12 mm) Art. 930311 Diam. 10 mm Art. 930301 Diam. 12 mm 11 Crampons Whether a 4-point standard or a 13-point crampon for extreme situations, our models have been expressly crafted to suit all your needs. Our wide range is carefully manufactured and only from the best material, naturally. Our new ergonomic heel lever is our latest response to the demands of the modern crampon-compatible boots. Light An extra-light, strong, tempered aluminium crampon with flexible bar and four available binding systems. Through modern technology, we have been able to combine minimal weight with maximum strength. Ideal for ski touring, winter climbing and for easier mountaineering tours. With its light weight and economy of space, the Light is at home in any rucksack. Twin Peaks Professional Weight 630 g Art. 922109 with steel front bale and heel lever Short-point steel crampon. The flexible bar and missing front points mean greater flexibility. Also ideal for activity off the snow, like mountain running or walking on frozen-solid ground. Foresters, hunters and workmen all love our Twin Peaks too. Combi Classic Weight 630 g Art. 922107 with front cradle and heel lever Weight 670 g Art. 922610 with strap binding Universal Universal Weight 580 g Art. 922105 with cradle binding Classic Weight 540 g Art. 922103 with strap binding Light 12 Weight 710 g Art. 922620 with cradle binding Trekking Antislip Classic 10-point, tempered steel crampon, with flexible bar, available with four different binding systems, for trekking or easy mountaineering. Very compact! A small and extremely light crampon, for gaining grip in hard or slippery conditions. Ideal for spring tours when crossing tricky old snow patches. 4-point Classic Weight 280 g Art. 926510 Weight 790 g Art. 921903 with strap binding 6-point Weight 410 g Art. 926520 Professional Combi Universal Weight 880 g Art. 921909 with steel front bale and heel lever Weight 880 g Art. 921907 with front cradle and heel lever Weight 820 g Art. 921905 with cradle binding Trekking 13 Crampons Our models with flexible bar as standard, fit sizes 38-44. For smaller or larger sizes (30-38, 44 -51) we can provide a bar on request – at no extra cost! CAUTION: The size of boot soles is not standardized, so we strongly recommend you fit your crampons before you buy. Accessories Tirol Anti Balling Plate Prevents a potentially dangerous build-up of snow and ice underneath the crampon between the points. Hard-wearing and cold-resistant. Art. 927010 for Twin Peaks Art. 927013 for Light and Trekking Art. 927015 for Tirol Professional Weight 1010 g Art. 921105 with steel front bale and heel lever Combi Flex Bars By changing the bar, your crampons can be adjusted to fit extra-small or extra-large boots (look Infobox). Art. 92177. for Light and X-Change Light Art. 92178. for Tirol Art. 92179. for Trekking, Twin Peaks and X-Change Flex Point Guards Rubber stoppers for crampon points to prevent damage to your rucksack and its contents. Art. 927001 14 12-point tempered spring steel mountaineering crampon with flexible bar, available with three different bindings. Crooked side points for safe traversing and horizontal front points to reduce the danger of slipping – especially useful on corned snow (firn). Weight 1010 g Art. 921103 with front cradle and heel lever Universal Weight 950 g Art. 921101 with cradle binding Tirol l X-Change X-Change Pro X-Change Introducing the new STUBAI X-Change – our complete all-rounder! Whether you want one or two frontpoints, a flexible or rigid bar, a lightweight or solid crampon for competition or for fun – the X-Change system can do it all! With just a few turns, the heel- and frontpoints can be changed. For all-terrain mountaineers, this complex system replaces the need for several pairs of specialized crampons, thereby saving both weight and space in your bag. With a rigid and crooked bar to fit your boot exactly. The front section can be tilted, and the included spur can be fixed onto the heel. Sizes 36-48 Weight 1250 g Art. 921401 X-Change Flex Spider Specialist crampon for ice climbers. The stiff bar and long frontpoints make this great value model an excellent choice for climbing with rigorous precision. Extra point at the heel for safer descents. Sizes 35-48 Weight 990 g Art. 921311 Same front as the X-Change Pro, but with the bar and heel of the model TIROL. The advantages of this model are greater comfort, more space in your bag and quick size adjustment – which makes it more versatile. The model is favoured by hire shops and ice-tower climbers alike. Weight 1110 g Art. 921403 X-Change Light With the lighter back section taken from our aluminium model LIGHT. Top performance combined with extreme light weight. Weight 930 g Art. 921405 X-Change Competition When every gram counts. No bar and no binding. Front and heel pieces for attachment directly to a rigid-soled boot. Top Tip: Ice skating boots are cheap, warm and also very light! Weight 470 g Art. 921407 15 Ice axes Sierra Blue Star Ibex An aristocrat amongst ice axes. A classic mountain guide’s axe with a massive forged and polished steel head. The Sierra meets the highest test standards. Length 50, 55, 60, 65, 70, 77 and 85 cm Weight 710-860 g Art. 9070.. with gripper, with wrist loop An excellent mountaineering all-rounder. Brilliant balance between the shaft and the forged steel head. Length 55, 60, 65, 70, 77 and 85 cm Weight 640-790 g (Art. 9041..) Weight 590-740 g (Art. 9040..) Art. 9041.. with gripper, with wrist loop Art. 9040.. without gripper, without wrist loop A lightweight glacier axe, with technically designed steel head. Length 50, 55, 60, 65, 70, 77 and 85 cm Weight 590-750 g Art. 9012.. with gripper, with wrist loop 16 Pro Star Pro Star A modern-style axe for the professional. The gently crooked shaft is for precise application on steep slopes, but still allows use as an anchor point in snow. Both shaft and toothed pick are made to the highest possible standards. Length 55, 60, 65 and 70 cm Weight 640-690 g (Art. 9022..) Weight 580-650 g (Art. 9023..) Art. 9022.. with gripper, with wrist loop Art. 9023.. without gripper, with wrist loop We have the right ice axe for every type of tour. STUBAI has developed a perfectly balanced range for the many facets of mountaineering. All models are of course CE-approved and manufactured to the usual top STUBAI standards. Tour Lite Telescope Tour Lite Tour Ultralite A trekking axe with aluminium head. Delivered with snow basket. It´s telescopic shaft can be adjusted according to individual requirements from 60 to 95 cm. Weight 540 g Art. 900799 with gripper, with wrist loop A touring axe with aluminium head, which despite its light weight, far exceeds European Standards for strength. With its strong shaft it can also be used as a ‘dead man anchor’. Length 55, 60, 65, 70, 77 and 85 cm Weight 420-570 g Art. 9007.. with gripper, with wrist loop A top quality aluminium construction makes this the lightest in our range! An ideal partner for difficult passages over hard corn snow (firn) on ski tours. Length 55, 65 and 75 cm Weight 340-440 g (Art. 9001..) Weight 320-420 g (Art. 9002..) Art. 9001.. without gripper, with wrist loop Art. 9002.. without gripper, without wrist loop 17 Ice tools Scorpion Our answer to the challenge of frozen waterfalls. The Scorpion excels with its fantastic balance and specially adapted shaft. The robust pick reduces ice splintering and is easy to place. The head is interchangeable with pick, hammer and flat adze. Also equipped with a finger guard and an ergonomical and easily detachable wrist loop. Weight 760 g (without wrist loop) Length 48 cm Art. 914610 with hammer head Art. 914611 with flat adze Scorpion Basic The extreme choice for steep ice faces and mountaineering. Uncompromising craftsmanship makes this an invaluable friend on the darkest north faces and on the world’s highest mountains. Weight 710 g (with wrist loop) Length 48 cm Art. 914670 with hammer head Art. 914675 with flat adze Scorpion Hornet Protect The Hornet Protect is a great value ice tool for those new to the sport. With a gently curving shaft, a finger guard and a detachable wrist loop, this tool just loves steep ice – whether it’s an ice tower or a frozen waterfall. Weight 705 g (with wrist loop) Length 46 cm Art. 914740 with flat adze Art. 914750 with hammer head Hornet Great value tool for use in extreme mountain and ice environments. The Hornet‘s attributes: simple, reliable and light weight – a great tool for beginners to develop their skills. Weight 630 g (with wrist loop) Length 46 cm Art. 914710 with flat adze Art. 914720 with hammer head Hornet 18 Sigma II An ice screw with very strong steel shaft and hardened 4-toothed drill bit. Hardened steel handle. Length 120, 170 and 220 mm Weight 135, 155 and 175 g Art. 96391. Ice screws Sigma STUBAI ice screws are famous for their excellent bite, their speed of placement, and their special finish, which makes it easier to remove the core. Sigma II Plus As the Sigma II, but with a built-in crank for even quicker application. Length 120, 170 and 220 mm Weight 165, 185 and 205 g Art. 96392. Sigma X-Press All Purpose Bag Although sharp points and teeth are essential at the ice-face, they can also represent an obvious and unnecessary hazard elsewhere. Our accessories can help make your sharp points safer. A tough little bag with straps to fix to your rucksack. Ideal for carrying your crampons, ice screws, pitons, etc. Art. 919008 Ice Axe Head Cover Art. 919006 Point Guard Art. 919010 Accessories A short ice screw with steel handle for tackling thinner ice sheets. Caution: Does not conform to EN, is not CE–tested! Length 80 mm Weight 75 g Art. 963931 19 Tour products Tecblade A hardened aluminium shovel with T-handle and 2-stage telescopic shaft. The shaft seat is integrated in the blade to help reduce space. The oval profile of the shaft increases both its strength and its performance. The flat blade and footplate on the shovel head make digging less exhausting. Holes specially cut for rescue techniques. Weight 730 g Size of blade 22,50 x 26 cm Working length 92 cm Art. 996303 STUBAI tour products are an indispensable part of your gear on any tour. Our shovels are made exclusively from highest quality aluminium and deliver in even the most difficult circumstances. We also offer a full range of avalanche probes and even the ingenious Tecbag rucksack for putting them in. Voted ‘Best shovel in the Test’ by the reviewers of Germany’s leading mountain magazine ‘Alpin’! Tecblade Rescue Tour Mini Compact A professional avalanche shovel with large blade and holes specially for rescue techniques. D-shaped pro-grip for ease of use. Weight 845 g Size of blade 25 x 28 cm Working length 100 cm Art. 996415 Classic avalanche shovel. Its comfortable working length and large blade have made it many friends amongst those who dig a lot. Great for checking the snow profile, digging a bivouac or building a kicker – and naturally also in an emergency. Weight 740 g Size of blade 25 x 28 cm Working length 90 cm Art. 996403 Despite its smaller dimensions the Mini still shifts a lot of snow thanks to its high-sided blade. T-gripped and telescopic, it is designed to take up a minimum of space in your rucksack. Weight 650 g Size of blade 24 x 24 cm Working length 76 cm Art. 996401 Very compact avalanche shovel, which can be speedily adjusted to three different positions: either folded, as a hack, or as a shovel. Its reliability and small size make it especially popular on expeditions. Weight 610 g Size of blade 20 x 23 cm Working length 60 cm Art. 996201 20 Carbon Rapid Extremely light avalanche probe with depth markings. Uses a simple pull-cord system for assembly which saves valuable time when you need it most. The mainly carbon structure in combination with aluminium means high stability and amazingly light weight. Ideal when every gram counts. Bag included. Weight 165 g Length 265 cm Art. 911415 Alu Rapid The Classic - a good value probe with depth markings, made from aluminium alloy. Same ease of use as the Carbon Rapid. Bag included. Weight 215 g Length 265 cm Art. 911425 Niro Rescue An avalanche probe for professional rescue teams made from durable stainless steel. With quick-release assembly system the probe can quickly be lengthened to 250 cm. For use in deeper snow three 50 cm extensions are included.The rescue team can extend this probe upon choice. Weight 990 g Length 400 cm (250 cm + 3 extensions included) Art. 911455 Tecbag Free Heels Simple universal binding system for use with any type of boot. Ideal for use on cross-country skis. Weight 720 g/pair Art. 927500 We believe we have thought of everything in the design of this all-round mountain rucksack. To list just the most important features: - Long zippers for easy handling - Attachments for snowboard, snow shoes, skis and ice axes - Drink-bag compatible - Built-in rain cover - Waterproof YKK zips - Removable net pocket (for helmet, damp clothing, etc.) - Inner compartment for avalanche shovel and probe - Anti-sweat system for the back area, with air channel and mesh pads. Weight 1400 g Volume 25 Liter Height 50 cm, width 30 cm, depth 20 cm Art. 950000 21 Steel karabiners Super 5000 1 STUBAI is one of the world’s leading steel karabiner manufacturers. We are proud that every day people all over the world put their trust in the quality of our products. Our precision manufacturing process and strict quality controls are all geared to your safety. 2 3 4 No. Model 5 6 7 Material Strength closed gate Strength minor axis Strength open gate Gate opening 1 Super 5000 with screw gate forged steel, galvanized 50 kN 10 kN 35 kN 16 mm 2 Asym. Oval with screw gate steel, galvanized 30 kN 10 kN 9 kN 21 mm 3 Oval with screw gate steel, galvanized 25 kN 10 kN 8 kN 21 mm 4 Oval 40 kN with screw gate steel, galvanized 40 kN 20 kN 15 kN 28 mm 5 Asym. D-Form with screw gate, silver steel, galvanized 34 kN 10 kN 10 kN 27 mm 5 Asym. D-Form with screw gate, black steel, galvanized 34 kN 10 kN 10 kN 27 mm 6 HMS with screw gate steel, galvanized 25 kN 10 kN 8 kN 24 mm 7 HMS symmetrical, with screw gate steel, galvanized 20 kN 27 mm 8 Firemans karabiner with safety pin forged steel, galvanized 20 kN 28 mm 9 Firemans karabiner with belt ring forged steel, galvanized 15 kN 51 mm 22 8 Tempered aluminium buckle with black anodized finish. For belts up to 45 mm width. Weight 98 g (adjustable) and 70 g (non-adjustable) 9 Weight Dimension According to Art. 245 g 116 x 60 mm EN 362, EN 12275, UIAA 121 978001 240 g 120 x 63 mm EN 362, EN 12275, UIAA 121 982002 240 g 122 x 63 mm EN 362, EN 12275, UIAA 121 982003 305 g 130 x 75 mm EN 362, EN 12275, UIAA 121 982501 228 g 110 x 74 mm EN 362, EN 12275, UIAA 121 985001 228 g 110 x 74 mm EN 362, EN 12275, UIAA 121 985041 223 g 109 x 70 mm EN 362, EN 12275, UIAA 121 987701 232 g 115 x 75 mm EN 362 987721 368 g 140 x 85 mm EN 362 488501 925 g 210 x 108 mm ÖN F4031 488601 Art. 971603 with steel adjustment plate Art. 971503 non-adjustable Minifly Pro Tempered aluminium karabiner with screw gate. CAUTION: Do not use for climbing! Strength 8 kN Weight 10 g Art. 970321 Skysports Click Fix 23 Concept & Consultants: Helmut Knoflach, Matthias Knaus, Edward Ward, Hansjörg Fink, Manfred Flür, Raimund Huter, Heinz Zak, Werner Niederkircher Graphic & Design: Werner Niederkircher www.nuovoline.at Coverphoto: Stefan Mayr Photo: Heinz Zak, Matthias Knaus, Alex Nuding, Werner Niederkircher Technical specifications may change without notice. Printing errors exceptet. © 2007 Stubai Werkzeugindustrie Stubai Werkzeugindustrie reg.Gen.m.b.H. 6166 Fulpmes | Austria | Dr. Kofler Straße 1 T +43 (0)5225 6960-0 | F +43 (0)5225 6960-12 office@stubai.com www.stubai-bergsport.com
